all geared precision radial drilling machine
TRANSCRIPT
8/9/2019 All Geared Precision Radial Drilling Machine
http://slidepdf.com/reader/full/all-geared-precision-radial-drilling-machine 1/2
ALL GEARED PRECISION RADIAL DRILLING MACHINE Page 1 of 2
ALL GEARE
PRECISION
RADIAL
DRILLING
MACHINE
8/9/2019 All Geared Precision Radial Drilling Machine
http://slidepdf.com/reader/full/all-geared-precision-radial-drilling-machine 2/2
ALL GEARED PRECISION RADIAL DRILLING MACHINE Page 2 of 2
SALIENT FEATURESMachines main body is made of closed grain cast iron.
All moving parts are made from alloy steel and are hardened and ground to precision.
All gears and driving shafts are forced lubricated while running continuously for longer life and better performance.
Machine provided with double column. The outer column revolves on bearings against base ring of the inner
column to give free movement to arm.
Inner column is adequately ribbed to give required rigidity to the machine.
Spindle head is box type suitably designed to withstand any distortion by twisting, sagging or vibration while inoperation.
Spindle head is provided with roller bearings to facilitate easy and smooth movement on the guide way of the arm
Spindle sleeve is guided in closely honed headstock bore to give close tolerances. Hardened and ground spindle is supported in precision bearings.
9 spindle speed and 4 Auto feeds are provided with precise depth control device with automatic stop at the
present depth.
The main spindle have arrangement for the auto feed as well as manual head feed operations. The elevating mechanism of the radial arm is powered independently, with separate motor for effort free movement
of the arm. Limit switches are provided to safeguard against any accidental overshooting and also elevation of the
arm is interlocked with arm locking lever . These arrangement protect the machine from the damages. The base is enclosed type and heavily ribbed. It is provided with machined T-Slots for clamping working Table
Jigs and fixture. A Built in reservoir in the base for the coolant is provided. This helps in independent mounting of coolant pump.
TECHNICAL SPECIFICATIONSITEM CODE NO. ABM-MT-6020
Drilling Capacity in Steel 35 MM
Drilling Capacity in Cast Iron 38 MM
Maximum Drilling Radius 790 MM
Minimum Drilling Radius 265 MM
Maximum Distance Between Spindle Nose to Base 950 MM
Minimum Distance Between Spindle nose to Base 395 MM
Horizontal Transverse of Drilling Head 540 MMVertical Transverse of Arm 534 MM
Number of Spindle Speeds 9
Range of Spindle Speeds 65 to 1450 RPM
Number of Feeds 4
Range of Feeds 0.4 to 0.1 MM/REV.
Quill Movement Maximum 255 MM
Taper in Spindle MT – 4
Base Working Area 765 x 925 MM
Table Working Size 520 x 415 x 410 MM
Main motor Power 2 H.P.
Arm Elevation Motor Power 1 H.P.
Nett Weight 1600 KG.
L x W x H 765 x 1465 x 1850 MM
All Specifications are subject to change towards improvements without any prior notice.
Manufactured by ABM Fasteners (India) and Export Marketing by ABM Tools
STANDARD EQUIPMENTElectrical Motor, Control Panel w
Limit Switches & Wiring, FlexiMachine Lamp and Coolant Pump
EXTRA EQUIPMENTSWorking Table and Machine Vice
Postal Address : 79A, Pocket GG-1, Vikas Puri, New Delhi – 110018, India
Phone : 91 0 9891027608 Fax : 91-11-2554 0898
www.abmtools.com
e-mail : [email protected]