airtrac ld laser designator · full nato stanag 3733 capability in a very compact, lightweight and...
TRANSCRIPT
Key Features• Compact efficient athermal laser
resonator• Solid state technology for increased
efficiency and long life performance• High energy with low beam divergence• No significant warm-up time• Reduced heat-load: conduction or
air cooled• Continuous operation• Shock & vibration hardened
Areté’s AIRTRAC-LD Laser Designator is a ruggedized, high-shock laser with >50 mJ pulse energy. Full NATO STANAG 3733 capability in a very compact, lightweight and low power configuration. The athermal design provides high laser pulse energy over the full MIL-SPEC temperature range with low beam divergence and a full system weighing less than 1 lb. AIRTRAC-LD has established a new standard in size for lasers of this class.
OEM CompatibleIntegration
AIRTRAC®
LD Laser Designator
Areté | 9301 Corbin Ave. Northridge, CA 91324 | arete.comPOC: James Murray | [email protected] | (303) 532-8497
Business POC | Jay Rouse | [email protected] © 2018 Areté | All Rights Reserved
This product is listed under category XII(b) of the United States Munitions List. International Traffic In Arms Regulations (ITAR) requires a valid export license prior to technical or hardware shipments or transmissions of information.
Parameter Value Comments
Weight 250 g 110140 AIRTRAC-LD resonator with electronics
Wavelength 1.06 um
Output Energy >50 mJ
Pulse Width 10-25 ns
Pulse Codes STANAG 3733 I&II
Beam Divergence <500 urad Contact Arete directly for telescope options
Beam Winder (Jitter) ≤50 urad < 1/10 beam divergence
Max Rep Rate 21 Hz
Min Rep Rate 7 Hz
Pulse Energy Stability <5% typ
Missing Pulses <2 in 120 s
Secondary Pulses None
Power (Voltage) 18-33 VDC
Average Standby/Arm power 4 W
Average Power Draw (total) <30W < 25 W for 50 mJ @ 20 Hz for most operation
Peak Current <3.0 A
Initialization Time <5 s Power on to standby
Arm Time <100 ms Standby to arm
Laser Start Up Exception <1 s
Timing Jitter <10 ns
Hot Operation +70 C SW shutdown occurs @ 71 C
Cold Storage -46 C
Cold Operation -40 C
Operating Altitude ≤15,000 ft
Non-Operating Altitude ≤25,000 ft
AIRTRAC®-LD Laser Designator
AIRTRAC-LD with Beam Expander 110160
Areté | 9301 Corbin Ave. Northridge, CA 91324 | arete.comPOC: James Murray | [email protected] | (303) 532-8497
Business POC | Jay Rouse | [email protected] © 2018 Areté | All Rights Reserved
6
6
8
1 2
88
66
66
88
1 2 1 2
arete.com
AIRTRAC®-LD Laser Designator
Areté AssociatesPOC: James Murray | [email protected] | (303) 532-8497www.arete.comCopyright @ 2018 Areté Associates | All Rights Reserved
Parameter Value CommentsWeight 250 g 110140 AIRTRAC-LD resonator with Electronics
Wavelength 1.06 umOutput Energy >50 mJPulse Width 10-25 nsPulse Codes STANAG 3733 I&IIBeam Divergence <500 urad Contact Arete directly for telescope options
Beam Winder (Jitter) ≤50 urad < 1/10 beam divergence
Max Rep Rate 21 HzMin Rep Rate 7 HzPulse Energy Stability <5% typMissing Pulses <2 in 120 sSecondary Pulses NonePower (Voltage) 18-33 VDCAverage Standby/Arm power 4 WAverage Power Draw (total) <30W < 25 W for 50 mJ at 20 Hz for most operation
Peak Current <3.0 AInitialization time <5 s Power on to Standby
Arm Time <100 ms Standby to Arm
Laser start up exception <1 sTiming jitter <10 nsHot Operation +70 C SW Shutdown Occurs @ 71 C
Cold Storage -46 CCold Operation -40 COperating Altitude ≤15,000 ftNon-Operating Altitude ≤25,000 ft
AIRTRAC Standard Resonator 110140
2.72” x 1.94” x 1.25”250 g w/electronics
This product is listed under category XII(b) of the United StatesMunitions List. International Traffic In Arms Regulations (ITAR)requires a valid export license prior to technical or hardwareshipments or transmissions of information.
2.72” x 1.94” x 1.25”250 g w/electronics