air mtr catalog 8-05 - interfluid srl - pneumatica, … · · 2016-06-30oilless versions, which...

2

Worldwide Excellence in Air Technology –Dedicated to the Success of Your Pneumatic Applications

Air Motors/GearmotorsKnown industry wide for their rugged construction and reliability, Gast AirMotors and air powered Gearmotors are used in a variety of applications.

Lubricated Air Motors come in seven basic models up to 9.5 HP (7,1 kW);motor speeds are variable from 300 to 10,000 RPM. Oilless versions, which requireabsolutely no lubrication, come in three basic models ranging from .18 to 2.5 HP(0,13 to 1,86 kW) and with motor speeds up to 4,000 RPM. Choose from hub, foot,face, NEMA C-Flange or Metric D Series interface mountings and clockwise,counterclockwise or reversible rotations. Four and eight vane models are alsoavailable.

Air powered Gearmotors are available in rightangle and in-line modelsoffering a maximum torque range of 73 to 5,200 lb. in. (8 to 587 Nm) and gearratios from 10:1 to 60:1 single reduction gear reducers. A full line of recommendedaccessories is also available.

•Minimum maintenance.You can put a Gast Air Motor in places wherethey will not get much service, because there’svirtually nothing to service on a Gast Air Motor,providing it is operated on a clean, dry, and lu-bricated air supply*.

•Will not burn out.Gast Air Motors can be stalled or overloadedfor long periods without damage.

•Low price.Cost is less than other motors of equal horse-power and capabilities.

•Operate in all positions.Mount them sideways, upside-down, or inany position so long as adequate lubrication*is provided and end thrust is kept to designlimits. Gearmotors will operate in almost anyposition, see model data.

•Low-shock starts.Because Gast Air Motors go to workwith air-cushioned smoothness, theycut stress on your equipment.

•Self-sealing vanes.Vanes are self-sealing and automatically takeup their own wear, thus ensuring constant out-put for thousands of hours of use.

•Mounting flexibility.Foot, hub, face, NEMA-C or metric flangemotor mountings are standard equipment formost air motor sizes.

•Four-vane or eight-vane.Four-vane units meet most requirements,but for more precise inching control andminimum blowby in applications where mo-tor is operating in a stalled condition,specify eight-vane models.

•Long-life accessories.To ensure long life, Gast offers accessoriesdesigned to extend unit life including air fil-ters that remove water and particles downto 5 microns, and air line lubricators thatsupply a constant flow of lubrication auto-matically*. We can supply a pressure regu-lator that provides precise control of powerand operating speed. Options like thesehelp you get smooth performance withminimum maintenance.

*Non-lubricated series does not require alubricator

• Variable speed.You can vary air motor speed between 300and 10,000 rpm (depending on modelselection) with a simple valve put inbetween the air source and air motor.

•Nonelectrical sparking.As a nonelectrical device, the possibility ofexplosion from igniting flammable gases isgreatly reduced.

•Instantly reversible.A four-way valve in the air line enablesa Gast Air Motor to be instantly reversed. Aturn of the valve causes a completereversal of rotation, even when the motor isrunning at full speed.

•Cool running.As the air motor turns, expanded air coolsthe motor. Units can be used in ambienttemperatures up to 250°F (120°C) in annonhazardous atmosphere.

•Compact and portable.Get maximum horsepower with minimumsize and weight.

Why you should look into a Gast Air Motor

GAST MFG INC • PO BOX 97 • BENTON HARBOR, MI 49023-0097 • PH 269/926-6171 • FAX 269/925-8288 • www.gastmfg.com ®Registered Trademark/™Trademark of Gast Manufacturing Inc. Copyright © Gast Manufacturing Inc. All rights reserved.

Pictorial and dimensional data is subject to change without notice.

The information presented in this catalog is based on technical data and test results of nominal units. It is believed to be accurate and is offered asan aid in the selection of Gast products. It is the user’s responsibility to determine suitability of the product for intended use and the user as-sumes all risk and liability whatsoever in connection therewith.

3

Typical Applications• Mixing Equipment• Conveyor Drives• Pump Drives• Food Packaging• Pharmaceutical Packaging• Hoists and Winches• Hose Reels• Fiberglass Choppers• Tension Devices• Turntables

The chart below shows general performance ranges of ourlubricated Air Motors. See if we have the right offering for yourapplication.

How to select an air motor.Air motors differ in many ways from other powersources. These unique operating character-istics must be considered when selecting anair motor for a particular job. It is easy tochange horsepower and speed of an airmotor by throttling the air inlet. Therefore,the best rule of thumb for selecting an airmotor is to choose one that will provide thehorsepower and torque needed using onlytwo-thirds (2/3) of the line pressure available.The full air line pressure will then be available foroverloads and starting.

• Output Power vs Speed.The output power of an air motor is relative to speed andto air line pressure.

• Torque vs Speed.1. An air motor slows down when load increases…

at the same time its torque increases to a point whereit matches the load. It will continue to provide increasedtorque all the way to the stalled condition, and it canmaintain the stalled condition without any harm to the mo-tor.

2. As the load is reduced, an air motor will increase speedand the torque will decrease to match the reduced load.

3. When the load on an air motor is either increased ordecreased, speed can be controlled by increasing ordecreasing air pressure.

4. Starting torque of an air motor is lower than runningtorque. While this provides smooth, low-shock starting,it is necessary to have additional air line pressure forstarting under heavy loads.

• Air Consumption vs Speed.Air consumption increases as speed and air pressure is in-creased.

Use of Air Motors in Hazardous AtmospheresMost of the Gast air motors and some of the gearmotors in thiscatalog meet the requirements of the EC directive 94/9EC(ATEX 100a). They may be used in zones 1 and 2 whereexplosive atmospheres of gas or dust are likely to occur. Theseare marked with II 2 G D c T4 in the catalogue and on theproduct. This indicates the air motor is Group II, Category 2,Gas and Dust Atmospheres, and a maximum surface tempera-ture of 275OF/ 135OC Check that the product driven by the airmotor meets ATEX directive.

There are several points regarding the safety of air motors. Ourair motors are not a source of electric sparks. However, it ispossible that an article which is not part of the air motor (e.g.,wrenches, hammers, etc.) could create a spark by sharplyimpacting a cast iron or aluminum case or the steel shaft of theair motor. [Note that electric motor enclosures for both class 1and II hazardous locations can be made of “...iron, steel,copper, bronze, or aluminum...” (UL 674, Electric Motors andGenerators - Hazardous Locations, June 23, 1989; paragraph4.2, page 6)].

Gast air motors are designed to be operated by compressed air, theexpansion of which creates a cooling effect. As a result, the outsidesurface temperature of the air motor will not reach ignition tempera-ture. A maximum surface temperature of 275OF/135OC Operation ofthe air motor with compressed air purges a flammable mixture fromthe inside of the air motor. To prevent static electricity frombeing an ignition source electrically ground the metal airmotor.

We do not guarantee the safety of any application, but to ensurethe safe operation of an air motor in your application, always followthe product operation manual, follow ATEX 100a when operating ina hazardous atmosphere and consult with a qualified engineer.

4

GEARMOTORS

Performance Overview

AIR MOTORS

Get the right air motor with all the right options.

*Oilless models

OPERATING DATA

MAX. MAX OUTPUT TORQUE AT MAX. AIR MAX. MAX

GEARSPEED

LINEPOWER MAX OUTPUT CONSUMPTION SPEED TORQUE

MODEL RATIO rpm PRES. hp kW lb. in. Nm cfm m3/h rpm lb. in. Nm Page No.

1AM-NRV 15:1 350 A 0.34 0,26 62 7,1 21.0 36 30 72 8,1 21

1UP-NRV 15:1 400 C 0.32 0,23 49 5,5 21.0 36 30 71 8,0 21

4AM-RV 10:1 300 B 1.26 0,94 274 31,0 57.5 98 30 425 48,0 22

4AM-RV 15:1 200 B 1.25 0,90 400 45,2 60.0 102 20 640 72,0 22

4AM-70C 20:1 150 A 1.17 0,87 487 55,0 71.0 120 15 740 83,6 23

4AM-70C 40:1 75 A 0.95 0,71 800 90,4 71.0 120 7 1255 141,8 24

4AM-70C 60:1 50 A 0.82 0,61 1040 117,5 71.0 120 5 1640 185,3 25

6AM-22A 10:1 300 A 3.40 2,54 720 81,4 130.0 221 30 950 107,4 26

6AM-22A 20:1 150 A 2.65 1,98 1100 124,3 130.0 221 15 1550 175,6 27

6AM-22A 40:1 75 A 2.10 1,57 1725 194,9 135.0 230 8 2500 282,5 28

8AM-32A 20:1 125 A 3.70 2,76 1850 209,1 177.0 301 15 2550 288,2 29

16AM-13 20:1 100 A 6.50 4,85 4175 471,8 275.0 468 15 5175 584,8 30

A – 100 psig and 7,0 bar line pressure for imperial and metric data, respectively.B – 80 psig and 5,5 bar line pressure for imperial and metric data, respectively.C – 60 psig and 4,1 bar line pressure for imperial and metric data, respectively.

OPERATING DATA

MAX. MAX OUTPUT TORQUE AT MAX. AIR MAX. MAXSPEED POWER MAX OUTPUT CONSUMPTION SPEED TORQUE

MODEL rpm hp kW lb. in. Nm cfm m3/h rpm lb. in. Nm Page No.

1AM (A) 10,000 0.45 0,33 2.75 0,31 20.5 35,1 650 5.60 0,65 5

1UP (B) 6,000 0.45 0,33 5.25 0,58 27 47 500 6.00 0,68 5

2AM (A) 3,000 0.93 0,68 19.50 2,20 30 49,5 350 26.10 3,05 6-7

4AM (A) 3,000 1.70 1,30 36.00 4,1 78 132,5 300 56.00 6,3 8-9

6AM (A) 3,000 4.00 3,00 84.00 10,00 128 228 300 115.00 13,00 10-11

8AM (A) 2,500 5.25 3,90 132.00 14,40 175 293 300 185.00 21,00 12-13

16AM (A) 2,000 9.50 7,00 290.00 34,00 275 475 300 372.00 43,00 14

*NL22(B) 4,000 .18 0,13 2.80 0,32 18.5 31 1000 4.30 0,49 16

*NL32(B) 2,000 .42 0,31 13.50 1,5 30 51 300 21.00 2,5 17

*NL42(B) 2,000 .82 0,61 25.50 2,90 41 70 500 44.00 5,0 18

*NL52(B) 2,000 2.50 1.86 78.75 8,90 68 115 500 100.00 11,3 19

Whatever your rotary air motor power requirements, chances are we have what you’re looking for.

5

MODEL

1AM-NCC-12(4 Vanes, CCW Rotation)

1AM-NCW-14(4 Vanes, CW Rotation)

1AM-NRV-39A(4 Vanes, Reversible)


Net wt. 2 lbs. (0,9 kg)

FEATURES• Hub mounting• Any plane operation• Muffler AF350

• II, 2 GD c T4

RECOMMENDED• Filter AH100F• Regulator AH101R• Gauge AA806• Lubricator AH102L• Oil AD220 –

1 quart (.94 liters)• Repair kit K200

(Single Rotation)• Repair kit K201 (Reversible)• Repair kit K278 (8 Vane, Reversible)

OPTIONAL• Foot mounting- see page 34

1UP-NCC-1A(4 Vanes, CCW Rotation)

1UP-NCW-2A(4 Vanes, CW Rotation)

1UP-NRV-3A(4 Vanes, Reversible)

1UP-NRV-10(8 Vanes, Reversible)


FEATURES• Hub mounting• Any plane operation• Muffler AF350

• II, 2 GD c T4

RECOMMENDED• Filter AH100F• Regulator AH101R• Gauge AA807• Lubricator AH102L• Oil AD220 –

1 quart (.94 liters)• Repair kit K285

(Single Rotation)• Repair kit K286 (Reversible)• Repair kit K298 (8 Vane, Reversible)

OPTIONAL• Foot mounting-see page 34

.5

.4

.3

.2

.1

0

SPEED – RPM (OUTPUT)0 2000 4000 6000 8000 10000

HORS

EPOW

ER

0,4

0,3

0,2

0,1

0

SPEED – RPM (OUTPUT)0 2000 4000 6000 8000 10000

KILO

WAT

T

Output Power vs. Speed

100 psi

40 psi

20 psi

60 psi

80 psi

1,4 bar

2,8 bar

7,0 bar

5,6 bar

4,2 bar

7

6

5

4

3

2

1

0

SPEED – RPM (OUTPUT)0 2000 4000 6000 8000 10000

TORQ

UE L

B. IN

.

0,7

0,6

0,5

0,4

0,3

0,2

0,1

0

SPEED – RPM (OUTPUT)0 2000 4000 6000 8000 10000

TORQ

UE ( N

m)

Torque vs. Speed

100 psi

40 psi20 psi

60 psi80 psi

7,0 bar

2,8 bar1,4 bar

4,2 bar

5,6 bar

25

20

15

10

5

0

SPEED – RPM (OUTPUT)0

CFM

(FRE

E AI

R) C

ONS

UMPT

ION 10

8

6

4

2

0

SPEED – RPM (OUTPUT)0

FREE

AIR

CO

NSUM

PTIO

N (l/

s)

36

30

24

18

12

6

0

FREE AIR CONSUM

PTION (m

3/h)

Air Consumption vs. Speed

100 psi

40 psi

20 psi

60 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

80 psi

7,0 bar

2000 4000 6000 8000 10000 2000 4000 6000 8000 10000

.5

.4

.3

.2

.1

0

SPEED – RPM (OUTPUT)0 1000 2000 3000 4000 5000 6000

HORS

EPOW

ER

0,4

0,3

0,2

0,1

0

SPEED – RPM (OUTPUT)0 1000 2000 3000 4000 5000 6000

KILO

WAT

T


40 psi

20 psi

60 psi

80 psi

1,4 bar

2,8 bar

5,6 bar

4,2 bar

7

6

5

4

3

2

1

0

SPEED – RPM (OUTPUT)0 1000 2000 3000 4000 5000 6000

TORQ

UE L

B. IN

.

0,7

0,6

0,5

0,4

0,3

0,2

0,1

0

SPEED – RPM (OUTPUT)0 1000 2000 3000 4000 5000 6000

TORQ

UE ( N

m)

Torque vs. Speed

40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

Air Motors up to 1/2 hp, speeds from 500 to 10,000 rpm, max. pressure 100 psi (7 bar)

0.375DIA.9,53

1.25031,75

0.8120,6

1.1429,0

2x0.256,4

4.66118,4

2.7269,1

0.5413,7

0.33 FLAT 8,4 2x 45°

2.2256,4

1.0526,7

1/8 NPT PIPE

2.4462,01.7544,5

30

25

20

15

10

5

0

SPEED – RPM (OUTPUT)0 1000 2000 3000 4000 5000 6000

CFM

(FRE

E AI

R) C

ONS

UMPT

ION 15,0

12,5

10,0

7,5

5,0

2,5

0

SPEED – RPM (OUTPUT)0 1000 2000 3000 4000 5000 6000

FREE

AIR

CO

NSUM

PTIO

N ( l/

s)

544842363024181260

FREE AIR CONSUM

PTION (m

3/h)


40 psi

20 psi

60 psi

2,8 bar

1,4 bar

4,2 bar

80 psi 5,6 bar

inches / mm

inches / mm

0.375DIA.9,53

1.25031,75

1.1429,0

2x0.256,4

4.25108,0

2.5064,0

0.5413,7

1/8 NPT PIPE

2x 45°

2.2256,4

1.0526,7

2.4462,01.7544,5

6


MODEL

2AM-FCC-1(4 Vanes, CCW Rotation)

2AM-FCW-13(4 Vanes, CW Rotation)


FEATURES• Foot mounting• Any plane operation• Metal muffler AC980 adds 2" height

when installed

• II 2 GD c T4

RECOMMENDED• Filter AH103F• Regulator AH104R• Gauge AA806• Lubricator AH105L• Oil AD220 – 1 quart (.94 litres)• Repair kit K202 (Single Rotation)

2AM-NCC-16(4 Vanes, CCW Rotation)

2AM-NCW-7B(4 Vanes, CW Rotation)

2AM-NRV-89(4 Vanes, Reversible)


FEATURES• Hub mounting• Any plane operation• Metal muffler AC980 adds 2" height

when installed

• II 2 GD c T4

RECOMMENDED• Filter AH103F• Regulator AH104R• Gauge AA806• Lubricator AH105L• Oil AD220 – 1 quart (.94 litres)• Repair kit K202 (Single Rotation)• Repair kit K509 (Reversible)

2AM-NCC-43A(4 Vanes, CCW Rotation)

2AM-NRV-90(4 Vanes, Reversible)


FEATURES• NEMA 56C mounting• Any plane operation• Metal muffler AC980 adds 2" height

when installed

• II 2 GD c T4

1.2531,8

1/4 PIPE INLET

1/4 PIPE EXHAUST

5.88149,4

45°6.50165,1

1.4135,8

2.0652,3

1.6341,40.123,0

0.38 -16 THD.9,65 (4HLS.)

0.19 SQ. KEY4,83

5.87149,1

0.625 DIA.15,880.70417,88

4.50 DIA.114,3

1.750DIA.44,45

4.94125,5

2.8171,4

1.2531,8

1/4 PIPE1.1328,7

1.0025,4

4.06103,1

2.5063,5

0.500 DIA.12,70.4511,4

0.6316,0

1.7845,2

DIA. (4) HLS

1.0025,4

0.4511,4

1.50 38,1

4.94125,52.81

71,4

3.5088,9

3.7595,3

3.0076,2

1/4 PIPE

0.389,7

5.28134,1

0.287,1

0.9423,9

4.13104,9

1/4 PIPE2.7569,8

0.50 DIA.12,7

inches / mm

inches / mm

inches / mm

RECOMMENDED• Filter AH103F• Regulator AH104R• Gauge AA806• Lubricator AH105L• Oil AD220 – 1 quart (.94 litres)• Repair kit K203A (Single Rotation) • Repair kit K510 (Reversible)

7

Metric Models

Delivers up to 0,56 kW ( 3/4 hp). Speeds maybe varied from 300 to 3,000 rpm. Max.recommended operating pressure 7 bar(100 psi).

Models 2AM-ACC-88/2AM-ARV-92

Models 2AM-ACC-91/2AM-ARV-93

2.8171,41.18

30,01.2531,8 1/4 BSP1/4 BSP

0.164,1

ø0.39 THRU (4) ON 5.12 DIA. B.C.10,0 130,0

M5 X 0.59 DEEP15,0

2.5063,5

ø 4.33110,0

45° TYPø 0.5512 14,0

0.143,6

5.00127,0

5 mm KEY

ø 6.30160,0

1.7845,2

MODEL

2AM-ACC-88(4 Vanes, CCW Rotation)Flange Mount

2AM-ACC-91(4 Vanes, CCW Rotation)Face Mount

2AM-ARV-92(4 Vanes, Reversible)Flange Mount

2AM-ARV-93(4 Vanes, Reversible)Face Mount

FEATURES• IEC #72 mounting frame size:

D71 (2AM-ACC-88, 2AM-ARV-92)D71C (2AM-ACC-91, 2AM-ARV-93)

• Any plane operation• Metal muffler AC980 adds 2" height

when installed

• II 2 GD c T4

RECOMMENDED• Repair kit K203A (Single Rotation)• Repair kit K510 (Reversible)

1.0

0.8

0.6

0.4

0.2

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

HORS

EPOW

ER

0,7

0,6

0,5

0,4

0,3

0,2

0,1

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

KILO

WAT

T


40 psi

20 psi

60 psi

80 psi

100 psi

1,4 bar

2,8 bar

4,2 bar

5,6 bar

7,0 bar

30

25

20

15

10

5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

TORQ

UE L

B. IN

.

3,5

3,0

2,5

2,0

1,5

1,0

0,5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

TORQ

UE (N

m)

Torque vs. Speed

100 psi

40 psi

20 psi

60 psi

80 psi

7,0 bar

2,8 bar

1,4 bar

4,2 bar

5,6 bar

30

25

20

15

10

5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

CFM

(FRE

E AI

R) C

ONS

UMPT

ION 15,0

12,5

10,0

7,5

5,0

2,5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

FREE

AIR

CO

NSUM

PTIO

N ( l/

s)

544842363024181260

FREE AIR CONSUM

PTION (m

3/h)


40 psi

20 psi

60 psi

2,8 bar

1,4 bar

4,2 bar

80 psi5,6 bar

100 psi7,0 bar

ø0.55150.551114,00813,998ø

2.75782.754270,04869,957

2.5063,5

45∞ TYP

0.102,5

5.00127,0

5 mm KEY

ø 4.13104,9

1.7845,2

2.8171,41.18

30,01.2531,8

1/4 BSP1/4 BSP

0.43 DEEP (4) ON ø 3.346 B.C.11,0 85,0

M5 X 0.59 DEEP15,0

M6 TAP X

inches / mm

8


MODEL

4AM-FRV-24(4 Vanes, Dual Shaft)

4AM-FRV-13C(4 Vanes, Reversible)

4AM-FRV-63A(8 Vanes, Reversible)


FEATURES• Foot mounting• Any plane operation• Single or dual shaft• Metal muffler AC980 adds 2" height

when installed.

• II 2 GD c T4

RECOMMENDED• Filter AH103F• Regulator AH104R• Gauge AA806• Lubricator AH105L• Oil AD220 – 1 quart (.94 litres)• Repair kit K205 (4 Vane, Reversible)• Repair kit K279 (8 Vane, Reversible)

4AM-NRV-22B(4 Vanes, Reversible)



FEATURES• Face mounting• Any plane operation• Metal muffler AC980 adds 2" height

when installed.

• II 2 GD c T4

RECOMMENDED• Filter AH103F• Regulator AH104R• Gauge AA806• Lubricator AH105L• Oil AD220 – 1 quart (.94 litres)• Repair kit K205 (4 Vane, Reversible)• Repair kit K279 (8 Vane, Reversible)

4AM-NRV-50C(4 Vanes, Reversible)

4AM-NRV-70C(8 Vanes, Reversible)


FEATURES• NEMA 56C mounting• Any plane operation• Metal muffler AC980 adds 2" height

when installed

• II, 2 GD c T4

RECOMMENDED• Filter AH103F• Regulator AH104R• Gauge AA806

1.2531,8

1.2531,8

5.81147,6

3.2582,61/4 PIPE

0.50 DIA.12,7

1.1228,4

0.9423,91.50

38,1

2.7870,60.38

9,7

3.5088,9

3.7595,3

1.5038,1

1.5038,10.28 HOLE (4)7,1

5.32135,1

1/4 PIPE

5.04128,0

1.2531,8

5.81147,6

3.2582,6

1.1228,4

3.94100,1

1.7243,7

1/4 PIPE

0.25 -20 THD.6,35

1.750DIA.44,45

0.5012,7

2.5063,5

15°

1.25 R31,80.31 DP HOLE (3)7,9

0.500 DIA.12,70.55514,1

0.6316,0

#3 WKW

0.164,1

1/4 PIPE INLET1/4 PIPE EXHAUST

6.50165,1

0.38 -16 THD.9,65 (4HLS.)

4.50 DIA.114,3

2.0652,3

45∞0.625 DIA.15,88

0.70417,88

1.2531,8

0.133,3

2.0652,3

6.69169,9

1.4135,80.19 SQ. KEY4,83

5.88149,4

inches / mm

inches / mm

inches / mm

9

Metric Models

MODEL

4AM-ARV-119(4 Vanes, Reversible)

4AM-ARV-120(8 Vanes, Reversible)

FEATURES• IEC #72 mounting frame size D71• Any plane operation • Metal muffler AC980 adds 2" height

when installed. (Includes 3/8 BSPadaptor with air motor).

• II 2 GD c T4

RECOMMENDED• Repair kit K206C (4AM-ARV-119)• Repair kit K208B (4AM-ARV-120)

Delivers up to 1,5 kW (2 hp). Speeds may be variedfrom 300 to 3,000 rpm. Max. recommendedoperating pressure 7 bar (100 psi).

3.2582,61.18

30,01.2531,8 3/8 BSP3/8 BSP

0.164,1

ø0.39 THRU (4) ON 5.12 DIA. B.C.10,0 130,0

M5 X 0.59 DEEP15,0

2.5063,5

ø 4.33110,0

45° TYPø 0.5512 14,0

0.143,6

5.88149,4

5 mm KEY

ø 6.30160,0

1.7845,2

Note: Performance datarepresents a 4-vane modelwith no exhaust restriction.

1.81.61.41.21.00.80.60.40.2

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

HORS

EPOW

ER

1,4

1,2

1,0

0,8

0,6

0,4

0,2

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

KILO

WAT

T


40 psi

20 psi

60 psi

80 psi

100 psi

1,4 bar

2,8 bar

4,2 bar

5,6 bar

7,0 bar

70

60

50

40

30

20

10

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

TORQ

UE L

B. IN

.

7

6

5

4

3

2

1

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

TORQ

UE (N

m)

Torque vs. Speed

100 psi

20 psi

7,0 bar

2,8 bar

1,4 bar

4,2 bar

5,6 bar

40 psi

60 psi80 psi

80

70

60

50

40

30

20

10

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

CFM

(FRE

E AI

R) C

ONS

UMPT

ION 40

35

30

25

20

15

10

5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

FREE

AIR

CO

NSUM

PTIO

N ( l/

s)

144

120

96

72

48

24

0

FREE AIR CONSUM

PTION (m

3/h)


100 psi

40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar

inches / mm

10

Air Motors up to 4 hp, speeds from 300 to 3,000 rpm, max. pressure 100 psi (7 bar)

MODEL

6AM-FRV-5A (4 Vanes, Reversible)



FEATURES• Foot mounting• Any plane operation• Metal muffler AC990 adds 2" height when installed

• II 2 GD c T4

RECOMMENDED• Filter AH106F• Regulator AH107R• Gauge AA806• Lubricator AH108L• Oil AD220 – 1 quart (.94 litres)• Repair kit K208 (4 Vane)• Repair kit K281 (8 Vane)

6AM-NRV-7A (4 Vanes, Reversible)


FEATURES• Face mounting• Any plane operation• Muffler AC990 adds 2" height

when installed

• II 2 GD c T4

RECOMMENDED• Filter AH106F• Regulator AH107R• Gauge AA806• Lubricator AH108L• Oil AD220 – 1 quart (.94 litres)• Repair kit K208




FEATURES• NEMA 56C mounting• Any plane operation• Muffler AC990 adds 2" height

when installed

• II 2 GD c T4

RECOMMENDED• Filter AH106F• Regulator AH107R• Gauge AA806• Lubricator AH108L• Oil AD220 – 1 quart (.94 litres)• Repair kit K208 (4 Vane)• Repair kit K281 (8 Vane)

0.34 DIA. (4) HLS.8,6

4.38111,3

2.3860,5

5.00127,0

0.625 DIA.15,880.70417,88

7.47189,7

1.3935,30.19 SQ. KEY4,83

1/2 NPT PIPE2.7569,9

3.5088,9

4.25108,0

5.81147,6

2.5063,5

1.7444,2

0.31 -18 THD. 0.44 DP (3)7,87 11,1

5.00127,0

2.25 DIA.57,2

2.4462,0

30°

0.625 DIA.15,880.70417,88

1.9449,3

8.29210,6

1.3935,30.19 SQ. KEY4,83

1/2 NPT PIPE2.7569,9

2.3158,7

2.00 R50,8

1/2 NPT PIPE

0.38 -16 THD.9,65 (4 HLS.)

6.50165,1

4.50 DIA.114,3

3.1379,5

45°

0.625 DIA.15,880.70417,88

0.133,3

2.0652,3

8.29210,6

1.4135,80.19 SQ. KEY4,83

5.88149,4

2.7569,9

inches / mm

inches / mm

inches / mm

11

Metric Models

MODEL

6AM-ARV-54(4 Vanes, Reversible)Repair kit K281A

6AM-ARV-55(8 Vanes, Reversible)Repair kit K281B

FEATURES• IEC #72 mounting frame

size D80• Any plane operation• Metal muffler AC990 adds 2"

height when installed

• II 2 GD c T4

Delivers up to 3 kW (4 hp). Speeds may be variedfrom 300 to 3,000 rpm. Max. recommendedoperating pressure 7 bar (100 psi).

4.41112,01.57

39,81.3835,1 1/2 BSP1/2 BSP

0.19 ECC.4,8

ø0.47 THRU (4) ON 6.50 DIA. B.C.11,9 165,1

M6 X 0.59 DEEP15,0

2.7569,9

ø 5.12130,0

45° TYPø 0.7480 19,0

0.143,6

7.50190,5

6 mm KEY

ø 7.87199,9

2.4461,9

140

120

100

80

60

40

20

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

CFM

(FRE

E AI

R) C

ONS

UMPT

ION

60

50

40

30

20

10

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

FREE

AIR

CO

NSUM

PTIO

N ( l/

s)

240216192168144120967248240

FREE AIR CONSUM

PTION (m

3/h)


100 psi

40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar

120

100

80

60

40

20

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

TORQ

UE L

B. IN

.

14

12

10

8

6

4

2

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

TORQ

UE ( N

m)

100 psi

Torque vs. Speed

40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar

4

3

2

1

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

HORS

EPOW

ER

3,0

2,5

2,0

1,5

1,0

0,5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500 3000

KILO

WAT

T


40 psi

20 psi

60 psi

80 psi

100 psi

1,4 bar

2,8 bar

4,2 bar

5,6 bar

7,0 bar

Note: Performance datarepresents a 4-vane modelwith no exhaust restriction.

inches / mm

12


MODEL

8AM-FRV-2B (4 Vanes, Reversible)



FEATURES• Foot mounting• Any plane operation• Metal muffler AC990 adds 2" height when installed

• II 2 GD c T4

RECOMMENDED• Filter AH106F• Regulator AH107R• Gauge AA806• Lubricator AH108L• Muffler AG600 – above 1,000 rpm• Oil AD220 – 1 quart (.94 litres)• Repair kit K210 (4 Vane)• Repair kit K283 (8 Vane)

8AM-NRV-5B (4 Vanes, Reversible)



FEATURES• Face mounting• Any plane operation• Metal muffler AC990 adds 2"

height when installed

• II 2 GD c T4





FEATURES• NEMA 145TC mounting• Any plane operation• Metal muffler AC990 adds 2" height when installed

• II 2 GD c T4


5.50139,7

0.750 DIA.19,05

8.41113,6

1.5338,90.19 SQ. KEY4,83

2.7569,9

3.5088,9

4.50114,3

2.0050,8

4.91124,7

3.9199,3

0.34 DIA. (4) HLS.8,6

1.3434,0

0.389,7

1/2 NPT PIPE

0.19 SQ. KEY4,82

1/2 NPT PIPE2.7569,9

45°

8.48215,4

0.7519,05

1.3434,0

5.50139,7

DIA.

3.00 DIA.76,2

0.38 -16 THD. 0.19 DP (4) HOLES9,7 4,81.94 R49,3

0.369,1

1.5338,9

2.0953,1

4.91124,7

1.3835,1

2.5364,3

1/2 NPT PIPE

6.50165,1

0.38 -16 THD.9,65 (4 HLS.)

4.50 DIA.114,3

3.8497,5

45°

0.875 DIA.22,23

0.133,3

2.1354,1

9.50241,3

0.19 SQ. KEY4,83

5.88 BOLT149,4 CIRCLE

2.7569,9

1.3835,1

inches / mm

inches / mm

inches / mm

13

MODEL

8AM-ARV-70(4 Vanes, Reversible)Repair kit K282A

8AM-ARV-71(8 Vanes, Reversible)Repair kit K282B

FEATURES• IEC #72 mounting frame

size D90• Any plane operation• Metal muffler AC990 adds 2" height when installed

• II 2 GD c T4

Metric Models

180160140120100806040200

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500

TORQ

UE L

B. IN

.

25

20

15

10

5

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500

TORQ

UE ( N

m)

100 psi

Torque vs. Speed

40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar

180160140120100806040200

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500

CFM

(FRE

E AI

R) C

ONS

UMPT

ION 80

70

60

50

40

30

20

10

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500

FREE

AIR

CO

NSUM

PTIO

N ( l/

s)

300288264240216192168144120967248240

FREE AIR CONSUM

PTION (m

3/h)


40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar

100 psi

6

5

4

3

2

1

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500

HORS

EPOW

ER

4

3

2

1

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000 2500

KILO

WAT

T


40 psi

20 psi

60 psi

80 psi

100 psi

1,4 bar

2,8 bar

4,2 bar

5,6 bar

7,0 bar

Note: Performance data representsa 4-vane model with no exhaustrestriction.

5.70144,81.97

50,01.3835,1 1/2 BSP1/2 BSP

2.4662,5

0.225,6

0.47 THRU (4) ON 6.50 DIA. B.C.11,9 165,1

M8 X 1.25 0.79 DEEP20,1

ø

2.7569,9

ø 5.12130,0

45° TYPø 0.9449 24,0

0.143,6

9.30236,2

8 mm KEY

ø 7.87199,9

Delivers up to 3,7 kW (5 hp). Speeds may bevaried from 300 to 2,500 rpm. Max. recommendedoperating pressure 7 bar (100 psi).

inches / mm

14

MODEL

16AM-FCC-1(6 Vanes, CCW Rotation)

16AM-FRV-2(6 Vanes, Reversible)

16AM-FCW-28(6 Vanes, CW Rotation)

Net wt. 72 lbs. (32,4 kg) and73 lbs. (32,9 kg) respectively.

FEATURES• Foot, face mounting• Any plane operation

• II 2 GD c T4

RECOMMENDED• Filter AH109F• Regulator AH110R• Gauge AA806• Lubricator AH111L• Muffler AG601• Oil AD220 –

1 quart (.94 litres)• Repair kit K212

(Single Rotation)• Repair kit K213

(Reversible)

16AM-FRV-13(6 Vanes, Reversible)


FEATURES• NEMA 143 & 145TC mounting• Any plane operation

• II 2 GD c T4

RECOMMENDED• Filter AH109F• Regulator AH110R• Gauge AA806• Lubricator AH111L• Muffler AG601• Oil AD220 – 1 quart (.94 litres)• Repair kit K213


280

240

200

160

120

80

40

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000

CFM

(FRE

E AI

R) C

ONS

UMPT

ION 140

120

100

80

60

40

20

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000

FREE

AIR

CO

NSUM

PTIO

N ( l/

s) 48043238433628824019214496480

FREE AIR CONSUM

PTION (m

3/h)


40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar100 psi

400

350

300

250

200

150

100

50

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000

TORQ

UE L

B. IN

.

50

40

30

20

10

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000

TORQ

UE ( N

m)

100 psi

Torque vs. Speed

40 psi

20 psi

60 psi

80 psi

2,8 bar

1,4 bar

4,2 bar

5,6 bar

7,0 bar

10

8

6

4

2

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000

HORS

EPOW

ER

7

6

5

4

3

2

1

0

SPEED – RPM (OUTPUT)0 500 1000 1500 2000

KILO

WAT

T


40 psi

20 psi

60 psi

80 psi

100 psi

1,4 bar

2,8 bar

4,2 bar

5,6 bar

7,0 bar

0.03 X 45°0,76 CHAM.

8.00203,2

5.88149,4

45°TYP

0.87450.8750DIA.22,2122,23

2.1354,1

13.65 MAX.346,7

0.19 SQ. KEY4,822.1253,8

7.28184,9

5.88 BOLT149,3 CIRCLE

1.4135,8

0.133,3

6.62168,1

4.4974.500114,2114,3

0.41 HOLE (4)10,4

4.24107,7 1-1/4 NPT PIPE

2.7569,96.75

171,5

3.3885,8

4.00101,6

0.38 -16 UNC-2B TAP THRU (4) HOLES9,7

0.44 -14 UNC-2B X 0.62 DP (4)11,1 15,7

8.00203,2

4.38111,3

45°

1.125 DIA.28,57

4.06103,1

14.06357,1

2.5665,00.25 SQ. KEY6,35

2.1253,8

7.34186,4

2.44 R62,0

2.0050,8

1.5639,6

8.44214,4

5.62142,7

7.06179,3

4.00101,6

3.87598,4

5.78146,8

0.41 HOLE (4)10,4

0.7519,1

3.6291,9

B

C

A

2.7569,9

3.3885,8

3.3885,8

Rotation A B C

Single direction 1 PIPE NONE 11/4 PIPE

Reversible 11/4 PIPE 11/4 PIPE NONE

inches / mm

inches / mm

air mtr catalog 8-05 - interfluid srl - pneumatica, … · · 2016-06-30oilless versions, which...

Documents