air-cooled belt drive type screw air compressors · pdf file39 detroit air compressor...
TRANSCRIPT
39 DETROIT AIR COMPRESSOR
AIR-COOLED BELT DRIVE TYPE SCREW AIR COMPRESSORSi www.detroitcompressors.com' www.titanair.co.za
DETROIT
Oil FilterThe screw on oi l filter makes servicing
convenient. This filter eliminates oil
impurities and other particles produced
by wear and tear. High quality oil
f i l t rat ion extends the service l i fe of
rotors, bearings and other moving parts.
Thermostatic Control ValveDesigned specifically for high ambient temperature and high humidity, this valve ensures
the machine reaches optimum working temperature quickly. Oil temperature is also
carefully controlled to maintain viscosity and prevent emulsification, thus ensuring long
life of all working parts.
40 DETROIT AIR COMPRESSOR
www.detroitcompressors.comwww.titanair.co.za
Efficient Cooling SystemUtilising production methods and design from West Germany the cooling system was designed to provide sustainable and efficient
operation in high temperature high humidity environments such as Asia Australia and Africa. The new cross—exchange cooler not
only increases exchange capacity by 10% but also is designed to resist chemical damage.
Air/Oil SeparatorScrew on design of this separator allows for efficient servicing. The separator wil l remove oil particles from the air down to a
ratio of 1—2 parts per mil l ion. Eff icient separation means post—treatment of air w i l l be economical. Cleaner air means low
maintenance costs on pneumatic equipment.
MotorWorld—class electric motor features Grade F insulation and IP54 protection. Bearings are SKF.
Loading HeadThis newly designed and improved intake controll system ensures economic control and protection of the screw. The control
system has been redesigned to be simpler and more reliable. Many unnecessary parts have been removed. The air intake f i l ter
eliminates dust and other harmful particles that may cause premature wearing of the machine. Upon startup of the machine, the
control system wil l close the intake valve reducing start—up load. Shut down procedure wil l release pressure from the oil reservoir
and prevent lubricant leakage. The new design has resulted in reduced air intake noise.
World-Class AirendDetroit Air Screws are leaders in their field due to stringent design and production systems. All air ends are sourced from German
manufacturers. Outstanding quality and reliability has been achieved combined with the benefit of low cost. We offer belt drive
systems up to 75KW and direct drive up to 500KW. However, direct drive systems are also available for 75KW and down. Each
system can be customised for the customers requirements.
43 DETROIT AIR COMPRESSOR
The ideal compressed air installation to suit all industrial requirementswww.detroitcompressors.comwww.titanair.co.za
Appropriate installation
gj Compressor
ggg Isolating valve
fc^ Air receiver
gB Automatic drain valve
B3I Ceramic pre—filter qf type Sum
Q Air dryer
fc-^ Automatic condensating drain
EB Precise filter pf type 1um
feB Precise filter hf type 0.01 um
Bjpiy Activated carbon filter cf type 0.003 u
Kil Water—oi I separator
Air conveying i air cleaning and
basic applications.
Blowing dust.
]All—purpose professional sandblasting,
pneumatic tools.
Spray painting, plating and injection
molding.
Food industry, process and chemicals
industy, and such.
AIR-COOLED BELT DRIVEN SCREW AIR COMPRESSOR TECHNICAL DATA
MODEL T-10 T-15 T-20 T-30 T-40 T-50 T-60 T-75 T-100 T-125 T-250
Air-Cooled
Free Air Delivery
/Discharge Pressure
CFM/BAR
42.4/7
38 . 9/8
31 .8/10
24.7/12
63.6/7
65 . 5/8
49.4/10
42.4/12
Discharge Temp
Lubricant L 12
70.6/0.7
63.6/8
56.5/10
49.4/12
16
Oil contents in air
Nois Level dB(A)
127.2/7
1 20 . 0/8
106.0/10
91 .8/12
22
173.1/7
162.5/8
141 .3/10
127.2/12
215.5/7
204 . 9/8
180.1/10
162.5/12
254.3/7
247.2/8
240.2/10
211 9/12
363.8/7
339.1/8
300.2/10
268.4/12
459.1/7 | 565.1/7
434.4/8 536.9/8
385.0/10 480.4/10
336.1/12 434.4/12
1130.2/7
1024.3/8
918.3/10
777.0/12
Working temperature ; below+1 5'C
26
<3~5ppm
54 60
70-72 ±2
Drive Type Belt
110
72-78 ±3 80-85
Set Pressure ofrelief valve
(D
cto
c/}co
Dim
en
s
Power KW
StartMethod
+0. 1Mpa
7 .5
Direct dr ive
11 15 22 30 37 45 55 75 90 185
Y-AStarter
Voltage/Frequency 380V/50Hz
Isolation grade Grade F
Length MM
Width MM
Height MM
Net Weight Kg
650
870
1200
290
830
1000
1290
410 420
1150
950
1400
580
1270
1070
1500
770 7801
790
1700 2100
1400 1600
1 650 2000
1440 1 540 2480
2900
1750
2100
4500
44 DETROIT AIR COMPRESSOR
www.detroitcompressors.comwww.tiianair.co.za
AIR-COOLED DIRECT DRIVEN SCREW AIR COMPRESSOR TECHNICAL DATA
MODEL T-75 T-100 T-150 T-175 T-200 T-300 T-350
Air—Cooled
Discharge Temp Working temperature ;below+15-18°C
Free Air Delivery
/Discharge Pressure
CFM/BAR
363.8/7
339.1/8
300.2/10
275.5/12
457.8/7
434.4/8
385.0/10
346.1/12
717.0/7
664.0/8
565.1/10
459.1/12
830.0/7
745.3/8
660.5/10
565.1/12
936.0/7
847.7/8
787.6/10
671 .1/12
1342.2/7
1211 .5/8
1066.7/10
918.3/12
1547.0/7
1462.2/8
1335.1/10
1165.6/12
Lubricant L
Nois Level dB(A)
54
72-78 ±3
90
75-80
110I
" 80-85
125
Drive Type Direct drive
Power KW 551 j
<nCo«Jc05p
b
Length MM 2000
Width MM 1400
Height MM 1650
Net Weight Kg 1630
75 110 132
1 700 2650
1400 1600
1650 1800
1 680 2570 2770
160
2900
1750
2050
3700
220 250
3800
2200
2200
5560 5670
WATER-COOLED DIRECT DRIVEN SCREW AIR COMPRESSOR TECHNICAL DATA
MODEL T-75 T-100 T-125 T-150 T-175 T-200 T-250 T-300 T-350 T-400
Water-Cooled
Ferr Air Delivery
/Discharge Pressure
CFM/BAR
363.8/7
339.1/8
300.2/10
268.4/12
Discharge Temp
Inlet Water Temp
459.2/7 565.1/7 717.0/7
434.4/8 ! 536.9/8 664.0/8
385.0/10 ! 480.4/10
346.1/12 434.4/12
830.0/7
780 . 6/8
936.0/7
847 . 7/8
530.0/10 660.5/10 787.7/10
459.2/12 565.1/12 671.1/12
1130.2/7 1342.2/7
1024.3/8
918.3/10
777.0/12
1215.0/8
1066.7/10
918.3/12
1483.4/7 1836.6/7
1430.5/8 1713.0/8
1345.7/10 1571.7/10
1222.1/12 1501.1/12
Environmet temp— 5-45°C
Water temp :+5°C
Discharge temp <40'C
Lubricant L
Nois
50
Level dB(A) 68 + 2 72 + 2
Drive Type
Power KW00Co
Dim
ens
Net
Outle
Length MM
Width MM
Height MM
Weight Kg
Pipe DiameterCooling Water Iniet andOutlet Pipe Diameter
Belt
55 75
2000 1 700
1 400 1 400
1650 1650
1 530 1 580
G2"
61*
75 100
75 + 2
Direct drive
90
2100
1600
110 132 160 185
2650 2650 2900 2900
1 600 1 600 1 750
2000 1800 1800 2050!
2480
DN50
2450 2600 3500
DN65
n'»bl-j
1750
2100
4300
220
150
82 ±2
250 300
3800 4050
2200
2200
5350 5450
DN80
G2"
2250
2350
7900
DN100
DN80
35 DETROIT AIR COMPRESSOR
DETROIT SCREW AiR COMPRESSOR [VERDICHTER
www.detroitcompressors.comwww.iitanair.co.za
SCREW LCD CONTROLLER
TATING LOCAL
Intelligent Controller
Intelligent Controller• Intuitive interface allows for unsupervised 24 hour operation. Full auto shut down and test functions.
• Easy to learn and use.
Electrical System• Intelligent automatic PLC.
• European AC contactor.
• German built electro—magnetic valve ensures precise function and long service life.
• World—class electric motor features Grade F insulation and IP54 protection. SKF bearings are used.
Data Protection FunctionMachine operation history and parameters are not volot i le.
Real-time Running DisplayReal—time data displays on the LCD screen.
Usage ControlFactory codes ensure the safety of the operation parameters and protect it from unauthorized users.
37 DETROIT AIR COMPRESSOR
COMPACT/SEPARATED SCREW COMPRESSORSwww.detroitcompressors.comwww.titanair.co.za
The best cost to performance ratio
Due to ieading design concepts and outstanding performance, the machine can produce more compressed air with the lowest
energy consumption, thus lowering energy costs and increasing profits.
During the l i fe of an air screw the operational energy costs often exponentially outweigh the purchase cost of the machine. Detroit
Air Compressors incorporate energy saving concepts into every part of the design and production process. Our goal is not only to
provide you with the best value machine, but also the lowest energy consumption in the market. Detroit Air Compressors offer
unprecedented energy savings across the range.