agcs gtd 5

AG CommunicationSystems GTD-5 Cartridge

GuideSecond Edition

August 2008

Oracle ASAP Cartridge 2.0 for AG Communication Systems GTD-5

Copyright and Trademark InformationCopyright 1992, 2008, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

This software and documentation may provide access to or information on content, products and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third party content, products and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third party content, products or services.

AG Communication Systems GTD-5 Cartridge Guide iii

Contents1. Cartridge Overview ...................................................................................... 1

Cartridge content ................................................................................................................... 2Prerequisites ......................................................................................................................... 2About this guide .................................................................................................................... 2Services, features, and options ............................................................................................. 3Hardware and software requirements ................................................................................... 5

Network element (NE) interface ...................................................................................... 5ASAP version ................................................................................................................. 6

Connecting to the NE ............................................................................................................ 6Related documentation ......................................................................................................... 6

2. Installing and Testing the Cartridge ........................................................... 7Downloading the cartridge .................................................................................................... 7Starting ASAP ....................................................................................................................... 8Installing the cartridge ........................................................................................................... 8Uninstalling the cartridge ....................................................................................................... 9Testing the cartridge installation ........................................................................................... 9

Configuring loopback and live mode parameters ......................................................... 10Modifying agcs_gtd5_4008_pots_ne_config.xml .......................................................... 11Testing the installation .................................................................................................. 13

3. Atomic Service Description Layer (ASDL) Commands .......................... 15Commercial services service pack ...................................................................................... 17

A_AGCS-GTD5_4008_ADD_ACB ............................................................................... 21A_AGCS-GTD5_4008_ADD_ACB-CLASS .................................................................. 22A_AGCS-GTD5_4008_ADD_AR .................................................................................. 22A_AGCS-GTD5_4008_ADD_ATWC ............................................................................ 23A_AGCS-GTD5_4008_ADD_BLOCK-PC .................................................................... 24A_AGCS-GTD5_4008_ADD_BLOCK-TCT .................................................................. 25A_AGCS-GTD5_4008_ADD_CALL-PICKUP ............................................................... 26A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL ...................................................... 27A_AGCS-GTD5_4008_ADD_CALLING-NN ................................................................. 27A_AGCS-GTD5_4008_ADD_CDGG ............................................................................ 28A_AGCS-GTD5_4008_ADD_CFF-AC .......................................................................... 29A_AGCS-GTD5_4008_ADD_CFF-BC .......................................................................... 30A_AGCS-GTD5_4008_ADD_CFF-GRP-AC ................................................................. 31A_AGCS-GTD5_4008_ADD_CFF-GRP-BC ................................................................. 32A_AGCS-GTD5_4008_ADD_CFF-UC ......................................................................... 32A_AGCS-GTD5_4008_ADD_CFV-AC ......................................................................... 33A_AGCS-GTD5_4008_ADD_CFV-BC ......................................................................... 35A_AGCS-GTD5_4008_ADD_CFV-GRP-AC ................................................................ 36A_AGCS-GTD5_4008_ADD_CFV-GRP-BC ................................................................ 36A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC ........................................................... 37A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC ........................................................... 38

iv Oracle Corporation

A_AGCS-GTD5_4008_ADD_CFV-UC ......................................................................... 39A_AGCS-GTD5_4008_ADD_CH .................................................................................. 40A_AGCS-GTD5_4008_ADD_COT ............................................................................... 41A_AGCS-GTD5_4008_ADD_CW ................................................................................. 41A_AGCS-GTD5_4008_ADD_CWO .............................................................................. 43A_AGCS-GTD5_4008_ADD_DCW .............................................................................. 44A_AGCS-GTD5_4008_ADD_DP .................................................................................. 44A_AGCS-GTD5_4008_ADD_DR .................................................................................. 45A_AGCS-GTD5_4008_ADD_DS .................................................................................. 46A_AGCS-GTD5_4008_ADD_DTM ............................................................................... 47A_AGCS-GTD5_4008_ADD_FLAS .............................................................................. 47A_AGCS-GTD5_4008_ADD_HCMK ............................................................................ 48A_AGCS-GTD5_4008_ADD_HGRP ............................................................................ 49A_AGCS-GTD5_4008_ADD_HGRP-MEM ................................................................... 50A_AGCS-GTD5_4008_ADD_INFO-DIGIT ................................................................... 52A_AGCS-GTD5_4008_ADD_LDDA ............................................................................. 53A_AGCS-GTD5_4008_ADD_LINE ............................................................................... 54A_AGCS-GTD5_4008_ADD_LNR ................................................................................ 56A_AGCS-GTD5_4008_ADD_LSM ............................................................................... 57A_AGCS-GTD5_4008_ADD_MWI ............................................................................... 58A_AGCS-GTD5_4008_ADD_ORG-DDIAL ................................................................... 59A_AGCS-GTD5_4008_ADD_PARK ............................................................................. 59A_AGCS-GTD5_4008_ADD_PERM ............................................................................ 60A_AGCS-GTD5_4008_ADD_PILOT-LINE ................................................................... 61A_AGCS-GTD5_4008_ADD_RSU ............................................................................... 62A_AGCS-GTD5_4008_ADD_SC30 .............................................................................. 62A_AGCS-GTD5_4008_ADD_SC8 ................................................................................ 63A_AGCS-GTD5_4008_ADD_SCA ............................................................................... 64A_AGCS-GTD5_4008_ADD_SCF ................................................................................ 65A_AGCS-GTD5_4008_ADD_SCR ............................................................................... 66A_AGCS-GTD5_4008_ADD_SCW .............................................................................. 66A_AGCS-GTD5_4008_ADD_SET-CCF ....................................................................... 67A_AGCS-GTD5_4008_ADD_SET-TDP ....................................................................... 69A_AGCS-GTD5_4008_ADD_SNR ............................................................................... 71A_AGCS-GTD5_4008_ADD_SR-DR ........................................................................... 71A_AGCS-GTD5_4008_ADD_SSO ............................................................................... 72A_AGCS-GTD5_4008_ADD_TDP ................................................................................ 73A_AGCS-GTD5_4008_ADD_TDS ................................................................................ 74A_AGCS-GTD5_4008_ADD_TEMP-DC ...................................................................... 75A_AGCS-GTD5_4008_ADD_TRDP ............................................................................. 75A_AGCS-GTD5_4008_ADD_TWC ............................................................................... 77A_AGCS-GTD5_4008_ADD_UACL ............................................................................. 78A_AGCS-GTD5_4008_ADD_UACN ............................................................................. 79A_AGCS-GTD5_4008_ADD_UANC ............................................................................. 80A_AGCS-GTD5_4008_ADD_UCD ............................................................................... 81A_AGCS-GTD5_4008_ADD_UCR ............................................................................... 81A_AGCS-GTD5_4008_ADD_URCL ............................................................................. 82A_AGCS-GTD5_4008_ADD_URCN ............................................................................ 83

AG Communication Systems GTD-5 Cartridge Guide v

A_AGCS-GTD5_4008_ADD_URNC ............................................................................ 84A_AGCS-GTD5_4008_DEL_ACB ................................................................................ 85A_AGCS-GTD5_4008_DEL_ACB-CLASS ................................................................... 85A_AGCS-GTD5_4008_DEL_AR .................................................................................. 86A_AGCS-GTD5_4008_DEL_ATWC ............................................................................. 87A_AGCS-GTD5_4008_DEL_BLOCK-PC ..................................................................... 87A_AGCS-GTD5_4008_DEL_BLOCK-TCT ................................................................... 89A_AGCS-GTD5_4008_DEL_CALL-PICKUP ................................................................ 90A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL ....................................................... 90A_AGCS-GTD5_4008_DEL_CALLING-NN .................................................................. 91A_AGCS-GTD5_4008_DEL_CDGG ............................................................................. 92A_AGCS-GTD5_4008_DEL_CFF-AC .......................................................................... 93A_AGCS-GTD5_4008_DEL_CFF-BC .......................................................................... 93A_AGCS-GTD5_4008_DEL_CFF-GRP-AC ................................................................. 94A_AGCS-GTD5_4008_DEL_CFF-GRP-BC ................................................................. 95A_AGCS-GTD5_4008_DEL_CFF-UC .......................................................................... 95A_AGCS-GTD5_4008_DEL_CFV-AC .......................................................................... 96A_AGCS-GTD5_4008_DEL_CFV-BC .......................................................................... 96A_AGCS-GTD5_4008_DEL_CFV-GRP-AC ................................................................. 97A_AGCS-GTD5_4008_DEL_CFV-GRP-BC ................................................................. 98A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC ............................................................ 98A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC ............................................................ 99A_AGCS-GTD5_4008_DEL_CFV-UC .......................................................................... 99A_AGCS-GTD5_4008_DEL_CH ................................................................................ 100A_AGCS-GTD5_4008_DEL_COT .............................................................................. 101A_AGCS-GTD5_4008_DEL_CW ............................................................................... 101A_AGCS-GTD5_4008_DEL_CWO ............................................................................. 102A_AGCS-GTD5_4008_DEL_DCW ............................................................................. 103A_AGCS-GTD5_4008_DEL_DP ................................................................................ 103A_AGCS-GTD5_4008_DEL_DR ................................................................................ 104A_AGCS-GTD5_4008_DEL_DS ................................................................................ 105A_AGCS-GTD5_4008_DEL_DTM .............................................................................. 105A_AGCS-GTD5_4008_DEL_FLAS ............................................................................ 106A_AGCS-GTD5_4008_DEL_HGRP ........................................................................... 107A_AGCS-GTD5_4008_DEL_ICID .............................................................................. 107A_AGCS-GTD5_4008_DEL_LDDA ............................................................................ 108A_AGCS-GTD5_4008_DEL_LINE ............................................................................. 109A_AGCS-GTD5_4008_DEL_LNR .............................................................................. 110A_AGCS-GTD5_4008_DEL_MWI .............................................................................. 111A_AGCS-GTD5_4008_DEL_ORG-DDIAL ................................................................. 111A_AGCS-GTD5_4008_DEL_PARK ........................................................................... 112A_AGCS-GTD5_4008_DEL_SC30 ............................................................................ 113A_AGCS-GTD5_4008_DEL_SC8 .............................................................................. 114A_AGCS-GTD5_4008_DEL_SCA .............................................................................. 114A_AGCS-GTD5_4008_DEL_SCF .............................................................................. 115A_AGCS-GTD5_4008_DEL_SCR .............................................................................. 116A_AGCS-GTD5_4008_DEL_SCW ............................................................................. 117A_AGCS-GTD5_4008_DEL_SET-TDP ...................................................................... 117

vi Oracle Corporation

A_AGCS-GTD5_4008_DEL_SNR .............................................................................. 118A_AGCS-GTD5_4008_DEL_SR-DR .......................................................................... 119A_AGCS-GTD5_4008_DEL_SSO .............................................................................. 119A_AGCS-GTD5_4008_DEL_TDP .............................................................................. 120A_AGCS-GTD5_4008_DEL_TDS .............................................................................. 121A_AGCS-GTD5_4008_DEL_TEMP-DC ..................................................................... 122A_AGCS-GTD5_4008_DEL_TRDP ............................................................................ 122A_AGCS-GTD5_4008_DEL_TWC ............................................................................. 123A_AGCS-GTD5_4008_DEL_UCD .............................................................................. 124A_AGCS-GTD5_4008_DEL_UCR .............................................................................. 124A_AGCS-GTD5_4008_MOD_CID .............................................................................. 125A_AGCS-GTD5_4008_MOD_DN ............................................................................... 126A_AGCS-GTD5_4008_MOD_HG-SIZE ..................................................................... 127A_AGCS-GTD5_4008_MOD_ICID ............................................................................. 127A_AGCS-GTD5_4008_MOD_INTERCEPT ................................................................ 128A_AGCS-GTD5_4008_MOD_SCOS .......................................................................... 129A_AGCS-GTD5_4008_MOD_SUB-GROUP .............................................................. 129

Understanding user exit type XML files ............................................................................. 130

4. Service Definition ..................................................................................... 143Common Service Description Layer (CSDL) commands .................................................. 144

C_AGCS-GTD5_4008_ADD_ACB ............................................................................. 148C_AGCS-GTD5_4008_ADD_ACB-CLASS ................................................................ 149C_AGCS-GTD5_4008_ADD_AR ................................................................................ 150C_AGCS-GTD5_4008_ADD_ATWC .......................................................................... 151C_AGCS-GTD5_4008_ADD_BLOCK-PC .................................................................. 152C_AGCS-GTD5_4008_ADD_BLOCK-TCT ................................................................ 153C_AGCS-GTD5_4008_ADD_CALL-PICKUP ............................................................. 154C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL .................................................... 155C_AGCS-GTD5_4008_ADD_CALLING-NN ............................................................... 155C_AGCS-GTD5_4008_ADD_CDGG .......................................................................... 156C_AGCS-GTD5_4008_ADD_CFF-AC ....................................................................... 157C_AGCS-GTD5_4008_ADD_CFF-BC ....................................................................... 158C_AGCS-GTD5_4008_ADD_CFF-GRP-AC .............................................................. 159C_AGCS-GTD5_4008_ADD_CFF-GRP-BC .............................................................. 160C_AGCS-GTD5_4008_ADD_CFF-UC ....................................................................... 161C_AGCS-GTD5_4008_ADD_CFV-AC ....................................................................... 162C_AGCS-GTD5_4008_ADD_CFV-BC ....................................................................... 163C_AGCS-GTD5_4008_ADD_CFV-GRP-AC .............................................................. 164C_AGCS-GTD5_4008_ADD_CFV-GRP-BC .............................................................. 165C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC ......................................................... 166C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC ......................................................... 166C_AGCS-GTD5_4008_ADD_CFV-UC ....................................................................... 167C_AGCS-GTD5_4008_ADD_CH ............................................................................... 169C_AGCS-GTD5_4008_ADD_COT ............................................................................. 170C_AGCS-GTD5_4008_ADD_CW ............................................................................... 170C_AGCS-GTD5_4008_ADD_CWO ............................................................................ 172C_AGCS-GTD5_4008_ADD_DCW ............................................................................ 173

AG Communication Systems GTD-5 Cartridge Guide vii

C_AGCS-GTD5_4008_ADD_DP ................................................................................ 173C_AGCS-GTD5_4008_ADD_DR ............................................................................... 174C_AGCS-GTD5_4008_ADD_DS ................................................................................ 175C_AGCS-GTD5_4008_ADD_DTM ............................................................................. 176C_AGCS-GTD5_4008_ADD_FLAS ............................................................................ 176C_AGCS-GTD5_4008_ADD_HCMK .......................................................................... 177C_AGCS-GTD5_4008_ADD_HGRP .......................................................................... 178C_AGCS-GTD5_4008_ADD_HGRP-MEM ................................................................. 179C_AGCS-GTD5_4008_ADD_INFO-DIGIT ................................................................. 181C_AGCS-GTD5_4008_ADD_LDDA ........................................................................... 182C_AGCS-GTD5_4008_ADD_LINE ............................................................................. 183C_AGCS-GTD5_4008_ADD_LNR ............................................................................. 185C_AGCS-GTD5_4008_ADD_LSM ............................................................................. 186C_AGCS-GTD5_4008_ADD_MWI ............................................................................. 186C_AGCS-GTD5_4008_ADD_ORG-DDIAL ................................................................. 188C_AGCS-GTD5_4008_ADD_PARK ........................................................................... 188C_AGCS-GTD5_4008_ADD_PERM .......................................................................... 189C_AGCS-GTD5_4008_ADD_PILOT-LINE ................................................................. 190C_AGCS-GTD5_4008_ADD_RSU ............................................................................. 191C_AGCS-GTD5_4008_ADD_SC30 ............................................................................ 191C_AGCS-GTD5_4008_ADD_SC8 .............................................................................. 192C_AGCS-GTD5_4008_ADD_SCA ............................................................................. 193C_AGCS-GTD5_4008_ADD_SCF ............................................................................. 194C_AGCS-GTD5_4008_ADD_SCR ............................................................................. 195C_AGCS-GTD5_4008_ADD_SCW ............................................................................ 196C_AGCS-GTD5_4008_ADD_SET-CCF ..................................................................... 196C_AGCS-GTD5_4008_ADD_SET-TDP ..................................................................... 198C_AGCS-GTD5_4008_ADD_SNR ............................................................................. 200C_AGCS-GTD5_4008_ADD_SR-DR ......................................................................... 200C_AGCS-GTD5_4008_ADD_SSO ............................................................................. 202C_AGCS-GTD5_4008_ADD_TDP ............................................................................. 202C_AGCS-GTD5_4008_ADD_TDS ............................................................................. 203C_AGCS-GTD5_4008_ADD_TEMP-DC .................................................................... 204C_AGCS-GTD5_4008_ADD_TRDP ........................................................................... 205C_AGCS-GTD5_4008_ADD_TWC ............................................................................ 206C_AGCS-GTD5_4008_ADD_UACL ........................................................................... 207C_AGCS-GTD5_4008_ADD_UACN .......................................................................... 208C_AGCS-GTD5_4008_ADD_UANC .......................................................................... 210C_AGCS-GTD5_4008_ADD_UCD ............................................................................. 211C_AGCS-GTD5_4008_ADD_UCR ............................................................................. 211C_AGCS-GTD5_4008_ADD_URCL ........................................................................... 212C_AGCS-GTD5_4008_ADD_URCN .......................................................................... 213C_AGCS-GTD5_4008_ADD_URNC .......................................................................... 214C_AGCS-GTD5_4008_DEL_ACB .............................................................................. 215C_AGCS-GTD5_4008_DEL_ACB-CLASS ................................................................. 216C_AGCS-GTD5_4008_DEL_AR ................................................................................ 217C_AGCS-GTD5_4008_DEL_ATWC ........................................................................... 217C_AGCS-GTD5_4008_DEL_BLOCK-PC ................................................................... 218

viii Oracle Corporation

C_AGCS-GTD5_4008_DEL_BLOCK-TCT ................................................................. 219C_AGCS-GTD5_4008_DEL_CALL-PICKUP .............................................................. 220C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL ..................................................... 221C_AGCS-GTD5_4008_DEL_CALLING-NN ............................................................... 222C_AGCS-GTD5_4008_DEL_CDGG .......................................................................... 223C_AGCS-GTD5_4008_DEL_CFF-AC ........................................................................ 223C_AGCS-GTD5_4008_DEL_CFF-BC ........................................................................ 224C_AGCS-GTD5_4008_DEL_CFF-GRP-AC ............................................................... 225C_AGCS-GTD5_4008_DEL_CFF-GRP-BC ............................................................... 225C_AGCS-GTD5_4008_DEL_CFF-UC ........................................................................ 226C_AGCS-GTD5_4008_DEL_CFV-AC ........................................................................ 227C_AGCS-GTD5_4008_DEL_CFV-BC ........................................................................ 227C_AGCS-GTD5_4008_DEL_CFV-GRP-AC ............................................................... 228C_AGCS-GTD5_4008_DEL_CFV-GRP-BC ............................................................... 229C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC .......................................................... 229C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC .......................................................... 230C_AGCS-GTD5_4008_DEL_CFV-UC ........................................................................ 230C_AGCS-GTD5_4008_DEL_CH ................................................................................ 231C_AGCS-GTD5_4008_DEL_COT .............................................................................. 232C_AGCS-GTD5_4008_DEL_CW ............................................................................... 232C_AGCS-GTD5_4008_DEL_CWO ............................................................................ 233C_AGCS-GTD5_4008_DEL_DCW ............................................................................. 234C_AGCS-GTD5_4008_DEL_DP ................................................................................ 235C_AGCS-GTD5_4008_DEL_DR ................................................................................ 235C_AGCS-GTD5_4008_DEL_DS ................................................................................ 236C_AGCS-GTD5_4008_DEL_DTM ............................................................................. 237C_AGCS-GTD5_4008_DEL_FLAS ............................................................................ 237C_AGCS-GTD5_4008_DEL_HGRP ........................................................................... 238C_AGCS-GTD5_4008_DEL_ICID .............................................................................. 239C_AGCS-GTD5_4008_DEL_LDDA ............................................................................ 239C_AGCS-GTD5_4008_DEL_LINE ............................................................................. 240C_AGCS-GTD5_4008_DEL_LNR .............................................................................. 242C_AGCS-GTD5_4008_DEL_MWI .............................................................................. 242C_AGCS-GTD5_4008_DEL_ORG-DDIAL ................................................................. 243C_AGCS-GTD5_4008_DEL_PARK ........................................................................... 244C_AGCS-GTD5_4008_DEL_SC30 ............................................................................ 245C_AGCS-GTD5_4008_DEL_SC8 .............................................................................. 246C_AGCS-GTD5_4008_DEL_SCA .............................................................................. 247C_AGCS-GTD5_4008_DEL_SCF .............................................................................. 247C_AGCS-GTD5_4008_DEL_SCR .............................................................................. 248C_AGCS-GTD5_4008_DEL_SCW ............................................................................. 249C_AGCS-GTD5_4008_DEL_SET-TDP ...................................................................... 250C_AGCS-GTD5_4008_DEL_SNR .............................................................................. 250C_AGCS-GTD5_4008_DEL_SR-DR .......................................................................... 251C_AGCS-GTD5_4008_DEL_SSO ............................................................................. 252C_AGCS-GTD5_4008_DEL_TDP .............................................................................. 253C_AGCS-GTD5_4008_DEL_TDS .............................................................................. 253C_AGCS-GTD5_4008_DEL_TEMP-DC ..................................................................... 254

AG Communication Systems GTD-5 Cartridge Guide ix

C_AGCS-GTD5_4008_DEL_TRDP ........................................................................... 255C_AGCS-GTD5_4008_DEL_TWC ............................................................................. 256C_AGCS-GTD5_4008_DEL_UCD ............................................................................. 256C_AGCS-GTD5_4008_DEL_UCR ............................................................................. 257C_AGCS-GTD5_4008_MOD_CID .............................................................................. 258C_AGCS-GTD5_4008_MOD_DN ............................................................................... 258C_AGCS-GTD5_4008_MOD_HG-SIZE ..................................................................... 259C_AGCS-GTD5_4008_MOD_ICID ............................................................................. 260C_AGCS-GTD5_4008_MOD_INTERCEPT ............................................................... 261C_AGCS-GTD5_4008_MOD_SCOS .......................................................................... 262C_AGCS-GTD5_4008_MOD_SUB-GROUP .............................................................. 262

5. Configuring ASAP to Support Additional NE Instances ...................... 265Extracting source files ....................................................................................................... 268

Loading a new XML file .............................................................................................. 268

Appendix A: Description of the feature parameters and their options 269List of features and their options ....................................................................................... 269

Add Line ..................................................................................................................... 323

x Oracle Corporation

AG Communication Systems GTD-5 Cartridge Guide 1

1

Cartridge OverviewASAP cartridges are discrete software components that are developed for the ASAP product. An ASAP cartridge offers specific domain behavior on top of the core ASAP software, and provides the configuration that supports a set of services on a network element (NE).

An ASAP cartridge is not a stand-alone component, but operates in conjunction with the ASAP core product. ASAP cartridges offer the following benefits:

Reduced Time to Markettime to market of new services is reduced through simplified development, implementation, and extension of cartridges on customer sites.

Extendablecartridges can be extended to include additional services and components that deliver business value, without requiring changes to the original cartridge.

Simplified Effortthe effort and technical knowledge that is required to perform customizations is reduced.

Ease of Installationcartridges can be installed into an ASAP environment without interfering with the existing install base.

An ASAP cartridge can be used to configure ASAP to provision the following:

NEs from a specific vendor, such as Nortel or Lucent. Technologies, such as Asynchronous Transfer Mode (ATM) and Frame Relay switches, or

Internet Protocol (IP) routers. Services that are supported on the NE, such as ATM, IP Virtual Private Networks (VPN),

Wireless, or Optical.

An ASAP cartridge supports a particular set of services on an NE. These services are independent of customer-specific service definitions. Professional Services or systems integrators can perform extensions to the cartridge to support customer-specific requirements.

For more information on extending a cartridge, refer to the ASAP Cartridge Development Guide for Service Activation.

Cartridges are designed for a specific technology, software load, and service.

Chapter 1: Cartridge Overview

2 Oracle Corporation

Cartridge contentAn ASAP cartridge contains the following:

An interface to the NE A set of scripts, such as State Tables or Java methods A set of atomic actions in the form of Atomic Service Description Layer (ASDL)

commands A set of Common Service Description Layer (CSDL) commands that form meaningful

services Sample work orders Installation scripts

PrerequisitesSystem integrators such as managers, designers, programmers, and testers who are responsible for the adaptation and integration of ASAP-based solutions should use this manual as a reference. It assumes that readers possess the following skills:

A knowledge of ASAP programming concepts A good working knowledge of the UNIX operating system A thorough understanding of service and network provisioning Familiarity with telecommunications

About this guideThis guide provides a detailed description of the AGCS GTD-5 Cartridge. It contains overview and technical information to assist with extending and integrating the cartridge into a customer environment.

The scope of this guide includes ASAP as it pertains to this cartridge. It is not a complete ASAP reference guide.

For additional ASAP information when using this cartridge, refer to the following supporting documentation:

ASAP documentation setfor detailed information on the ASAP core product. ASAP Cartridge Development Guide for Service Activationfor information on how

to extend a cartridge.

The AGCS GTD-5 Cartridge cartridge provides the ASAP service configuration and network element (NE) interface to activate POTS services on AGCS NEs.

Services, features, and options


Services, features, and optionsThe following table lists the provisioning services provided in the cartridge:

Table 1: POTS SERVICES

Service Description

Unidentified Call Rejection This service adds or deletes unidentified call rejection.

Auto Call Back This service adds or deletes auto call back, CLASS version Auto call back.

Automatic recall This service adds or deletes automatic recall.

Block Translation call types This service adds or deletes translation call types.

Call Forward This service adds or deletes various call forwarding - fixed, variable, group - all, busy, unanswered

Call Hold This service adds or deletes call hold.

Call Park This service adds or deletes call park.

Call Waiting Originating This service adds or deletes call waiting originating.

Call forward group This service adds or deletes call forward group.

Call waiting ID This service adds or deletes call waiting ID, deluxe call waiting ID.

Call waiting This service adds or deletes call waiting.

Caller ID block This service adds or deletes caller id block per call, per line.

Calling Name, Number. This service adds or deletes calling number only or name and number delivery.

Cancel call waiting This service add or deletes cancel call waiting.

Change Number This service changes telephone number, remote call forwarding number.

Customer originated trace This service adds or deletes customer originated trace.

Data Security This service adds or deletes data security.

Dial Pulse. This service adds or deletes dial pulse.



Distinctive Ring This service enables/disables distinctive ring.

Event based billing block This service adds or deletes event based billing blocking for automatic busy redial, automatic recall, customer originated trace, three way calling.

FLAS This service set the on hook treatment field to FLAS.

Hunt Group This service adds or deletes hunt group.

Selective call reject This service adds or deletes selective call reject.

Info digits This service adds or deletes info digits.

Intra Carrier ID This service change intra LATA toll carrier.

Last Number Redial This service adds or deletes last number redial.

Line This service adds or deletes Line.

Originator Denied Dialing This service adds or deletes originator denied 10XXX or 101XXXX dialing

Permanent treatment index This service sets the permanent treatment index.

Saved Number Redial This service adds or deletes saved number redial.

Selective Call Acceptance This service adds or deletes selective call acceptance.

Smart Ring This service adds or deletes smart ring distinctive ringing.

Selective Call Forwarding This service adds or deletes selective call forwarding.

Selective Call Waiting This service adds or deletes selective call waiting.

Speed Call 30 This service adds or deletes speed call 30.

Speed Call 8 This service adds or deletes speed call 8.

Temporary Disconnect. This service enables or disables temporary disconnect.

Three way calling This service adds or deletes three way calling.

Trigger Detection Point. This service adds or deletes trigger detection point, call intercept.


Service Description

Hardware and software requirements


Hardware and software requirementsThe following sections contain the high-level software and hardware environment requirements for provisioning POTS services using this cartridge, including:

Network element (NE) interface ASAP version

Network element (NE) interfaceThis cartridge operates with the following:

Translation Detection Point. This service adds or deletes translation detection point.

Uniform Call Distribution This service adds or deletes uniform call distribution.

Usage assignable, Usage recordable This service adds or deletes usage assignable/recordable (UACL,UANC,URCL,URCN).

Special Screening on Origination This service adds or deletes special screening on origination.

Translation set data This service adds or deletes translation set data.

Denied termination This service adds or deletes denied termination feature.

Control Party for group This service adds or deletes control party for group feature.

Intercept This service modify intercept service name after deleting a line.

Hardware class mark set This service adds hardware class mark set feature.

Group for survivability This service adds group for survivability.

Line supervision method This service adds line supervision method.

Long distance distinctive ringing and/or distinctive call waiting tone

This service adds or deletes long distance distinctive ringing and/or distinctive call waiting tone.

Secondary class of service. This service modifies SCOS and optionally PCOS of a line.


Service Description



AG Communication Systems' GTD-5 switch, software load 4.0.0.8 Telnet protocol is used for ASAP to access the NE

ASAP versionThis cartridge was developed and tested using ASAP 4.7.1.

For more information on the operating environment of this ASAP version, refer to the ASAP 4.7.1 Release Record.

Connecting to the NEASAP uses the telnet protocol to access the GTD-5 NE.

Related documentationThis cartridge was developed according to the following Network Element Provisioning Specifications:

Lucent Technologies GTD-5 EAX Documentation (CD-ROM)


2

Installing and Testing the CartridgeThis chapter describes the following procedures related to installing and testing the cartridge:

Downloading the cartridge Installing the cartridge Uninstalling the cartridge Testing the cartridge installation

Downloading the cartridgeBefore you can install the cartridge, you must use the internet to download the cartridges TAR file from Oracles Customer Portal.

Use the following instructions to download, then unTAR the TAR file.

To download the TAR file

1. Login to Oracle MetaLink internet home page (http://www.metalink.oracle.com).

2. Download the cartridge patch to your workstation.

To unTAR the TAR file

1. On your workstation, create a repository directorythe naming of which is your choice.mkdir

2. Untar AGCSGTD5_R2_0_0.xxx.tartar xvf AGCSGTD5_R2_0_0.xxx.tar

3. Copy the resulting /AGCS_GTD5_4008 directory and its contents to the repository directory.

cp -rf /AGCS_GTD5_4008 The directory structure in the repository directory should look like the following illustration. (this illustration describes the minimum required structure; you can enhance this directory structure with additional directories based on your requirements and deliverables).

AGCS_GTD5_4008/README/installCartridge

Chapter 2: Installing and Testing the Cartridge


/uninstallCartridge/AGCS_GTD5_4008_POTS_2_0.sar

Starting ASAPBefore installing the cartridge, ensure that ASAP is running.

To start ASAP

1. To start ASAP, execute the following script:start_asap_sys

2. Ensure the ASAP Daemon (DAM_$ENV_ID) is running by checking the ASAP status using the ASAP script status.

3. Check whether the WebLogic instance for this ASAP environment is running. If not, start the WebLogic instance.

The ASAP Administration Guide contains more information on starting ASAP, the ASAP Daemon, and WebLogic.

Installing the cartridgeRun the installation script installCartridge to install the cartridge. You will find this script under /AGCS_GTD5_4008. The script executes the following tasks:

Configures the AGCS GTD-5 Cartridge-specific NE using the SACT. Deploys the AGCS GTD-5 Cartridge service model (only if the AGCS GTD-5 Cartridge

service model is not yet deployed) using the Service Activation Deployment Tool (SADT).

Copies the AGCS GTD-5 Cartridge-specific jar files and the cpp library file to the ASAP environment.

Loads the sample work orders to the SRP database.

For information on the SACT and the SADT, refer to the ASAP Administration Guide.

To install the cartridge

1. Run the installCartridge script from /AGCS_GTD5_4008. At the prompt, type:installCartridge AGCS_GTD5_4008_POTS_2_0.sar

2. The script prompts you for the values of the following WebLogic login parameters:

WebLogic Hostname WebLogic HTTP Port WebLogic Login User ID WebLogic Login Password

Uninstalling the cartridge


The script loads the NEP-NE configuration and the CSDL-ASDL configuration to the SARM database, and loads sample work orders to the SRP database. The script also copies the cartridge-specific jar files and cpp library file to the ASAP environment.

3. Restart ASAP to upload the cartridge configuration into ASAP.

Uninstalling the cartridgeRun the uninstallation script uninstallCartridge to uninstall the AGCS GTD-5 Cartridge. This script is located under AGCS_GTD5_4008. The script executes the following tasks:

Unconfigures AGCS GTD-5 Cartridge-specific NEs using the SACT. Undeploys the AGCS GTD-5 Cartridge service model (only if the AGCS GTD-5

Cartridge service model is already deployed) using the Service Activation Deployment Tool (SADT).

Removes the AGCS GTD-5 Cartridge-specific jar files and cpp library file from the ASAP environment.

For more information on the SACT and the SADT, refer to the ASAP Administration Guide.

To uninstall the cartridge

1. Run the uninstallCartridge script from /AGCS_GTD5_4008. At the prompt, type uninstallCartridge AGCS_GTD5_4008_POTS_2_0..sar

2. The script prompts you for the values of the following parameters:

WebLogic Hostname WebLogic HTTP Port WebLogic Login User ID WebLogic Login Password

The script unloads the NEP-NE configuration and CSDL-ASDL configuration from SARM database. It also removes the cartridge specific jar files and cpp library file from the ASAP environment.

Testing the cartridge installationTo test this cartridge installation, you need to know about the network element (NE), services, and basic ASAP configuration. You may need to perform adjustments to provision a service for a specific NE, network, or connectivity configuration.

You can test the cartridge installation using one of the following methods:

Loopback modedoes not actually connect to or send commands to the NE. Live modeconnects to and sends commands to a live NE.



Configuring loopback and live mode parametersSets the following variables to test the cartridge in loopback or live testing modes.

Loopback modeSets the following parameter to test the cartridge in loopback mode.

Live modeSets the following parameter to test the cartridge in live mode.

Communication parametersThe following are the list of parameters for the sample NE configuration XML used by SACT.

Table 2: Loopback Mode Parameter Settings

Configuration Variable Parameter Settings Location

LOOPBACK_ON 1 (default setting) ASAP.cfg

Table 3: Live Mode Parameter Settings

Configuration Variable Parameter Settings Location

LOOPBACK_ON 0 ASAP.cfg

Table 4: Communication parameters in ne_config XML

Parameters Default Value Description

HOST_IPADDR 141.239.14.71 The IP Address of Server.

PORT 23 Port number.

HOST_USERID z775379 User id for Login.

HOST_PASSWORD 123456mm Password to login.

READ_TIMEOUT 30 Read timeout in seconds.

LOGIN_PROMPT login: Login Prompt.

PASSWORD_PROMPT Password: Password prompt.

Testing the cartridge installation


Modifying agcs_gtd5_4008_pots_ne_config.xmlUse the following procedure to modify agcs_gtd5_4008_pots_ne_config.xml.

To modify agcs_gtd5_4008_pots_ne_config.xml

1. Create a new source directory under /AGCS_GTD5_4008. You can give this directory any appropriate, meaningful name you want to.

mkdir 2. Copy AGCS_GTD5_4008_POTS_2_0.sar to this new source directory.

cp AGCS_GTD5_4008_POTS_2_0.sar ./3. Change directory to .

cd 4. Un-jar AGCS_GTD5_4008_POTS_2_0.sar This extracts the contents of the sar file (see

Figure 1 on page 12 for an example of the resulting file structure).

jar xvf AGCS_GTD5_4008_POTS_2_0.sar5. Edit /AGCS_GTD5_4008/common/application_config/

agcs_gtd5_4008_pots_ne_config.xml in with the appropriate changes.

6. Create a new sar file at the level. CreateSar $PWD

PROMPT ; Provisioning Prompt.

ACCESS_GUARD Y Flag to turn on or off Access Guard gateway.

DESTINATION_ID MILNHICODS1 Destination Identification number.

DESTINATION_PROMPT Destination: Destination Prompt.

RESPONSELOG TRUE Flag to turn on or off response logging.

OPEN_TIMEOUT 20 Connection timeout in seconds.

Table 4: Communication parameters in ne_config XML

Parameters Default Value Description



7. Uninstall the cartridge using AGCS_GTD5_4008_POTS_2_0.sar in /AGCS_GTD5_4008 (That is, use the original sar file that you copied in Step 2 abovesee Uninstalling the cartridge on page 9 for uninstallation instructions).

8. After you uninstall the cartridge, rename the sar file in /AGCS_GTD5_4008 so you have a backup copy of it.

9. Copy the new sar file from to /AGCS_GTD5_4008.

10. Reinstall the cartridge (see Installing the cartridge on page 8 for installation instructions).

Figure 1: File Structure of the Un-Jared .sar File

Testing the cartridge installation


Testing the installationThe following procedure describes the steps required to test the cartridge installation in loopback mode. We recommend that you perform the initial cartridge installation test in loopback mode.

To test in loopback mode

1. Stop ASAP by typing the following command at the UNIX prompt:stop_asap_sys

2. Ensure loop back mode is on. See Loopback mode on page 10 for a description of how to set the loop back parameter to On.

3. Start ASAP by typing:start_asap_sys

4. Send the sample work orders through the SRP Emulator by typing:run_suite $SRP

You can locate the suite names in /AGCS_GTD5_4008/sample_wo by typing:grep SUITE * | grep -v END

A list of all available suites appears.

To see the sample work orders, refer to Viewing the sample work orders, below.

For more information on the SRP Emulator, refer to the ASAP Administration Guide.

5. Verify the status of the sample work orders by typing:asap_utils l

All successful work orders return the 104 state.

To view the sample work orders provided with this cartridge, refer to the AGCS GTD-5 Cartridge cartridge source.

Viewing the sample work ordersYou find the sample work orders under the sample_wo directory in the sar file. The following procedure describes how to view the sample work orders.

To view the sample work orders

1. If necessary, create a repository directory under /AGCS_GTD5_4008, copy the sar file to the new directory and un-jar the sar file, as described by Step 1 through Step 4 in Modifying agcs_gtd5_4008_pots_ne_config.xml on page 11.

2. Locate and view the sample work order files under /AGCS/GTD5_4008/POTS/sample_wo.


3

Atomic Service Description Layer (ASDL) Commands

ASDL commands represent a set of atomic actions that ASAP can perform on a network element (NE). ASAP can combine ASDLs to create meaningful services (CSDLs) within a cartridge.

This chapter presents detailed information on the ASDL parameters that we provide with this cartridge. The following table lists and describes the type of parameter information that is included.

Table 5: ASDL parameter information

Item Description

Parameter Name Identifies the parameter that is configured for the stated service.

Description Describes the parameter.

Range Describes or lists the range of values that can be used to satisfy this parameter.

Default Value Configures a default value for the parameter and not mandatory for the upstream system to provide a value.

Chapter 3: Atomic Service Description Layer (ASDL) Commands


For a detailed description of the Required and Optional parameter classifications, refer to the ASAP Administration Guide.

Type Indicates one of the following parameter types:

SScalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.

CCompound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.

IIndexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.

For more information on parameter types, refer to the ASAP Developers Reference.

Class Indicates one of the following parameter classifications:

RRequired scalar parameter OOptional scalar parameter CRequired compound parameter NOptional compound parameter MMandatory indexed parameter IOptional indexed parameter SParameter count

Table 5: ASDL parameter information

Item Description

Commercial services service pack


Commercial services service packThe AGCS GTD-5 Cartridge provides the following ASDL commands to support POTS service on AGCS NEs:

A_AGCS-GTD5_4008_ADD_ACB A_AGCS-GTD5_4008_ADD_ACB-CLASS A_AGCS-GTD5_4008_ADD_AR A_AGCS-GTD5_4008_ADD_ATWC A_AGCS-GTD5_4008_ADD_BLOCK-PC A_AGCS-GTD5_4008_ADD_BLOCK-TCT A_AGCS-GTD5_4008_ADD_CALL-PICKUP A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL A_AGCS-GTD5_4008_ADD_CALLING-NN A_AGCS-GTD5_4008_ADD_CDGG A_AGCS-GTD5_4008_ADD_CFF-AC A_AGCS-GTD5_4008_ADD_CFF-BC A_AGCS-GTD5_4008_ADD_CFF-GRP-AC A_AGCS-GTD5_4008_ADD_CFF-GRP-BC A_AGCS-GTD5_4008_ADD_CFF-UC A_AGCS-GTD5_4008_ADD_CFV-AC A_AGCS-GTD5_4008_ADD_CFV-BC A_AGCS-GTD5_4008_ADD_CFV-GRP-AC A_AGCS-GTD5_4008_ADD_CFV-GRP-BC A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC A_AGCS-GTD5_4008_ADD_CFV-UC A_AGCS-GTD5_4008_ADD_CH A_AGCS-GTD5_4008_ADD_COT A_AGCS-GTD5_4008_ADD_CW A_AGCS-GTD5_4008_ADD_CWO A_AGCS-GTD5_4008_ADD_DCW A_AGCS-GTD5_4008_ADD_DP A_AGCS-GTD5_4008_ADD_DR A_AGCS-GTD5_4008_ADD_DS A_AGCS-GTD5_4008_ADD_DTM A_AGCS-GTD5_4008_ADD_FLAS



A_AGCS-GTD5_4008_ADD_HCMK A_AGCS-GTD5_4008_ADD_HGRP A_AGCS-GTD5_4008_ADD_HGRP-MEM A_AGCS-GTD5_4008_ADD_INFO-DIGIT A_AGCS-GTD5_4008_ADD_LDDA A_AGCS-GTD5_4008_ADD_LINE A_AGCS-GTD5_4008_ADD_LNR A_AGCS-GTD5_4008_ADD_LSM A_AGCS-GTD5_4008_ADD_MWI A_AGCS-GTD5_4008_ADD_ORG-DDIAL A_AGCS-GTD5_4008_ADD_PARK A_AGCS-GTD5_4008_ADD_PERM A_AGCS-GTD5_4008_ADD_PILOT-LINE A_AGCS-GTD5_4008_ADD_RSU A_AGCS-GTD5_4008_ADD_SC30 A_AGCS-GTD5_4008_ADD_SC8 A_AGCS-GTD5_4008_ADD_SCA A_AGCS-GTD5_4008_ADD_SCF A_AGCS-GTD5_4008_ADD_SCR A_AGCS-GTD5_4008_ADD_SCW A_AGCS-GTD5_4008_ADD_SET-CCF A_AGCS-GTD5_4008_ADD_SET-TDP A_AGCS-GTD5_4008_ADD_SNR A_AGCS-GTD5_4008_ADD_SR-DR A_AGCS-GTD5_4008_ADD_SSO A_AGCS-GTD5_4008_ADD_TDP A_AGCS-GTD5_4008_ADD_TDS A_AGCS-GTD5_4008_ADD_TEMP-DC A_AGCS-GTD5_4008_ADD_TRDP A_AGCS-GTD5_4008_ADD_TWC A_AGCS-GTD5_4008_ADD_UACL A_AGCS-GTD5_4008_ADD_UACN A_AGCS-GTD5_4008_ADD_UANC A_AGCS-GTD5_4008_ADD_UCD A_AGCS-GTD5_4008_ADD_UCR A_AGCS-GTD5_4008_ADD_URCL



A_AGCS-GTD5_4008_ADD_URCN A_AGCS-GTD5_4008_ADD_URNC A_AGCS-GTD5_4008_DEL_ACB A_AGCS-GTD5_4008_DEL_ACB-CLASS A_AGCS-GTD5_4008_DEL_AR A_AGCS-GTD5_4008_DEL_ATWC A_AGCS-GTD5_4008_DEL_BLOCK-PC A_AGCS-GTD5_4008_DEL_BLOCK-TCT A_AGCS-GTD5_4008_DEL_CALL-PICKUP A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL A_AGCS-GTD5_4008_DEL_CALLING-NN A_AGCS-GTD5_4008_DEL_CDGG A_AGCS-GTD5_4008_DEL_CFF-AC A_AGCS-GTD5_4008_DEL_CFF-BC A_AGCS-GTD5_4008_DEL_CFF-GRP-AC A_AGCS-GTD5_4008_DEL_CFF-GRP-BC A_AGCS-GTD5_4008_DEL_CFF-UC A_AGCS-GTD5_4008_DEL_CFV-AC A_AGCS-GTD5_4008_DEL_CFV-BC A_AGCS-GTD5_4008_DEL_CFV-GRP-AC A_AGCS-GTD5_4008_DEL_CFV-GRP-BC A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC A_AGCS-GTD5_4008_DEL_CFV-UC A_AGCS-GTD5_4008_DEL_CH A_AGCS-GTD5_4008_DEL_COT A_AGCS-GTD5_4008_DEL_CW A_AGCS-GTD5_4008_DEL_CWO A_AGCS-GTD5_4008_DEL_DCW A_AGCS-GTD5_4008_DEL_DP A_AGCS-GTD5_4008_DEL_DR A_AGCS-GTD5_4008_DEL_DS A_AGCS-GTD5_4008_DEL_DTM A_AGCS-GTD5_4008_DEL_FLAS A_AGCS-GTD5_4008_DEL_HGRP A_AGCS-GTD5_4008_DEL_ICID



A_AGCS-GTD5_4008_DEL_LDDA A_AGCS-GTD5_4008_DEL_LINE A_AGCS-GTD5_4008_DEL_LNR A_AGCS-GTD5_4008_DEL_MWI A_AGCS-GTD5_4008_DEL_ORG-DDIAL A_AGCS-GTD5_4008_DEL_PARK A_AGCS-GTD5_4008_DEL_SC30 A_AGCS-GTD5_4008_DEL_SC8 A_AGCS-GTD5_4008_DEL_SCA A_AGCS-GTD5_4008_DEL_SCF A_AGCS-GTD5_4008_DEL_SCR A_AGCS-GTD5_4008_DEL_SCW A_AGCS-GTD5_4008_DEL_SET-TDP A_AGCS-GTD5_4008_DEL_SNR A_AGCS-GTD5_4008_DEL_SR-DR A_AGCS-GTD5_4008_DEL_SSO A_AGCS-GTD5_4008_DEL_TDP A_AGCS-GTD5_4008_DEL_TDS A_AGCS-GTD5_4008_DEL_TEMP-DC A_AGCS-GTD5_4008_DEL_TRDP A_AGCS-GTD5_4008_DEL_TWC A_AGCS-GTD5_4008_DEL_UCD A_AGCS-GTD5_4008_DEL_UCR A_AGCS-GTD5_4008_MOD_CID A_AGCS-GTD5_4008_MOD_DN A_AGCS-GTD5_4008_MOD_HG-SIZE A_AGCS-GTD5_4008_MOD_ICID A_AGCS-GTD5_4008_MOD_INTERCEPT A_AGCS-GTD5_4008_MOD_SCOS A_AGCS-GTD5_4008_MOD_SUB-GROUP



A_AGCS-GTD5_4008_ADD_ACBAdds the auto call back feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addACB.

MML commandsCHAN DN [DN] [ACBB|ACBC]Note: ACBB is used if ACB_ACBB is set to Y.ACBC is used if ACB_ACBC is set to Y.

Output parametersNone.

Table 6: A_AGCS-GTD5_4008_ADD_ACB

Parameter Name Description Range Default Value Type Class

MCLI Remote network element name. S R

DN Directory number. Must include either DN or NPA (if 10-digit switch), NXX, and LINE, or HGRP_NUM.

S O

NPA Area code of the DN. S O

NXX Exchange of the DN. S O

LINE Line of the DN. S O

ACB_ACBB Unrestricted automatic call-back.

Y/N S O

ACB_ACBC Semi-restricted automatic call-back.

Y/N S O



A_AGCS-GTD5_4008_ADD_ACB-CLASSAdds the CLASS - auto call back feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addACB_CLASS.

MML commandsCHAN DN [DN] ACBD


A_AGCS-GTD5_4008_ADD_ARAdds the automatic recall feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addAR.

Table 7: A_AGCS-GTD5_4008_ADD_ACB-CLASS




S O




Table 8: A_AGCS-GTD5_4008_ADD_AR




S O



MML commandsCHAN DN [DN] ARCB|ARCC


A_AGCS-GTD5_4008_ADD_ATWCAdds the always available usage sensitive three-way calling feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addATWC.

MML commandsCHAN DN [DN] ATWC




ARC_TYPE Type of automatic recalling. ARCB or ARCC.

S R

Table 9: A_AGCS-GTD5_4008_ADD_ATWC




S O




Table 8: A_AGCS-GTD5_4008_ADD_AR





A_AGCS-GTD5_4008_ADD_BLOCK-PCAdds the prefix call blocking feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addBLOCK_PC.

MML commandsCHAN DN [DN] BLKP[.BIDD[.BIE3[.BZMS[.BZZM[.BOPS[.B1PS]]]]]]if BLKP is set, options are omitted.


Table 10: A_AGCS-GTD5_4008_ADD_BLOCK-PC




S O




BIDD Block 011+ dialing. Y S O

BIE3 Block 01+ dialing. Y S O

BZMS Block 0- dialing. Y S O

BZZM Block 00- dialing. Y S O

B0PS Block 0+ dialing. Y S O

B1PS Block 1+ dialing. Y S O

BLKP Block prefix calls. Y S O



A_AGCS-GTD5_4008_ADD_BLOCK-TCTAdds the translation call type blocking feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addBLOCK_TCT.

MML commandsCHAN DN [DN] BLKT[.B556[.B700[.B900[.B976[.BLDA]]]]]if BLKT is set, options are omitted.


Table 11: A_AGCS-GTD5_4008_ADD_BLOCK-TCT




S O




B556 Block 556 calls. Y/N S O




BLDA Block local directory assistance calls.

Y/N S O

BLKT Block translation call type calls. Y/N S O



A_AGCS-GTD5_4008_ADD_CALL-PICKUPAdds the call pickup - directed or group or extended feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALL_PICKUP.

MML commandsCHAN DN [DN] PICK.[DIRD|DIRG|GEN]


Table 12: A_AGCS-GTD5_4008_ADD_CALL-PICKUP




S O




PICK_TYPE Type of call-pickup:

GEN=General group call pickup

DIRG=Directed group call pickup

XGEN=Extended general call pickup

DIRD=Directed call pickup based on dialing plan

SOHO=Small office/home office pickup

S R

PICK_GROUP General call pickup group assigned.

0 - 4095 S O



A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PLAdds the caller ID block per line feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALLER_ID_BLK_PL.

MML commandsCHAN DN [DN] CNDB


A_AGCS-GTD5_4008_ADD_CALLING-NNAdds the calling name and number delivery. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALLING_NN.

Table 13: A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL




S O




Table 14: A_AGCS-GTD5_4008_ADD_CALLING-NN




S O



MML commandsCHAN DN [DN] [CLND] [CNDE]Note: One of CLND and CNDE should be set to Y.


A_AGCS-GTD5_4008_ADD_CDGGAdds the control party for the group features. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCDGG.




CLND Calling name delivery. Y/N S O

CNDE Calling number delivery. Y/N S O

Table 15: A_AGCS-GTD5_4008_ADD_CDGG




S O




Table 14: A_AGCS-GTD5_4008_ADD_CALLING-NN




MML commandsCHAN DN [DN] CDGG


A_AGCS-GTD5_4008_ADD_CFF-ACAdds the call forward fixed all calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_AC.

Table 16: A_AGCS-GTD5_4008_ADD_CFF-AC




S O




DAFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAFI_REM The type of call forwarding assigned.

normal - REM remote - RCF

S O

DAFI_REM_NUM The maximum number of simultaneous calls to forward.

0 - 255 S O

DAFI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O



MML commandsCHAN DN [DN] DAFI...DAFI_TODA


A_AGCS-GTD5_4008_ADD_CFF-BCAdds the call forward fixed busy feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_BC.

Table 17: A_AGCS-GTD5_4008_ADD_CFF-BC




S O




DBFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DBFI_REM The type of call forwarding assigned.


S O

DBFI_REM_NUM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DBFI_TODA Specifies whether the call forwarding all calls fixed feature can be activated by time of day/day of week basis.

Y/N S O



MML commandsCHAN DN [DN] DBFI...DBFI_TODA


A_AGCS-GTD5_4008_ADD_CFF-GRP-ACAdds the call forward group fixed all calls feature. It is implemented by the Java method com.metasolv.cartridge.os.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_GRP_AC.

MML commandsCHAN HGRP[HGRP] DAFG..


Table 18: A_AGCS-GTD5_4008_ADD_CFF-GRP-AC



HGRP_NUM Hunt group number. S R

DAFG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DAFG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R



A_AGCS-GTD5_4008_ADD_CFF-GRP-BCAdds the call forward group fixed busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_GRP_BC.

MML commandsCHAN HGRP[HGRP] DBFG..


A_AGCS-GTD5_4008_ADD_CFF-UCAdds the call forward fixed unanswered. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_UC.

Table 19: A_AGCS-GTD5_4008_ADD_CFF-GRP-BC




DBFG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBFG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R

Table 20: A_AGCS-GTD5_4008_ADD_CFF-UC




S O




MML commandsCHAN DN [DN] DNFI...


A_AGCS-GTD5_4008_ADD_CFV-ACAdds the call forward variable all calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_AC.



DNFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNFI_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNFI_RING Number of seconds the device is rung before the call is forwarded.

0 - 60 S O

DNFI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

Table 21: A_AGCS-GTD5_4008_ADD_CFV-AC



Table 20: A_AGCS-GTD5_4008_ADD_CFF-UC




MML commandsCHAN DN [DN] DAVI...DAVI_TODA



S O




DAVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAVI_REM Type of call forwarding assigned.


S O

DAVI_REM_NUM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DAVI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O

Table 21: A_AGCS-GTD5_4008_ADD_CFV-AC




A_AGCS-GTD5_4008_ADD_CFV-BCAdds the call forward variable busy calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_BC.

MML commandsCHAN DN [DN] DBVI...DBVI_TODA


Table 22: A_AGCS-GTD5_4008_ADD_CFV-BC




S O




DBVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DBVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DBVI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O



A_AGCS-GTD5_4008_ADD_CFV-GRP-ACAdds the call forward group all calls variable feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRP_AC.

MML commandsCHAN HGRP [HGRP] DAVG..


A_AGCS-GTD5_4008_ADD_CFV-GRP-BCAdds the call forward group variable busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRP_BC.

Table 23: A_AGCS-GTD5_4008_ADD_CFV-GRP-AC




DAVG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAVG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

Table 24: A_AGCS-GTD5_4008_ADD_CFV-GRP-BC




DBVG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R



MML commandsCHAN HGRP[HGRP] DBVG..


A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BCAdds the call forward group shared variable busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRPSH_BC.

MML commandsCHAN HGRP[HGRP] DBVS..


DBVG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R

Table 25: A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC




DBVS_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBVS_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R

Table 24: A_AGCS-GTD5_4008_ADD_CFV-GRP-BC




A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UCAdds the call forward group shared variable unanswered calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRPSH_UC.

MML commandsCHAN HGRP[HGRP] DBVS...


Table 26: A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC




DNVS_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNVS_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DNVS_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNVS_RING The number of rings provided before the call is forwarded.

0 - 60 S O



A_AGCS-GTD5_4008_ADD_CFV-UCAdds the call forward variable unanswered calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_UC.

MML commandsCHAN DN [DN] DNVI...


Table 27: A_AGCS-GTD5_4008_ADD_CFV-UC




S O




DNVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNVI_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNVI_RING Number of seconds the device is rung before the call is forwarded.

0 - 60 S O

DNVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O



A_AGCS-GTD5_4008_ADD_CHAdds the call hold feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCH.

MML commandsif HOLD_METHOD is DIGIT,CHAN DN [DN] FFBDif HOLD_METHOD is FLASHCHAN DN [DN] FFBF


Table 28: A_AGCS-GTD5_4008_ADD_CH




S O




HOLD_METHOD Flip flop by Digit method (DIGIT) or Flip flop by Flash metod (FLASH)

S R



A_AGCS-GTD5_4008_ADD_COTAdds the customer originated trace feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCOT.

MML commandsCHAN DN [DN] COTR


A_AGCS-GTD5_4008_ADD_CWAdds the call waiting feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCW.

Table 29: A_AGCS-GTD5_4008_ADD_COT




S O




Table 30: A_AGCS-GTD5_4008_ADD_CW




S O



MML commandsCHAN DN [DN] [CWCJ|CWD1|CWD2|CWD3|CWD4|CWD5|CWID|CWJI|CWT].[CODE|NCOD].[ANNO|FORW|RING]




CWT_CWCJ Call waiting with call join. Y/N S O

CWT_CWD1 Call waiting deluxe type 1. Y/N S O





CWT_CWID Calling identity delivery on call waiting.

Y/N S O

CWT_CWJI Call waiting with call join and calling identity delivery on call waiting.

Y/N S O

CWT_CWT Call waiting terminating/additional call offering.

Y/N S O

CW_ID_CODE Specifies whether the call waiting cancellation is allowed.

Y/N S O

CWDD_ANNO Route to call waiting deluxe default announcement.

Y/N S O

CWDD_FORW Forward to call forwarding on no answer digits.

Y/N S O

CWDD_RING Continue ringing. Y/N S O

Table 30: A_AGCS-GTD5_4008_ADD_CW





A_AGCS-GTD5_4008_ADD_CWOAdds the call waiting originating feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCWO.

MML commandsif CWO_CODE is Y,CHAN DN [DN] CWO.CODEotherwiseCHAN DN [DN] CWO.NCOD


Table 31: A_AGCS-GTD5_4008_ADD_CWO




S O




CWO_CODE Specifies whether the call waiting feature is code controlled.

Y/N S O



A_AGCS-GTD5_4008_ADD_DCWAdds the distinctive call waiting feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDCW.

MML commandsCHAN DN [DN] DRCW


A_AGCS-GTD5_4008_ADD_DPAdds the dial pulse feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDP.

Table 32: A_AGCS-GTD5_4008_ADD_DCW




S O




Table 33: A_AGCS-GTD5_4008_ADD_DP




S O



MML commandsCHAN DN [DN] SPTD


A_AGCS-GTD5_4008_ADD_DREnables the distinctive Ring feature on a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDR.

MML commandsCHAN HGRP[HGRP_NUM] SUBG2





Table 34: A_AGCS-GTD5_4008_ADD_DR




Table 33: A_AGCS-GTD5_4008_ADD_DP




A_AGCS-GTD5_4008_ADD_DSAdds the data security. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDS.

MML commandsCHAN DN [DN] [DAD|BDAD|CDAD]


Table 35: A_AGCS-GTD5_4008_ADD_DS




S O




DS_DAD Data line security assigned at all times.

Y/N S O

DS_BDAD Data line security assigned with the option to deactivate the feature for the duration of one call by dialing a code.

Y/

agcs gtd 5

Documents