aftermarket tractor,skidsteer & wheel loader attachments

SEQ. #416-1118 MINNESOTA PRICING PAGESTitan MachineryMB Attachments

November, 2018

Titan MachineryMB Attachments of 2

Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Vendor Name: Titan Machinery IncContact Person: Andy BethelStreet Address: 644 East Beaton Drive

P.O. Box:City, State, Zip West Fargo, ND

Phone #: 952-445-5400Toll Free #: 800-795-9274

Fax #: 952-445-0365Email Address: [email protected]

8.0 Manufacturer's Name

9.0 Attachment Description

10.0 Warranty Term (months, years)

11.0 Percent Discount (%) to be applied to Price List

11.1 Date & I.D. of Price List

12.1 Delivery ChargesDELIVERY STARTING POINT (City) New Holstein

(State, Zip Code)

12.2 Price per loaded mile

13.0 Price for additional Service Manual

13.1 Price for additional Parts Manual

14.0 Installation Services: Per Hour (Shop Labor Rate)Installation services may be requested on an"as needed" basis. (See Special Terms and Conditions)

$ 125.00

M-B Compaines Inc

All Attachments

1 Year

8%

6/2016 - MB Pricing

NO FLAT RATE ALLOWED

WI, 53061

$ 2.00

Included

Included

mailto:[email protected]

SEQ. #416-1118 MINNESOTA PRICING PAGESTitan MachineryMB Attachments

November, 2018

Titan Machinery MB Attachments

Authorized Distributer List of 2

RESPONDER'S NAME: Titan Machinery

SWIFT EVENT NUMBER: AFTERMARKET TRACTOR/SKIDSTEER ATTACHMENTS, T-632(5) Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will providethe required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions beforeany State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., 0000123456-001.

COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAMETitan Machinery Inc. 251892 18 6340 County Road 101 E, Shakopee MN, 55379 952-445-5400 Andy BethelTitan Machinery Inc. 251892 6 4001 38th Street SW, Fargo ND, 54108 701-237-3333 Sam ChristiansonTitan Machinery Inc. 251892 10 500 Ingersoll Ave, Crookston MN, 56716 218-281-4668 Kraig RyggTitan Machinery Inc. 251892 19 4311 Haines Road, Hermantown MN, 55811 218-727-3038 Ben PiasTitan Machinery Inc. 251892 17 14375 James Road, Rogers MN, 55374 763-428-5099 Andy BethelTitan Machinery Inc. 251892 2 1201 North Hwy 59, Marshall MN, 56258 507-532-5783 Lucas HilgemannTitan Machinery Inc. 251892 5 4400W 62nd St N. Sioux Falls SD, 57104 605-336-3434 Matt LeightonTitan Machinery Inc. 251892 20 N 1626 Wuensch Road, La Crosse WI, 54601 608-788-1025 Jesse Schmidt

Prices starting at for standard model

Available OptionsBroom Width 6-foot (72”) Broom - add $130 7-foot (84”) Broom - add $250 8-foot (96”) Broom - add $380 9-foot (108”) Broom - add $500

Brush Filament Poly (Polypropylene) - add $0

Rotation Direction Sweep away from tractor - add $0 Sweep towards tractor - add $0

Method of Swing Mechanical Swing - add $0

Optional Equipment Deflector (number of feet needed x $30/ft) - cost varies 45 Gallon Sprinkler System (Customer provides tank mounting location) - add $1,290 12 Volt 24 Volt Sight Indicators - add $80

Part Number Description 203-72277 Cylinder, Swing - $325.50 380-76379 Clevis Pin, Storage Stand - $4.00 380-84739 Hair Clip, Clevis Pin - $2.51 400-64724 End Disc, Core - $31.95 410-132762 Pin, Swing - $21.54 410-93200 Hub, Core Support - $198.96 410-94050 Storage Stand - $39.90 600-140187 Bearing, Support, Core Drive Jackshaft - $49.25 600-68509 Bearing, Support, Core - $42.24

Total Cost $____________

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

$6,880**Standard model ARMTHydraulic Broom for Tractors5-foot (60”) BroomPoly/Wire BrushHydraulic SwingM-B YellowCategory I or Category II Three Point Tractor Mount


Available OptionsBroom Width 6-foot (72”) Broom with 15.8 cu. ft. Hopper - add $200 7-foot (84”) Broom with 18.2 cu. ft. Hopper - add $400

Brush Filament Poly (Polypropylene) - add $0

Dual Motor Size Low Flow (8 - 11 GPM) - add $100

Optional Equipment 45 Gallon Sprinkler System (Customer provides tank mounting location) - add $1,290 12 Volt 24 Volt Gutter broom, single - add $1,675 (Mounted on swing away bracket assembly. Brush driven by hydraulic motor with adjustable flow control for variable speed, independent of main brush. Flat wire bristles) Left Side Right Side Second Gutter Broom - add $1,285 (Right side and left side gutter brooms as described above in single gutter broom, plumbed in series with single flow control for variable speed, independent of main brush) Sight Indicators - add $80

Part Number Description 101-132287 Deflector, Front, 6’ - $103.17 101-132288 Deflector, Side - $55.56 101-132404 Deflector, Front, 7’ - $120.36 101-132504 Deflector, Front, 5’ - $85.98 201-75209 Hyd. Motor 18.3cu.in. - $793.56 401-124590 5’ Bucket Edge - $286.50 401-126573 Motor Guard - $91.25 401-126610 7’ Bucket Edge - $230.25 402-125304 6’ Bucket Edge - $215.75 410-126551 Adjustment Bracket - $95.55 410-93199 Splined Hub - $93.40 600-90327 Flange Bearing - $45.96

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

*Standard model FLBHydraulic Pick Up Broom for Loaders5-foot (60”) Broom with 13.2 cu. ft. HopperPoly/Wire BrushStandard Single Motor (12 to 20 GPM)M-B YellowStandard Skid Steer Quick Coupler with hoses and couplers

$4,180*


Available OptionsBlower Width 7-foot (84”) Blower - add $250 8-foot (96”) Blower - add $450

Hydraulic Hose Kit Hose Kit with Flat Face Coupler (customer must specify coupler size needed) - add $350

Mounting Kit Custom Mount Design Fee - add $2,500

Optional Equipment Truck loading chute - add $3,500

Part Number Description 104-147061 Shoe, Skid - $68.20 202-190105 Hydraulic Motor, Impeller with Manifold - $1994.51 201-143096 Hydraulic Motor, Chute Rotation - $290.75 201-147737 Hydraulic Motor, Auger - $689.64 101-176453 Cutting Edge, 72” - $191.73

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

$12,250*Standard model HC-SNBSnowblower for Loaders6-foot (72”) BlowerControl Box and HarnessStandard skid steer quick couplerHydraulic Deflector Black

*


Available OptionsBlower Width 72” Blower - add $100 78” Blower - add $150 84” Blower - add $200Hydraulic Hose Kit Hose Kit with Flat Face Disconnects (skid steer application) - add $245 Mounting Kit Custom Mount Design Fee - add $2,500Optional Equipment Truck loading chute (overall height of chute and blower is 135”) - TBD Hydraulic chute deflector - add $300 Independent Hydraulic system (IHS) - add $2,100 (Includes rear 540 PTO, hydraulic pump, relief valve, 3-point hydraulic reservoir and hoses to blower) Required if tractor/loader auxiliary hydraulic system cannot supply 21 GPM @ 2,000 psi IHS Options: Tank Location Front (Tank mounts on broom mounting frame) - TBD Sight Indicators - add $80

Part Number Description 104-147061 Shoe, Skid - $68.20 201-143083 Hydraulic Motor, Impeller - $652.37 201-143096 Hydraulic Motor, Chute Rotation - $290.75 201-147189 Hydraulic Motor, Auger(16-22 GPM) - $735.00 201-147736 Hydraulic Motor, Auger (14-16 GPM) - $689.64 201-147737 Hydraulic Motor, Auger (20-27 GPM) - $689.64 203-143068 Hydraulic Cylinder, Chute Deflector - $171.20 401-143058 Cutting Edge, 66” - $118.16 401-143172 Cutting Edge, 78” - $143.77 401-143904 Cutting Edge, 72” - $124.90 401-143905 Cutting Edge, 84” - $150.39 600-143122 Bearing, Auger Support - $47.89

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

$8,850*Standard model HD-SNBSnowblower for Loaders66” BlowerControl Box and HarnessStandard skid steer quick coupler Black

*


Available OptionsBroom Width 6-foot (72”) Broom - add $100 7-foot (84”) Broom - add $200 8-foot (96” dual motors, 25-45 GPM) Broom - add $825Brush Filament Poly (Polypropylene) - add $0Motor Size5-7 foot HL Optional Dual Motor (25 - 45 GPM; 9000 in.lbs torque) - add $525 Low Flow (8 - 11 GPM) - add $100 Dual Low Flow (15 - 24 GPM; 6400 in.lbs torque) - add $6758 foot HL Low Flow (15 - 24 GPM; 6400 in.lbs torque) - add $200Method of Swing Electric/Hydraulic Swing (non-reversable) - add $1,225 (Valve, swing cylinder, control box with harness,and swing cylinder hoses, MAX 40GPM) Electric/Hydraulic Skid Steer Harness (customer to supply PIN OUT diagram) - add $1,300 (Valve, swing cylinder, custom wire harness and swing cylinder hoses, MAX 40GPM) Bobcat 7 Pin (non-reversable) - add $2,000 (Valve, swing cylinder, wire harness, and swing cylinder hoses, MAX 40 GPM) Loader Mounting Kit No Mounting (Mounting provided by customer) - subtract $100 Pin On Mount (Only applies if previously designed by MB) - add $1,000 Custom Mount Design Fee - add $2,500Independent Hydraulic system (IHS) Independent Hydraulic system (IHS) - add $2,100 (Includes rear 540 PTO hydraulic pump, relief valve, 3-point hydraulic reservoir and hoses to broom) Required if tractor/loader auxiliary hydraulic system cannot supply 8 GPM @ 2,000 psi IHS Options: Tank Location Front (Tank mounts on broom mounting frame) - add $150Optional Equipment Deflector (number of feet needed x $30/ft) - cost varies 45 Gallon Sprinkler System (mounted on the brush hood) 12 Volt - add $1,290 150 Gallon Three-Point Mount Sprinkler System 12 Volt - add $2,180 Hose Kit (skid steer application) - add $235 Sight Indicators - add $80 Oil Cooler with Fan (available for dual motor brooms) - add $950

Part Number Description 201-169353 Hyd. Motor, 14 Spline 18.3 cu.in. - $726.56 203-72277 Swing Cylinder - $325.50 400-64724 End Disc, Core - $31.95 401-169363 Motor Guard - $53.25

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

$5,450*Standard model HLHydraulic Broom for Loaders5-foot (60”) BroomPoly/Wire BrushStandard Single Motor (12 to 20 GPM)Hydraulic Swing Cylinder ONLYM-B YellowStandard Skid Steer Quick Coupler

*

410-132762 Swing Pin - $21.54 410-169418 Hub, Drive 14 Tooth - $96.62 410-94050 Storage Stand - $39.90 600-169345 Pillow Block Bearing 1-3/4” ID - $60.81


Available OptionsBroom Width 7-foot (84”) Broom - subtract $370 8-foot (96” dual motors) Broom - add $1,305Brush Filament Poly (Polypropylene) - add $0Motor Size6-7 foot Standard Single Motor (for prime mover with 12 to 20 GPM) - add $0 Optional Dual Motor (25 - 45 GPM) - add $525 Low Flow (8 - 11 GPM) - add $100 Dual Low Flow (15 - 24 GPM) - add $6758 foot Standard Dual Motor (for prime mover with 25 to 45 GPM) - add $0 Low Flow (15 - 24 GPM) - add $200Method of Swing Manual Swing - add $0 Electric/Hydraulic Swing (Valve and control box actuate the swing cylinder) - add $1,225 Loader Mounting Kit No Mounting (Mounting provided by customer) - subtract $100 Quick Coupler Mounting for loaders (Does not include cost of coupler) (Hook and Pin) - add $1,000 Mounting Frame with Pin-on ears (Customer may be required to provide dimensions) (Pin only) - add $1,000 Custom Mount Design Fee - add $2,500 Independent Hydraulic system (IHS) Independent Hydraulic system (IHS) - add $2,100

(Includes rear 540 PTO, hydraulic pump, relief valve, 3-point hydraulic reservoir and hoses to broom) Required if tractor/loader auxiliary hydraulic system cannot supply 8 GPM @ 2,000 psi IHS Options: Tank Location Front (Tank mounts on broom mounting frame) - add $150Optional Equipment Deflector (number of feet needed x $30/ft) - cost varies 45 Gallon Sprinkler System (Customer provides tank mounting location) - add $1,290 12 Volt 24 Volt 150 Gallon Three-point Mount Sprinkler System - add $2,180 (cannot be used with three-point hydraulic tank) Sight Indicators - add $80

Part Number Description 201-169353 Hydraulic Motor (Standard Flow) - $726.56 201-169657 Hydraulic Motor (Low Flow) - $643.39 201-169532 Shaft - $232.55 201-92039 Seal Kit - $89.20 601-150722 Kit, Bearings, Seals, Spacers - $30.69 203-142346 Cylinder, Swing - $245.85 380-150742 Pin, Swing - $10.23 203-142346 Cylinder, Lift - $245.85 600-169345 Bearing, Pillow Block 1-3/4 I.D. - $60.81

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

$7,040*Standard model HLPHydraulic Broom for Loaders6-foot (72”) BroomPoly/Wire BrushStandard Dual Motor (25 to 45 GPM)Hydraulic Swing - fourth function valve requiredM-B YellowStandard Skid Steer Quick Coupler

*


Available OptionsBroom Width 6-foot (72”) Broom with 14.3 cu. ft. Hopperr - add $190 7-foot (84”) Broom with 16.1 cu. ft. Hopper - add $380 8-foot (96” dual motor) Broom with 18.3 cu. ft. Hopper - add $855Brush Filament Poly (Polypropylene) - add $0Motor Size Low Flow (8 - 11 GPM) - add $100Optional Dual Motor Size Standard (for prime mover with 25 to 45 GPM) - add $500 Low Flow (for prime mover with 15 to 24 GPM) - add $650Loader Mounting Kit (please inquire if your coupler style is not shown) Mounting Frame with Pin-on Ears - add $2,700 Euro Coupler - add $0 Quick Attach Frame with ACS Pro or Caterpillar Coupler - add $2,200 Quick Attach Frame with JRB Coupler - add $1,500 Quick Attach Frame with FFC Coupler (Customer may be required to provide dimensions) - add $1,500 Quick Attach Frame with Volvo Coupler None (blank bucket) Custom Mount Design Fee (Actual cost of coupler will be based after design) - add $2,500Independent Hydraulic system (IHS) Independent Hydraulic system (IHS) - add $2,100

(Includes rear 540 PTO, hydraulic pump, relief valve, 3-point hydraulic reservoir and hoses to broom) Required if tractor/loader auxiliary hydraulic system cannot supply 8 GPM @ 2,000 psi IHS Options: Tank Location Front Tank (mounts on broom mounting frame) - add $150 Optional Equipment 45 Gallon Sprinkler System (mounted on the brush hood) - add $1,290 12 Volt 24 Volt 150 Gallon Sprinkler System (Customer provides tank mounting location) - add $2,180 12 Volt 24 Volt Cannot be mounted on hood Gutter broom, single - add $1,675 (Mounted on swing away bracket assembly. Brush driven by hydraulic motor with adjustable flow control for variable speed, independent of main brush. Flat wire bristles.) Left Side Right Side Second Gutter Broom - add $1,285 (Right side and left side gutter brooms as described above in single gutter broom, plumbed in series with single flow control for variable speed, independent of main brush) Hydraulic Dump (Dumps by reversing hydraulic flow) - add $350 Sight Indicators - add $80

Part Number Description 100-132132 Caster Wheel - $120.14 201-75209 Hydraulic Motor, Brush Rotation (Std. Flow) - $793.56 201-75649 Hydraulic Motor, Brush Rotation (Low Flow) - $824.20 201-92028 Shaft, Brush Motor (Std. and Low Flow) - $225.50 201-92039 Seal Kit, Brush Motor (Std. and Low Flow) - $89.20 203-142346 Cylinder, Bucket Dump (optional) - $245.85 380-140902 Pin, Clevis, Dump Cylinder - $10.41 380-92033 Hair Pin, Hitch Pin - $2.69 383-143534 Pin, Hitch, Bucket (w/Hydraulic Bucket Dump) - $38.19 401-124590 Edge, Bucket, 5’ - $286.50 401-126573 Guard, Brush Motor - $91.25 401-126610 Edge, Bucket, 7’ - $230.25 401-143404 Edge, Bucket, 8’ - $505.75

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

*Standard model LBHydraulic Pick Up Broom for Loaders5-foot (60”) Broom with 12 cu. ft. HopperPoly/Wire BrushStandard Single Motor (12 to 20 GPM)M-B YellowStandard Skid Steer Quick Coupler

$5,600

402-125304 Edge, Bucket, 6’ - $215.75 402-143658 Edge, Bucket, 4’ - $495.00 402-93754 Disc, Wafer Retainer - $21.30 410-93199 Hub, Splined, Core Support - $93.40 410-93793 Pin, Hitch, Bucket

(w/o Hyd. Bucket Dump) - $20.80 600-90327 Bearing, Core Hub Support - $45.96


Available OptionsBroom Width 8-foot (96”) Broom with 37.5 cu. ft. Hopper - add $1,355 9-foot (108”) Broom with 42 cu. ft. Hopper - add $2,445Note: Pin and/or quick-attach mountings for most popular applications. Some loaders with quick-attach buckets will require customer to provide female quick-attach. Consult factory. Note: Prices do not include hydraulic valve(s) on prime mover. Brush on/off with tractor/loader valve. Brush Filament Poly (Polypropylene) - add $0Dual Motor Size Low Flow (15 - 24 GPM) - add $200Loader Mounting Kit (please inquire if your coupler style is not shown) Quick Attach From with ACS Pro 2000 or CAT Fusion - add $3,400 Quick Attach Frame with JRB Coupler - add $2,900 Quick Attach Frame with Volvo Coupler or Cat IT - add $2,200 Mounting Frame with Pin-on Ears (Customer may be required to provide dimensions) - add $1,500 Custom Mount Design Fee (Actual cost of coupler will be based after design) - add $2,500Optional Equipment 45 Gallon Sprinkler System (Customer provides tank mounting location) - add $1,290 12 Volt 24 Volt 150 Gallon Sprinkler System (Customer provides tank mounting location) - add $2,180 12 Volt 24 Volt Cannot be mounted on hood Gutter broom, single - add $2,390 (Mounted on swing away bracket assembly. Brush driven by hydraulic motor with adjustable flow control for variable speed, independent of main brush. Flat wire bristles.) Second Gutter Broom - add $2,190

(Right side and left side gutter brooms as described above in single gutter broom, plumbed in series with single flow

Part Number Description 100-75970 Tire/Wheel 4.80 X 8 2 PLY - $156.22 100-92025 Tire/Wheel 2.80-4 4 PLY - $96.40 101-147228 Deflector, 9FT - $104.08 101-92117 Dirt Shoe - $139.37 101-92142 Deflector, 8FT - $114.60 101-92143 Deflector, 7FT - $138.16 201-75209 Hyd. Motor 18.3cu.in. - $793.56 203-92093 Hydraulic Cylinder - $255.60 402-93739 Guard, Motor, LH - $124.56 402-93740 Guard, Motor, RH - $127.42 410-92404 Storage Stand - $134.33 410-92416 Caster Fork - 2.80-4 - $144.59 410-93207 Caster Fork - 4.80-8 - $503.78 600-90327 Flange Bearing - $45.96

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

*Standard model LLBHydraulic Pick Up Broom for Loaders7-foot (84”) Broom with 33 cu. ft. HopperPoly/Wire BrushStandard Dual Motor (25 to 45 GPM)M-B YellowBlank Bucket

$19,308*


Available OptionsBroom Width 7-foot (84”) Broom - add $162 8-foot (96”dual motors; 25-40 GPM) Broom - add $862Brush Filament Poly (Polypropylene) - add $0Motor Size6-7 Foot Optional Dual Motor (for prime mover with 25 to 40 GPM) - add $525 Low Flow (for prime mover with 8 to 11 GPM) - add $100 Dual Low Flow (for prime mover with 15 to 24 GPM) - add $7258 Foot Low Flow (for prime mover with 15 to 24 GPM) - add $200Method of Swing Manual Swing - add $0 Electric/Hydraulic Swing (Valve and control box actuate the swing cylinder) Max 30 GPM - add $1,025 Independent Hydraulic system (IHS) Independent Hydraulic system (IHS) - add $2,100

(Includes Rear 540 PTO hydraulic pump, relief valve, 3-point hydraulic reservoir and hoses to broom) Required if tractor/loader auxiliary hydraulic system cannot supply 8 GPM @ 2,000 psi IHS Options: Tank Location Rear Tank (mounts on broom mounting frame) - base IHS priceOptional Equipment Deflector (number of feet needed x $30/ft) - cost varies 45 Gallon Sprinkler System (Customer provides tank mounting location) - add $1,290 12 Volt 24 Volt

Part Number Description 201-75209 Hydraulic Motor (Std. Flow) - $793.56 201-75649 Hydraulic Motor (Low Flow) - $824.20 203-142346 Swing Cylinder - $245.85 400-64724 Disc End, Core - $31.95 401-132066 Motor Guard - $53.25 410-93199 Splined Hub - $93.40 410-94050 Storage Stand - $39.90 600-68509 Pillow Block Bearing 1-7/16” ID - $42.24

Total Cost $____________

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

$5,738**Standard model RHTHydraulic Rear Broom for Tractors6-foot (72”) BroomPoly/Wire BrushSingle Single Motor (12 to 20 GPM)Hydraulic Swing M-B YellowCategory I or II Three Point Tractor Mount


Available OptionsBroom Width

5-foot (60”) Broom - add $1506-foot (72”) Broom - add $2507-foot (84”) Broom - add $450

Brush Filament Poly (Polypropylene) - add $0Motor Size Low Flow (8 - 11 GPM) - add $100Method of Swing Electric/Hydraulic Swing (non-reversable) - add $1,225

(Valve, swing cylinder, control box with harness,and swing cylinder hoses, MAX 40GPM) Electric/Hydraulic Skid Steer Harness (customer to supply PIN OUT diagram) - add $1,300 (Valve, swing cylinder, custom wire harness and swing cylinder hoses, MAX 40GPM) Bobcat 7 Pin (non-reversable) - add $1,600 (Valve, swing cylinder, wire harness, and swing cylinder hoses, MAX 40 GPM) Loader Mounting Kit No Mounting (Mounting provided by customer) - subtract $100 Pin On Mount (Only applies if previously designed by M-B) - add $1,000 Mini Skid Steer (Toro Dingo) - add $0 Custom Mount Design Fee - add $2,500Independent Hydraulic system (IHS) Independent Hydraulic system (IHS) - add $2,100

(Includes rear 540 PTO, hydraulic pump, relief valve, 3-point hydraulic reservoir and hoses to broom) Required if tractor/loader auxiliary hydraulic system cannot supply 8 GPM @ 2,000 psi IHS Options: Tank Location Front (Tank mounts on broom mounting frame) - add $150Optional Equipment

24 Volt - add $1,290 Deflector (number of feet needed x $30/ft) - cost varies 45 Gallon Sprinkler System (can not be mounted on the brush hood) Hose Kit (skid steer application) - add $235

Part Number Description 100-132340 Pin, Swing - $12.16201-75209 Hydraulic Motor, Standard Flow - $793.56201-75649 Hydraulic Motor, Low Flow - $824.20201-92028 Shaft, Hydraulic Motor - $225.50203-92074 Cylinder, Swing - $211.52401-132066 Guard, Motor - $53.25402-93754 End Disc, Core - $21.30410-93199 Hub, Splined, Core Support - $93.40410-94050 Storage Stand - $39.90600-68509 Bearing, Core Hub Support - $42.24

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

$4,375*Standard model SHLHydraulic Broom for Loaders4-foot (48”) BroomPoly/Wire BrushStandard Single Motor (12 to 20 GPM)Hydraulic SwingM-B YellowStandard Skid Steer Quick Coupler

*

12 Volt


Total Cost $____________

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

*Standard model TKH-THydraulic Broom for Tractors7-foot (84”) Broom Poly/Wire BrushStandard Dual Motor (28 to 40 GPM)Hydraulic Swing Cylinder ONLYCategory I or II Three Point Hitch

$10,884*

Available OptionsBroom Width 8-foot (96”) Broom - add $124 9-foot (108”) Broom - add $248 10-foot (120”) Broom - add $372 11-foot (132”) Broom - add $838 12-foot (144”) Broom - add $962Brush Filament Poly (Polypropylene) - add $0Dual Motor Size Low Flow (16 - 24 GPM) - add $200Method of Swing (Typically operated by tractor controls) Electric/Hydraulic Swing- add $1,225 (Valve and control box with harness; MAX 40GPM)Mounting Kit Custom Mount Design Fee (Actual cost of mount will be based after design) - add $2,500Optional Equipment Deflector (number of feet needed x $30/ft) - cost varies Spary Bary Only with Nozzles (number of feet needed x $45/ft) - cost varies 150 Gallon Three-Point Mount Sprinkler System - add $2,180 (Cannot be mounted to brush hood or used with rear 3 Point mounted TKH) 45 Gallon Sprinkler System (mounted on the brush hood) - add $1,290 Parallel Arm Floatation System - add $2,000 Oil Cooler with Fan - add $950

Part Number Description 100-140381 Hub Assembly, Caster Wheel - $59.72 100-140383 Seal, Grease, Caster Hub - $2.64 100-176776 Wheel & Tire Assembly, Caster - $154.81 201-176962 Motor LH - $702.39 201-176963 Motor RH - $702.39 383-132568 Pin, Swing Cylinder - $24.21 400-64724 End Disc, Core - $31.95 400-83521 Cylinder, Swing - $398.60 401-176753 Caster Wheel Bolt. 11.00 - $74.29 401-176923 Hub Hex, Urethane - $98.19 401-176927 Motor Mount - $12.08 410-126149 Pin, Swing, Pivot Frame - $96.20 410-176750 Caster Fork, W.U. TKH - $135.96 410-94050 Stand, Storage - $39.90 603-75914 Bearing, Flanged, Caster Mounting - $9.69


Available OptionsBroom Width

8-foot (96”) Broom - add $1249-foot (108”) Broom - add $24810-foot (120”) Broom - add $37211-foot (132”) Broom - add $83812-foot (144”) Broom - add $962

Brush Filament Poly (Polypropylene) - add $0Dual Motor Size Low Flow (16 - 24 GPM) - add $200Method of Swing Electric/Hydraulic Swing with reverse rotation capabilities from loader - add $1,225 (Valve, swing cylinder, control box with harness,and swing cylinder hoses, MAX 40GPM)Loader Mounting Kit (please inquire if your coupler style is not shown) Quick Attach From with ACS Pro 2000 or CAT Fusion - add $3,550 Quick Attach Frame with JRB Coupler - add $3,000 Quick Attach Frame with Volvo Coupler - add $2,000 Quick Attach Frame with CAT IT - add $2,450 Quick Attach Frame with Euro Style Coupler - add $1,500 Mounting Frame with Pin-on Ears - add $1,500 Custom Mount Design Fee (Actual cost of coupler will be based after design) - add $2,500Optional Equipment Deflector (number of feet needed x $30/ft) - cost varies Spary Bary Only with Nozzles (number of feet needed x $45/ft) - cost varies 150 Gallon Three-Point Mount Sprinkler System (12 or 24 Volt) - add $2,180 45 Gallon Sprinkler System (mounted on the brush hood) - add $1,290 Parallel Arm Flotation System - add $2,000 Oil Cooler with Fan - add $2000

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

Total Cost $____________

$10,884*Standard model TKH-LHydraulic Broom for Loaders7-foot (84”) BroomPoly/Wire BrushStandard Dual Motor (28 to 40 GPM)Hydraulic Swing Cylinder ONLY (4th function valve required)M-B YellowMounting Frame with No Quick Coupler

*

Part Number Description100-100-1403 Hub Assembly, Caster Wheel - $59.72100-100-1403 Seal, Grease, Caster Hub - $2.64100-176776 Wheel & Tire Assembly, Caster - $154.81201-201-1769 Motor LH - $702.39201-201-1769 Motor RH - $702.39383-383-1325 Pin, Swing Cylinder - $24.21400-400-647 End Disc, Core - $31.95400-83521 Cylinder, Swing - $398.60401-176753 Caster Wheel Bolt. 11.00 - $74.29401-176923 Hub Hex, Urethane - $98.19401-176927 Motor Mount - $12.08410-126149 Pin, Swing, Pivot Frame - $96.20410-176750 Caster Fork, W.U. TKH - $135.96410-94050 Stand, Storage - $39.90603-75914 Bearing, Flanged, Caster Mounting - $9.69

Available Options Broom Width 8-foot (96”) Broom - add $124 9-foot (108”) Broom - add $248 10-foot (120”) Broom - add $372 11-foot (132”) Broom - add $838 12-foot (144”) Broom - add $962Brush Filament Poly (Polypropylene) - add $0Dual Motor Size Low Flow (16 - 24 GPM) - add $200Loader Mounting Kit (please inquire if your coupler style is not shown) 2 Pin Plow Mount Distance center to center of hitch pins: _____ Ground height to pins: _____- add $0 Monroe MTE-6000 Ground Height to Pin Center: _____ - add $1,100 Gledhill Hook and Loop (QCP) Ground height to loop: _____ - add $1,000 Husting 29” or 34” - add $1,600 Custom Mount Design Fee (Actual cost of mount will be based after design) - add $2,500Optional Equipment Deflector (number of feet needed x $30/ft) - cost varies Spary Bary Only with Nozzles (number of feet needed x $45/ft) - cost varies 150 Gallon Sprinkler System (no tank mount included) - add $1,800 45 Gallon Sprinkler System (mounted on the brush hood) - add $1,290 Oil Cooler with Fan - add $950

Part Number Description 100-140381 Hub Assembly, Caster Wheel - $59.72 100-140383 Seal, Grease, Caster Hub - $2.64 100-176776 Wheel & Tire Assembly, Caster - $154.81 201-176962 Motor LH - $702.39 201-176963 Motor RH - $702.39 383-132568 Pin, Swing Cylinder - $24.21 400-64724 End Disc, Core - $31.95 400-83521 Cylinder, Swing - $398.60 401-176753 Caster Wheel Bolt. 11.00 - $74.29 401-176923 Hub Hex, Urethane - $98.19 401-176927 Motor Mount - $12.08 410-126149 Pin, Swing, Pivot Frame - $96.20 410-176750 Caster Fork, W.U. TKH - $135.96 410-94050 Stand, Storage - $39.90 603-75914 Bearing, Flanged, Caster Mounting - $9.69


Total Cost $____________

www.m-bco.com 1.800.558.5800®

M-B Companies, Inc.

*Standard model TKH-TRHydraulic Broom for Trucks7-foot (84”) Broom Poly/Wire BrushStandard Dual Motor (28 to 40 GPM)Hydraulic Swing Cylinder OnlyM-B Yellow2 Pin Plow MountSight Indicators

$10,884*

aftermarket tractor,skidsteer & wheel loader attachments

Documents