afs 4.3.3 software training course ——marketing dept
TRANSCRIPT
AFS 4.3.3 Software Training Course
——Marketing Dept
Steps for Programmer Connection:
1. Install AFS4.3.3
2. Connect the hearing aids and PC via Hi-pro (or Digital Hearing Aid Programmer)
3. Input client information
4. Detect information of the hearing aid
5. Connect the hearing aid
6. Enter fitting interface
1. Install AST Fitting System
Download Download AFS4.3.3 fittingAFS4.3.3 fitting software from our website or open the software from our website or open the AFS4.3.3 fitting software from CD-ROMAFS4.3.3 fitting software from CD-ROM, click the icon , click the icon , to , to implement and complete the AFS installation.implement and complete the AFS installation.
Web: http://www.austar-hearing.netWeb: http://www.austar-hearing.net
Install AST Fitting System
Double-click this icon
Install AST Fitting System
Click “Next”
Install AST Fitting System
Click “Next”
Install AST Fitting System
If you have installed low version of fitting software, The Installation path of the 4.3.3 should be the same with the low version. So it can save and protect original clients’ information.
Click “Next”
Install AST Fitting System
Click “Next”
Install AST Fitting System
Install AST Fitting System
Click “Next”
Install AST Fitting System
Click “Install”
Install AST Fitting System
Install AST Fitting System
Click “Finish”
Install AST Fitting System
The metal face of the flexible strip and the battery door as illustrated should be back-to-back
2. Connect the hearing aids Insert the programming cable into the corresponding left ear or right ear of the Hi-pro (or digital hearing aid programmer), and insert the flexible strip of programming cable into the hearing aid.
2. Connect the Hearing Aids
To program BTE OE 、 RIC
To program the Custom-made Hearing Aids 、 Faceplate kits and InstantFit Hearing Aids
To program BTE
3. Input Client InformationIf you have already recorded your patient’s information in this software, click to select the existing relevant patient from the box.
You can also input name of the patient on corresponding column and click “Search”. The information such as number, name, gender, etc will show in the blank below. Then click “Select”, and you can enter the interface of client data.
3. Input Client InformationIf this is your first time to use this fitting software, or you need to make a record for a new patient, close the dialog box of “Find”, then you will see the following illustration for recording new client information on your screen.
3. Input Client InformationKey in basic information and audiogram of the patient, and click “Save” button, then go “fitting”.
4. Detect information of the Hearing Aids
Click “Detect”
5. Connect the Hearing Aids
Click “ Connect ” in the tool menu, then the hearing aids will be connected. When Click “Connect”, the originally-stored data of the hearing aid will also be read
7. Enter fitting interface
If you are fitting a new hearing aid, click “Autofit” in tool menu, then make further adjustment according to client’s response.
If you are fitting an used hearing aid, stored data of the aid will be read when you click “Connect”. Then you can keep on fitting. Or you can click “Autofit” for re-fitting.
Thank you !