alc operation with ericsson air antenna - kathrein usa · pdf filealc operation with ericsson...

ALC Operation With Ericsson Air Antenna

1

KATHREIN USA, Inc 214 238-8812

Begin by turning the ALC on and connecting the RF jumper from the ALC to the + DIN port on the AIR antenna.


2


Continue by tapping the Connect to ALD button.


3


Note the scan process is finished. Tap Menu.


4


Tap ALD Configuration.


5


Note the suffix A1 on the RET serial number. It refers to the RET on the Active antenna (internal radio). Tap the

Details button.


6


The current Tilt Value appears. If you want to change it, tap the button.


7


The Tilt Setting screen appears. Tap a new tilt value (for example “5”).


8


Tap OK.


9


This screen will appear during the tilt operation.


10


When the new tilt value is reached, this screen will appear.


11


Continue by connecting the RF jumper to the – DIN port.


12


Tap Reconnect to ALD.


13


Proceed as before.


14


Note the ALD serial number has a suffix of P1. It refers to the RET on the Passive antenna (the one with the DIN

connectors we are currently working with).


15


Once again, the current Tilt Value appears. If you want to change it, tap the button.


16


The Tilt Setting screen appears. Tap a new tilt value (for example “4”).


17


Tap OK.


18


This screen will appear during the tilt operation.


19


When the new tilt value is reached, this screen will appear.


20


Notes:

• Depending on the AIR antenna model, the frequency ranges of the Active and Passive antennas may be

different from the one in this MOP

• Earlier models must be powered down in order to access the RETs in this manner

• The ALC contains a GUI that can be accessed by connecting a laptop or tablet by means of a built in WiFi

connection

alc operation with ericsson air antenna - kathrein usa · pdf filealc operation with ericsson...

Documents