alcatel 1000 softswitch e10 software release 26
DESCRIPTION
The Alcatel 1000 Softswitch E10, Release 26, has been designed to accompany operators entering the NGN world.By either providing a stand-alone softswitch in a pure NGN environment or by smoothly migrating the installed base, Release 26 helps operators to implement their strategy. In both cases, the Alcatel 1000 Softswitch E10 is able to simultaneously handle time division multiplexing (TDM) and voice over IP (VoIP) traffic.TRANSCRIPT
The Alcatel 1000 Softswitch E10, Release 26, has
been designed to accompany operators entering
the NGN world.
By either providing a stand-alone softswitch in a
pure NGN environment or by smoothly migrating
the installed base, Release 26 helps operators
to implement their strategy. In both cases, the
Alcatel 1000 Softswitch E10 is able to simultane-
ously handle time division multiplexing (TDM)
and voice over IP (VoIP) traffic.
The Alcatel 1000 Softswitch E10 supports trunking
gateways (TGWs) in a first step and VoIP access
gateways (AGWs) in a second step while ensuring
full continuity of end-user services, full interop-
erability with the Alcatel 1000 E10 switches,
full compatibility with network management
and signaling interfaces as well as interworking
with other NGN components.
The Alcatel 1000 Softswitch E10 is a key element
of Alcatel’s NGN portfolio. It helps safeguard
service providers’ Alcatel 1000 E10 installed base
and its embedded feature richness by providing a
consistent strategy towards NGN, where Alcatel
1000 MM E10 switches become part of NGN
migration. The Alcatel 1000 Softswitch E10 is the
most cost-effective, future-safe and reliable way
to migrate the installed base toward NGN.
Alcatel 1000 Softswitch E10 Software Release 26
The Alcatel 1000 SoftswitchE10 is an important elementof a cost-effective, future-proof, reliable NGNmigration strategy.
Technical Summary
Features
> Voice switching and softswitching on the same platform
> Full-fledged local and transit services> Full NGN-TDM interworking (handles
both TDM- and NGN-based traffic)> NGN Class 4 services in a single-softswitch
or multi-softswitch architecture> Controls multi-vendor H.248 gateways> Supports CODEC negotiation, ISUP
continuity tests, transparent 64 Kb/schannels and echo control
> Supports any operator services, end-userbearer services, teleservices or supplemen-tary services, including intelligent network(IN) services, as well as system features, all for local and transit applications
> Provides NGN call charging, observation,supplementary services, echo control devicehandling, routing enhancement and bearerchannel establishment before ringing
> Supports all IN, management and networksignaling protocols supported by the Alcatel1000 Softswitch E10 generic applicationsoftware release
> Supports legacy network interfaces, sub-scriber interfaces and subscriber connectionunits that are supported by the genericapplication software release
Capacity
> 16,000 equivalent E1 or 480,000 trunks> 2,000 media gateways> 8 million busy hour call attempts (BHCA)
without IN calls> 2.5 million BHCA with 100 percent IN calls
* Future release
Protocols
> H.248/Megaco over UDP/IP for mediagateways
> BICC/CS2 (Q.1902.1 to 6; Q.1970;Q.1990) (with another Alcatel softswitch or any BICC/CS2-compliant softswitch)
> Preferred network signaling transport isTDM links connected to Alcatel 1000 MME10’s core, either directly (associated mode)or through STP (quasi-associated mode)
> Network signaling transport over packet:• Circuit-emulation mechanism• External signaling gateways,
e.g., Alcatel 5023 RTG/RSG > SS7 ITU-T ISUP V3 plus national adaptations> INAP> Interworking with legacy subscribers
(CSN, V5.2 AN) > Interworking with legacy network signaling
(ISUP, CAS)> BICC-to-BICC transit service available> Standard Alcatel network management > SIP*> SIGTRAN*
System Configuration
> Based on the standard Alcatel 1000 MME10 platform
> N + P common hardware multiprocessorstations for real-time distributed and scalablecontrol (media gateway controller applicationredundancy over active-active SMB)
> No single point of failure> 99.999 percent availability> Large-scale integration CMOS components,
Power PC, Power Quick processors, µBGAtechnology
> High-performance DSP, 0.35 µm ASICSembedding up to 250,000 gates
> Surface mounting technology, up to 12 layered printed boards (UTE Classes 5, 6 and 8), microvia technology (100 µm)
> High-capacity connectors and inter-rackcabling prepared during production phase
> Highly scalable subscriber access unit and core switch
> Configuration validated before delivery for quick, reliable operation
> Duplicated LAN for interstations datacommunication (N x 16 Mb/s token ring)
> Automatic fault detection, containment of failures, automatic reconfiguration
> Mirror disks
Operating Environment
Power
> 48 V DC rack power> 3.3-V and 5-V board power
Power Consumption
> Main boards: 20 W to 50 W> Applique boards: Up to 20 W
Temperature and Humidity
Normal operation
> Air temperature: 5° C to 40° C> Relative humidity: 5 to 85 percent
Short-term operation
> Air temperature: -5° C to 45° C> Relative humidity: 5 to 90 percent
Certification Compliance
> ITU-T and ETSI specifications> Compliant with all electrical, security
and EMC specifications> ISO 9000 quality specification> Adaptation on request to anti-seismic
standard compliance
Alcatel 1000 Softswitch E10 | Software Release 26
w w w. a l c a t e l . c o m
Alcatel and the Alcatel logo are registered trademarks of Alcatel. All other trademarks are the property of their respective owners. Alcatel assumes no responsibility for the accuracy of the information presented, which is subject to change without notice. © 12 2003 Alcatel. All rights reserved. 3CL 00328 00009 TQZZA Ed. 02 17666