alloyweld inspection co. inc. · · 2016-07-11ac7114/1s rev i - nadcap supplemental audit...

Performance Review Institute (PRI) | 161 Thorn Hill Road | Warrendale, PA 15086-7527

Joseph G. PintoVice President and Chief Operating Of� cerJoseph G. Pinto

In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of theaudit,this certificate is granted and awarded by the authority of the Nadcap Management Council to:

Alloyweld Inspection Co. Inc.

796 Maple Ln Bensenville, IL 60106

United States

This certificate demonstrates conformance and recognition of accreditation for specific services, aslisted in www.eAuditNet.com on the Qualified Manufacturers List (QML), to the revision in effect at the

time of the audit for:

Aerospace Quality System (AC7004)

Certificate Number: 3327160660Expiration Date: 31 October 2017

SCOPE OF COMPLIANCE Aerospace Quality Systems

Alloyweld Inspection Co. Inc. 796 Maple Ln

Bensenville, IL 60106

This certificate expiration is updated based on periodic audits. The current expiration date and scope of

accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following:

AC7004 Rev E - Nadcap Audit Criteria for Quality Management System

t-frm-17 (17-Jun-10)


Joseph G. PintoVice President and Chief Operating Of� cerJoseph G. Pinto

In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of theaudit,this certificate is granted and awarded by the authority of the Nadcap Management Council to:



United States



NonDestructive Testing


t-frm-17 (17-Jun-10)

SCOPE OF ACCREDITATION NonDestructive Testing



This certificate expiration is updated based on periodic audits. The current expiration date and scope of

accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to this facility to perform the following:

AC7114 Rev G - Nadcap Audit Criteria for NonDestructive Testing (NDT) Suppliers Accreditation (to be used on audits before 25 January 2015) AC7114S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing (NDT) Suppliers Accreditation Program (to be used on audits before 25 January 2015) S–U1 Honeywell S–U11 The Boeing Company S–U17 Sikorsky S–U18 Hamilton Sundstrand S–U21 Eaton S–U6 Rolls–Royce Corporation (refer to U3 Supplemental questions) AC7114/1 Rev G - Nadcap Audit Criteria for NonDestructive Testing Facility Penetrant Survey (to be used on audits before 25 January 2015) AC7114/1S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Penetrant Survey (to be used on audits before 11 October 2015) S–U1 Honeywell S–U17 Sikorsky S–U18 Hamilton Sundstrand S–U21 Eaton S–U6 Rolls–Royce Corporation (refer to U3 Supplemental questions) AC7114/2 Rev G - Nadcap Audit Criteria for NonDestructive Testing Magnetic Particle Survey (to be used on audits before 25 January 2015) AC7114/2S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Magnetic Particle Survey (to be used before 11 October 2015) S–U1 Honeywell S–U17 Sikorsky

t-frm-17 (17-Jun-10)

S–U18 Hamilton Sundstrand S–U6 Rolls–Royce Corporation (refer to U3 Supplemental questions) AC7114/3 Rev H - Nadcap Audit Criteria for NonDestructive Testing Facility Ultrasonic Survey (to be used on audits before 25 January 2015) AC7114/3S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Ultrasonic Survey (to be used on audits before 11 Ocrober 2015) S–U11 The Boeing Company S–U18 Hamilton Sundstrand S–U6 Rolls–Royce Corporation (refer to U3 Supplemental questions) AC7114/4 Rev G - Nadcap Audit Criteria for NonDestructive Testing Facility Film Radiography Survey (to be used on audits before 25 January 2015) AC7114/4S Rev I - Nadcap Supplemental Audit Criteria for NonDestructive Testing Facility Film Radiography Survey (to be used on audits before 11 October) S–U1 Honeywell S–U18 Hamilton Sundstrand S–U6 Rolls–Royce Corporation (refer to U3 Supplemental questions) AC7114/6 Rev B - Nadcap Audit Criteria For NonDestructive Testing Facility Digital Radiography, Digital Detector Array (DDA) Survey AC7114/8 Rev A - Nadcap Audit Criteria for NonDestructive Testing Computed Radiology, Utilizing Photostimulable Luminescence (PSL)Survey

August 04, 2015

Jennifer Anaya Alloyweld Inspection Co. Inc. 796 Maple Ln Bensenville, IL 60106 Dear Jennifer Anaya The report of the Nadcap accreditation audit of your facility on July 20 - July 22, 2015 has been approvedfor Nadcap accreditation. Nadcap accreditation entitles your organization to appear on the QualifiedManufacturers List (QML). Accordingly, we have enclosed your certificate(s) of accreditation/compliance,scope of accreditation and a logo sheet with a description on the uses of the PRI Mark of Conformity.Customers may be directed to the Online QML at www.eAuditNet.com for relevant accreditation datesand information. **Note that if any changes occur within your company (i.e., ownership, key managerial staff,equipment, company name, quality manager, address, etc.) that may affect your capability orscope of accredited activities, you are required to notify PRI Staff immediately by completing thet-frm-11: "Notification of Change / Request for Revised Certification" form located ineAuditNet.com/Resources/Documents/Procedures and Forms/Nadcap Controlled Forms/tforms. We would like to congratulate you on your achievement in meeting the stringent requirements of Nadcapaccreditation. If you have any questions concerning the Nadcap Process, please contact PRIHeadquarters at +1 (724) 772-1616.

Sincerely,

CATHY RUSH ASSOCIATE CSR Nadcap Business Unit

/CR Enclosures: Certificate(s) Scope of Accrediation Logo Sheet Use of the Mark of Conformity (s-frm-48)


Joseph G. PintoExecutive Vice President and Chief Operating Of� cerJoseph G. Pinto

This certificate is granted and awarded by the authority of the Nadcap Management Council to:



United States



Welding


SCOPE OF ACCREDITATION

Welding



This certificate expiration is updated based on periodic audits. The current expiration date and scopeof accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to

this facility to perform the following: AC7110 Rev E - Nadcap Audit Criteria for Welding/Brazing AC7110/1 Rev G - Nadcap Audit Criteria for Brazing (Torch/Induction) (to be used on auditsbefore 7 August 2016) Baseline (All audits) Supplement A – Torch (Additional requirements) Supplement E – GTA Tack Welding (Additional requirements) Supplement F – Stress Relieve (Additional requirements) Supplement G – Processes using gas (Additional requirements) Supplement H – Processes using Flux – (Additional requirements) AC7110/5 Rev H - Nadcap Audit Criteria for Fusion Welding Baseline (All audits) Supplement C – Automatic / Semi–automatic (Additional requirements) Supplement E – Foundry in–process completion / repair welding of castings (AdditionalRequirements) Supplement F – Filler Materials (Additional requirements) Supplement G – Processes using Gas (For example GTAW, PAW) (Additional requirements) Supplement H – Preheat / Interpass temperature control (Additional requirements) Supplement I – Stress Relieve (Additional requirements) Supplement J – Tack Welding (Additional requirements) AC7110/5S Rev D - Nadcap Supplemental Audit Criteria for Fusion Welding U00 None

t-frm-17 17-Jun-10

AC7110/12 Rev F - Nadcap Audit Criteria for Welder/Welding Operator Qualification (Thischecklist is required if the audit includes AC7110/3, /5 or /6) Baseline (All audits) Supplement A – Metallographic Evaluation of Qualification Welds (Additional requirements) AC7110/12S Rev G - Nadcap Supplemental Audit Criteria for Welder/Welding OperatorQualification (This checklist is required if the audit includes AC7110/3, /5 or /6) (to be used onaudits before 4 September, 2016) U00 None

Alloyweld Inspection Co. Inc. #2Bensenville, IL

t-frm-17 17-Jun-10


Joseph G. PintoExecutive Vice President and Chief Operating Of� cerJoseph G. Pinto

This certificate is granted and awarded by the authority of the Nadcap Management Council to:



United States



Chemical Processing

Certificate Number: 3327165478Expiration Date: 31 January 2017

SCOPE OF ACCREDITATION

Chemical Processing



This certificate expiration is updated based on periodic audits. The current expiration date and scopeof accreditation are listed at: www.eAuditNet.com - Online QML (Qualified Manufacturer Listing).

In recognition of the successful completion of the PRI evaluation process, accreditation is granted to

this facility to perform the following: AC7108 Rev G - Nadcap Audit Criteria for Chemical Processing CLEANING AND DESCALING AS STAND ALONE PROCESSES Acid Cleaning (If Titanium Acid Cleaning is also carried out then please check “Chemical Cleaning– Titanium Cleaning – Acid” also) Alkaline Cleaning (If Titanium Alkaline Cleaning is also carried out then please check “ChemicalCleaning – Titanium Cleaning – Alkaline” also) Titanium Cleaning – Acid (This process also requires “Chemical Cleaning – Titanium Cleaning –Alkaline” to also be checked unless customer specifications permit otherwise) Other Titanium Cleaning Acid Titanium Cleaning – Alkaline CONVERSION COATING Aluminum ETCH AS A PREPARATION FOR NDT (AC7108/2 MUST ALSO BE SELECTED) (to be used onaudits before 3 January 2016) Ovens Used at a Set Point Above 250°F Ovens Used at a Set Point of 250°F or Below PASSIVATION Solution Analysis In Support of AC7108 Testing Performed Internally In Support of the Chemical Process Accreditation B05 – Salt Spray Testing In Support of AC7108 B06 – Water Immersion / Humidity Testing In Support of AC7108 B10 – Adhesion Testing (Adhesion Tape Testing) In Support of AC7108 B21 – Other Testing In Support of AC7108 AC7108/2 Rev D - Nadcap Audit Criteria for Etch Processes (Blue Etch Anodize, Local,

t-frm-17 17-Jun-10

Macrostructure, Nital/Temper, Pre-Penetrant)(to be used on audits before 3 January 2016) Nital/Temper Etch Pre–Penetrant Etch Solution Analysis Performed On Site in Support of Etch Processes

Alloyweld Inspection Co. Inc. #2Bensenville, IL

t-frm-17 17-Jun-10