Ahmed Mohamed KhalilMobile: +2- (010) 1588424 (Egypt)

: +966-555-3128-65 ( KSA)

Ahmed.khalil.3@Aramco.comAhmedkhalilx@gmail.com

Pre master degree from Cairo University, Degree: good

Suez Canal University Bachelor of Engineering, May 2003 Major: Petroleum Minors: Drilling, Production and Reservoir Cumulative Degree: Good Final Year Project Degree: Very Good

Education

Arabic- Native English-: fluent German-fair

Language

Date of Birth : 16th Nov. 1981 Marital Status : married

Personal Details

June 2016- Present: Working as Country Engineering Leader for Halliburton LSTK:Responsibilities:

Follow up the operations on 15 LSTK rigs working on Drilling and Re-entry wells.

Monitor and Develop the drilling Engineers thru a wellsite operational/ engineering training programs.

Monitor and coaching the Senior & team lead engineers.

Review all Risk assessment for any new wells. Review all drilling programs before submission to

the Client. Meet with the client to close any disputes,

especially for OOS operations and OOS plans. Provide the technical support to the team leads

and engineers whenever required for both client discussion and/or internal decision.

Fill in for Project Managers in all three projects when needed.

Explore the new technologies with the client and/or internally within CPM.

Ensure that all Programs adhere with our HMS. Monitor and Develop the DEAL engineers thru a

set program. Ensure that all engineers are aware and familiar

with the four control points and Five Focus areas. Supervise the RTOC team to install/run/utilize

Openwells on all of our CPM rigs.

Work Experience

January 2014- June 2016: working as Engineering supervisor for South Ghawar/Khurais projects (LSTK) for Aramco thru HPM.

Responsibilities: Supervise Senior and Junior drilling engineers that

following up the nine drilling rigs (Sino/TDI). Review the drilling program & End of well reports. Follow up the daily operation for the rigs as focal

point for implementation of lesson learned. Review AAR for each well. Review wells Profit & loss sheets. Cover project managers shortage whenever

needed. Sep. 2010- January 2014: Working for Aramco

(south Ghawar field) on LSTK project through Halliburton Project Management (HPM) as a Sr. Drilling Engineer.

Responsibilities : Working in South Ghawar (Abqaiq) following up rig

daily drilling operation. Preparing drilling programs. Planning wells with different trajectory (vertical &

Horizontal); planning includes (Offset wells study, Direction profile, bit selection, casing profile & design, cement, mud program, hydraulics calculation, BHA design, drilling time).

Performing performance tracking, pick up lesson learned and looking for a new possibilities to improve the performance.

Frequent visits to the rigs. Prepare end of well reports. Contact Halliburton divisions to move the required

services on time. Using LandMark Package for planning.

March 2010- Sept. 2010: Worked for Halliburton Project Management (HPM) as Technical Lead Engineer from Dubai to Prepare and review all technical aspects for Iraq tenders for ENI & Bp turnkey & W.O projects.

Oct. 2008- March 2010: Worked as a Sr. Drilling

Engineer in Hassi Messaoud field for SONATRACH thru HPM (Algeria).

Responsibilities : Working in Hassi Messaoud (24 Feb. Base)

following up daily operation for 6 Rigs operates by HPM.

Preparing drilling programs for Hassi Messaoud and Berkaoui fields.

Planning wells with different trajectory (vertical & Horizontal); planning includes (Offset wells study, Direction profile, bit selection, casing profile & design, cement, mud program, hydraulics calculation, BHA design, drilling time).

Work Experience

Performing performance tracking, pick up lesson learned and looking for a new possibilities to improve the performance.

Frequent visits to the rigs. Prepare end of well reports. Using Land Mark Package for planning (Compass,

casing seat, Stress check & Well Planning). Using DFW for reporting QA/QC.

Worked on SONATRACH for HPM to perform a complete study for Hassi TARAF & Hassi DZBAT fields includes more than 16 well and submits a complete proposal for drilling wells for a Turnkey project.

Worked for HPM on study for Naftogas in A.U.E to achieve best well planning for well Hamad-1 exploratory well.

Study for Dubai Petroleum (DPE) include the best

performance available to enhance the cost saving. Worked on a study on western desert for AGIBA/

ENI including the best performance enhancement for well planning and well design.

Plan & design two drilling wells for Halliburton as training wells.

Help and support in preparation of ROSNEFT (Algeria) tender.

Help in the initial preparation for STATOIL tender for ultra deep water project.

June 2005- Oct. 2008: Worked for PETROBEL/ENI as a Sr. Drilling Engineer in head office, Cairo.

Responsibilities : Carrying out the superintendent duties. Preparing drilling programs for Sinai fields. Planning wells with different trajectory (vertical,

Deviated & Horizontal); planning includes (Offset wells study, Direction profile, bit selection, casing profile & design, cement, mud program, hydraulics calculation, BHA design, drilling time & AFE).

Follow up drilling operations in G.O.S & Mediterranean Sea form Cairo head office.

Monitoring progress & cost charts. Evaluate performance of drilling contractors

(Drilling rigs, Bits, Direction Drilling, & Liner & CSG Equipments).

Evaluate New Tenders based on history performance.

Revise and check contractors' invoices. Prepare End of well reports. Using Compass & Stress check for planning. Using DFW for reporting QA/QC.

Oct. 2003- June 2005: worked for PETROBEL/ENI

as a Drilling Supervisor.Worked as company man in Abu- Rudeis Fields Responsible for:

Implementing the well plan on the rig site. Preparing drilling reports; daily, failure…etc. supervised all profiles of wells "vertical, highly

deviated and horizontal" using the steerable and the most advanced technology rotary steerable systems "power drive and auto track”

Supervised both open hole and cased hole side

tracks. Supervised hydraulic Frac, nitrogen lifting & TCP.

August 2003-Oct. 2003: Worked as an night Supervisor for PETROBEL/ENI.Worked as night company man Responsible for: Performed all engineering calculations during the

drilling operation; Hydraulics, BHA design, cement volume…etc.

Assisted in performing the first Multi-Later well in Egypt “Level-4”, completed with Expandable Technology, Well 112-90 By Rig EDC 5.

Handling the requested material for the drilling

operation. Following up the drilling operation as planning.

Worked as a consultant company man in Magawish Oil Company in G.O.S.

<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>><<<<<<<<<<<<<

Worked as a consultant company man in VEGAS Oil & Gas in Western Desert.

}}

Worked as a bit runner in both G.O.S & Western Desert with different companies

Consulting Experience

Business development leadership course (BLD1) by TAXES A&M University.

Financial for non-financial leaders (FNFL) by TAXES A&M University.

Risk Management in Dubai by KSI. FAST TRACK Courses by Halliburton for 2

months includes: Well planning & well design course Decision space course for collaborative well plan Well cat course for tubing Design in HPHT wells Stress check & casing seat courses for casing

Design Compass course for well trajectory Wellplan course for torque & drag, hydraulic, well

control, surge & swab & differential stuck calculations

Business development Academy courses in San Antonio, TX by Halliburton.

Cement school Course by Halliburton. Open and cased hole logging by Halliburton. Risk Management & Risk assessment course

Courses

by Halliburton. Tap Root Investigation course by Halliburton. Back safety ,pressure safety & confined

space entry courses by Halliburton. HSE, Environmental, Radiation & Explosive

awareness courses by Halliburton. IWCF course with full mark degree "100 %" by

Randy Smith. Well Cap course by Al-Khobar Training Company. Stuck Pipe prevention course by Al-Kobar

training company. Rig Inspection course by MODUSPEC Hole cleaning & DFG software course by

Baroid ( BASP- Halliburton) MDT and Surface Fluid Sampling Course By

Scientific Petroleum Services Drill Bits Technology course by smith Bits. Data Entry For DFW BY Halliburton Land Mark Summer Training in Dowell Schlumberger for

21 day in shukair Base.

Good user for DFW (DIMS for Windows). Using Landmark Drilling package for well design &

planning.

Platforms: Windows, Microsoft Word, Excel and Power point.

Computer Skills