airlo & theraflow mattresses - range overview

Alternating Air Mattress Range‘Breakthrough Pressure Relief Technology’

™Theraflow

20+Very High Risk

15+Very High Risk

10+At Risk

Existing PressureArea/s?

TreatmentSolutions

PreventionSolutions

Patient Weight180+

TheraflowBariatric

Airlo5Overlay

Airlo3Overlay

AirLo8Mattress Replacementwith Heel Suspension

Theraflow

Patient Weight180+

<10Low Risk

Yes

Yes

Yes

Yes

Yes

No

Foot Ulcer Only

Patient can self assistfor transfers etc ...

Patient needs permanentincline for respiration

Diabetic or Labile Blood Flow

Focussed ReperfusionTreatment

No

No

NoYes

Yes

Yes

No

No

No

No

Patient Weight>100kg

Mattress Selection Guide

MATTRESS SPECSDimensions (mm)(W x H x D)

2000 x 900 x 100 2000 x 900 x 130 2000 x 900 x 210 2000 x 900 x 250 2000 x 1070 x 250 2000 x 1070 x 250

No. of Cells 22 18 20 28 28 28

Static Head Cells

3 3 3 4 4 4

Side Bolster Cells

- - - - 2 Aside 2 Aside

Cell Material

TPU TPU TPU TPU, Nylon TPU TPU, High Density, Multi-zoned

Cell Cycle 1 in 2 1 in 2 1 in 2 Paired 1 in 2 Paired 1 in 2 Paired 1 in 2

Alternating Mode

14 minutes per cycle






Positioning Handles

- - 2 aside 2 aside 2 aside 2 aside

Warranty 12 months 12 months 12 months 12 months 12 months 12 months

CONTROL UNIT SPECSDimensions (mm)(W x H x D)

270 x 210 x 100 270 x 210 x 100 270 x 210 x 100 250 x 250 x 170 250 x 250 x 170 250 x 250 x 170

Weight 2.5 kg 2.5 kg 2.5 kg 3 kg 3 kg 3 kg

Power Rating

240V 50Hz 12VA 240V 50Hz 12VA 240V 50Hz 12VA 240V 50Hz 12VA 240V 50Hz 12VA 240V 50Hz 12VA

Air Flow 10 L/min 10 L/min 10 L/min 20 L/min 20 L/min 20 L/min

Static/Transport Mode

Timeout - 60 mins Timeout - 60 mins Timeout - 60 mins Timeout - 60 mins Timeout - 60 mins Timeout - 60 mins

Care Mode - Timeout - 20 mins Timeout - 20 mins Timeout - 20 mins Timeout - 20 mins Timeout - 20 mins

Incline Mode - w/ Auto Tilt Sensor

w/ Auto Tilt Sensor

- - -

Warranty 24 months 24 months 24 months 24 months 24 months 24 months

COVER SPECSTop Cover Plastibert 2 way

stretch - WeldedPlastibert 2 way stretch - Welded

Plastibert 2 way stretch - Welded

Dartex - Welded Dartex - Welded Sioen Multi Stretch - Welded

Base/s Nylon TPU - Welded

Nylon TPU - Welded

Nylon TPU - Welded Assorted PU & PVCs - Welded

Assorted PU & PVCs - Welded

Assorted PU & PVCs - Welded

Air-Lo 3 Air-Lo 5 Air-Lo 8 TheraflowStandard

TheraflowKing Single

TheraflowBariatric

Mattress Specifications

PTM636640PTM636629 PTM636630 PTM636635 PTM636645 PTM636646

For years, the Australian market has had to make do with older generation active pressure care technology at the more affordable end of the market. Now finally, the Air-Lo line of support systems makes available the latest in alternating technology and quality previously only seen in higher end systems. The information below represents a summary of the main quality differences that make ALL the difference in Therapy, Infection Control and Comfort.

Feature Advantage

Machine welded thermal polyurethane cells

Strong construction provides support wit stretch properties for comfort and care

Two way stretch European top cover

Better stretch properties result in improved pressure release and comfort

Hi flow computer controlled air distributor

Gives instant response to user input and longer deflation periods. Larger release valve ensures faster deflation.

Latest generation therapy program Results in more pressure release through the alternation cycle with less inflation time

The Therapy Difference

Feature Advantage

Machine welded top cover and base

No stitching or tape that can break down or allow moisture wicking into the cell section.

European PU top cover 95° machine wash and tumble dry for disinfection

A heat wash at a higher temperature more effectively kills bacteria such as MRSA

Welded low profile zipper with plastised backing

This minimises the chance of any moisture ingress through the zipper sections

Unbeatable Infection Control

Feature Advantage

Internal power cord Removes chance of fouling in bed or on floor

Simple to operate control units

Auto lockout plus Care and Static Mode timeouts for maximum safety

Optional Hyper-stretch coverlet that fits all Air-Lo’s

For unrivalled comfort, insulation from cell chill and protection from reperfusion injury

Designer Innovations

Feature

Output 10 Ipm

Rotor Valve Computer Controlled

Air Release Full Hose Diameter

Noise Levels Internal Muffler system

Hose Connect Single moulding

Auto Timeouts 20 minutes Care Mode at Max pressure60 minutes Static Mode for inclined meals or transport

Power Internal to mattressBreakaway systemOptional

All Control Units

Air Alternating Overlay Support System

The Air-Lo 3 Alternating Overlay leads the field in affordable prevention of pressure areas and skin breakdowns where a lower profile overlay for lighter patients is desirable.

It’s compact, powerful yet almost silent control unit can quickly support patient loads of up to 100kg whilst alternately allowing pressure to be released across the rest of the body.

When an affordable support and therapy system is required, the Air-Lo 3 Alternating Overlay is the best value choice for safely caring for patients assessed at risk of developing pressure areas.

An optional internal Air-Lo Hyper-Stretch Coverlet can easily be fitted under all AirLo top covers to ensure maximum patient comfort and insulation.

High quality two way stretch top cover is fully welded and can be high temperature

washed for total infection control.

Elasticised side straps securely bond the

overlay to any regular single mattress.

Power cord is run inside the mattress to avoid dangerous

threading under the bed or on the floor.

Easy to use analogue control unit features a manual comfort dial, static mode with a 60 minute auto time-out and simple diagnostics. Intermittent operation ensures long pump life.

All waterfalls are turned and welded for maximum infection control and zip protection.

22 pure TPU transverse air cells alternate one in every two. They stretch under the patient to provide maximum comfort, prevention and therapy.

Static head section eliminates patient dizziness and disorientation.

Legend

A series cells and hose

B series cells and hose

Static head cells and hose

Internal power cordStandard 5m Black IEC

Zip for top cover

Zip for optional coverlet

One way valve

3

© Patient Support Systems Pty Ltd 2012

Optional open cell foamand Microfibre Coverlet(made to order in Australia)

Opening in zip toallow for power cord exit

Small pouch at end of zipto allow entry of power cord

Tag with serial numberto match top coverand pump

Static Head Cells

5 Air Alternating Overlay with Auto Tilt Sensor & Heel Suspension

The Air-Lo 5 Alternating Overlay leads the field in affordable prevention of pressure areas and skin breakdowns where a complete mattresses replacement is undesirable.


When only the very best prevention, support and therapy are required, the Air-Lo 5 AlternatingOverlay is the best value choice for safely caring for patients assessed at medium to high risk.

High quality two way stretch top cover is fully welded and can be high temperature

washed for total infection control.

All waterfalls are turned and welded for maximum infection control and zip protection.

Mattress elastics securely bond the overlay to any standard single mattress.

18 transverse air cells alternate to provide maximum prevention and therapy.


Medical grade power cord is run inside the mattress to avoid dangerous threading under the bed or on the floor.

A state of the art, internal air release valve is directly connected to the computer for instant response.

It’s high capacity ensures the fastest release of pressure possible.

Choice of three care modes and comfort settings in a simple to operate digital control unit with tamper proof lockout, static time-outs and simple diagnostics. Intermittent operation ensures long pump life.

High capacity yet unobtrusive side CPR release gives maximum

safety in the event of pulmonary emergency.

Cell disconnection valves allow the end four foot cells to be

completely deflated to assist in suspending a patient’s heels.

Tilt Sensor automatically adds more pressure when patient is inclined.


Legend

A series cells and hose

B series cells and hose

Static head cells and hose


Zip for top cover


One way valve

CPR release welded to base

5


Optional Open cell foamand Microfibre Coverlet(made to order in Australia)

Opening in zip toallow for power cord exit



8The Air-Lo 8 Alternating Mattress Replacement leads the field in affordable prevention of pressure areas and skin breakdowns.


When only the very best prevention, support and therapy are required, the Air-Lo 8 Mattress Replacement is the best value choice for safely caring for patients assessed at high risk.

High quality two way stretch top cover is fully welded and can be high temperature washed for total infection control.

High capacity yet unobtrusive side CPR release gives

maximum safety in the event of pulminary emergency. This new design can easily be opened or closed without having to un-zip

the top cover.

Medical grade power cord is run inside the mattress to avoid dangerous

threading under the bed or on the floor.

Cell disconnection valves allow the top two thirds of the end

four foot cells to be completely deflated to fully suspend

a patient heels.

A state of the art, internal air release valve is directly connected to the computer for instant response.

It’s high capacity ensures the fastest release of pressure possible.

Choice of three care modes and comfort settings in a simple to operate digital control unit with tamper proof lockout, static timeouts and simple diagnostics. Intermittent operation ensures long pump life.

All waterfalls are turned and welded for maximum infection control and zip protection

20 transverse air cells alternate to provide maximum prevention and therapy.

They also feature permanently inflated safety sections for total peace of mind.


Legend

A series cell zones & hose

B series cell zones & hose

Static head cells/zones & hose


Zip for top cover


CPR release welded to base

Side straps with clips


8 Optional Open cell foamand Microfibre Coverlet(made to order in Australia)

Opening in zip toallow for power cord




Air Alternating Mattress with Auto Tilt Sensor & Heel Suspension

Auto Tilt Sensor adjusts pressure when patient is inclined.

Wound Prevention & Treatment to Grade 4 Mostly Prevention-Some Therapy

Cell Elastics remove pressure faster longerHeels not just relieved but totally elevated

Passive pressure release onlyHeels relieved but not elevated

Targeted Wound Treatment Option No Targeted Treatment Option

Disengage cell elastics to focus treatment All cells alternate the same

Comfort without Compromise to Therapy Discomfort Often Experienced

Foam underlay insulates against “cell chill”Foam underlay reduces risk of tissue shear

Patient very close to cold cellsFirm cells may cause shearing

Total Infection Control Top Cover Tape Sealed Only

All outer surfaces welded - cover and baseOK for repeated high temperature washesNo bed straps necessary - Autostick base

Most bases stitched not weldedBase difficult to clean separatelyBed straps often tear on frame

Compare the Difference

Theraflow Standard Reperfusion Support System

DynamULink™ Turbocharged DeflationA new patented cell design uses elasticised members to transfer the power of inflating cells to force down the deflating sets.This alternately removes almost all interface pressure under nearly 80% of the patient’s body. The at risk heel area is completely elevated for nearly 30% of the alternation cycle.This unique cell design allows cell pairs to naturally remain upright when normal cells deform or collapse under patient weight.

Infection Control: All outer surfaces are fully welded. A unique “mattress within a mattress” design ensures complete protection.

Theraflow

PMS 423c

PMS 199c

PMS 285c

Typeface: Georgia RegularSecondary: Din Regular

Breakthrough pressure release technology

DynamULink™ Turbocharged Deflation A new patented cell design uses elasticised members to transfer the power of inflating cells to force down the deflating sets.

This alternately removes almost all interface pressure under nearly 80% of the patient’s body

The at risk heel area is completely elevated for nearly 30% of the alternation cycle.

This unique cell design allows cell pairs to naturally remain upright when normal cells deform or collapse under patient weight.

Infection Control: All outer surfaces are fully welded. A unique “mattress within a mattress” design ensures complete protection.

CellStay™ support system provides unparalleled support, infection indictation and comfort A highly stretchable coverlet overcomes the inverse relationship in regular systems between patient comfort and clinical effectiveness.

Completely customised therapyElastic members can be quickly engaged and disengaged under the patient - focusing therapy towards at risk areas by up to 50% from standard mode.

Top cover and base removed for illustration purposes

Industry Leader

Theraflow™

X-Sensor Pressure Map Data Male 42 - 90kgs 2010

™

Reperfusion Support System

Design so advanced - it’s a quantum leap in therapyIndependent tests show pressure release performance up to 200% more effective than current industry leading alternating systems!

√ Unparalleled comfort without the “chill” √ Cells that collapse away from the patient √ Heels not just relieved but totally elevated √ Customise to focus therapy to any area √ Reperfusion performance to treat ulcers √ Fully welded for total infection control

REPERFUSION SUPPORT SURFACE

Pressure Release Performance ComparisonsPatient Age: 42, Sex: Male Weight: 90kg

Graphs show pressure release section of alternation cycle.

0

5

10

15

20

25

30

35

Time (Mins)

Industry Leader

TheraflowPressurein mmHg

1 2 3 4 5 6 7Time (Mins)

1 2 3 4 5 6 7 8 9 10

Sacrum Heel

Breakthrough pressure release technology just got wider! All the advantages of the original Theraflow alternating mattress replacement have been designed into this new extended support system recommended for patients weighing from 40 to 180kg.

Enhanced Patient SupportAdditional, static side cells provide additional support to the to patients especially during transfers and repositioning.The new Theraflow King Single can fit any standard king single bed measuring around 105 to 110 cm in width.

New Cellstay Support CoverletA robust side skirt design integrated into the coverlet binds the whole mattress together increasing the system’s ability to support a variety of patient loads safely and securely.

Microfibre Foam for Enhanced TherapyThe coverlet is constructed with a 5cm layer of hyperstretch open cell foam which in turn is coated with a microfibre material similar to that used in high performance athletic wear to wick moisture away from the body.The coverlet therefore not only insulates the patient from “Cell Chill” but also from any excess moisture buildup. The thin foam layer also assists in avoiding reperfusion injury in patients at high risk of sub-dermal vascular damage.Turbocharged DeflationThe patented dynamulink cell design uses elasticised members to transfer the power of inflating cells to force down the deflating sets.This alternately removes almost all interface pressure under nearly 80% of the patient’s bodyThe at risk heel area is completely elevated for nearly 30% of the alternation cycle.This unique cell design allows cell pairs to naturally remain upright when normal cells deform or collapse under patient weight.

King Single Reperfusion Support System



0

5

10

15

20

25

30

35

Time (Mins)

Industry Leader


1 2 3 4 5 6 7Time (Mins)

1 2 3 4 5 6 7 8 9 10

Sacrum Heel

Breakthrough pressure release technology just got heavy duty! All the advantages of the original Theraflow alternating mattress replacement have been designed into this new bariatric support system.

Enhanced Patient SupportAdditional, static side cells provide additional support to the heavier patient especially during transfers and patient repositioning. The new Theraflow Bariatric can fit any standard king single bed measuring 107cm in width.New Cellstay Support CoverletA robust side skirt design integrated into the coverlet binds the whole mattress together increasing the systems ability to support a variety of patient loads safely and securely.

Microfibre Foam for Enhanced TherapyThe coverlet is constructed with a 5cm layer of hyperstretch open cell foam which in turn is coated with a microfibre material similar to that used in high performance athletic wear to wick moisture away from the body.The coverlet therefore not only insulates the patient from “Cell Chill” but also from any excess moisture buildup. The thin foam layer also assists in avoiding reperfusion injury in patients at high risk of sub-dermal vascular damage.Turbocharged DeflationThe patented dynamulink cell design uses elasticised members to transfer the power of inflating cells to force down the deflating sets.This alternately removes almost all interface pressure under nearly 80% of the patient’s bodyThe at risk heel area is completely elevated for nearly 30% of the alternation cycle.This unique cell design allows cell pairs to naturally remain upright when normal cells deform or collapse under patient weight.



0

5

10

15

20

25

30

35

Time (Mins)

Industry Leader


1 2 3 4 5 6 7Time (Mins)

1 2 3 4 5 6 7 8 9 10

Sacrum Heel

BARIATRIC Reperfusion Support System

™Theraflow

Authorised Distributor:

airlo & theraflow mattresses - range overview

Documents