aircraft wing
TRANSCRIPT
![Page 1: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/1.jpg)
AIRCRAFT WINGPRESENTED BY:
Shweta(13/618)
Vishal Vyas(13/620)
INTRODUCTION TO AERONAUTICS LAB
UCE RTU KOTA
![Page 2: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/2.jpg)
Topics:Introduction
Historical Background
Definition of Wing
How lift is generated
Wing constructional introduction
Internal structure of wing
Wing Construction & Mathematics
Types of Wing
Stability devices on wing
Development of wing from 1900-2015
Unconventional designs
![Page 3: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/3.jpg)
INTRODUCTION
![Page 4: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/4.jpg)
HISTORICAL BACKGROUND The Ancient Chinese :Kites with curved surfaces flew better than kites
with flat surfaces.
Leonardo da Vinci, 1486-1490:
The idea of strapping a pair of wings to arms fail out of
favor & replaced by the concept of wing flapped up & down.
![Page 5: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/5.jpg)
Lilienthal and Cayley:
In the 1800s, demonstrated that a curved surface produces more lift than a flat surface
Wilbur and Orville Wright:Construction of fixed wing aircraft and use of
ailerons. Material used is Spurce. Discovery of wind tunnels.
![Page 6: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/6.jpg)
What is Wing?
“A wing is a type of fin with a surface that produces aerodynamic force for flight or propulsion through the atmosphere, or through another gaseous or liquid fluid. As such, wings have an airfoil shape, a streamlined cross-sectional shape producing lift”.
![Page 7: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/7.jpg)
How Lift is Generated ?
The basic principle behind an lift is described by Bernoulli's theorem.
“Air that travels over the top surface of the airfoil has to travel faster and thus gains dynamic pressure. The subsequent loss of static pressure creates a pressure difference between the upper and lower surfaces that is called lift and opposes the weight of an aircraft (or thrust that opposes drag)”.
As the angle of attack (the angle between the chord line and relative air flow) is increased, more lift is created. Once the critical angle of attack is reached (generally around 14 degrees) the airfoil will stall.
![Page 8: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/8.jpg)
![Page 9: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/9.jpg)
WING CONSTRUCTIONAL INTRODUCTION
Wing construction is similar in most modern aircraft. In its simplest form, the wing is a framework made up of spars and ribs and covered with metal. The construction of an aircraft wing is shown in figure.
![Page 10: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/10.jpg)
Internal Structure of Wing
![Page 11: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/11.jpg)
Internal Structure of Wing(Contd.)
Ribs: The parts of a wing which support the covering and provide the airfoil shape.
Spar: Running span wise at right angles (or thereabouts depending on wing sweep) to the fuselage.
Stringers: A strip of wood or metal to which the skin of an aircraft is fastened
![Page 12: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/12.jpg)
![Page 13: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/13.jpg)
Internal Structure of Wing(Contd.)
Skin: The outer surface of the wing. Originally made of fabric, modern aircraft use aluminum or composite materials due to their lightweight and rust-resistant properties.
Fuel Tank: Commonly located in the wing, fuel can either be housed in its own tank or allowed to fill the cavities between the ribs.
Flaps: Are a “high lift / high drag” device. Not only do they improve the lifting ability of the wing at slower speeds by changing the camber, or curvature of the wing, they also create more drag, meaning an aircraft can descend, or lose altitude faster, without gaining airspeed in the process.
![Page 14: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/14.jpg)
Internal Structure of Wing(Contd.)
Root: The wing root is the portion of the wing that attaches to the fuselage, or body of the aircraft.
Wing Tip: The wing tip is furthest from the fuselage and is typically where the navigation lights are mounted (a red light on the left, a green light on the right).
Slats: Another “high lift” device typically found on swept or delta wing aircraft. Slats are similar to the flaps except they are mounted on the leading edge of the wing. They also assist in changing the camber to improve lifting ability at slower speeds.
![Page 15: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/15.jpg)
![Page 16: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/16.jpg)
Aspect Ratio: The ratio of the wing’s length to its chord line.
Camber: The name given to the curvature of the upper or lower surfaces of the wing.
Chord Line: The theoretical line running from the leading edge of the wing to the trailing edge.
Leading Edge: The front edge of an aircraft’s wing. Trailing Edge: The rear edge of an aircraft’s wing.
Wing Construction & Mathematics
![Page 17: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/17.jpg)
![Page 18: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/18.jpg)
Types of Wings?
Number
PositionStructure
On the Basis of:
![Page 19: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/19.jpg)
Based on Position
![Page 20: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/20.jpg)
Based on Structure
![Page 21: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/21.jpg)
![Page 22: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/22.jpg)
Aileron: Ailerons increase or decrease lift asymmetrically, in order to change roll and, thus, move the aircraft left or right while flying. Ailerons are hinged sections fitted at the rear of each wing
Stability Devices on Wings
![Page 23: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/23.jpg)
Stability Devices on Wings(Contd.)Flaps:
Flaps are devices used to alter the lift characteristics of a wing and are mounted on the trailing edges of the wings of a fixed-wing aircraft to reduce the speed at which the aircraft can be safely flown and to increase the angle of descent for landing. They shorten take off and landing distances. Flaps do this by lowering the stall speed and increasing the drag.
![Page 24: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/24.jpg)
![Page 25: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/25.jpg)
Airfoil
Leading Edge = Forward edge of the aerofoil
Trailing Edge = Aft edge of the aerofoil Chord = Line connecting the leading and
trailing edge. Denotes the length of the aerofoil
Mean Camber Line = Line drawn half way between the upper and lower surface of the aerofoil. Denotes the amount of curvature of the wing
Point of Maximum Thickness
= Thickest part of the wing
expressed as a percentage of the chord
Airfoil: It is the shape of a wing or blade (of a propeller, rotor, or turbine) or sail as seen in cross-section.
![Page 26: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/26.jpg)
![Page 27: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/27.jpg)
Development of wings from 1900-2015
![Page 28: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/28.jpg)
![Page 29: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/29.jpg)
SOME UNCONVENTI0NAL
DESIGNSDrawbacks of Conventional Wings:
A. Higher control power required.
B. Incurring extra drag and fuel consumption increases.
C. At high angles of attack stall problems occurred.
D. Flap deployment causes nose down pitching moments which must be overcome by elevator and/or horizontal tail deflection causing the overall maximum lift to go down.
![Page 30: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/30.jpg)
Features of some unconventional designs
The canard (forward lifting surface)
is lifting.
Weight savings since the horizontal tail is eliminated.
Savings in drag which will result in better speed and range characteristics (lower fuel consumption).
![Page 31: Aircraft Wing](https://reader033.vdocument.in/reader033/viewer/2022050818/55cf9964bb61eb8e0d8b47a9/html5/thumbnails/31.jpg)
Thank You