aler medical || smart transfer

8

Upload: aler-medical

Post on 23-Mar-2016

227 views

Category:

Documents


2 download

DESCRIPTION

Aler Medical || Smart Transfer

TRANSCRIPT

Page 1: Aler Medical || Smart Transfer
Page 2: Aler Medical || Smart Transfer

Precisely indexed but designed to disengage at the point of tension leaving one half on the implant platform, and the other half in the impression.

Standard Copings(IST, IMT, IMTW)

SmarTransfer™ Impression Copings

(I2T, I2WT, IS2T)

Page 3: Aler Medical || Smart Transfer

The assembly contains 3 parts: Base Transfer, Upper Transfer, and the Long Impression Screw.

SmarTransfer™ Impression Copings are an excellent solution when attempting to record divergent implants.

PLATFORM

Standard

Wide

SQ

REFERENCE

12T

12WT

IS2T

COLOR

Silver

Green

Magenta

They consist of two components precisely indexed but designed to disengage at the point of tension leaving one half on the implant platform, and the other half in the impression. The

When implants are placed in non-parallel positions, it may be difficult to remove the impression using conventional copings (IST, IMT or IMTW). The divergence of the implants can even cause tearing or ripping of the impression material when the impression is removed.

segment of the coping that remains attached to the platform is simply removed and reunited with the half in the impression. In this way, no tearing, ripping or distortion will occur. The registration is kept precise and accurate even in a full-arch impression.

The SmarTransfer™ is available for each of the three Intra-Lock implant platforms, and is color coded.

Page 4: Aler Medical || Smart Transfer

Precisely indexed but designed to disengage at the point of tension leaving one half on the implant platform, and the other half in the impression.

This cutaway view illustrates three different Intra-Lock platform implants with divergent paths of insertion.

Three Smartransfer™ copings in place. (Note: Each Apical Component is color coded for each platform.

A Contra-Angle Driver for long screws (CDCAS) secures the coping assembly to the Implant.

Open-tray impression is made.

Page 5: Aler Medical || Smart Transfer

Coping screws are removed.

Remove the base transfer componet...

Upon removal, observe that one transfer components has remained indexed in the implant. A clean detachment occured without a tear in the impression material.

...and reposition it in the impression.

Page 6: Aler Medical || Smart Transfer

Precisely indexed but designed to disengage at the point of tension leaving one half on the implant platform, and the other half in the impression.

The indexing configuration ensures the maintenance of accuracy.

...and secured into place by Impression Coping Screws.

Analogs with matching colors to the Upper Transfer Component are then placed...

Die Stone is then poured to create a working model.

Page 7: Aler Medical || Smart Transfer

Once the die stone has set, Coping Screws are removed.

Lingual view of working model achieved with SmarTransfer™ Copings.

SmarTransfer™ Impression Copings provide accuratereproduction and maintainprecise registration even in a full-arch impression containing divergent implants.

Page 8: Aler Medical || Smart Transfer

GLOBAL HEADQUARTERS6560 West Rogers Circle, Bldg. 24 • Boca Raton, Florida 33487 USA

Tel: 877-330-0338www.intra-lock.com • [email protected]

Intra-Lock® is a registered trademark of Intra-Lock International, Inc.SmartTransfer™ is a trademark of Intra-Lock International, Inc.

U.S. & Foreign Patents Pending.

0499 • EC Rep: Intra-Lock System Europa, Spa., I-84100 Salerno • © Copyright 2008, Intra-Lock® System International • S4EN-08-7CE