afsc 2a6x6 aircraft electrical and environmental systems

DEPARTMENT OF THE AIR FORCE CFETP 2A6X6Headquarters US Air Force Parts I and IIWashington, DC 20330-1030 October 2002

AFSC 2A6X6

AIRCRAFT ELECTRICAL ANDENVIRONMENTAL SYSTEMS

CAREER FIELD EDUCATIONAND TRAINING PLAN

CFETP 2A6X6, October 2002

1

CAREER FIELD EDUCATION AND TRAINING PLANAIRCRAFT ELECTRICAL & ENVIRONMENTAL SYSTEMS

AFSC 2A6X6, OCTOBER 2002

Table of ContentsPART I Page #Preface 2

Abbreviations/Terms Explained 3

Section A--General Information 5Purpose of the CFETPUse of the CFETPCoordination and Approval of the CFETP

Section B--Career Progression and Information 6Specialty DescriptionSkill/Career Progression

Apprentice Level (3)Journeyman Level (5)Craftsman Level (7)Superintendent Level (9)

Training DecisionsCommunity College of the Air ForceCareer Field PathBase/Unit Education and Training Manager Checklist

Section C--Skill Level Training Requirements 13PurposeTraining Requirements

Apprentice Level (3)Journeyman Level (5)Craftsman Level (7)Superintendent Level (9)

Section D--Resource Constraint 15

PART IISection A, Specialty Training Standard (STS) 15

Section B, Course Objective List 262

Section C, Support Material 263

Section D, Training Course Index 264

Section E, MAJCOM Unique Requirements 271

Supersedes: CFETP 2A6X6, Aug 2000 Certified by: HQ USAF/ILMM (CMSgt McMahan)Number of Printed Pages: 273OPR: 364 TRS/TRR (Dale Chitwood, GS-12)(DSN 736-2772/EMAIL [email protected])


2

AIRCRAFT ELECTRICAL AND ENVIRONMENTAL SYSTEMS SPECIALTYCAREER FIELD EDUCATION AND TRAINING PLAN

AFSC 2A6X6OCTOBER 2002

PART I

PREFACE

1. This Career Field Education and Training Plan (CFETP) is a comprehensive education and trainingdocument that identifies life-cycle education/training requirements, training support resources, and minimumcore task requirements for 2A6X6, Aircraft Electrical and Environmental Systems Specialty. The CFETP willprovide personnel a clear career path to success and instills rigor in all aspects of career field training. ThisCFETP supersedes 2A6X6 CFETP, August 2000.

NOTE: Civilians occupying associated positions will use Part II to support duty position qualification training.

2. The CFETP consists of two parts. Supervisors will use both parts to plan, manage, and control training .

2.1 Part I provides information necessary for overall management of the specialty. Section A explains howeveryone will use the plan. Section B identifies career field progression information, duties and responsibilities,training strategies, and career field path. Section C associates each level with specialty qualifications(knowledge, education, training, and other). Section D indicates resource constraints to accomplishing this plan,such as funds, manpower, equipment, and facilities. Section E identifies transition training guide requirementsfor SSgt through MSgt.

2.2 Part II includes the following: Section A identifies the Specialty Training Standard (STS) and includesduties, tasks, technical references to support training; Air Education and Training Command (AETC) conductedtraining, wartime course/core task and correspondence course requirements; Section B contains the courseobjective list/training standards supervisors will use to determine if airmen have satisfied training requirements;Section C identifies available support materials, such as Qualification Training Package (QTP) which may bedeveloped to support proficiency training. These packages are indexed in AFIND8, Numerical Index ofSpecialized Educational Training Publications; Section D identifies a training course index supervisors can useto determine if resources are available to support training. Included here are both mandatory and optionalcourses; Section E identifies MAJCOM unique training requirements supervisors can use to determineadditional training required for the associated qualification needs.

3. Using guidance provided in the CFETP will ensure individuals in this specialty receive effective and efficienttraining at the appropriate point in their career. This plan will enable us to train today’s work force fortomorrow’s jobs. At unit level, supervisors and trainers will use Part II to identify, plan, and conduct trainingcommensurate with the overall goals of this plan.


3

ABBREVIATIONS/TERMS EXPLAINED

Advanced Training. Formal course which provides individuals who are qualified in their Air Force Specialty(AFS) with additional skills/knowledge to enhance their expertise in the career field. Training is for selectedcareer airmen at the advanced level of an AFS.

Air Force Job Qualification Standard (AFJQS). A comprehensive task list that describes a particular jobtype or duty position. Supervisors use the AFJQS to document task qualifications. The tasks of AFJQS arecommon to all persons serving in the described duty position.

Career Field Education and Training Plan (CFETP). A CFETP is a comprehensive, multipurpose documentcovering the entire spectrum of education and training for a career field. It outlines a logical growth plan thatincludes training resources and is designed to make career field training identifiable, to eliminate duplication,and to ensure this training is budget defensible.

Continuation Training. This is additional training that exceeds minimum upgrade requirements and has anemphasis on present or future duty assignments.

Core Task. Tasks that the Air Force Career Field Manager (AFCFM) identifies as minimum qualificationrequirements within an Air Force Specialty. Only a percentage of critical tasks for each system are listed asmandatory core tasks. This gives units needed flexibility to manage their workforce training. Core tasksidentified with *R are optional for ANG and AFRC.

Course Objective List (COL). A publication identifying the tasks and knowledge requirements, and respectivestandards provided to achieve a 3-/7-level in this career field. Supervisors use the COL to assist in conductinggraduate evaluations in accordance with AFI 36-2201, Developing, Managing and Conducting TrainingPrograms

Enlisted Specialty Training (EST). A mix of formal training (technical school) and informal training (on-the-job) to qualify and upgrade airmen in each skill level of a specialty.

Exportable Training. Additional training via computer assisted, paper text, interactive video, or othernecessary means to supplement training.

Field Technical Training (Type 4). Special or regular on-site training conducted by a training detachment(TD) or by a mobile training team (MTT).

Initial Skills Training. A formal school course that results in the award of a 3-skill level AFSC.

Instructional System Development (ISD). A deliberate and orderly process for developing, validating, andreviewing instructional programs that ensures personnel are taught the knowledge and skills essential forsuccessful job performance.

Occupational Survey Report (OSR). A detailed report showing the results of an occupational survey of tasksperformed within a particular AFS.

On-the-Job Training (OJT). Hands-on, over-the-shoulder training at the duty location used to certifypersonnel for both skill level upgrade and duty position qualification.


4

Qualification Training (QT). Actual hands-on task performance training designed to qualify an airman in aspecific duty position. This training program occurs both during and after the upgrade training process. It isdesigned to provide the performance skill/knowledge training required to do the job.

Qualification Training Package (QTP). An instructional course designed for use at the unit to qualify or aidqualification in a duty position or program or on a piece of equipment. It may be printed, computer based, or inother audiovisual media.

Resource Constraints. Resource deficiencies, such as money, facilities, time, manpower, or equipment, thatprecludes desired training from being accomplished.

Specialty Training Standard (STS). An Air Force publication that describes an Air Force Specialty in termsof tasks and knowledge an airman may be expected to perform or to know on the job. It serves as a contractbetween AETC and the functional user to show which of the overall training requirements for an AFSC aretaught in formal schools, Career Development Courses, and exportable courses.

Training Setting. The type of forum in which training is provided (formal resident school, on-the-job, fieldtraining, mobile training team, self-study, etc.).

Upgrade Training. A mixture of mandatory courses, task qualification, QTPs, and CDCs required for award ofthe 3-, 5-, 7-, or 9-skill levels.

Utilization and Training Workshop (U&TW). A forum, co-chaired by the AFCFM and Training PipelineManager (TPM), of MAJCOM Air Force Specialty Code (AFSC) functional managers, Subject Matter Experts(SMEs), and AETC training personnel that determines career ladder training requirements.


5

SECTION A - GENERAL INFORMATION

1. Purpose of the CFETP. This CFETP provides the information necessary for Air Force Career FieldManager (AFCFM), MAJCOM functional managers (MFMs), commanders, training managers, supervisors, andtrainers to plan, develop, manage, and conduct an effective career field training program. This plan outlines thetraining that individuals in AFSC 2A6X6 should receive in order to develop and progress throughout theircareer. This CFETP identifies initial skill, upgrade, qualification, advanced, and proficiency training. Initialskills training is the AFS specific training an individual receives upon entry into the Air Force or upon retraininginto this specialty for award of the 3-skill level. This training is conducted by AETC at Sheppard AFB, TX.Upgrade training identifies the mandatory courses, task qualification requirements, and correspondence coursecompletion requirements for award of the 3-, 5-, 7-, 9-skill levels. Qualification training is actual hands-on taskperformance training designed to qualify an airman in a specific duty position. This training program occursboth during and after the upgrade training process. It is designed to provide the performance skills/knowledgerequired to do the job. Advanced training provides individuals who are qualified in their Air Force Specialty(AFS) with additional skills/knowledge to enhance their expertise in the career field. . Proficiency training isadditional training, either in-residence or exportable advanced training courses, or on-the-job training, providedto personnel to increase their skills and knowledge beyond the minimum required for upgrade. The CFETP hasseveral purposes, some are:

1.1. Serves as a management tool to plan, manage, conduct, and evaluate a career field training program. Also,it is used to help supervisors identify training at the appropriate point in an individual’s career.

1.2. Identifies tasks and knowledge training requirements for each skill level in the specialty and recommendseducation/training throughout each phase of an individual's career.

1.3. Lists training courses that are available in the specialty and identifies sources of training, and the trainingdelivery method.

1.4. Identifies major resource constraints which impact full implementation of the desired career field trainingprocess.

2. Use of the CFETP. This CFETP will be used by MFMs and supervisors at all levels to ensurecomprehensive and cohesive training programs are available for each individual in the specialty.

2.1. AETC training personnel will develop/revise formal resident, non-resident, Training Detachment (TD), andexportable training based upon requirements established by the users and documented in Part II of the CFETP.They will also work with the AFCFM to develop acquisition strategies for obtaining the resources needed toprovide the identified training.

2.2. MFMs will ensure their training programs complement the CFETP mandatory initial, upgrade, andproficiency requirements. OJT, resident training, contract training, or exportable courses can satisfy theseidentified requirements. MAJCOM developed training, to support this AFSC, must be identified for inclusionin this plan and must not duplicate other available training resources.

2.3. Each individual will complete the mandatory training requirements specified in this plan. The list ofcourses in Part II will be used as a reference to support training.


6

3. Coordination and Approval. The AFCFM is the approval authority. The using MAJCOM representativesand AETC training personnel will identify and coordinate on the career field training requirements. The AETCtraining manager for AFSC 2A6X6 will initiate an annual review of this document by AETC and MFM toensure currency and accuracy. Using the list of courses in Part II, they will eliminate duplicate training.

SECTION B - CAREER FIELD PROGRESSION AND INFORMATION

4. Specialty Descriptions.

4.1. Specialty Summary. The Aircraft Electrical & Environmental Specialist performs and supervises aircraftelectrical and environmental (E&E) functions and activities. Troubleshoots, inspects, removes, installs, repairs,modifies, overhauls, and operates aircraft E & E systems, components, and associated support equipment.Related DoD Occupational Subgroup: 602.

4.2. Duties and Responsibilities:4.2.1. Aircraft Electrical and Environmental Systems Apprentice and Journeyman: Inspects,troubleshoots, installs, and maintains aircraft power and air distribution systems, subsystems, components, andtest equipment using proper technical publications. Visually and operationally tests aircraft electrical andenvironmental systems and components. Systems maintained include direct and alternating current powersystems; aircraft landing, anti-skid, and steering systems; flight and fuel control systems; ignition and electronicengine controls; master caution and warning panels; fire and overheat warning systems; lighting systems; andstatic and rotary inverters. Also included are systems and components such as bleed air distribution systems; airconditioning, cabin pressurization, NESA glass, and anti-icing systems; oxygen systems; fire extinguishingsystems; and turbine drive engine starters; in-flight blade inspection system (IBIS); tail skid system; cargowinch/hoist. Repairs, modifies, and overhauls batteries; electrical and solid state voltage regulators; control,protection, caution, and warning panels; frequency and load, and NESA glass controllers; static and rotaryinverters; transformer rectifiers; generators; actuators; relays; timing and sensing devices; systems amplifiers;fire, audible warning, and asymmetry detectors; motors; lighting equipment; cryogenic containers; and otherspecial equipment. Uses electrical and electronic meters and test equipment such as: Manometers; cabinpressure leak and temperature control system testers; thermal switch testers; anti-G suit valve testers; air turbinemotor testers; liquid oxygen system testers; multimeters; and ammeters. Services, inspects, and overhauls liferaft inflation equipment. Replaces, fabricates, or modifies electrical wiring and connectors. Checks for andtreats corrosion. Inspects, services, and performs general aircraft handling procedures. Uses technical orders andschematic diagrams to isolate malfunctions. Maintains inspection and maintenance records. Records pertinentdata on equipment maintenance data collection (MDC) forms and/or enters data into automated maintenancedata systems. Recommends methods to improve equipment performance and maintenance procedures.Handles, labels, and disposes of hazardous materials and waste according to environmental standards.4.2.2. Aircraft Electrical and Environmental Systems Craftsman: Inspects, analyzes, troubleshoots, andmaintains aircraft electrical and environmental systems, associated components, subsystems, and testequipment. Advises on problems operating and maintaining aircraft electrical and environmental systems,associated electronic components, subsystems, and test equipment. Solves maintenance problems using wiringdiagrams, schematic diagrams, and technical publications by analyzing operating characteristics of electrical andenvironmental systems. Determines proper maintenance procedures to repair and return systems andcomponents to maximum efficiency. Diagnoses malfunctions and recommends corrective actions. Checksinstalled and repaired components to ensure compliance with technical publications and directives. Evaluatesrequirements and prepares quality deficiency reports. Supervises and evaluates job performance and


7

maintenance techniques used to interpret, operate, troubleshoot, remove, repair, service, overhaul, and installaircraft electrical and environmental systems and components. Provides training and task certification for skilllevel advancement. Ensures compliance with published safety guidelines. Ensures hazardous materials andwaste are handled, stored, and disposed of according to environmental standards.4.2.3. Maintenance Superintendent: Manages maintenance and staff functions on aircraft electrical andenvironmental, hydraulic, fuel, and aircrew egress systems. Interprets and evaluates directives and publications,inspection findings, records, and reports and recommends corrective actions. Determines operational status andevaluates operational effectiveness of aircraft and associated systems. Inspects and evaluates maintenanceactivities and resolves problems. Interprets and establishes safety and training guidelines. Plans, organizes,directs, and controls troubleshooting and repair activities of maintenance personnel. Establishes priorities forcompletion of maintenance tasks and provides assistance in solving maintenance, supply, and personnelproblems. Performs supervisory inspections of, and directs maintenance actions on aircraft systems andcomponents. Evaluates aircraft and system failures to determine need to submit quality deficiency reports.Controls resources, funds, and cost management. Manages handling, storing, and disposing of hazardous mate-rials and waste according to environmental standards.

5. Career Skill Progression. Adequate training and timely progression from the apprentice to thesuperintendent skill level play an important role in the Air Force's ability to accomplish its mission. It isessential that everyone involved in training do their part to plan, develop, manage, and conduct an effectivetraining program. The guidance provided in this part of the CFETP will ensure each individual receives viabletraining at appropriate points in their career

5.1. Apprentice (3-level): Upon completion of initial skills training, a trainee will work with a trainer toenhance their knowledge and skills. They will utilize the Career Development Course, Task QualificationTraining, and available exportable courses for continued advancement. Once task certified, a trainee mayperform the task unsupervised. Apprentices can be considered for appointment as unit trainers after completionof a formal trainer course.

5.2. Journeyman (5-level). Once upgraded to the 5-level, the journeyman will enter into continuation trainingto broaden their experience base by increasing their knowledge and skill in troubleshooting and solving morecomplex problems. Five-levels may be assigned job positions such as quality assurance and various staffpositions. After having 48 months in the Air Force, 5-levels will attend Airman Leadership School (ALS) toenhance their Professional Military Education (PME). Five-levels will be considered for appointment as unittrainers. Individuals will use their CDCs to prepare for Weight Airman Promotion testing. They should alsoconsider continuing their education toward a Community College of the Air Force (CCAF) degree.

5.3. Craftsman (7-level): A craftsman can expect to fill various supervisory and management positions suchas shift leader, element chief, expediter, section chief, and task certifier. They can also be assigned to work instaff positions. Craftsmen should take courses to obtain added knowledge on management of resources andpersonnel. Continued academic education through CCAF and higher degree programs is encouraged. Inaddition, when promoted to TSgt, individuals will complete the Noncommissioned Officer Academy.

5.4. Superintendent (9-level): A 9-level can be expected to fill positions such as flight chief, productionsupervisor, and various staff NCOIC jobs. Additional training in the areas of budget, manpower, resources, andpersonnel management should be pursued through continuing education. Individuals promoted to SMSgt willcomplete the Senior Noncommissioned Officer Academy. Additional higher education and completion ofcourses outside their career AFSC are also recommended.


8

6. Training Decisions: The CFETP uses a building block approach (simple to complex) to encompass theentire spectrum of training requirements for the Aircraft Electrical and Environmental Systems Career Field.The spectrum includes a strategy for when, where, and how to meet these training requirements. The strategymust ensure we develop affordable training, eliminate duplication, and prevent a fragmented approach totraining. The following training decisions were made by MAJCOM Functional Managers and Subject MatterExperts (SMEs) at the career field Utilization and Training Workshop held at Sheppard AFB, 3-7 December2001.

6.1. Initial Skills: The overall content of what is currently being taught in Course J3ABR2A636 008 isoutstanding. Recent GAS survey results indicate a 91% satisfaction rating by supervisors of new trainees. Athorough review of the course was accomplished to assess currency of proficiency codes, core tasks, resourceconstraints, and any other recommendations needed to improve the course. The course content basicallyremained the same. A few minor changes will be required in order to meet user needs. Those changes areinternal issues that will be addressed by the 364 Training Squadron. The establishment of new trainingrequirements created some equipment constraints. In order to eliminate/reduce those constraints, the followingequipment will be needed:

• 2 Wire Maintenance Kit• 1 New LOX Video• 2 Time Domain Reflectometer• 15 IETMs Laptops

6.2. Five-Level Upgrade Training: The following changes to the 2A656 Career Development Course areneeded:

• Volume 1 will require a supplement. A lesson on Interactive/Electronic Technical Manuals will need tobe developed and the lessons on processing and controlling material and funds management/depot levelreparable deleted.

• Volume 3 will require a rewrite. Lessons on Databus Channels/Principles operational fundamentals,troubleshooting an emergency generator system, and troubleshooting a single generator system willneed to be developed.

• Volume 5 will require a rewrite. The Oxygen cryotainer cart lesson needs draining and cleaningcomponents added, and a new lesson on Nitrogen cryotainer carts developed, that covers operationalfundamentals on a Libby or Zwick liquid cart. Removing and installing gaseous oxygen systemcomponents needs to be deleted

6.3. Seven-Level Upgrade Training.6.3.1 The following changes to the 2A676 Career Development Course are needed:

• Volume 1 will require a rewrite. A lesson on troubleshooting an emergency generator system will needto be developed. The current multi-generator lesson will be changed so as to utilized the C-17 multi-generator system. The lessons on using a Time domain reflectometer and elements of physics need to bedeleted


9

6.3.2. After reviewing Course J3ACR2A676 001, Aircraft Electrical & Environmental Systems Craftsman, thebelow deletions and additions need to be made. These changes will not reduce or added to the total time of 69hours. The changes made are as follows:

• Objective 1A ORM has been moved to objective 2A and expanded to include the 6 Steps and 7 Tools ina more in-depth explanation of the processes involved.

• Objective 2A, Explosive Safety, has been deleted. ORM has been added. Radiation Hazards has beenadded. Flight line safety during vehicle operation has been added.

• Objective 2B reflect changes from U&TW for implementation in the lesson plan. 623A documentationwhen, why and how to document has been added/

• Objective 2C, STS items A2.4.1, A2.4.2 are deleted from the course. A2.7.2, A2.7.3, A2.7.4, A2.7.5.1,A2.7.5.2, and A2.7.5.3 have been move to Objective 2D. This objective will now only include theMESL, A2.4.8, and will be reduced from 13 hours to 4 hours. Objective 2D (add) STS items A2.7.2,A2.7.3, A2.7.4, A2.7.5.1, A2.7.5.2 and A2.7.5.3 and delete A2.7.8 and A2.7.9. Increase lesson to 8hours.

• Objective 2E, Technical Order Improvement Report and Idea Program, A2.9.6 and change proficiencycode to 2b.

• Objective 3A, no changes.• Objective 3B change lesson to include 7-level students inspecting previous maintenance accomplished

by 3-level students in block 6. They will be required to brief the instructor of their findings. STS itemsA3.19.5 will change to a 3c and A3.22.1.4 will change to a 3c. The time will remain at 12 hours.

• Objective 3C, no change required.• An objective will be added covering personal accountability as a production inspector.

6.4. Proficiency Training. Any additional knowledge and skill requirements which were not taught throughinitial skills or upgrade training were assigned to continuation training. The purpose of the continuation trainingprogram is to provide additional training exceeding minimum upgrade training requirements with emphasis onpresent and future duty positions. MAJCOMSs must ensure individuals in Aircraft Electrical andEnvironmental Systems career field receive the necessary training at the appropriate point in their career.

7. Community College of the Air Force (CCAF) Academic Programs. Enrollment in CCAF occurs uponcompletion of basic military training (BMT). CCAF provides the opportunity to obtain an Associates inApplied Sciences Degree. In addition, CCAF offers the following:

7.1. Occupational Instructor Certification. Upon completion of instructor qualification training, consistingof the Basic Instructor Course (BIC) and supervised practice teaching, CCAF instructors who possess anassociates degree or higher may be nominated by their school commander/commandant for certification as anoccupational instructor.

7.2 Trade Skill Certification. When a CCAF student separates or retires, a trade skill certification is awardedfor the primary occupational specialty. The college uses a competency based assessment process for trade skillcertification at one of four proficiency levels; Apprentice, Journeyman, Craftsman/Supervisor, or MasterCraftsman/Manager. All are transcribed on the CCAF transcript.


10

7.3. Degree Requirements: All airmen are automatically entered into the CCAF program. Prior to completingan associate degree, the 5-level must be awarded and the following requirements must be met:

Semester HoursTechnical Education................................................................................................. 24Leadership, Management, and Military Studies......................................................... 6Physical Education ..................................................................................................... 4General Education .................................................................................................... 15Program Elective ...................................................................................................... 15 Technical Education; Leadership, Management, and Military Studies; or General EducationTotal ......................................................................................................................... 64

7.3.1. Technical Education (24 Semester Hours): Completion of the initial skills resident training atSheppard AFB satisfies all or part of the technical education requirement.7.3.2. Leadership, Management, and Military Studies (6 Semester Hours): Professional military educationand/or civilian management courses.7.3.3. Physical Education (4 Semester Hours): This requirement is satisfied by completion of Basic MilitaryTraining.7.3.4. General Education (15 Semester Hours): Courses must meet the definition of General Educationsubjects/courses as provided in the CCAF General Catalog.7.3.5. Program Elective (15 Semester Hours): Satisfied with applicable Technical Education; Leadership,Management, and Military Studies. Six semester hours of CCAF degree-applicable technical credit otherwisenot applicable to this program may be applied. See the CCAF General Catalog for details regarding theAssociates of Applied Science for this specialty. Additional off-duty education is a personal choice that isencouraged for all.

7.4. AETC Instructor Requirements. Individuals desiring to become an Air Education and TrainingCommand Instructor should be actively pursuing an associate's degree. It is necessary for instructors to have atleast an associate's degree so the Technical School can maintain accreditation through the Southern Associationof Colleges and Schools.


11

8. Career Field Path

8.1. Enlisted Career Path. Table 8.1 identifies career milestones for the 2A6X6 Air Force Specialty.

Table 8.1 Enlisted Career PathGrade Requirements

Education and Training Requirements Rank AverageSew-On

EarliestSew-On

High Year Of Tenure(HYT)

Basic Military Training SchoolApprentice Technical School (3-Skill Level) Amn

A1C6 months

16 monthsUpgrade To Journeyman (5-Skill Level)- Minimum 15 months on-the-job training.- Complete all 5-level core tasks on one MDS.- Complete appropriate CDC if/when available.

AmnA1CSrA

6 months16 months

3 years 28 months 10 Years

Airman Leadership School (ALS)- Must be a SrA with 48 months time in service

or be a SSgt Selectee.- Resident graduation is a prerequisite for SSgt

sew-on (Active Duty Only).Trainer

- Qualified and certified to perform the task tobe trained.

- Have attended the formal trainer’s course andappointed in writing by Commander.

Certifier- Be at least a 5-skill level SSgt; and qualified and certified

to perform the task being certified- Attend formal certifier course and appointed in writing by

Commander.- Be a person other than the trainer.

Upgrade To Craftsman (7-Skill Level)- Minimum rank of SSgt.- Complete all 5- and 7-level core tasks on one

mission design aircraft.- Complete appropriate CDC if/when available.- Advanced Technical School.- Minimum 12 months on-the-job training.

SSgt 7.5 years 3 years 20 Years

Noncommissioned Officer Academy (NCOA)- Must be a TSgt or TSgt Selectee.- Resident graduation is a prerequisite for MSgt

sew-on (Active Duty Only).

TSgt

MSgt

12.5 years

16 years

5 years

8 years

22 Years

24 YearsUSAF Senior NCO Academy (SNCOA)- Must be a SMSgt or SMSgt Selectee.- A percentage of top non-select (for promotion

to E-8) MSgts attend the SNCOA each year.- Resident or correspondence graduation is a

prerequisite for CMSgt sew-on.

SMSgt 19.2 years 11 years 26 Years

Upgrade To Superintendent (9-Skill Level)- Minimum rank of SMSgt.- Resident or correspondence graduate of

SNCOA.

CMSgt 21.5 years 14 years 30 Years


12

8.2. Base/Unit Education and Training Manager Checklist:

Table A8.2. Base/Unit Education and Training Manager ChecklistRequirements for Upgrade to: Y NJourneyman- Has the apprentice completed mandatory CDCs, if available?- Has the apprentice completed all appropriate 5-level core tasks identified in the CFETP?- Has the apprentice completed all other duty position tasks identified by the supervisor?- Has the apprentice completed 15 months training (9 months for retrainees) for award of the

5-skill level?- Has the apprentice met mandatory requirements listed in specialty description, AFMAN 36-2108

(Airman Classification), and CFETP?- Has the apprentice been recommended by their supervisor?Craftsman- Has the journeyman achieved the rank of SSgt?- Has the journeyman completed mandatory CDCs?- Has the journeyman completed all core tasks identified in the CFETP?- Has the journeyman completed all other duty position tasks identified by the supervisor?- Has the journeyman attended 7-skill level Craftsman Course?- Has the journeyman completed a minimum 12 months UGT for award of the 7-skill level?

TO: Squadron/CC

FROM: Squadron Training Manager

SUBJECT: Upgrade Trainee

Trainee is prepared to be upgraded and has completed all training requirements.

_______________________ _______________________ Training Manager Supervisor


13

SECTION C - SKILL LEVEL TRAINING REQUIREMENTS

9. Purpose. Skill level training requirements in this career field are defined in terms of tasks and knowledgerequirements. This section outlines the specialty qualification requirements for each skill level in general termsand establishes the mandatory requirements for entry, award, and retention of each skill level. The specifictasks and knowledge training requirements are identified in Part II, Section A, Specialty Training Standard(STS) and Section B of this CFETP.

10. Specialty Qualification Requirements. . The various skill levels in this career field are defined in termsof tasks and knowledge proficiency requirements for each skill level. They are stated in broad general terms andestablish the standards of performance. Unit work centers must develop a structured training program to ensurethe following requirements are met.

10.1. Apprentice Level Training.10.1.1. Specialty Qualification:10.1.1.1. Knowledge: Knowledge is mandatory of: electrical, electronic, and mechanical principles applying toaircraft E & E systems; concepts and application of maintenance directives; using and interpretation of wiringdiagrams, blueprints, and technical orders; and proper handling, use, and disposal of hazardous waste materials.Apprentices must be qualified to remove and install system components, perform operational checks, andtroubleshoot simple malfunctions using system schematics.10.1.1.2. Education: For entry into this specialty, completion of high school with courses in basic electronics,mathematics, general science and mechanics is desirable.10.1.1.3. Training: For award of AFSC 2A636, completion of a basic aircraft E&E systems maintenancecourse is mandatory.10.1.1.4. Experience: There is no experience necessary for entry into AFSC 2A636.10.1.1.5. Other: For entry into this specialty, normal color vision as defined in AFI 48-123 is mandatory.10.1.2. Training Sources. The initial skills course, J3ABR2A636 009, Aircraft Electrical and EnvironmentalSystems Apprentice will provide the required knowledge and qualifications. Initial skills training encompasseselectrical and environmental system theory and operation, electrical and electronic principles, systemcomponents, component removal and installation, introduction to maintenance concepts, general flight linemaintenance practices, use of technical publications, maintenance documentation, and support equipmentfamiliarization and use.10.1.3. Implementation. Upon graduation from Basic Military Training, airmen are assigned to the 82dTraining Wing for completion of Course J3ABR2A636 009, Aircraft Electrical and Environmental SystemsApprentice. Completion of this course will result in award of the 3-skill level.

10.2. Journeyman Level Training:10.2.1. Specialty Qualification:10.2.1.1. Knowledge: In addition to the 3-level qualifications, a 5-level must possess the knowledge and skillsnecessary to maintain electrical and environmental systems and associated subsystems. An individual must betask qualified on inspecting aircraft electrical and environmental systems and components, troubleshooting andcorrecting system malfunctions, and repairing and replacing system components. Journeymen performoperational checks, component repair, and use and maintenance of test and support equipment. Individuals canapply the proper handling, use, and disposal of hazardous waste and materials.10.2.1.2. Education: There are no formal education requirements for upgrade to 2A656.10.2.1.3. Training: Requirements for the Journeyman level require completion of the 5-level CDC andcompletion of the core tasks specified in the STS.


14

10.2.1.4. Experience. Qualification in and possession of AFS 2A636 and completion of all 5-level core taskson one MDS aircraft identified in the STS is mandatory.10.2.1.5. Other: Normal color vision as defined in AFI 48-123 is mandatory.10.2.2. Training Sources and Resources. The 5-level CDC provides the career knowledge training required.Qualification training and OJT will provide training and qualification on the core tasks identified in the STS, orAFJQS. The CDC is written to build from the trainee's current knowledge base, and provides more in-depthknowledge to support OJT requirements.10.2.3. Implementation. The units utilizing this STS, exportable courses, and CDCs perform training to the 5-level. Upgrade to the 5-level requires completion of the 2A655 CDC and 15 months upgrade training.

10.3. Craftsman Level Training:10.3.1. Specialty Qualification.10.3.1.1. Knowledge. In addition to the 5-level qualifications, an individual must possess advanced skills andknowledge of theory, concepts, principles and application of electrical and environmental systems. The 7-levelmust be able to supervise and train personnel to maintain electrical and environmental systems. They must beable to plan, schedule, and organize maintenance to ensure effective utilization of available resources.Qualification is required on advanced repair, inspection, troubleshooting, and diagnostic techniques. Historicaldocumentation analysis is also required for all 7-levels.10.3.1.2. Education. There are no additional education requirements beyond those defined for the apprenticelevel.10.3.1.3. Training. Completion of CDC 2A676, CDC 2AX7X, and the resident 7-level course, J3ACR2A676003, at Sheppard AFB TX is mandatory for upgrade to AFSC 2A676.10.3.1.4. Experience. Completion of all required 7-level core tasks as identified in the STS, and qualificationin and possession of AFSC 2A656. Also, experience performing or supervising functions such as installing,maintaining, or repairing aircraft E & E systems.10.3.1.5. Other. Normal color vision as defined in AFI 48-123 is mandatory.10.3.2. Training Sources and Resources. Seven-level upgrade training will be conducted by certified trainersusing AF core tasks, unit/MAJCOM specific courses, and the formal 7-level course, J3ACR2A676-000. The7-level CDC and resident courses are written to provide advanced system and management knowledge, andtroubleshooting skills.10.3.3. Implementation. The units utilizing the STS, and CDCs perform training to the 7-level. Upgrade tothe 7-level requires completion of CDC 2AX7X and CDC 2A675, completion of all core tasks, 12 monthsupgrade training, completion of the advanced (Craftsman) in-resident technical school, and promotion to E-5.

10.4. Superintendent Level Training (9-Level).10.4.1. Specialty Qualification.10.4.1.1. Knowledge. In addition to 7-level qualifications, an individual must possess advanced skills andknowledge of concepts and principles in the management of aircraft maintenance. The 9-level needs to be aneffective leader; must be able to forecast, budget and manage funds and other resources; and must beknowledgeable of all environmental standards and ensure adherence to the proper handling and disposal ofhazardous materials.10.4.1.2. Education. There are no additional requirements beyond those defined for the apprentice level.10.4.1.3. Training. For award of AFSC 2A690, completion of the Senior NCO Academy and promotion toSMSgt is mandatory10.4.1.4. Experience. Qualification in and possession of AFSC 2A676. Also, experience managing ordirecting repair activities for electrical and environmental systems and associated maintenance functions.10.4.1.5. Other. Normal color vision as defined in AFI 48-123 is mandatory.10.4.2. Training Sources and Resources. The Senior NCO Academy and unit OJT will be used for training.


15

10.4.3. Implementation. The 9-level will be awarded after completing MAJCOM requirements, unit OJT andpromotion to SMSgt. Individuals must attend the Senior NCO Academy in-residence or complete thecorrespondence course.

SECTION D - RESOURCE CONSTRAINTS

11. Purpose: This section of the CFETP identifies known resource constraints which precludeoptimum/desired training from being developed or conducted. Included is a narrative explanation of eachresource constraint, an impact statement describing the effect on training, the resources needed, and actionsrequired to satisfy the training requirements.

12. Apprentice Level Training.

12.1. Constraints. Two training requirements listed in Attachment 2 are constrained based on availability ofequipment at the 364 Training Squadron.

• A2.11.5 Use wire maintenance kit 2b/X• A2.9.3. Use interactive/electronic technical manuals 2b/X

12.2. Resources Required. Two wire maintenance kits are required to support training on item A2.11.5. Usewire maintenance kit. Fifteen laptop computer are required to support training on item A2.9.3. Useinteractive/electronic technical manuals.

13. Journeyman Level Training. No constraints noted.

14. Craftsman Level Training. No constaints noted.

PART II

SECTION A - SPECIALTY TRAINING STANDARD

1. Implementation. This STS will be used for technical training provided by Air Education and TrainingCommand (AETC) for classes beginning 03 Oct 2002.

2. Purpose. As prescribed in AFI 36-2201, this STS:

2.1. Lists in the column 1 (Task, Knowledge, and Technical Reference) the most common tasks, knowledge,and technical references (TR) necessary for airmen to perform duties in the 3-, 5-, and 7-skill level. An asterisk(*) before the number indicates a wartime course objective.

2.2. Identifies in column 2 (Core Tasks) by asterisk (*), specialty-wide training requirements for skill levelupgrade training. Core tasks identified with an *R are optional for the AFRC and the ANG. MAJCOMFunctional Managers, commanders, and supervisors may designate additional critical tasks as necessary. Whendesignated, certify these critical tasks using normal core task certification procedures. As a minimum,certification on all AFCFM directed core tasks applicable to the specialty must be completed for skill levelupgrade. Exemptions:


16

2.2.1. Core tasks which are not applicable to base assigned aircraft or equipment are not required for upgrade(units are not required to send personnel TDY for core task training)2.2.2. For units with more than one mission design (e.g. A-10) aircraft, upgrade trainees need only completecore tasks on a single mission design. MFMs, unit commanders, and/or supervisors may require trainees tocomplete core task training on additional mission design aircraft, if desired. If some of these core tasks involvetraining in another unit on base, trainees must still complete all core tasks relevant to at least one mission designaircraft. Flightline-assigned personnel must complete backshop core tasks and vice versa. All units are boundby the requirements in this CFETP and will accommodate core task trainees from other units.2.2.3. Units that use the GO81 maintenance data collection system do not need to complete Core AutomatedMaintenance System (CAMS) Computer Based Training (CBT) core tasks. However, these units must becapable of training CAMS related CBT core tasks for deployment preparation. This capability ensures GO81users are capable of operating CAMS prior to deploying to CAMS using units.

2.3. Provides certification for OJT. Column 3 is used to record completion of tasks and knowledge trainingrequirements. Use automated training management systems to document technician qualifications, if available.Task certification must show a certification completed date.

2.4. Shows formal training and correspondence course requirements. Column 4 shows the proficiency to bedemonstrated on the job by the graduate as result of training on the task/knowledge and the career knowledgeprovided by the correspondence course. When two codes are used in columns 4A and 4C(1) (e.g. 2b/b), the firstcode is the established requirement for resident training on the task/knowledge, and the second code indicatesthe level of training provided in the course due to equipment shortages or other resource constraints. SeeCADRE/AFSC/CDC listing maintained by the unit training manager for current CDC listing.

2.5. Qualitative Requirements. Attachment 1 contains the proficiency code key used to indicate the level oftraining and knowledge provided by resident training and career development courses.

2.6. Job Qualification Standard. Becomes a job qualification standard (JQS) for on-the-job training whenplaced in AF Form 623, On-The-Job Training Record, and used according to AFI 36-2201. For OJT, thetasks in column 1 are trained and qualified to the go/no go level. "Go" means the individual can perform the taskwithout assistance and meets local requirements for accuracy, timeliness, and correct procedures. When used asa JQS, the following requirements apply:2.6.1 Documentation. Document and certify completion of training IAW AFI 36-2201. Automated records,utilizing Core Automated Management System (CAMS) or Integrated Maintenance Data System (IMDS),reflecting this STS may be used and are highly encouraged. Use of attachments one, two and four aremandatory in individual training records along with CFETP Part I and Part II, Section A. Use of at least one ofattachments three, or five through fifteen is required. Identify duty position requirements by circling (in pencil)the subparagraph number next to the task statement. As a minimum, complete the following columns in Part 2of the CFETP: date training completed, trainee initials, trainer initials, and certifier initials (core tasks only).Trainers may sign off non-core and non-critical tasks by initialing the trainer's column; third party certificationis not required for non-core and non-critical tasks. There are no approved AFJQS for this AFSC.2.6.1.1. Converting from Old Document to CFETP. All AFJQSs and previous CFETPs are replaced by thisCFETP; therefore, conversion of all training records to this CFETP STS is mandatory. Use this CFETP STS (orautomated STS) to identify and certify all past and current qualifications.


17

2.6.1.1.1. For those core and critical tasks previously certified and required in the current duty position,evaluate current qualifications and when verified, recertify using current date as completion date, and entertrainee's and certifier's initials. Remember, during the transcription process no training is taking place.Therefore, the trainer's initials are not required.2.6.1.1.2. For non-core and non-critical tasks previously certified and required in the current duty position,evaluate current qualifications and when verified, recertify using current date as completion date, and entertrainee's and trainer's initials.2.6.1.1.3. When transcribing previous certification for tasks not required in the current duty position, carryforward only the previous completion date of certification (not the initials of another person). If and whentranscribed tasks become duty position requirements, recertify using standard certification procedures.2.6.1.1.4. The person whose initials appear in the trainer or certifier block during the transcription process mustmeet the requirements of their respective roles.2.6.1.1.5. Upon completion of the transcription process, give the old CFETP to the member.2.6.1.2. Documenting Career Knowledge. When a CDC is not available: the supervisor identifies CFETPPart II training references that the trainee requires for career knowledge and ensures, as a minimum, that traineescover the mandatory items in AFI 36-2108. For two-time CDC course exam failures: Supervisors identify allPart II items corresponding to the areas covered by the CDC. The trainee completes a study of references,undergoes evaluation by the task certifier, and receives certification on the CFETP Part II. Supervisors mustdocument successful completion of career knowledge prior to submission of a CDC waiver.2.6.1.3. Decertification and Recertification. When an airman is found to be unqualified on a task previouslycertified for his or her position, the supervisor lines through the previous certification or deletes previouscertification when using automated system. Appropriate remarks are entered on the AF Form 623A, On-The-Job Training Record Continuation Sheet, as to the reason for decertification. The individual is recertified (ifrequired) either by erasing the old entries and writing in the new or by using correction fluid/tape (if the entrieswere made in ink) over the previously certified entry.2.6.2. AF Form 797. When additional items not listed in the CFETP Part II are necessary in the current dutyassignment, enter them on the 797. Fill out the form IAW AFI 36-2201.2.6.3. Disposition of Training Records. Upon separation, retirement, commissioning, or promotion to MasterSergeant (unless otherwise directed by the AFCFM, MAJCOM, unit commander, or supervisor), give theindividual their training records. Also, give individuals outdated training records after transcribing records. Donot remove any training records that show past qualifications unless transcribed to a new CFETP/AFJQS. Forexample, an individual working in a tool crib must maintain documented career field qualifications in case theyreturn to duty on the flightline or in the shop. Supervisors must exercise good judgment when removingtraining records not needed in current duty positions.

2.7. Specialty Training Standard. Is a guide for development of promotion tests used in the WeightedAirman Promotion System (WAPS). Senior NCOs with extensive practical experience in their career fieldsdevelops Specialty Knowledge Tests (SKTs) at the USAF Occupational Measurement Squadron. The testssample knowledge of STS subject matter areas judged by test development team members as most appropriatefor promotion to higher grades. Questions are based upon study references listed in the WAPS catalog.Individual responsibilities are in chapter 4 of AFI 36-2502, Airman Promotion Program. WAPS is notapplicable to the Air National Guard or Air Force Reserve.


18

3. Recommendations. Report unsatisfactory performance of individual course graduates to the AETCTraining Manager at 364 TRS/TRR, 511 9th Ave. Suite 1, Sheppard AFB TX, 76311-2338, DSN 736-2772.Reference specific STS paragraphs. For a quick response to problems, call our customer service informationline, DSN 736-2574.

BY ORDER OF THE SECRETARY OF THE AIR FORCE

OFFICIAL MICHAEL E. ZETTLER, Lieutenant General, USAFDCS/Installations and Logistics

15 ATTACHMENTS1. Proficiency Code Key (Mandatory)2. Training Requirements, Fundamentals (Mandatory)3. Training Requirements, Generic (Mandatory, except as indicated in note 1)4. Training Requirements, CDC 2AX7X (Mandatory)5. Training Requirements, B-2 (Optional)6. Training Requirements, C-5 (Optional)7. Training Requirements, C-9 (Optional)8. Training Requirements, C-17 (Optional)9. Training Requirements, C-130 (Optional)10. Training Requirements, C-141 (Optional)11. Training Requirements, F-15 (Optional)12. Training Requirements, F-16 (Optional)13. Training Requirements, KC-10 (Optional)14. Training Requirements, KC-135 (Optional)15. Training Requirements, MH-53J (Optional)

FUNDAMENTAL TRAINING REQUIREMENTSSTS 2A6X6, October 2002

19Attachment 2

This Block Is For Identification Purposes OnlyName Of TraineePrinted Name (Last, First, Middle Initial) Initials (Written) SSAN

Printed Name Of Training/Certifying Official And Written InitialsN/I N/I

N/I N/I

N/I N/I

N/I N/I

N/I N/I

N/I N/I

N/I N/I

N/I N/I

QUALITATIVE REQUIREMENTS

Proficiency Code KeyScaleValue

Definition: The individual

1 IS EXTREMELY LIMITED (Can do simple parts of the task. Needs to be told or shown how to do mostof the task.)

Task 2 IS PARTIALLY PROFICIENT (Can do most parts of the task. Needs only help on hardest parts.)

Performance 3 IS COMPETENT (Can do all parts of the task. Needs only a spot check of completed work.)

Levels 4 IS HIGHLY PROFICIENT (Can do the complete task quickly and accurately. Can tell or show othershow to do the task.)

a KNOWS NOMENCLATURE (Can name parts, tools, and simple facts about the task. )

*Task b KNOWS PROCEDURES (Can determine step by step procedures for doing the task. )

Knowledge c KNOWS OPERATING PRINCIPLES (Can identify why and when the task must be done and why eachstep is needed.)

Levels d KNOWS ADVANCED THEORY (Can predict, isolate, and resolve problems about the task.)

A KNOWS FACTS (Can identify basic facts and terms about the subject.)

**Subject B KNOWS PRINCIPLES (Can identify relationship of basic facts and state general principles about thesubject.)

Knowledge C KNOWS ANALYSIS (Can analyze facts and principles and draw conclusions about the subject.)

Levels D KNOWS EVALUATION (Can evaluate conditions and make proper decisions about the subject.)

Explanations* A task knowledge scale value may be used alone or with a task performance scale value to define a level of knowledge for a specific task. (Example: b and 1b)

** A subject knowledge scale value is used alone to define a level of knowledge for a subject not directly related to any specific task, or for a subject common toseveral tasks.

- This mark is used alone instead of a scale value to show that no proficiency training is provided in the courses or CDC’s.

/ This mark is used in course columns to show that training is required but not given due to limitations in resources (3c/b, 2b/b etc.).

Note: Tasks and knowledge items shown with an asterisk (*) in column one are trained during war time.


20Attachment 2

2. CoreTasks

3. Certification For OJT 4. Proficiency Codes Used To Indicate Training/Information Provided (See Attachment 1)

1. Tasks, Knowledge And Technical References A B C D E A3 Level

B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials

CertifierInitials Course CDC

(1)Course

(2)CDC

ATTACHMENT 2

NOTE 1: The tasks and knowledge listed in attachment 2 will be performed by all personnel in the Aircraft Electrical and Environmental System Specialty.

NOTE 2: Tasks and knowledge identified by an asterisk (*) in column 1 are trained in the resident wartime course.

NOTE 3: Users are responsible for annotating training references to identify current references pending STS revision.

NOTE 4: Items marked in columns 2a or 2b marked with a (*R) are optional core tasks for ANG and AFRC.

NOTE 5: Address comments and recommended changes through the MAJCOM Functional Managers to the AETC Training Manager, DSN 736-2772.

A2.1. SECURITY

A2.1.1. Communication Security (COMSEC)

TR: DOD 52001-R; AFP100-46

- - - -

A2.1.1.1. Information Security - - - -

*A2.1.2. Operations Security (OPSEC) specific vulnerabilities of AFSC 2A6X6

TR: 55-30

A - - -

A2.2. AF OCCUPATIONAL SAFETY AND HEALTH (AFOSH) PROGRAM

TR: AFIs 91-202, 91-302; Applicable OSHA and AFOSH standards

*A2.2.1. Hazards of AFSC 2A6X6 A B C -

*A2.2.2. AFOSH standards for AFSC 2A6X6 A B - -

A2.2.3. Use safety precautions

TR: AFI 21-101; AFOSH 91-66; TOs 00-25-234, 1-1A-14, 1-1A-15, 8D series, 11A series, 31-1-2, 32-1-101, 33C3; 15X-1-1series

*A2.2.3.1. With handtools 2b B - -

*A2.2.3.2. In shop 2b B - -

*A2.2.3.3. On flight line 2b B - -

A2.2.4. Nuclear safety/nuclear safety regulations

TR: AFRs 35-99,122-1, 122-4, 122-5

- A - -

*A2.2.5. Portable fire extinguishers

TR: AFOSH 91-56

A - - -

*A2.2.6. Initial Federal Hazard Communication Training Program (FHCTP)

TR: AFOSH TOs 48-21, 91-56, 91-66

A - - -

*A2.2.7. Explosive Safety Program

TR: AFMAN 91-201

A B - -

A2.3. HAZARDOUS MATERIALS AND WASTE HANDLING ACCORDING TO ENVIRONMENTAL STANDARDS

TR: AFI 23-504, EPA State Regulations

*A2.3.1. Types of hazardous material /fluids B B - -

*A2.3.2. Handling procedures B B - -


21Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A2.3.3. Storage and labeling B B - -

*A2.3.4. Proper disposal B B - -

A2.4. MAINTENANCE MANAGEMENT

A2.4.1. Logistics/OPS Group Organizational Structure

TR: AFI 21-101, MAJCOM Instructions

- B - -

A2.4.2. Basic functions within the maintenance complex

TR: AFI 21-101, MAJCOM Instructions

- B - -

A2.4.3. Funds Management/depot level reparable (DLR)

TR: AFM 23-110, AFI23-111

- - C -

A2.4.4. Status reporting

TR: AFI21-103

- A - -

A2.4.5. Mission Essential System List (MESL)

TR: AFI21-103

- - B -

A2.5. MAINTENANCE AND INSPECTION

*A2.5.1. Maintenance systems

TR: AFI 21-101 TO 00 Series

B B - -

*A2.5.2. Inspection systems

TR: TOs 00-20 series, 8-1-1, 1-1A-14

B B - -

A2.5.2.1. Perform acceptance/transfer inspection on aircraft - - - -

A2.5.2.2. Perform isochronal/phase inspections (A,B,C checks)

- - - -

A2.5.2.3. Perform other scheduled maintenance inspections (e.g. HSC, refurb, etc.)

- - - -

*A2.5.3. Process deficiency reports

TR: TO 00-35D-54

* A B - -

A2.5.4. AFTO 781 series forms

TR: TOs 00-20 series

- - -

*A2.5.5. Use AFTO Form 781A


* 2b B - -

*A2.5.6. Use AFTO Form 781H


* B B - -

*A2.5.7. Use AFTO Form 781K


* 2b B - -

A2.5.8. General Aircraft Procedures

TR: MAJCOM instructions, applicable aircraft TO/checklist

A2.5.8.1. Statically ground aircraft - - - -

A2.5.8.2. Open and close engine cowling - - - -

A2.5.8.3. Remove and install aircraft maintenance panels - - - -


22Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A2.5.8.4. Use aircraft interphone system - - - -

A2.5.8.5. Perform aircraft egress - - - -

A2.5.8.6. Inspect/use ground maintenance stands - - - -

A2.5.8.7. Select/use restraint harness(e.g. Fall protection/prevention equipment)

- - - -

A2.5.8.8. Operate aircraft radios - - - -

A2.5.8.9 Jack Team member - - - -

A2.5.8.10 Marshall aircraft - - - -

A2.5.8.11 Tow Team member - - - -

A2.5.8.12 Refuel/defuel member - - - -

A2.6. USE AUTOMATED MAINTENANCE SYSTEM

A2.6.1. GO81

TR: AFM 66-267,66-278, TO 00-20

A2.6.1.1. Use GO81 - - - -

A2.6.1.2. 9050 - Open aircraft discrepancies - - - -

A2.6.1.3. 9010 - Close aircraft discrepancies - - - -

A2.6.1.4. 9099 - MDC/close aircraft discrepancies * - - - -

A2.6.1.5. 8063 - Jobs closed, no MDC taken - - - -

A2.6.1.6. 9032 - Generate aircraft flying forms - - - -

A2.6.1.7. 9128 - Build repairable item processing tag(AFTO Form 350)

- - - -

A2.6.1.8. 8044 - Supply information on a particular aircraft - - - -

A2.6.1.9. 8057 - Tail number bin (TNB) list - - - -

*A2.6.2. Use CAMS

TR: AFCSM 21-556

* 2b B - -

A2.6.2.1. Complete CBT course number J6ANU00066-043,CAMS for Flightline and Backshop

* - - - -

A2.7. SUPERVISION

A2.7.1. Orient new personnel

TR: AFIs 36-2108, 36-2202

- - - -

A2.7.2. Assign personnel to work crews

TR: AFI 21-101

- - C -

A2.7.3. Plan work assignments and priorities

TR: AFI 21-101

- - C -

A2.7.4. Schedule work assignments

TR: AFI 21-101

- - C -

A2.7.5. Establish

TR: AFI 21-101, 00-20 Series TOs

A2.7.5.1. Work methods - - C -


23Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A2.7.5.2. Controls - - C -

A2.7.5.3. Performance standards - - C -

A2.7.5.4. Personal accountability - - C -

A2.7.6. Evaluate work performance of subordinate personnel

TR: Applicable aircraft/shop TOs

- - C -

A2.7.7. Resolve technical problems for subordinate personnel

TR: Applicable aircraft/shop TOs

- - - -

A2.7.8. Counsel personnel and resolve individual problems - - - -

A2.7.9. Initiate action to correct substandard performance by personnel

TR: AFIs 36-2503, 36-2907

- - - -

A2.8. TRAINING

TR: AFI 36-2201

A2.8.1. Career Field Education and Training Plan (CFETP)

A2.8.1.1. Maintain CFETP - - B -

A2.8.1.2. Interpret CFETP - - B -

A2.8.2. Management of training

TR: AFI 21-101, AFI 36-2201

- B - -

A2.8.3. Evaluate personnel to determine need for training - - - -

A2.8.4. Plan and supervise OJT

A2.8.4.1. Conduct training - - - -

A2.8.4.2. Counsel trainees on their progress - - - -

A2.8.4.3. Monitor effectiveness of training - - - -

A2.8.5. Evaluate effectiveness of training programs/trainingevaluation reports

- - - -

A2.8.6. OJT trainer requirements

A2.8.6.1. Prepare teaching outlines or tasks breakdowns - - - -

A2.8.6.2. Provide trainees theory and training on actual equipment

- - - -

A2.8.6.3. Provide feedback on training provided - - - -

A2.8.7. OJT task certifier requirements

A2.8.7.1. Provide supervisor and trainer feedback on results of training provided and trainee’s strengths/weaknesses

- - - -

A2.9. TECHNICAL PUBLICATIONS

*A2.9.1. Fundamentals of the technical order system

TR: TO 00-5 series

B B - -

*A2.9.2. Use technical manuals for specific equipment

TR: TO 00-5-1 (sec II and V)

* 2b B - -


24Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A2.9.3. Use interactive/electronic technical manuals 2b/X A - -

*A2.9.4. Use abbreviated technical orders

TR: TO 00-5-1 (sec II)

* 2b B - -

*A2.9.5. Use methods and procedures technical orders

TR: TO 00-XX series

2b B - -

A2.9.6. Use standard publications

TR: AFI, AFMAN, AFPAM series

- B - -

*A2.9.7. Technical order improvement report

TR: TO 00-5-1 (sec VIII)

A B 2b -

*A2.9.8. Time compliance technical order

TR: TO 00-5-15

A B - -

A2.9.9. Maintain technical publications - - - -

A2.10. AF SUPPLY DISCIPLINE

TR: AFMAN 23-110, AFI 23-111, 21-101

A2.10.1. Research parts

TR: TO 00-20 series

- - - -

*A2.10.2. Property accountability A B C -

A2.10.3. Principles of supply - B - -

*A2.10.4. Issue and turn-in procedures A B - -

*A2.10.5 Use of issue and turn-in forms 2b B - -

*A2.10.6. Use Standard Base Supply System (SBSS)

TR: AFM 23-110

2b B - -

A2.10.7. Supply reports - - B -

A2.10.8. Utilize equipment allowance standards - - - -

A2.11. ELECTRICAL AND ENVIRONMENTALFUNDAMENTALS

TR: AFI 21-101; AFOSH 91-66; TOs 00-25-234,1-1A-8, 1-1A-14, 32-1-101

*A2.11.1. Composite toolkit (CTK) program A B - -

*A2.11.2. Use handtools 2b B - -

A3.11.3. Use duct reflanging/reforming tool - - - -

A2.11.4. Solder electrical connections

*A2.11.4.1. Conventional devices * 2b B - -

A2.11.4.2. Solid state devices - B - -

A2.11.4.3. Advanced soldering - - - B

*A2.11.5 Use wire maintenance kit 2b/X - - -

A2.11.6. Use solderless electrical connector devices

*A2.11.6.1. Connector plugs * 2b B - -

*A2.11.6.2. Splices * 2b B - -


25Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A2.11.6.3. Terminals * 2b B - -

A2.11.6.4. Wire bundle

*A2.11.6.4.1. Remove 2b - - -

*A2.11.6.4.2. Repair 2b - - -

*A2.11.6.4.3. Install 2b - - -

A2.11.6.4.4. Modular blocks - - - -

*A2.11.7. Corrosion control A B - -

*A2.11.8. Use safetying devices * 2b B - -

A2.11.9. Use safety cables - - - -

*A2.11.10. Use appropriate hardware * 2b B - -

*A2.11.11. Special wiring: special purpose wire, compact wire bundle, electrical magnetic pulse (EMP) hardened cable

A B - -

A2.11.12. Engine wiring harness

A2.11.12.1. Inspect - - - -

A2.11.12.2. Repair - - - -

A2.11.13. Benchcheck - - - -

A2.11.14. Protect exposed electrical connectors, open pressure lines, and ducting

- - - -

A2.11.15. Remove

A2.11.15.1. Switches/protective devices - - - -

A2.11.15.2. Relay/socket - - - -

A2.11.15.3. Proximity sensors/switch - - - -

A2.11.15.4. Transformer/power supply - - - -

A2.11.15.5. Circuit cards - - - -

A2.11.15.6. Integration matrix box - - - -

A2.11.16. Install

A2.11.16.1. Switches/protective devices - - - -

A2.11.16.2. Relay/socket - - - -

A2.11.16.3. Proximity sensors/switch - - - -

A2.11.16.4. Transformer/power supply - - - -

A2.11.16.5 Circuit cards - - - -

A2.11.16.6. Integration matrix box - - - -

A2.11.17. Fabricate flexible conduits/wiring harness - - - -

A2.12. AIRCRAFT FAMILIARIZATION

TR: Applicable aircraft TOs

*A2.12.1. Principles of flight B - - -

*A2.12.2. Location of structural components A - - -

*A2.12.3. Location of system components A - - -


26Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A2.12.4. Glass cockpit A - - -

A2.12.5. Operate malfunction display/mission computer display

- - - -

A2.12.6. Smoke and fire detection/suppression procedures - - - -

A2.12.7. Operate mission computer - - - -

A2.12.8. Operate maintenance monitor/interface (built-in test) panel

- - - -

*A2.12.9. Databus Channels/Principles A B - -

A2.13. ELECTRICAL/ELECTRONIC FUNDAMENTALS

TR: TO 00-25-234; 31-1-141 series; applicable aircraft TOs

*A2.13.1. DC fundamentals: Electron theory, magnetism, voltage generation, Kirchhoff’s law, Ohm’s law, resistance and power formulas, DC motors, control protective devices

B B - -

*A2.13.2. AC fundamentals: Inductors, capacitors, voltage generation, transformers, AC motors

B B - -

*A2.13.3. Electronic fundamentals: Solid state devices, power supplies, amplifiers circuits, electronic voltage regulators, logic gates

B B - -

*A2.13.4. Use wiring diagrams * 2b B - -

*A2.13.5. Use schematics * 2b B - -

*A2.13.6. Use troubleshooting techniques 1b B - C

*A2.13.7. Electrostatic discharge (ESD) A B - -

A2.14. ELEMENTS OF PHYSICS

TR: ???

*A2.14.1. Temperature B B - -

*A2.14.2. Pressure B B - -

*A2.14.3. Atmosphere B B - -

*A2.14.4. Air flow B B - -

A2.15. BATTERY SHOP

TR: AFOSH 91-66, TOs 8D2-2 series, 8D2-3 series,33C3 series

A2.15.1. Nickel-Cadmium

*A2.15.1.1. Battery fundamentals B B - -

A2.15.1.2. Operate charging equipment * - - - -

A2.15.1.3. Maintain charging equipment - - - -

A2.15.1.4. Service batteries * - B - -

A2.15.2. Lead acid

TR: TOs 8D2-1-31, 33A1 series

*A2.15.2.1. Battery fundamentals B B - -

A2.15.2.2. Operate charging equipment * - - - -


27Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A2.15.2.3. Maintain charging equipment - - - -

A2.15.2.4. Service batteries * - B - -

A2.16. CRYOTAINER SYSTEM

TR: AFOSH standards; TOs 34Y5 series, 35D3 series, 35D29 series, 36G2 series, 37C2 series, 37C11-3-1, 15X-1-1

A2.16.1. Operational fundamentals

*A2.16.1.1. Oxygen B B - -

*A2.16.1.2. Nitrogen B B - -

A2.16.2. Oxygen cryotainer/cart

A2.16.2.1. Operational check *R - - - -

A2.16.2.2. Troubleshoot - B - -

A2.16.2.3. Drain - B - -

A2.16.2.4. Purge - B - -

A2.16.2.5. Evacuate - B - -

A2.16.2.6. Repair components - - - -

A2.16.2.7. Remove components *R - - - -

A2.16.2.8. Install components *R - - - -

A2.16.2.9. Leak check *R - B - -

A2.16.2.10. Inspect *R - B - -

A2.16.2.11. Clean components - B - -

A2.16.3. Nitrogen cryotainer/cart

A2.16.3.1. Operational check - - - -

A2.16.3.2. Troubleshoot - - - -

A2.16.3.3. Drain - - - -

A2.16.3.4. Purge - - - -

A2.16.3.5. Evacuate - - - -


A2.16.3.7. Remove components - - - -

A2.16.3.8. Install components - - - -

A2.16.3.9. Leak check - - - -

A2.16.3.10. Inspect - - - -

A2.16.4. LN2 GSU Truck



A2.16.4.3. Drain - - - -

A2.16.4.4. Purge - - - -

A2.16.4.5. Evacuate - - - -


28Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




A2.16.4.9. Leak check - - - -

A2.16.4.10. Inspect - - - -

A2.16.5. Gaseous nitrogen/ oxygen servicing carts


A2.16.5.2. Inspect - - - -


A2.16.5.6 Install components - - - -

A2.16.5.7. Leak check - - - -

A2.16.5.8. Clean components - - - -

A2.16.6. Purge unit GSU 62/M


A2.16.6.2. Inspect - - - -



A2.17. METERS AND TESTERS

TR:: Applicable 33 series TOs

A2.17.1. Use insulation tester - B - -

A2.17.2. Use decade box - B - -

*A2.17.3. Use ECS tester 2b - - -

A2.17.4. Use electrical/pneumatic component testers - - - -

*A2.17.5. Use oxygen system regulator tester 2b B - -

*A2.17.6. Use sonic leak detector 2b B - -

A2.17.7. Use cockpit cabin pressure leakage tester - B - -

*A2.17.8. Use anti-skid tester 2b B - -

*A2.17.9. Use bonding meter A B - -

A2.17.10. Load Bank

A2.17.10.1. Use - B - -


A2.17.10.3. Repair - - - -

*A2.17.11. Use multimeter * 2b B - -

*A2.17.12. Use igniter circuit tester a B - -

A2.17.13. Use oscilloscope - - - B

*A2.17.14. Use time domain reflectometer A B 2b -

A2.17.15. Perform periodic/inspections/pre-use inspections - - - -

A2.17.16. Maintenance/repair on test equipment - - - -


29Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A2.17.17. Locally manufactured test equipment

A2.17.17.1. Use - - - -


A2.17.17.3. Repair - - - -

A2.17.18. Bench check/repair air conditioning temperature control box tester

- - - -

A2.17.19. Use linear and rotary actuator test stand - - - -

A2.17.20. Troubleshoot/repair linear and rotary actuator teststand

- - - -

A2.17.21. Use flap/slat brake tester - - - -

A2.17.22. Constant speed drive/generator test stand

A2.17.22.1. Use - B - -


A2.17.22.3. Repair - - - -

A2.17.23. Use frequency meters/counters - - - -

A2.17.24. Use fire system tester - - - -

A2.17.25. Use fire detection control unit tester - - - -

A2.17.26. Empenage de-ice controller tester

A2.17.26.1. Use - - - -


A2.17.26.3. Repair - - - -

A2.17.27. K735 test set components

A2.17.27.1. Use - - - -


A2.17.27.3. Repair - - - -

A2.17.28. Use TTU-205 - - - -

A2.17.29. Use micron gauge - - - -

A2.17.30. Use ultraviolet light - - - -

*A2.17.31. Operate wiring marking machines 2b - - -

A2.17.32. Use pneumatic system tester (electrical/nitrogen) - - - -

A2.17.33. Use windshield anti-ice system tester - - - -

A2.17.34. Use Jet-Cal tester - - - -

A2.17.35. Use Temp- Cal tester - - - -

A2.17.36. Use vacuum pump - - - -

A2.17.37 Use landing gear control panel tester- - - - -

A2.17.38 Use throttle quadrant tester - - - -

A2.18. Inspect/Repair Explosion Proof lights - - - -


30Attachment 2

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A2.19. LIFE RAFT INFLATION EQUIPMENT

TR: AFOSH standards; TO 14S1 series, 8 series component TOs


A2.19.2. Life raft inflation equipment - B - -

A2.19.3. Slide inflation equipment - - - -

A2.19.4. Service Bottles - B - -

A2.19.5. Inspect System Components

A2.19.5.1.. Life raft inflation cylinder recharging equipment - - - -

A2.19.6. Repair

A2.19.6.1. Bottles - - - -

A2.19.6.2. Life raft inflation cylinder recharging equipment - - - -

A2.19.7. Service/leak check slide/raft bottles - - - -

GENERIC TRAINING REQUIREMENTSSTS 2A6X6, October 2002

31Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 3

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 3 will be performed by personnel assigned to maintain aircraft not listed in specificCFETP Attachments.

NOTE 2: Tasks and knowledge identified by an asterisk (*) in column 1 are trained in the resident wartime course.




A3.1. AC POWER SYSTEM

TR: Applicable aircraft TOs, 8 series component TOs

*A3.1.1. Operational fundamentals B B - -

A3.1.2. Operational check

A3.1.2.1. 60 Hertz system - - - -

A3.1.2.2. Co-pilot instrument power system - - - -

A3.1.2.3. BPCU interrogation/bite check - - - -

A3.1.2.4. Main generator System

*A3.1.2.5. Single generator 2b - - -

A3.1.2.6. Multi-generator - - - -

*A3.1.2.7. Emergency generator System 2b - - -

A3.1.3. Troubleshoot

A3.1.3.1. 60 Hertz system - - - -

A3.1.3.2. Co-pilot instrument power system - - - -

A3.1.3.3. BPCU interrogation/bite check - - - -

A3.1.3.4 Main generator System

*A3.1.3.5 Single generator 2b B - -

A3.1.3.6 Multi-generator - B - C

*A3.1.3.7 Emergency generator System 2b B - C

A3.1.4. Inspect system components * - - - -

A3.1.5. Remove components

A3.1.5.1. AC generator control units - - - -

A3.1.5.2. CSD - - - -

A3.1.5.3. AC generators - - - -

A3.1.5.4. Generator/bus protection panels - - - -

A3.1.5.5. Generator voltage regulators - - - -

A3.1.5.6. Generator frequency load controllers - - - -

A3.1.5.7. Frequency control unit - - - -

A3.1.5.8. Bus tie/generator line contactor - - - -

A3.1.5.9. Inverter - - - -

A3.1.5.10. Circuit breaker panels - - - -


32Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.1.5.11. Relays - - - -

A3.1.5.12. Survivability/vulnerability (S/V) box - - - -

A3.1.5.13. CSD/IDG Filters - - - -

A3.1.5.14. Current transformer - - - -

A3.1.6. Repair components


A3.1.6.2. CSD - - - -

A3.1.6.3 AC generators - - - -




A3.1.6.7. Frequency control unit - - -


A3.1.6.9. Inverter - - - -


A3.1.7. Install components


A3.1.7.2. CSD - - - -





A3.1.7.7 Frequency control unit - - - -


A3.1.7.9. Relays - - - -

A3.1.7.10.. Survivability/vulnerability (S/V) box - - - -

A3.1.7.11. CSD/IDG Filters - - - -


A3.1.7. 13. Inverter - - - -

A3.1.7. 14. Circuit breaker panels - - - -A3.1.8. Bench check


A3.1.8.2. CSD - - - -





A3.1.8.7. Frequency control unit - - - -


33Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.1.8.9. Relays - - - -

A3.1.8.10. Inverter - - - -


A3.2. DC POWER SYSTEM



*A3.2.2. Operational check * 2b - - -

*A3.2.3. Troubleshoot 2b B - C



A3.2.5.1. Battery - - - -

A3.2.5.2. Battery charger - - - -

A3.2.5.3. Transformer rectifier - - - -

A3.2.5.4. Reverse current relays - - - -








A3.27.1. Battery - - - -

A3.2.7.2 Battery charger - - - -

A3.2.7.3 Transformer rectifier - - - -



A3.2.8. Bench check components





A3.3. EXTERNAL POWER SYSTEM




*A3.3.3. Troubleshoot 2b B - B



34Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.3.5.1. External power receptacle - - - -

A3.3.5.2. External power monitor - - - -

A3.3.5.3. Line contactor - - - -




A3.3.6.3. Line contactor - - - -

A3.3.7. APU power system

A3.3.7.1. Operational check * - - - -


A3.3.7.3. Inspect system components * - - - -

A3.3.7.4. Remove components

A3.3.7.4.1. Generator - - - -

A3.3.7.4.2. Generator control unit - - - -

A3.3.7.4.3. Line contactor - - - -

A3.3.7.4.4. Electronic control unit - - - -

A3.3.7.5. Repair components

A3.3.7.5.1. Generator - - - -


A3.3.7.6. Install components

A3.3.7.6.1. Generator - - - -


A3.3.7.6.3. Line contactor - - - -

A3.3.7.6.4. Electronic control unit - - - -

A3.4. LIGHTING SYSTEM



*A3.4.1.1. Interior B B - -

*A3.4.1.2. Exterior B B - -

*A3.4.1.3. Emergency B B - -

A3.4.1.4. UARRSI/AR receptacle - - - -


*A3.4.2.1. Interior * 2b - - -

*A3.4.2.2. Exterior * 2b - - -

*A3.4.2.3. Emergency * 2b - - -

A3.4.2.4. UARRSI/AR receptacle * - - - -



35Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A3.4.3.1. Interior 2b - - -

*A3.4.3.2. Exterior 2b - - -

*A3.4.3.3. Emergency 2b - - -

A3.4.3.4. UARRSI/AR receptacle - - - -

A3.4.4. Inspect

A3.4.4.1. Interior * - - - -

A3.4.4.2. Exterior * - - C -

A3.4.4.3. Emergency * - - - -

A3.4.4.4. UARRSI/AR receptacle * - - - -


A3.4.5.1. Interior *

A3.4.5.1.1. Control panel - - - -

A3.4.5.1.2. Dimmers/transformer - - - -

A3.4.5.1.3. Control box - - - -

A3.4.5.1.4. Light assemblies - - - -

A3.4.5.1.5. Power supply - - - -

A3.4.5.2. Exterior

A3.4.5.2.1.. Navigation/formation - - - -

A3.4.5.2.2. Anti-collision - - - -

A3.4.5.2.3. Strobe - - - -

A3.4.5.2.4. Surge suppressor - - - -

A3.4.5.2.5.. Strobe light power supply - - - -

A3.4.5.2.6. Landing light - - - -

A3.4.5.2.7. Taxi light - - - -

A3.4.5.2.8. Terrain clearance lights - - - -

A3.4.5.3. Emergency

A3.4.5.3.1. Emergency exit lights - - - -

A3.4.5.3.2. Control box - - - -

A3.4.5.3.3. Power supply - - - -

A3.4.5.3.4. UARRSI/AR receptacle - - - -

A3.4.5.3.5. Slipway lights - - - -

A3.4.5.3.6. Area lights - - - -


A3.4.6.1. Interior

A3.4.6.1.1. Control panel - - - -

A3.4.6.1.2. Control box - - - -


A3.4.6.2. Exterior


36Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.4.6.2.1. Navigation/formation - - - -


A3.4.6.2.3. Strobe - - - -

A3.4.6.2.4. Landing light - - - -

A3.4.6.2.5. Taxi light - - - -


A3.4.6.3. Emergency exit lights - - - -


A3.4.7.1. Interior *

A3.4.7.1.1. Control panel - - - -

A3.4.7.1.2. Dimmers/transformer - - - -

A3.4.7.1.3. Control box - - - -


A3.4.7.1.5. Power supply - - - -

A3.4.7.2. Exterior



A3.4.7.2.3. Strobe - - - -

A3.4.7.2.4. Surge suppressor - - - -

A3.4.7.2.5. Strobe light power supply - - - -

A3.4.7.2.6. Landing light - - - -

A3.4.7.2.7. Taxi light - - - -


A3.4.7.3. Emergency

A3.4.7.3.1. Emergency exit lights - - - -

A3.4.7.3.2. Control box - - - -

A3.4.7.3.3. Power supply - - - -

A3.4.7.3.4. UARRSI/AR receptacle - - - -

A3.4.7.3.5. Slipway lights - - - -

A3.4.7.3.6. Area lights - - - -


A3.4.8.1. Interior

A3.4.8.1.1. Control panel - - - -

A3.4.8.1.2. Control box - - - -


A3.4.8.2. Exterior




37Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.4.8.2.3. Strobe - - - -

A3.4.8.2.4. Landing light - - - -

A3.4.8.2.5. Taxi light - - - -


A3.4.8.3. Emergency exit lights - - - -

A3.5. LANDING GEAR SYSTEM



*A3.5.1.1. Control B B - -

*A3.5.1.2. Warning and indication B B - -


*A3.5.2.1. Control 2b - - -

A3.5.2.2. Position A - - - -

A3.5.2.3. Position B - - - -

A3.5.2.4. Position C - - - -

*A3.5.2.5. Warning and indication 2b - - -

A3.5.2.6. Crosswind crab system - - - -

A3.5.2.7. Interrogate proximity interference unit - - - -


*A3.5.3.1. Control * 2b B - C

*A3.5.3.2. Warning and indication * 2b B - C

A3.5.3.3. Crosswind crab system - - - -



A3.5.5.1. Landing gear control panel - - - -

A3.5.5.2. Landing gear control relay box - - - -

A3.5.5.3. Junction box - - - -

A3.5.5.4. Audible warning control - - - -

A3.5.5.5. Warning horn - - - -











38Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.5.7.4. Audible warning control - - - -







A3.6. ANTI-SKID SYSTEM



*A3.6.2. Operational check 2b - - -

*A3.6.3. Troubleshoot * 2b B - -



A3.6.5.1. Anti-skid control box - - - -

A3.6.5.2. Anti-skid transducer - - - -

A3.6.5.3. Spin-up control box - - - -



A3.6.6.2. Anti-skid transducer - - - -

A3.6.6.3. Spin-up control box - - - -

A3.7. BRAKE TEMPERATURE INDICATING SYSTEM


A3.7.1. Operational Fundamentals - - - -

A3.7.2. Operational Check - - - -

A3.7.3. Troubleshoot - - - -

A3.7.4. Inspect System components - - - -


A3.7.5.1. Temperature control unit - - - -

A3.7.5.2. Temperature sensor - - - -


A3.7.6.1. Temperature control unit - - - -


A3.8. NOSE GEAR STEERING SYSTEM




*A3.8.3. Troubleshoot 2b B - -


39Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.8.4. Inspect System Components - - - -


A3.8.5.1. Control unit - - - -

A3.8.5.2. Transducer - - - -

A3.8.6. Repair transducer - - - -


A3.8.7.1. Control unit - - - -

A3.8.7.2. Transducer - - - -

A3.9. PRIMARY FLIGHT CONTROL SYSTEM




A3.9.2.1. Control system - - - -

A3.9.2.2. Trim/indication system - - - -


A3.9.3.1. Control system - - - -

A3.9.3.2. Trim/indication system - B - -


A3.10. SECONDARY FLIGHT CONTROL SYSTEM




*A3.10.2.1. Flaps 2b - - -

A3.10.2.2. Trim - - - -

*A3.10.2.3. Speed brakes 2b - - -

A3.10.2.4. Spoilers - - - -


*A3.10.3.1. Flaps 2b B - -

A3.10.3.2. Trim - - - -

*A3.10.3.3. Speed brakes 2b B - -

A3.10.3.4. Spoilers - - - -



A3.10.5.1. Emergency Flight Control Panel - - - -

A3.10.5.2. Speed brake Cam limit switch - - - -

A3.10.5.3. Flap position control unit - - - -

A3.10.5.4 Flight control relay box - - - -



40Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.10.6.2. Flight control relay box - - - -



A3.10.7.2. Speed brake Cam limit switch - - - -

A3.10.7.3. Flap position control unit - - - -

A3.10.7.4. Flight control relay box - - - -

A3.11. OVERHEAT/FIRE WARNING SYSTEM



*A3.11.1.1. Engine/pylon B B - -

A3.11.1.2. Smoke detection - - - -

A3.11.1.3. APU - - - -

A3.11.1.4. Bleed air overheat - - - -

A3.11.1.5. Wing overheat - - - -


*A3.11.2.1. Engine/pylon 2b - - -


A3.11.2.3. APU - - - -




*A3.11.3.1. Engine/pylon 2b B - -


A3.11.3.3. APU - - - -



A3.11.4. Inspect System Components * - - - -


A3.11.5.1. Sensing elements - - - -

A3.11.5.2. Smoke detectors - - - -

A3.11.5.3. Bleed air overheat control box - - - -

A3.11.5.4. Fire/overheat detectors - - - -

A3.11.5.5. Flasher control unit - - - -

A3.11.6. Adjust fire/overheat detectors - - - -



A3.11.7.2. Smoke detectors - - - -


41Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.11.7.3. Bleed air overheat control box - - - -

A3.11.7.4. Fire/overheat detectors - - - -

A3.11.7.5. Flasher control unit - - - -

A3.11.8. Bench check fire/overheat detectors - - - -

A3.12. FIRE EXTINGUISHING SYSTEM



*A3.12.1.1. Engine B B - -

A3.12.1.2. APU - - - -

A3.12.1.3. Wing - - - -


*A3.12.2.1. Engine 2b - -

A3.12.2.2. APU - - - -

A3.12.2.3. Wing - - - -

A3.12.2.4. Fire doors - - - -


*A3.12.3.1. Engine 2b B - -

A3.12.3.2. APU - - - -

A3.12.3.3. Wing - - - -

A3.12.3.4.. Fire doors - - - -



A3.12.5.1. Engine fire bottle - - - -

A3.12.5.2. APU fire bottle - - - -

*A3.12.5.3. Squib/cartridge * a - - -

A3.12.5.4. Wing fire bottle - - - -

A3.12.5.5 Resistor box - - - -

A3.12.5.6 T handle assembly - - - -

A3.12.5.7 Suppressor - - - -


A3.12.6.1. Resistor box - - - -

A3.12.6.2. T handle assembly - - - -


A3.12.7.1.. Engine fire bottle - - - -

A3.12.7.2. APU fire bottle - - - -

*A3.12.7.3. Squib/cartridge * a - - -

A3.12.7.4. Wing fire bottle - - - -

A3.12.7.5. Resistor box - - - -


42Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.12.7.7. Suppressor - - - -


A3.12.8.1. Resistor box - - - -


A3.13. TAKEOFF WARNING SYSTEM


A3.13.1. Operational fundamentals - B - -

A3.13.2. Operational check - - - -

A3.13.3. Troubleshoot - B - -

A3.13.4. Inspect system components - - - -

A3.13.5. Components location - - - -

A3.13.6. Adjust position switches - - - -

A3.14. MASTER CAUTION/WARNING SYSTEM







A3.14.5.1. Controller - - - -

A3.14.5.2. Flasher - - - -

A3.14.5.3. Annunciator panel - - - -

A3.14.5.4. Light assembly - - - -


A3.14.6.1. Controller - - - -



A3.14.7.1. Controller - - - -

A3.14.7.2. Flasher - - - -


A3.14.7.4. Light assembly - - - -


A3.14.8.1. Controller - - - -


A3.15. DOOR CONTROL AND WARNING SYSTEM


A3.15.1. Cargo doors


43Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A3.15.1.1. Operational fundamentals B B - -

*A3.15.1.2. Troubleshoot Cargo door control and warning system b B - -

A3.15.2 Weapons doors

A3.15.2.1 Operational fundamentals - - - -


A3.15.2.3 Troubleshoot - - - -

A3.15.2.4 Inspect System Components - - - -

A3.15.3 Adjust switches - - - -

A3.16. FUEL WARNING AND CONTROL SYSTEM




A3.16.2.1. Fuel warning and control system - - - -

A3.16.2.2. In-flight refueling (IFR)/Universal aerial refueling receptacle slip way installation (UARRSI) system

- - - -

A3.16.2.3. Ground refuel system - - - -


A3.16.3.1. Fuel warning and control system - B - -

A3.16.3.2. In-flight refueling (IFR)/Universal aerial refueling receptacle slipway installation (UARRSI) system

- - - -

A3.16.3.3. Ground refuel system - - - -



A3.16.5.1. Fuel management switches - - - -

A3.16.5.2. Single point refueling panel - - - -

A3.16.5.3. Fuel management panel - - - -

A3.16.5.4. Fuel & engine control relay box - - - -






A3.16.7.1. Fuel management switches - - - -







44Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A3.17. START AND IGNITION SYSTEM




A3.17.2.1. Jet engine - - - -

A3.17.2.2. APU - - - -

A3.17.2.3. Cartridge start - - - -


A3.17.3.1 Engine - B - -

A3.17.3.2 APU - B - -

A3.17.3.2. Cartridge start - - - -



A3.17.5.1. Centrifugal switch - - - -

A3.17.5.2. Breech cap - - - -

A3.17.5.3. Throttle quadrant - - - -


A3.17.6.1. Breech cap - - - -

A3.17.6.2. Throttle quadrant - - - -

A3.17.7. Components location - - - -

A3.18. NESA ANTI-ICING SYSTEM







A3.18.5.1. Temperature controller - - - -

A3.18.5.2. Windshield heat control box - - - -

A3.18.5.3. Thermal snap switch - - - -

A3.18.5.4. Transformers - - - -


A3.18.6.1. Temperature controller - - - -

A3.18.6.2. Windshield heat control box - - - -

A3.18.6.3. Thermal snap switch - - - -



45Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.19. BLEED AIR DISTRIBUTION SYSTEM



*A3.19.2. Operational check * 2b - -

*A3.19.3. Troubleshoot * 2b B - C



*A3.19.5.1. Ducts 2b - - -

A3.19.5.2. Insulation blankets - - - -

*A3.19.5.3. Check valve 2b - - -

*A3.19.5.4. Pressure regulator/shutoff valve 2b - - -

A3.19.5.5. Engine bleed air distribution valve - - - -

A3.19.5.6. Ejector valve - - - -

A3.19.5.7. By-pass valve - - - -

A3.19.5.8. Pre-cooler - - - -

A3.19.5.9. Pre-cooler temperature control valve - - - -

A3.19.5.10. Pre-cooler temperature control box - - - -


A3.19.5.12. Pressure sensor - - - -


*A3.19.6.1. Ducts 2b - - -

A3.19.6.2. Insulation blankets - - - -

*A3.19.6.3. Check valve 2b - - -

*A3.19.6.4. Pressure regulator/shutoff valve 2b - - -

A3.19.6.5. Engine bleed air distribution valve - - - -

A3.19.6.6. Ejector valve - - - -

A3.19.6.7. By-pass valve - - - -

A3.19.6.8. Pre-cooler - - - -

A3.19.6.9. Pre-cooler temperature control valve - - - -

A3.19.6.10. Pre-cooler temperature control box - - - -


A3.19.6.12. Pressure sensor - - - -

*A3.19.7. Perform leakage checks * 2b B - -

A3.19.8. Perform leak check with nitrogen cart - - - -

A3.19.9. Perform duct hydrostatic check - - - -

A3.20. AIR CONDITIONING SYSTEM




46Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.20.2. Subsystem fundamentals

*A3.20.2.1. Anti-G suit system B B - -

*A3.20.2.2. Defogging system B B - -

*A3.20.2.3. Rain removal system B B - -

A3.20.2.4. Primary heat exchanger - - - -

A3.20.2.5. Secondary heat exchanger - - - -

A3.20.2.6. Temperature control - - - -

A3.20.2.7. Low limit 35°control - - - -

A3.20.2.8. Avionics/equipment cooling - - - -

A3.20.2.9. Ram air - - - -


*A3.20.3.1. Air conditioning systems 2b - - -

A3.20.3.2. Anti-G suit system - - - -

A3.20.3.3. Defogging system - - - -

A3.20.3.4. Rain removal system - - - -






A3.20.3.10. Ram air - - - -

A3.20.3.11. Cabin heat control - - - -

A3.20.3.12. Interrogate environmental control system controller - - - -


*A3.20.4.1. Air conditioning systems * 2b B - C









A3.20.4.10. Ram air - - -

A3.20.4.11. Cabin heat control - - - -

A3.20.5. Inspect System Components - - 3c -


A3.20.6.1. Water separator - - - -


47Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

*A3.20.6.1. Water separator coalescer * 2b - - -

A3.20.6.2. Air conditioning pack - - - -

A3.20.6.3. Catalytic filter - - - -

A3.20.6.4. ECS over pressure switch - - - -

A3.20.6.5. ECS pressure regulator valve - - - -

A3.20.6.6. Temperature control box - - - -




A3.20.6.10. ECS control panel - - - -

A3.20.6.11 Cabin duct heater - - - -

A3.20.6.12. Ejector valve - - - -

A3.20.6.13. Ram air plenum - - - -

A3.20.6.14. Ram air valve - - - -

A3.20.6.15. Turbines - - - -

A3.20.6.16. Pack Anti-ice valve - - - -

A3.20.6.17. Temperature control valve - - - -

A3.20.6.18. Stores cooling valve - - - -

A3.20.6.19. CTCS controller - - - -

A3.20.6.20. ACS/MCS controller - - - -

A3.20.6.21. Anti-G suit valve/hose - - - -

A3.20.6.22. Defog valve - - - -

A3.20.6.23. Rain removal valve - - - -

A3.20.6.24. Air conditioning control switch - - - -

A3.20.6.25. Ducts - - - -

A3.20.6.26. Recirculation/electric/electronic cooling/vanaxial fan

- - - -




A3.20.7.3. Ducts - - - -


A3.20.7.5. Recirculation/electric/electronic cooling/vanaxialfan

- - - -



*A3.20.8.2. Water separator coalescer * 2b - - -

A3.20.8.3. Air conditioning pack - - - -


48Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.20.8.5. ECS over pressure switch - - - -

A3.20.8.6. ECS pressure regulator valve - - - -

A3.20.8.7. Temperature control box - - - -





A3.20.8.12. Cabin duct heater - - - -

A3.20.8.13. Ejector valve - - - -

A3.20.8.14. Ram air plenum - - - -

A3.20.8.15. Ram air valve - - - -

A3.20.8.16. Turbines - - - -

A3.20.8.17. Pack Anti-ice valve - - - -


A3.20.8.19. Stores cooling valve - - - -

A3.20.8.20. CTCS controller - - - -

A3.20.8.21. ACS/MCS controller - - - -

A3.20.8.22. Anti-G suit valve/hose - - - -

A3.20.8.23. Defog valve - - - -

A3.20.8.24. Rain removal valve - - - -

A3.20.8.25. Air conditioning control switch - - - -

A3.20.8.26. Ducts - - - -

A3.20.8.27. Recirculation/electric/electronic cooling/vanaxial fan

- - - -

*A3.20.9. Perform leakage checks * 1b B - -

A3.20.10 Bench check fans - - - -

A3.20.11 Perform duct hydrostatic test - - - -

.A3.20.12. Service turbine - - - -

A3.21. PRESSURIZATION SYSTEM



*A3.21.1.1. Aircraft pressurization system B B - -

*A3.21.1.2. Canopy seal system B B - -

A3.21.1.3. Fuel tank pressurization - - - -


*A3.21.2.1. Pressurization system *R 2b - - -

A3.21.2.2. Canopy seal system - - - -


49Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



*A3.21.3.1. Pressurization system * 2b B - C

A3.21.3.2. Canopy seal system - - - -




A3.21.5.1. Cabin pressure regulator/controller - - - -

A3.21.5.2. Cabin safety valve - - - -

A3.21.5.3. Outflow valve - - - -

A3.21.5.4. Pneumatic relay - - - -

A3.21.5.5. Canopy seal regulator - - - -

A3.21.5.6. Canopy seal - - - -

A3.21.5.7. Cabin pressure altimeter - - - -

A3.21.5.8. Central equipment bay regulator - - - -

A3.21.5.9. Forward equipment bay regulator - - - -

A3.21.5.10. Aft equipment bay regulator - - - -

A3.21.5.11. Low altitude switch - - - -

A3.21.5.12. High altitude switch - - - -

A3.21.5.13. Check valve - - - -

A3.21.5.14. Filters - - - -


A3.21.6.1. Cabin pressure regulator/controller - - - -

A3.21.6.2. Cabin safety valve - - - -




A3.21.6.6. Canopy seal - - - -

A3.21.6.7. Cabin pressure altimeter - - - -

A3.21.6.8. Central equipment bay regulator - - - -

A3.21.6.9. Forward equipment bay regulator - - - -

A3.21.6.10. Aft equipment bay regulator - - - -

A3.21.6.11. Low altitude switch - - - -

A3.21.6.12. High altitude switch - - - -

A3.21.6.13. Check valve - - - -

A3.21.6.14. Filters - - - -

A3.22. LIQUID COOLANT SYSTEM



50Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC





A3.22.4.1. Pump - - - -

A3.22.4.2. Heat exchanger - - - -

A3.22.4.3. Reservoir - - - -

A3.22.4.4. Filter - - - -

A3.22.4.5. Pressure regulator - - - -

A3.22.4.6. Test control panel - - - -

A3.22.4.7. Pressure/temperature Sensors - - - -


A3.22.5.1. Pump - - - -


A3.22.5.3. Reservoir - - - -

A3.22.5.4. Filter - - - -

A3.22.5.5. Pressure regulator - - - -

A3.22.5.6. Test control panel - - - -

A3.22.5.7. Pressure/temperature Sensors - - - -

A3.22.6. Service and recovery - - - -

A3.23. OXYGEN SYSTEMS

TR: AFOSH standards; TOs 15X1-1, 42B5-1-2, 42E1-1-1, applicable aircraft TOs, 8 series component TOs

A3.23.1. Liquid oxygen system


A3.23.1.2. Operational check

*A3.23.1.2.1. Crew 2b - - -

*A3.23.1.2.2. LOX indicating 2b - - -

A3.23.1.2.3. Oxygen regulator - - - -

A3.23.1.3. Troubleshoot

*A3.23.1.3.1. Crew 2b - - -

A3.23.1.3.2. PT LOX - - - -

A3.23.1.3.3. LOX indicating - - - -

A3.23.1.4. Inspect System Components * - B 3c -

A3.23.1.5. Purge system

*A3.23.1.5.1. Purge converter 2b B - -



51Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.23.1.6.1. Converter - - - -

A3.23.1.6.2. Build-up/fill and vent valve - - - -

A3.23.1.6.3. Check valves - - - -

A3.23.1.6.4. Indicator/totalizer - - - -

A3.23.1.6.5. Distribution tubing/hoses - - - -

A3.23.1.6.6. Heat exchanger - - - -

*A3.23.1.6.7. Oxygen regulator * 2b B - -

A3.23.1.7. Repair components

A3.23.1.7.1. Converter - - - -

A3.23.1.7.2. PT LOX converter - - - -


A3.23.1.8.1. Converter - - - -

A3.23.1.8.2. Build-up/fill and vent valve - - - -

A3.23.1.8.3. Check valves - - - -

A3.23.1.8.4. Indicator/totalizer - - - -


A3.23.1.8.6. Heat exchanger - - - -

*A3.23.1.8.7. Oxygen regulator * 2b B - -

*A3.23.1.9. Perform leak check * 2b B - -

*A3.23.1.10. Clean components & tools * B - - -

A3.23.1.11. Drain system

A3.23.1.11.1. Converter - - - -


A3.23.1.12. Service system

A3.23.1.12.1. Converter - - - -


A3.23.2. Gaseous oxygen system


A3.23.2.2. Operational check

A3.23.2.2.1. Back-up oxygen system - - - -

A3.23.2.2.2. Oxygen Regulator - - - -

A3.23.2.2.3. Selector Flow switch - - - -

*A3.23.2.2.4. High/Low pressure systems 2b - - -

A3.23.2.3. Troubleshoot

A3.23.2.3.1. Back-up oxygen system - - - -

A3.23.2.3.2. Oxygen Regulator - - - -

A3.23.2.3.3. Selector Flow switch - - - -

A3.23.2.3.4. High/Low pressure systems - B - -


52Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.23.2.4. Inspect System Components - B - -

A3.23.2.5. Purge system - B - -


A3.23.2.6.1. Bottle - - - -

A3.23.2.6.2. Service/drain valve - - - -

A3.23.2.6.3. Regulator - - - -

A3.23.2.6.4. Check valve - - - -

A3.23.2.6.5. Shutoff valve - - - -

A3.23.2.6.6. Low pressure switch - - - -


A3.23.2.6.8. Walk around bottle regulator - - - -

A3.23.2.6.9. Selector flow switch - - - -

A3.23.2.7. Repair bail out bottle - - - -


A3.23.2.8.1. Bottle - - - -

A3.23.2.8.2. Service/drain valve - - - -

A3.23.2.8.3. Regulator - - - -

A3.23.2.8.4. Check valve - - - -

A3.23.2.8.5. Shutoff valve - - - -

A3.23.2.8.6. Low pressure switch - - - -


A3.23.2.8.8. Walk around bottle regulator - - - -

A3.23.2.8.9. Selector flow switch - - - -

*A3.23.2.9. Perform leak check 2b - - -

A3.23.2.10. Clean components and tools * - - - -

A3.23.2.11. Purge system - - - -

A3.23.2.12. Drain system - - - -

A3.23.2.13. Service system - - - -

A3.23.3. Self-generating oxygen system




A3.23.3.4. Inspect System Components * - - - -

A3.23.3.5. Purge system - - - -


A3.23.3.6.1. Concentrator - - - -

A3.23.3.6.2. Partial filter - - - -

A3.23.3.6.3. Controller - - - -


53Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.23.3.7.1. Concentrator - - - -

A3.23.3.7.2. Partial filter - - - -

A3.23.3.7.3. Controller - - - -

A3.23.3.8. Perform leak check - - - -

A3.23.3.9. Clean components and tools * - - - -

A3.24. OBIGGS


A3.24.1. Operational fundamentals - - - -



A3.24.4. Inspect Concentrator - - - -

A3.24.5. Remove Concentrator - - - -

A3.24.6. Install Concentrator - - - -

A3.24.7. Perform leakage checks - - - -

A3.25. MISCELLANEOUS SYSTEMS

TR: Applicable aircraft/equipment TOs, 8 series component TOs


A3.25.1.1. Aircrew eye respiratory protection system (AERP) - - - -

A3.25.1.2. Thermal flash/protection power sources - - - -

A3.25.1.3. Windshield/wiper - - - -

A3.25.1.4. Windshield Wash System - - - -

*A3.25.1.5. Wing anti-icing system B B - -

A3.25.1.6. Cowl/Nacelle anti-ice - - - -

A3.25.1.7. Engine anti-ice - - - -

A3.25.1.8. De-icing - - - -


A3.25.2.1. Aircrew eye respiratory protection system (AERP) - - - -


A3.25.2.3.. Windshield/wiper - - - -

A3.25.2.4.. Windshield Wash System - - - -

A3.25.2.5.. Wing anti-icing system * - - - -

A3.25.2.6... Cowl/Nacelle anti-ice - - - -

A3.25.2.7.. Engine anti-ice - - - -

A3.25.2.8.. De-icing - - - -


A3.25.3.1.. Aircrew eye respiratory protection system (AERP) - - - -


54Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A3.25.3.3. Windshield/wiper - - - -

A3.25.3.4. Windshield Wash System - - - -

A3.25.3.5. Wing anti-icing system - - - -

A3.25.3.6. Cowl/Nacelle anti-ice - - - -

A3.25.3.7. Engine anti-ice - - - -

A3.25.3.8. De-icing - - - -


A3.25.5. Remove Components

A3.25.5.1. AERP control box - - - -

A3.25.5.2. Thermal Flash Conditioner - - - -

A3.25.5.3. Windshield wash control valve - - - -

A3.25.5.4. Windshield wash purge valve - - - -

A3.25.5.5. Windshield wash reservoir - - - -

A3.25.5.6. Miscellaneous relay box - - - -

A3.25.5.7. Cowl/Nacelle anti-ice

A3.25.5.7.1. Modulation/shutoff valve - - - -

A3.25.5.7.2. Temp Sensor/thermal switch - - - -

A3.25.5.7.3. Controller - - - -

A3.25.5.8. De-ice

A3.25.5.8.1. Boots - - - -

A3.25.5.8.2. Sequence Valve - - - -





A3.25.7.1. AERP control box - - - -

A3.25.7.2. Thermal Flash Conditioner - - - -

A3.25.7.3. Windshield wash control valve - - - -

A3.25.7.4. Windshield wash purge valve - - - -



A3.25.7.7. Cowl/Nacelle anti-ice

A3.25.7.7.1. Modulation/shutoff valve - - - -

A3.25.7.7.2. Temp Sensor/thermal switch - - - -

A3.25.7.7.3. Controller - - - -

A3.25.7.8 De-ice

A3.25.7.8.1. Boots - - - -


55Attachment 3

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A3.25.7.8.2. Sequence Valve - - - -

A3.25.7.8.3. Bench Check Miscellaneous Relay Box - - - -

CDC 2AX7X TRAINING REQUIREMENTSSTS 2A6X6, October 2002

56Attachment 4

2. Core Tasks

3. Certification For OJT 4. Proficiency Codes Used To IndicateTraining/Information Provided

(See Attachment 1)1. Tasks, Knowledge And Technical References A B C D E A

3 LevelB

5 LevelC

7 Level5 7 Tng

StartTng

CompleteTraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 4:


NOTE 2: This attachment is to be used in conjunction with other attachments in applicable CFETPs.

NOTE 3: Personnel must complete CDC requirements on all MDSs/attachments.

NOTE 4: This attachment is to be used as a correlation document for the 2AX7X 7-level Aerospace Maintenance Craftsman CDC’s.

NOTE 5: All items are SUBJECT KNOWLEDGE LEVELS only and require no certification on this STS.

A4.1. MANAGEMENT WITHIN THE MAINTENANCE COMPLEX

TR: AFI 21-101, AFI 21-118 and specific MAJCOM guidance

A4.1.1. Functions of the Maintenance Complex - - - B

A4.1.2. Operations / Logistics Group Commander Responsibilities

TR: AFI 38-101, AFPD 38-1

- - - B

A4.1.3. Accountability and Core Values - - - B

A4.1.4. Aircraft Maintenance Management Information Systems

- - - B

A4.1.5. Aircraft Monitoring - - - B

A4.1.6. Compliance and Standardization Requirements Listings

- - - A

A4.1.7. Maintenance Quality Performance Measures 8(QPM) Relationships

- - - B

A4.1.8. Health-of-the-Fleet Metrics - - - B

A4.1.9. Foreign Object Damage (FOD) Program Manager

TR: AFI 21-101

- - - A

A4.1.10. Joint Oil Analysis Program

TR: T.O. 33-1-37-1

- - - B

A4.1.11. Mobility - - - A

A4.1.12. Hazard Declarations for Mobility Packages

TR: AFMAN 24-204

- - - A

A4.1.13. Hazardous Material Handling Procedures

TR: AFJMAN 24-204, AFI 91-301, AFI 24-202, AFMAN 23-110

- - - B

A4.1.14. Production Supervisor, Flight Chief and Expediter Duties and Responsibilities

- - - B

A4.1.15. Special Certification Rosters - - - B

A4.1.16. Maintenance Incident Investigation and Prevention

TR: AFI 91-204

- - - B

A4.1.17. Aircraft Impoundment

TR: AFI 91-204

- - - A


57Attachment 4

2. Core Tasks



3 LevelB

5 LevelC

7 Level5 7 Tng

StartTng


TrainerInitials


(1)Course

(2)CDC

A4.1.18. Operational Risk Management (ORM)

TR: AFPD 90-9, AFI 90-901, AFPAM 90-902,

- - - B

A4.1.19. Restricted Maintenance Areas - - - A

A4.1.20. Force Protection

TR: AFDD 2-4.1

- - - A

A4.1.21. Classification Info, Access to Classified, COMSEC, OPSEC, COMPUSEC

TR: AFI 33-211, AFI 10-1101, AFI 33-202

- - - B

A4.1.22. Proper Handling of Classified Assets

TR: AFI 31-101

- - - A

A4.1.23. Aircraft Inspection Concepts

TR: TO 00-20-5

- - - B

A4.2. ENLISTED SPECIALTY TRAINING

TR: AFI 36-2201 and MAJCOM directives

A4.2.1. Training Management and

Records

- - - B

A4.2.2. Automated Training Records - - - B

A4.2.3. Career Field Education and Training Plan (CFETP) - - - B

A4.2.4. Specialty Training Standard (STS) - - - B

A4.2.5. Occupational Survey Report (OSR) - - - B

A4.2.6. Utilization and Training Workshop (U&TW) - - - B

A4.2.7. Training Forecast / Request - - - A

A4.2.8. Training Waiver Process - - - B

A4.2.9. Field Evaluation Questionnaire (FEQ) and Graduate Assessment Survey

- - - A

A4.3. ACCOUNTABILITY FOR RECORDS, REPORTS, AND FORMS

TR: AFI 21-109, TO 00-35D-54, TO 00-20 Seriesand applicable MAJCOM guidance

A4.3.1. Historical Records - - - B

A4.3.2. Minimum Essential Configuration Management (MESL)

- - - B

A4.3.3. Automated Maintenance Systems - - - A

A4.3.4. Reliability Availability, Maintainability, Logistics Engineering Support System for Electronic Attack Pods and Integrated Systems (RAMPOD), Core Automated Maintenance System for Airlift (GO 81)

- - - A

A4.3.5. Core Automated Maintenance System (CAMS)

TR: AFM 66-279 Vol. I-XXVII, T.O. 00-20-2

- - - B

A4.3.6. Job Data Documentation (JDD) - - - B

A4.3.7. Air Force Technical Order (AFTO) Forms 781 and 244 / 245

- - - B


58Attachment 4

2. Core Tasks



3 LevelB

5 LevelC

7 Level5 7 Tng

StartTng


TrainerInitials


(1)Course

(2)CDC

A4.3.8. Configuration Management - - - B

A4.3.9. Aircraft / Equipment Modifications - - - B

A4.3.10. Nuclear Surety

TR: AFI 91-101

- - - B

A4.3.11. Dull Sword Reporting

TR: AFI 91-204

- - - B

A4.4. SUPPLY MANAGEMENT

TR: DOD 7200-10, AFM 67-1, AFMAN 23-220, AFMAN 23-110 and applicable MAJCOM guidance

A4.4.1. Maintenance Supply Concept

TR: AFMAN 23-110

- - - B

A4.4.2. Supply Documents Management - - - B

A4.4.3. Precious Metal Program

TR: AFMAN 23-110

- - - A

A4.4.4. Bench Stock - - - A

A4.4.5. Air Force Technical Order (AFTO) 375 - - - A

A4.4.6. Quick Reference List (QRL) - - - A

A4.4.7. Standard Base Supply System (SBSS)

TR: AFMAN 23-110

- - - B

A4.4.8. Integrated Logistic System-Supply (ILS-S) and Global Combat Support System (GCSS)

TR: AFMAN 23-110

- - - A

A4.4.9. Priority Systems - - - B

A4.4.10. Repair Cycle Assets - - - B

A4.4.11. Report of Survey, Statement of Charges - - - B

A4.4.12. Equipment Account Management - - - B

A4.4.13. Custodian Authorization/Custody Receipt Listing (CA/CRL)

- - - A

A4.4.14. Precision Measurement Equipment Laboratory (PMEL)

- - - A

A4.4.15. Computer System Management

TR: AFI 33-112

- - - A

A4.4.16. Special Purpose Recoverable Authorized Maintenance(SPRAM)

TR: AFMAN 23-110

- - - A

A4.4.17. Air Force Management System (AFEMS) - - - A

A4.4.18. Status of Resources and Training (SORTS) - - - A

A4.4.19. Land Mobile Radios, Pagers, Cell Phones

TR: AFI 33-106

- - - A


59Attachment 4

2. Core Tasks



3 LevelB

5 LevelC

7 Level5 7 Tng

StartTng


TrainerInitials


(1)Course

(2)CDC

A4.4.20. Shelf Life Program

TR: AFMAN 23-110

- - - A

A4.4.21. Hazardous Materials (HAZMAT)

TR: Applicable AFOSH STD’s, AFI’s and MAJCOM guidance

- - - B

A4.4.22. Qualified Products Listing - - - B

A4.5. LOGISTICS AND RESOURCE MANAGEMENT

AFPD 21-1

A4.5.1. Logistics Management - - - B

A4.5.2. Agile Logistics - - - A

A4.5.3. Two-Level Maintenance (2LM) - - - A

A4.5.4. Execution and Prioritization of Repair System (EXPRESS)

- - - A

A4.5.5. Readiness Based Leveling (RBL)

TR: AFMAN 23-110

- - - A

A4.5.6. Resource Management - - - B

A4.5.7. Air Force Government-Wide Purchase Card Program and Air Force Form 9

TR: AFI 67-117

- - - A

A4.5.8. Air Force Enhancement Program (AFREP)

TR: AFI 21-123

- - - A

A4.5.9. Financial Plan (FIN Plan) - - - A

A4.5.10. Appropriation (APPN) 3400 and 3080 Budgeting - - - A

A4.5.11. Budget Line 3010 - - - A

A4.5.12. Air Force Material Command (AFMC) Responsibilities

- - - A

A4.5.13. Developmental Test and Evaluation (DT&E) Operational Test and Evaluation (OT&E)

- - - A

A4.5.14. Defense Logistics Agency - - - A

A4.5.15. Special Experience Identifier (SEI)

TR: AFMAN 36-2108

- - - B

A4.5.16. Unit Manpower Document (UMD) and Unit Management Personnel Roster (UMPR)

- - - A

A4.5.17. Manning Standards, and Logistics Composite Model (LCOM)

TR: AFI 38-201, AFMAN 38-208

- - - A

A4.5.18. Technical Order Management - - - B

A4.5.19. Technical Order Distribution Office (TODO), Technical Order Distribution Account (TODA), Technical Order Distribution Control Activity (TODCA), Technical Order Review Board (TORB)

TR: TO 00-5-1, TO 00-5-2

- - - A


60Attachment 4

2. Core Tasks



3 LevelB

5 LevelC

7 Level5 7 Tng

StartTng


TrainerInitials


(1)Course

(2)CDC

A4.5.20. Air Force Technical Order Forms 22, 27, 110, 158 - - - A

A4.5.21. Automated Technical Order Management System (ATOMS)

TR: TO 00-5-2

- - - A

A4.5.22. Time Compliance Technical Orders (TCTO)

TR: TO 00-5-15

- - - A

A4.5.23. Centralized Technical Order Management Organization (CTOM)

TR: TO 00-5-1

- - - A

A4.5.24. Joint Computer –aided Acquisition and Logistic Support (JCALS)

- - - A

A4.5.25. Electronic Technical Orders - - - A

A4.5.26. Deficiency Reporting (Hardware and Software)Product Quality Deficiency Reporting System (PQDR)

TR: TO 00-35D-54

- - - B

A4.5.27. Reporting of Deficiency (ROD) - - - B

A4.5.28. Bad Actor Program

TR: TO 00-20-1, TO 00-35D-54

- - - A

A4.5.29. Technical Improvement Product Working Group (TIPWG), System Training Plan (STP), Program Management Review (PMR)

- - - A

A4.5.30. Corrosion Prevention Advisory Board (CPAB)

TR: AFI 21-105

- - - A

A4.6. COMPUTER APPLICATION

A4.6.1. Using Applications - - - B

A4.6.2. Form Flow - - - B

A4.6.3. Air Force Electronic Publishing Library (AFEPL) - - - B

A4.6.4. World Wide Web (www), Internet - - - B

A4.6.5. Local Area Networks (LAN) - - - B

B-2 TRAINING REQUIREMENTSSTS 2A6X6, October 2002

61Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 5

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 6 will be performed by personnel assigned to maintain B-2 aircraft.



NOTE 4: Address comments and recommended changes through Unit Training Managers to the MAJCOM Maintenance Training Manager @ HQ AMC/LGMMT, 402 SUnit 2A2, Scott AFB, IL 62225-5308; or call DSN 576-4787. MAJCOM Training and Functional Managers forward inputs to the AETC Training Manager, DSN 736-27

A5.1. AIRCRAFT FAMILIARIZATION

TR: 1B-2A-2-00GV-00-1, 1B-2A-2-01JG SERIES, 1B-2A-2-05GS-00-1, 1B-2A-2-05JG SERIES

A5.1.1. Engine Air Intake and Exhaust - - - -

A5.1.2. High Intensity Sound - - - -

A5.1.3. Turbine Plane of Rotation - - - -

A5.1.4. Antenna Radiation - - - -

A5.1.5. Ground Handling of Aircraft - - - -

A5.1.6. Hot Brakes - - - -

A5.1.7. Hardness Critical Procedures * - - - -

A5.1.8. Observable Critical Procedures - - - -

A5.1.9. Operate Crew Entry Door - - - -

A5.1.10. Operate Aft Equipment Bay Door - - - -

A5.1.11. Operate Weapons Bay Doors - - - -

A5.1.12. Open / Close Engine AMAD Bay Doors - - - -

A5.1.13. Open / Close Hyd / ECS Bay Doors - - - -

A5.1.14. Apply / Remove External Electrical Power * - - - -

A5.1.15. Apply / Remove Cooling Air * - - - -

A5.1.16. Apply / Remove External Bleed Air * - - - -

A5.2.17. Ensure Aircraft Safe for Maintenance * - - - -

A5.2. ENVIRONMENTAL CONTROL SYSTEM

TR: 1B-2A-2-21GS-00-1, 1B-2A-2-21JG SERIES, and 1B-2A-2-40JG SEIRES


A5.2.2. Inspect - - - -


A5.2.4. Component Location - - - -

A5.2.5. Perform ECS Operational Check * - - - -

A5.2.6. Perform ECS Leak Checks - - - -

A5.2.7. Perform ECS Power Up / Power Down * - - - -

A5.2.8. EGW Tank - - - -

A5.2.9. Display Cooling Fan Operational Check - - - -


62Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.2.10. Crew Compartment Pressure Test and Leak Check * - - - -

A5.2.11. ECS Ground Readiness Test

A5.2.12. ECS Special Maintenance Requirements

TR: 1B-2A-2-21GS-00-1

A5.2.12.1. ECS Valve Thawing - - - -

A5.2.12.2. AFT Avionics Cooling Fan Power ContactorMaintenance

- - - -

A5.2.12.3. Purge EGW Wetted Parts - - - -

A5.2.12.4. Outflow Valve Switch Adjustment - - - -

A5.2.13. Remove ECS Control Components

TR: 1B-2A-2-21JG-10-1

A5.2.13.1. System Controller - - - -

A5.2.13.2. ECS Control Panel - - - -

A5.2.14. Install ECS Control Components

TR: 1B-2A-2-21JG-10-1

A5.2.14.1. System Controller - - - -


A5.2.15. Remove ECS Recirculated Air Sub-System Components

TR: 1B-2A-2-21JG-20-1, -2

A5.2.15.1. Ground Air Inlets - - - -

A5.2.15.2. Ground Air Outlets - - - -

A5.2.15.3. Check Valves - - - -

A5.2.15.4. Avionics Cooling Fan - - - -

A5.2.15.5. Avionics Cooling Fan Assembly Filter - - - -

A5.2.15.6. Avionics Emergency Cooling Valve - - - -

A5.2.15.7. Avionics Pressure Rise Sensor - - - -

A5.2.15.8. Avionics Low Pressure Sensor - - - -

A5.2.15.9. Avionics Air Over temperature Sensor - - - -

A5.2.16. Install ECS Recirculated Air Sub-System Components

TR: 1B-2A-2-21JG-20-1, -2

A5.2.16.1. Ground Air Inlets - - - -

A5.2.16.2. Ground Air Outlets - - - -

A5.2.16.3. Check Valves - - - -

A5.2.16.4. Avionics Cooling Fan - - - -

A5.2.16.5. Avionics Cooling Fan Assembly Filter - - - -

A5.2.16.6. Avionics Emergency Cooling Valve - - - -

A5.2.16.7. Avionics Pressure Rise Sensor - - - -


63Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.2.16.8. Avionics Low Pressure Sensor - - - -

A5.2.16.9. Avionics Air Over temperature Sensor - - - -

A5.2.17. Remove ECS Pressurization Sub-System Components

TR: 1B-2A-2-21JG-30-1

A5.2.17.1. Crew Compartment Outflow Valves - - - -

A5.2.17.2. Crew Compartment Safety Valve - - - -

A5.2.17.3. Outflow Valve Control - - - -

A5.2.18. Install ECS Pressurization Components

TR: 1B-2A-2-21JG-30-1

A5.2.18.1. Crew Compartment Outflow Valves - - - -

A5.2.18.2. Crew Compartment Safety Valve - - - -

A5.2.18.3. Outflow Valve Control - - - -

A5.2.19. Remove ECS Warm Air Sub-System Components

TR: 1B-2A-2-21JG-40-1

A5.2.19.1. Check Valves - - - -

A5.2.19.2. Temp Control Valve - - - -

A5.2.19.3. Crossover Valve - - - -

A5.2.19.4. Precooler Assembly - - - -

A5.2.19.5. Temp Sensor - - - -

A5.2.19.6. Defog Diverter Valve - - - -

A5.2.19.7. Defog Heat Exchanger - - - -

A5.2.19.8. Defog Temp Control Valve - - - -

A5.2.20. Install ECS Warm Air Sub-System Components

TR: 1B-2A-2-21JG-40-1

A5.2.20.1. Check Valves - - - -

A5.2.20.2. Temp Control Valve - - - -

A5.2.20.3. Crossover Valve - - - -

A5.2.20.4. Precooler Assembly - - - -

A5.2.20.5. Temp Sensor - - - -

A5.2.20.6. Defog Diverter Valve - - - -

A5.2.20.7. Defog Heat Exchanger - - - -

A5.2.20.8. Defog Temp Control Valve - - - -

A5.2.21. Remove ECS Cooling Sub-System Components

TR: 1B-2A-2-21JG-50-1, -2

A5.2.21.1. Weapons Air Flow Control Valve - - - -

A5.2.21.2. Check Valves - - - -

A5.2.21.3. Conditioned Air Intercooler Assembly - - - -


64Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.2.21.4. Conditioned Air Cycle Pack - - - -

A5.2.21.5. Conditioned Air Cycle Machine - - - -

A5.2.21.6. Conditioned Air Water Extractor - - - -

A5.2.21.7. Conditioned Air Temp Control Valve - - - -

A5.2.21.8. Conditioned Air Condenser Relief Valve - - - -

A5.2.21.9. Conditioned Air Filter - - - -

A5.2.21.10. Conditioned Air Flow Control Valve - - - -

A5.2.21.11. Conditioned Air Flow Distribution Valve - - - -

A5.2.21.12. Conditioned Air Flow Sensor - - - -

A5.2.21.13. Foot Warmer Diffuser - - - -

A5.2.21.14. Equipment Air Cycle Pack - - - -

A5.2.21.15. Equipment Air Flow Control Valve - - - -

A5.2.21.16. Equipment Air Cycle Machine - - - -

A5.2.21.17. Equipment Air Bypass Valve - - - -

A5.2.21.18. Equipment Air Sink Heat Exchanger - - - -

A5.2.22. Install ECS Cooling Sub-System Components

TR: 1B-2A-2-22JG-50-1, -2

A5.2.22.1. Weapons Air Flow Control Valve - - - -

A5.2.22.2. Check Valves - - - -

A5.2.22.3. Conditioned Air Intercooler Assembly - - - -

A5.2.22.4 Conditioned Air Cycle Pack - - - -

A5.2.22.5. Conditioned Air Cycle Machine - - - -

A5.2.22.6. Conditioned Air Water Extractor - - - -

A5.2.22.7. Conditioned Air Temp Control Valve - - - -

A5.2.22.8. Conditioned Air Condenser Relief Valve - - - -


A5.2.22.10. Conditioned Air Flow Control Valve - - - -

A5.2.22.11. Conditioned Air Flow Distribution Valve - - - -

A5.2.22.12. Conditioned Air Flow Sensor - - - -

A5.2.22.13. Foot Warmer Diffuser - - - -

A5.2.22.14. Equipment Air Cycle Pack - - - -

A5.2.22.15. Equipment Air Flow Control Valve - - - -

A5.2.22.16. Equipment Air Cycle Machine - - - -

A5.2.22.17. Equipment Air Bypass Valve - - - -

A5.2.22.18. Equipment Air Sink Heat Exchanger - - - -

A5.2.23. ECS Liquid Cooling Checks

TR:1B-2A-2-21JG-80-1, -2, -3, -4

A5.2.23.1. LCS Fluid Replacement and Leak Check - - - -


65Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.2.23.2. LCS Fluid Sampling - - - -

A5.2.23.3. LCS Fluid Air Entrapment Check - - - -

A5.2.23.4. EGW Fluid Replacement and Leak Check - - - -

A5.2.23.5. EGW Fluid Sampling - - - -

A5.2.23.6. Sink Heat Exchanger and Air Cycle Pack EGW Fluid Replacement and Leak Check

- - - -

A5.2.23.7. EWG Fluid Air Entrapment Check - - - -

A5.2.23.8. DMS Fluid Replacement and Leak Check - - - -

A5.2.23.9. DMS Fluid Sampling - - - -

A5.2.23.10. DMS Fluid Air Entrapment Check - - - -

A5.2.24. Remove ECS Liquid Cooling Sub-System Components

TR:1B-2A-2-21JG-80-1, -2, -3, -4

A5.2.24.1. LCS Pump Package - - - -

A5.2.24.2. LCS Heat Exchanger - - - -

A5.2.24.3. LCS Coolant Pressure Relief Valve - - - -

A5.2.24.4. LCS Overboard Pressure Relief Valve - - - -

A5.2.24.5. LCS Coolant Overflow Container - - - -

A5.2.24.6. EGW Pump Package - - - -

A5.2.24.7. FWD EGW Heat Exchanger - - - -

A5.2.24.8. CTB EGW Heat Exchanger - - - -

A5.2.24.9. Aft EGW Heat Exchanger - - - -

A5.2.24.10. DMS Pump Package - - - -

A5.2.24.11. DMS Heat Exchange - - - -

A5.2.25. Install ECS Liquid Cooling Sub-System Components

TR:1B-2A-2-21JG-80-1, -2, -3, -4

A5.2.25.1. LCS Pump Package - - - -

A5.2.25.2. LCS Heat Exchanger - - - -

A5.2.25.3. LCS Coolant Pressure Relief Valve - - - -

A5.2.25.4. LCS Overboard Pressure Relief Valve - - - -

A5.2.25.5. LCS Coolant Overflow Container - - - -

A5.2.25.6. EGW Pump Package - - - -

A5.2.25.7. FWD EGW Heat Exchanger - - - -

A5.2.25.8. CTB EGW Heat Exchanger - - - -

A5.2.25.9. Aft EGW Heat Exchanger - - - -

A5.2.25.10. DMS Pump Package - - - -

A5.2.25.11. DMS Heat Exchange - - - -

A5.2.26. Repair / Overhaul / Bench Check Components

TR:8C, 8D, and 15A SERIES


66Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A5.2.26.2. Air Conditioning Air Cycle Pack - - - -

A5.2.26.3. Liquid Media Cooling Switch Panels - - - -


A5.2.26.5. Desiccant Filter - - - -

A5.2.26.6. Conditioned Air Exhaust Port - - - -

A5.2.26.7. Emergency Cooling Air Valve - - - -

A5.2.26.8. Outflow Valve - - - -

A5.3. ELECTRICAL POWER SYSTEM

TR: 1B-2A-2-24GS-00-1, 1B-2A-2-24JG SERIES


A5.3.2. AC Operational Check - - - -

A5.3.3. DC Operational Check Inspect - - - -

A5.3.4. External Power Operational Check - - - -

A5.3.5. Chip Detector Checkout - - - -

A5.3.7. Inspect - - - -



A5.3.10. Electrical System Special MaintenanceRequirements

TR:1B-2A-2-24GS-00-1

A5.3.10.1. Circuit Breaker Panel Maintenance * - - - -

A5.3.10.2. AC CB Panel Differential Protection Current Transformer Assembly (DPCTA) Maintenance

- - - -

A5.3.10.3. Diode Panel Maintenance - - - -

A5.3.10.4. Power Contactor Maintenance - - - -

A5.3.10.5. Bus Diode Maintenance - - - -

A5.3.10.6. MUX Bus Coupler Maintenance - - - -

A5.3.10.7. Converter Regulator (CR) Support Assembly Maintenance

- - - -

A5.3.11. Remove AC System Components

TR:1B-2A-2-24JG-20-1

A5.3.11.1. IDG - - - -

A5.3.11.2. Generator Control Unit - - - -

A5.3.11.3. Line Contactor - - - -

A5.3.11.4. Bus Contactor - - - -

A5.3.11.5. Current Control Transformer Assembly (CCTA) - - - -

A5.3.11.6. Differential Protection Current Transformer Assembly (DPCTA)

- - - -


67Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.3.11.7. IDG Chip Detector - - - -

A5.3.11.8. Bus Control Unit - - - -

A5.3.12. Install AC System Components

TR:1B-2A-2-24JG-20-1

A5.3.12.1. IDG - - - -

A5.3.12.2. Generator Control Unit - - - -

A5.3.12.3. Line Contactor - - - -

A5.3.12.4. Bus Contactor - - - -

A5.3.12.5. Current Control Transformer Assembly (CCTA) - - - -

A5.3.12.6. Differential Protection Current TransformerAssembly (DPCTA)

- - - -

A5.3.12.7. IDG Chip Detector - - - -

A5.3.12.8. Bus Control Unit - - - -

A5.3.13. Remove DC System Components

TR:1B-2A-2-24JG-30-1

A5.3.13.1. Transformer Rectifier - - - -

A5.3.13.2. Battery - - - -

A5.3.13.3. Battery Charger - - - -

A5.3.13.4. Battery Circuit Breaker - - - -

A5.3.13.5. DC Bus Fuse - - - -

A5.3.13.6. APU Generator Control Unit - - - -

A5.3.13.7. APU Permanent Magnet Generator - - - -

A5.3.13.8. Converter Regulator - - - -

A5.3.13.9. AMAD Permanent Magnet Generator - - - -

A5.3.14. Install DC System Components

TR:1B-2A-2-24JG-30-1


A5.3.14.2. Battery - - - -


A5.3.14.4. Battery Circuit Breaker - - - -

A5.3.14.5. DC Bus Fuse - - - -

A5.3.14.6. APU Generator Control Unit - - - -

A5.3.14.7. APU Permanent Magnet Generator - - - -

A5.3.14.8. Converter Regulator - - - -

A5.3.14.9. AMAD Permanent Magnet Generator - - - -

A5.3.15. Remove External Power System Components

TR:1B-2A-2-24JG-40-1

A5.3.15.1. External Power DPCTA - - - -


68Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.3.15.2. External Power Contactor - - - -

A5.3.15.3. External Power Receptacle - - - -

A5.3.16. Install External Power System Components

TR:1B-2A-2-24JG-40-1

A5.3.16.1. External Power DPCTA - - - -



A5.3.17. Remove Electrical Load Distribution SystemComponents

TR:1B-2A-2-24JG-50-1

A5.3.17.1. DC Bus Tie Relay - - - -

A5.3.17.2. Electrical Power Control Panel - - - -

A5.3.17.3. Ground Power Control Panel - - - -

A5.3.17.4. Air Undercool Sensor - - - -

A5.3.17.5. Undercool Warning Bell - - - -

A5.3.17.6. Power Control Unit - - - -

A5.3.17.7. Processor Control Panel - - - -

A5.3.18. Install Electrical Load Distribution System Components

TR:1B-2A-2-24JG-50-1

A5.3.18.1. DC Bus Tie Relay - - - -



A5.3.18.4. Air Undercool Sensor - - - -

A5.3.18.5. Undercool Warning Bell - - - -

A5.3.18.6. Power Control Unit - - - -

A5.3.18.7. Processor Control Panel - - - -


TR:8C, and 8D SERIES




A5.3.19.4. Diode Panel - - - -

A5.3.19.5. Battery - - - -

A5.4. Repair / Overhaul / Bench Check Equipment/Furnishings System Components

TR: 8D, and 13A SERIES

A5.4.1. Crew Entry Hatch Control Panel - - - -

A5.4.2. Sustenance Container - - - -


69Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.5. FIRE PROTECTION SYSTEM

TR:1B-2A-2-26GS-00-1, 1B-2A-2-26JG SERIES

A5.5.1. Operational Fundamental - - - -

A5.5.2. Fire Protection Operational Checkout - - - -

A5.5.3. Extinguishing Operational Checkout * - - - -

A5.5.4. Inspect - - - -



A5.5.7. Fire Protection Special Maintenance Requirements

TR:1B-2A-2-26GS-00-1

A5.5.7.1. Fire and Overheat Connector Removal / Installation - - - -

A5.5.8. Remove Fire Protection System Components

TR:1B-2A-2-26JG-10-1

A5.5.8.1. Fire Master Switch - - - -

A5.5.8.2. Fire Warning Leak Detection Terminal Protection Device

- - - -

A5.5.8.3. Leak Detector Controller - - - -

A5.5.8.4. Fire and Aft Tailpipe O/H Sensor - - - -

A5.5.8.5. Leak Detector - - - -

A5.5.9. Install Fire Protection System Components

TR:1B-2A-2-26JG-10-1

A5.5.9.1. Fire Master Switch - - - -

A5.5.9.2. Fire Warning Leak Detection Terminal Protection Device

- - - -

A5.5.9.3. Leak Detector Controller - - - -

A5.5.9.4. Fire and Aft Tailpipe O/H Sensor - - - -

A5.5.9.5. Leak Detector - - - -

A5.5.10. Remove Fire Extinguishing System Components

TR:1B-2A-2-26JG-20-1, -2, -3

A5.5.10.1. Fire Extinguishing Bottle - - - -

A5.5.10.2. Engine Fire Extinguishing Head and BottleDischargeCartridge

- - - -

A5.5.10.3. Agent Discharge Switch - - - -

A5.5.10.4. Ground Alert Horn - - - -

A5.5.10.5. ENG/APU Fire Switch - - - -

A5.5.10.6. Initiator - - - -

A5.5.10.7. Fire Extinguishing Relay Panel - - - -

A5.5.10.8. APU Discharge Head and APU Discharge Cartridge - - - -

A5.5.10.9 Butterfly Valve - - - -


70Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.5.11. Install Fire Extinguishing System Components

TR:1B-2A-2-26JG-20-1, -2, -3

A5.5.11.1. Fire Extinguishing Bottle - - - -

A5.5.11.2. Engine Fire Extinguishing Head and Bottle Discharge Cartridge

- - - -

A5.5.11.3. Agent Discharge Switch - - - -

A5.5.11.4. Ground Alert Horn - - - -

A5.5.11.5. ENG/APU Fire Switch - - - -

A5.5.11.6. Initiator - - - -

A5.5.11.7. Fire Extinguishing Relay Panel - - - -

A5.5.11.8. APU Discharge Head and APU Discharge Cartridge - - - -

A5.5.11.9. Butterfly Valve - - - -


TR:8D, and 15A SERIES

A5.5.12.1. Fire Extinguisher Relay Panel - - - -

A5.5.12.2. Terminal Protection Device Housing Assembly - - - -

A5.6. Repair / Overhaul / Bench Check Flight Control System Components

TR:8D SERIES

A5.6.1. Flight Control Panel - - - -

A5.7. ICE AND RAIN PROTECTION SYSTEM



A5.7.2. Windshield AI/RR Operational Checkout - - - -

A5.7.3. Windshield AI/RR Leak Check - - - -

A5.7.4. Inspect - - - -



A5.7.7. Remove Ice and Rain Protection System Components

TR:1B-2A-2-30JG-40-1

A5.7.7.1. Air Pressure Regulator Shutoff Valve - - - -

A5.7.7.2. Air Overtemp Shutoff Valve - - - -

A5.7.7.3. Nozzle - - - -

A5.7.7.4. Air Temp Sensor - - - -

A5.7.8. Install Ice and Rain Protection System Components

TR:1B-2A-2-30JG-40-1

A5.7.8.1. Air Pressure Regulator Shutoff Valve - - - -

A5.7.8.2. Air Overtemp Shutoff Valve - - - -


71Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.7.8.3. Nozzle - - - -

A5.7.8.4. Air Temp Sensor - - - -

A5.8. CONTROL AND DISPLAY SYSTEM

TR: 1B-2A-2-31JG-10-1

A5.8.1. Remove/Install Disk Cartridge * - - - -


TR:1B-2A-2-32GS-00-1


A5.9.2. Inspect - - - -



A5.9.5. Remove Landing Gear System Components

TR: 1B-2A-2-32JG SERIES

A5.9.5.1. Landing Gear Control Assembly - - - -

A5.9.5.2. Proximity Sensors - - - -

A5.9.5.3. Proximity Sensor Logic Unit - - - -

A5.9.6. Install Landing Gear System Components

TR: 1B-2A-2-32JG SERIES

A5.9.6.1. Landing Gear Control Assembly - - - -

A5.9.6.2. Proximity Sensors - - - -

A5.9.6.3. Proximity Sensor Logic Unit - - - -

A5.9.7. Repair / Overhaul / Bench Check Landing Gear System Components

TR:8C, 8D, 9H, and 16W SERIES

A5.9.7.1. Landing Gear Control Panel - - - -

A5.9.7.2. Emergency Landing Gear Control Panel - - - -

A5.9.7.3. Door Lock Selector Valve - - - -

A5.9.7.4. Isolation Valve Selector - - - -

A5.9.7.5. Accumulator Service Crew Entry/Brake Panel - - - -


TR:1B-2-33GS-00-1, 1B-2A-2-33JG SERIES


A5.10.2. Crew Compartment Lighting Operational Checkout - - - -

A5.10.3. Service Lighting Operational Checkouts - - - -

A5.10.4. Exterior Lighting Operational Checkout - - - -

A5.10.5. Emergency Lighting Operational Checkout - - - -

A5.10.6. Inspect - - - -



72Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A5.10.9. Remove Crew Compartment Lighting Components

TR:1B-2A-2-33JG-10-1, -2

A5.10.9.1. Warning Caution Advisory Panel - - - -

A5.10.9.2. Master Warning/Master Caution Switch - - - -

A5.10.9.3. Floodlights - - - -

A5.10.9.4. Utility Lights - - - -

A5.10.9.5. Dimmers - - - -

A5.10.10. Install Crew Compartment Lighting Components

TR:1B-2A-2-33JG-10-1, -2

A5.10.10.1. Warning Caution Advisory Panel - - - -

A5.10.10.2. Master Warning/Master Caution Switch - - - -

A5.10.10.3. Floodlights - - - -

A5.10.10.4. Utility Lights - - - -

A5.10.10.5. Dimmers - - - -

A5.10.10.6. Lighting Control Panels - - - -

A5.10.10.7. Entry Light Switch - - - -

A5.10.10.8. Time Delay Relay Panel - - - -

A5.10.10.9. Standby Instrument Transfer Relay Panel - - - -

A5.10.11. Remove Service Lighting Components

TR: 1B-2A-2-33JG-30-1

A5.10.11.1. Weapons Bay Lights - - - -

A5.10.11.2. Main/Nose Wheel Well Lights - - - -

A5.10.11.3. Aft Equipment Bay Light - - - -

A5.10.11.4. Right Radar Bay Light - - - -

A5.10.12. Install Service Lighting Components

TR: 1B-2A-2-33JG-30-1

A5.10.12.1. Weapons Bay Lights - - - -

A5.10.12.2. Main/Nose Wheel Well Lights - - - -

A5.10.12.3. Aft Equipment Bay Light - - - -

A5.10.12.4. Right Radar Bay Light - - - -

A5.10.13. Remove Exterior Lighting Components

TR:1B-2A-2-33JG-40-1

A5.10.13.1. Landing-Taxi Light - - - -

A5.10.13.2. A/R Lead-In Floodlight - - - -

A5.10.13.3. Inlet Floodlight - - - -

A5.10.13.4. Nacelle Floodlight - - - -

A5.10.13.6. Wing Tip Light - - - -


73Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.10.13.7. Wing Tip Power Supply - - - -

A5.10.14. Install Exterior Lighting Components

TR:1B-2A-2-33JG-40-1

A5.10.14.1. Landing-Taxi Light - - - -

A5.10.14.2. A/R Lead-In Floodlight - - - -

A5.10.14.3. Inlet Floodlight - - - -

A5.10.14.4. Nacelle Floodlight - - - -

A5.10.14.5. Dimmer - - - -

A5.10.14.6. Wing Tip Light - - - -

A5.10.14.7. Wing Tip Power Supply - - - -

A5.10.15. Remove/ Install Emergency Lighting Components

TR:1B-2A-2-33JG-50-1

A5.10.15.1. Emergency Light - - - -


TR:8A SERIES

A5.10.16.1. Power Supply Wing Tip Lighting - - - -

A5.10.16.2. Light Assembly A/C Position and Strobe - - - -

A5.10.16.3. Pilots Lighting Control Panel - - - -

A5.10.16.4. Overhead Lighting Control Panel - - - -

A5.11. OXYGEN SYSTEM

TR:1B-2A-2-35GS-00-1, 1B-2A-2-35JG, and 1B-2A-2-40JG SERIES


A5.11.2. Primary Oxygen Operational Checkout * - - - -

A5.11.3. Back-up Oxygen System Operational Checkout - - - -

A5.11.4. Oxygen System Purge - - - -

A5.11.5. BOS Cylinder Assembly Depressurization - - - -

A5.11.6. Oxygen System Selective GRT - - - -

A5.11.7. Inspect - - - -



A5.11.10. Oxygen System Special Maintenance Requirements

TR:1B-2A-2-35GS-00-1

A5.11.10.1. EOS Cylinder Assembly Servicing (OFF AIRCRAFT) - - - -

A5.11.11. Remove Oxygen System Components

TR:1B-2A-2-35JG-10-1, -2

A5.11.11.1. Oxygen Concentrator - - - -

A5.11.11.2. Inlet Filter - - - -


74Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.11.11.3. Outlet Filter - - - -

A5.11.11.4. Electronic Control Unit - - - -

A5.11.11.5. Composition Monitor - - - -

A5.11.11.6. OGADS Heater Control Unit - - - -

A5.11.11.7. OGADS Sample Filter - - - -

A5.11.11.8. Oxygen Breathing Regulator - - - -

A5.11.11.9. Oxygen Control Panel - - - -

A5.11.11.10 BOS Cylinder Assembly - - - -

A5.11.11.11. BOS Release Valve - - - -

A5.11.11.12 .EOS Cylinder - - - -

A5.11.12. Install Oxygen System Components

TR:1B-2A-2-35JG-10-1, -2

A5.11.12.1. Oxygen Concentrator - - - -

A5.11.12.2. Inlet Filter - - - -

A5.11.12.3 Outlet Filter - - - -

A5.11.12.4. Electronic Control Unit - - - -

A5.11.12.5. Composition Monitor - - - -

A5.11.12.6. OGADS Heater Control Unit - - - -

A5.11.12.7. OGADS Sample Filter - - - -

A5.11.12.8. Oxygen Breathing Regulator - - - -

A5.11.12.9. Oxygen Control Panel - - - -

A5.11.12.10. BOS Cylinder Assembly - - - -

A5.11.12.11. BOS Release Valve - - - -

A5.11.12.12. EOS Cylinder - - - -


TR: 15X SERIES

A5.11.13.1. Oxygen System Control Panel - - - -

A5.12. PNEUMATIC SYSTEM



A5.12.2. Bleed Air Control Panel Checkout - - - -

A5.12.3. Inspect - - - -



A5.12.6. Pneumatic System Special Maintenance Requirements

TR:1B-2A-2-36GS-00-1

A5.12.6.1. 5TH AND 9TH Primary Pressure Regulator Switch Checkout

- - - -


75Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.12.7. Remove Pneumatic System Components

TR:1B-2A-2-36JG-10-1, 36JG-20-1

A5.12.7.1. 5TH Primary Pressure Regulator Valve - - - -

A5.12.7.2. Bleed Air Check Valve - - - -

A5.12.7.3. Isolation Valve - - - -

A5.12.7.4. Ejector Valve - - - -

A5.12.7.5. Bleed Air Control Panel - - - -

A5.12.7.6. 9th Primary Pressure Regulator - - - -

A5.12.8.7. Secondary Pressure Regulator - - - -

A5.12.8.8. Bleed Air Pressure Sensor - - - -


TR:8D, and 9P SERIES

A5.12.9.1. Bleed Air Control Panel - - - -

A5.12.9.2. Valves - - - -

A5.13. Electrical/Electronic and Multipurpose System Components

TR: 1B-2A-A-39GS-00-1, and 39JG SERIES


A5.13.2. Inspect - - - -



A5.13.5. Remove Electrical/Electronic Panels

TR:1B-2A-2-39JG-40-1, 40-2

A5.13.5.1. Relay Panels - - - -

A5.13.5.2. APU/Engine Start Control Panel - - - -

A5.13.5.3. Alert Switch Control Panel - - - -

A5.13.5.4. Brake/Landing Light Control Panel - - - -

A5.13.5.5. Diode Panel - - - -

A5.13.5.6. Relay Power Panel - - - -

A5.13.6. Install Electrical/Electronic Panels

TR:1B-2A-2-39JG-40-1, 40-2

A5.13.6.1. Relay Panels - - - -





A5.13.6.6. Diode Panel - - - -



76Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


TR:8A, 8D, and 8R SERIES

A5.13.7.1. Relay Panels - - - -




A5.13.7.5. Diode Panel - - - -


A5.14. Repair / Overhaul / Bench Check Auxiliary Power System Components

TR:8D, and 9P SERIES

A5.14.1. Check Valves - - - -

A5.14.2. APU Maintenance Panel - - - -

A5.14.3. Alert Arm Control Panel - - - -

A5.15. Repair / Overhaul / Bench Check Power Plant System Components

TR: 8D SERIES

A5.15.1. Engine Auxiliary Inlet Doors Control Panel - - - -

A5.16. Repair / Overhaul / Bench Check Engine AirSystem Components

TR: 15E SERIES

A5.16.1. Ice Detector - - - -

A5.17. Repair / Overhaul / Bench Check Engine ControlSystem Components

TR: 5E, and 8C SERIES

A5.17.1. Throttle Quadrant/Grips - - - -

A5.17.2. Alternate Throttle Panel - - - -

A5.18. Repair / Overhaul / Bench Check Accessory GearboxSystem Components

TR: 5L, and 8D SERIES

A5.18.1. AMAD Oil Readout Panel - - - -

A5.18.2. Accessory Drive Control Panel - - - -

A5.18.3. Chip Detector Power Module - - - -

A5.18.4. Fan/Duct Assembly - - - -

A5.19. Repair / Overhaul / Bench Check Crew Escape andSafety System Components

TR: 8D SERIES

A5.19.1. Seat Adjustment Control Panel Assembly - - - -

A5.20. Center Wing Skin/Panels

TR:1B-2A-2-53JG-30-2


77Attachment 5

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A5.20.1. Remove/Install Crew Station Liners - - - -

A5.21. Power supplies

TR:Applicable T. O.

A5.21.1. Operate DC power supply - - - -

A5.21.2. Operate AC power supply - - - -

C-5 TRAINING REQUIREMENTSSTS 2A6X6, October 2002

78Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 6

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 6 will be performed by personnel assigned to maintain C-5 aircraft.



NOTE 4: Address comments and recommended changes through Unit Training Managers to the MAJCOM Maintenance Training Manager @ HQ AMC/LGMMT,402 Scott Drive Unit 2A2, Scott AFB, IL 62225-5308; or call DSN 576-4787. MAJCOM Training and Functional Managers forward inputs to the AETC TrainingManager, DSN 736-2772.

A6.1 AC POWER SYSTEM TR:


A6.1.2. Operational check system

A6.1.2.1 Main AC generator system - - - -

A6.1.2.2 Emergency generator system - - - -

A6.1.2.3. APU - - - -

A6.1.2.4 60 Hertz system - - - -

A6.1.3. Troubleshoot system

A6.1.3.1. Main AC power generator - - - -

A6.1.3.2. Emergency generator system - - - -

A6.1.3.3. APU - - - -

A6.1.4. Inspect System components

A6.1.4.1. AC Power Generator * - - - -

A6.1.4.2. Emergency Generator * - - - -

A6.1.4.3. APU * - - - -

A6.1.4.4. 60 Hertz * - - - -


A6.1.5.1. CSD - - - -

A6.1.5.2. Generator - - - -

A6.1.5.3. Emergency Generator - - - -

A6.1.5.4. GCU - - - -

A6.1.5.5. Bus Protection Panels - - - -

A6.1.5.6. Load Controllers - - - -

A6.1.5.7. Bus Tie/Generator Line Contactors - - - -

A6.1.5.8. Power Contactors - - - -


A6.1.5.10. Power Transfer Relays - - - -


A6.1.6.1. CSD - - - -

A6.1.6.2. AC Generator - - - -


A6.1.6.4. GCU - - - -


79Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC







A6.1.7.1. CSD - - - -



A6.1.7.4. GCU - - - -







A6.1.8. Bench check

A6.1.8.1. CSD - - - -



A6.1.8.4. GCU - - - -






A6.2. DC POWER SYSTEM TR:


A6.2.2. Operational Check System - - - -

A6.2.3. Troubleshoot System * - - - -



A6.2.5.1. Battery - - - -


A6.2.5.3. Gauges - - - -


A6.2.5.5. Bus relays - - - -

A6.2.5.6. Panels - - - -


80Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A6.2.6.2. Bus relays - - - -

A6.2.6.3. Panels - - - -



A6.2.7.1. Battery - - - -


A6.2.7.3. Gauges - - - -


A6.2.7.5. Bus relays - - - -

A6.2.7.6. Panels - - - -

A6.2.8. Bench check



A6.2.8.3. Bus relays - - - -

A6.2.8.4. Panels - - - -

A6.3. EXTERNAL POWER SYSTEM TR:






A6.3.5.1. Line contactors - - - -

A6.3.5.2. Ext power receptacle - - - -



A6.3.6.1. Line contactors - - - -

A6.3.6.2. Ext power receptacle - - - -


A6.3.7. Bench Ck/Repair Line Contactors - - - -

A6.4. APU power system



A6.4.3. Service Auxiliary Power Unit (APU) with oil

TR: TO 1C-5A-2-1

- - - -

A6.4.4. Troubleshoot System - - - -



81Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.4.6. Remove APU GCU - - - -

A6.4.7. Install APU GCU - - - -

A6.4.8. Bench Ck/Repair APU GCU - - - -

A6.5. LIGHTING SYSTEM TR:


A6.5.2. Operational Check System

A6.5.2.1. Interior - - - -

A6.5.2.2. Exterior - - - -

A6.5.2.3. Emergency - - - -

A6.5.3. Troubleshoot system

A6.5.3.1. Interior - - - -

A6.5.3.2. Exterior - - - -

A6.5.3.3. Emergency - - - -


A6.5.4.1. Interior - - - -

A6.5.4.2. Exterior - - - -

A6.5.4.3. Emergency - - - -


A6.5.5.1. Strobe light - - - -

A6.5.5.2. Navigation/formation - - - -

A6.5.5.3. Anti-collision - - - -

A6.5.5.4. Retractable landing light - - - -

A6.5.5.5. Taxi light - - - -

A6.5.5.6. Map/chart holder - - - -

A6.5.5.7. Emergency exit light - - - -

A6.5.5.8. Controllers - - - -


A6.5.5.10. Leading edge light - - - -

A6.5.5.11. Advisory lights - - - -

A6.5.5.12. Flood lights - - - -

A6.5.5.13. Power supply - - - -

A6.5.5.14. Light cards - - - -

A6.5.5.15. Relays - - - -

A6.5.5.16. IFR/Slipway light - - - -

A6.5.6. Repair Components





82Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A6.5.6.5. Taxi light - - - -





A6.5.6.10. Power supply - - - -

A6.5.7. Install Components





A6.5.7.5. Taxi light - - - -



A6.5.7.8. Controllers - - - -




A6.5.7.12. Flood lights - - - -

A6.5.7.13. Power supply - - - -

A6.5.7.14. Light cards - - - -

A6.5.7.15. Relays - - - -

A6.5.7.16. IFR/Slipway light - - - -

A6.5.8. Bench check




A6.5.8.4. 125Retractable landing light - - - -

A6.5.8.5. Taxi light - - - -





A6.5.8.10. Power supply - - - -

A6.6. LANDING GEAR/KNEELING SYSTEM

TR:



83Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




A6.6.4.1. Control handle - - - -

A6.6.4.2. Sequence panel - - - -

A6.6.4.3. Sensors - - - -

A6.6.4.4. Switches - - - -

A6.6.4.5. Junction boxes - - - -

A6.6.4.6. Switch cards - - - -

A6.6.4.7. Relays - - - -

A6.6.4.8. Diodes - - - -



A6.6.5.2. Control panels - - - -



A6.6.6.2. Sequence panel - - - -

A6.6.6.3. Sensors - - - -

A6.6.6.4. Switches - - - -

A6.6.6.5. Junction boxes - - - -

A6.6.6.6. Switch cards - - - -

A6.6.6.7. Relays - - - -

A6.6.6.8. Diodes - - - -

A6.6.7. Bench check




TR:


A6.7.2. Operational Check System* * - - - -

A6.7.3.. Troubleshoot System * - - - -

A6.7.4. .Inspect System Components * - - - -


A6.7.5.1. Detector and deflation valve - - - -

A6.7.5.2. Anti-skid Control box - - - -

A6.7.5.3. Control panel - - - -




84Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A6.7.7. Install components - - - -

A6.7.7.1. Detector and deflation valve - - - -

A6.7.7.2. Anti-skid Control box - - - -


A6.7.8. Bench check



A6.8. NOSE GEAR STEERING/KNEELING SYSTEM

TR:





A6.8.4.1. Indicator - - - -

A6.8.4.2. Sensors/switches - - - -


A6.8.5.1. Indicator - - - -

A6.8.5.2. Sensors/switches - - - -


TR:


A6.9.2. Operational check System

A6.9.2.1. Primary flight control - - - -

A6.9.2.2. Trim and indication - - - -

A6.9.3. Troubleshoot System

A6.9.3.1. Primary flight control - - - -




TR:



A6.10.2.1. Secondary flight control - - - -



A6.10.3.1. Secondary flight control - - - -



85Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A6.10.5.1. Flap/slate transmitters - - - -

A6.10.5.2. Asymmetry/Proximity control box - - - -

A6.10.5.3. Diodes - - - -

A6.10.5.4. Relays - - - -

A6.10.5.5. Proximity sensors

TR: TO 1C-5A-2-9JG-3-1

- - - -


A6.10.6.1. Flap/slate transmitters - - - -

A6.10.6.2. Asymmetry/Proximity control box - - - -

A6.10.6.3. Diodes - - - -

A6.10.6.4. Relays - - - -

A6.10.6.5. Proximity sensors

TR: TO 1C-5A-2-9JG-3-1

- - - -

A6.10.7. Bench Ck/Repair Asymmetry/Proximity Control Box - - - -

A6.10.8. Null flaps and slat brake transmitter

TR: TO 1C-5A-2-9JG-3-1

- - - -


TR:






A6.11.5.1. Smoke detector - - - -

A6.11.5.2. Control box - - - -

A6.11.5.3. Flame detector - - - -

A6.11.5.4. Sensors/sensing elements - - - -



A6.11.6.2. Control box - - - -



A6.11.7.2. Control box - - - -

A6.11.7.3. Flame detector - - - -

A6.11.7.4. Sensors/sensing elements - - - -

A6.11.8. Bench check


86Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A6.11.8.2. Control box - - - -




A6.12.2.1. Engine fire ext. system - - - -

A6.12.2.2. APU fire ext. system - - - -

A6.12.3. Troubleshoot system - - - -

A6.12.4. Inspect system Components * - - - -


A6.12.5.1. Fire bottles - - - -

A6.12.5.2. Plumbing - - - -

A6.12.5.3. Squib - - - -

A6.12.5.4. Panels - - - -


A6.12.6.1. Fire bottles - - - -

A6.12.6.2. Plumbing - - - -

A6.12.6.3. Squib - - - -

A6.12.6.4. Panels - - - -

A6.12.7. Perform ignition ck of squibs - - - -

A6.12.8. Bench Ck/Repair Panels - - - -

A6.13. FIRE SUPPRESSION/FUEL INERTING AND PRESSURIZATION

TR:


A6.13.2. Operational check system - - - -




A6.13.5.1. CPU - - - -

A6.13.5.2. CTS loops - - - -

A6.13.5.3. Dewar assembly - - - -

A6.13.5.4. Plumbing - - - -

A6.13.5.5. Main FSS panel - - - -

A6.13.5.6. Cargo FSS panel - - - -

A6.13.5.7. Nose FSS panel - - - -

A6.13.5.8. FSS LN2 service panel - - - -

A6.13.5.9. FSS LN2 valves and regulators - - - -


87Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.13.5.10. Signal Conditioner - - - -


A6.13.6.1. CPU - - - -


A6.13.6.3. Main FSS panel - - - -


A6.13.6.5. Nose FSS panel - - - -





A6.13.7.1. CPU - - - -

A6.13.7.2. CTS loops - - - -


A6.13.7.4. Plumbing - - - -

A6.13.7.5. Main FSS panel - - - -


A6.13.7.7. Nose FSS panel - - - -





A6.13.8.1. CPU - - - -


A6.13.8.3. Main FSS panel - - - -


A6.13.8.5. Nose FSS panel - - - -




A6.13.9. Activate/deactivate FSS - - - -

A6.13.10. Purge Dewar - - - -


TR:



A6.14.3. Troubleshoot system * - - - -



88Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A6.14.5.1. Annunciator assembly - - - -

A6.14.5.2. Control box - - - -

A6.14.5.3. Light cards - - - -



A6.14.6.2. Control box - - - -



A6.14.7.2. Control box - - - -

A6.14.7.3. Light cards - - - -



A6.14.8.2 Control box - - - -


TR:






A6.15.5.1. Sensors - - - -

A6.15.5.2. Switches - - - -



A6.15.6.1. Sensors - - - -

A6.15.6.2. Switches - - - -


A6.15.7. Bench Ck/Repair control panels - - - -


TR:





A6.17. INFLIGHT REFUELING SYSTEM




89Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




TR:






TR:






A6.19.5.1. Windshield Heat control box - - - -



A6.19.6.1. Windshield Heat control box - - - -


A6.19.7. Bench Ck/Repair windshield heat control box - - - -


TR:


A6.20.2. Operational check System - - - -




A6.20.5.1. Valves - - - -

A6.20.5.2. Sensors - - - -

A6.20.5.3. Ducts - - - -

A6.20.5.4. Switches - - - -


A6.20.6.1. Valves - - - -

A6.20.6.2. Sensors - - - -

A6.20.6.3. Ducts - - - -

A6.20.6.4. Switches - - - -

A6.20.7. Perform leakage test using high pressure air source - - - -


90Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.20.8. Perform leakage test using APU's - - - -

A6.20.9. Repair Compensator Ducts - - - -

A6.21. BLEED AIR OVERHEAT SYSTEM


A6.21.2. Operational check System - - - -

A6.21.3. Troubleshoot system *R - - - -




A6.21.5.2. Locator relay - - - -

A6.21.5.3. Control box - - - -



A6.21.6.2. Locator relay - - - -

A6.21.6.3. Control box - - - -

A6.21.7. Bench Ck/Repair control box - - - -

A6.21.8. Calibrate locator relay * - - - -


TR:






A6.22.5.1. Valves - - - -

A6.22.5.2. Sensors - - - -

A6.22.5.3. Switches - - - -

A6.22.5.4. Temp cont. boxes - - - -

A6.22.5.5. Ducts - - - -

A6.22.5.6. Cooling Turbine - - - -



A6.22.5.9. Fan and sensor - - - -

A6.22.5.10. Van axial Fan assembly - - - -

A6.22.5.11. Mixing chamber - - - -

A6.22.5.12. Air Exit Valve Assembly - - - -


A6.22.6.1. Valves - - - -


91Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A6.22.6.4. Fan and sensor - - - -




A6.22.7.1. Valves - - - -

A6.22.7.2. Sensors - - - -

A6.22.7.3. Switches - - - -


A6.22.7.5. Ducts - - - -

A6.22.7.6. Cooling Turbine - - - -



A6.22.7.9. Fan and sensor - - - -


A6.22.7.11. Mixing chamber - - - -



A6.22.8.1. Valves - - - -



A6.22.8.4. Fan and sensor - - - -





TR:






A6.23.5.1. Thrust recovery actuator - - - -

A6.23.5.2. Auto press. Cont. box - - - -


A6.23.5.4. Indicators - - - -

A6.23.5.5. Switches - - - -


92Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.23.5.6. Panels - - - -

A6.23.5.7. Safety relief valve - - - -

A6.23.5.8. Potentiometer - - - -


A6.23.6.1. Panels - - - -

A6.23.6.2. Safety Valves - - - -


A6.23.7.1. Thrust recovery actuator - - - -

A6.23.7.2. Auto press. Cont. box - - - -


A6.23.7.4. Indicators - - - -

A6.23.7.5. Switches - - - -

A6.23.7.6. Panels - - - -

A6.23.7.7. Safety relief valve - - - -

A6.23.7.8. Potentiometer - - - -


A6.23.8.1. Panels - - - -

A6.23.8.2. Safety Valves - - - -

A6.23.9. Perform Built-In Test (BITE) of Automatic Pressurization System

- - - -

A6.23.10. Rig Outflow valve actuator * - - - -


TR: 15X-1-1



A6.24.2.1. Crew - - - -

A6.24.2.2. Troop and passenger - - - -

A6.24.2.3. Lox indicating - - - -




A6.24.5.1. Buildup/vent valve - - - -

A6.24.5.2. Drain/fill valve - - - -

A6.24.5.3. Press. Demand Regulators - - - -

A6.24.5.4. Cont. flow regulators - - - -

A6.24.5.5. Drop down masks - - - -


A6.24.5.7. Recharge hose - - - -


93Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.24.5.8. Converters - - - -

A6.24.5.9. Indicators - - - -

A6.24.5.10. Plumbing - - - -

A6.24.5.11. Walk around bottle - - - -

A6.24.5.12. Regulator Hose assembly - - - -



A6.24.6.2. Drain/fill valve - - - -

A6.24.6.3. Press. Demand Regulators - - - -

A6.24.6.4. Cont. flow regulators - - - -

A6.24.6.5. Drop down masks - - - -


A6.24.6.7. Recharge hose - - - -

A6.24.6.8. Converters - - - -

A6.24.6.9. Indicators - - - -

A6.24.6.10. Plumbing - - - -

A6.24.6.11. Walk around bottle - - - -

A6.24.6.12. Regulator Hose assembly - - - -

A6.24.7. Perform leakage check - - - -

A6.24.8. Purge system - - - -

A6.24.9. Service/drain system - - - -

A6.24.10. Bench Ck/Repair Walk around Bottle - - - -

A6.24.11. Connect/Disconnect Cryogenic vent plugs/tubes, and equipment to vent ports TR: TO 1C-5A-2-2 and applicable equipment Technical Orders

- - - -

A6.25. Windshield wiper system

A6.25.1 Operational fundamentals - - - -



A6.25.4. Inspect system Components - - - -

A6.25.5. Repair windshield wiper motor - - - -

A6.25.6. Bench Check windshield motor - - - -

A6.26. GALLEY/BUFFET






A6.26.5.1. Oven - - - -


94Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.26.5.2. Refrigerator - - - -

A6.26.5.3. Coffee brewer - - - -

A6.26.6. Bench ck components

A6.26.6.1. Oven - - - -

A6.26.6.2. Refrigerator - - - -

A6.26.6.3. Coffee brewer - - - -

A6.27. HYDRAULIC CONTROL/INDICATION WARNING CIRCUITS





A6.28. AIR TURBINE MOTOR






A6.28.5.1. ATM assembly - - - -

A6.28.5.2. Filters - - - -

A6.28.5.3. Exhaust duct - - - -

A6.28.6. Install

A6.28.6.1. ATM assembly - - - -

A6.28.6.2. Filters - - - -

A6.28.6.3. Exhaust duct - - - -

A6-28.7. Service ATM with oil - - - -

A6.29. ENGINE THRUST REVERSER INDICATING SYSTEM

TR: 1C-5A-2-4





A6.30. AIRCREW EYE RESPIRATORY PROTECTION SYSTEM (AERP)






95Attachment 6

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A6.31. COMMON MAINTENANCE PRACTICES

TR:

A6.31.1. Perform duties of Concurrent Servicing Supervisor (CSS) for fuel service operations

TR: TO 1C-5A-2-1, 00-25-172

- - - -

A6.31.2. Perform duties of Concurrent Servicing Supervisor(CSS) for liquid oxygen (LOX) servicing operations

TR: TO 1C-5A-2-1, 00-25-172

- - - -

A6.31.3. Operate FMS/GPS-800 control head for communication (UHF/VHF)

TR: TO 1C-5A-2-8-2S-34

- - - -

A6.31.4. Operate Auxiliary Power Unit (APU) and Air TurbineMotor (ATM)

TR: TO 1C-5A-2-4, 1C-5A-2-4CL-1

- - - -

A6.31.5. Operate C-5B MADAR II System

TR: 1C-5A-102, 1C-5A-102-1

- - - -

A6.31.6. Bench ck/repair linear and rotary actuators - - - -

A6.31.7. Inspect/troubleshoot RAT - - - -

A6.31.8. Inspect/Repair explosion proof lights - - - -


96Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 7






TR: APPLICABLE AIRCRAFT TO’S


A7.1.2. Operational Check System * - - - -




A7.1.5.1. Engine driven generator - - - -

A7.1.5.2. AC generator control panel - - - -

A7.1.5.3. AC bus control panel - - - -

A7.1.5.4. AC voltage regulator - - - -

A7.1.5.5. AC bus power relays - - - -

A7.1.5.6. 60 cycle converter - - - -

A7.1.6. Repair components - - - -


A7.1.7.1. Engine driven generator - - - -

A7.1.7.2. AC generator control panel - - - -

A7.1.7.3. AC bus control panel - - - -

A7.1.7.4. AC voltage regulator - - - -

A7.1.7.5. AC bus power relays - - - -

A7.1.7.6. 60 cycle converter - - - -








A7.2.5.1. DC aircraft batteries - - - -


A7.2.5.3. Transformer rectifiers - - - -



97Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A7.2.7.1. DC aircraft batteries - - - -


A7.2.7.3. Transformer rectifiers - - - -







A7.3.5. Remove and install components - - - -







A7.4.4 .Inspect System Components * - - - -


A7.4.5.1. Light plates * - - - -

A7.4.5.2. Lighting control panels - - - -


A7.4.7. Remove and install components

A7.4.7.1. Light plates * - - - -

A7.4.7.2. Lighting control panels - - - -








A7.5.5.1. Landing gear proximity switches - - - -

A7.5.5.2. Landing gear mechanical switches * - - - -


A7.5.6.1. Landing gear proximity switches - - - -

A7.5.6.2. Landing gear mechanical switches * - - - -

- - - -


98Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




A7.6.2. Operational check System * - - - -

A7.6.2.1. Servo valve - - - -

A7.6.2.2. Anti-skid control computer - - - -

A7.6.2.3. Ground control relay - - - -



A7.6.5. Remove wheel speed transducer - - - -


A7.6.7. Install wheel speed transducer - - - -

A7.7. NOSE GEAR SYSTEM















A7.8.5.1. Slat disagreement switch * - - - -

A7.8.5.2. Rudder travel unrestricted switch - - - -

A7.8.5.3. Rudder throw limiter stop switch - - - -

A7.8.5.4. Flap rudder position switch - - - -



A7.8.7.1. Slat disagreement switch * - - - -

A7.8.7.2. Rudder travel unrestricted switch - - - -

A7.8.7.3. Rudder throw limiter stop switch - - - -

A7.8.7.4. Flap rudder position switch - - - -

- - - -


99Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC













A7.10.2.1. Fire warning horn * - - - -

A7.10.2.2. Aft accessory compartment overheat system - - - -




A7.10.5.1. Engine fire detector loop * - - - -

A7.10.5.2. APU fire detector loop - - - -

A7.10.5.3. Fire detector control unit - - - -

A7.10.5.4. Extinguisher explosive cartridges * - - - -



A7.10.7.1. Engine fire detector loop * - - - -

A7.10.7.2. APU fire detector loop - - - -

A7.10.7.3. Fire detector control unit - - - -

A7.10.7.4. Extinguisher explosive cartridges * - - - -

A7.11. FLIGHT CONTROL TAKEOFF WARNING SYSTEM











100Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC































A7.16. ANTI-ICING SYSTEM




A7.16.2.1. Airfoil ice protection system - - - -

A7.16.2.2. Windows and windshield anti-icing/anti-fogging - - - -

A7.16.2.3. ICE protection control anticipator - - - -

A7.16.2.4 .ICE protection control thermostat - - - -


101Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




A7.16.5.1. Augmentation valve - - - -

A7.16.5.2. Pneumatic pilot pressure regulator - - - -


A7.16.7. Iinstall components

A7.16.7.1. Augmentation valve - - - -

A7.16.7.2. Pneumatic pilot pressure regulator - - - -
















A7.18.5.1. Air conditioning water separator * - - - -

A7.18.5.2. Heat exchanger cooling air fan - - - -

A7.18.5.3. Air conditioning pressure regulator valve - - - -

A7.18.5.4. Cooling turbine - - - -



A7.18.5.7. Instrument cooling fan * - - - -

A7.18.5.8. Radio rack cooling fan - - - -

A7.18.5.9. Temperature control valve and position indicator - - - -



A7.18.7.1. Air conditioning water separator * - - - -

A7.18.7.2. Heat exchanger cooling air fan - - - -

A7.18.7.3. Air conditioning pressure regulator valve - - - -


102Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




A7.18.7.7. Instrument cooling fan * - - - -

A7.18.7.8. Radio rack cooling fan - - - -

A7.18.7.9. Temperature control valve and position indicator - - - -








A7.19.5.1. Cabin pressure safety valve - - - -

A7.19.5.2. Cabin pressure controller - - - -

A7.19.5.3. Pneumatic pressure transmitter - - - -



A7.19.7.1. Cabin pressure safety valve - - - -


A7.19.7.3. Pneumatic pressure transmitter - - - -










TR: APPLICABLE AIRCRAFT TO’S; 15X-1-



A7.21.2.1. Crew Oxygen System * - - - -

A7.21.2.2 Patient Oxygen System * - - - -

A7.21.2.3 Therapeutic Oxygen system * - - - -


A7.21.3.1 Crew Oxygen System - - - -


103Attachment 7

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A7.21.3.2 Patient Oxygen System - - - -

A7.21.3.3 Therapeutic Oxygen system - - - -

A7.21.4 .Inspect System Components - - - -


A7.21.5.1. Build up and vent valve * - - - -

A7.21.5.2. Passenger converter - - - -

A7.21.5.3. Crew converter - - - -

A7.21.5.4. Diluter-demand regulator - - - -



A7.21.7.1. Build up and vent valve * - - - -

A7.21.7.2. Passenger converter - - - -

A7.21.7.3. Crew converter - - - -

A7.21.7.4. Diluter-demand regulator - - - -





A7.22.2.1. Fresh water service panel heat element - - - -

A7.22.2.2. Gallery waste water drain mast heater - - - -



A7.22.5. Remove vacuum pump * - - - -


A7.22.7. Install vacuum pump * - - - -


104Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 8





A8.1 AC POWER SYSTEM




A8.1.2.1. Generating and control system

TR: 1C-17A-2-24JG series

* - - - -

A8.1.2.2 .Interrogation of APU/EPCU


*R - - - -

A8.1.2.3. APU generation and control system


* - - - -

A8.1.2.4. Tie controls system


- - - -


A8.1.3.1. Electrical sys using FI manual

TR: 1C-17A-2-24FI-00-1

*R - - - -

A8.1.4 .Inspect System Components *R - - - -


A8.1.5.1. Current transformer


- - - -

A8.1.5.2. Remote power controller


- - - -

A8.1.5.3. Remote control circuit breaker


- - - -

A8.1.5.4. Electrical light transmitting indicating panel


- - - -

A8.1.5.5. Electrical control panel


*R - - - -

A8.1.5.6. Generator control unit


- - - -

A8.1.5.7. APU/EPCU


*R - - - -

A8.1.5.8. Frequency converter


- - - -


105Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A8.1.7.1. Current transformer


A8.1.7.2. Remote power controller


- - - -

A8.1.7.3. Remote control circuit breaker


- - - -

A8.1.7.4. Electrical Light Transmitting Indicating Panel


- - - -

A8.1.7.5. Electrical control panel


* - - - -

A8.1.7.6. Generator control unit


- - - -

A8.1.7.7. APU/EPCU


* - - - -

A8.1.7.8. Frequency converter


- - - -

A8.1.8 Bench check - - - -





A8.2.2.1 Power and control system (DC)


* - - - -

A8.2.2.2. Batteries system


- - - -

A8.2.2.3. Instrument power System


- - - -

A8.2.2.4 Electrical outlet system


- - - -

A8.2.2.5. Emergency power system


- - - -

A8.2.2.6. Electrical protection system


- - - -





106Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.2.5.1. Transformer rectifier


- - - -

A8.2.5.2. Four-wire electric plug on batteries


- - - -

A8.2.5.3. Main battery


- - - -

A8.2.5.4. Battery charger


- - - -

A8.2.5.5. Electrical outlet panel assembly


- - - -

A8.2.5.6. Electrical outlet power receptacle


- - - -

A8.2.5.7. Static inverter


- - - -

A8.2.5.8. Electrical grounding receptacle Connectors


- - - -



A8.2.7.1. Transformer rectifier


- - - -

A8.2.7.2. Four-wire electric plug on batteries


- - - -

A8.2.7.3 .Main battery


- - - -

A8.2.7.4. Battery charger


- - - -

A8.2.7.5. Electrical outlet panel assembly


- - - -

A8.2.7.6. Electrical outlet power receptacle


- - - -

A8.2.7.7. Static inverter


- - - -

A8.2.7.8. Electrical grounding receptacle connectors


- - - -

A8.2.8. Bench check - - - -

A8.2.9. Connect/disconnect main battery


* - - - -

- - - -


107Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC





A8.3.2.1. APU system operation

TR: 1C-C17A-2-49JG-00-1

* - - - -

A8.3.2.2. APU inlet door actuation system operational checkout

TR: 1C-C17A-2-49JG-10-1

- - - -


A8.3.3.1. APU systems using FI manual

TR: 1C-C17A-2-49FI-00-1

*R - - - -

A8.3.4. Inspect System Components *R - - - -


A8.3.5.1. External electrical power receptacle connector


- - - -

A8.3.5.2. APU inlet door open proximity sensor

TR: 1C-C17A-2-49JG-10-1

- - - -

A8.3.5.3. APU inlet door closed proximity sensor

TR: 1C-C17A-2-49JG-10-1

- - - -

A8.3.5.4. APU start and control panel

TR: 1C-C17A-2-49JG-60-1

- - - -

A8.3.5.5. APU boost voltage regulator

TR: 1C-C17A-2-49JG-60-1

- - - -

A8.3.5.6. APU hourmeter

TR: 1C-C17A-2-49JG-70-1

- - - -



A8.3.7.1. External electrical power receptacle connector


- - - -

A8.3.7.2. APU inlet door open proximity sensor

TR: 1C-C17A-2-49JG-10-1

- - - -

A8.3.7.3. APU inlet door closed proximity sensor

TR: 1C-C17A-2-49JG-10-1

- - - -

A8.3.7.4. APU start and control panel

TR: 1C-C17A-2-49JG-60-1

- - - -

A8.3.7.5. APU boost voltage regulator

TR: 1C-C17A-2-49JG-60-1

- - - -

- - - -


108Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.3.7.6. APU hourmeter

TR: 1C-C17A-2-49JG-70-1

- - - -


A8.3.9. Connect/disconnect ext elect. power


* - - - -





A8.4.2.1. Instrument and panel system


- - - -

A8.4.2.2. Main instr, t-storm/emer backup and nvg lighting control


- - - -

A8.4.2.3. Glareshield floodlight


- - - -

A8.4.2.4. Overhead panel floodlight


- - - -

A8.4.2.5. Pedestal floodlight


- - - -

A8.4.2.6. EPC floodlight assembly


- - - -

A8.4.2.7. Pilot t-storm light


- - - -

A8.4.2.8. Cockpit dome light


- - - -

A8.4.2.9. EPC maintenance light


- - - -

A8.4.2.10. Portable cockpit utility light assembly


- - - -

A8.4.2.11. Flt compartment reading light


- - - -

A8.4.2.12. Floor light assembly


- - - -

A8.4.2.13. Crew rest area flood light


- - - -

A8.4.2.14. Flight deck stairway light


- - - -

A8.4.2.15. Crew rest area reading light - - - -


109Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.4.2.16. Bunk area reading light


- - - -

A8.4.2.17. Lav lights


- - - -

A8.4.2.18. Lav emergency call


- - - -

A8.4.2.19. Galley table floodlight


- - - -

A8.4.2.20. Aisle system


- - - -

A8.4.2.21. Passenger warning sign


- - - -

A8.4.2.22. Aeromedical lightning/call system


- - - -

A8.4.2.23. Cargo and service compartments system


- - - -

A8.4.2.24. Cargo incandescent light assembly


- - - -

A8.4.2.25. Fluorescent light assembly


- - - -

A8.4.2.26. Wheelwell service light


- - - -

A8.4.2.27. Nose landing gear lock spot light


- - - -

A8.4.2.28. Service/inspection light


- - - -

A8.4.2.29. External power panel light assembly


- - - -

A8.4.2.30. Vertical stabilizer flood service light


- - - -

A8.4.2.31. Loadmaster instrument and control panel system


- - - -

A8.4.2.32. Loadmaster station fluorescent desk light


- - - -

A8.4.2.33. Forward loadmaster panel illuminating light assembly


- - - -

A8.4.2.34. Aft loadmaster panel illuminating light assembly - - - -


110Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.4.2.35. Evaluator/instructor reading light assembly


- - - -

A8.4.2.36. Curb light


- - - -

A8.4.2.37. Portable inspection light


- - - -

A8.4.2.38. Landing system


- - - -

A8.4.2.39. Nose retractable landing light assembly


- - - -

A8.4.2.40. Cargo staging floodlight


- - - -

A8.4.2.41. Navigation system


- - - -

A8.4.2.42. Anti-collision system


- - - -

A8.4.2.43. Wing and engine nacelle scan system


- - - -

A8.4.2.44. High intensity recognition system


- - - -

A8.4.2.45. Formation system


- - - -

A8.4.2.46. Aerial refueling light


- - - -

A8.4.2.47. UARRSI perimeter illuminating panel


- - - -

A8.4.2.48. Emergency lighting and power system


* - - - -

A8.4.2.49. Refuel lighting system


- - - -


A8.4.3.1. Lighting system using FI manual

TR: 1C-17A-2-33FI-00-1

* - - - -



A8.4.5.1. Instrument and panel transmitting and indicating panels


- - - -


111Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.4.5.2. Annunciator dimming unit


*R - - - -

A8.4.5.3. Pilot ,copilot, and pedestal light transmitting panels


- - - -

A8.4.5.4. Stairway light transmitting indicating panel


- - - -

A8.4.5.5. Personnel warning light transmitting indicating panel


- - - -

A8.4.5.6. Aeromedical light transmitting indicating panel


- - - -



- - - -

A8.4.5.8. Loadmaster instrument and control panel system components


- - - -

A8.4.5.9. Loadmaster instrument and control panel annunciator dimming unit


- - - -

A8.4.5.10. Anti-collision light power supply


- - - -

A8.4.5.11. Recognition light power supply


- - - -



- - - -

A8.4.5.13. Emergency battery


* - - - -

A8.4.5.14. UARRSI lamp


- - - -



A8.4.7.1. Instrument and panel transmitting and indicating panels


- - - -

A8.4.7.2. Annunciator dimming unit


*R - - - -

- - - -

A8.4.7.3. Pilot ,copilot, and pedestal light transmitting panels


- - - -

A8.4.7.4. Stairway light transmitting indicating panel - - - -


112Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.4.7.5. Personnel warning light transmitting indicating panel


- - - -

A8.4.7.6. Aeromedical Light Transmitting indicating panel

TR: 1C-17A-2-33JG Series

- - - -



- - - -

A8.4.7.8. Loadmaster instrument and control panel system components


- - - -

A8.4.7.9. Loadmaster instrument and control panel annunciator dimming unit


*R - - - -

A8.4.7.10. Anti-collision light power supply


- - - -

A8.4.7.11. Recognition light power supply


- - - -



- - - -

A8.4.7.13. Emergency battery


* - - - -

A8.4.7.14. UARRSI lamp


- - - -

A8.4.8. Bench check


TR:

- - - -



A8.5.2.1. MLG normal sys


- - - -

A8.5.2.2. NLG normal sys


- - - -

A8.5.2.3. Gear handle electrical interlock system


- - - -

- - - -

- - - -


A8.5.3.1. Landing gear sys. using FI manual

TR: 1C-17A-2-32FI-00-1

* - - - -


113Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A8.5.5.1. Weight-on-wheels (WOW) proximity sensor


- - - -

A8.5.5.2. LG control/indication pnl


* - - - -

A8.5.5.3 .Main landing gear downlock proximity sensor


- - - -

A8.5.5.4. Main landing gear uplock proximity sensor


- - - -

A8.5.5.5. Nose landing gear down proximity sensor


- - - -

A8.5.5.6. Nose landing lock proximity sensor


- - - -



A8.5.7.1. Weight-on-wheels (WOW) proximity sensor


- - - -

A8.5.7.2. LG control/indication pnl


* - - - -

A8.5.7.3. Main landing gear downlock proximity sensor


- - - -

A8.5.7.4. Main landing gear uplock proximity sensor


- - - -

A8.5.7.5. Nose landing gear down proximity sensor


- - - -

A8.5.7.6. Nose landing lock proximity sensor


- - - -






A8.6.2.1. Anti-skid sys


*R - - - -

A8.6.2.2. Brake pressure indicator


- - - -



114Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A8.6.5.1. Wheel speed transducer adapter assembly


- - - -

A8.6.5.2. Proximity sensor


- - - -

A8.6.5.3. Anti-skid/brake temp monitor control unit


*R - - - -

A8.6.5.4. Wheel speed transducer


* - - - -

A8.6.5.5. Brake temp sensor


* - - - -

A8.6.5.6. Brake temp data acquisition unit


- - - -

A8.6.5.7. Brake sys pressure gage


- - - -



- - - -



A8.6.7.1. Wheel speed transducer adapter assembly


- - - -

A8.6.7.2. Proximity sensor


- - - -

A8.6.7.3. Anti-skid/brake temp monitor control unit


* - - - -

A8.6.7.4. Wheel speed transducer


* - - - -

A8.6.7.5. Brake temp sensor


* - - - -

A8.6.7.6. Brake temp data acquisition unit


- - - -

A8.6.7.7. Brake sys pressure gage


- - - -

- - - -



- - - -



115Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC





A8.7.4 .Inspect System Components - - - -

A8.7.5. Remove components - - - -


















A8.9.2.1. Engine fire system


*R - - - -

A8.9.2.2. Accessory compt fire detection assembly


- - - -

A8.9.2.3. Firing capability test of APU fire control panel


- - - -

A8.9.2.4. Continuity test of APU fire control panel


- - - -

A8.9.2.5. Agent low press indicating test of APU fire control panel


- - - -

A8.9.2.6. Horn silencing test of APU fire control panel


- - - -

A8.9.2.7. Underfloor APU fire warning horn


- - - -


116Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.9.2.8. Smoke detection sys


*R - - - -

A8.9.2.9. Engine firing capability test


- - - -

A8.9.2.10. Engine fire continuity test


- - - -

A8.9.2.11. Engine fire agent low pressure indicating test


- - - -

A8.9.2.12. Firing capability test for APU panels


- - - -

A8.9.2.13. Continuity test for APU panels


- - - -

A8.9.2.14. Agent low pressure indicating - - - -

A8.9.2.15. Test for APU panel


- - - -


A8.9.3.1. Fire protection sys. using FI manual

TR: 1C-17A-2-26FI-00-1

* - - - -



A8.9.5.1. Engine fire detector controller


*R - - - -

A8.9.5.2. Accessory compartment fire detection assembly


- - - -

A8.9.5.3. Eng accessory compt fire detector sensor


- - - -

A8.9.5.4. Core compt fire detection assembly


- - - -

A8.9.5.5. Eng core compt fire detector Sensor


- - - -

A8.9.5.6. Fire control switch handle


- - - -

A8.9.5.7. Fire handle incandescent lamp


- - - -

A8.9.5.8. APU fire control panel


- - - -

A8.9.5.9. Underfloor APU electric fire warning horn


- - - -


117Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.9.5.10. APU fire detector controller


* - - - -

A8.9.5.11. APU fire detection assembly


- - - -

A8.9.5.12. Fire detector sensor on APU


- - - -

A8.9.5.13. Cargo floor smoke detector indicator panel


* - - - -

A8.9.5.14. Cargo compt curb smoke detectors (opaque particle)


*R - - - -

A8.9.5.15. Cargo compt ceiling smoke detectors


*R - - - -

A8.9.5.16. Lavatory smoke detector


*R - - - -

A8.9.5.17. Crew rest smoke detector


*R - - - -

A8.9.5.18. Avionics compt smoke detector


*R - - - -

A8.9.5.19. Lower avionics rack inertial ref unit smoke detector


*R - - - -

A8.9.5.20 Inertial ref unit rack smoke detector


*R - - - -

A8.9.5.21. Engine fire ext discharge cartridge


*R - - - -

A8.9.5.22. Engine fire extinguisher container


- - - -

A8.9.5.23. Engine fire extinguisher discharge head


- - - -

A8.9.5.24. Engine fire fuel shutoff gate valve


- - - -

A8.9.5.25. Engine fire fuel shutoff gate valve actuator


- - - -

A8.9.5.26. Engine hydraulic shutoff ball valve


- - - -

A8.9.5.27. APU fire ext discharge cartridge


*R - - - -

A8.9.5.28. APU fire extinguisher container


- - - -


118Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.9.5.29. Portable fire extinguisher


- - - -



A8.9.7.1. Engine fire detector controller


*R - - - -

A8.9.7.2 .Accessory compartment fire detection assembly


- - - -

A8.9.7.3. Eng accessory compt fire detector sensor


- - - -

A8.9.7.4. Core compt fire detection assembly


- - - -

A8.9.7.5. Eng core compt fire detector sensor


- - - -

A8.9.7.6. Fire control switch handle


- - - -

A8.9.7.7. Fire handle incandescent lamp


- - - -

A8.9.7.8. APU fire control panel


- - - -

A8.9.7.9. Underfloor APU electric fire warning horn


- - - -

A8.9.7.10. APU fire detector controller


* - - - -

A8.9.7.11. APU fire detection assembly


- - - -

A8.9.7.12. Fire detector sensor on APU


- - - -

A8.9.7.13. Cargo floor smoke detector indicator panel


* - - - -

A8.9.7.14. Cargo compt curb smoke detectors (opaque particle)


*R - - - -

A8.9.7.15. Cargo compt ceiling smoke detectors


*R - - - -

A8.9.7.16. Lavatory smoke detector


*R - - - -

A8.9.7.17. Crew rest smoke detector


*R - - - -


119Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.9.7.18. Avionics compt smoke detector


*R - - - -

A8.9.7.19. Lower avionics rack inertial ref unit smoke detector


*R - - - -

A8.9.7.20. Inertial ref unit rack smoke detector


*R - - - -

A8.9.7.21. Engine fire ext discharge cartridge


*R - - - -

A8.9.7.22. Engine fire extinguisher container


- - - -

A8.9.7.23. Engine fire extinguisher discharge head


- - - -

A8.9.7.24. Engine fire fuel shutoff gate valve


- - - -

A8.9.7.25. Engine fire fuel shutoff gate valve actuator


- - - -

A8.9.7.26. Engine hydraulic shutoff ball valve


- - - -

A8.9.7.27. APU fire ext discharge cartridge


*R - - - -

A8.9.7.28. APU fire extinguisher container


- - - -

A8.9.7.29. Portable fire extinguisher


- - - -


A8.10 ICE AND RAIN PROTECTION SYSTEM

TR: 1C-17A-2-30 SERIES



A8.10.2.1. Airfoil and air intakes


- - - -

A8.10.2.2. Windows and windshield


*R - - - -


A8.10.3.1. Ice & rain protection sys. using FI manual

TR: 1C-17A-2-30FI-00-1

* - - - -




120Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.10.5.1. Anti-ice control panel assembly


- - - -

A8.10.5.2. Wing anti-ice shutoff valve


- - - -

A8.10.5.3. Wing slat number two anti-ice telescopic duct


- - - -

A8.10.5.4. Wing slat number three anti-ice telescopic duct


- - - -

A8.10.5.5. Wing slat number four anti-ice telescopic duct


- - - -

A8.10.5.6. Wing anti-ice low temperature sensor


- - - -

A8.10.5.7. XFS 853 to 896 leading edge slat 4 anti ice duct assembly


- - - -

A8.10.5.8. XFS 818 to 853 leading edge slat outbd anti-ice ductassembly


- - - -

A8.10.5.9. XFS 772 to 818 leading edge slat outbd wing anti-ice duct assembly


- - - -

A8.10.5.10. XFS 730 to 772 leading edge slat outbd wing anti-iceduct assembly


- - - -



- - - -

A8.10.5.12. XFS 651 to 682 leading edge anti-ice elbow duct assembly


- - - -

A8.10.5.13. XFS 620 to 651 leading edge anti-ice flexible duct assembly


- - - -

A8.10.5.14. XFS 602 to 651 leading edge anti-ice tee duct assembly


- - - -

A8.10.5.15. XFS 569 to 609 leading edge anti-ice flexible elbow duct assembly


- - - -

A8.10.5.16. XFS 576 to 597 leading edge anti-ice venturi duct assembly


- - - -


121Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.10.5.17. XFS 510 to 569 leading edge slat number 2 outbd anti-ice duct


- - - -

A8.10.5.18. XFS 477 to 510 anti-ice duct assembly


- - - -

A8.10.5.19. 430 to 477 leading edge eng wing bleed air duct assembly


- - - -

A8.10.5.20. 416 to 430 slat 2 leading edge anti-ice duct assembly


- - - -

A8.10.5.21. Engine cowl anti-ice low temperature sensor


- - - -

A8.10.5.22. Engine cowl anti-ice venturi duct assembly


- - - -

A8.10.5.23. Windshield anti-ice controller


*R - - - -

A8.10.5.24. Window defog controller


*R - - - -



A8.10.7.1. Anti-ice control panel assembly


- - - -

A8.10.7.2. Wing anti-ice shutoff valve


- - - -

A8.10.7.3. Wing slat number two anti-ice telescopic duct


- - - -

A8.10.7.4. Wing slat number three anti-ice telescopic duct


- - - -

A8.10.7.5. Wing slat number four anti-ice telescopic duct


- - - -

A8.10.7.6. Wing anti-ice low temperature sensor


- - - -

A8.10.7.7. XFS 853 to 896 leading edge slat 4 anti ice duct assembly


- - - -

A8.10.7.8. XFS 818 to 853 leading edge slat outbd anti-ice duct assembly


- - - -


- - - -


122Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




- - - -



- - - -

A8.10.7.12. XFS 651 to 682 leading edge anti-ice elbow duct assembly


- - - -

A8.10.7.13. XFS 620 to 651 leading edge edge anti-ice flexibleduct assembly


- - - -

A8.10.7.14. XFS 602 to 651 leading edge anti-ice tee duct assembly


- - - -

A8.10.7.15. XFS 569 to 609 leading edge edge anti-ice flexible elbow duct assembly


- - - -

A8.10.7.16. XFS 576 to 597 leading edge edge anti-ice venturiduct assembly


- - - -

A8.10.7.17. XFS 510 to 569 leading edge slat number 2 outbd anti-ice duct


- - - -

A8.10.7.18. XFS 477 to 510 anti-ice duct assembly


- - - -

A8.10.7.19. 430 to 477 leading edge eng wing bleed air duct assembly


- - - -

A8.10.7.20. 416 to 430 slat 2 leading edge anti-ice duct assembly


- - - -

A8.10.7.21. Engine cowl edge anti-ice low temperature sensor


- - - -

A8.10.7.22. Engine cowl anti-ice venturi duct assembly


- - - -

A8.10.7.23. Windshield anti-ice controller


*R - - - -

A8.10.7.24. Window defog controller


*R - - - -

A8.10.8. Bench check - - - -

A8.11. ONBOARD INERT GAS GENERATION SYSTEM


123Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

(OBIGGS)




A8.11.2.1. Onboard inert gas generation system

TR: 1C-C17A-2-47JG-00-1

* - - - -

A8.11.2.2 .Interrogation onboard inert gas generation system

TR: 1C-C17A-2-47JG-00-1

* - - - -

A8.11.2.3 .Air separation module

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.2.4. Crossfeed bleed air shutoff valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.2.5. APU bleed air shutoff valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.2.6. Distribution crossfeed valve

TR: 1C-C17A-2-47JG-20-1

- - - -


A8.11.3.1 .Inert (OBIGGS) sys using FI manual

TR: 1C-C17A-2-47FI-00-1

* - - - -



A8.11.5.1. Inflow check valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.2. Ducts associated with overheat sensing elements

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.3. Precooler

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.4. Air separation module

TR: 1C-C17A-2-47JG-10-1

* - - - -

A8.11.5.5. Air separation module air filter

TR: 1C-C17A-2-47JG-10-1

*R - - - -

A8.11.5.6. Air compressor

TR: 1C-C17A-2-47JG-10-1

* - - - -

A8.11.5.7. Air compressor air filter

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.8. Air compressor filter element

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.9. Bleed air pressure regulator valve *R - - - -


124Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-C17A-2-47JG-10-1

A8.11.5.10. Bleed air overpressure valve

TR: 1C-C17A-2-47JG-10-1

*R - - - -

A8.11.5.11. Cooling air control valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.12. Bleed air check valve

TR: 1C-C17A-2-47JG-10-1

- - - -


TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.14. Supply shutoff valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.15. Fluid purity controller

TR: 1C-C17A-2-47JG-10-1

* - - - -

A8.11.5.16. Heat exchanger

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.17. Heat exchanger bypass valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.18. Temperature sensitive element

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.19. Remote mount solenoid pilot valve unit

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.20. Wheel pod temperature sensitive element

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.5.21. Pressure transmitter

TR: 1C-C17A-2-47JG-10-1

- - - -


TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.5.23. High pressure regulating valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.5.24. Low pressure regulating valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.5.25. Double relief valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.5.26. High pressure relief valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.5.27. Rupture disk

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.5.28. Nitrogen storage tank pressure gauge - - - -


125Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-C17A-2-47JG-40-1

A8.11.5.29. Overheat detector sensing element

TR: 1C-C17A-2-47JG-40-1

- - - -

A8.11.5.30. OBIGGS system precooler outlet grille

TR: 1C-C17A-2-54JG-60-1

- - - -


TR: 1C-C17A-2-47JG-40-1

- - - -



A8.11.7.1. Inflow check valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.2. Ducts associated with overheat sensing elements

TR: 1C-C17A-2-47JG-10-1

- - - -


TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.4. Air separation module

TR: 1C-C17A-2-47JG-10-1

* - - - -

A8.11.7.5. Air separation module air filter

TR: 1C-C17A-2-47JG-10-1

*R - - - -

A8.11.7.6. Air compressor

TR: 1C-C17A-2-47JG-10-1

* - - - -

A8.11.7.7. Air compressor air filter

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.8. Air compressor filter element

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.9. Bleed air pressure regulator valve

TR: 1C-C17A-2-47JG-10-1

* - - - -

A8.11.7.10. Bleed air overpressure valve

TR: 1C-C17A-2-47JG-10-1

*R - - - -

A8.11.7.11. Cooling air control valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.12. Bleed air check valve

TR: 1C-C17A-2-47JG-10-1

- - - -


TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.14. Supply shutoff valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.15. Fluid purity controller * - - - -


126Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-C17A-2-47JG-10-1

A8.11.7.16. Heat exchanger

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.17. Heat exchanger bypass valve

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.18. Temperature sensitive element

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.19. Remote mount solenoid pilot valve unit

TR: 1C-C17A-2-47JG-10-1

- - - -

A8.11.7.20. Wheel pod temperature sensitive element

TR: 1C-C17A-2-47JG-10-1

- - - -


TR: 1C-C17A-2-47JG-10-1

- - - -


TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.7.23. High pressure regulating valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.7.24. Low pressure regulating valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.7.25. Double relief valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.7.26. High pressure relief valve

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.7.27. Rupture disk

TR: 1C-C17A-2-47JG-20-1

- - - -

A8.11.7.28. Nitrogen storage tank pressure gauge

TR: 1C-C17A-2-47JG-40-1

- - - -

A8.11.7.29. Overheat detector sensing element

TR: 1C-C17A-2-47JG-40-1

- - - -

A8.11.7.30. OBIGGS system precooler outlet grille

TR: 1C-C17A-2-54JG-60-1

- - - -


TR: 1C-C17A-2-47JG-40-1

- - - -

A8.11.8. Bench check - - - -

A8.11.9. Drain OBIGGS Sys.


* - - - -

A8.11.10. Service OBIGGS Sys.


*R - - - -


127Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.12. INDICATING & RECORDING SYSTEM




A8.12.2.1. Proximity sensing system


- - - -

A8.12.2.2. Sensor signal interface unit to view/erase faults


* - - - -

A8.12.2.3. Aural warning sys


- - - -

A8.12.2.4. Visual warning & caution sys


- - - -

A8.12.2.5. Multifunction display sys (MFD)


*R - - - -


A8.12.3.1. Indicating & recording sys. using FI manual

TR: 1C-17A-2-31FI-00-1

*R - - - -

A8.12.4 .Inspect System Components *R - - - -


A8.12.5.1. Warning & caution computer (WACC)


* - - - -

A8.12.5.2. Warning & caution annunciator panel (WAP)


*R - - - -

A8.12.5.3. Sensor signal interface Unit


* - - - -




- - - -

A8.12.6.2 WCC Data bus line - - - -


A8.12.7.1. Warning & caution computer (WACC)


* - - - -



*R - - - -

A8.12.7.3. Sensor signal interface unit


* - - - -

A8.12.8. Bench check - - - -



128Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-17A-2-52JG SERIES



A8.13.2.1. Door actuating & indicating sys


- - - -

A8.13.2.2. Open/close cargo ramp/door automatically

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.2.3. Open/close cargo ramp/door manually

TR: 1C-C17A-2-52JG-30-1

- - - -


A8.13.3.1. Door sys using FI manual

TR: 1C-C17A-2-52FI-00-1

* - - - -



A8.13.5.1. Cargo door uplock prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.5.2. Cargo door position transmitter

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.5.3. Cargo ramp up limit prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.5.4. ADS link prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.5.5. Cargo ramp prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.5.6. Cargo ramp actuating cylinder

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.5.7. Door/status pnl

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.8. Crew door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.9. Crew door down/locked prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.10. Emergency exit door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.11. Maint/ditch access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.12. Maint (tunnel) access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -


129Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.13.5.13. Side equipment access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.14. Vert stab (tunnel) access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.15. Horizontal stab access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.16. Ram air turbine door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.17. Cargo ramp locked prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.18. Troop door air deflector prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.5.19. Troop door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -



A8.13.7.1. Cargo door uplock prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.7.2. Cargo door position transmitter

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.7.3. Cargo ramp up limit prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.7.4. ADS link prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.7.5. Cargo ramp prox sensor

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.7.6. Cargo ramp actuating cylinder

TR: 1C-C17A-2-52JG-30-1

- - - -

A8.13.7.7. Door/status pnl

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.8. Crew door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.9. Crew door down/locked prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.10. Emergency exit door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.11. Maint/ditch access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -


130Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.13.7.12. Maint (tunnel) access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.13. Side equipment access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.14. Vert stab (tunnel) access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.15. Horizontal stab access door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.16. Ram air turbine door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.17. Cargo ramp locked prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.18. Troop door air deflector prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.7.19. Troop door prox sensor

TR: 1C-C17A-2-52JG-70-1

- - - -

A8.13.8. Bench check - - - -

A8.14. CARGO HANDLING/MISSION SYSTEM




A8.14.2.1. Door actuating & indicating sys


- - - -

A8.14.2.2. Ads locks control pnl

TR: 1C-C17A-2-41JG-10-1

- - - -

A8.14.2.3. Variable restraint assembly

TR: 1C-C17A-2-41JG-10-1

- - - -

A8.14.2.4. Cargo compartment logistic pallet control pnl

TR: 1C-C17A-2-41JG-10-1

- - - -

A8.14.2.5. Support/stab strut sys

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.2.6. Cargo winch sys

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.2.7. CDS sys

TR: 1C-C17A-2-41JG-30-1

- - - -

A8.14.2.8. Tow release mechanism

TR: 1C-C17A-2-41JG-30-1

- - - -

A8.14.2.9. Parachute deployment mechanism - - - -


131Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-C17A-2-41JG-30-1

A8.14.2.10. ADS control panel

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.2.11. Forward loadmaster control panel

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.2.12. ADS backup control panel

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.2.13. Aft loadmaster control panel

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.2.14. ADS controller

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.2.15. Operate support/stab strut for maint

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.2.16. Operate parachute deployment automatic

TR: 1C-C17A-2-41JG-30-1

- - - -

A8.14.2.17. Operate support/stab strut for cargo

TR: 1C-C17A-2-41JG-20-1

- - - -


A8.14.3.1. Cargo handling/mission sys using FI manual

TR: 1C-C17A-2-41FI-00-1

*R - - - -



A8.14.5.1. ADS locks control pnl

TR: 1C-C17A-2-41JG-10-1

- - - -


TR: 1C-C17A-2-41JG-10-1

- - - -

A8.14.5.3. Target switch

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.5.4. Up prox sensor

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.5.5. Vertical prox sensor

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.5.6. Stab strut door actuator plunger switch

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.5.7. Tow plate armed prox sensor

TR: 1C-C17A-2-41JG-30-1

- - - -

A8.14.5.8. Drogue chute deployed prox sensor

TR: 1C-C17A-2-41JG-30-1

- - - -


132Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.14.5.9. Pendant control

TR: 1C-C17A-2-41JG-40-1

- - - -

A8.14.5.10. Pilot/copilot ADS control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.11. Forward loadmaster control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.12. ADS backup control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.13. Aft loadmaster control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.14. Forward loadmaster winch control panel

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.15. Aft loadmaster winch control panel

TR: 1C-C17A-2-41JG-50-1

- - - -


TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.17. ADS controller cooling fan

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.5.18. Patient monitoring panel

TR: 1C-C17A-2-41JG-60-1

- - - -

A8.14.5.19. Tow severance assembly * - - - -



A8.14.7.1. ADS locks control pnl

TR: 1C-C17A-2-41JG-10-1

- - - -


TR: 1C-C17A-2-41JG-10-1

- - - -

A8.14.7.3. Target switch

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.7.4. Up prox sensor

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.7.5. Vertical prox sensor

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.7.6. Stab strut door actuator plunger switch

TR: 1C-C17A-2-41JG-20-1

- - - -

A8.14.7.7. Tow plate armed prox sensor

TR: 1C-C17A-2-41JG-30-1

- - - -

A8.14.7.8. Drogue chute deployed prox sensor - - - -


133Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-C17A-2-41JG-30-1

A8.14.7.9. Pendant control

TR: 1C-C17A-2-41JG-40-1

- - - -

A8.14.7.10. Pilot/copilot ADS control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.11. Forward loadmaster control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.12. ADS backup control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.13. Aft loadmaster control panel assembly

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.14. Forward loadmaster winch control panel

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.15. Aft loadmaster winch control panel

TR: 1C-C17A-2-41JG-50-1

- - - -


TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.17. ADS controller cooling fan

TR: 1C-C17A-2-41JG-50-1

- - - -

A8.14.7.18. Patient monitoring panel

TR: 1C-C17A-2-41JG-60-1

- - - -

A8.14.7.19. Tow severance assembly * - - - -

A8.14.8. Bench check - - - -





A8.15.2.1. Inert control panel


- - - -

A8.15.2.2. Refueling & defueling sys


- - - -

A8.15.2.3. Ground refueling control panel


- - - -

A8.15.2.4. Engine start fuel sys control panel


- - - -

A8.15.2.5. APU fuel fire shutoff valve


- - - -



134Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.15.3.1. Fuel Sys using FI manual

TR: 1C-17A2-28FI-00-1

*R - - - -



A8.15.5.1. Check inert control panel


- - - -



- - - -



*R - - - -



A8.15.7.1. Check inert control panel


- - - -



- - - -



*R - - - -

A8.15.8. Bench check - - - -






A8.16.3.1. Powerplant start system using FI manual

TR: 1C-C17A-2-80FI-00-1

*R - - - -





A8.16.8. Bench check - - - -





A8.17.2.1. Interrogation of manifold failure detection controller

TR: 1C-C17A-2-36JG-20-1

* - - - -



135Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.17.3.1. Pneumatic sys. using FI manual

TR: 1C-17A-2-36FI-00-1

* - - - -



A8.17.5.1. High stage valve inlet pressure sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.2. Precooler inlet temperature sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.3. Mid stage check valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.4. High stage regulator pilot valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.5. High stage butterfly valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.6. Pneumatic high stage manifold

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.7. Pneumatic ducting

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.8. High stage valve exit pressure sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.9. Pylon pressure regulator butterfly valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.10. Pylon regulator pilot valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.11. Pylon pressure regulator sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.12. Pylon overpressure shutoff valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.13. Precooler differential pressure sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.14. Fan air valve

TR: 1C-17A-2-36FI-00-1

- - - -


TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.16. Precooler exit temperature sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.17. Pneumatic ground service connector

TR: 1C-17A-2-36FI-00-1

- - - -


136Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.17.5.18. Engine fan air seal ring

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.19. Center fuselage isolation valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.20. APU check valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.5.21. Wing manifold pressure sensor

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.5.22. Overheat detector sensing element of MFD system

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.5.23. Manifold failure detection controller

TR: 1C-C17A-2-36JG-20-1

* - - - -

A8.17.5.24. Wing differential pressure switch

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.5.25. Engine cowl differential pressure switch

TR: 1C-C17A-2-36JG-20-1

- - - -


A8.17.6.1. Pneumatic duct by sealing insulation cover

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.6.2. Pneumatic duct by patching insulation cover

TR: 1C-17A-2-36FI-00-

- - - -


A8.17.7.1. High stage valve inlet pressure sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.2. Precooler inlet temperature sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.3. Mid stage check valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.4. High stage regulator pilot valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.5. High stage butterfly valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.6. Pneumatic high stage manifold

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.7. Pneumatic ducting

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.8. High stage valve exit pressure Sensor

TR: 1C-17A-2-36FI-00-1

- - - -


137Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.17.7.9. Pylon pressure regulator butterfly valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.10. Pylon regulator pilot valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.11. Pylon pressure regulator sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.12. Pylon overpressure shutoff valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.13. Precooler differential pressure sensor

TR: 1C-17A-2-36FI-00-1

- - - -


TR: 1C-17A-2-36FI-00-1

- - - -


TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.16. Precooler exit temperature sensor

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.17. Pneumatic ground service connector

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.18. Engine fan air seal ring

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.19. Center fuselage isolation valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.20. APU check valve

TR: 1C-17A-2-36FI-00-1

- - - -

A8.17.7.21. Wing manifold pressure sensor

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.7.22. Overheat detector sensing element of MFD system

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.7.23. Manifold failure detection controller

TR: 1C-C17A-2-36JG-20-1

* - - - -

A8.17.7.24. Wing differential pressure switch

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.7.25. Engine cowl differential pressure switch

TR: 1C-C17A-2-36JG-20-1

- - - -

A8.17.8. Bench check - - - -





138Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.18.2.1. Air conditioning system


* - - - -

A8.18.2.2. Interrogation of air conditioning system


* - - - -

A8.18.2.3. Cargo compt circulation fan


- - - -

A8.18.2.4. Avionics equip inlet temperature sensor


- - - -

A8.18.2.5. Avionics flow sensors


- - - -

A8.18.2.6. Cargo compt ground ventilation fan


- - - -

A8.18.2.7. Cargo air shutoff valve


- - - -

A8.18.2.8. Temperature control panel


- - - -

A8.18.2.9. Ram air ventilation valve


- - - -

A8.18.2.10. Cargo floor heater strip


- - - -

A8.18.2.11. Ramp floor heating system


- - - -

A8.18.2.12. Environmental control system controller


* - - - -


A8.18.3.1. Air conditioning sys using FI manual

TR: 1C-17A-2-21FI-00-1

* - - - -



A8.18.5.1. Conditioned air check valve


- - - -

A8.18.5.2. Conditioned air duct relief valve


- - - -

A8.18.5.3. Flow distribution mix chamber


- - - -

A8.18.5.4. Environmental control panel assembly


*R - - - -


139Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



- - - -

A8.18.5.6. Cargo compartment recirculation check Valve


- - - -

A8.18.5.7. Cargo compartment circulation fan


- - - -

A8.18.5.8. Filter element for cargo compt circulation fan


- - - -

A8.18.5.9. Ground conditioned air check valve


- - - -

A8.18.5.10. Crew air shutoff valve


- - - -

A8.18.5.11. Manual globe air valve


- - - -

A8.18.5.12. Avionics cooling fan


- - - -

A8.18.5.13. Avionics cooling fan check valve


- - - -

A8.18.5.14. Avionics cooling outflow valve


- - - -

A8.18.5.15. Augmentation Valve


- - - -

A8.18.5.16. Cooling avionics heat exchanger bypass valve


- - - -

A8.18.5.17. Backup avionics outflow valve


- - - -

A8.18.5.18. Ground inlet shutoff valve


- - - -

A8.18.5.19. Avionics equipment inlet temperature sensors


- - - -

A8.18.5.20. Avionics cooling shutoff valve


- - - -

A8.18.5.21. Avionics flow sensor


- - - -

A8.18.5.22. Cargo compt ground ventilation fan


- - - -



- - - -


140Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



- - - -

A8.18.5.25. Loadmaster station manual globe air valve


- - - -



- - - -

A8.18.5.27. Ram air vent valve actuator


- - - -



- - - -

A8.18.5.29. Ramp heater/blower


- - - -

A8.18.5.30. Ramp floor thermostat


- - - -

A8.18.5.31 .Flow control valve


- - - -

A8.18.5.32. Pack discharge thermostat


- - - -

A8.18.5.33. Water separator pack discharge temp sensor


- - - -

A8.18.5.34. Refrigeration Unit


- - - -

A8.18.5.35. Ram air plenum


- - - -

A8.18.5.36. Pack anti-ice valve


- - - -

A8.18.5.37. Turbine bypass valve


- - - -

A8.18.5.38. Air conditioning heat exchanger


- - - -

A8.18.5.39. Air cycle machine


- - - -

A8.18.5.40. Compressor discharge overtemp fusible plug on ACM


- - - -

A8.18.5.41. Turbine inlet overtemp fusible plug on ACM


- - - -

A8.18.5.42. Water injector nozzle


- - - -


141Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.18.5.43. Water separator assembly


- - - -

A8.18.5.44. Coalescer bag on water separator


* - - - -

A8.18.5.45. Bypass valve on water separator


- - - -

A8.18.5.46. Pressure sensor on water separator


- - - -

A8.18.5.47. Ram air inlet scoop assembly


- - - -

A8.18.5.48. Linear ram air electro-mechanical actuator


- - - -

A8.18.5.49. Ram air exhaust valve assembly


- - - -

A8.18.5.50. Ram air inlet duct assembly


- - - -

A8.18.5.51. Trim air regulator valve


- - - -

A8.18.5.52. Trim air check valve


- - - -

A8.18.5.53. Trim air delta pressure sensor


- - - -

A8.18.5.54. Cockpit air temperature sensing ejector assembly


- - - -

A8.18.5.55. Temp sensor on cockpit air temp ejector assembly


- - - -

A8.18.5.56. Cockpit trim air valve


- - - -

A8.18.5.57. Cockpit zone inlet air temperature sensor


- - - -

A8.18.5.58. Cargo compt trim air valve


- - - -

A8.18.5.59. Cargo compt air temp sensing ejector assembly


- - - -

A8.18.5.60. Temp sensor on cargo compt air temp sensing ejector assembly


- - - -

A8.18.5.61. Cargo compt zone inlet air temp sensor


- - - -


142Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.18.5.62. Crew rest trim valve


- - - -

A8.18.5.63. Crew rest air temp sensing ejector assembly


- - - -

A8.18.5.64. Temp sensor on crew rest air temp ejector assembly


- - - -

A8.18.5.65. Crew rest zone inlet air temp sensor


- - - -



* - - - -


A8.18.6.1. Adjust ram air inlet scoop assembly


- - - -


A8.18.7.1. Conditioned air check valve


- - - -

A8.18.7.2. Conditioned air duct relief valve


- - - -



- - - -

A8.18.7.4. Environmental control panel assembly


* - - - -



- - - -

A8.18.7.6. Cargo compartment recirculation check valve


- - - -

A8.18.7.7. Cargo compartment circulation fan


- - - -

A8.18.7.8. Filter element for cargo compt circulation fan


- - - -

A8.18.7.9. Ground conditioned air check valve


- - - -

A8.18.7.10. Crew air shutoff valve


- - - -

A8.18.7.11. Manual globe air valve


- - - -

A8.18.7.12. Avionics cooling fan


- - - -


143Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.18.7.13. Avionics cooling fan check valve


- - - -

A8.18.7.14. Avionics cooling outflow valve


- - - -

A8.18.7.15. Augmentation valve


- - - -

A8.18.7.16. Cooling avionics heat exchanger bypass valve


- - - -

A8.18.7.17. Backup avionics outflow valve


- - - -

A8.18.7.18. Ground inlet shutoff valve


- - - -

A8.18.7.19. Avionics equipment inlet temperature sensors


- - - -

A8.18.7.20. Avionics cooling shutoff valve


- - - -

A8.18.7.21. Avionics flow sensor


- - - -

A8.18.7.22. Cargo compt ground ventilation Fan


- - - -



- - - -



- - - -

A8.18.7.25. Loadmaster station manual globe air valve


- - - -



- - - -

A8.18.7.27. Ram air vent valve actuator


- - - -



- - - -

A8.18.7.29. Ramp heater/blower


- - - -

A8.18.7.30. Ramp floor thermostat


- - - -

A8.18.7.31. Flow control valve


- - - -


144Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.18.7.32. Pack discharge thermostat


- - - -

A8.18.7.33. Water separator pack discharge temp sensor


- - - -

A8.18.7.34. Refrigeration unit


- - - -



- - - -

A8.18.7.36. Pack anti-ice valve


- - - -

A8.18.7.37. Turbine bypass valve


- - - -

A8.18.7.38. Air conditioning heat exchanger


- - - -

A8.18.7.39. Air cycle machine


- - - -

A8.18.7.40. Compressor discharge overtemp fusible plug on AMC


- - - -

A8.18.7.41. Turbine inlet overtemp fusible plug on ACM


- - - -

A8.18.7.42. Water injector nozzle


- - - -

A8.18.7.43. Water separator assembly


- - - -

A8.18.7.44. Coalescer bag on water separator


* - - - -

A8.18.7.45. Bypass valve on water separator


- - - -

A8.18.7.46. Pressure sensor on water separator


- - - -

A8.18.7.47. Ram air inlet scoop assembly


- - - -

A8.18.7.48. Linear ram air electro-mechanical actuator


- - - -

A8.18.7.49. Ram air exhaust valve assembly


- - - -

A8.18.7.50. Ram air inlet duct assembly


- - - -


145Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.18.7.51. Trim air regulator valve


- - - -

A8.18.7.52. Trim air check valve


- - - -

A8.18.7.53. Trim air delta pressure sensor


- - - -

A8.18.7.54. Cockpit air temperature sensing ejector assembly


- - - -

A8.18.7.55. Temp sensor on cockpit air temp ejector assembly


- - - -

A8.18.7.56. Cockpit trim air valve


- - - -

A8.18.7.57. Cockpit zone inlet air temperature sensor


- - - -

A8.18.7.58. Cargo compt trim air valve


- - - -

A8.18.7.59. Cargo compt air temp sensing ejector assembly


- - - -

A8.18.7.60. Temp sensor on cargo compt air temp sensing ejectorassembly


- - - -

A8.18.7.61. Cargo compt zone inlet air temp sensor


- - - -

A8.18.7.62. Crew rest trim valve


- - - -

A8.18.7.63. Crew rest air temp sensing ejector assembly


- - - -

A8.18.7.64. Temp sensor on crew rest air temp ejector assembly


- - - -

A8.18.7.65. Crew rest zone inlet air temp sensor


- - - -



* - - - -




A8.19.2 Operational check

A8.19.2.1. Pressurization system


*R - - - -


146Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.19.3. Troubleshoot System *R - - - -



A8.19.5.1. Automatic cabin pressure controller


* - - - -

A8.19.5.2. Cabin pressure outflow valve body


- - - -

A8.19.5.3. Cabin pressure selector panel


- - - -

A8.19.5.4. Cabin pressure transducer


- - - -

A8.19.5.5. Alternating current motor


- - - -

A8.19.5.6. Direct current motor


- - - -

A8.19.5.7. Cabin pressure indication panel assembly


- - - -

A8.19.5.8. Cabin pressure indicator


- - - -

A8.19.5.9. Cabin 10,000 foot pressure aneroid switch


- - - -

A8.19.5.10. Cabin positive press and temperature relief valve


- - - -



A8.19.7.1. Automatic cabin pressure controller


* - - - -

A8.19.7.2. Cabin pressure outflow valve body


- - - -

A8.19.7.3. Cabin pressure selector panel


- - - -

A8.19.7.4. Cabin pressure transducer


- - - -

A8.19.7.5. Alternating current motor


- - - -

A8.19.7.6. Direct current motor


- - - -

A8.19.7.7. Cabin pressure indication panel assembly - - - -


147Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




- - - -

A8.19.7.9. Cabin 10,000 foot pressure aneroid switch


- - - -

A8.19.7.10. Cabin positive press and temperature relief Valve


- - - -

A8.19.8. Bench check - - - -





A8.20.2.1. Panel-mounted diluter demand o2 regulator


* - - - -

A8.20.2.2. O2 quick don mask


- - - -

A8.20.2.3. Crew portable oxy cylinder recharger assembly


- - - -

A8.20.2.4. LOX converter


- - - -

A8.20.2.5. Emer sys pass sidewall seat and aeromed sw


- - - -

A8.20.2.6. Emer sys pass sidewall seat and manual mode


- - - -

A8.20.2.7. Halo therapeutic dial ind pressure gauge


- - - -

A8.20.2.8. LOX quantity indicator


- - - -

A8.20.2.9. Port O2 cylinder and regulator


- - - -

A8.20.2.10. Port O2 cylinder and regulator


- - - -

A8.20.2.11. Portable oxygen mask


- - - -


A8.20.3.1. Oxygen sys. using FI Manual

TR: 1C-17A-2-35FI-00-1

* - - - -



148Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.20.5.1. Liquid quantity indicator (totalizer)


- - - -

A8.20.5.2. Crew liquid oxygen converter


- - - -

A8.20.5.3. Crew relief valve


- - - -

A8.20.5.4. Crew liquid oxygen drain valve


- - - -

A8.20.5.5. Crew liquid oxygen fill valve


- - - -

A8.20.5.6. Crew oxygen heat exchanger


- - - -

A8.20.5.7. Crew oxygen check valve


- - - -

A8.20.5.8. Oxygen shutoff crossfeed valve


- - - -

A8.20.5.9. Panel mounted diluter demand oxygen regulator


* - - - -

A8.20.5.10. Lavatory demand barometric oxygen regulator valve


- - - -

A8.20.5.11. Crew liquid oxygen manual shutoff valve


- - - -

A8.20.5.12. Oxygen quick don mask


- - - -

A8.20.5.13. Lavatory emergency oxygen mask container assembly


- - - -

A8.20.5.14. Door hinge on lav emer o2 mask container assembly


- - - -

A8.20.5.15. Lav emer oxygen drop mask


- - - -

A8.20.5.16. Lav emergency oxygen mask manifold


- - - -

A8.20.5.17. Crew oxygen low pressure switch


- - - -

A8.20.5.18. Crew liquid oxygen quantity indicator


- - - -

A8.20.5.19. Crew portable oxy cylinder recharger assembly - - - -


149Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.20.5.20. Liquid oxygen converter


- - - -

A8.20.5.21. Liquid oxygen drain valve


- - - -

A8.20.5.22. Liquid oxygen fill valve


- - - -

A8.20.5.23. Liquid oxygen manual shutoff valve


- - - -

A8.20.5.24. Passenger oxygen heat exchanger


- - - -

A8.20.5.25. Oxygen check valve


- - - -

A8.20.5.26. 430 psi passenger oxygen relief valve


- - - -

A8.20.5.27. Passenger dial indicating-oxygen pressure gauge


- - - -

A8.20.5.28. Auxiliary oxygen heat exchanger


- - - -

A8.20.5.29. Aft loadmaster panel mounted diluter demand O2 reg


- - - -

A8.20.5.30. Centerline seat O2 supply hose on emer sys


- - - -

A8.20.5.31. Pass barometric demand regulator


- - - -

A8.20.5.32. Emergency oxygen mask container


- - - -

A8.20.5.33. Emer O2 mask container with switch


- - - -

A8.20.5.34. Litter emergency O2 mask container


- - - -

A8.20.5.35. Emergency oxygen manifold


- - - -

A8.20.5.36. 50 psi halo therapeutic regulator


- - - -

A8.20.5.37. Dial indicating-halo therapeutic pressure gauge


- - - -

A8.20.5.38. Emergency oxygen mask - - - -


150Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.20.5.39. Oxygen low pressure switch


- - - -

A8.20.5.40. Liquid oxygen quantity indicator


- - - -

A8.20.5.41. Pass O2 cyl port quick-disc recharger assembly


- - - -

A8.20.5.42. Portable O2 cylinder and regulator


- - - -

A8.20.5.43. Portable O2 mask


- - - -



A8.20.7.1. Liquid quantity indicator (totalizer)


- - - -

A8.20.7.2. Crew liquid oxygen converter


- - - -

A8.20.7.3. Crew relief valve


- - - -

A8.20.7.4. Crew liquid oxygen drain valve


- - - -

A8.20.7.5. Crew liquid oxygen fill valve


- - - -

A8.20.7.6. Crew oxygen heat exchanger


- - - -

A8.20.7.7. Crew oxygen check valve


- - - -

A8.20.7.8. Oxygen shutoff crossfeed valve


- - - -

A8.20.7.9. Panel mounted diluter demand oxygen regulator


* - - - -

A8.20.7.10. Lavatory demand barometric oxygen regulator valve


- - - -

A8.20.7.11. Crew liquid oxygen manual shutoff valve


- - - -

A8.20.7.12. Oxygen quick don mask


- - - -

A8.20.7.13. Lavatory emergency oxygen mask container assembly - - - -


151Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.20.7.14. Door hinge on lav emer o2 mask container assembly


- - - -

A8.20.7.15. Lav emer oxygen drop mask


- - - -

A8.20.7.16. Lav emergency oxygen mask manifold


- - - -

A8.20.7.17. Crew oxygen low pressure switch


- - - -

A8.20.7.18. Crew liquid oxygen quantity indicator


- - - -

A8.20.7.19. Crew portable oxy cylinder recharger assembly


- - - -

A8.20.7.20. Liquid oxygen converter


- - - -

A8.20.7.21. Liquid oxygen drain valve


- - - -

A8.20.7.22. Liquid oxygen fill valve


- - - -

A8.20.7.23. Liquid oxygen manual shutoff valve


- - - -

A8.20.7.24. Passenger oxygen heat exchanger


- - - -

A8.20.7.25. Oxygen check valve


- - - -

A8.20.7.26. 430 psi passenger oxygen relief valve


- - - -

A8.20.7.27. Passenger dial indicating-oxygen pressure gauge


- - - -

A8.20.7.28. Auxiliary oxygen heat exchanger


- - - -

A8.20.7.29. Aft loadmaster panel mounted diluter demand O2 reg


- - - -

A8.20.7.30. Centerline seat O2 supply hose on emer sys


- - - -

A8.20.7.31. Pass barometric demand regulator


- - - -

A8.20.7.32. Emergency oxygen mask container - - - -


152Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.20.7.33. Emer O2 mask container with switch


- - - -

A8.20.7.34. Litter emergency O2 mask container


- - - -

A8.20.7.35. Emergency oxygen manifold


- - - -

A8.20.7.36. 50 psi halo therapeutic regulator


- - - -

A8.20.7.37. Dial indicating-halo therapeutic pressure gauge


- - - -

A8.20.7.38. Emergency oxygen mask


- - - -

A8.20.7.39. Oxygen low pressure switch


- - - -

A8.20.7.40. Liquid oxygen quantity indicator


- - - -

A8.20.7.41. Pass O2 cyl port quick-disc recharger assembly


- - - -

A8.20.7.42. Portable O2 cylinder and regulator


- - - -

A8.20.7.43. Portable O2 mask


- - - -

A8.20.8. Bench check - - - -

A8.20.9. Drain LOX converter


- - - -

A8.20.10. Purge LOX converter


- - - -

A8.20.11. Repack Crew oxygen mask


- - - -

A8.20.12. Repack sidewall pass emergency O2 mask


* - - - -

A8.20.13. Service LOX


- - - -

A8.21. LIFE RAFT INFLATION EQUIPMENT

TR: Ref 14S series TO’s




153Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.21.2.1. Flotation equipment deployment system

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.2.2. Ramp escape blowdown

TR: 1C-C17A-2-95JG-30-1

- - - -


A8.21.3.1. Crew escape & safety sys using FI manual

TR: 1C-C17A-2-95FI-00-1

*R - - - -

A8.21.4. Inspect *R - - - -


A8.21.5.1. Fed arm control panel

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.2. Arm fire initiator

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.3. Retractor assembly

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.4. Shaped charge assembly

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.5. Shielded mild detonating cord

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.6. Shielded mild detonating cord union

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.7. 4 port manifold

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.8. Port manifold

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.5.9. Aft loadmaster ramp blowdown panel

TR: 1C-C17A-2-95JG-30-1

- - - -

A8.21.5.10. Forward loadmaster ramp blowdown panel

TR: 1C-C17A-2-95JG-30-1

- - - -

A8.21.5.11. Ramp emergency egress battery

TR: 1C-C17A-2-95JG-30-1

* - - - -

A8.21.5.12. Ramp door emergency exit sign

TR: 1C-C17A-2-95JG-30-1

- - - -



A8.21.7.1. Fed arm control panel

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.2. Arm fire initiator - - - -


154Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-C17A-2-95JG-20-1

A8.21.7.3. Retractor assembly

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.4. Shaped charge assembly

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.5. Shielded mild detonating cord

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.6. Shielded mild detonating cord union

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.7. 4 port manifold

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.8. Port manifold

TR: 1C-C17A-2-95JG-20-1

- - - -

A8.21.7.9. Aft loadmaster ramp blowdown panel

TR: 1C-C17A-2-95JG-30-1

- - - -

A8.21.7.10. Forward loadmaster ramp blowdown panel

TR: 1C-C17A-2-95JG-30-1

- - - -

A8.21.7.11. Ramp emergency egress battery

TR: 1C-C17A-2-95JG-30-1

* - - - -

A8.21.7.12. Ramp door emergency exit sign

TR: 1C-C17A-2-95JG-30-1

- - - -

A8.21.8. Bench check - - - -





A8.22.2.1. Hyd Pwr Sys


- - - -

A8.22.2.2. Hyd Pwr Main Sys


- - - -

A8.22.2.3. RAT System


- - - -

A8.22.2.4. Potable water sys

TR: 1C-C17A-2-38JG-10-1

- - - -

A8.22.2.5. Electric water heater

TR: 1C-C17A-2-38JG-10-1

- - - -

A8.22.2.6. Waste disposal sys

TR: 1C-C17A-2-38JG-30-1

- - - -


155Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.22.2.7. Potable water remote fault display sys

TR: 1C-C17A-2-40JG-20-1

- - - -

A8.22.2.8. Lighted nav chart holder


- - - -

A8.22.2.9. Galley module system


- - - -


A8.22.3.1. Hyd. sys using FI manual

TR: 1C-17A-2-29FI-00-1

*R - - - -

A8.22.3.2. Water/waste sys using FI manual

TR: 1C-C17A-2-38FI-00-1

* - - - -

A8.22.3.3. Potable water sys integration using FI manual

TR: 1C-C17A-2-40FI-00-1

* - - - -

A8.22.3.4. Equipment & furnishings using FI manual

TR: 1C-17A-2-25FI-00-1

*R - - - -



A8.22.5.1. Hyd sys pnl assembly


- - - -

A8.22.5.2. RAT uplock electro mech linear


- - - -

A8.22.5.3. Maintenance monitor panel

TR: 1C-C17A-2-40JG-20-1

- - - -

A8.22.5.4. Potable water service panel assembly

TR: 1C-C17A-2-38JG-10-1

- - - -


TR: 1C-C17A-2-38JG-10-1

- - - -

A8.22.5.6. Crew toilet pump & motor assembly

TR: 1C-C17A-2-38JG-30-1

- - - -

A8.22.5.7. Fan thrust reverser actuator proximity sensor

TR: 1C-C17A-2-78JG-30-1

- - - -



- - - -

A8.22.5.12. Lighted nav chart holder lens


- - - -

A8.22.5.13. Flt. checklist holder


- - - -

A8.22.5.14. Galley module hot cup timer - - - -


156Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.22.5.15. Lav shaver power supply


- - - -


A8.22.6.1. Pressure sys by replacing potable water press switch

TR: 1C-C17A-2-38JG-40-1

- - - -

A8.22.7 .Install components

A8.22.7.1. Hyd sys pnl assembly


- - - -

A8.22.7.2. RAT uplock electro mech linear


- - - -

A8.22.7.3. Maintenance monitor panel

TR: 1C-C17A-2-40JG-20-1

- - - -

A8.22.7.4. Potable water service panel assembly

TR: 1C-C17A-2-38JG-10-1

- - - -


TR: 1C-C17A-2-38JG-10-1

- - - -

A8.22.7.6. Crew toilet pump & motor assembly

TR: 1C-C17A-2-38JG-30-1

- - - -

A8.22.7.7. Fan thrust reverser actuator proximity sensor

TR: 1C-C17A-2-78JG-30-1

- - - -



- - - -

A8.22.7.12. Lighted nav chart holder lens


- - - -

A8.22.7.13. Flt. checklist holder


- - - -

A8.22.7.14. Galley module hot cup timer


- - - -

A8.22.7.15. Lav shaver power supply


- - - -

A8.22.8. Operate

A8.22.8.1. VHF system


- - - -

A8.22.8.2. UHF system


- - - -

A8.22.8.3. Cargo interphone system


- - - -


157Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A8.22.8.4. Maintenance interphone system


* - - - -

A8.22.8.5. Flight station interphone system


- - - -

A8.22.8.6. IRMS


- - - -

A8.22.8.7. Hyd sys controller


- - - -

A8.22.8.8. Aux hyd sys


- - - -

A8.22.8.9. Stow/deploy RAT assembly


- - - -

A8.22.8.10. MMP using maintenance monitor mode to view faults

TR: 1C-C17A-2-40JG-20-1

* - - - -

A8.22.8.11. MMP using maintenance monitor mode to view & erase faults

TR: 1C-C17A-2-40JG-20-1

* - - - -



A8.23.1. Inspect/operate portable external electrical power unit

- - - -

A8.23.2. Inspect/use ground maintenance stands - - - -

A8.23.3. Dropped Object Prevention Program (DOPP) - - - -

A8.23.4. Defensive Systems (DS) familiarization (on applicable aircraft)

- - - -

A8.23.5. Operate

A8.23.5.1.. Maint platform universal electric (scissors stand)

TR: 35A4-2-61-1

- - - -

A8.23.5.2. Platform servicing (Simmon)

TR: 35D34-31-1

- - - -

A8.23.5.3. Generator set, diesel (-86)

TR: 35C2-3-469-11

- - - -

A8.23.5.4. Air conditioner, diesel driven (MA-31)

TR: 35E9-9-61

- - - -

A8.23.5.5. Heater duct type, portable (diesel)

TR: 35E7-2-11-11

- - - -

A8.23.5.6. Floodlight set (NF-2)

TR: 35F5-5-11-61

- - - -

A8.23.5.7. Fuselage/wing access entry - - - -


158Attachment 8

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A8.23.5.8. Vert stab entry


- - - -

A8.23.5.9. Horizontal stab entry


- - - -

A8.23.5.10. Vert. stab exit


- - - -

A8.23.5.11. Underfloor maint. tunnel entry


- - - -

A8.23.5.12. Underfloor maint. tunnel exit


- - - -

A8.23.5.13. Power off underfloor maint. tunnel entry


- - - -

A8.23.5.14. Power off underfloor maint. tunnel exit


- - - -

A8.23.5.15. Connect/disconnect grnd a/c unit


- - - -

A8.23.5.16. Connect/disconnect ext. hyd. power


- - - -

A8.23.5.17. Connect/disconnect ext. pneumatic air


- - - -


159Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 9




NOTE 4: Address comments and recommended changes through Unit Training Managers to the MAJCOM Maintenance Training Manager @ HQAMC/LGMMT, 402 Scott Drive Unit 2A2, Scott AFB, IL 62225-5308; or call DSN 576-4787. MAJCOM Training and Functional Managers forward inputs tothe AETC Training Manager, DSN 736-2772.


TR: Applicable C-130 TOs, 8 series component TOs


A9.1.2. Operational check * - - - -


A9.1.3.1 AC Power System - - - -

A9.1.3.2 Bearing Fail System - - - -



A9.1.5.1. Generator control panel - - - -

A9.1.5.2. Voltage regulator - - - -

A9.1.5.3. Frequency-sensitive relay - - - -

A9.1.5.4. Inverter - - - -

A9.1.5.5. Bus tie contactor - - - -

A9.1.5.6. Generator control unit - - - -

A9.1.5.7. Bus switching system components - - - -

A9.1.5.8. Engine generator - - - -

A9.1.5.9. Other system components - - - -



A9.1.7.1. Generator control panel - - - -

A9.1.7.2. Voltage regulator - - - -

A9.1.7.3. Frequency-sensitive relay - - - -

A9.1.7.4. Inverter - - - -

A9.1.7.5. Bus tie contactor - - - -

A9.1.7.6. Generator control unit - - - -

A9.1.7.7. Bus switching system components - - - -

A9.1.7.8. Generator, engine - - - -


A9.1.8. Component location - - - -

A9.1.9. Bench check components - - - -


160Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC








A9.2.5.1. Transformer rectifier unit - - - -

A9.2.5.2. Reverse current relay - - - -

A9.2.5.3. Battery system components - - - -




A9.2.6.2. Reverse current relay - - - -

A9.2.6.3. Battery system components - - - -






A9.3.3. Apply external power - - - -





A9.3.6.2. External power contactor - - - -





A9.3.8.2. External power contactor - - - -




A9.4. APU/GTC POWER SYSTEM

TR: Applicable C-130 TO’s



161Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC







A9.5. AIR TURBINE SYSTEM (ATM)


A9.5.2. System Operational check - - - -

A9.5.2.1. Bus off warning operational check - - - -




A9.5.5.1. ATM assembly - - - -

A9.5.5.2. ATM/APU generator - - - -

A9.5.5.3. Shutoff valve - - - -

A9.5.5.4. Modulation valve - - - -

A9.5.5.5. Cooling fan - - - -

A9.5.5.6. Solenoid - - - -

A9.5.5.7. Filter - - - -


A9.5.5.9. Bus off warning relay - - - -



A9.5.7.1. ATM assembly - - - -

A9.5.7.2. ATM/APU generator - - - -


A9.5.7.4. Modulation valve - - - -

A9.5.7.5. Cooling fan - - - -

A9.5.7.6. Solenoid - - - -

A9.5.7.7. Filter - - - -


A9.5.7.9. Bus off warning relay - - - -

A9.5.7.10. Drain and service oil - - - -





162Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A9.6.2.1. External lighting * - - - -

A9.6.2.2. Internal lighting - - - -

A9.6.2.2.1. Flight-deck lighting - - - -

A9.6.2.2.2. Cargo compartment lighting - - - -

A9.6.2.2.3. Other internal lighting - - - -

A9.6.3. Troubleshoot Lighting Systems - - - -

A9.6.4. Inspect Lighting Systems * - - - -


A9.6.5.1. Loading light - - - -

A9.6.5.2. Instrument panel eyebrow light - - - -

A9.6.5.3. Wingtip light - - - -

A9.6.5.4. Variable AC light transformer - - - -

A9.6.5.5. DC light rheostat - - - -

A9.6.5.6. NVG Light Assemblies - - - -

A9.6.5.7. NVIS Receptacle - - - -

A9.6.5.8. NVG Transfer Unit - - - -

A9.6.5.9. NVG Lighting Control Box - - - -



A9.6.7.1. Loading light - - - -

A9.6.7.2. Instrument panel eyebrow light - - - -

A9.6.7.3. Wingtip light - - - -

A9.6.7.4. Variable AC light transformer - - - -

A9.6.7.5. DC light rheostat - - - -

A9.6.7.6. NVG Light Assemblies - - - -

A9.6.7.7. NVIS Receptacle - - - -

A9.6.7.8. NVG Transfer Unit - - - -

A9.6.7.9. NVG Lighting Control Box - - - -










163Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC








A9.8.5.1. Anti-skid control box * - - - -

A9.8.5.2. Wheel transducer - - - -



A9.8.7.1. Anti-skid control box * - - - -

A9.8.7.2. Wheel transducer - - - -






A9.9.2.1. Aileron/Rudder Trim - - - -

A9.9.2.2. Elevator Trim - - - -




A9.9.5.1. Elevator trim yoke switch - - - -

A9.9.5.2. Elevator trim selector switch - - - -

A9.9.5.3. Rudder/aileron trim switch - - - -



A9.9.6.1. Elevator trim yoke switch - - - -

A9.9.6.2. Elevator trim selector switch - - - -

A9.9.6.3. Rudder/aileron trim switch - - - -





A9.10.2. Operational check flaps - - - -


164Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.10.3. Troubleshoot flaps - - - -



A9.10.5.1. Flap assemetry brake switches - - - -

A9.10.5.2. Flap motor limit switches - - - -

A9.10.5.3. Flap motor warning switches - - - -

A9.10.5.4. Flap position warning switches - - - -



A9.10.7.1. Flap assemetry brake switches - - - -

A9.10.7.2. Flap motor limit switches - - - -

A9.10.7.3. Flap motor warning switches - - - -

A9.10.7.4. Flap position warning switches - - - -


TR: Applicable C-130 Tos, 8 series component TOs



A9.11.2.1. Engine overheat/fire warning * - - - -

A9.11.2.2. GTC/APU/overheat/fire warning * - - - -

A9.11.2.3. Nacelle overheat * - - - -

A9.11.2.4. Turbine overheat * - - - -


A9.11.3.1. Overheat/fire warning * - - - -

A9.11.3.2. Turbine overheat * - - - -

A9.11.3.3. Nacelle overheat * - - - -



A9.11.5.1. Thermostat - - - -

A9.11.5.2. Fire/Overheat loop - - - -

A9.11.5.3. Fire Warning Control Box - - - -

A9.11.5.4. Overheat detectors - - - -

A9.11.5.5. Turbine overheat wiring harness - - - -



A9.11.7.1. Thermostat - - - -

A9.11.7.2. Fire/Overheat loop - - - -

A9.11.7.3. Fire Warning Control Box - - - -


165Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.11.7.4. Overheat detectors - - - -

A9.11.7.5. Turbine overheat wiring harness - - - -






A9.12.3. Troubleshoot Systems - - - -



A9.12.5.1. Squib * - - - -

A9.12.5.2. Agent bottle - - - -

A9.12.5.3. Directional control valves - - - -

A9.12.5.4. System plumbing - - - -


A9.12.6.1. Squib - - - -

A9.12.6.2. Agent bottle - - - -

A9.12.6.3. Directional control valves - - - -

A9.12.6.4. System plumbing - - - -





A9.13.2. Operational check of Panel Assembly - - - -




A9.13.5.1 Dimmer Unit - - - -

A9.13.5.2 Control Box - - - -

A9.13.5.3 Light Assembly - - - -


A9.13.6.1 Dimmer Unit - - - -

A9.13.6.2 Control Box - - - -

A9.13.6.3 Light Assembly - - - -

A9.14. CARGO DOOR CONTROL AND WARNING SYSTEM

TR: Applicable C-130 TOs, 8 series component


166Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TOs



A9.14.2.1. Cargo Ramp/Door * - - - -

A9.14.2.2. ADS - - - -




A9.14.5.1. Ramp switch - - - -

A9.14.5.2. Door switch - - - -


A9.14.6.1. Ramp switch - - - -

A9.14.6.2. Door switch - - - -

A9.14.7. Adjust switches

A9.14.7.1. Ramp Switch - - - -

A9.14.7.2. Door Switch - - - -





A9.15.3. Auxiliary generator - - - -




A9.15.6.1. Starter control switch - - - -

A9.15.6.2. Throttle ignition switch - - - -

A9.15.6.3. Low speed ground idle switch - - - -


A9.15.7.1. Starter control switch - - - -

A9.15.7.2. Throttle ignition switch - - - -

A9.15.7.3. Low speed ground idle switch - - - -


TR: Applicable C-130 TOs; 8 series component TOs






167Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC









A9.17.3. Attach wire to taps on transformer * - - - -




A9.17.6.1. Power transformer - - - -

A9.17.6.2. NESA window leads and hardware - - - -


A9.17.7.1. Power transformer - - - -

A9.17.7.2. NESA window leads and hardware - - - -








A9.18.5.1. Engine shutoff valve - - - -

A9.18.5.2. Wing anti-ice valve - - - -

A9.18.5.3. Bleed air ducts and clamps - - - -

A9.18.5.4. Thermostat - - - -



A9.18.6.1. Engine shutoff valve - - - -

A9.18.6.2. Wing anti-ice valve - - - -

A9.18.6.3. Bleed air duct and clamp - - - -

A9.18.6.4. Thermostat - - - -


A9.18.7. Perform leakage checks * - - - -

A9.18.8. Perform bleed air decay check * - - - -


168Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.19. RADOME ANTI-ICING SYSTEM





A9.19.4. Troubleshoot Monitoring System - - - -



A9.19.6.1. Anti-ice valve - - - -

A9.19.6.2. Thermal-switches - - - -

A9.19.6.3. Anti-ice solenoid - - - -

A9.19.6.4. Anti-ice regulator - - - -

A9.19.6.5. Glycol tank components - - - -

A9.19.6.6. Monitor Indicators - - - -

A9.19.6.7. Pressure Transducer - - - -

A9.19.6.8. Resistance Temperature Detector - - - -


A9.19.7.1. Anti-ice valve - - - -

A9.19.7.2. Thermoswitches - - - -

A9.19.7.3. Radome anti-ice solenoid - - - -

A9.19.7.4. Radome anti-ice regulator - - - -

A9.19.7.5. Glycol tank components - - - -

A9.19.7.6. Monitor Indicators - - - -

A9.19.7.7. Pressure Transducer - - - -

A9.19.7.8. Resistance Temperature Detector - - - -

A9.19.8 Calibrate System - - - -

A9.20. WING AND EMPENNAGE ANTI-ICING SYSTEM

TR: Applicable C-130 TOs, 8 series components TOs




A9.20.4. Inspect System Component - - - -



A9.21. ICE DETECTION SYSTEM

TR: Applicable C-130 TOs, 8 series components


169Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TOs






A9.21.5.1. Ice detector - - - -

A9.21.5.2. Interpreter - - - -

A9.21.5.3. Propeller de-ice timer - - - -

A9.21.5.4. Other System Components - - - -


A9.21.6.1. Ice detector - - - -

A9.21.6.2. Interpreter - - - -

A9.21.6.3. Propeller de-ice timer - - - -

A9.21.5.4. Other System Components - - - -

A9.22. UNDERFLOOR HEAT SYSTEM

TR: Applicable C-130 TOs, 8 series components TOs







A9.22.5.2. Diverter valve - - - -

A9.22.5.3. Thermostat - - - -

A9.22.5.4. Recirculating fan - - - -

A.9.20.5.5 Other System Components - - - -



A9.22.6.2. Diverter valve - - - -

A9.22.6.3. Thermostat - - - -

A9.22.6.4. Recirculating fan - - - -

A.9.20.6.5 Other System Components - - - -






170Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC




A9.23.5.1. Flow control valve - - - -

A9.23.5.2. Diverter valve pressure controller - - - -

A9.23.5.3. Water separator sock * - - - -



A9.23.5.6. Water separator anti-ice valve - - - -

A9.23.5.7. Auxiliary vent valve - - - -



A9.23.5.10. Ram air duct - - - -

A9.23.5.11. Refrigeration unit - - - -

A9.23.5.12. Temperature control boxes - - - -

A.9.21.5.13 Other system components - - - -



A9.23.7.1. Flow control valve - - - -

A9.23.7.2. Diverter valve pressure controller - - - -

A9.23.7.3. Water separator sock * - - - -



A9.23.7.6. Water separator anti-ice valve - - - -

A9.23.7.7. Auxiliary vent valve - - - -



A9.23.7.10. Ram air duct - - - -

A9.23.7.11. Refrigeration unit - - - -

A9.23.7.12. Temperature control boxes - - - -

A.9.23.7.13 Other system components - - - -



A9.23.10. Service cooling turbine - - - -

A9.23.11. Adjust flight deck flow valve cabin assembly - - - -




171Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A9.24.2. Operational check *R - - - -


A9.24.3.1 Pressurization System * - - - -

A9.24.3.2 Overboard Vent System * - - - -



A9.24.5.1. Pressure controller - - - -



A9.24.5.4. Safety valve - - - -

A9.24.5.5. Overboard Vent outflow valve - - - -

A9.24.5.6. Overboard vent vacuum regulator - - - -

A9.24.5.7. Overboard Vent pneumatic relay - - - -

A9.24.5.8. Filters - - - -



A9.24.7.1. Pressure controller - - - -



A9.24.7.4. Safety valve - - - -

A9.24.7.5. Overboard Vent outflow valve - - - -

A9.24.7.6. Overboard vent vacuum regulator - - - -

A9.24.7.7. Overboard Vent pneumatic relay - - - -

A9.24.7.8. Filters - - - -


A9.24.9. Perform pressure decay check * - - - -

A9.25. LIQUID OXYGEN SYSTEM

TR: AFOSH standards; TOs 15X1-1, 42B5-1-2,42E1-1-1, Applicable C-130 TOs





A9.25.5. Purge system * - - - -


A9.25.6.1. Oxygen regulator * - - - -

A9.25.6.2. Converter - - - -


172Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A9.25.6.4. Shutoff drain valve - - - -

A9.25.6.5. Heat Exchanger - - - -



A9.25.7.2. Converter - - - -


A9.25.7.4. Shutoff drain valve - - - -

A9.25.7.5. Heat Exchanger - - - -

A9.25.8. Perform leak check * - - - -

A9.25.9. Clean components * - - - -



A9.26.1. Propeller feather electrical


A9.26.1.2. Troubleshoot System - - - -

A9.26.1.3. Inspect System Components - - - -

A9.26.1.4. Remove Feather button - - - -

A9.26.1.5. Install Feather button - - - -

A9.26.2. Static line retriever system


A9.26.2.2. Troubleshoot System - - - -

A9.26.2.3. Inspect System Components - - - -


A9.26.2.4.1. Static line current limiter - - - -

A9.26.2.4.2. Static line switches - - - -



A9.26.2.6.1. Static line current limiter - - - -

A9.26.2.6.2. Static line switches - - - -

A9.26.2.7 Bench Check Components - - - -

A9.26.3. Radar Wave guide SystemTR: Applicable Acft TO’s

A9.26.3.1. Perform System Pressure check - - - -

A9.26.3.2 Remove pressure regulator - - - -

A9.26.3.3 Install pressure regulator - - - -

A9.26.4 URRASI

TR: Applicable TO’s


173Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.26.4.1 Operational Fundamentals - - - -

A9.26.4.2 Operational Check - - - -

A9.26.4.3 Troubleshoot System - - - -


A9.26.4.5 Remove Components - - - -

A9.26.4.6 Install Components - - - -

A26.5. Aerial Refueling System


A9.26.5.1 Operational Fundamentals - - - -

A9.26.5.2 Operational Check - - - -

A9.26.5.3 Troubleshoot System - - - -


A9.26.5.5 Remove Components - - - -

A9.26.5.6 Install Components - - - -


TR:

A9.27.1 Dropped Object Program (DOPP) - - - -

A9.27.2 Defensive System (DS) familiarization (on applicable aircraft)

- - - -

A9.27.3 Team communications - - - -

A9.28. C-130 J Model Applicable Task


A9.28.1. AC POWER SYSTEM

A9.28.1.1. Operational Fundamentals - - - -

A9.28.1.2. Operational Check of AC Power System using Communication Navigation Identification Management Unit (CNI-MU)

- - - -

A9.28.2 Remove Components

A9.28.2.1 Overhead Electrical Control Panel - - - -

A9.28.2.2 Engine Generator Magnetic Indicator Plug - - - -

A9.28.2.3 Bulkhead Battery Panel Assembly - - - -

A9.28.3 Install Components

A9.28.3.1 Overhead Electrical Control Panel - - - -

A9.28.3.2 Engine Generator Magnetic Indicator Plug - - - -

A9.28.3.3 Bulkhead Battery Panel Assembly - - - -

A9.29 DC POWER SYSTEM

A9.29.1 Operational Fundamentals - - - -

A9.29.2 Remove components

A9.29.2.1 Low Voltage Power Supply (LVPS) - - - -


174Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.29.2.2 Power Panel Distribution Unit (PPDU) - - - -

A9.29.2.3 DC Power Diodes - - - -


A9.29.3.1 Low Voltage Power Supply (LVPS) - - - -

A9.29.3.2 Power Panel Distribution Unit (PPDU) - - - -

A9.29.3.3 DC Power Diodes - - - -

A9.29.4. Load Electronic C/B Unit (ECBU) Software * - - - -

A9.29.5. Perform ECBU IBIT * - - - -

A9.29.6. Manipulate ECB’s using AMU (Avionics Management Unit)

* - - - -

A9.29.7. Manipulate ECB’s using CNI-MU * - - - -

A9.29.8. Manipulate ECB’s using Portable Maintenance Aid (PMA)

- - - -

A9.30 EXTERNAL POWER SYSTEM


A9.30.2 Load Operational Maintenance Program (OMP) with external power

* - - - -

A9.30.3 Load Operational Maintenance Program (OMP) with battery power

- - - -

A9.31 APU POWER SYSTEM


A9.31.2 Operational check using CNI-MU - - - -

A9.32 LIGHTING SYSTEM


A9.32.2 Operate Copilots lighting using CNI-MU - - - -

A9.32.3 Operate Pilots lighting using CNI-MU - - - -

A9.32.4 Operate External lighting using CNI-MU - - - -

A9.32.5 Operate Lighting control using AMU and HDD - - - -

A9.32.6 Operational Check of Emergency Exit Lighting System

- - - -

A9.32.7 Remove Component

A9.32.7.1 Multi-Channel Dimming Unit(MCDU) - - - -

A9.32.7.2 Dome Light Dimming Unit (DLDU) - - - -

A9.32.7.3 Emergency Exit Light Inertia Switch - - - -

A9.32.7.4 Emergency Exit Light Batteries - - - -

A9.32.8 Install Component

A9.32.8.1 Multi-Channel Dimming Unit(MCDU) - - - -

A9.32.8.2 Dome Light Dimming Unit (DLDU) - - - -

A9.32.8.3 Emergency Exit Light Inertia Switch - - - -

A9.32.8.4 Emergency Exit Light Batteries - - - -


175Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.33 LANDING GEAR SYSTEM


A9.33.2 Operational Check using CNI-MU - - - -

A9.34 ANTI-SKID SYSTEM/WHEEL BRAKE SYSTEM



A9.34.3 Perform IBIT of system - - - -

A9.35 PRIMARY FLIGHT CONTROL SYSTEM


A9.35.2 Troubleshoot - - - -

A9.36 SECONDARY FLIGHT CONTROL SYSTEM


A9.36.2 Troubleshoot - - - -



A9.37.2 Operational Check of Fire Overheat Controller (FODS)

* - - - -

A9.37.3 Perform IBIT of FODS Controller - - - -

A9.38 SMOKE DETECTION SYSTEM


A9.38.2 Operational Check using AMU - - - -

A9.38.3 Remove Smoke Detector - - - -

A9.38.4 Install Smoke Detector - - - -

A.9.39 FIRE EXTINGUISHING SYSTEM

A.9.39.1 Operational Fundamentals - - - -

A9.40 SYSTEM INTEGRATION AND DISPLAY


A9.40.2 Operational Check of BAU (Type I or II) - - - -

A9.40.3 Remove Component

A9.40.3.1 Bus Adapter Unit (BAU) - - - -

A9.40.3.2 Bus Interface Unit (BIU) - - - -

A9.40.4 Install Component

A9.40.4.1 Bus Adapter Unit (BAU) - - - -

A9.40.4.2 Bus Interface Unit (BIU) - - - -

A9.41 CARGO DOOR CONTROLAND WARNING SYSTEM




176Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A9.42 BLEED AIR ENVIRONMENTAL CONTROL SYSTEM (BAECS)


A9.42.2 Operational Check of Bleed Air EnvironmentalController

- - - -

A9.42.3 Operational Check of Wing/Empennage Anti-ice System

- - - -

A9.42.4 Operate Bleed Air Valves using CNI-MU - - - -

A9.42.5 Perform IBIT of BAECS Anti-Ice System - - - -

A9.42.6 Remove

A9.42.6.1 BAECS CONTROLLER - - - -

A9.42.6.2 Pneumatic Controller - - - -

A9.42.6.3 Temperature Sensor - - - -

A9.42.6.4 Pressure Sensor - - - -

A9.42.7 Install

A9.42.7.1 BAECS CONTROLLER - - - -

A9.42.7.2 Pneumatic Controller - - - -

A9.42.7.3 Temperature Sensor - - - -

A9.42.7.4 Pressure Sensor - - - -

A9.43 ICE PROTECTION


A9.43.2 Operational check of De-Ice Boot - - - -

A9.43.3 Calibrate De-ice Timer Unit (DITU) - - - -

A9.43.4 Operate Ice Protection System using CNI-MU (NESA, WING/EMP, PROP)

- - - -

A9.44 AIR CONDITIONING SYSTEM



A9.45 PRESSURIZATION


A9.45.2 Operational Check using CNI-MU * - - - -


A9.45.3.1. Pressurization Control Panel - - - -

A9.45.3.2. Cabin Pressure Controller - - - -

A9.45.3.3. Outflow Valve Servo - - - -

A9.45.3.4. Cabin Pressure Transducer - - - -

A.9.45.4. Install Components

A.9.45.4.1. Pressurization Control Panel - - - -

A.9.45.4.2. Cabin Pressure Controller - - - -


177Attachment 9

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A.9.45.4.3. Outflow Valve Servo - - - -

A.9.45.4.4. Cabin Pressure Transducer - - - -

A.9.45.5. Cabin Pressure Controller IBIT - - - -

A9.46 COMMON MAINTENACE PRACTICES

A9.46.1 Access maintenance messages using AMU/HDD * - - - -

A9.46.2 Operate Portable Maintenance Aid (PMA) * - - - -

A9.46.3 Interpret Fault Isolation codes using Ground Maintenance System (GMS)

* - - - -

A9.46.4 Perform Data Bus Test Points (DBTP) using PMA * - - - -

A9.46.5 Removal and Installation Fundamentals

A9.46.5.1 Type 1 Line Replaceable Units - - - -





A.9.46.6 ENHANCED CARGO HANDLING SYSTEM

A.9.46.6.1. Operational Fundamentals - - - -

A.9.46.6.2. Operational Check of ECHS - - - -

A.9.46.7. Remove Component

A.9.46.7.1. Pallet Lock Control Unit (PLCU) - - - -

A.9.46.7.2. Multi-Function Color Display (MFCD) - - - -

A.9.46.8. Install Component

A.9.46.8.1. Pallet Lock Control Unit (PLCU) - - - -

A.9.46.8.2. Multi-Function Color Display (MFCD) - - - -


178Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 10




NOTE 4: Address comments and recommended changes through Unit Training Managers to the MAJCOM Maintenance Training Manager @ HQ AMC/LGMMT, 40Drive Unit 2A2, Scott AFB, IL 62225-5308; or call DSN 576-4787. MAJCOM Training and Functional Managers forward inputs to the AETC Training Manager,

DSN 736-2772.


TR: Applicable 33 series TOs

A10.1.1. Use ECS tester - - - -






A10.2.4. Inspect * - - - -


A10.2.5.1. Generator control unit * - - - -

A10.2.5.2. Load controller * - - - -

A10.2.5.3. Bus tie contactor * - - - -

A10.2.5.4. Bus off indication relay * - - - -




A10.2.7.1. Generator control unit * - - - -

A10.2.7.2. Load controller * - - - -

A10.2.7.3. Bus tie contactor * - - - -

A10.2.7.4. Bus off indication relay * - - - -









A10.3.4. Inspect - - - -



179Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A10.3.5.1. Transformer rectifer * - - - -

A10.3.5.2. Battery relay * - - - -

A10.3.5.3. Other system componetns - - - -



A10.3.7.1. Transformer rectifer * - - - -

A10.3.7.2. Battery relay * - - - -










A10.4.5. Inspect - - - -


A10.4.6.1. Bus protection panel * - - - -




A10.4.8.1. Bus protection panel * - - - -








A10.5.2.1. External - - - -

A10.5.2.2. Internal - - - -

A10.5.2.2.1. Cargo dome lights - - - -

A10.5.2.2.2. Other internal lighting systems - - - -


A10.5.4. Inspect - - - -



180Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A10.5.5.1. External strobe light power supply * - - - -

A10.5.5.2. Autotransformer * - - - -




A10.5.7.1. External strobe light power supply * - - - -

A10.5.7.2. Autotransformer * - - - -









A10.6.3. Troubleshoot * - - - -

A10.6.4. Inspect - - - -


A10.6.5.1. Up limit switch * - - - -




A10.6.7.1. Up limit switch * - - - -









A10.7.4. Inspect - - - -


A10.7.5.1. Anti-skid box * - - - -

A10.7.5.2. Anti-skid detector * - - - -




181Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A10.7.7.1. Anti-skid box * - - - -









A10.8.2.1 Trim systems - - - -

A10.8.2.2. Aileron tab operable - - - -


A10.8.4. Inspect - - - -










A10.9.2.1. Flaps - - - -

A10.9.2.2. Pitch trim - - - -

A10.9.2.3. Test ground spoiler reject take-off (RTOmode) - - - -


A10.9.4. Inspect - - - -


A10.9.5.1. Flap transmitter - - - -




A10.9.7.1. Flap transmitter - - - -


A10.9.8. Null flap transmitters - - - -



182Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC






A10.10.2.1. Engine - - - -

A10.10.2.2. Auxiliary Power Unit * - - - -


A10.10.4. Inspect - - - -


A10.10.5.1. Engine fire control box * - - - -

A10.10.5.2. Engine fire loop * - - - -




A10.10.7.1. Engine fire control box * - - - -

A10.10.7.2. Engine fire loop * - - - -









A10.11.4. Inspect - - - -


A10.11.5.1. Squib * - - - -




A10.11.7.1. Squib * - - - -




- - - -

- - - -


183Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC






A10.12.4. Inspect - - - -


A10.12.5.1. Touchdown relay #9 - - - -




A10.12.7.1. Touchdown relay #9 - - - -









A10.13.4. Inspect - - - -











A10.14.4. Inspect - - - -






184Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A10.15. CARGO DOOR CONTROL AND WARNING SYSTEM





A10.15.4. Inspect - - - -











A10.16.3.1. Jet engine - - - -

A10.16.3.2. Auxiliary power unit - - - -

A10.16.4. Inspect - - - -











A10.17.4. Inspect - - - -


A10.17.5.1. Transformer - - - -




185Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A10.17.7.1. Transformer - - - -








A10.18.3. Bleed down check - - - -

A10.18.4. Perform leakage check - - - -


A10.18.6. Inspect - - - -


A10.18.7.1. Engine bleed air shutoff valve * - - - -




A10.18.9.1. Engine bleed air shutoff valve * - - - -







A10.19.2. Subsystem fundamentals


A10.19.2.2. Anti-icing system - - - -

A10.19.2.3. Floor heat system - - - -

A10.19.2.4. Equipment cooling system - - - -




A10.19.6. Inspect - - - -





186Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A10.19.9.1. Water separator coalescer - - - -









A10.20.4. Inspect - - - -

A10.20.5. Remove components * - - - -


A10.20.7. Install components * - - - -




TR: AFOSH standards; TOs 15X1-1, 42B5-1-2, 42E1-1-1, Applicable C-141 Tos




A10.21.4. Inspect * - - - -

A10.21.5. Purge system * - - - -


A10.21.6.1. Oxygen regulator - - - -






A10.21.9. Perform leak check - - - -

A10.21.10. Clean components - - - -

A10.21.11. Procedures for cleaning components - - - -



A10.22. LIFE RAFT INFLATION SYSTEM


187Attachment 10

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC





A10.22.4. Inspect - - - -






F-15 TRAINING REQUIREMENTSSTS 2A6X6, October 2002

188Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

Attachment 11

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 5 will be performed by personnel assigned to maintain F-15 aircraft.





TR: Applicable F-15 TOs, 8 series component TOs



A11.1.2.1. Main Generator System * - - - -

A11.1.2.2. Emergency Power System - - - -


A11.1.3.1. Main Generator System - - - -

A11.1.3.2. Emergency Power System - - - -



A11.2.5.1. IDG * - - - -

A11.2.5.2. GCU * - - - -

A11.2.5.3. Power contactor * - - - -

A11.2.5.4. IDG Filters - - - -

A11.2.5.5. Relay Panels - - - -

A11.2.5.6. Circuit Breaker Panels - - - -


A11.2.6.1. Generator - - - -

A11.2.6.2. CSD - - - -

A11.2.6.3. Assemble IDG - - - -

A11.2.6.4. Disassemble IDG - - - -

A11.2.6.5. Relay Panels - - - -



A11.2.7.1. IDG * - - - -

A11.2.7.2. GCU * - - - -

A11.2.7.3. Power contactor * - - - -

A11.2.7.4. IDG Filters - - - -

A11.2.7.5. Relay Panels - - - -





189Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.2.9.1. Generator - - - -

A11.2.9.2. CSD - - - -

A11.2.9.3. Relay Panels - - - -


A11.2.10 Service IDG * - - - -








A11.3.5.1. DC Power Contactor - - - -



A11.3.5.4. Relay Panels - - - -



A11.3.6.2. Relay Panels - - - -


A11.3.7.1. DC Power Contactor - - - -



A11.3.7.4. Relay Panels - - - -



A11.3.8.2. Relay Panels - - - -










A11.4.6.2. External Power Monitor - - - -



190Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A11.4.7.2. External Power Monitor - - - -





A11.5.1.1. Exterior - - - -

A11.5.1.2. Interior - - - -

A11.5.1.3. Emergency - - - -


A11.5.2.1. Exterior * - - - -

A11.5.2.2. Interior * - - - -

A11.5.2.3. Emergency * - - - -


A11.5.3.1. Exterior - - - -

A11.5.3.2. Interior - - - -

A11.5.3.3. Emergency - - - -


A11.5.4.1 Exterior * - - - -

A11.5.4.2 Interior * - - - -

A11.5.4.3 Emergency * - - - -

A11.5.5. Remove components *

A11.5.5.1. Position Lights - - - -

A11.5.5.2. Anti-Collision Lights * - - - -

A11.5.5.3. Formation Lights - - - -

A11.5.5.4. Tail Flood Lights - - - -

A11.5.5.5. IFR Flood Light - - - -

A11.5.5.6. IFR Slipway Lights - - - -

A11.5.5.7. Flasher assembly - - - -

A11.5.5.8. Lighting Control Panel * - - - -

A11.5.5.9. Lights Trim Panel * - - - -

A11.5.5.10. Light Assemblies - - - -

A11.5.5.11. Power Supply - - - -

A11.5.5.12. Map Light * - - - -

A11.5.5.13. Flood Lights - - - -




191Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.5.6.2. Anti-Collision Lights - - - -

A11.5.6.3. Taxi Light - - - -

A11.5.6.4. Landing Light - - - -


A11.5.6.6. Lighting Control Panel - - - -

A11.5.6.7. Lights Trim Panel - - - -


A11.5.6.9. Power Supply - - - -

A11.5.6.10. Map Light - - - -



A11.5.7.2. Anti-Collision Lights * - - - -

A11.5.7.3. Formation Lights - - - -

A11.5.7.4. Tail Flood Lights - - - -


A11.5.7.6. IFR Slipway Lights - - - -

A11.5.7.7. Flasher assembly - - - -

A11.5.7.8. Lighting Control Panel * - - - -

A11.5.7.9. Lights Trim Panel * - - - -


A11.5.7.11. Power Supply - - - -

A11.5.7.12. Map Light * - - - -

A11.5.7.13. Flood Lights - - - -

A11.5.8. Component location

A11.5.8.1. Exterior - - - -

A11.5.8.2. Interior - - - -

A11.5.8.3. Emergency - - - -



A11.5.9.2. Anti-Collision Lights - - - -

A11.5.9.3 Taxi Light - - - -

A11.5.9.4. Landing Light - - - -


A11.5.9.6. Lighting Control Panel - - - -

A11.5.9.7. Lights Trim Panel - - - -


A11.5.9.9. Power Supply - - - -

A11.5.9.10. Map Light - - - -


192Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC








A11.6.5.1. Landing Gear Control Handle * - - - -

A11.6.5.2. Control Switches - - - -


A11.6.6.1. Landing Gear Control Handle * - - - -

A11.6.6.2. Control Switches - - - -


A11.6.8. Adjust switches - - - -

A11.7. ARRESTING HOOK INDICATION AND WARNING SYSTEM







A11.7.5.1. Control switches - - - -

A11.7.5.1. Uplimit switches - - - -

A11.7.5.1. Safety interlock switches - - - -


A11.7.6.1. Control switches - - - -

A11.7.6.2. Uplimit switches - - - -

A11.7.6.3. Safety interlock switches - - - -


A11.8. CANOPY INDICATION AND WARNING SYSTEM







A11.8.5.1. Canopy position switch - - - -


193Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.8.5.2. Canopy lock position switch - - - -

A11.8.5.3. Warning lights - - - -


A11.8.6.1. Canopy position switch - - - -

A11.8.6.2. Canopy lock position switch - - - -

A11.8.6.3. Warning lights - - - -









A11.9.5.1. Control Box * - - - -

A11.9.5.2. Control Panel - - - -

A11.9.5.3. Brake Pulsar Unit - - - -

A11.9.5.4. Transducer - - - -

A11.9.6. Repair control panel - - - -


A11.9.7.1. Control Box * - - - -

A11.9.7.2. Control Panel - - - -

A11.9.7.3. Brake Pulsar Unit - - - -

A11.9.7.4. Transducer - - - -


A11.9.9. Bench check control panel - - - -

A11.10. BRAKE HOLDING SYSTEM



A11.10.2. Operational Check * - - - -



A11.10.5. Remove Brake Hold Switch * - - - -

A11.10.6. Repair Throttle Quadrant - - - -

A11.10.7. Install Brake Hold Switch * - - - -


A11.10.9. Bench check throttle quadrant - - - -

A11.11. NOSE GEAR STEERING SYSTEM


194Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC






A11.11.5. Remove range limit switch - - - -

A11.11.6. Install range limit switch - - - -






A11.12.2.1. Flaps - - - -

A11.12.2.2. Speed brake - - - -


A11.12.3.1. Flaps - - - -

A11.12.3.2. Speed brake - - - -


A11.12.5. Remove flap airspeed switch - - - -

A11.12.6. Install flap airspeed switch - - - -





A11.13.1.1. Engine - - - -

A11.13.1.2. Bleed Air Leak Detection - - - -


A11.13.2.1. Engine * - - - -

A11.13.2.2. Bleed Air Leak Detection * - - - -


A11.13.3.1. Engine - - - -

A11.13.3.2. Bleed Air Leak Detection - - - -



A11.13.5.1. Sensing Elements * - - - -

A11.13.5.2. Control Box - - - -

A11.13.5.3. Control Panel - - - -



195Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.13.6.1. Control Box - - - -

A11.13.6.2. Control Panel - - - -


A11.13.7.1. Sensing Elements * - - - -

A11.13.7.2. Control Box - - - -

A11.13.7.3. Control Panel - - - -


A11.13.8.1. Control Box - - - -

A11.13.8.2. Control Panel - - - -








A11.14.5.1. Squib * - - - -

A11.14.5.2. Fire bottle - - - -


A11.14.6.1. Squib * - - - -

A11.14.6.2. Fire bottle - - - -









A11.15.5.1. Master Caution Light Assembly - - - -

A11.15.5.2. Warning Lights Assembly - - - -


A11.15.6.1. Master Caution Light Assembly - - - -

A11.15.6.2. Warning Lights Assembly - - - -






196Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A11.16.5. Remove fuel system ground preflight test panel - - - -

A11.16.6. Repair fuel system ground preflight test panel - - - -

A11.16.7. Install fuel system ground preflight test panel - - - -


A11.16.9. Bench check fuel system ground preflight test panel - - - -






A11.17.4. Inspect wiring - - - -









A11.18.5.1. Backup valve * - - - -

A11.18.5.2. Final stage valve * - - - -

A11.18.5.3. Final stage valve solonoid - - - -

A11.18.5.4. Final stage valve filter - - - -

A11.18.5.5. Ejector valve - - - -

A11.18.5.6. Bypass valve - - - -

A11.18.5.7. Sensors - - - -

A11.18.5.8. Ducts - - - -

A11.18.5.9. Tubing - - - -

A11.18.6. Repair bypass valve - - - -


A11.18.7.1. Backup valve * - - - -

A11.18.7.2. Final stage valve * - - - -

A11.18.7.3. Final stage valve solonoid - - - -

A11.18.7.4. Final stage valve filter - - - -

A11.18.7.5. Ejector valve - - - -

A11.18.7.6. Bypass valve - - - -


197Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.18.7.7. Sensors - - - -

A11.18.7.8. Ducts - - - -

A11.18.7.9. Tubing - - - -






A11.19.1.1. High pressure air conditioning system - - - -

A11.19.1.2. Air cycle air conditioning system - - - -

A11.19.1.3. Cabin temperature control - - - -

A11.19.1.4. Avionics temperature control - - - -

A11.19.1.5. Low pressure air conditioning system - - - -

A11.19.2. Subsystem Fundamentals




A11.19.3.1. Air conditioning systems * - - - -

A11.19.3.2. Cabin Temperature Control - - - -

A11.19.3.3. Avionics Temperature Control - - - -




A11.19.4.1. Air conditioning systems * - - - -

A11.19.4.2. Cabin Temperature Control - - - -

A11.19.4.3. Avionics Temperature Control - - - -





A11.19.6.1. Condenser/Liquid Coolant Heat Exchanger - - - -

A11.19.6.2. High pressure water separator modulating valve - - - -

A11.19.6.3. Regenerative heat exchanger - - - -

A11.19.6.4. Regenerative heat exchanger modulating valve - - - -

A11.19.6.5. Reheater heat exchanger - - - -



A11.19.6.8. Secondary heat exchanger ejector valve - - - -


198Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.19.6.9. Secondary heat exchanger ejector - - - -

A11.19.6.10. Fuel pressurization heat exchanger - - - -

A11.19.6.11. Turbine/Compressor - - - -

A11.19.6.12. Turbine compressor bypass valve - - - -

A11.19.6.13. Turbine compressor modulating bypass valve - - - -

A11.19.6.14. Turbine compressor modulating shutoff valve * - - - -

A11.19.6.15. Water extractor/separator - - - -

A11.19.6.16. Anti fog heat exchanger - - - -

A11.19.6.17. Anti fog modulating valve - - - -

A11.19.6.18. Anti ice valve - - - -

A11.19.6.19. Check valve - - - -

A11.19.6.20. Cabin air circuit controller - - - -

A11.19.6.21. Cabin hot air valve - - - -

A11.19.6.22. Cabin inlet modulating/shutoff valve - - - -

A11.19.6.23. Cabin ram air valve - - - -

A11.19.6.24. Cabin ram air valve limit switch - - - -

A11.19.6.25. Cabin water separator - - - -

A11.19.6.26. Air conditioning control panel - - - -

A11.19.6.27. Avionics air circuit controller - - - -

A11.19.6.28. Avionics equipment hot air valve - - - -

A11.19.6.29. Avionics cold air modulating valve - - - -

A11.19.6.30. Avionics cooling monitor unit - - - -

A11.19.6.31. Avionics flow control modulating valve - - - -

A11.19.6.32. Displays cooling differential pressure switch - - - -

A11.19.6.33. ICMS cooling control valve - - - -

A11.19.6.34. Sensors - - - -

A11.19.6.35. Ducting - - - -

A11.19.6.36. Anti-G valve - - - -

A11.19.7. Repair air conditioning control panel - - - -


A11.19.8.1. Condenser/Liquid Coolant Heat Exchanger - - - -

A11.19.8.2. High pressure water separator modulating valve - - - -


A11.19.8.4. Regenerative heat exchanger modulating valve - - - -

A11.19.8.5. Reheater heat exchanger - - - -



A11.19.8.8. Secondary heat exchanger ejector valve - - - -


199Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.19.8.9. Secondary heat exchanger ejector - - - -

A11.19.8.10. Fuel pressurization heat exchanger - - - -

A11.19.8.11. Turbine/Compressor - - - -

A11.19.8.12. Turbine compressor bypass valve - - - -

A11.19.8.13. Turbine compressor modulating bypass valve - - - -

A11.19.8.14. Turbine compressor modulating shutoff valve * - - - -

A11.19.8.15. Water extractor/separator - - - -

A11.19.8.16. Anti fog heat exchanger - - - -

A11.19.8.17. Anti fog modulating valve - - - -

A11.19.8.18. Anti ice valve - - - -

A11.19.8.19. Check valve - - - -

A11.19.8.20. Cabin air circuit controller - - - -

A11.19.8.21. Cabin hot air valve - - - -

A11.19.8.22. Cabin inlet modulating/shutoff valve - - - -

A11.19.8.23. Cabin ram air valve - - - -

A11.19.8.24. Cabin ram air valve limit switch - - - -

A11.19.8.25. Cabin water separator - - - -


A11.19.8.27. Avionics air circuit controller - - - -

A11.19.8.28. Avionics equipment hot air valve - - - -

A11.19.8.29. Avionics cold air modulating valve - - - -

A11.19.8.30. Avionics cooling monitor unit - - - -

A11.19.8.31. Avionics flow control modulating valve - - - -

A11.19.8.32. Displays cooling differential pressure switch - - - -

A11.19.8.33. ICMS cooling control valve - - - -

A11.19.8.34. Sensors - - - -

A11.19.8.35. Ducting - - - -

A11.19.8.36. Anti-G valve - - - -


A11.19.10. Service turbine - - - -

A11.19.11. Bench check air conditioning control panel - - - -




A11.20.1.1. Aircraft pressurization system - - - -

A11.20.1.2. Canopy seal pressurization system - - - -


A11.20.2.1. Aircraft Pressurization system * - - - -


200Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A11.20.3.1. Aircraft pressurization system * - - - -




A11.20.5.1. Safety valve - - - -


A11.20.5.3. Canopy seal - - - -

A11.20.5.4. Canopy seal pressure regulator - - - -


A11.20.6.1. Safety valve - - - -


A11.20.6.3. Canopy seal - - - -

A11.20.6.4. Canopy seal pressure regulator - - - -






A11.21.4. Remove LCS pump - - - -

A11.21.5. Install LCS pump - - - -


A11.21.7. Service - - - -


TR: AFOSH standards; TOs 15X1-1, 42B5-1-2,42E1-1-1, Applicable F-15 TOs, 8 seriescomponent TOs





A11.22.5. Purge

A11.22.5.1. System * - - - -

A11.22.5.2. Converter * - - - -


A11.22.6.1. Converter * - - - -

A11.22.6.2. Oxygen gauge * - - - -



201Attachment 11

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A11.22.7. Repair Converter - - - -


A11.22.8.1. Converter * - - - -

A11.22.8.2. Oxygen gauge * - - - -


A11.22.9. Perform leak check * - - - -

A11.22.10. Clean components and tools * - - - -

A11.22.11. Drain Converter - - - -

A11.22.12.. Service Converter - - - -

A11.23. Molecular Seive Oxygen Generating System







A11.23.5.1. Concentrator * - - - -

A11.23.5.2. Oxygen Regulator * - - - -

A11.23.5.3. Tubing - - - -

A11.23.5.4. Bit Panel - - - -


A11.23.6.1. Concentrator * - - - -

A11.23.6.2. Oxygen Regulator * - - - -

A11.23.6.3. Tubing - - - -

A11.23.6.4. Bit Panel - - - -


202Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 12

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 4 will be performed by assigned to maintain F-16 aircraft





TR: Applicable 33 series TOs

A12.1.1. Use ECS tester - - - -

A12.1.2. Use sonic leak detector - - - -

A12.1.3. Use cockpit cabin pressure leakage tester - - - -

A12.1.4. Use anti-skid tester - - - -

A12.1.5. Use bonding meter - - - -

A12.1.6. Use USM-128 - - - -

A12.1.7. Use EPU maintenance test set - - - -

A12.1.8. Use Enhanced Diagnostics Unit (EDNA) - - - -

A12.1.9. Use Oxygen Regulator Tester - - - -

A12.2. AIR CONDITIONING SYSTEM, COMPRESSION

TR: Applicable F-16 TOs, 8 series and 15 series component TOs




A12.2.4. Inspect - - - -


A12.2.5.1. Low stage valve - - - -

A12.2.5.2. High stage valve - - - -

A12.2.5.3. Bleed air check valve - - - -

A12.2.5.4. VAPR - - - -

A12.2.5.5. Environmental Control Sensor - - - -

A12.2.5.6. Servo Air Filter Element - - - -


A12.2.6. Repair Components - - - -


A12.2.7.1. Low stage valve - - - -

A12.2.7.2. High stage valve - - - -

A12.2.7.3. Bleed air check valve - - - -

A12.2.7.4. VAPR - - - -

A12.2.7.5. Environmental Control Sensor - - - -


203Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A12.2.7.6. Servo air filter element - - - -


A12.2.8. Perform Leak Checks - - - -


A12.3. AIR CONDITIONING SYSTEM, DISTRIBUTION

TR: Applicable F-16 Tos




A12.3.4. Inspect - - - -

A12.3.5 Remove Components

A12.3.5.1. Electronic Equipment sensors controller - - - -

A12.3.5.2. Priority Valve - - - -

A12.3.5.3. Electronic cooling mod valve - - - -

A12.3.5.4. Cold air shutoff drive valve - - - -

A12.3.5.5. Radar cooling shutoff valve - - - -



A12.3.6.1. Electronic Equipment sensors controller - - - -

A12.3.6.2. Priority Valve - - - -

A12.3.6.3. Electronic cooling mod valve - - - -

A12.3.6.4. Cold air shutoff drive valve - - - -

A12.3.6.5. Radar cooling shutoff valve - - - -




A12.4. AIR CONDITIONING SYSTEM, PRESSURIZATION

TR: Applicable F-16 TOs, 15 series component Tos


A12.4.1.1. Aircraft Pressurization System - - - -

A12.4.1.2. Canopy Seal Pressurization System - - - -

A12.4.1.3. Anti-G Suit System - - - -

A12.4.2. Operational Check

A12.4.2.1. Pressurization system - - - -

A12.4.2.2. Seal System - - - -

A12.4.2.3. Anti-G - - - -



204Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A12.4.4. Inspect - - - -


A12.4.5.1. Canopy Seal Filter Element - - - -


A12.4.5.3. Anti-G valve - - - -

A12.4.5.4. Cabin pressure regulator - - - -

A12.4.5.5. Cabin pressure relief and dump valve - - - -


A12.4.6. Repair Components - - - -


A12.4.7.1. Canopy Seal Filter Element - - - -


A12.4.7.3. Anti-G valve - - - -

A12.4.7.4. Cabin pressure regulator - - - -

A12.4.7.5. Cabin pressure relief and dump valve - - - -


A12.4.8. Perform Leakage checks - - - -



A12.5. AIR CONDITIONING SYSTEM, COOLING

TR: Applicable F-16 TOs




A12.5.4. Inspect - - - -


A12.5.5.1. Water Separator Coalescer - - - -

A12.5.5.2. Cooling Air Turbine compressor - - - -


A12.5.5.4. Primary and secondary heat exchanger - - - -

A12.5.5.5. Water separator anti-ice modulating valve - - - -

A12.5.5.6. Hot air sensor controller - - - -

A12.5.5.7. Hot air control valve - - - -

A12.5.5.8. Other Components - - - -



A12.5.7.1. Water Separator Coalescer - - - -


205Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A12.5.7.2. Cooling Air Turbine compressor - - - -


A12.5.7.4. Primary and secondary heat exchanger - - - -

A12.5.7.5. Water separator anti-ice modulating valve - - - -

A12.5.7.6. Hot air sensor controller - - - -

A12.5.7.7. Hot air control valve - - - -

A12.5.7.8. Other Components - - - -

A12.5.8. Perform Leakage checks - - - -


A12.6. AIR CONDITIONING SYSTEM, TEMPERATURECONTROL





A12.6.4. Inspect - - - -


A12.6.5.1. Cabin temperature sensor/controller - - - -

A12.6.5.2. Cabin temperature control valve - - - -


A12.6.5.4. Cabin temperature sensor fan - - - -

A12.6.5.5. Cabin temperature sensor - - - -

A12.6.5.6. Defog switches - - - -




A12.6.7.1. Cabin temperature sensor/controller - - - -

A12.6.7.2. Cabin temperature control valve - - - -


A12.6.7.4. Cabin temperature sensor fan - - - -

A12.6.7.5. Cabin temperature sensor - - - -

A12.6.7.6. Defog switches - - - -

A12.6.7.7 Other system components - - - -



A12.7. AC ELECTRICAL POWER SYSTEM

TR: Applicable F-16 TOs, 8 series and 16 series component TOs



206Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A12.7.4. Inspect - - - -


A12.7.5.1. CSD/GEN - - - -

A12.7.5.2. Main GCU - - - -

A12.7.5.3. Standby Generator - - - -

A12.7.5.4. Standby GCU - - - -

A12.7.5.5. Standby generator converter - - - -

A12.7.5.6. Overcurrent protection panels - - - -

A12.7.5.7. Main bus power contactors - - - -




A12.7.7.1. CSD/GEN - - - -

A12.7.7.2. Main GCU - - - -

A12.7.7.3. Standby Generator - - - -

A12.7.7.4. Standby GCU - - - -

A12.7.7.5. Standby generator converter - - - -

A12.7.7.6. Overcurrent protection panels - - - -

A12.7.7.7. Main bus power contactors - - - -




A12.8. DC ELECTRICAL POWER SYSTEM




A12.8.2.1. DC Power Generation - - - -

A12.8.2.2. Other systems - - - -


A12.8.4. Inspect - - - -


A12.8.5.1. DC Converters - - - -

A12.8.5.2. Battery control relay assembly - - - -

A12.8.5.3. Aircraft battery - - - -

A12.8.6 Repair comoponents - - - -



207Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A12.8.7.1. DC Converters - - - -

A12.8.7.2. Battery control relay assembly - - - -

A12.8.7.3. Aircraft battery - - - -



A12.9. EXTERNAL ELECTRICAL POWER SYSTEM





A12.9.4. Inspect - - - -








A12.9.8. Apply external Power - - - -

A12.9.9. Remove external power - - - -

A12.9.10. Lubricate external power receptacle - - - -



A12.10. ELECTRICAL POWER SYSTEM, DISTRIBUTION





A12.10.4. Inspect - - - -





TR: Applicable F-16 Tos and 8 series component TOs





208Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A12.11.4. Inspect - - - -


A12.11.5.1. Fire detection set control unit - - - -

A12.11.5.2. Overheat detection set control unit - - - -

A12.11.5.3. Fire and overheat sensing elements - - - -



A12.11.7.1. Fire detection set control unit - - - -

A12.11.7.2. Overheat detection set control unit - - - -

A12.11.7.3. Fire and overheat sensing elements - - - -

A12.12. FUEL INERTING SYSTEM

TR: Applicable F-16 TOs, 8 series component Tos, and TO 6J14-4-9-2




A12.12.4. Inspect - - - -




A12.12.8. Service Halon Bottle

A12.12.8.1. Service with nitrogen - - - -

A12.12.8.2. Service with halon - - - -



A12.13. FLIGHT CONTROL SYSTEMS, SPEEDBRAKES





A12.13.4. Inspect - - - -


A12.13.5.1. 43-degree switch - - - -

A12.13.5.2. Speed brake close position switch - - - -


A12.13.6.1. 43-degree switch - - - -

A12.13.6.2. Speed brake close position switch - - - -



209Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A12.14. FUEL SYSTEM, DISTRIBUTION

TR: Applicable F-16 Tos, 8 series component Tos


A12.14.1.1. Aerial Refuel System - - - -

A12.14.1.2. Engine Fuel Shutoff - - - -

A12.14.1.3. Fuel Distribution - - - -


A12.14.2.1. Fuel shutoff valve - - - -



A12.14.4. Inspect - - - -






A12.15. LANDING GEAR EXTENTION AND RETRACTION

TR: Applicable F-16 Tos, 16 series component Tos




A12.15.4. Inspect - - - -


A12.15.5.1. Landing gear control handle - - - -





A12.15.7.1. Landing gear control handle - - - -





A12.16. LANDING GEAR WHEELS AND BRAKES





210Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A12.16.4. Inspect - - - -


A12.16.5.1. Brake control/anti-skid assembly - - - -

A12.16.5.2. Main weight on wheel switch - - - -

A12.16.5.3. Wheel speed sensor - - - -



A12.16.6.1. Brake control/anti-skid assembly - - - -

A12.16.6.2. Main weight on wheel switch - - - -

A12.16.6.3. Wheel speed sensor - - - -



A12.17. NOSE WHEEL STEERING SYSTEM





A12.17.4. Inspect - - - -


A12.17.5.1. Feedback potentiometer - - - -

A12.17.5.2. Command potentiometer - - - -

A12.17.5.3. Steering control box - - - -

A12.17.5.4. Nose landing gear weight-on-wheel switch - - - -



A12.17.6.1. Feedback potentiometer - - - -

A12.17.6.2. Command potentiometer - - - -

A12.17.6.3. Steering control box - - - -

A12.17.6.4. Nose landing gear weight-on-wheel switch - - - -


A12.17.7. Adjust feedback potentiometer - - - -


A12.18. LANDING GEAR POSITION AND WARNING

TR: Applicable F-16 Tos, 8 series component TOs





211Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A12.18.4. Inspect - - - -


A12.18.5.1. MLG door actuator - - - -

A12.18.5.2. NLG door actuator - - - -

A12.18.5.3. MLG downlock switch - - - -

A12.18.5.4. NLG downlock switch - - - -

A12.18.5.5. MLG uplock switch - - - -



A12.18.7.1. MLG door actuator - - - -

A12.18.7.2. NLG door actuator - - - -

A12.18.7.3. MLG downlock switch - - - -

A12.18.7.4. NLG downlock switch - - - -

A12.18.7.5. MLG uplock switch - - - -



A12.19. ARRESTING HOOK





A12.19.4. Inspect - - - -


A12.19.5.1. Uplock switch - - - -


A12.19.6.1. Uplock switch - - - -


A12.20. INTERNAL LIGHTING SYSTEM

TR: Applicable F-16 Tos, 8 series and 16 series TOs


A12.20.1.1. Internal cockpit lighting system - - - -

A12.20.1.2. Master caution/warning system - - - -



A12.20.4. Inspect - - - -





212Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A12.21. EXTERNAL LIGHTING SYSTEM





A12.21.4. Inspect - - - -







TR: Applicable F-16 TOs, AFOSH Standards, and TO 15X-1-1



A12.22.2.1. 60/180 day oxygen regulator - - - -

A12.22.2.2. Oxygen system tubing purge - - - -

A12.22.2.3. Hot purge liquid oxygen converter - - - -

A12.22.2.4. Other system operational checks - - - -


A12.22.4. Inspect - - - -


A12.22.5.1. Converter - - - -




A12.22.6.1. Converter - - - -



A12.22.7. Perform leak checks - - - -

A12.22.8. Clean components - - - -



A12.23. ELECTRICAL PANELS AND MULTIPURPOSECOMPONENTS



213Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A12.23.3. Inspect - - - -





A12.23.8 Bench check components - - - -

A12.24. EMERGENCY POWER SYSTEM




A12.24.2.1. EPU auto manual start signal checkout - - - -

A12.24.2.2. EPU mono-propellant mode checkout - - - -

A12.24.2.3. EPU bleed air mode checkout - - - -

A12.24.2.4. Other systems - - - -


A12.24.4. Inspect - - - -


A12.24.5.1. EPU speed controller - - - -

A12.24.5.2. EPU bleed air shutoff valve - - - -




A12.24.7.1. EPU speed controller - - - -

A12.24.7.2. EPU bleed air shutoff valve - - - -


A12.24.8. EPU safety - - - -

A12.24.9. Hydrazine safety - - - -



A12.25. ENGINE STARTING SYSTEM

TR: Applicable F-16 TOs, 6 & 8 series component TOs



A12.25.2.1. Jet fuel starter weight-on-wheels - - - -

A12.25.2.2. Other system operational checks - - - -


214Attachment 12

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A12.25.4. Inspect - - - -






A12.26. CANOPY SYSTEM

TR: Applicable F-16 TO




A12.26.4. Inspect - - - -




KC-10 TRAINING REQUIREMENTSSTS 2A6X6, October 2002

215Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 13

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 11 will be performed by personnel assigned to maintain KC-10 aircraft.



NOTE 4: Address comments and recommended changes through Unit Training Managers to the MAJCOM Maintenance Training Manager @ HQAMC/LGMMT, 402 Scott Drive Unit 2A2, Scott AFB, IL 62225-5308; or call DSN 576-4787. MAJCOM Training and Functional Managers forward inputs tothe AETC Training Manager, DSN 736-2772.



A13.1.1.1. 400 Hertz AC generator system operational fundamentals

TR: TO 1C-10(K)A-2-24-00

- - - -

A13.1.1.2. Emergency AC power operational fundamentals

TR: TO 1C-10(K)A-2-24-20

- - - -


A13.1.2.1. AC generator system operational checkout

TR: TO 1C-10(K)A-2-24-20

* - - - -

A13.1.2.2. Emergency AC power operational checkout

TR: TO 1C-10(K)A-2-24-24

* - - - -


A13.1.4. Inspect

A13.1.4.1. Generator control unit/bus control unit

TR: TO 1C-10(K)A-2-24-21

* - - - -

A13.1.4.2. AC power relays (generator, bus tie, aux. power, ground service and ext. power)

TR: TO 1C-10(K)A-2-24-21

* - - - -

A13.1.4.3. Remote control circuit breakers

TR: TO 1C-10(K)A-2-24-50

- - - -

A13.1.4.4. 1200 VA static inverter

TR: TO 1C-10(K)A-2-24-24

- - - -

A13.1.4.5. CSD load controller - - - -



TR: TO 1C-10(K)A-2-24-21

- - - -

A13.1.5.2. AC power relays (generator, bus tie, aux power, ground service and ext power)

TR: TO 1C-10(K)A-2-24-21

- - - -


TR: TO 1C-10(K)A-2-24-50

- - - -

- - - -


216Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


TR: TO 1C-10(K)A-2-24-24

- - - -





TR: TO 1C-10(K)A-2-24-21

- - - -

A13.1.7.2. AC power relays (generator, bus tie, aux power, ground service and ext power)

TR: TO 1C-10(K)A-2-24-21

- - - -


TR: TO 1C-10(K)A-2-24-50

- - - -


TR: TO 1C-10(K)A-2-24-24

- - - -



A13.1.8.1. Adjust Constant Speed Drive (CSD) basic speed

TR: TO 1C-10(K)A-2-24-10

- - - -



A13.2.1.1. DC power cross tie operational fundamentals

TR: TO 1C-10(K)A-2-24-30

- - - -


A13.2.2.1. Aircraft battery charging system operational checkout

TR: TO 1C-10(K)A-2-24-30

* - - - -

A13.2.2.2. DC power cross tie operational checkout

TR: TO 1C-10(K)A-2-24-30

- - - -


A13.2.3.1. Aircraft battery charging system troubleshooting

TR: TO 1C-10(K)A-2-24-TAFI

- - - -

A13.2.4. Inspect

A13.2.4.1. Transformer rectifier unit

TR: TO 1C-10(K)A-2-24-31

* - - - -

A13.2.4.2. Charger

TR: TO 1C-10(K)A-2-24

- - - -



TR: TO 1C-10(K)A-2-24-31

- - - -


217Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A13.2.5.2. Charger

TR: TO 1C-10(K)A-2-24

- - - -




TR: TO 1C-10(K)A-2-24-31

- - - -

A13.2.7.2. Charger

TR: TO 1C-10(K)A-2-24

- - - -

A13.2.7.3. Aircraft batteries

TR: TO 1C-10(K)A-2-24

- - - -

A13.2.8. Bench check - - - -









A13.3.8. Bench check - - - -



A13.4.1.1. Emergency lighting operational fundamentals

TR: TO 1C-10(K)A-2-33-51

- - - -


A13.4.2.1. Emergency lighting operational checkout

TR: TO 1C-10(K)A-2-33-51

* - - - -


A13.4.4. Inspect

A13.4.4.1. Solid state dimmer

TR: TO 1C-10(K)A-2-33-49

- - - -

A13.4.4.2. Anti collision light power supply

TR: TO 1C-10(K)A-2-33-45

- - - -

A13.4.4.3. High intensity light controller

TR: TO 1C-10(K)A-2-33-47

- - - -

A13.4.4.4. Emergency lights battery power supply

TR: TO 1C-10(K)A-2-233-51

- - - -



218Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


TR: TO 1C-10(K)A-2-33-49

- - - -


TR: TO 1C-10(K)A-2-33-45

- - - -


TR: TO 1C-10(K)A-2-33-47

- - - -


TR: TO 1C-10(K)A-2-233-51

- - - -

A13.4.5.5. Light bulbs

TR: TO 1C-10(K)A-2-33

- - - -




TR: TO 1C-10(K)A-2-33-49

- - - -


TR: TO 1C-10(K)A-2-33-45

- - - -


TR: TO 1C-10(K)A-2-33-47

- - - -


TR: TO 1C-10(K)A-2-233-51

- - - -

A13.4.7.5. Light bulbs

TR: TO 1C-10(K)A-2-33

- - - -


A13.4.8.1. Operate lighting systems

TR: TO 1C-10(K)A-2-33

- - - -




A13.5.2.1. Perform BITE check of proximity electronics unit

TR: TO 1C-10(K)A-2-32-61

- - - -

A13.5.2.2. Brake assembly

TR: TO 1C-10(K)A-2-32-40

- - - -

A13.5.3. Troubleshoot Landing gear Systems * - - - -

A13.5.4. Inspect Landing Gear Systems * - - - -


A13.5.5.1. Main Landing Gear Wheel and the Assembly

TR: TO 1C-10(K)A-2-32-41

- - - -

A13.5.5.2. Centerline Landing Gear Wheel and Tire Assembly - - - -


219Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: TO 1C-10(K)A-2-32-41

A13.5.5.3. Centerline Landing Gear Wheel and Tire Assembly Alternate procedure No. 1

- - - -


TR: TO 1C-10(K)A-2-32-43

- - - -

A13.5.5.5. Landing gear position and warning proximity electronics unit

TR: 1C-10(K)A-2-32-61

- - - -

A13.5.5.6. Landing gear position indicator

TR: TO 1C-10(K)A-2-32-61

- - - -

A13.5.5.7. Proximity sensors/position switches

TR: TO 1C-10(K)A-2-32-61

- - - -


A13.5.6.1. Centerline landing gear extension and retraction (supervisor)

TR: TO 1C-10(K)A-2-32-38

- - - -


A13.5.7.1. Main Landing Gear Wheel and the Assembly

TR: TO 1C-10(K)A-2-32-41

- - - -

A13.5.7.2. Centerline Landing Gear Wheel and Tire Assembly

TR: TO 1C-10(K)A-2-32-41

- - - -

A13.5.7.3. Centerline Landing Gear Wheel and Tire Assembly Alternate procedure No. 1

- - - -


TR: TO 1C-10(K)A-2-32-43

- - - -

A13.5.7.5. Landing gear position warning proximity electronics unit

TR: 1C-10(K)A-2-32-61

- - - -

A13.5.7.6. Landing gear position indicator

TR: TO 1C-10(K)A-2-32-61

- - - -

A13.5.7.7. Proximity sensors/position switches

TR: TO 1C-10(K)A-2-32-61

- - - -


A13.5.8.1. Centerline landing gear extension and retraction (supervisor)

TR: TO 1C-10(K)A-2-32-38

- - - -




A13.6.2.1. Perform BITE test of anti-skid control box

TR: TO 1C-10(K)A-2-32-45

- - - -


220Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A13.6.4. Inspect

A13.6.4.1. Anti-skid control box

TR: TO 1C-10(K)A-2-232-45

- - - -

A13.6.4.2. Anti-skid wheel speed transducer

TR: TO 1C-10(K)A-2-32-45

* - - - -



TR: TO 1C-10(K)A-2-232-45

- - - -


TR: TO 1C-10(K)A-2-32-45

- - - -




TR: TO 1C-10(K)A-2-232-45

- - - -


TR: TO 1C-10(K)A-2-32-45

- - - -

A13.6.8. Bench check - - - -

A13.7. NOSE GEAR SYSTEM




A13.7.4. Inspect

A13.7.4.1. Nose Landing Gear Wheel and Tire Assembly

TR: TO 1C-10(K)A-2-32-41

- - - -



TR: TO 1C-10(K)A-2-32-41

- - - -




TR: TO 1C-10(K)A-2-32-41

- - - -


A13.7.8.1. Nose and main landing gear extension and retraction (supervisor)

TR: TO 1C-10(K)A-2-32-30

- - - -

A13.7.8.2. Nose and main landing gear extension and retraction (handle operator)

TR: TO 1C-10(K)A-2-32-30

- - - -


221Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A13.8. PRIMARY AND SECONDARY FLIGHT CONTROL SYSTEMS


A13.8.1.1. Auto-spoiler system operational fundamentals

TR: TO 1C-10(K)A-2-27-60

- - - -

A13.8.2. Auto-spoiler system operational checkout

TR: TO 1C-10(K)A-2-27-63

* - - - -

A13.8.3. Troubleshoot Auto-spoiler system

TR: TO 1C-10(K)A-2-27-60-TAFI

- - - -

A13.8.4. Inspect

TR: 1C-10(K)A-6-WC-1, 1C-10(K)A-3-1, 1C-10(K)A-3-2 and 1C-10(K)A-3-3

A13.8.4.1. Aileron - - - -

A13.8.4.2. Rudder - - - -

A13.8.4.3. Elevator - - - -

A13.8.4.4. Flaps - - - -

A13.8.4.5. Slats - - - -

A13.8.4.6. Spoilers - - - -

A13.8.4.7. Auto-spoiler control box

TR: TO 1C-10(K)A-2-27-63

- - - -

A13.8.4.8. Spoiler electric actuator

TR: TO 1C-10(K)A-2-227-63

- - - -

A13.8.4.9. Horizontal stabilizer - - - -



TR: TO 1C-10(K)A-2-27-63

- - - -


TR: TO 1C-10(K)A-2-227-63

- - - -




TR: TO 1C-10(K)A-2-27-63

- - - -


TR: TO 1C-10(K)A-2-227-63

- - - -

A13.8.8. Bench check - - - -






222Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC





A13.9.8. Bench check - - - -

A13.9.9. Operate smoke detection system

TR: TO 1C-10(K)A-2-26

- - - -

A13.9.10. Operate fire detection system (A and B loops)

TR: TO 1C-10(K)A-2-26

- - - -









A13.10.8. Bench check - - - -









A13.11.8. Bench check - - - -






A13.12.4. Inspect

A13.12.4.1. Master warning and caution controller

TR: TO 1C-10(K)A-2-33-15

- - - -

A13.12.4.2. Aux warning and caution controller

TR: TO 1C-10(K)A-2-33-15

- - - -

A13.12.4.3. Pilot/co-pilot overheat annunciator panel - - - -


223Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: TO 1C-10(K)A-2-33-15

A13.12.4.4. Landing gear position and warning proximity electronics unit

TR: 1C-10(K)A-2-32-61

- - - -



TR: TO 1C-10(K)A-2-33-15

- - - -


TR: TO 1C-10(K)A-2-33-15

- - - -

A13.12.5.3. Pilot/co-pilot overheat annunciator panel

TR: TO 1C-10(K)A-2-33-15

- - - -




TR: TO 1C-10(K)A-2-33-15

- - - -


TR: TO 1C-10(K)A-2-33-15

- - - -

A13.12.7.3. Pilot/co-pilot overheat annunciator panel

TR: TO 1C-10(K)A-2-33-15

- - - -

A13.12.8. Bench check - - - -

A13.12.9. Operate warning and indicator lights

TR: TO 1C-10(K)A-2-33

- - - -









A13.13.8. Bench check - - - -

A13.13.9. Operate passenger doors

TR: TO 1C-10(K)A-2-52

- - - -

A13.13.10. Operate cargo door

TR: TO 1C-10(K)A-2-52

- - - -

A13.13.11. Raise/lower to/from maintenance position air refueling operators door

TR: TO 1C-10(K)A-2-52

- - - -



224Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC






A13.14.5.1. Flight engineers fuel panel switches

TR: TO 1C-10(K)A-2-110-28

- - - -



TR: TO 1C-10(K)A-2-110-28

- - - -



TR: TO 1C-10(K)A-2-110-28

- - - -

A13.14.8. Bench check - - - -









A13.15.8. Bench check - - - -









A13.16.8. Bench check - - - -



A13.17.1.1. Manifold failure detection operational fundamentals

TR: 1C-10(K)A-2-36-23

- - - -

A13.17.1.2. Manifold isolation operational fundamentals

TR: TO 1C-10(K)A-2-36-15

- - - -


225Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A13.17.2.1. Perform BITE test of pneumatic system

TR: TO 1C-10(K)A-2-36-00

- - - -

A13.17.2.2. Operate AV-102 Pneumatic System tester with engines operating

TR: TO 1C-10(K)A-2-36-TAFI

- - - -

A13.17.2.3. Manifold failure detection system operational checkout

TR: TO 1C-10(K)A-2-36-23

* - - - -


A13.17.4. Inspect

A13.17.4.1. Pneumatic system controller

TR: TO 1C-10(K)A-2-36-27

- - - -

A13.17.4.2. Pressure regulator valve

TR: TO 1C-10(K)A-2-236-12

- - - -

A13.17.4.3. High pressure bleed valve

TR: TO 1C-10(K)A-2-36-11

- - - -


TR: TO 1C-10(K)A-2-36-13

- - - -

A13.17.4.5. Over pressure valve

TR: TO 1C-10(K)A-2-36-12

- - - -

A13.17.4.6. Pre-cooler assembly

TR: TO 1C-10(K)A-2-36-13

- - - -

A13.17.4.7. Regulated pressure sensor

TR: TO 1C-10(K)A-2-36-27

- - - -

A13.17.4.8. High stage temperature sensor

TR: TO 1C-10(K)A-2-36-11

- - - -

A13.17.4.9. Manifold failure detector controller

TR: TO 1C-10(K)A-2-36-23

- - - -

A13.17.4.10. Manifold fail press to test switch

TR: TO 1C-10(K)A-2-23

- - - -

A13.17.4.12. Manifold isolation valves

TR: TO 1C-10(K)A-2-36-15

- - - -

A13.17.4.13. Manifold fail pressure switch

TR: TO 1C-10(K)A-2-36-23

- - - -

A13.17.4.14. Manifold fail thermal switch

TR: TO 1C-10(K)A-2-236-23

- - - -

A13.17.4.15. Manifold failure detector loop elements

TR: TO 1C-10(K)A-2-36-23

- - - -


226Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



TR: TO 1C-10(K)A-2-36-27

- - - -


TR: TO 1C-10(K)A-2-236-12

- - - -


TR: TO 1C-10(K)A-2-36-11

- - - -


TR: TO 1C-10(K)A-2-36-13

- - - -


TR: TO 1C-10(K)A-2-36-12

- - - -


TR: TO 1C-10(K)A-2-36-13

- - - -


TR: TO 1C-10(K)A-2-36-27

- - - -


TR: TO 1C-10(K)A-2-36-11

- - - -


TR: TO 1C-10(K)A-2-36-23

- - - -

A13.17.5.10. Manifold fail press to test switch

TR: TO 1C-10(K)A-2-23

- - - -


TR: TO 1C-10(K)A-2-36-15

- - - -


TR: TO 1C-10(K)A-2-36-23

- - - -


TR: TO 1C-10(K)A-2-236-23

- - - -


TR: TO 1C-10(K)A-2-36-23

- - - -




TR: TO 1C-10(K)A-2-36-27

- - - -


TR: TO 1C-10(K)A-2-236-12

- - - -


TR: TO 1C-10(K)A-2-36-11

- - - -

A13.17.7.4. Fan air valve - - - -


227Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: TO 1C-10(K)A-2-36-13


TR: TO 1C-10(K)A-2-36-12

- - - -


TR: TO 1C-10(K)A-2-36-13

- - - -


TR: TO 1C-10(K)A-2-36-27

- - - -


TR: TO 1C-10(K)A-2-36-11

- - - -


TR: TO 1C-10(K)A-2-36-23

- - - -

A13.17.7.10 Manifold fail press to test switch

TR: TO 1C-10(K)A-2-23

- - - -


TR: TO 1C-10(K)A-2-36-15

- - - -


TR: TO 1C-10(K)A-2-36-23

- - - -


TR: TO 1C-10(K)A-2-236-23

- - - -


TR: TO 1C-10(K)A-2-36-23

- - - -

A13.17.8. Bench check - - - -

A13.17.9. Operate bleed air system

TR: TO 1C-10(K)A-2-36

* - - - -




A13.18.2.1. Pack condition indication system operational checkout

TR: TO 1C-10(K)A-2-221-50

- - - -

A13.18.2.2. Trim air system operational checkout

TR: TO 1C-10(K)A-2-21-21

- - - -

A13.18.2.3. Perform BITE test of air conditioning system

TR: TO 1C-10(K)A-2-21-60

- - - -


A13.18.4. Inspect

A13.18.4.1. Trim air valve

TR: TO 1C-10(K)A-2-21-62

- - - -

A13.18.4.2. APU and pack demand temperature controller - - - -


228Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: 1C-10(K)A-2-21-60

A13.18.4.3. Zone temperature controller

TR: TO 1C-10(K)A-2-21-62

- - - -

A13.18.4.4. Pack temperature controller

TR: TO 1C-10(K)A-2-221-62

- - - -

A13.18.4.5. Zone and duct temperature sensors

TR: TO 1C-10(K)A-2-21-64

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -

A13.18.4.7. Pack heat exchanger

TR: TO 1C-10(K)A-2-21-53

- - - -

A13.18.4.8. Rate of flow control valve

TR: TO 1C-10(K)A-2-21-51

- - - -

A13.18.4.9. Control valve

TR: TO 1C-10(K)A-2-21-51

- - - -

A13.18.4.10. Turbine by-pass valve

TR: TO 1C-10(K)A-2-221-62

- - - -

A13.18.4.11. Turbine by-pass valve/pack inlet and exhaust door actuator

TR: TO 1C-10(K)A-2-21-62

- - - -

A13.18.4.12. Anti-ice valve

TR: TO 1C-10(K)A-2-21-53

- - - -

A13.18.4.13. Pack overheat thermostat

TR: TO 1C-10(K)A-2-21-53

- - - -

A13.18.4.14. Equipment Cooling - - - -

A13.18.4.15. Center Accessory Compartment (CAC) fan

TR: TO 1C-10(K)A-2-21-26

- - - -

A13.18.4.16. CAC flow detector

TR: TO 1C-10(K)A-2-21-26

- - - -

A13.18.4.17. Radio rack fan

TR: TO 1C-10(K)A-2-21-26

- - - -

A13.18.4.18. Radio rack fan flow detector

TR: TO 1C-10(K)A-2-21-26

- - - -

A13.18.4.19. Inertial navigation (1NU) fan

TR: TO 1C-10(K)A-2-21-26

- - - -

A13.18.4.20. (INU) fan start capacitor

TR: TO 1C-10(K)A-2-110-21 and 1-1A-14

- - - -

A13.18.4.21. (INU) fan flow detector

TR: TO 1C-10(K)A-2-21-26

- - - -


229Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A13.18.4.22. Center instrument panel fan

TR: TO 1C-10(K)A-2-21-28

- - - -

A13.18.4.23. Center instrument panel fan filter

TR: TO 1C-10(K)A-2-28

- - - -



TR: TO 1C-10(K)A-2-21-62

- - - -

A13.18.5.2. APU and pack demand temperature controller

TR: 1C-10(K)A-2-21-60

- - - -


TR: TO 1C-10(K)A-2-21-62

- - - -


TR: TO 1C-10(K)A-2-221-62

- - - -


TR: TO 1C-10(K)A-2-21-64

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


TR: TO 1C-10(K)A-2-21-51

- - - -


TR: TO 1C-10(K)A-2-21-51

- - - -

A13.18.5.10. Turbine by-pass valve

TR: TO 1C-10(K)A-2-221-62

- - - -


TR: TO 1C-10(K)A-2-21-62

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -



TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


230Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-110-21 and 1-1A-14

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-28

- - - -




TR: TO 1C-10(K)A-2-21-62

- - - -

A13.18.7.2. APU and pack demand temperature controller

TR: TO 1C-10(K)A-2-21-60

- - - -


TR: TO 1C-10(K)A-2-21-62

- - - -


TR: TO 1C-10(K)A-2-221-62

- - - -


TR: TO 1C-10(K)A-2-21-64

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


TR: TO 1C-10(K)A-2-21-51

- - - -


TR: TO 1C-10(K)A-2-21-51

- - - -

A13.18.7.10 Turbine by-pass valve

TR: TO 1C-10(K)A-2-221-62

- - - -


TR: TO 1C-10(K)A-2-21-62

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


TR: TO 1C-10(K)A-2-21-53

- - - -


231Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-110-21 and 1-1A-14

- - - -


TR: TO 1C-10(K)A-2-21-26

- - - -


TR: TO 1C-10(K)A-2-21-28

- - - -

A13.18.8. Bench check - - - -




A13.19.2.1. Perform BITE test of cabin pressurization system

TR: TO 1C-10(K)A-2-21-31

- - - -


A13.19.4. Inspect - - - -

A13.19.4.1. Cabin pressure controller

TR: TO 1C-10(K)A-2-221-31

- - - -

A13.19.4.2. Cabin altitude rate selector

TR: TO 1C-10(K)A-2-21-31

- - - -


TR: TO 1C-10(K)A-2-21-31

- - - -

- - - -

A13.19.4.4. Thrust recovery valve actuator

TR: TO 1C-10(K)A-2-21-31

- - - -



TR: TO 1C-10(K)A-2-221-31

- - - -

A13.19.5.2. Cabin altitude rate selector - - - -


232Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: TO 1C-10(K)A-2-21-31


TR: TO 1C-10(K)A-2-21-31

- - - -


TR: TO 1C-10(K)A-2-21-31

- - - -




TR: TO 1C-10(K)A-2-221-31

- - - -

A13.19.7.2. Cabin altitude rate selector

TR: TO 1C-10(K)A-2-21-31

- - - -


TR: TO 1C-10(K)A-2-21-31

- - - -


TR: TO 1C-10(K)A-2-21-31

- - - -

A13.19.8. Bench check - - - -









A13.20.8. Bench check - - - -



TR: TO 1C-10(K)A-2-235-00

- - - -

A13.21.2. Operational check of oxygen system pressure regulator

TR: TO 1-10(K)A-2-35-12

* - - - -




A13.21.5.1. Oxygen regulator

TR: TO 1C-10(K)A-2-35-12

- - - -

A13.21.5.2. Oxygen cylinder regulator/re-fill valve

TR: TO 1C-10(K)A-2-235-12

- - - -


233Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A13.21.5.3. Oxygen cylinders

TR: TO 1C-10K)A-2-35-30

- - - -

A13.21.5.4. Quantity indicator transducer

TR: TO 1C-10(K)A-35-14

- - - -



A13.21.7.1. Oxygen regulator

TR: TO 1C-10(K)A-2-35-12

- - - -

A13.21.7.2. Oxygen cylinder regulator/re-fill valve

TR: TO 1C-10(K)A-2-235-12

- - - -

A13.21.7.3. Oxygen cylinders

TR: TO 1C-10K)A-2-35-30

- - - -

A13.21.7.4. Quantity indicator transducer

TR: TO 1C-10(K)A-35-14

- - - -

A13.21.8. Bench check - - - -

A13.21.9. Operate oxygen system

TR: TO 1C-10(K)A-2-35

- - - -

A13.22. AERIAL REFUELING SYSTEM



A13.22.3. Troubleshoot System components - - - -

A13.22.4. Inspect System components * - - - -




A13.22.8. Bench check - - - -

A13.22.9. Boom

A13.22.9.1. Boom Operation : raise lower

TR: TO 1C-10(K)A-2-28 Part III and 1C-10(K)A-2-28CL-1

- - - -

A13.22.9.2. Boom Operation : extend/retract

TR: TO 1C-10(K)A-2-28 Part III and 1C-10(K)A-2-28CL-1

- - - -

- - - -

A13.22.9.3. Operation of ARO Status Test Panel (STP)

TR: TO 1C-10(K)A-2-28-79 (Part II)

- - - -

A13.22.9.4. Service boom Independent Disconnect System (IDS)

TR: TO 1C-10(K)A-2-28-79 (Part II)

- - - -


234Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A13.22.9.5. Service surge boot

TR: TO 1C-10(K)A-2-28-71-09

- - - -

A13.22.9.6. Clean boom signal coil

TR: TO 1C-10(K)A-2-28-76

- - - -

A13.22.9.7. Deploy boom (swing)

TR: TO 1C-10(K)A-2-28 (Part II) and 1C-10(K)A-2-CL-1

- - - -

A13.22.10. Hose and Drogue

A13.22.10.1. Deploy centerline hose and drogue

TR: TO 1C-10(K)A-2-CL-1

- - - -

A13.22.10.2. Stow centerline hose and drogue

TR: TO 1C-10(K)A-2-CL-1

- - - -

A13.22.10.3. Deploy wing hose and drogue

TR: TO 1C-10(K)A-2-28

- - - -

A13.22.10.4. Stow wing hose and drogue

TR: TO 1C-10(K)A-2-28

- - - -

A13.22.10.5. USARRSI (Universal Air Refueling Receptacle Slipway Installation)

- - - -

A13.22.10.6. Clean UARRSI Signal Coil

TR: TO 1C-10(K)A-2-28-91 (Part II)

- - - -


TR:




A13.23.4. Inspect

A13.23.4.1. Windows/windshield

TR: TO 1C-10(K)A-2-56

- - - -

A13.23.4.2. Rain removal system

TR: TO 1C-10(K)A-2-30

- - - -

A13.23.4.3. Accumulators

TR: TO 1C-10(K)A-2-29 and 1C-10(K)A-2-32

- - - -

A13.23.4.4. Hydraulic system

TR: TO 1C-10(K)A-2-12 and 1C-10(K)A-2-12-2

- - - -


A13.23.5.1. IAW exit sign

TR: TO 1C-10(K)A-2-25-53-05

- - - -

A13.23.5.2. Rain repellant bottle

TR: TO 1C-10(K)A-2-30

- - - -


235Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A13.23.5.3. Aircrew bunks

TR: TO 1C-10(K)A-2-53-01 and 25-53-03

- - - -

A13.23.5.4. Increased Accommodation Unit (IAU)

TR: 1C-10(K)A-2-25-21

- - - -

A13.23.5.5. IAU passenger oxygen

TR: TO 1C-10(K)A-2-25-53-06

- - - -

A13.23.5.6. IAU seat pallets

TR: 1C-10(K)A-2-25-53-09

- - - -

A13.23.5.7. Cargo Barrier Net

TR: TO 1C-10(K)A-2-25-53-01 and 25-53-03

- - - -

A13.23.5.8. IAU "Z" lav/storage cabinet

TR: TO 1C-10(K)A-2-25-53-07 and 25-53-08

- - - -

A13.23.5.9. Environmental Curtain

TR: TO 1C-10(K)A-2-25-53-01 and 25-53-03

- - - -



A13.23.7.1. IAW exit sign

TR: TO 1C-10(K)A-2-25-53-05

- - - -

A13.23.7.2. Rain repellant bottle

TR: TO 1C-10(K)A-2-30

- - - -

A13.23.7.3. Aircrew bunks

TR: TO 1C-10(K)A-2-53-01 and 25-53-03

- - - -

A13.23.7.4. Increased Accommodation Unit (IAU)

TR: 1C-10(K)A-2-25-21

- - - -

A13.23.7.5. IAU passenger oxygen

TR: TO 1C-10(K)A-2-25-53-06

- - - -

A13.23.7.6. IAU seat pallets

TR: 1C-10(K)A-2-25-53-09

- - - -

A13.23.7.7. Cargo Barrier Net

TR: TO 1C-10(K)A-2-25-53-01 and 25-53-03

- - - -

A13.23.7.8. IAU "Z" lav/storage cabinet

TR: TO 1C-10(K)A-2-25-53-07 and 25-53-08

- - - -

A13.23.7.9. Environmental Curtain

TR: TO 1C-10(K)A-2-25-53-01 and 25-53-03

- - - -

A13.23.8. Bench check - - - -

A13.23.9. Operate rain removal system

TR: TO 1C-10(K)A-2-30

- - - -

A13.23.10. Operate crew member electrically operated/manual seats

- - - -


236Attachment 13

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

TR: TO 1C-10(K)A-2-25-11-03 thru 25-11-10

A13.23.11. Operate aerial refueling operators station manual seats

TR: TO 1C-10(K)A-2-25-11-11 thru 25-91-04

- - - -

A13.23.12. Operate hydraulic system using auxiliary and reversible pumps

TR: TO 1C-10(K)A-2-29

- - - -

A13.23.13. Raise/lower tail cone

TR: TO 1C-10(K)A-2-53

- - - -

A13.23.14. Operate nose radome

TR: TO 1C-10(K)A-2-52

- - - -


A13.24.1 Inspect/operate portable external electrical power unit

- - - -

A13.24.2 Inspect/use ground maintenance stands - - - -

A13.24.3. Dropped Object Prevention Program (DOPP) - - - -

A13.24.4. Defensive Systems (DS) familiarization (on applicable aircraft)

- - - -

A13.24.5 Apply/disconnect external electrical power unit - - - -

A13.24.6 Perform wing/tail walker duties - - - -

A13.24.7. Team communications - - - -

A13.24.8 Connect/Disconnect External Pneumatics

TR: TO 1C-10(K)A-2-36

- - - -

A13.24.9 Service engine, CSD and APU oil systems (pressure cart method)

TR: TO 1C-10(K)A-2-12 and 1C-10(K)A-2-12-5

- - - -

A13.24.10 Service engine, CSD and APU oil systems(gravity fill method)

TR: TO 1C-10(K)A-2-12 and 1C-10(K)A-2-12-5

- - - -

A13.24.11 Service hydraulic system

TR: TO 1C-10(K)A-2-12 and 1C-10(K)A-2-12-2

- - - -

A13.24.12 Service accumulators

TR: TO 1C-10(K)A-2-28, 1C-10(K)A-2-28 and 1C-10(K)A-2-32

- - - -

A13.24.13 Service gaseous nitrogen

TR: TO 1C-10(K)A-2-28 and 1C-10(K)A-2-32

- - - -


237Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 14

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 8 will be performed by personnel assigned to maintain KC-135 aircraft.



NOTE 4: Address comments and recommended changes through Unit Training Managers to the MAJCOM Maintenance Training Manager @ HQ AMC/LGMMT, 402Drive Unit 2A2, Scott AFB, IL 62225-5308; or call DSN 576-4787. MAJCOM Training and Functional Managers forward inputs to the AETC Training Manager, DSNA14.1. METERS AND TESTERS TR: Applicable 33

series TOsA14.1.1. Use decade box - - - -

A14.1.2. Use anti-skid tester - - - -

A14.1.3. Use transformer-rectifier load bank - - - -

A14.1.4. Use wheatstone bridge - - - -

A14.2. AC POWER SYSTEM TR: Applicable KC-135TOs, 8 series component TOs





A14.2.5. Operate Load Bank * - - - -


A14.2.6.1. Generator breaker - - - -

A14.2.6.2. IDG - - - -

A14.2.6.3 BPCU - - - -

A14.2.6.4 Bus-Tie Circuit Breaker - - - -

A14.2.6.5 GCU - - - -

A14.2.6.6 Current Transformer - - - -

A14.2.6.7 S/V box - - - -

A14.2.6.8 Copilot instrument generator - - - -


A14.2.7 Repair components - - - -

A14.2.8 Install Components

A14.2.8.1. Generator breaker - - - -

A14.2.8.2. IDG - - - -

A14.2.8.3 BPCU - - - -

A14.2.8.4 Bus-Tie Circuit Breaker - - - -

A14.2.8.5 GCU - - - -

A14.2.8.6 Current Transformer - - - -

A14.2.8.7 S/V box - - - -

A14.2.8.8 Copilot instrument generator - - - -


238Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A14.3. DC POWER SYSTEM TR: Applicable KC-135TOs, 8 series component TOs


A14.3.2. Operational check (use load bank) * - - - -








A14.3.7.1 Transformer rectifier - - - -



A14.4. EXTERNAL POWER SYSTEM TR: ApplicableKC-135 TOs, 8 series component TOs









A14.5. LIGHTING SYSTEM TR: Applicable KC-135TOs,8 series component TOs



A14.5.2.1. External * - - - -

A14.5.2.2. Internal * - - - -


A14.5.4. Inspect * - - - -


A14.5.5.1. Pilot director lights - - - -

A14.5.5.2. Boom/drogue lights - - - -

A14.5.5.3. Light Assembly - - - -

A14.5.5.4. Power Supply - - - -

A14.5.5.5. Dimmer Control Unit - - - -


239Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A14.5.5.6. Flasher Assembly - - - -



A14.5.7.1. Pilot director lights - - - -

A14.5.7.2. Boom/drogue lights - - - -

A14.5.7.3. Light Assembly - - - -

A14.5.7.4. Power Supply - - - -

A14.5.7.5. Dimmer Control Unit - - - -

A14.5.7.6. Flasher Assembly - - - -


A14.6. LANDING GEAR SYSTEM TR: Applicable KC-135 TOs, 8 series component TOs



A14.6.2.1. Landing Gear System */R

- - - -

A14.6.2.2. Safety switch - - - -

A14.6.2.3. Truck leveling switch - - - -

A14.6.2.4. Position A/B */R

- - - -



A14.6.5. Lever lock solenoid circuit checkout - - - -


A14.6.6.1. Safety switch * - - - -

A14.6.6.2. Lever lock solenoid - - - -



A14.6.8.1. Safety switch * - - - -

A14.6.8.2. Lever lock solenoid - - - -


A14.7. ANTI-SKID SYSTEM TR: Applicable KC-135TOs, 8 series component TOs







A14.7.5.1. Anti-skid Shield - - - -


240Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC





A14.7.7.1. Anti-skid Shield - - - -



A14.8. NOSE GEAR STEERING SYSTEM TR:Applicable KC-135 TOs, 8 series component TOs






A14.8.5.1 Linear Actuator - - - -

A14.8.5.2. Other components - - - -



A14.8.7.1 Linear Actuator - - - -

A14.8.7.2 Other components - - - -


A14.9. PRIMARY FLIGHT CONTROL SYSTEM TR:Applicable KC-135 TOs, 8 series component TOs


A14.9.2. Operational Check System */R

- - - -



A14.9.5. Remove Stab trim control switch * - - - -A14.9.6 Install Stab trim control switch * - - - -



A14.10. SECONDARY FLIGHT CONTROL SYSTEM TR:Applicable KC-135 TOs, 8 series component TOs



A14.10.2.1. Flaps - - - -



A14.10.3.1. Flaps - - - -


241Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A14.10.3.2. Other System components - - - -

A14.10.4. Inspect System components * - - - -





A14.11. OVERHEAT/FIRE WARNING SYSTEM TR:Applicable KC-135 TOs, 8 series component TOs






A14.11.5.1 Fire Detection Control Unit - - - -

A14.11.5.2 Fire Handle - - - -

A14.11.5.3 Overheat Detectors - - - -

A14.11.5.4 Sensing Elements - - - -

A14.11.5.5 Other System Components - - - -



A14.11.7.1 Fire Detection Control Unit - - - -

A14.11.7.2 Fire Handle - - - -

A14.11.7.3 Overheat Detectors - - - -

A14.11.7.4 Sensing Elements - - - -



A14.12 FIRE EXTINGUISHING SYSTEM TR:

A14.12.1 Operational fundamentals - - - -A14.12.1.1 Engine System - - - -

A14.12.1.2 APU System - - - -

A14.12.1.3 Other fire extinguishing system - - - -

A14.12.2 Operational/continuity check

A14.12.2.1 Engine System - - - -

A14.12.2.2 APU System - - - -

A14.12.2.3 Squib/cartridge electrical circuit * - - - -


A14.12.3 Troubleshoot



242Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A14.12.3.2 APU System - - - -


A14.12.4 Inspect Fire extinguishing system


A14.12.4.2 APU System - - - -

A14.12.4.3 Squib/Cartridge * - - - -



A14.12.5.1 Engine fire bottle - - - -

A14.12.5.2 APU fire bottle - - - -



A14.12.6 Install components

A14.12.6.1 Engine fire bottle - - - -

A14.12.6.2 APU fire bottle - - - -



A14.13 TAKEOFF WARNING SYSTEM TR: ApplicableKC-135 TOs, 8 series component TOs


A14.13.2 Operational Check System - - - -

A14.13.3 Troubleshoot System * - - - -

A14.13.4 Inspect System Components * - - - -

A14.13.5 Remove components - - - -


A14.13.7 Install components - - - -


A14.14 FUEL WARNING AND CONTROL SYSTEM TR:Applicable KC-135 TOs, 8 series component TOs


A14.14.2 Operational check System */R

- - - -




A14.14.5.1 Fuel management switch - - - -




A14.14.7.1 Fuel management switch - - - -


243Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A14.15 CARGO DOOR CONTROL AND WARNINGSYSTEM TR: Applicable KC-135 TOs, 8 seriescomponent TOs


A14.15.2 Operational check System - - - -







A14.16 START AND IGNITION SYSTEM TR: ApplicableKC-135 TOs, 8 series component TOs


A14.16.2 Troubleshoot

A14.16.2.1 Jet engine - - - -

A14.16.2.2 Auxiliary power unit - - - -

A14.16.3 Inspect System Components - - - -





A14.17 NESA ANTI-ICING SYSTEM TR: Applicable KC-135 TOs, 8 series component TOs


A14.17.2 Operational Check System (includes resistancecheck)

* - - - -




A14.17.5.1 Transformer - - - -

A14.17.5.2 Controller - - - -

A14.17.5.3 Thermal Switch - - - -




A14.17.7.1 Transformer - - - -

A14.17.7.2 Controller - - - -

A14.17.7.3 Thermal Switch - - - -


244Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A14.18. BLEED AIR DISTRIBUTION SYSTEM TR:Applicable KC-135 TOs, 8 series component TOs


A14.18.2 Operational check System * - - - -

A14.18.3 Perform leakage checks * - - - -




A14.18.6.1 Bleed air duct * - - - -

A14.18.6.2 Bleed air shutoff valve - - - -

A14.18.6.3 Engine Pre-cooler - - - -

A14.18.6.4 Check Valves - - - -

A14.18.6.5 Manifold Valve - - - -

A14.18.6.6 Pressure Regulator - - - -A14.18.6.7 Filters - - - -A14.18.6.8 Other System Components - - - -


A14.18.8 Hydrostatic Check Ducts - - - -


A14.18.9.1 Bleed air duct * - - - -

A14.18.9.2 Bleed air shutoff valve - - - -

A14.18.9.3 Engine Pre-cooler - - - -

A14.18.9.4 Check Valves - - - -

A14.18.9.5 Manifold Valve - - - -

A14.18.9.6 Pressure Regulator - - - -A14.18.9.7 Filters - - - -A14.18.9.8 Other System Components - - - -


A14.19. AIR CONDITIONING SYSTEM TR: ApplicableKC-135 TOs, 8 series component TOs


A14.19.2 Operational Check System * - - - -

A14.19.3 Perform System Leakage checks * - - - -




A14.19.6.1 Water separator coalescer * - - - -


245Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A14.19.6.2 Water separator - - - -

A14.19.6.3 Flow control valve - - - -

A14.19.6.4 Auxiliary heat valve - - - -

A14.19.6.5 Air cycle machine - - - -

A14.19.6.6 Primary heat exchanger - - - -

A14.19.6.7 Secondary heat exchanger - - - -

A14.19.6.8 Bypass Valve - - - -

A14.19.6.9 Temp Sensor - - - -

A14.19.6.10 35 Degree Control Valve - - - -A14.19.6.11 Ejector Valve - - - -

A14.19.6.12 Ram Air Valve - - - -

A14.19.6.13 Filters - - - -


A14.19.7 Repair Components - - - -

A14.19.8 Remove and install components

A14.19.8.1 Water separator coalescer * - - - -

A14.19.8.2 Water separator - - - -

A14.19.8.3 Flow control valve - - - -

A14.19.8.4 Auxiliary heat valve - - - -

A14.19.8.5 Air cycle machine - - - -

A14.19.8.6 Primary heat exchanger - - - -

A14.19.8.7 Secondary heat exchanger - - - -

A14.19.8.8 Bypass Valve - - - -

A14.19.8.9 Temp Sensor - - - -

A14.19.8.10 35 Degree Control Valve - - - -A14.19.8.11 Ejector Valve - - - -

A14.19.8.12 Ram Air Valve - - - -

A14.19.8.13 Filters - - - -



A14.20. PRESSURIZATION SYSTEM TR: Applicable KC-135 TOs, 8 series component TOs


A14.20.1.2 Pressurization Safety */R

- - - -

A14.20.2 Operational Check System */R

- - - -





246Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A14.20.5.1 Outflow valve - - - -

A14.20.5.2 Pneumatic relay - - - -

A14.20.5.3 Auto pressure controller - - - -

A14.20.5.4 Filters - - - -




A14.20.7.1 Outflow valve - - - -

A14.20.7.2 Pneumatic relay - - - -

A14.20.7.3 Auto pressure controller - - - -

A14.20.7.4 Filters - - - -


A14.20.8 Perform Pressure Decay Check * - - - -A14.20.9 Bench check components - - - -

A14.21 OXYGEN SYSTEM TR: AFOSH standards; TOs15X1-1, 42B5-1-2,42E1-1-1, Applicable KC-135TOs


A14.21.2 Operational check System * - - - -

A14.21.3 Troubleshoot System - - - -


A14.21.5 Purge system * - - - -


A14.21.6.1 Oxygen regulator * - - - -

A14.21.6.2 GOX Bottle - - - -

A14.21.6.3 Filler Valve - - - -

A14.21.6.4 Check Valve - - - -A14.21.6.5 Shutoff Valve - - - -

A14.21.6.6 Distribution Tubes/Hoses - - - -

A14.21.6.7 Indicator - - - -

A14.21.6.8 GOX Rack Assembly - - - -


A14.21.7.1 Oxygen regulator * - - - -

A14.21.7.2 GOX Bottle - - - -

A14.21.7.3 Filler Valve - - - -

A14.21.7.4 Check Valve - - - -A14.21.7.5 Shutoff Valve - - - -

A14.21.7.6 Distribution Tubes/Hoses - - - -


247Attachment 14

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A14.21.7.7 Indicator - - - -

A14.21.7.8 GOX Rack Assembly - - - -

A14.21.8 Perform System leak check * - - - -

A14.21.9 Procedures for cleaning components - - - -

MH-53J TRAINING REQUIREMENTSSTS 2A6X6, October 2002

248Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

ATTACHMENT 15

NOTE 1: In addition to attachment 2, the tasks and knowledge in attachment 6 will be performed by personnel assigned to maintain MH-53J aircraft.



NOTE 4: Address comments and recommended changes through the MAJCOM Functional Managers to the AETC Training Manager, DSN 736-2772

A15.1 AC POWER SYSTEM

TR: 1H-53(M)J-2-6





A15.1.4.1. AC Generators - - - -

A15.1.4.2. VRSP - - - -


A15.1.5.1. AC Generators - - - -

A15.1.5.2. VRSP - - - -


A15.2. DC POWER SYSTEMS

TR: 1H-53(M)J-2-6





A15.2.4.1. Transformer Rectifier Unit - - - -



A15.2.5.1. Transformer Rectifier Unit - - - -




TR: 1H-53(M)J-2-6





A15.3.4.1. External Power Monitor Panel - - - -




249Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A15.3.5.1. External Power Monitor Panel - - - -



A15.4. LIGHTING SYSTEMS

TR: 1H-53(M)J-2-6

A15.4.1. Operational Fundamentals

A15.4.1.1. Interior - - - -

A15.4.1.2. Exterior * - - - -

A15.4.1.3. Emergency - - - -

A15.4.2. Operational checks

A15.4.2.1. Interior - - - -

A15.4.2.2. Exterior * - - - -

A15.4.2.3. Emergency - - - -


A15.4.3.1. Interior - - - -

A15.4.3.2. Exterior * - - - -

A15.4.3.3. Emergency - - - -

A15.4.4. Inspect System Components *

A15.4.4.1. Remove Components - - - -

A15.4.4.2. Emergency Exit Lights - - - -

A15.4.4.3. Heels Light Tube - - - -

A15.4.4.4. PMG control Box - - - -

A15.4.4.5. Heels Battery - - - -

A15.4.4.6. Controllable Spotlight Assembly - - - -

A15.4.4.7. Slime Lights (Formation Lights) - - - -

A15.4.4.8. Strobe light - - - -

A15.4.4.9. NVG Segment lights - - - -

A15.4.4.10. SX-5 Light Assembly - - - -

A15.4.4.11. Lighting Control panels - - - -

A15.4.4.12. Dimmer Control Panels - - - -


A15.4.5.1. Emergency Exit Lights - - - -

A15.4.5.2. Heels Light Tube - - - -

A15.4.5.3. PMG control Box - - - -

A15.4.5.4. Heels Battery - - - -

A15.4.5.5. Controllable Spotlight Assembly - - - -

A15.4.5.6. Slime Lights (Formation Lights) - - - -

A15.4.5.7. Strobe light - - - -


250Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A15.4.5.8. NVG Segment lights - - - -

A15.4.5.9. SX-5 Light Assembly - - - -

A15.4.5.10. Lighting Control panels - - - -

A15.4.5.11. Dimmer Control Panels - - - -

A15.4.6. Repair System Component - - - -

A15.4.7. Bench Check Components - - - -


TR: 1H-53(M)J-2-1, 1H-53(M)J-2-6

A15.1. Operational Fundamentals

A15.1.1. Control - - - -

A15.1.2. Warning and indication - - - -

A15.2. Operational check

A15.2.1. Control - - - -


A15.3. Troubleshoot

A15.3.1. Control - - - -


A15.4. Inspect System Components - - - -

A15.5. Remove components

A15.5.1. Landing Gear Control Panel - - - -

A15.5.2. Indicator - - - -

A15.6. Install components

A15.6.1. Landing Gear Control Panel

A15.6.2. Indicator

A15.7. FIRE WARNING SYSTEM

TR: 1H-53(M)J-2-1


A15.7.1.1. Engine pylon - - - -

A15.7.1.2. Aux power plant (APP) and Heater - - - -


A15.7.2.1. Engine pylon - - - -

A15.7.2.2. Aux power plant (APP) and Heater - - - -


A15.7.3.1. Engine pylon - - - -

A15.7.3.2. Aux power plant And Heater - - - -


A15.7.4.1. Engine pylon - - - -

A15.7.4.2. Aux power plant (APP) - - - -


251Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A15.7.5.1. Detector - - - -

A15.7.5.2. Control Amps. - - - -

A15.7.5.3. Fire Warning Relay Assembly - - - -

A15.7.5.4. Fire Warning Control Panel - - - -


A15.7.6.1. Detector - - - -

A15.7.6.2. Control Amps. - - - -

A15.7.6.3. Fire Warning Relay Assembly - - - -

A15.7.6.4. Fire Warning Control Panel - - - -

A15.7.7. Repair System Components

A15.7.8. Bench Check System Components - - - -


TR: Applicable T.O.s



A15.8.2.1. Engine - - - -

A15.8.2.2. Aux Power Plant (APP) - - - -


A15.8.3.1. Engine - - - -

A15.8.3.2. Aux power plant (APP) - - - -


A15.8.4.1. Engine Fire Bottle - - - -

A15.8.4.2. Aux power plant (APP) Fire Bottle - - - -

A15.8.4.3. Squib / cartridge * - - - -

A15.8.4.4. Emergency Control Panel - - - -


A15.8.5.1. Engine Fire Bottle - - - -

A15.8.5.2. Aux power plant (APP) Fire Bottle - - - -

A15.8.5.3. Squib/ cartridge * - - - -

A15.8.5.4. Emergency Fire Control Panel - - - -

A15.8.6. Repair System Components - - - -



TR: 1H-53(M)J-2-6





252Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A15.9.4.1. Master Caution Panel - - - -

A15.9.4.2. Advisory Panel - - - -

A15.9.4.3. Master Caution Reset Light - - - -


A15.9.5.1. Master Caution Panel - - - -

A15.9.5.2. Advisory Panel - - - -

A15.9.5.3. Master Caution Reset Light - - - -




A15.10. FUEL SYSTEMS

TR: 1H-53(M)J-2-6


A15.10.1.1. In flight refueling (IFR) - - - -

A15.10.1.2. Ground Refuel and Transfer System - - - -

A15.10.1.3. Fuel Dump - - - -

A15.10.1.4. Aux Tank Jettison System - - - -


A15.10.2.1. In flight Refueling (IFR) - - - -

A15.10.2.2. Ground Refuel and Transfer System - - - -

A15.10.2.3. Fuel Dump - - - -


A15.10.3.1. Refuel Control Panel - - - -

A15.10.3.2. Extend Harness - - - -

A15.10.3.3. Retract Harness - - - -

A15.10.3.4. Bleed Air Selector Valve - - - -


A15.10.3.6. Dimming Control Unit - - - -


A15.10.4.1. Refuel Control Panel - - - -

A15.10.4.2. Extend Harness - - - -

A15.10.4.3. Retract Harness - - - -

A15.10.4.4. Bleed Air Selector Valve - - - -






253Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



TR: 1H-53(M)J-2-6



A15.11.2.1. Jet engine System - - - -


A15.11.3.1. Jet engine system - - - -





TR: 1H-53(M)J-2-6

A15.12.1. Operation Fundamentals - - - -




A15.12.4.1. Control Panel - - - -

A15.12.4.2. Anti-ice Controller - - - -


A15.12.5.1. Control Panel - - - -

A15.12.5.2. Anti-ice controller - - - -




A15.13. WINDSHIELD WIPER SYSTEMS

TR: 1H-53(M)J-2-6




A15.14. AUXILIARY POWER PLANT (APP) SYSTEM

TR: 1H-53(M)J-2-2, 1H-53(M)J-2-6





A15.14.4.1. APP control panel - - - -

A15.14.4.2. Volt Sensing Relay - - - -


254Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A15.14.4.3. Voltage Regulator - - - -


A15.14.5.1. APP control panel - - - -

A15.14.5.2. Volt Sensing Relay - - - -

A15.14.5.3. Voltage Regulator - - - -




A15.15. BLADE/PYLON FOLD SYSTEM

TR: 1H-53(M)J-2-4, 1H-53(M)J-2-6





A15.15.4.1. Logic Unit - - - -

A15.15.4.2. Blade Fold Relay Panel - - - -

A15.15.4.3. Slip Ring - - - -

A15.15.4.4. Proximity Harness - - - -

A15.15.4.5. Tail Rotor Head Actuator - - - -

A15.15.4.6. Blade /Fold Control Panel - - - -

A15.15.4.7. Interrupt Panel - - - -



A15.15.5.1. Logic Unit - - - -

A15.15.5.2. Blade Fold Relay Panel - - - -

A15.15.5.3. Slip Ring - - - -

A15.15.5.4. Proximity Harness - - - -

A15.15.5.5. Tail Rotor Head Actuator - - - -

A15.15.5.6. Blade /Fold Control Panel - - - -

A15.15.5.7. Interrupt Panel - - - -





A15.16. COMBUSTION HEATER SYSTEM

TR: 1H-53(M)J-2-1, 1H-53(M)J-2-6




255Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A15.16.4.1. Cabin Heater Control Panel - - - -

A15.16.4.2. Heater Relay Panel - - - -

A15.16.4.3. Heater Fuel Control - - - -

A15.16.4.4. Heater Can - - - -

A15.16.4.5. Pressure Switch - - - -

A15.16.4.6. Vent Blower - - - -

A15.16.4.7. Combustion Blower - - - -

A15.16.4.8. Ignition Unit - - - -


A15.16.5.1. Cabin Heater Control Panel - - - -

A15.16.5.2. Heater Relay Panel - - - -

A15.16.5.3. Heater Fuel Control - - - -

A15.16.5.4. Heater Can - - - -

A15.16.5.5. Pressure Switch - - - -

A15.16.5.6. Vent Blower - - - -

A15.16.5.7. Combustion Blower - - - -

A15.16.5.8. Ignition Unit - - - -




A15.16.9. Perform carbon monoxide check - - - -

A15.17. PARKING BRAKE SYSTEM

TR: 1H-53(M)J-2-4, 1H-53(M)J-2-6




A15.17.4. Remove limit Switches - - - -

A15.17.5. Install Limit Switches - - - -


A15.18. TAIL SKID SYSTEM

TR: 1H-53(M)J-2-6





A15.18.4.1. Tail Skid Relay panel - - - -


256Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A15.18.4.2. Actuator - - - -


A15.18.5.1. Tail Skid Relay panel - - - -

A15.18.5.2. Actuator - - - -




A15.19. IN-FLIGHT BLADE INSPECTION SYSTEM

TR: 1H-53(M)J-2-1, 1H-53(M)J-2-6





A15.19.4.1. Detector Assembly - - - -

A15.19.4.2. Signal Processor Assembly - - - -


A15.19.5.1. Detector Assembly - - - -

A15.19.5.2. Signal Processor Assembly - - - -




A15.20. ENGINE ANTI-ICE SYTEM

TR: 1H-53(M)J-2-2, 1H-53(M)J-2-6





A15.20.4.1. Control Panel - - - -

A15.20.4.2. Solenoid Sensing Relay - - - -


A15.20.5.1. Control Panel - - - -

A15.20.5.2. Solenoid Sensing Relay - - - -




A15.21. ENGINE OVERSPEED SYSTEM

TR: 1H-53(M)J-2-2, 1H-53(M)J-2-6



257Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC



A15.21.4. Remove Harness - - - -

A15.21.5. Install Harness - - - -


A15.22. ENGINE OIL SYSTEM

TR: 1H-53(M)J-2-2, 1H –53(M)J-2-6



A15.22.2.1. Oil Level System - - - -

A15.22.2.2. Oil Pressure System - - - -


A15.22.3.1. Oil Level System - - - -

A15.22.3.2. Oil Pressure System - - - -

A15.23. ENGINE AIR PARTICLE SEPERATOR (EAPS) SYSTEM

TR: 1H-53(M)J-2-1, 1H-53(M)J-2-6





A15.23.4.1. Blower - - - -

A15.23.4.2. Actuator - - - -


A15.23.5.1. Blower - - - -

A15.23.5.2. Actuator - - - -




A15.24. ROTOR BRAKE SYSTEM

TR: 1H-53(M)J-2-4, 1H-53(M)J-2-6




A15.24.4. Remove Master Switch Control Panel - - - -

A15.24.5. Install Master Switch Control Panel - - - -




258Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC

A15.24.8. Bench Check Components - - - -

A15.25. CHIP DETECTOR SYSTEM

TR: 1H-53(M)J-2-4, 1H-53(M)J-2-6





A15.25.4.1. Relay Panel - - - -

A15.25.4.2. Chip Locator Panel Assembly - - - -

A15.25.4.3. Chip Detector Locator Panel - - - -

A15.25.4.4. Power Module - - - -


A15.25.5.1. Relay Panel - - - -

A15.25.5.2. Chip Locator Panel Assembly - - - -

A15.25.5.3. Chip Detector Locator Panel - - - -

A15.25.5.4. Power Module - - - -




A15.26. HYDRAULIC PRESSURE WARNING SYSTEM

TR: 1H-53(M)J-2-4, 1H-53(M)J-2-6





A15.26.4.1. Servo Fail Relay Panel - - - -

A15.26.4.2. Servo Fail Advisory Panel - - - -


A15.26.5.1. Servo Fail Relay Panel - - - -

A15.26.5.2. Servo Fail Advisory Panel - - - -

A15.26.6 Inspect System Components - - - -



A15.27. RESCUE HOIST SYSTEM






259Attachment 15

2. CoreTasks



B5 Level

C7 Level

5 7 TngStart

TngComplete

TraineeInitials

TrainerInitials


(1)Course

(2)CDC


A15.28. VIBRATION MONITORING SYSTEM






CFETP 2A6X6 October 2002

260

SECTION B - COURSE OBJECTIVE LIST

4. Measurement. Each proficiency coded STS task or knowledge item taught at the technical school ismeasured through the use of an objective. An objective is a written instruction for the student so he or sheknows what is expected of them to successfully complete training on each task. Each objective is compressedof a condition, behavior, and standard which states what is expected of the student for each task. The conditionis the setting in which the training takes place (i.e. TOs, type of equipment, etc). The behavior is the observableportion of the objective (i.e. perform an operational check). The standard is the level of performance that ismeasured to ensure the STS proficiency code level is attained. Each objective uses letter codes(s) to identifyhow it is measured. All objectives use the PC code which indicates a progress check is used to measure subjector task knowledge. W indicates a comprehensive written test and is used to measure the subject or taskknowledge at the end of a block of instruction. PC/W indicates a subject or task knowledge progress check anda separate measurement of both knowledge and performance elements using a written test.

5. Standard. The standard of written examinations is 70% to 76%, depending on the number of questions onthe test. Standards for performance objectives are indicated in the objective and are also indicated on theindividual progress check checklist. The checklist is used by the instructor to document each student's progresson each task. Instructor assistance is provided as needed during the progress check, and students may berequired to repeat all or part of the behavior until satisfactory performance is attained. Students mustsatisfactorily complete al progress checks prior to taking the written test.

6. Proficiency Level. Review column 4A of the STS to determine the proficiency level of a particular task orknowledge item. Review the course objective list to determine which STS item the objective supports. Reviewthe proficiency code key in Part II, Section A of this CFETP for an explanation of the proficiency codes. Mosttask performance is taught to the ‘2b’ proficiency level which means the students can do most parts of the task,but does need assistance on the hardest parts of the task (partially proficient). The student can also determinestep-by-step procedures for doing the task

7. Course Objective List. A detailed listing of initial skills or craftsman course objectives may be obtained bysubmitting a written request to the school house Training Manager, 364 TRS/TRR, 511 9th Ave STE 1,Sheppard AFB TX, 76311-2338.


261

SECTION C - SUPPORT MATERIAL

8. The following list of support materials is not all-inclusive; however, it covers the most frequently referencedareas. For further information on the following courses, contact the OPR at:

333 TRS/TTCQS 782 TRG601 D Street 826 Avenue G Suite 4Keesler AFB, MS 39534-2229 Sheppard AFB, TX 76311-2867DSN 597-5893 DSN 736-2568

COURSE NUMBER COURSE TITLE DEVELOPER

*AFQTP 2EXXX-201L Workcenter Managers Handbook 333 TRS

*AFQTP 2EXXX-201LB C-E Managers Handbook 333 TRS

ECI Specialized Course 1200 Air Force Technical Orders 782 TRG

*AFQTP 2EXXX-201G Maintenance Support 333 TRS

*AFQTP 2EXXX-201P TMDE Management 333 TRS

*AFQTP 2EXXX-201J Maintenance Training Program 333 TRS*Courses can be downloaded from 333 TRS home page at: http://qflight.kee.aetc.af.mil


262

SECTION D - TRAINING COURSE INDEX

9. Purpose. This section of the CFETP identifies training courses available for the Electrical andEnvironmental Systems Specialty and shows how the courses are used by each MAJCOM in their career fieldtraining programs. For further information on the following courses, contact the OPR at:

364 TRS/TRR511 9th Ave STE 1Sheppard AFB, TX 76311-2338DSN 736-2772

10. Air Force In-Resident Courses.

COURSE NO. COURSE TITLE LOCATION USER

J3ABR2A636 008 Aircraft Electrical andEnvironmental Systems Apprentice

Sheppard AFB AF, FMS,ANGRC, AFRC

J3ACR2A676 000 Aircraft Electrical andEnvironmental Systems Craftsman

Sheppard AFB AF, ANGRC,AFRC

COURSE NO. COURSE TITLE LOCATION USER

J4AST2A6X6 061 Liquid Oxygen/Nitrogen StorageTanks

VariousLocations

AF, ANGRC,AFRC

11. Extension Course Institute (ECI) Courses.

364 TRS/TTMAS511 9th Ave STE 1Sheppard AFB, TX 76311-2338DSN 736-2772

COURSE NO. COURSE TITLE USER

CDC 2A656 Aircraft Electrical and Environmental Systems Journeyman AF

CDC 2A676 Aircraft Electrical and Environmental Systems Craftsman AF

CDC 2AX7X Aerospace Maintenance Craftsman AF


263

12. Exportable Courses.

For further information on the following exportable courses, contact the OPRs at:

367 TRSS 362 TRS6058 Aspen Ave 613 10th AveHill AFB, UT 84056-5805 Sheppard AFB, TX 76311-2352DSN 777-7830/8741 DSN 736-5206

The Hill AFB course catalog can be ordered from DSN 777-0160.

COURSE NO. COURSE TITLE OPR User

00TVT0000 FOD Prevention (VHS tape) 367 TRSS AF

00TVT0001 Safety and Radio Frequency (RF) Radiation(VHS tape)

367 TRSS AF

00TVT0001V1 Troubleshooting Techniques (ICW) 367 TRSS AF

00TTV0002 Aerospace Ground Equipment Training (ICW) 367 TRSS AF

00TCB0002V1 Multimeter Familiarization (ICW) 367 TRSS AF

00TIV0007 Potential Hazards of Oxygen EnrichedEnvironments (VHS tape)

367 TRSS AF

00CIV0008 Use and Care of Type III Torque Wrenches(ICW)

367 TRSS AF

00CVT0009 Torque Wrench, Use and Care (VHS tape) 367 TRSS AF

00TVT0011 Cold Weather Indoctrination (VHS tape) 367 TRSS AF

00CVT0012 Manual Acft Snow Removal (VHS tape) 367 TRSS AF

00TVT0017V1 General Aircraft Corrosion Control (VHS tape) 367 TRSS AF

00TIV1000 Aircraft Marshaling (ICW) 367 TRSS AF

01SIV8971V5.1.1 -86 Diesel Power Unit Operation (ICW) 367 TRSS AF

00SIV8972 MA-3D Air Conditioner Operation (ICW) 367 TRSS AF

00TVT0015 Installation of Aircraft Switch Guards 367 TRSS AF

01CIV0016 B-1B Emergency Ground Egress 367 TRSS AF

01CIV0051 B-1B Command Aircraft Systems Training(CAST) General Airplane Information

367 TRSS AF

01CIV0052 B-1B Hazardous Zones 367 TRSS AF

01CIV1001 B-1B Safe for Maintenance 367 TRSS AF

01CIV1615 B-1B Egress System Safety 367 TRSS AF


264


01JIV0001 B-1B General Electrical Maintenance, part 1 367 TRSS AF



01JIV0005 B-1B CITS Parameter Monitor Codes (PMC) 367 TRSS AF

01JIV0006 B-1B CITS Maintenance Codes 367 TRSS AF

01JIV0038 B-1B Hardness Critical Procedures (HCP)Check

367 TRSS AF

01JIV1100 B-1B Panel Types, Location, and Construction 367 TRSS AF

01JIV1101 B-1B Panel and Secondary Structure Inspection 367 TRSS AF

01JIV1103 B-1B Forward Equipment Bay (FEB) Panels 367 TRSS AF

01JIV1134 B-1B Fasteners/Related Hardware 367 TRSS AF

01JIV2301 B-1B CAST Aircraft Systems and Power Plant 367 TRSS AF

01JIV4300 B-1B EMUX 367 TRSS AF

01JIV5500 B-1B CAST CITS/EMUX 367 TRSS AF

01JIV5501 B-1B Ground Readiness Tests (GRT) 367 TRSS AF

01SIV1005 B-1B Proximity Switch (Cover/Uncover)Simulated Airborne Conditions

367 TRSS AF

01SIV2400 B-1B Auxiliary Power Unit Operation 367 TRSS AF

05IIV2401 C-5 Fire Warning and Overheat System 367 TRSS AF

05IIV3201 C-5 Anti-Skid Detection System 367 TRSS AF

05TIV1300 C-5 Landing Gear T/S and Maintenance 367 TRSS AF

05TIV1301 C-5 Landing Gear Rigging 367 TRSS AF

10CVT0001 KC-10 Emergency Ground Egress 367 TRSS AF

10TIV4600 KC-10 Air Refueling System T/S andMaintenance

367 TRSS AF

15AIV1301 F-15 Landing Gear T/S and Maintenance 367 TRSS AF

15AIV2400 F-15 Secondary Power T/S and Maintenance 367 TRSS AF

15AIV2401 F-15 Secondary Power System Advanced T/S 367 TRSS AF

15MIV23KC F-15E Engine Ignition System 367 TRSS AF

15TIV23K1 F-100 Engine Ignition System T/S 367 TRSS AF


265


16AIV1301 F-16 C/D Landing Gear System T/S andMaintenance

367 TRSS AF

16AIV1302 F-16 C/D Block 50 Landing Gear System T/Sand Maintenance

367 TRSS AF

16AIV1401 F-16 C/D Block 40 Advanced Flight ControlSystem T/S

367 TRSS AF

16AIV24A1 F-16 C/D Emergency Power Unit System T/Sand Maintenance

367 TRSS AF

16AIV24D0 F-16 C/D Engine Start System T/S 367 TRSS AF

16GIV1401 F-16 C/D Block 40 Digital Flight ControlSystem T/S

367 TRSS AF

16GIV2400 F-16 C/D Electrical System T/S andMaintenance

367 TRSS AF

16GIV2402 F-16 C/D Block 50 Electrical System T/S andMaintenance

367 TRSS AF

16GIV4101 F-16 C/D ECS T/S and Maintenance 367 TRSS AF

16TIV1402 F-16 C/D Block 50 Advanced Flight ControlSystem T/S

367 TRSS AF

16TIV1403 F-16 C/D Block 50 Digital Flight ControlSystem T/S

367 TRSS AF

16TIV24A2 F-16 C/D Block 50 Emergency Power UnitSystem T/S and Maintenance

367 TRSS AF

16TIV24D0 F-16 C/D Block 50 Engine Start System T/S 367 TRSS AF

16TIV3202 F-16 C/D Block 50 Anti-Skid and Brake SystemT/S

367 TRSS AF

16TIV4102 F-16 C/D Block 50 ECS T/S and Maintenance 367 TRSS AF

30TIT0001 C-130 Emergency Escape 367 TRSS AF

30TIV0001 C-130 Safe For Maintenance 367 TRSS AF

35CVT0001 C-135 Emergency Ground Egress Procedures 367 TRSS AF

35TIV4100 KC-135R Bleed Air 367 TRSS AF

35TIV4670 KC-135R Air Refueling System 367 TRSS AF

41TIV1410V1 C-141B Secondary Flight Controls System(Flaps and Spoilers)

367 TRSS AF

41UIV11B1 C-141 Cargo Doors and Ramp Operation 367 TRSS AF

52CVT0003 B-52H Emergency Ground Egress 367 TRSS AF

52TVT1202 B-52H Seat Safety 367 TRSS AF

J6AZU2E066 038 Air Force Technical Order (T.O.) System (Gen) 362 TRS AF

J6AZU2E066 039 Air Force Technical Order (T.O.) System (Gen)(Adv)

362 TRS AF


266


J6ANU00066 043 CAMS For Flightline and Backshop 362 TRS AF


267

13. Training Detachment (TD) Courses.

For further information on the TD courses, contact the OPRs at:

372 TRS 373 TRS912 I Ave Suite 3 912 I Ave Suite 4Sheppard AFB, TX 76311-2361 Sheppard AFB, TX 76311-2362DSN 736-4801 DSN 736-4679

COURSE NO.

J4AMF/ASF/AST:

COURSE TITLE OPR USER

2A6X6-001 Acft Elect Systems Spec (E-3) 373 TRS AF

2A6X6-004 A-10A Acft Elect Systems 372 TRS AF

2A6X6-005 C-5 Elect Systems Tech (Primary) 373 TRS AF

2A6X6-006 C-5 Elect Systems Technicians (Airframe Systems) 373 TRS AF

2A6X6-007 F-16 Tactical E & E System Technician (ElectricalOnly, C/D/Difference)

372 TRS AF

2A6X6-008 F-16 Tactical E & E System Technician(Environmental Only, C/D/Difference)

372 TRS AF

2A6X6-011 F-16 Tactical E & E System Technician (C/DEnvironmental Only)

372 TRS AF

2A6X6-012 F-16 Tactical E & E System Technician (C/DElectrical Only)

372 TRS AF

2A6X6-014 H-60 Elect Systems Technician (O Maint) 373 TRS AF

2A6X6-015 B-52 G/H Acft E & E Systems Craftsman 373 TRS AF

2A6X6-017 F-15 Tactical Acft E & E SystemsJourneyman/Craftsman (Electrics Only)

372 TRS AF

2A6X6-018 F-15 Acft E & E Systems Craftsman (ECS Only) 372 TRS AF

2A6X6-019 Acft Environmental Systems O Maintenance (E-3) 373 TRS AF

2A6X6-020 A-10A ECS 372 TRS AF

2A6X6-021 T-37 E & E Technician 372 TRS AF

2A6X6-022 T-38 E & E Systems Technician 372 TRS AF

2A6X6-024 T-1A E & E Systems 372 TRS AF

2A6X6-026 KC-135R E & E Technician 373 TRS AF

2A6X6-028 KC-10A E & E Systems Technician 373 TRS AF


268

COURSE NO.

J4AMF/ASF/AST:

COURSE TITLE OPR USER

2A6X6-031 U-2R Strategic E & E Systems 373 TRS AF

2A6X6-032 B-2 Acft Environmental Systems Craftsman 373 TRS AF

2A6X6-033 RC-135( ) E & E Technician 373 TRS AF

2A6X6-034 EC-135C/J E & E Technician 373 TRS AF

2A6X6-035 EC-130H Special Sys Air Conditioning System 373 TRS AF

2A6X6-036 H-53 Helicopter Electrical Repair Technician 373 TRS AF

2A6X6-037 C-141 Acft Electrical System Technician (OMaintenance)

373 TRS AF

2A6X6-038 C-141 Environmental Systems Technician 373 TRS AF

2A6X6-039 C-5 Environmental Systems Technician (Bleed AirAnd Oxygen System)

373 TRS AF

2A6X6-040 C-130B/E/H Electrical Systems Technician 373 TRS AF

2A6X6-041 C-130B/E/H Environmental Systems Technician 373 TRS AF

2A6X6-044 C-17A E&E System Technician 373 TRS AF

2A6X6-045 C-130 (SOF) E & E Systems Technician 373 TRS AF

2A6X6-046 KC-135 E & E Technician 373 TRS AF

2A6X6-052 C-5 Environmental System Technician (FireSuppression System)

373 TRS AF

2A6X6-058 B-1B E & E Systems Craftsman 373 TRS AF

2A6X6-059 F-15E Tactical Acft E&E System Maintenance(Electrics only)

372 TRS AF

2A6X6-060 F-15E Tactical Acft E&E System Maintenance(ECS only)

372 TRS AF

2A6X6-062 C-17A Flotation Deployment System (FEDS) 373 TRS AF

2A6X6-063 F-117A Acft E&E System Journeyman 372 TRS AF

2A6X6-064 B-2 Acft E&E System Craftsman 373 TRS AF

2A6X6-066 E-8C E&E Technician 373 TRS AF

2A6X6-067 C-5 Electrical System (Utility) 373 TRS AF

14. Courses Under Development/Revision. N/A


269

SECTION E - MAJCOM UNIQUE REQUIREMENTS.

15. MAJCOM Courses. Contact the course OPRs at:

HQ ACC LSG / OL-CA6058 AspenHill AFB, UT 84056-5805DSN 777-4278

COURSE NO. COURSE TITLE OPR USER

Y140009 ACC Production Superintendent HQACC/LSG

ACC

Y140015 ACC Maintenance Instructor HQACC/LSG

ACC

Y140020 ACC Maintenance Training Management HQACC/LSG

ACC