agi32 - dals lighting, inc. led cylinder lighting... · 24 dalslighting.com outdoor indoor 1010,...
TRANSCRIPT
dalslighting.com24OUTDOOR INDOOR
1010, 1012LED CYLINDERS
Cylinders have always been a signature item for DALS. Here is a model which is designed to optimize LED technology. This LED
cylinder is available in 2 sizes and can be used as either an uplight or a downlight. Its powerful LED module is optimized with a
polished aluminum reflector and a substantial heat sink.
KEY FEATURES
• Up or down LED lighting • Efficient LED module • Available in 2 sizes
Ø4.25"
9.1"
1010
Ø4.25"
9.1"
25dalslighting.com
ORDERING EXAMPLE1010-LEDRA1-12-BK
This would order Model: 1020 Light source: 10W LED module, 900 lumens, 4000°K Voltage: 120V Finish: Painted black
MODEL
1010 4’’ LED cylinder
LEDRA1 10W LED module, 900 Lumens, 4000°K
1012 6’’ LED cylinder
LEDRA2 15W LED module, 1050 Lumens, 4000°K
SPECIFICATIONS
• The cylindrical housing is fabricated of extruded aluminum.
• The LED module is mounted on an aluminum heat sink to maximize heat dissipation.
• A bright aluminum reflector provides a 40° beam spread.
• The luminaire is sealed with a clear tempered glass lens.
• All components undergo a rigorous pre-paint treatment and are coated with baked powder coat paint, giving them a highly durable finish.
VOLTAGE
12 120V20 208V27 277V34 347V (Requires a step down transformer)
FINISH
BK Black SG Silver grey BR Bronze
9.1"
Ø5.7"
1012
9.1"
Ø5.7"
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 4 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Results Summary
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
Luminaire Schedule
Calculation Summary
Symbol Qty Label Description
Label CalcType Units Avg
Lum. Watts Lumens/Lamp Lum. Lumens LLF Filename
Max Min Avg/Min Max/Min12ft mounting Illuminance Fc 0.30 7.6 0.0 N.A. N.A.15ft mounting Illuminance Fc 0.29 4.9 0.0 N.A. N.A.
3 1010_BXRB-30E0740 10W 30 1010_BXRB-30E0740 10W 30 11.5 647.9 548 0.900 1010_BXRB-30E0740 10W 3000K.IE
8ft mounting Illuminance Fc 0.34 18.0 0.0 N.A. N.A.
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 2 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
0
-5
-10
-15
-20
-25
-15 -10 -5 0 5 10 15 20 25-25 -20 -25 -20 -15 -10 -5 0 5 10 15 20 25-25 -20 -15 -10 -5 0 5 10 15 20 25
MH: 8 MH: 12 MH: 15
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.2 0.4 0.2 0.1 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.2 2.2 3.8 2.3 0.2 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.8 5.2 18.0 5.1 0.5 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.2 0.3 0.2 0.1 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.4 0.9 1.1 1.0 0.4 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.2 1.0 2.3 4.0 2.3 1.0 0.2 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.4 1.2 4.5 7.6 4.3 1.1 0.3 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.2 0.5 0.6 0.5 0.3 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.2 0.6 0.8 1.1 0.9 0.6 0.4 0.1 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.1 0.5 0.8 2.1 3.2 2.6 1.1 0.6 0.1 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.1 0.5 1.0 3.1 4.9 3.9 1.6 0.6 0.1 0.0 0.0 0.0 0.00.2 fc
1 fc
5 fc 1 fc5 fc0.2 fc
0.2 fc1 fc
Luminaire ScheduleSymbol Qty Label Description Lumens/Lamp Lum. Lumens Lum. Watts LLF Filename
3 1010_BXRB-30E0740 10W 30 1010_BXRB-30E0740 10W 30 647.9 548 11.5 0.900 1010_BXRB-30E0740 10W 3000K.IES
Calculation SummaryLabel CalcType Units Avg Max Min Avg/Min Max/Min12ft mounting Illuminance Fc 0.30 7.6 0.0 N.A. N.A.15ft mounting Illuminance Fc 0.29 4.9 0.0 N.A. N.A.8ft mounting Illuminance Fc 0.34 18.0 0.0 N.A. N.A.
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 3 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Blainville, Quebec, J7C 5R8Dals Lighting, Inc., 30 Rolland-Brière, Suite 104 Project name : 1010
Prepared for: Juan Ernesto Quintana
0
-5
-10
-15
-20
-25
-15-10
-50
510
1520
25
-25-20
-25-20
-15-10
-50
510
1520
25-25-20
-15-10
-50
510
1520
25
MH: 8
MH: 12
MH: 15
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.10.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.10.1
0.10.1
0.10.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.10.2
0.40.2
0.10.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.22.2
3.82.3
0.20.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.85.2
18.0 5.10.5
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.10.1
0.10.1
0.10.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.10.2
0.30.2
0.10.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.40.9
1.11.0
0.40.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.2
1.02.3
4.02.3
1.00.2
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.4
1.24.5
7.64.3
1.10.3
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.10.1
0.10.1
0.10.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.20.5
0.60.5
0.30.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.2
0.60.8
1.10.9
0.60.4
0.10.0
0.00.0
0.0
0.00.0
0.00.0
0.10.5
0.82.1
3.22.6
1.10.6
0.10.0
0.00.0
0.0
0.00.0
0.00.0
0.10.5
1.03.1
4.93.9
1.60.6
0.10.0
0.00.0
0.0
0.2 fc1 fc
5 fc
1 fc5 fc0.2 fc
0.2 fc
1 fc
Luminaire Schedule
SymbolQty
Label
Description
Lumens/Lamp Lum. Lumens Lum. WattsLLF
Filename
31010_BXRB-30E0740 10W 30 1010_BXRB-30E0740 10W 30
647.9548
11.50.900
1010_BXRB-30E0740 10W 3000K.IES
Calculation Summary
Label
CalcType
UnitsAvg
MaxMin
Avg/Min Max/Min
12ft mounting
Illuminance
Fc0.30
7.60.0
N.A.N.A.
15ft mounting
Illuminance
Fc0.29
4.90.0
N.A.N.A.
8ft mounting
Illuminance
Fc0.34
18.00.0
N.A.N.A.
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 5 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 6 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 7 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 8 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.05
Page 9 of 9Units:
Filename: dals Project 1010.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8
Project name : 1010Prepared for: Juan Ernesto Quintana
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 4 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Results Summary
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana
Luminaire ScheduleSymbol Qty Label Description Lum. Watts
Calculation Summary
Lumens/Lamp Lum. Lumens LLF Filename
Label CalcType Units Avg Max Min Avg/Min Max/Min12ft mounting Illuminance Fc 0.44 6.0 0.0 N.A.
842 0.900 1012_QXRA30E0800_ 15W 3000K .I
N.A.15ft mounting Illuminance Fc 0.42 3.7 0.0 N.A. N.A.8ft mounting Illuminance Fc 0.48 13.3 0.0
3 1012_QXRA30E0800_ 15W 30 1012_QXRA30E0800_ 15W 30 34 1139.5
N.A. N.A.
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 2 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana
0
-5
-10
-15
-20
-25
-15 -10 -5 0 5 10 15 20 25-25 -20 -25 -20 -15 -10 -5 0 5 10 15 20 25-25 -20 -15 -10 -5 0 5 10 15 20 25
MH: 8 MH: 12 MH: 15
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.2 0.2 0.1 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.2 1.7 2.2 1.7 0.3 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 1.8 3.9 6.0 4.0 1.8 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 2.2 6.8 13.3 7.0 2.3 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.2 0.3 0.2 0.1 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.1 0.1 0.7 0.9 1.0 0.9 0.6 0.2 0.1 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.1 0.7 1.1 1.7 2.0 1.7 1.1 0.7 0.1 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.2 0.9 1.7 3.0 3.9 3.0 1.8 0.9 0.2 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.4 1.0 2.1 4.1 6.0 4.1 2.2 1.0 0.4 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.0 0.0 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.0 0.1 0.1 0.1 0.2 0.2 0.1 0.1 0.0 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.1 0.2 0.4 0.5 0.6 0.6 0.5 0.3 0.1 0.0 0.0 0.0 0.0
0.0 0.0 0.0 0.0 0.2 0.5 0.7 0.8 1.0 0.9 0.7 0.5 0.3 0.1 0.0 0.0 0.0
0.0 0.0 0.0 0.1 0.4 0.6 1.0 1.4 1.7 1.5 1.2 0.7 0.5 0.2 0.0 0.0 0.0
0.0 0.0 0.0 0.1 0.5 0.8 1.4 2.2 2.8 2.5 1.7 1.0 0.6 0.3 0.0 0.0 0.0
0.0 0.0 0.0 0.2 0.5 0.9 1.6 2.7 3.7 3.0 2.0 1.1 0.6 0.3 0.0 0.0 0.00.2 fc
1 fc
5 fc 0.2 fc1 fc5 fc 0.2 fc1 fc
Luminaire ScheduleSymbol Qty Label Description Lumens/Lamp Lum. Lumens Lum. Watts LLF Filename
3 1012_QXRA30E0800_ 15W 30 1012_QXRA30E0800_ 15W 30 1139.5 842 34 0.900 1012_QXRA30E0800_ 15W 3000K .IES
0.42 3.7 0.0 N.A. N.A.8ft mounting Illuminance Fc 0.48 13.3 0.0 N.A. N.A.
Calculation SummaryLabel CalcType Units Avg Max Min Avg/Min Max/Min12ft mounting Illuminance Fc 0.44 6.0 0.0 N.A. N.A.15ft mounting Illuminance Fc
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 3 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Blainville, Quebec, J7C 5R8Dals Lighting, Inc., 30 Rolland-Brière, Suite 104
Prepared for: Juan Ernesto Quintana
0
-5
-10
-15
-20
-25
-15-10
-50
510
1520
25
-25-20
-25-20
-15-10
-50
510
1520
25-25-20
-15-10
-50
510
1520
25
MH: 8
MH: 12
MH: 15
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.1
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.10.1
0.10.1
0.10.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.10.1
0.20.2
0.10.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.21.7
2.21.7
0.30.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
1.83.9
6.04.0
1.80.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
2.26.8
13.3 7.02.3
0.10.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.10.1
0.10.1
0.10.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.10.2
0.30.2
0.10.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.10.1
0.70.9
1.00.9
0.60.2
0.10.0
0.00.0
0.0
0.00.0
0.00.0
0.10.7
1.11.7
2.01.7
1.10.7
0.10.0
0.00.0
0.0
0.00.0
0.00.0
0.20.9
1.73.0
3.93.0
1.80.9
0.20.0
0.00.0
0.0
0.00.0
0.00.0
0.41.0
2.14.1
6.04.1
2.21.0
0.40.0
0.00.0
0.0
0.00.0
0.00.0
0.00.0
0.00.0
0.10.1
0.00.0
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.00.1
0.10.1
0.20.2
0.10.1
0.00.0
0.00.0
0.0
0.00.0
0.00.0
0.10.2
0.40.5
0.60.6
0.50.3
0.10.0
0.00.0
0.0
0.00.0
0.00.0
0.20.5
0.70.8
1.00.9
0.70.5
0.30.1
0.00.0
0.0
0.00.0
0.00.1
0.40.6
1.01.4
1.71.5
1.20.7
0.50.2
0.00.0
0.0
0.00.0
0.00.1
0.50.8
1.42.2
2.82.5
1.71.0
0.60.3
0.00.0
0.0
0.00.0
0.00.2
0.50.9
1.62.7
3.73.0
2.01.1
0.60.3
0.00.0
0.0
0.2 fc1 fc
5 fc
0.2 fc
1 fc5 fc
0.2 fc1 fc
Luminaire Schedule
SymbolQty
Label
Description
Lumens/Lamp Lum. Lumens Lum. WattsLLF
Filename
31012_QXRA30E0800_ 15W 30 1012_QXRA30E0800_ 15W 30
1139.5842
34
0.9001012_QXRA30E0800_ 15W 3000K .IES
0.423.7
0.0N.A.
N.A.
8ft mounting
Illuminance
Fc0.48
13.30.0
N.A.N.A.
Calculation Summary
Label
CalcType
UnitsAvg
MaxMin
Avg/Min Max/Min
12ft mounting
Illuminance
Fc0.44
6.00.0
N.A.N.A.
15ft mounting
Illuminance
Fc
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 5 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 6 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 7 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 8 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana
Project name : 1012 Date:3/12/2014AGi32 Version 14.6.13
Total Time (Hrs.): 1.13
Page 9 of 9Units:
Filename: dals Project 1012.AGI
By : Peer Eric Moldvar
DISCLAIMER: Calculations have been performed according to IESNA & CIE standards and goodpractice. Some differences between measured values and calculated results may occurdue to tolerances in calculation methods, testing procedures, component performance, measurement techniques and field conditions such as voltage and temperature variations.Input data used to generate the attached calculations such as room dimensions, reflectances, furniture and architectural elements significantly affect the lightingcalculations. If thereal environment conditions do not match the input data, differences will occur between measured values and calculated values.
Dals Lighting, Inc., 30 Rolland-Brière, Suite 104Blainville, Quebec, J7C 5R8 Prepared for: Juan Ernesto Quintana