albachem alba-bro dtg pretreatment spray · direct-to-garment (dtg) general information/technical...
TRANSCRIPT
Direct-To-Garment (DTG)General Information/Technical Data Sheet
AlbaChem® ALBA-BRODTG Pretreatment SprayGeneral Description:Alba-BRO is a universal dtg pretreatment spray for cotton materials. It may be used on all colors with the greatest benefit on dark (black) materials. It is specifically designed to minimize staining and blocking. It will increase color brilliance and provide a soft feel to the image. Washer/Dryer safe. Alba-BRO is meant for use on *Brother® printers and inks.
Benefits:
36-41 36th Street Long Island City, NY 111065439 SanFernando Road West, Los Angeles, CA 90039Tel: (718) 392-6272 www.albachem.com [email protected]
• Smooth Even Coverage• Non-Staining• Soft Feel• Great for small print areas: sleeves, left chest, neck tag etc.
Packaging: • Item No. Package Size
1680 Net Wt. 15.75oz.Case Pack Case Weight
12 cans 16 lbs.
*The shipping designation of Limited Quantity is only valid for shipments by ground with NAFTA (United States, Canada and Mexico). Air shipments to any location (domestic or international) and ALL shipments outside of NAFTA require non-flammable gas labeling. The proper shipping name is: Aerosols, Non-Flammable Gas 2.2, UN 1950.
Technical Data:Physical Properties:Appearance: Clear colorless liquid in aerosol can Solubility in Water: CompleteOdor: Mild to odorlessChemical Family: Saline Solution with Nitrogen Propellant
Hazmat Information*Limited Quantity Exemption
Environmental:Volatile Organic Compound (VOC): No 0%Hazardous Air Pollutant (HAP): No Ozone Depleting Substance: No SARA 313 Chemicals: None Contains No Alkylphenol Ethoxilates
Directions for Use:Shake well. Holding can approximately 6" from fabric, spray Alba-BRO in a slow steady motion horizontally covering print area. On dark colors repeat in a vertical pattern. Cure on heat press @ 330-360°F for 30 seconds. Do not clamp down too tight.
Tip: To prevent crystallization, try hovering the heat press over the fabric for 20 seconds before pressing.
*BROTHER is a registered trademark of Brother Industries Ltd.