air-diffusion flowbar - swegon
TRANSCRIPT
KEY FEATURES ○ High capacity single slot diffuser available in five slot widths of 25mm, 38mm, 51mm, 63mm and 76mm
○ Surface mounted and plaster frame border frames available
○ Choice of HT (High Throw) series horizontal or JT (Jet Throw) series vertical air patterns
○ Curved Sections
○ Ceiling or Sidewall Applications
○ Modular or Continuous Lengths
○ Mitred Corner Pieces
○ Angled End Sections
○ Adjustable Discharge Pattern
○ Concealed Fixing
○ Matching Plenum Boxes
AIR-DIFFUSION FLOWBARArchitectural High-Capacity Linear Slot Diffuser
FLOWBAR
2Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Introduction FlowBar is an architecturally designed high capacity linear slot diffuser. It is designed to combine a high air handling capacity with maximum flexibility and is suitable for either ceiling or sidewall applications. The flexibility of the system can blend into a design or provide contrast with its striking but simple design.
FlowBar is a flexible system that can provide straight lines or curves to blend with other architectural elements and enhance the overall concept of the project.
ContentsIntroduction ��������������������������������������������������������2
Specification ���������������������������������������������������������3High Throw Series (HT) ............................................... 3
Jet Throw Series (JT) ................................................... 3
Air Patterns�����������������������������������������������������������4
Flange Styles ��������������������������������������������������������5
Curved Sections ���������������������������������������������������6
Corner Sections ����������������������������������������������������7
Application Photos ����������������������������������������������8
Performance Data ���������������������������������������������14Continuous Slot Plenum High Throw (HT) ................ 14
FlowBar with Swegon Plenum - High Throw (HT) ...... 15
Continuous Slot Plenum Jet Throw (JT) ..................... 19
FlowBar with Swegon Plenum - Jet Throw (JT) .......... 20
Standard Fixing Details �������������������������������������24
Dimensions ��������������������������������������������������������26High Throw (HT) Dimensions ..................................... 26
Jet Throw (JT) Dimensions ......................................... 27
Slot Run Dimensions ................................................. 27
End Border Configurations ........................................ 28
Standard Installation Details ����������������������������29Installation Details - HT and JT ................................. 29
Installation Details - JT only ....................................... 31
Diffuser Ordering Key ���������������������������������������32
Plenum Boxes �����������������������������������������������������33Specifications ............................................................ 33
Pressure Drops & Sound Rating ................................. 34
Plenum Box Dimensions ............................................ 35
Plenum Accessories ................................................... 36
Plenum Ordering Key ����������������������������������������32
3200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
SpecificationHigh Throw Series (HT)
• The High Throw series is primarily designed for ceiling applications and allows the air diffuser to become inconspicuous, whilst fully integrating into the ceiling system.
• The FlowBar systems satisfy both architectural and engineering requirements for designing an air distribu-tion system that will maintain optimum room air conditions whilst being efficient yet inconspicuous.
• Integral pattern controllers are 600mm in length allowing the airstream to be directed left and right for horizontal and vertical airflow.
• Standard slot sizes are 25mm, 38mm, 51mm, 63mm and 76mm with single section lengths available up to 2400mm.
• Frame styles 66 (surface mounted), 22 and 55 (plaster frame border) and 11 flangeless are available as standard.
• Factory engineered plenum boxes are supplied to ensure a trouble free installation and to ensure published performance data is met.
HT Configurations• FL-10-HT / 25mm Slot
• FL-15-HT / 38mm Slot
• FL-20-HT / 51mm Slot
• FL-25-HT / 63mm Slot
• FL-30-HT / 76mm Slot
Jet Throw Series (JT)
• The Jet Throw series has pattern flow controllers to allow the airstream to be jetted in a horizontal direction (sidewall mounted) whilst fully integrating into the wall system.
• The FlowBar systems satisfy both architectural and engineering requirements for designing an air distribu-tion system that will maintain optimum room air conditions whilst being an integral component of the architectural concept of the project.
• Integral pattern controllers 600mm in length allow the airstream to be directed vertically left and right (ceiling application) and up and down (sidewall application) at a 45˚ angle.
• Jet Throw pattern controllers allow extended throws in typical high bay applications for heated and/or cooled air.
• Jet Throw pattern controllers are useful along perim-eter walls where heated air can be directed downward.
• Standard slot sizes are 25mm, 38mm, 51mm, 63mm and 76mm with single section lengths available up to 2400mm.
• Frame styles 66 (surface mounted), 22 and 55 (plaster frames) and 11, flangeless are available as standard.
• Factory engineered plenum boxes are supplied to ensure a trouble free installation and to ensure published performance data is met.
JT Configurations• FL-10-JT / 25mm Slot
• FL-15-JT / 38mm Slot
• FL-20-JT / 51mm Slot
• FL-25-JT / 63mm Slot
• FL-30-JT / 76mm Slot
FLOWBAR
4Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Air Patterns
High Throw (HT)
Horizontal Left Horizontal Right Vertical
Jet Throw (JT)
Horizontal Upward Downward
5200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Flange Styles
Type 66 Type 55
Type 22 Type 11
FLOWBAR
6Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Key
Curved Supply
• Curving is only possible with the HT model using border types 11/22/66.
• Please contact our technical team to discuss curved FlowBar in more detail including any special applica-tions not covered in this product sheet.
B = Overall Width T = Overall Length C = Overall Arc Length L = Slot Width
Curved Sections
Minimum Curve Radius
HT High Throw - Border 22
Slot Width Min Radius (mm)
FL10 25 1700
FL15 38 1700
FL20 51 45000
HT High Throw - Border 11
Slot Width Min Radius (mm)
FL10 25 800
FL15 38 1200
FL20 51 2100
HT High Throw - Border 66
Slot Width Min Radius (mm)
FL10 25 800
FL15 38 1200
FL20 51 2100
7200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Slot/Style Width T B
Border 66 25 200 95
Border 22 25 200 107
Border 55 25 200 70
Border 11 25 200 70
Border 66 38 200 121
Border 22 38 200 133
Border 55 38 200 95
Border 11 38 200 95
Border 66 51 200 146
Border 22 51 200 158
Border 55 51 200 121
Border 11 51 200 121
Border 66 63 300 172
Border 22 63 300 172
Border 55 63 300 146
Border 11 63 300 146
Border 66 76 300 197
Border 22 76 300 197
Border 55 76 300 172
Border 11 76 300 172
Corner Sections90˚ Flat Corner Multidirection Supply
* Specify Angle
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Comments:Rev:
Drawn By: M.Bishop
Approved By:
.Client:
Flow Bar Diffuser
.
Drawing No:
Date:
Date:
By: Date:
15/05/18Date:
Created using drawing template RAM-F-027 Issue E 12/16
Checked By:
Sheet
RevDrawing No: All dimensions in mm. Do NOT scale from drawing. If in doubt ASK!
The information disclosed herein was originated by and is the property of Swegon Air Management Limited (SAML). SAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction rights thereto. This does not apply to any vendor parts.
Sheet Rev
Internal & External Flow Bar Sections
Product:
Project:
Description:
A3Third AngleProjection
© Swegon Air Management LimitedStourbridge Road, Bridgnorth, Shropshire
WV15 5BB
Tel: +44 (0)1746 761921Fax: +44 (0)1746 766450
www.swegonair.co.uk
Notes:-
All SIZES ARE TAKEN FROMFACE OF DIFFUSER
W Clarke 15/05/18
6
27
3
G Mansell 15/05/18
T
T
T
T
FACE OF FLOWBAR
FACE OF FLOWBAR
INTERNAL
EXTERNAL
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
Comments:Rev:
Drawn By: M.Bishop
Approved By:
.Client:
Flow Bar Diffuser
.
Drawing No:
Date:
Date:
By: Date:
15/05/18Date:
Created using drawing template RAM-F-027 Issue E 12/16
Checked By:
Sheet
RevDrawing No: All dimensions in mm. Do NOT scale from drawing. If in doubt ASK!
The information disclosed herein was originated by and is the property of Swegon Air Management Limited (SAML). SAML reserves all patent, proprietary,design, use, sale, manufacturing and reproduction rights thereto. This does not apply to any vendor parts.
Sheet Rev
Internal & External Flow Bar Sections
Product:
Project:
Description:
A3Third AngleProjection
© Swegon Air Management LimitedStourbridge Road, Bridgnorth, Shropshire
WV15 5BB
Tel: +44 (0)1746 761921Fax: +44 (0)1746 766450
www.swegonair.co.uk
Notes:-
All SIZES ARE TAKEN FROMFACE OF DIFFUSER
W Clarke 15/05/18
6
27
3
G Mansell 15/05/18
T
T
T
T
FACE OF FLOWBAR
FACE OF FLOWBAR
INTERNAL
EXTERNAL
Internal Corner
External Corner
FLOWBAR
8Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Application Photos
9200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
FLOWBAR
10Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
11200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
FLOWBAR
12Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Performance Data Continuous Slot Plenum High Throw (HT) Data based on active section 1200 long
25mm Slot Width
Air Flow, l/s-m 36 58 79 101 122 144 165
Static Pressure, Pa 7 18 34 55 81 112 148
NC (Noise Criteria) <10 16 26 33 39 44 49
Throw, m 1.5 - 2.5 - 4.3 2.8 - 4 - 5.5 3.8 - 4.5 - 6.5 4.3 - 5.3 - 7.3 4.5 - 5.8 - 8.3 5.3 - 6 - 8.8 5.5 - 6.8 - 9.5
FL-10
38mm Slot Width
Air Flow, l/s-m 43 65 86 108 129 151 173
Static Pressure, Pa 8 18 32 51 73 99 129
NC (Noise Criteria) <10 14 24 31 37 42 48
Throw, m 1.8 - 3 - 5 3 - 4.3 - 5.8 4 - 5 - 6.8 4.3 - 5.5 - 7.5 5 - 5.8 - 8.3 5.3 - 6.5 - 8.8 5.5 - 6.8 - 9.8
FL-15
51mm Slot Width
Air Flow, l/s-m 43 72 101 129 158 187 216
Static Pressure, Pa 5 14 28 46 68 95 127
NC (Noise Criteria) <10 11 22 30 36 41 46
Throw, m 1.5 - 2.8 - 5 2.8 - 4.3 - 6 4 - 5.3 - 7.3 5 - 5.8 - 8.3 5.3 - 6.5 - 9.3 5.8 - 7 - 10 6 - 7.5 - 10.8
FL-20
63mm Slot Width
Air Flow, l/s-m 43 79 115 151 187 223 259
Static Pressure, Pa 3 10 22 38 58 82 110
NC (Noise Criteria) <10 11 23 31 38 43 48
Throw, m 1.3 - 2.5 - 5 3 - 4.5 - 6.5 4.3 - 5.5 - 8 5.3 - 6.5 - 8.8 5.8 - 7 - 10 6.5 - 7.5 - 11 6.8 - 8.3 - 12.8
FL-25
76mm Slot Width
Air Flow, l/s-m 43 86 129 173 216 259 302
Static Pressure, Pa 3 11 25 44 69 99 135
NC (Noise Criteria) <10 <10 18 27 34 40 45
Throw, m 1 - 2.3 - 4.5 3 - 4.5 - 6.8 4.5 - 5.8 - 8.3 5.5 - 6.8 - 9.8 6 - 7.5 - 10.8 6.8 - 8.3 - 12 7.3 - 8.8 - 12.8
FL-30
Length, mm 600 1200 1800 2400 3000
Supply -3 0 +2 +3 +5
Return 0 +3 +5 +6 +8
Table A� NC Correction for Length
Length, mm 600 1200 2400 3000 3600
Throw Correction 0.72 1 1.5 1.7 1.8
Table B� Correction Multiplier for Length
• Pressures are given in Pascal (Pa).
• Pressure loss data assumes a duct velocity is less than 4m/sec in the inlet duct.
• Isothermal throw values are given for terminal velocities of 0.8, 0.5 and 0.3m/sec respectively.
• Throw data is based on 1200mm active section. For a 600mm section the throw values are 0.72 times those shown. For a 3000mm continuous length, the throw values are 1.7 times those shown and 1.8 for 3600mm units
• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a
room absorption of 10dB, re 10-12 watts, for a 1200mm section. (See Table A for other lengths).
• For supply units used as a return, add 3 NC
• The tests were conducted with no Plenum effect for pressure or sound
• Throw values for High Throw units are based on a 1-way discharge from the slot
• Throws listed are for the 1-way air pattern. For divided airflow, select the airflow in each direction according to the number of slots aimed in that direction, with the total airflow apportioned between slot
13200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
25mm Slot Width
Length 600mm
Air Flow, l/s 12 24 35 47 59 71 83
Total Pressure, Pa 2 8 18 32 50 72 98
Static Pressure, Pa 2 7 16 28 44 63 86
NC (Noise Criteria) <10 <10 <10 20 28 35 40
Throw, m 0.3 - 0.5 - 1.8 1 - 1.8 - 3 1.8 - 2.8 - 3.8 2.5 - 3 - 4.3 2.8 - 3.3 - 5 3 - 3.8 - 5.5 3.3 - 4 - 5.8
Length 1200mm
Air Flow, l/s 19 38 57 76 94 113 132
Total Pressure, Pa 2 7 16 28 44 64 87
Static Pressure, Pa 1 4 10 18 28 40 55
NC (Noise Criteria) <10 <10 <10 16 24 31 37
Throw, m 0.3 - 0.5 - 1.8 1 - 1.8 - 4 1.8 - 3 - 5 2.8 - 4 - 5.5 3.3 - 4.3 - 6 4 - 5 - 6.8 4.3 - 5.3 - 7.3
Length 1500mm
Air Flow, l/s 24 47 71 94 118 142 165
Total Pressure, Pa 2 9 19 34 53 77 104
Static Pressure, Pa 1 4 10 18 28 40 55
NC (Noise Criteria) <10 <10 <10 18 26 33 38
Throw, m 0.3 - 0.5 - 2.3 1 - 2.3 - 4.3 2.3 - 3.3 - 5.5 3 - 4.3 - 6 3.8 - 5 - 7 4.3 - 5.5 - 7.5 5 - 5.8 - 8.3
FL-10 with 150mm inlet
38mm Slot Width
Length 600mm
Air Flow, l/s 19 33 47 61 76 90 104
Total Pressure, Pa 4 13 26 45 68 96 128
Static Pressure, Pa 4 11 22 38 57 81 109
NC (Noise Criteria) <10 <10 16 25 33 40 46
Throw, m 0.5 - 1.5 -2.8 1.5 - 2.5 - 3.8 2.5 - 3 - 4.3 2.8 - 3.8 - 5 3.3 - 4 - 5.5 3.3 - 4.3 - 6 3.8 - 4.5 - 6.5
Length 1200mm
Air Flow, l/s 38 57 76 94 113 132 151
Total Pressure, Pa 6 14 25 39 56 76 99
Static Pressure, Pa 4 8 14 22 32 44 57
NC (Noise Criteria) <10 <10 12 20 27 33 38
Throw, m 1 - 1.8 - 4 1.8 - 3 - 5 2.8 - 4 - 5.5 3.3 - 4.3 - 6 4 - 5 - 6.8 4.3 - 5.3 - 7.3 4.5 - 5.5 - 8
Length 1500mm
Air Flow, l/s 42 66 90 113 137 160 184
Total Pressure, Pa 6 15 28 44 64 88 116
Static Pressure, Pa 3 7 13 21 30 42 55
NC (Noise Criteria) <10 <10 12 20 27 33 39
Throw, m 1 - 1.8 - 4 1.8 - 3 - 5.3 2.8 - 4.3 - 6 3.3 - 5 - 6.8 4.3 - 5.3 - 7.3 4.5 - 5.8 - 8.3 5 - 6 - 8.5
FL-15 with 150mm inlet
51mm Slot Width
Length 600mm
Air Flow, l/s 24 40 57 73 90 106 123
Total Pressure, Pa 4 11 22 37 56 78 104
Static Pressure, Pa 4 10 20 34 51 71 95
NC (Noise Criteria) <10 <10 12 21 28 35 40
Throw, m 0.5 - 1.5 - 3 1.8 - 2.8 - 4 2.5 - 3.3 - 5 3 - 4 - 5.5 3.3 - 4.3 - 6 3.8 - 4.5 - 6.8 4 - 5 - 7
Length 1200mm
Air Flow, l/s 42 71 99 127 156 184 212
Total Pressure, Pa 4 11 21 35 52 73 97
Static Pressure, Pa 3 8 16 26 38 54 71
NC (Noise Criteria) <10 <10 20 29 36 42 48
Throw, m 1 - 1.8 - 4 2.3 - 3.3 - 5.5 3 - 4.5 - 6.5 4 - 5.3 - 7.3 4.5 - 5.5 - 8 5 - 6 - 8.5 5.5 - 6.8 - 9.5
Length 1500mm
Air Flow, l/s 47 78 109 139 170 201 231
Total Pressure, Pa 4 10 19 31 46 64 85
Static Pressure, Pa 2 6 12 20 29 41 54
NC (Noise Criteria) <10 <10 19 28 36 42 47
Throw, m 0.5 - 1.5 - 4 1.8 - 3 - 5.5 3 - 4.5 - 6.8 4 - 5.3 - 7.5 4.5 - 5.8 - 8.3 5.3 - 6.5 - 9.3 5.5 - 7 - 9.8
FL-20 with 200mm inlet
FlowBar with Swegon Plenum - High Throw (HT)
FLOWBAR
14Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
25mm Slot Width
Length 600mm
Air Flow, l/s 24 35 47 59 71 83 94
Total Pressure, Pa 7 16 29 46 66 90 117
Static Pressure, Pa 7 16 28 44 63 86 112
NC (Noise Criteria) <10 <10 19 27 34 40 44
Throw, m 1 - 1.8 - 3 1.8 - 2.8 - 3.8 2.5 - 3 - 4.3 2.8 - 3.3 - 5 3 - 3.8 - 5.5 3.3 - 4 - 5.8 3.8 - 4.3 - 6
Length 1200mm
Air Flow, l/s 33 52 71 90 109 127 146
Total Pressure, Pa 4 10 19 30 44 60 80
Static Pressure, Pa 3 8 16 25 37 51 67
NC (Noise Criteria) <10 <10 13 22 29 35 40
Throw, m 0.5 - 1.5 - 3.3 1.8 - 2.8 - 4.5 2.5 - 3.8 - 5.5 3 - 4.3 - 6 3.8 - 4.5 - 6.8 4.3 - 5.3 - 7.3 4.5 - 5.5 - 7.5
Length 1500mm
Air Flow, l/s 38 61 85 109 132 156 179
Total Pressure, Pa 4 10 19 30 45 63 83
Static Pressure, Pa 3 8 15 24 35 49 65
NC (Noise Criteria) <10 <10 13 22 29 35 40
Throw, m 0.5 - 1.5 - 3.8 1.8 - 2.8 - 5 2.8 - 4 - 5.8 3.3 - 4.5 - 6.8 4.3 - 5.3 - 7.3 4.5 - 5.5 - 8 5 - 6 - 8.5
FL-10 with 200mm inlet
38mm Slot Width
Length 600mm
Air Flow, l/s 19 33 47 61 76 90 104
Total Pressure, Pa 4 12 24 40 61 86 115
Static Pressure, Pa 4 11 22 38 57 81 109
NC (Noise Criteria) <10 <10 14 24 32 38 45
Throw, m 0.5 - 1.5 -2.8 1.5 - 2.5 - 3.8 2.5 - 3 - 4.3 2.8 - 3.8 - 5 3.3 - 4 - 5.5 3.3 - 4.3 - 6 3.8 - 4.5 - 6.5
Length 1200mm
Air Flow, l/s 38 61 85 109 132 156 179
Total Pressure, Pa 4 12 22 36 54 75 99
Static Pressure, Pa 4 9 18 30 44 61 81
NC (Noise Criteria) <10 <10 15 24 32 38 43
Throw, m 1 - 1.8 - 4 2.3 - 3 - 5 3 - 4.3 - 5.8 3.8 - 4.5 - 6.8 4.3 - 5.5 - 7.3 4.5 - 5.5 - 8 5 - 6 - 8.5
Length 1500mm
Air Flow, l/s 42 71 99 127 156 184 212
Total Pressure, Pa 4 11 21 35 53 74 99
Static Pressure, Pa 3 8 16 26 39 55 73
NC (Noise Criteria) <10 <10 14 24 31 37 43
Throw, m 1 - 1.8 - 4 2.3 - 3.3 - 5.5 3 - 4.5 - 6.5 4 - 5.3 - 7.3 4.5 - 5.5 - 8 5 - 6 - 8.5 5.5 - 6.8 - 9.5
FL-15 with 200mm inlet
51mm Slot Width
Length 600mm
Air Flow, l/s 24 42 61 80 99 118 137
Total Pressure, Pa 4 12 24 41 63 90 121
Static Pressure, Pa 4 11 24 41 62 88 119
NC (Noise Criteria) <10 <10 <10 13 20 27 32
Throw, m 0.5 - 1.5 - 3 1.8 - 2.8 - 4.3 2.8 - 3.8 - 5 3.3 - 4 - 5.8 3.8 - 4.5 - 6.5 4 - 5 - 7 4.3 - 5.3 - 7.3
Length 1200mm
Air Flow, l/s 42 78 113 149 184 219 255
Total Pressure, Pa 3 10 22 37 57 82 110
Static Pressure, Pa 3 10 20 35 54 76 103
NC (Noise Criteria) <10 <10 13 23 31 37 43
Throw, m 1 - 1.8 - 4 2.5 - 3.8 - 5.5 3.3 - 5 - 6.8 4.5 - 5.5 - 8 5 - 6 - 8.5 5.5 - 6.8 - 9.5 5.8 - 7.3 - 10
Length 1500mm
Air Flow, l/s 47 90 132 175 217 260 302
Total Pressure, Pa 3 9 20 34 53 76 103
Static Pressure, Pa 2 8 18 31 48 68 92
NC (Noise Criteria) <10 <10 15 25 33 39 45
Throw, m 0.5 - 1.5 - 4 2.5 - 3.8 - 6 3.8 -.5.3 - 7.3 5 - 6 - 8.5 5.5 - 6.8 - 9.5 5.8 - 7.3 - 10.3 6.5 - 8 - 11
FL-20 with 300mm inlet
FlowBar with Swegon Plenum - High Throw (HT)
15200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
63mm Slot Width
Length 600mm
Air Flow, l/s 47 68 90 111 132 153 175
Total Pressure, Pa 9 19 33 50 71 96 124
Static Pressure, Pa 9 18 31 47 67 90 117
NC (Noise Criteria) <10 <10 17 26 33 39 44
Throw, m 1.8 - 3 -4.3 2.8 - 3.8 - 5.3 3.3 - 4.3 - 6 4 - 5 - 6.8 4.3 - 5.3 - 7.3 4.5 - 5.5 - 8 5 - 6 - 8.5
Length 1200mm
Air Flow, l/s 66 104 142 179 217 255 293
Total Pressure, Pa 5 13 24 38 56 77 102
Static Pressure, Pa 4 10 19 31 45 62 82
NC (Noise Criteria) <10 <10 20 29 37 44 49
Throw, m 1.5 - 2.8 - 5.3 3 - 4.5 - 6.5 4.3 - 5.5 - 7.5 5 - 6 - 8.5 5.5 - 6.8 - 9.5 5.8 - 7.3 - 10 6.5 - 7.5 - 11
Length 1500mm
Air Flow, l/s 71 113 156 198 241 283 326
Total Pressure, Pa 4 11 21 33 49 68 90
Static Pressure, Pa 3 8 15 24 35 49 65
NC (Noise Criteria) <10 <10 18 28 36 43 49
Throw, m 1.3 - 2.8 - 5.5 3 - 4.5 - 6.8 4 - 5.5 - 8 5.3 - 6.5 - 8.8 5.8 - 7 - 9.8 6 - 7.5 - 10.8 6.8 - 8.3 - 11.5
76mm Slot Width
Length 600mm
Air Flow, l/s 59 80 101 123 144 165 186
Total Pressure, Pa 13 24 38 55 76 100 128
Static Pressure, Pa 12 22 35 52 71 94 119
NC (Noise Criteria) <10 <10 15 23 30 36 41
Throw, m 2.3 - 3.3 - 5 3 - 4 - 5.8 3.8 - 4.5 - 6.5 4 - 5 - 7 4.5 - 5.5 - 7.5 5 - 5.8 - 8.3 5.3 - 6 - 8.8
Length 1200mm
Air Flow, l/s 94 130 165 201 236 271 307
Total Pressure, Pa 10 18 30 44 61 81 103
Static Pressure, Pa 8 14 23 35 48 63 81
NC (Noise Criteria) <10 <10 17 25 32 39 44
Throw, m 2.5 - 4 - 6 3.8 - 5.3 - 7.3 4.5 - 5.8 - 8.3 5.3 - 6.5 - 9.3 5.8 - 7 - 9.8 6 - 7.3 - 10.3 6.5 - 8 - 11.3
Length 1500mm
Air Flow, l/s 104 146 189 231 274 316 359
Total Pressure, Pa 8 17 28 42 59 78 101
Static Pressure, Pa 6 12 20 29 41 55 71
NC (Noise Criteria) <10 <10 17 25 33 40 46
Throw, m 2.5 - 3.8 - 6.5 3.8 - 5.3 - 7.5 4.5 - 6 - 8.8 5.5 - 7 - 9.8 6 - 7.3 - 10.8 6.5 - 8 - 11.3 7 - 8.5 - 12.3
FL-25 with 250mm inlet
FL-30 with 250mm inlet
FlowBar with Swegon Plenum - High Throw (HT)
• Pressures are given in Pascal (Pa)
• Isothermal throw values are given for terminal velocities of 0.8, 0.5 and 0.3m/sec respectively
• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10dB, re 10-12 watts
• The tests were conducted with the FlowBar and plenums as a composite assembly
• Throw values for High Throw units are based on a 1-way discharge from the slot
• Throws listed are for the 1-way air pattern. For divided air flow, select the airflow in each direction according to the number of slots aimed in that direction, with the total airflow apportioned between slot
• Plenums not provided by Swegon may demonstrate performance variations from the published data and therefore Swegon would not be able to subsequently guarantee that performance matches our data
FLOWBAR
16Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
63mm Slot Width
Length 600mm
Air Flow, l/s 47 68 90 111 132 153 175
Total Pressure, Pa 9 18 32 48 69 93 120
Static Pressure, Pa 9 18 31 47 67 90 117
NC (Noise Criteria) <10 <10 12 21 28 34 40
Throw, m 1.8 - 3 -4.3 2.8 - 3.8 - 5.3 3.3 - 4.3 - 6 4 - 5 - 6.8 4.3 - 5.3 - 7.3 4.5 - 5.5 - 8 5 - 6 - 8.5
Length 1200mm
Air Flow, l/s 66 106 146 186 227 267 307
Total Pressure, Pa 5 12 23 37 55 76 101
Static Pressure, Pa 4 11 20 33 49 68 90
NC (Noise Criteria) <10 <10 16 26 34 41 46
Throw, m 1.5 - 2.8 - 5.3 3 - 4.5 - 6.8 4.3 - 5.5 - 7.5 5.3 - 6 - 8.8 5.5 - 6.8 - 9.8 6 - 7.3 - 10.3 6.5 - 8 - 11.3
Length 1500mm
Air Flow, l/s 71 118 165 212 260 307 354
Total Pressure, Pa 4 10 20 33 49 68 91
Static Pressure, Pa 3 9 17 28 41 58 77
NC (Noise Criteria) <10 <10 16 26 34 41 47
Throw, m 1.3 - 2.8 - 5.5 3 - 4.5 - 7 4.3 - 5.8 - 8.3 5.5 - 6.8 - 9.5 5.8 - 7.3 - 10.3 6.5 - 8 - 11.3 7 - 8.5 - 12
76mm Slot Width
Length 600mm
Air Flow, l/s 59 80 101 123 144 165 186
Total Pressure, Pa 12 23 37 53 74 97 123
Static Pressure, Pa 12 22 35 52 71 94 119
NC (Noise Criteria) <10 <10 11 19 26 32 37
Throw, m 2.3 - 3.3 - 5 3 - 4 - 5.8 3.8 - 4.5 - 6.5 4 - 5 - 7 4.5 - 5.5 - 7.5 5 - 5.8 - 8.3 5.3 - 6 - 8.8
Length 1200mm
Air Flow, l/s 94 137 179 222 264 307 349
Total Pressure, Pa 9 18 31 48 68 92 119
Static Pressure, Pa 8 16 28 42 60 81 105
NC (Noise Criteria) <10 <10 16 26 33 40 45
Throw, m 2.5 - 4 - 6 3.8 - 5.3 - 7.3 5 - 6 - 8.5 5.5 - 6.8 - 9.5 6 - 7.3 - 10.3 6.5 - 8 - 11.3 7 - 8.5 - 12
Length 1500mm
Air Flow, l/s 104 156 208 260 311 363 415
Total Pressure, Pa 7 16 29 45 64 88 114
Static Pressure, Pa 6 13 24 37 53 73 95
NC (Noise Criteria) <10 <10 17 26 34 41 47
Throw, m 2.5 - 3.8 - 6.5 3.8 - 5.5 - 8 5 - 6.5 - 9.3 5.8 - 7.3 - 10.3 6.5 - 8 - 11.3 7 - 8.5 - 12.3 7.5 - 9.3 - 13
FL-25 with 300mm inlet
FL-30 with 300mm inlet
FlowBar with Swegon Plenum - High Throw (HT)
• Pressures are given in Pascal (Pa)
• Isothermal throw values are given for terminal velocities of 0.8, 0.5 and 0.3m/sec respectively
• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10dB, re 10-12 watts
• The tests were conducted with the FlowBar and plenums as a composite assembly
• Throw values for High Throw units are based on a 1-way discharge from the slot
• Throws listed are for the 1-way air pattern. For divided air flow, select the airflow in each direction according to the number of slots aimed in that direction, with the total airflow apportioned between slot
• Plenums not provided by Swegon may demonstrate performance variations from the published data and therefore Swegon would not be able to subsequently guarantee that performance matches our data
17200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Continuous Slot Plenum Jet Throw (JT) Data based on active section 1200 long
25mm Slot Width
Air Flow, l/s-m 31 62 93 124 155 186 217
Static Pressure, Pa 2 7 15 27 42 61 83
NC (Noise Criteria) <10 <10 17 24 28 32 36
Throw, m 0.5 - 1 - 2.3 1.3 - 2.3 - 4 2.3 - 3 - 5.8 2.8 - 4 - 6.8 3.3 - 5.3 - 7.3 4 - 5.8 - 8 4.5 - 6 - 8.8
FL-10
38mm Slot Width
Air Flow, l/s-m 46 93 139 186 232 279 325
Static Pressure, Pa 2 8 18 31 49 70 95
NC (Noise Criteria) <10 <10 17 22 28 34 40
Throw, m 0.5 - 1.3 - 2.3 1.5 - 2.3 - 4.5 2.3 - 3.3 - 6.8 3 - 4.5 - 8 3.8 - 5.5 - 9.3 4.5 - 6.8 - 9.8 5.3 - 7.5 - 10.8
FL-15
51mm Slot Width
Air Flow, l/s-m 54 116 178 240 302 364 426
Static Pressure, Pa 1 7 15 28 44 64 88
NC (Noise Criteria) <10 <10 18 24 29 33 37
Throw, m 0.3 - 1 - 2.3 1.5 - 2.5 - 4.5 2.5 - 3.8 - 7 3 - 5.- 9.3 4 - 6 - 10.3 5 - 7.3 - 11.3 5.5 - 8.5 - 12.3
FL-20
63mm Slot Width
Air Flow, l/s-m 62 147 232 317 402 488 573
Static Pressure, Pa 1 7 17 31 51 74 102
NC (Noise Criteria) <10 <10 18 25 30 35 39
Throw, m 0.3 - 1 - 2.3 1.8 - 2.5 - 5.3 2.8 - 4 - 8 3.8 - 5.5 - 10.8 4.5 - 7 - 12 5.5 - 8.5 - 13 6.8 - 10 - 14
FL-25
76mm Slot Width
Air Flow, l/s-m 77 178 279 379 480 580 681
Static Pressure, Pa 1 7 17 31 50 73 100
NC (Noise Criteria) <10 <10 15 24 30 35 40
Throw, m 0.3 - 1 - 2.5 1.8 - 2.8 - 5.5 2.8 - 4.3 - 8.5 4 - 5.8 - 11.5 5 - 7.3 - 12.8 6 - 8.8 - 14.3 7 - 10.3 - 15.5
FL-30
Table B� Correction Multiplier for Length
Length, mm 600 1200 2400 3000 3600
Throw Correction 0.72 1 1.5 1.7 1.8
Table A� NC Correction for Length
Length, mm 600 1200 1800 2400 3000
Supply -3 0 +2 +3 +5
Return 0 +3 +5 +6 +8
• Pressures are given in Pascal (Pa)
• Pressure loss data assumes a duct velocity is less than 4m/sec in the inlet duct
• Isothermal throw values are given for terminal velocities of 0.8, 0.5 and 0.3m/sec respectively
• Throw data is based on 1200mm active section. For a 600mm section the throw values are 0.72 times those shown. For a 3000mm continuous length, the throw values are 1.7 times those shown and 1.8 for 3600mm units
• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10dB, re 10-12 watts, for a 1200mm section. See Table A for other lengths
• For supply units used as a return, add 3 NC
• The tests were conducted with no Plenum effect for pressure or sound
• Throw values for Jet Throw units are based on the pattern controller set at 0° discharge vertical flow
FLOWBAR
18Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
25mm Slot Width
Length 600mm
Air Flow, l/s 24 45 66 87 109 130 151
Total Pressure, Pa 3 11 23 41 63 90 121
Static Pressure, Pa 3 10 21 36 56 80 108
NC (Noise Criteria) <10 <10 16 23 29 34 39
Throw, m 0.5 - 1 - 1.8 1.3 - 1.8 - 3.3 1.5 - 2.5 - 4.3 2.3 - 3.3 - 5 2.8 - 4 - 5.5 3.3 - 4.3 - 6 3.8 - 4.5 - 6.8
Length 1200mm
Air Flow, l/s 47 83 118 153 189 224 260
Total Pressure, Pa 4 12 25 41 63 88 119
Static Pressure, Pa 3 8 17 28 42 60 80
NC (Noise Criteria) <10 <10 18 25 30 34 38
Throw, m 1 - 1.3 - 2.5 1.5 - 2.3 - 4.3 2.3 - 3 - 5.8 2.8 - 4 - 6.8 3.3 - 5.3 - 7.3 4 - 5.8 - 8 4.5 - 6 - 8.5
Length 1500mm
Air Flow, l/s 52 92 132 172 212 252 293
Total Pressure, Pa 4 11 23 40 60 85 114
Static Pressure, Pa 2 6 13 23 34 48 65
NC (Noise Criteria) <10 <10 17 24 29 33 37
Throw, m 1 - 1.3 - 2.5 1.5 - 2.3 - 4.3 2.3 - 3 - 6 2.8 - 4 - 7 3.3 - 5.3 - 8 4 - 6 - 8.5 4.5 - 6.5 - 9.3
38mm Slot Width
Length 600mm
Air Flow, l/s 28 52 76 99 123 146 170
Total Pressure, Pa 3 11 24 42 64 91 122
Static Pressure, Pa 2 7 14 24 37 52 70
NC (Noise Criteria) <10 <10 <10 16 24 31 37
Throw, m 0.3 - 1 -1.5 1 - 1.5 - 2.8 1.5 - 2.3 - 4.3 1.8 - 2.8 - 5.3 2.3 - 3.3 - 5.8 2.8 - 4 - 6.5 3 - 4.5 - 7
Length 1200mm
Air Flow, l/s 57 85 113 142 170 198 227
Total Pressure, Pa 8 17 31 48 70 95 124
Static Pressure, Pa 2 4 8 12 18 24 31
NC (Noise Criteria) <10 <10 <10 <10 16 22 27
Throw, m 0.5 - 1.3 - 2.3 1.3 - 1.5 - 3.3 1.5 - 2.3 - 4.5 1.8 - 2.8 - 5.5 2.3 - 3.3 - 6.8 2.5 - 4 - 7.5 3 - 4.5 - 8
Length 1500mm
Air Flow, l/s 66 94 123 151 179 208 236
Total Pressure, Pa 10 20 33 50 71 95 122
Static Pressure, Pa 2 3 6 9 13 17 22
NC (Noise Criteria) <10 <10 <10 <10 12 17 22
Throw, m 0.5 - 1.3 - 2.5 1.3 - 1.5 - 3.3 1.5 - 2.3 - 4.3 1.8 - 2.8 - 5.3 2.3 - 3 - 6.5 2.5 - 3.8 - 7.3 2.8 - 4.3 - 8.3
51mm Slot Width
Length 600mm
Air Flow, l/s 33 66 99 132 165 198 231
Total Pressure, Pa 2 8 18 33 51 74 100
Static Pressure, Pa 1 6 13 23 36 51 70
NC (Noise Criteria) <10 <10 14 21 27 33 38
Throw, m 0.3 - 0.5 - 1.5 1 - 1.5 - 3 1.5 - 2.3 - 4.5 2.3 - 3 - 6 2.5 - 3.8 - 7 3 - 4.5 - 7.5 3.8 - 5.3 - 8.3
Length 1200mm
Air Flow, l/s 66 113 160 208 255 302 349
Total Pressure, Pa 4 12 23 39 58 82 110
Static Pressure, Pa 1 4 8 14 21 30 40
NC (Noise Criteria) <10 12 21 27 32 36 40
Throw, m 0.3 - 1 - 2.3 1.3 - 1.8 - 3.8 1.8 - 2.8 - 5.3 2.3 - 3.3 - 6.8 2.8 - 4.3 - 8.3 3.3 - 5 - 9.3 3.8 - 5.8 - 10
Length 1500mm
Air Flow, l/s 71 123 175 227 278 330 382
Total Pressure, Pa 4 12 24 40 61 85 114
Static Pressure, Pa 1 3 6 11 16 23 30
NC (Noise Criteria) <10 13 21 27 32 36 40
Throw, m 0.3 - 1 - 2.3 1 - 1.8 - 3.8 1.8 - 2.5 - 5.3 2.3 - 3.3 - 6.8 2.8 - 4 - 8.3 3 - 5 - 9.5 3.8 - 5.5 - 10.3
FL-10 with 200mm inlet
FL-15 with 200mm inlet
FL-20 with 200mm inlet
FlowBar with Swegon Plenum - Jet Throw (JT)
19200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
25mm Slot Width
Length 600mm
Air Flow, l/s 24 45 66 87 109 130 151
Total Pressure, Pa 3 10 22 38 59 84 114
Static Pressure, Pa 3 10 21 36 56 80 108
NC (Noise Criteria) <10 <10 16 22 28 33 38
Throw, m 0.5 - 1 - 1.8 1.3 - 1.8 - 3.3 1.5 - 2.5 - 4.3 2.3 - 3.3 - 5 2.8 - 4 - 5.5 3.3 - 4.3 - 6 3.8 - 4.5 - 6.8
Length 1200mm
Air Flow, l/s 47 85 123 160 198 236 274
Total Pressure, Pa 3 10 21 37 56 79 107
Static Pressure, Pa 3 9 18 31 47 66 89
NC (Noise Criteria) <10 <10 18 25 30 35 39
Throw, m 1 - 1.3 - 2.5 1.5 - 2.3 - 4.5 2.3 - 3.3 - 5.8 2.8 - 4.3 - 6.8 3.8 - 5.3 - 7.5 4.3 - 5.8 - 8.3 5 - 6.5 - 8.8
Length 1500mm
Air Flow, l/s 52 99 146 193 241 288 335
Total Pressure, Pa 3 10 21 37 58 82 112
Static Pressure, Pa 2 7 16 28 44 63 85
NC (Noise Criteria) <10 <10 19 26 31 35 40
Throw, m 1 - 1.3 - 2.5 1.5 - 2.5 - 5 2.5 - 3.3 - 6.5 3 - 4.5 - 7.3 4 - 5.8 - 8.3 4.5 - 6.5 - 9.3 5.5 - 7 - 9.8
38mm Slot Width
Length 600mm
Air Flow, l/s 28 59 90 120 151 182 212
Total Pressure, Pa 2 9 20 37 58 84 115
Static Pressure, Pa 2 8 20 35 55 80 110
NC (Noise Criteria) <10 <10 <10 18 27 35 43
Throw, m 0.3 - 1 -1.5 1.3 - 1.5 - 3.3 1.5 - 2.5 - 5 2.3 - 3.3 - 5.8 2.8 - 4.3 - 6.8 3.3 - 5.3 - 7.3 4 - 5.5 - 8
Length 1200mm
Air Flow, l/s 57 113 170 227 283 340 396
Total Pressure, Pa 2 9 21 37 58 83 113
Static Pressure, Pa 2 8 18 31 49 70 95
NC (Noise Criteria) <10 <10 10 21 30 37 45
Throw, m 0.5 - 1.3 - 2.3 1.5 - 2.3 - 4.5 2.3 - 3.3 - 6.8 3 - 4.5 - 8 3.8 - 5.5 - 9.3 4.8 - 6.8 - 9.8 5.3 - 7.5 - 10.8
Length 1500mm
Air Flow, l/s 66 132 198 264 330 396 463
Total Pressure, Pa 2 9 20 35 55 79 107
Static Pressure, Pa 2 7 15 27 42 61 83
NC (Noise Criteria) <10 <10 10 21 29 36 43
Throw, m 0.5 - 1.3 - 2.5 1.5 - 2.5 - 4.5 2.5 - 3.3 - 7 3 - 4.5 - 8.8 4 - 5.8 - 9.8 4.5 - 7 - 10.8 5.5 - 8.3 - 11.5
51mm Slot Width
Length 600mm
Air Flow, l/s 33 76 118 160 203 245 288
Total Pressure, Pa 2 8 20 36 58 85 117
Static Pressure, Pa 1 7 8 34 54 79 108
NC (Noise Criteria) <10 <10 <10 17 25 31 36
Throw, m 0.3 - 0.5 - 1.5 1.3 - 1.8 - 3.3 1.8 - 2.8 - 5.5 2.5 - 3.8 - 6.8 3 - 4.5 - 7.5 3.8 - 5.5 - 8.3 4.3 - 6.5 - 9.3
Length 1200mm
Air Flow, l/s 66 137 208 278 349 420 491
Total Pressure, Pa 2 8 19 34 54 77 106
Static Pressure, Pa 1 6 14 25 40 58 79
NC (Noise Criteria) <10 <10 17 24 31 37 41
Throw, m 0.3 - 1 - 2.3 1.5 - 2.3 - 4.5 2.3 - 3.3 - 6.8 3 - 4.5 - 8.8 3.8 - 5.8 - 10 4.5 - 6.8 - 11 5.3 - 8 - 12
Length 1500mm
Air Flow, l/s 71 156 241 326 411 496 580
Total Pressure, Pa 2 8 19 34 54 79 108
Static Pressure, Pa 1 5 12 22 35 51 70
NC (Noise Criteria) <10 <10 19 26 32 38 43
Throw, m 0.3 - 1 - 2.3 1.5 - 2.3 - 4.5 2.5 -3.3 - 7 3 - 5 - 9.5 4 - 6 - 11 5 - 7.3 - 12 5.5 - 8.5 - 12.8
FL-10 with 250mm inlet
FL-15 with 300mm inlet
FL-20 with 300mm inlet
FlowBar with Swegon Plenum - Jet Throw (JT)
FLOWBAR
20Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
63mm Slot Width
Length 600mm
Air Flow, l/s 38 85 132 179 227 274 321
Total Pressure, Pa 2 8 19 35 55 81 111
Static Pressure, Pa 1 6 15 27 43 63 87
NC (Noise Criteria) <10 <10 <10 13 21 28 34
Throw, m 0.3 - 0.5 -1.5 1.3 - 1.8 - 3.3 1.8 - 2.8 - 5.3 2.5 - 3.8 - 7 3 - 4.5 - 8 3.8 - 5.5 - 8.8 4.3 - 6.5 - 9.5
Length 1200mm
Air Flow, l/s 71 142 212 283 354 425 496
Total Pressure, Pa 2 9 20 36 56 80 109
Static Pressure, Pa 1 4 9 17 26 38 52
NC (Noise Criteria) <10 <10 <10 17 24 30 36
Throw, m 0.3 - 0.5 - 2.3 1.3 - 2.3 - 4 2.3 - 3 - 6 2.8 - 4 - 8 3.3 - 5 - 10 4 - 6 - 11 4.5 - 7 - 12
Length 1500mm
Air Flow, l/s 76 156 236 316 396 477 557
Total Pressure, Pa 2 9 21 37 58 84 114
Static Pressure, Pa 1 3 7 13 21 31 42
NC (Noise Criteria) <10 <10 <10 16 24 30 36
Throw, m 0.3 - 0.5 - 1.8 1.3 - 1.8 - 4 2.3 - 3 - 6 2.8 - 4 - 8 3.3 - 5.3 - 10 4 - 6 - 11.5 4.5 - 7 - 12.5
76mm Slot Width
Length 600mm
Air Flow, l/s 47 101 156 210 264 319 373
Total Pressure, Pa 2 8 20 36 57 83 113
Static Pressure, Pa 1 6 14 26 41 59 81
NC (Noise Criteria) <10 <10 <10 <10 15 24 31
Throw, m 0.3 - 0.5 - 1.8 1.3 - 1.8 - 3.8 1.8 - 2.8 - 5.5 2.5 - 3.8 - 7.5 3 - 5 - 8.8 3.8 - 5.8 - 9.5 4.5 - 6.8 - 10.3
Length 1200mm
Air Flow, l/s 94 170 245 321 396 472 547
Total Pressure, Pa 3 11 23 39 60 85 114
Static Pressure, Pa 1 4 9 15 23 32 44
NC (Noise Criteria) <10 <10 <10 <10 13 21 27
Throw, m 0.3 - 1 - 2.5 1.3 - 2.3 - 4.3 2.3 - 3 - 6 2.8 - 4 - 8.3 3.3 - 5 - 10 4 - 6 - 11.5 4.5 - 7 - 12.5
Length 1500mm
Air Flow, l/s 113 193 274 354 434 514 595
Total Pressure, Pa 4 12 25 41 62 87 116
Static Pressure, Pa 1 3 7 12 18 25 33
NC (Noise Criteria) <10 <10 <10 <10 10 18 24
Throw, m 0.3 - 1 - 2.5 1.3 - 2.3 - 4.3 2.3 - 3 - 6 2.8 - 4 - 8 3.3 - 5 - 9.8 4 - 5.8 - 11.5 4.5 - 6.8 - 13
FL-25 with 250mm inlet
FL-30 with 250mm inlet
FlowBar with Swegon Plenum - Jet Throw (JT)
• Pressures are given in Pascal (Pa)
• Isothermal throw values are given for terminal velocities of 0.8, 0.5 and 0.3m/sec respectively
• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10dB, re 10-12 watts
• The tests were conducted with the FlowBar and plenums as a composite assembly
• Plenums not provided by Swegon may demonstrate performance variations from the published data and therefore Swegon would not be able to subsequently guarantee that performance matches our data
21200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
63mm Slot Width
Length 600mm
Air Flow, l/s 38 90 142 193 245 297 349
Total Pressure, Pa 1 8 19 36 57 84 116
Static Pressure, Pa 1 7 17 31 51 74 102
NC (Noise Criteria) <10 <10 <10 12 20 26 33
Throw, m 0.3 - 0.5 -1.5 1.3 - 1.8 - 3.8 1.8 - 2.8 - 5.8 2.8 - 4 - 7.3 3.3 - 5 - 8.3 4 - 6 - 9.3 4.5 - 7 - 10
Length 1200mm
Air Flow, l/s 71 158 245 333 420 507 595
Total Pressure, Pa 2 8 19 36 57 83 114
Static Pressure, Pa 1 5 13 23 37 54 74
NC (Noise Criteria) <10 <10 <10 18 26 32 38
Throw, m 0.3 - 0.5 - 2.3 1.5 - 2.3 - 4.5 2.5 - 3.3 - 7 3 - 5 - 9.5 4 - 6 - 11 5 - 7.3 - 12.3 5.5 - 8.5 - 13
Length 1500mm
Air Flow, l/s 76 175 274 373 472 571 670
Total Pressure, Pa 1 8 19 34 55 81 111
Static Pressure, Pa 1 4 10 19 30 44 60
NC (Noise Criteria) <10 <10 <10 18 26 32 38
Throw, m 0.3 - 0.5 - 1.8 1.5 - 2.3 - 4.5 2.5 - 3.3 - 7 3 - 5 - 9.5 4 - 6 - 11.5 5 - 7.3 - 12.8 5.8 - 8.5 - 13.8
76mm Slot Width
Length 600mm
Air Flow, l/s 47 106 165 224 283 342 401
Total Pressure, Pa 2 8 19 35 56 81 112
Static Pressure, Pa 1 7 16 29 47 68 94
NC (Noise Criteria) <10 <10 <10 <10 15 24 31
Throw, m 0.3 - 0.5 - 1.8 1.3 - 1.8 - 3.8 1.8 - 3 - 5.8 2.8 - 4 - 8 3.3 - 5.3 - 9.3 4 - 6 - 9.8 5 - 7.3 - 10.8
Length 1200mm
Air Flow, l/s 94 189 283 378 472 566 661
Total Pressure, Pa 2 9 21 37 58 83 113
Static Pressure, Pa 1 5 12 21 32 47 63
NC (Noise Criteria) <10 <10 <10 <10 17 25 32
Throw, m 0.3 - 1 - 2.5 1.5 - 2.5 - 5 2.5 - 3.8 - 7.3 3 - 5 - 9.5 4 - 6 - 11.5 5 - 7.3 - 12.8 5.5 - 8.3 - 13.8
Length 1500mm
Air Flow, l/s 113 217 321 425 529 632 736
Total Pressure, Pa 3 10 21 37 58 82 112
Static Pressure, Pa 1 4 10 17 26 37 50
NC (Noise Criteria) <10 <10 <10 <10 15 24 30
Throw, m 0.3 - 1 - 2.5 1.5 - 2.5 - 5 2.5 - 3.8 - 7.3 3.3 - 5 - 9.8 4 - 6 - 12 5 - 7 - 13.5 5.5 - 8.3 - 14.8
FL-25 with 300mm inlet
FL-30 with 300mm inlet
FlowBar with Swegon Plenum - Jet Throw (JT)
• Pressures are given in Pascal (Pa)
• Isothermal throw values are given for terminal velocities of 0.8, 0.5 and 0.3m/sec respectively
• Each NC value represents the noise criteria curve which will not be exceeded by the sound pressure in any of the octave bands, 2nd through 7th, with a room absorption of 10dB, re 10-12 watts
• The tests were conducted with the FlowBar and plenums as a composite assembly
• Plenums not provided by Swegon may demonstrate performance variations from the published data and therefore Swegon would not be able to subsequently guarantee that performance matches our data
FLOWBAR
22Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Standard Fixing Details
Dimensions FL-10-HT (25mm)
W = 70mm
Dimensions FL-10-HT (25mm)
W = 78mm
Flowbar Border 66Installation Detail
Dimensions FL-25-HT (63.5mm)
W = 146mm
Dimensions FL-25-HT (63mm)
W = 154mm
Dimensions FL-30-HT (76mm)
W = 171mm
Dimensions FL-30-HT (76mm)
W = 179mm
Dimensions FL-15-HT (38mm)
W = 95mm
Dimensions FL-15-HT (38mm)
W = 103mm
Dimensions FL-20-HT (51mm)
W = 121mm
Dimensions FL-20-HT (51mm)
W = 129mm
High Throw (HT) Details
Optional F6 Fixing (HT) Details
M gg
� 0
Dimensions FL-10-HT (25mm) W=78mm
Dimensions FL-15-HT (38mm) W= 103mm
Dimensions FL-20-HT (51 mm) W= 129mm
E E
0 0
+ � 0
1•1 ______ N_om_i _na _l _Le _n_g _th _____ _,
1•1Plenum Length
Dimensions FL-25-HT (63.5mm) W = 154mm
Dimensions FL-30-HT (76mm) W = 179mm
Flowbar Border 66 Install ation Detail
23200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Jet Throw (JT) Details
Dimensions FL-10-JT (25mm)
W = 78mm
Dimensions FL-25-JT (63mm)
W = 154mm
Flowbar Border 66Installation Detail
Dimensions FL-30-JT (76mm)
W = 179mm
Dimensions FL-20-JT (51mm)
W = 129mm
Dimensions FL-15-JT (38mm)
W = 103mm
Dimensions FL-10-JT (25mm)
W = 78mm
Dimensions FL-25-JT (63mm)
W = 154mm
Flowbar Border 66Installation Detail
Dimensions FL-30-JT (76mm)
W = 179mm
Dimensions FL-20-JT (51mm)
W = 129mm
Dimensions FL-15-JT (38mm)
W = 103mm
Jet Throw (JT) PBL-4 Installation Details
FLOWBAR
24Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Dimensions High Throw (HT) Dimensions
Type 66
Type 22
FL-10/15/20/25/30 - HT Border Type 66
F S W H
1 Slot (25mm) 35 25 70 43
1 Slot (38mm) 41 38 95 43
1 Slot (51mm) 48 51 121 43
1 Slot (63mm) 54 63 146 59
1 Slot (76mm) 60 76 171 59
FL-10/15/20/25/30 - HT Border Type 22
F S W H
1 Slot (25mm) 41 25 70 43
1 Slot (38mm) 48 38 95 43
1 Slot (51mm) 54 51 121 43
1 Slot (63mm) 54 63 146 61
1 Slot (76mm) 60 76 171 61
Type 11
Type 55
FL-10/15/20/25/30 - HT Border Type 11
F S W H
1 Slot (25mm) 22 25 70 43
1 Slot (38mm) 28.5 38 95 43
1 Slot (51mm) 35 51 121 43
1 Slot (63mm) 41 63 146 58.5
1 Slot (76mm) 47.5 76 171 58.5
FL-10/15/20/25/30 - HT Border Type 55
F S W H
1 Slot (25mm) 14 25 70 61.5
1 Slot (38mm) 21 38 95 61.5
1 Slot (51mm) 27 51 121 61.5
1 Slot (63mm) 31 63 146 61.5
1 Slot (76mm) 38 76 171 61.5
25200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Jet Throw (JT) Dimensions
FL-10/15/20/25/30 - JT Border Type 66
F S W H O
1 Slot (25mm) 35 25 70 43 76
1 Slot (38mm) 41 38 95 43 102
1 Slot (51mm) 48 51 121 43 127
1 Slot (63mm) 54 63 146 59 152
1 Slot (76mm) 60 76 171 59 178
FL-10/15/20/25/30 - JT Border Type 22
F S W H
1 Slot (25mm) 41 25 70 43
1 Slot (38mm) 48 38 95 43
1 Slot (51mm) 54 51 121 43
1 Slot (63mm) 54 63 146 61
1 Slot (76mm) 60 76 171 61
Border Type 66 Slot Run
H
Type 66 FL-10/15/20/25/30 Type 22 FL-10/15/20/25/30
Slot Run Dimensions
Border Type 22 Slot Run
Border Type 11/22/55 Slot Run with end plates
FLOWBAR
26Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
End Border Configurations
Border Type 66
Optional Blanking Plates - FBBO Blank-off
Optional Return Light Shield Painted Black
FBBO - 10 (25mm Slot) FBBO - 15 (38mm Slot) FBBO - 20 (51mm Slot) FBBO - 25 (63mm Slot) FBBO - 30 (76mm Slot)
FBR - 10 (25mm Slot) FBR - 15 (38mm Slot) FBR - 20 (51mm Slot) FBR - 25 (63mm Slot) FBR - 30 (76mm Slot)
Border Type 11, 22 & 55
27200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Standard Installation Details
UHC Upper Hanger ClipThe upper hanger clip is used to suspend the FlowBar assembly from the structure. The clip is designed to utilize standard ceiling hanger wire. UHC is for 1 slot only and FL-10, 15 and 20.
H2 Hard Ceiling ClipThe H2 hard ceiling clip is used to mount the FlowBar assembly with border type 55 when 25mm thick plasterboard ceiling is required.
H3 Hard Ceiling ClipThe H3 hard ceiling clip can be used to mount the FlowBar assembly with border type 22 when a standard plasterboard ceiling is required.
Spline Support ClipThe SS1 spline clip is also used to adjoin multiple sections of FlowBar when continuous lengths are desired.
Installation Details - High Throw (HT) and Jet Throw (JT)
FLOWBAR
28Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Standard Types 22 Plaster Frame Instal-lation
Standard Installation for Suspended Ceiling Systems
Standard Installation for Solid (Plaster-board) Type Ceiling Systems
Standard Plenum Box Installation System (HT Only)
29200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Diffuser Installation with plenum
FlowBar Model Ceiling Opening dimensions for border type 66
1-Slot
FL - 10 76
FL - 15 102
FL - 20 127
FL - 25 152
FL - 30 178
Ceiling
Di�user Flange
Mounting Bracket
Attach Hanger Wire/Rods to Plenum Support Brackets Ceiling
Hemmed Edge of Plenum
Mounting bracket catches in HemmedEdge of Plenum
Di�user �ange overlaps ceiling opening
Opening
Plenum
Concealed Fastening Plenum Installation Diffuser Installation with PlenumAttach Hanger Wire/Rods to Plenum Support Brackets Ceiling
Hemmed Edge of Plenum
Mounting bracket catches in HemmedEdge of Plenum
Di�user �ange overlaps ceiling opening
Opening
Plenum
Concealed Fastening Plenum Installation Diffuser Installation with Plenum
Diffuser Installation without plenum
Concealed Fastening Plenum Instal-lation
Installation Details - Jet Throw (JT) only
Bracket Diffuser Assembly
FLOWBAR
30Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Ordering KeyDiffuser ordering keyFlowBar
FlowBar a b c d e f g h i
Frame:
- 11 Flangeless
- 22 Plaster frame
- 55 Plaster frame (deep)
- 66 Surface Mounting
Diffuser Model
- HT High Throw
- JT Jet Throw
Number of slots: - 1
Slot Width (mm)
- 10
- 15
- 20
- 25
- 30
End Flanges
- ME0 Open End
- ME1 End border one end
- ME2 End border two ends
- EP1 End plate one end
- EP2 End Plate two ends
Plenum Fix
- F6 ‘U’ Bracket fixing
- F9 Toggle Fix
Diffuser Fix
- SP Special Fixing
- H2 Hard Ceiling clip (25mm)
- H3 Hard Ceiling clip (12.5mm)
- UHC Upper hanger clip (Border Type 66)
Frame Finish
- 3 Standard White matt. Type 66 border
- 4 Standard Black Type 22, 55 & 11 Border
- 6 Other colours available to special order
Blade Finish
- 4 Standard Black
- 6 Other colours available to special order
Example: FlowBar - 66 - HT -1 - 15 - E1 - F6 - 3 - 4
31200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Plenum BoxesSupplied with 6mm lining as standard with side entry spigot. Plenum boxes can be supplied without lining or with 12mm lining as an option. Apply to sales office for price.
SpecificationsMaterial/FinishStandard is a minimum of 0.7mm thick galvanised steel.
ConstructionPlenum boxes are generally fabricated in 3 sections, which are either mechanically joined or spot welded to form an airtight seal. As standard, spigots are side entry and located centrally. All boxes are supplied with stepped edges. F9 (HT) or hemmed edges F6 (JT) as standard.
Installation OptionsFixing lugs can be factory fitted if preferred or special fixing methods (by others) may be used. For plenum boxes having flush ends separate hanging brackets/fixing lugs need to be fitted to allow independent support of diffuser and plenum box.
Accessories• Joggled style plenum boxes or pan adapters
• Spigot dampers include manual quadrant or cord operated
• Options for: Unlined; 6mm or 12mm thick Class ‘O’ internal lining
• Equalising grids (50% free area perforated mesh)
• Fixing lugs or special fixings (by others)
High Throw (HT) Plenum
Jet Throw (JT) Plenum
FLOWBAR
32Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Pressure Drops & Sound RatingThe pressure drop given is for supply diffuser with damper fully open. When the diffuser is installed with plenum box, the pressure loss of the box has to be added to the diffuser.
Plenum Box Spigot Volumes (l/s)
Spigot Velocity m/s
1.5 2.0 2.5 3.0 3.5 4.0
Pressure Drop Pa* 2 4 6 8 12 16
Sound Power Level NR* - - 25 30 35 40
*The figures given are approximate - dependent upon spigot entry conditions.
Spigot Velocity m/s
Diameter (mm) 1.5 2.0 2.5 3.0 3.5 4.0
100 10 15 19 22 26 30
125 18 24 30 35 41 47
150 25 34 42 51 60 68
175 35 46 58 70 82 94
200 45 60 75 91 109 121
225 58 77 96 117 137 151
250 71 95 120 142 170 191
275 86 115 145 172 205 230
300 103 139 172 208 240 275
325 120 160 200 240 280 320
350 140 188 235 280 328 375
400 185 245 310 370 430 495
33200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Type PBL-1
Angle Bracket fixing available if required.Optional rectangular or flat oval spigots* available (minimum height 100mm).
Type PBL-1 for F6 fixing
Plenum Box Dimensions
:,:
I I I
65
---� / )
Cord operated spigot damper
65 � I I
:,:
. '-'I w
*
0 N
IS> 0
0 N
IS> 0
X
L + 18mm
X
L + 18mm
:,:
I I I
65
---� / )
Cord operated spigot damper
65 � I I
:,:
. '-'I w
*
0 N
IS> 0
0 N
IS> 0
X
L + 18mm
X
L + 18mm
Order Details
C
H L W D LH RH X
- - - - - - -
Order Details
C
H L W D LH RH X
- - - - - - -
L+18
FLOWBAR
34Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Plenum AccessoriesManual Quadrant Control Damper
Model Ref Nominal Duct Diameter* Open Blade Protrusion (mm) DW144 Casing Leakage Class Weight (Kg)
CB 100 – C 0.56
CB 125 – C 0.71
CB 150 – C 0.85
CB 160 C 0.91
CB 200 C 1.17
CB 250 20.5 C 1.53
CB 300 45.5 C 1.92
CB 315 53 C 2.05
CB 350 70.5 C 2.35
CB 355 73 C 2.40
* NDD: Nominal duct diameter. Actual sizes are in accordance with BS EN 1506.
200
5050
75
50
50
60
ND
D
Type PBL-4 for F6 fixing
Order Details
H L W Wo D (spigot) Ko Q
- - - - - - -
35200930 - LNNN00394 (1.5) Swegon reserves the right to alter specifications.
FLOWBAR
Type PBL-1
Plenum Box Detail Lever Operated Damper Option
6565
FLOWBAR
36Swegon reserves the right to alter specifications. 200930 - LNNN00394 (1.5)
Plenum ordering keyPlenum
Plenum a b c d e
Model:
- PBL-1 Linear Plenum Box with either a circular or square side entry spigot
- PBL-2 Linear Plenum Box having either a circular or square top entry spigot
- PBL-3 Linear Plenum Box with joggle section having ei ther a circular or square side entry spigot
- PBL-4 Linear Plenum Box with joggle section having either a circular or square top entry spigot
Internal Lining:
- U Unlined
- L 6mm class 'O' lining
Spigot Damper: - N Plain spigot no damper
- Q Quadrant damper
- Z Lever operated opposed blade damper
- C Cord operated damper fitted to spigot
Options (mm)
- 0 No options
- 2 Equalising grid
- 3 Fixing lugs fitted to side of plenum
- 4 Profile ends on each end of plenum
- 5 Hemmed Edge for concealed strap fixing
- 6 Plenum retaining clips (HT Only
Dimensions:
- See dimension guide below
Plenum (PBL-1, PBL-2 dimension key)See page 33 for plenum dimensioning drawings
Circular Spigot
Plenum (all dimensions in mm) a b c
Neck Size (L x W)
Plenum Height (H)
Circular Spigot Diameter
Square Spigot
Plenum (all dimensions in mm) a b c d
Neck Size (L x W)
Plenum Height
Sq/Rect Spigot Width x Height (A x B)
Centre line of spigot (X)