allteccorporation_lightningprotectioncatalog

8/13/2019 AlltecCorporation_LightningProtectionCatalog

1/68

Global Leader in the design,

manufacture, and installation ofgrounding systems, surge suppression,and lightning protection

Solut ion Providers for an Energized WorldT


2/68


3/68

ALLTEC Lightning Protection Equipment CatalogAll Rights Reserved. No part of this publication may be reproduced, stored in a retrieval

system, or transmitted in any form by any means (electronic, mechanical, recording, or otherwise), without the express written permission of

ALLTEC Corporation. ALLTEC Corporation is constantly seeking to improve our products, specifications are subject to change at anytime. Please

note that every effort was taken to maintain accuracy in this publication; however, ALLTEC Corporation assumes no responsibility for any errors

that may occur.

Introduction

Company OverviewSince 1991, ALLTEC Corporation has proven itself to be a global leader in the design, manufacture, and installation

of grounding systems, surge suppression, and lightning protection. As Solution Providers for an Energized

World, we offer a comprehensive facility approach to solving the worlds most difficult lightning and power

quality issues. Based on vast experience and reputation, we have installed systems on thousands of government,

commercial, historical, industrial, and residential properties. Our technical and consulting services are utilized

by many Fortune 500 companies around the world. ALLTECs project managers and engineers work with your

company to implement the best, most cost effective solution.

Vision

Our vision is to be the worlds most dynamic lightning protection & power quality company, crafting unsurpassedsolutions to better the safety and productivity of people and businesses everywhere. Our core objective is to

be paramount in the quality of our products and services. We aim to create a diverse, vibrant, and creative

corporate environment, with customer needs as our central business focus. We strive continuously for a globally

recognized excellence and work to advance and improve industry standards.

MissionOur mission is to exceed the expectations of our customers by aspiring to the highest level of excellence in

our products and services. We accomplish this by committing our shared resources and knowledge to achieve

superior customer satisfaction.

MethodologyThe ALLTEC Protection Pyramid provides a three-step comprehensive facility approach for grounding solutions,

surge suppression, and lightning protection. Our system begins with the installation of a code compliant,

single-point, low resistance/low impedance grounding system, sized to carry the full amplitude of short circuit

current safely to the ground. Next, surge protection devices are staged to dramatically filter the voltage, current

and frequency surges. Finally, a well designed lightning protection system is created to protect against direct

lightning strikes.


4/68

Alltec Corporation

64 Catalyst Drive

Canton, North Carolina, USA 28716

TEL: +1 828.646.9290 / FAX: +1 828.646.9527 / URL: www.allteccorp.com / EMAIL: [email protected]

Products

I. Grounding SystemsThe three-step ALLTEC Protection Pyramid begins with the installation of a stable, low resistance/low

impedance grounding system to bond all electrically conductive surfaces together.

TerraDyne Electrolytic Grounding System

TerraFill Ground Enhancement Material

TerraBar Ground Bus System

TerraWeld Exothermic Welding System

II. Surge Suppression

The second stage of protection comes from a properly installed surge protection device, or SPD system, which

reduces the magnitude of random, high energy, short duration electrical power anomalies. These occurrences

are typically caused by atmospheric phenomena (such as lightning strikes), utility switching, inductive loads,

and more internally generated over-voltages. In response to this demand, ALLTEC offers:

PowerTrip line of surge suppression products

III. Lightning ProtectionFinally, a well-designed customized lightning protection system will be installed to safeguard facilities from direct

lightning strikes. Traditional lightning protection methods as well as some of the most advanced technologies

are available at ALLTEC Corporation:

TerraStat Charge Dissipation Terminals

TerraStreamer Early Streamer Emission Terminals


5/68

Alltec Corporation

64 Catalyst Drive



Services

Manufacturing Capabilities & Quality Assurance

ManufacturingALLTEC Corporation is committed to excellence. We ensure our customers the highest caliber of services and

products through our continual investment, testing, and evaluation of our products. Our corporate office and

manufacturing facility are nestled in the Blue Ridge Mountains of North Carolina, which is centrally located

between two of the largest metropolitan areas in the Southeastern United States. Our production facility is

furnished with state-of-the-art equipment, which enables us to produce an extensive line of products while

adhering to rigid design and quality standards. We use only the finest materials to construct our products. You

can be assured that if its made by ALLTEC, its quality.

QualityIt is ALLTECs policy to strive to meet or exceed customer expectations. Our quality systems and processes are

continually being improved to satisfy our customers changing needs. ALLTECs ISO 9001:2008 quality certification

and focus on Six Sigma ensures its customers receive superior quality products. We have implemented rigorous

quality systems and testing to ensure our continued success. Internal management systems have been designed

to monitor and maintain quality at all levels of service and production.

At ALLTEC Corporation, quality and customer service form the foundation of our business. Our process begins

with diligent quality control inspections during the manufacturing process and continues with step-by-step

inspections throughout the entire order filling and shipping process. This calculated and controlled environment

ensures that each shipment contains exactly what was ordered, is packaged correctly, and shipped efficiently

from ALLTEC to the customer on time. We use only first-class distributors to assist in the process and have

ultimately created a comprehensive global network. ALLTEC is committed to creating and maintaining powerful

customer relationships, and we look forward to serving you for many years to come.


6/68

Alltec Corporation

64 Catalyst Drive



General Information

Ability to ServeALLTEC Corporation has the capability to design, manufacture, and install any lightning protection or grounding

system you may require. Our complete engineering facilities are prepared to assist you with any special or

unusual requirements.

Claims & ShortagesPlease be aware that ALLTEC Corporation assumes no liability for any damage to goods in shipment. All materials

must be inspected upon receipt BEFORE signing for acceptance of shipment. Once you have signed the bill of

lading accepting shipment, you are acknowledging that you have received the shipment in full and with no

damage. Any damages or shortages need to be noted on the bill of lading before signing and immediately file

a claim with the delivering transportation company. It is our policy that any claims for shortages or errors mustbe made within 24 hours after receipt of goods. Any error on our part will be taken care of promptly and at no

cost to you, the customer. Any shortages found and reported more than 24 hours after shipment acceptance

will not be replaced free of charge.

International CustomersOur exporting policy is available upon request. This policy may vary slightly, depending upon the receiving

country and its Customs procedures. ALLTEC Corporation offers all of our engineering and design services

worldwide.

Documentation & Wire Transfer FeesALLTEC Corporation charges standard customary fees for obtaining and processing documents for overseas

shipments. Any wire transfer or bank fees are the responsibility of the customer and will be included in the price

quotation supplied before the shipment leaves our warehouse.


7/68

Alltec Corporation

64 Catalyst Drive



Terms and Conditions

1. DefinitionsThe term Seller means ALLTEC Corporation, the termBuyer means the company, person or other entity who

is the purchaser of the Goods, the term Goods means any goods or materials ordered and sold pursuant to the

terms and conditions set forth herein.

2. PriceUnless otherwise stated, price of the Goods shall be the price in effect at the date and time of shipment. Seller

reserves the right to adjust price based on volume purchases; any discounts allowed for volume purchases

will be in the Sellers sole discretion. Price does not include any sales, use, excise or similar taxes which shall

be added to the price of the Goods and shall be the responsibility of Buyer. Unless otherwise stated, minimum

order is $125.00 (excluding freight) on any single order. Each shipment will be separately invoiced.

3. Payments TermsTerms of payment are net thirty (30) days. Service charge on late payments shall be applicable at the rate of one

and one-half percent (1.5%) per month or an annual percentage rate of eighteen (18%) per annum. In addition,

Buyer shall be obligated for Sellers reasonable collection agency or attorneys fees that may be incurred by

Seller to collect any sums due Seller hereunder or service charge. Seller reserves the right to apply any payments

received from Buyer to any outstanding invoice of Seller at Sellers sole discretion.

4. Freight

The purchase price of the Goods shall be EXWORKS, Canton, NC or other named shipping point. In situationsof prepay and add, ALLTEC is unable to provide a copy of the actual freight bill due to agreements with our

carriers regarding rate disclosure confidentiality.


8/68

Alltec Corporation

64 Catalyst Drive




5. Delivery(a) Seller s place and point of delivery shall be deemed to be delivery to a carrier at Sellers plant in Canton,

NC, or such other designated shipping point designated by Seller. If Buyer fails to furnish complete

shipping directions to Seller within a reasonable time of placing the order, Seller, at Sellers discretion,

may make necessary shipping arrangements with a carrier selected by Seller, the cost of which shall be

paid by Buyer.

(b) If and to the extent a delivery date is stated, it is the estimated delivery date only. All accepted orders,

whether or not delivery dates are specified thereon, shall be subject to delays or failures in manufacture

or delivery due to causes beyond the control of Seller or carrier. Buyers obligations shall continue

notwithstanding any delay in delivery, provided if performance by Seller is prevented in whole or in

part for a period of three (3) consecutive months, then in such event Seller or Buyer (provided Buyer is

not responsible for the delay) may cancel any order that has not been shipped as of such date.

(c) If for any reason, the Buyer is unable to accept the delivery of Goods according to the mutually

established schedule; the Seller, at its option and after three (3) days written notice to the Buyer, may

place the Goods in storage. In such event, the Buyer shall pay any and all storage or other related costs.

If the Buyer fails to accept any delivery or part thereof, the Seller, at its option, may treat such failure as

a breach of this Agreement and exercise any and all remedies available to it pursuant to the terms and

conditions set forth herein or available to it as a matter of law.

6. CreditThe Sellers obligations are at all times subject to the Sellers approval of the Buyers credit standing. Upon request,

the Buyer shall furnish the Seller such credit information as may be customary and reasonably requested by theSeller. At its discretion, the Seller reserves the right to require payment in advance, C.O.D., and/or otherwise

modify credit terms. If at any time the Buyer is past due with respects to amounts due, the Seller at its option

(without liability or prejudice to any other remedies), may decline to ship or stop any Goods in transit until such

time the Seller (1) receives payment in full of all amounts owing to it by the Buyer or (2) otherwise receives

assurances satisfactory to the Seller of such payment.

7. Risk of LossRisk of loss or damage to the Goods shall be solely that of Buyer upon delivery to a carrier for shipment; any loss

or damage subsequent to such delivery shall not be the responsibility of Seller, provided further any such loss

shall not release Buyer from Buyers obligation to pay for the Goods. Any claim for damage or loss in transit must

be asserted by Buyer against the carrier.

8. WarrantySeller warrants that the Goods will conform to the description stated herein subject to tolerances and variations

consistent with current trade practices, testing and inspections methods. Seller makes no other warranties

hereunder, expressed or implied. Seller specifically disclaims any implied warranties of merchantability or fitness

for a particular purpose.


9/68

Alltec Corporation

64 Catalyst Drive




9. Claims(a) Buyer shall inspect the Goods immediately upon receipt. Any claim that the Goods have been damaged

or otherwise do not conform must be made to Seller in writing within ten (10) days of receipt of such

Goods by Buyer. All claims for defective, damaged, or non-conforming Goods must be submitted in

writing to ALLTEC Corporation at 64 Catalyst Drive, Canton, NC 28716, accompanied with a copy of the

signed bill-of-lading noting the damage/shortages, and any other information (photos, etc) supporting

Buyers claim. In the absence of such notice, the Goods shall be deemed to be accepted by Buyer.

(b) With respect to any valid claims properly submitted hereunder, Buyers exclusive remedy and Sellers

sole liability shall be limited to Seller repairing or replacing Goods that do not conform to specifications,

or at Sellers sole option refunding the purchase price of the Goods. In no event shall Seller have any

liability to damages in connection with the sale of the Goods in an amount exceeding the purchase

price of the Goods sold. Seller shall have no liability for any consequential, special, or indirect damages.

(c) Claims for quantity deviations or unit pricing errors are deemed waived unless submitted in writing

within thirty (30) days of notice of invoice.

10. QuotationsQuotations, based on plans and specifications, are Sellers interpretation of the requirements and include only

the material described and listed on the quotation unless otherwise stated. Quotations will be in writing and

unless otherwise specified will remain in effect for a period of thirty (30) days from issue date. Formal written

purchase orders for work covered by any quotation submitted must be received within forty-five (45) days from

the date of quotation. Prices and inventory classifications are subject to changes without notice, and are those

in effect at the time of shipment.

11. ErrorsALLTEC reserves the right to correct, at any time, any errors and omissions relating to any component or item

upon which a purchase order may be based, including, but not limited to, clerical or stenographic errors or

omissions as may relate to quotations, price, catalog and other materials supplied by ALLTEC, or other terms and

conditions as reasonably determined by Seller.

12. ReturnsGoods may be returned for credit upon request and upon Sellers approval and issuance to Buyer of a customer

return materials authorization form. Any returned items are subject to reasonable restocking charges whichunless otherwise agreed to by Seller, shall be deemed to be twenty-five percent (25%) of the price of the Goods

returned. Any returned items must be in saleable condition, in the original standard packages, and conform to

current catalog descriptions. All returned material is to be shipped to seller freight prepaid.

Unless otherwise stated, these terms and conditions govern the purchase and sale of the Goods. All terms and

conditions, including price, are subject to change without notice as to any Goods not shipped as of the effective

date of such change.


10/68

Alltec Corporation

64 Catalyst Drive




13. CancellationOrders received and accepted by Seller may not be cancelled or changed subsequent to delivery, prior to that

date such orders received and accepted by Seller with the written permission of Seller. Any cancellation or

change shall be subject to applicable charges for labor, material, and other costs actually incurred by Seller.

14. Sellers RemediesIf Buyer cancels this Agreement prior to shipment for any reason, without Sellers consent, Buyer shall pay Seller

for all costs and expenses incurred by Seller, including the cost of all work executed or performed; any special

engineering costs and commitments made by Seller prior to the time of cancellation; and all other incidental

and storage costs incurred prior to resale.

15. Binding NatureThese terms and conditions shall be binding upon the parties hereto, their successors and assignees.

16. AuthorityAny person, employee or agent otherwise acting on behalf of Buyer hereunder shall be deemed to have full

authority to act on behalf of Buyer which Seller may rely on exclusively without further inquiry.

17. Governing LawThis Agreement shall be construed in accordance with and governed by laws of the state of North Carolina.


11/68

i

TABLE OF CONTENTS

Advanced TechnologiesSection 1: Page Number

TERRASTAT CHARGEDISSIPATIONTERMINALS.............. 1-1Introduction ...........................................................................................1-1

Charge Dissipation Principle .................... .................... ................... .1-2

Standard Risk Protection Model .....................................................1-4

Medium Risk Protection Model ......................................................1-5

Elevation Conductors .........................................................................1-6

High Risk Protection Models .................... .................... ................... .1-8

Mounting Hardware ........................................................................ 1-10

TERRASTREAMER EARLYSTREAMEREMISSIONTERMINALS... 1-11

Introduction ........................................................................................ 1-11

Protection Radius .............................................................................. 1-12Models .................................................................................................. 1-13

Mounting Hardware ........................................................................ 1-14

LIGHTNINGPROTECTIONACCESSORIES....................... 1-18

Lightning Strike Counter ................................................................ 1-18

Heavy Duty Mounting BracketsSection 2:

HEAVYDUTYMOUNTINGBRACKETS........................... 2-1

Bracket Assembly .................................................................................2-1

Mounting Brackets ..............................................................................2-2

Traditional Lightning ProtectionSection 3:

LIGHTNINGPROTECTIONCONDUCTORS........................ 3-1

Class I & II Conductors ........................................................................3-1

AIRTERMINALS..................................................... 3-2

Class I & II Points ...................................................................................3-2Concealed Air Terminal Assembly........................... ................... ....3-3

Tree Points .................. .................... ................... .................... .................3-4

Air Terminal Bases ................................................................................3-5

Point Adapters ......................................................................................3-8

Air Terminal Brace ................................................................................3-9


12/68

ii

CONNECTORS& FITTINGS....................................... 3-10

Splicers, Bonding Plates & Lugs ................................................... 3-10

Clamp & Strap .................................................................................... 3-13

Connectors .......................................................................................... 3-14

FASTENERS& HARDWARE...................................... 3-15Fasteners & Clips ............................................................................... 3-15

Anchor, Nail & Adhesive ................... .................... .................... ....... 3-16

Bolts, Screws & Nuts ......................................................................... 3-17

Washers, Screws & Threaded Rods ................... .................... ....... 3-19

PARTNUMBERINDEX


13/68

1

Advanced Technologies


14/68


15/68

Section 1.1Charge Dissipation Terminals

1-1Lightning Protectionwww.allteccorp.com

Introduction

TerraStat

Charge Dissipation Terminals

IntroductionTerraStat is the latest design in lightning dissipation technology. Science and experience show that TerraStat

Charge Dissipation Terminals, and the structures on which they are installed, are much less likely to sustain a

direct lightning strike than unprotected structures or structures with traditional lightning protection systems.

ALLTECs clients appreciate that these terminals may be installed under the auspices of UL 96A Master Label

lightning protection systems; thus, in the exceptional event of a lightning strike terminating on a CDT (Charge

Dissipation Terminals), the system meets or exceeds the protection provided by a traditional air terminal.

Whatever your requirements, we have a product to fit the application. For those special applications, we have the

capability to design and manufacture a custom system to fit your needs. TerraStat Charge Dissipation Terminals

securely contribute to ALLTECs Protection Pyramid methodology for comprehensive facility protection.

Features

High grade stainless steel construction

Lightweight and easy to install

Corrosion resistant

Low wind loading

Large selection of mounting hardware

UL Listed and recommended as per API 2003

Independently tested

Applications

TS-100*

Standard Risk Protection

Office buildings, shelters, industrial facilities,

homes, and warehouses TS-400*

Medium Risk Protection

Monopoles, high mast lighting, and externally

mounted cameras

TS-500( Vertically Mounted)

High Risk Protection

Communication towers, bridges, petro-chemical

storage facilities, and stacks

TS-510(Horizontally Mounted)

High Risk Protection

Communication towers, bridges, petro-chemical

storage facilities, and stacks

*


16/68

Section 1.1 Charge Dissipation Terminalsd

d

h

l

i

1-2 Lightning Protection www.allteccorp.com

Charge Dissipation Princip

Charge Dissipation PrincipleCharge Dissipation, or Charge Redistribution

Technology uses the point discharge principle

to facilitate the dissipation, or the reduction, of a

buildup of static electrical charges. This technology

has primarily been applied to the electronics and

manufacturing industries to control the buildup

of static charges that can interfere with or damage

sensitive electronic components, and it has been

widely accepted and used with great success. The sole

purpose of static dissipation products is to reduce

the accumulation of electrical charges and thereby

prevent an electrical arc or an electrical current flow

that can cause damage.

This same technology has been successfully applied

to the lightning protection industry by developing

a product line that can be mounted on structures

to reduce the accumulation of ground charge. This

is accomplished by ionizing surrounding air and

neutralizing accumulated charges on the earths

surface, including the grounding system.

When a pointed, grounded conductor is placed in

a high electric field (such as on a structure located

in a thunderstorm) voltage effects at the point are

increased greatly. Electrons from atmospheric atomsand molecules are stripped away and flow to ground

through the grounded conductor, leaving behind

positive atmospheric ions around the point. This

process is commonly referred to as the corona effect.

This corona process begins long before charge

accumulation reaches a critical level when step

leaders begin forming in a storm cloud. The result is

an accumulation of ions around the point. Since like

charges repel from each other, this accumulation of

ions disperse (or dissipate) in all directions away from

the point. Electrons left behind from this dissipation ofions flow to ground and neutralize the positive charges

accumulated on the ground and on the structure. This

is an ongoing process as the thunderstorm builds and

passes over a facility.

A single point, such as on a lightning rod, or as occurs

on a corner of a tower or structure, will reach a point

of saturation to the extent that it cannot disperse

charge at a fast enough rate to keep up with the

charge accumulation. These areas then become the

points where streamers will form, thereby attracting a

lightning strike to themselves.

When the process is magnified with the addition of

thousands of points in a charge dissipation terminal,

the dissipation of ions is magnified many times over

that of a single sharp point. The resulting effect is

that the ground charges, which develop streamers

attracting a lightning strike, no longer have sufficient

electrical energy supporting them to initiate this

process. Without the formation of an upward streamer,

the downward stepped leaders will look for a better

target.

ALLTEC Corporation has a full array of TerraStat

models to protect all types of structures or facilities.

Our experienced design staff is ready to assist you

with technical support in choosing the correct models

for your specific application. We also offer site survey

and design services to review an entire facility, and can

assist you with providing system designs for a completephysical plant or a campus type environment.


17/68



Charge Dissipation Principle

Progressive Lightning Protection for

an Advancing World

Mission-critical systems, subjected to even properlyterminated lightning strikes, suffer unacceptable

damages from secondary and electro-magnetic

effects. The advancement of electronic technology

over the past several decades demands a constant

innovation in lightning protection technology as

well. ALLTEC Corporation takes pride in the continual

development and improvement of our TerraStat line

of charge dissipation/charge redistribution products.

The old-fashioned lightning rod system may no longer

offer adequate protection to the microprocessor-

controlled world in which we now live. Todaystechnology requires more than just managing the

lightning strike by directing it to earth. It is now

imperative to do whatever is necessary to mitigate the

chances of a direct lightning strike to critical facilities.

ALLTECs TerraStat product line offers the advanced

technology required to protect your sensitive

equipment.

There are many adjectives used to characterize this

advanced technology, but Charge Dissipation or

Charge Redistribution most accurately describes the

technology. To understand how TerraStat productswork, one must first develop an understanding of the

basic processes involved in a thunderstorm and the

development of a lightning strike.

As a thunderstorm builds, a breakdown point

is reached and the cloud begins sending down

charges called stepped leaders through ionized

paths in the atmosphere. Multiple stepped leadersbegin propagating towards the ground in three

dimensions looking for the highest accumulation

of ground charge in the area. These charges move

in steps of approximately 50 meters, stop and look

for the best potential, then move again. These steps

and redirections are what gives lightning its jagged

appearance.

Once these stepped leaders reach within about 10 to

150 meters of the earth, objects on the surface where

the opposite ground charge has accumulated begin to

form upward streamers. The energy from the steppedleaders is actually pulling the charge off objects on the

earths surface in the form of the upward streamers.

At this point, the object on the ground that provides

the highest concentration of charges and the best

formed streamer, becomes the most likely target for

the nearest stepped leader, and completes the path

of the lightning strike. Once this occurs, charge from

other stepped leaders originating from the same

source recede and dump their energy through the

established neutralization path.


18/68


d

h

l

i


Standard Risk Protection M

Numbering System

To order, simply follow the three steps below to specify the type and size of the

unit. The example below, shows how to order the TS-100.

Example: TS-100-C-12-12

TS-100 - C - 12 - 12

(1)Model (2) Type (3) Length (4) Diameter

1. Model: TS-100

2. Type: C = Copper

S = Stainless Steel

A = Aluminum

3. Length: Measured in inches

4. Diameter: 12=1/258=5/8

Standard Models

TS-100-C-12-12 WT 1.0 lbs (0.4 kg) TS-100-A-12-12 WT 0.5 lbs (0.2 kg)



TS-100-A-12-58 WT 1.0 lbs (0.4 kg)

TS-100-S-18-58 WT 1.5 lbs (0.6 kg) TS-100-A-18-58 WT 1.0 lbs (0.4 kg)

TS-100-S-24-58 WT 2.5 lbs (1.1 kg) TS-100-A-24-58 WT 1.0 lbs (0.4 kg)

ALL threads are machined to 1/2 standard.

Other sizes available upon request.

A wide choice of mounting hardware is

available for any application. For further

information, see pg. 1-6 and 1-7. See also

Section 2for the mounting brackets.

Standard Risk Protection Model

TerraStat

TS-100

Designed to replace the traditional air terminal in conventional lightning protection systems, the TS-100

converts a standard lightning rod system into a Charge Lightning Dissipation Terminal System, which mitigates

the chances of a direct lightning strike to any building or structure on which it is installed. The TS-100 assembly

is constructed of high quality stainless steel. The stem section is available in various materials and sizes to be

compatible with all standard lightning protection system components.

4.5" Spiral WoundDissipation Brush with.010 Diameter X 3.75

Length Disspation Wire

AIR TERMINAL 46UN


19/68



Medium Risk Protection Model

Medium Risk Protection Model

TerraStat

TS-400

Using the same features as the TS-100, the TS-400 provides a higher level of charge dissipation. It is constructed

of Stainless Steel or Aluminum and utilizes four stainless steel dissipation brushes attached to a single elevation

conductor for higher dissipation on a single mount. The TS-400 is ideally suited for protecting high mast light poles,

security cameras, SCADA antenna systems, and smaller monopoles and towers used for communications.

Numbering System

To order, simply follow the two steps below to specify the type and

size of the unit. The example below, shows how to order the TS-400.

Example: TS-400-S-18

TS-400 - S - 18

(1) Model (2) Type (3) Length

1. Model: TS-400

2. Type: S = Stainless Steel

A = Aluminum

3. Length: Measured in inches

Standard Models

TS-400-S-18 WT 4.2 lbs (1.9 kg) TS-400-A-18 WT 2.4 lbs (1.0 kg)






ALL threads are machined to 1/2 standard.Other sizes available upon request.

A wide choice of mounting hardware is

available for any application. For further

information, see pg. 1-6 and 1-7. See also

Section 2for the mounting brackets.

4.5 Spiral Wound

Dissipation Brushwith .010 Diameter

X 3.75 Length

Dissipation Wire

All elevation

conductors are

5/8diameter.Elevation conductors

are available in

various lengths.

Standard 1/2 X .75

Threaded Shaft EndFor Standard

Air Terminal

Mounting Base

AIR TERMINAL 46UN


20/68


d

h

l

i


Elevation Conductors


Numbering System

To order, simply follow the steps below to specify the type and size of the unit. The example below shows how

to order the mounting hardware.

Example: TS-400-EC-SRO-48-58

TS-400 - EC - SRO - 48 - 58

(1) TerraStat Model (2) Part name (3) Type (4) Length (5)Diameter

1. TerraStat Model: TS-XXX = TS-100 or TS-400

2. Part name: Elevation conductor

3. Type: SRO = Stainless Steel Round Offset

ARO = Aluminum Round Offset4. Length: Measured in inches NOTE:Other lengths available upon request.

5. Diameter Measured in inches: 5/8

TS-100 & TS-400 Elevation Conductor Models

Round Offset Elevation ConductorsOffsets should not exceed 16.

TS-XXX-EC-SRO-48-58 5/8 diameter, Stainless Steel, 48 Round offsetWT4.50 lbs (2.0 kg)

TS-XXX-EC-SRO-60-58 5/8 diameter, Stainless Steel, 60 Round offsetWT5.39 lbs (2.4 kg)TS-XXX-EC-SRO-72-58 5/8 diameter, Stainless Steel, 72 Round offset

WT6.43 lbs (2.9 kg)

TS-XXX-EC-ARO-48-58 5/8 diameter, Aluminum, 48 Round offsetWT1.31 lbs (0.6 kg)



Standard offset is 8. All shafts are 5/8 diameter,

with threads machined to 1/2 standard.

For weight calculation:

TS-100-EC, add 0.32 lbs (0.15 kg)

TS-400-EC, add 3.1 lbs (1.4 kg)

See alsoSection 2for the mounting brackets.


21/68




Round Offset Elevation Conductors with Mounting Plate

TS-XXX-EC-SRO-48-58-MP 5/8 diameter, Stainless Steel, 48 Round offset

with mounting plates WT5.0 lbs (2.3 kg)TS-XXX-EC-SRO-60-58-MP 5/8 diameter, Stainless Steel, 60 Round offset

with mounting plates WT6.6 lbs (3.0 kg)

TS-XXX-EC-SRO-72-58-MP 5/8 diameter, Stainless Steel, 72 Round offsetwith mounting plates WT7.1 lbs (3.2 kg)

All shafts are 5/8 diameter, with threads

machined to 1/2 standard.

For weight calculation:

TS-100-EC, add 0.32 lbs (0.15 kg)

TS-400-EC, add 3.1 lbs (1.4 kg)


22/68


d

h

l

i


High Risk Protection Mod

High Risk Protection Models

TerraStat

TS-500

ALLTEC Corporations latest development in charge dissipation products utilizes the Point Discharge Principal

for the mitigation of direct lightning strikes to communications and broadcast towers and other tall structures.

The TS-500 is constructed completely of 300 series stainless steel for durability. The lightweight, low wind load

design of the TS-500 facilitates a simple installation without requiring a large amount of valuable real estate for

mounting. The TS-500 can be installed on any type of tower or monopole. WT 8.0 lbs (3.6 kg)

5 Diameter Spiral Wound DissipationBrush with .010 Diameter Stainless

Steel Dissipation Wire

10 Stand Off Brace

Cast Bronze Bonding Lug

36 X 1.5 X .25 Mounting Frame

Custom mounting hardware available

for round member legs or angle legs. For

mounting hardware, pg. 1-10andSection 2.


23/68



High Risk Protection Models

TerraStat

TS-510

The TerraStat TS-510 is the horizontal version of the TerraStat TS-500 and is designed to be mounted

horizontally across the tops of large face section towers, on platforms and antenna arms. The TS-510 can also

be used to protect water tanks, storage tanks, commercial cranes and other structures that have large areas of

horizontal exposed steel. WT 9.0 lbs (4.1 kg)

36 X 1.5 X .25 Mounting Frame

5 Diameter Spiral Wound DissipationBrush with .010 Diameter Stainless SteelDissipation Wire

10 Stand Off Brace

Custom mounting hardware available

for round member legs or angle legs. For

mounting hardware,pg. 1-10andSection 2.


24/68


d

h

l

i


Mounting Hardware

Mounting HardwareOnly for TS-500 & TS-510 models

C ClampBKT-CC Mount to flat stock, or angle iron WT 8.0 oz (226.8 g)

Mounting BracketBKT-FC-24 Stainless Steel, 2 - 4, Mount to flat, or corner angle WT 2.5 lbs (1.1 kg)BKT-FC-46 Stainless Steel, 4 - 6, Mount to flat, or corner angle WT 3.1 lbs (1.4 kg)

BKT-RC-24 Stainless Steel, 2 - 4, Mount to round, or corner angle WT 2.6 lbs (1.2 kg)BKT-RC-46 Stainless Steel, 4 - 6, Mount to round, or corner angle WT 3.3 lbs (1.5 kg)

Refer to Section 2 Heavy Duty Mounting

Brackets for further information on our

bracket systems.


25/68

Section 1.2Early Streamer Emission (ESE) Terminals


Introduction

TerraStreamer

Early Streamer Emission (ESE) Terminals

IntroductionALLTEC Corporation is proud to offer our new line of Early Streamer Emission terminals for structural lightning

protection. The TerraStreamer ESE utilizes advanced streamer generating design elements to provide lightning

protection to facilities that would otherwise be difficult or cost prohibitive to protect by conventional means.

The TerraStreamer ESE Lightning Terminal is an externally mounted, proactive, structural lightning protection

device and is designed to activate itself in the moments directly preceding an imminent direct strike. The

installation of a TerraStreamer ESE Terminal combines the best advantages of two systems: the direct pathto ground of a conventional lightning protection system and state-of-the-art ESE technology employed in the

TerraStreamers physical design.

The TerraStreamer ESE terminal is scientifically designed and rigorously tested to provide exceptional

performance, durability and long service life.

Features

Wide variety of mounting hardware is available

for easy installation

Suitable for use with lightning protection cable

or copper tape

Competitively priced

Available in five models for all applications

Rugged yet aesthetically pleasing construction

Suitable for most environments, including

corrosive atmospheres

Lightweight and low wind loading

Reliable performance in all weather conditions

Tested and certified to internationally accepted

standards

Complete design services available

A Certificate of Protection Radius and Fulfillment

of standards NF C 17-102 and UNE 21 186 for each

model and level

Certificate of Withstood Current

Certificate of Gain in Triggering Time

Alltec has developed the TerraStreamer product according to internationally recognized standards. However, Alltec doesnot make any specific performance guarantees as no lightning protection system can be 100% effective.


26/68

Section 1.2 Early Streamer Emission (ESE) Terminalsd

d

h

l

i


Protection Radius

Protection Radius

The ESE Principle

The principle of operation for ESE terminals is to

create an upward propagating streamer earlier than

conventional air terminals or other objects on the

earth. The TerraStreamer does this by collecting and

storing ground charge during the initial phase of a

thunderstorm development.

Once a thunderstorm begins creating downward

step leaders, the ambient electric field intensity in the

area of the ESE terminal increases. When this electric

field intensifies, it triggers the terminal to release the

stored ground charge, forming an upward streamermicroseconds earlier than other objects in the

immediate area.

This development of an upward streamer earlier

in time and space ensures that the TerraStreamer

ESE terminal should be the target of the developing

lightning strike. The selection of the TerraStreamer

model, placement, and mounting height above the

protected area all factor into formulas calculating the

dimensions of the protection area.

TerraStreamer

Upward Streamer

RpH

PROTECTIONAREAS

H(m)TSP 20

(Rp)

TSP 30

(Rp)

TSP 40

(Rp)

TSP 50

(Rp)

TSP 60

(Rp)

Level I

2 15 20 25 30 32

3 23 29 37 45 48

4 31 40 50 59 65

5 39 50 62 73 80

6 40 50 62 74 80

8 40 51 63 74 80

10 41 51 63 74 80

Level II

2 18 23 28 33 38

3 26 34 42 49 55

4 36 46 55 64 74

5 45 58 69 80 89

6 47 58 69 80 90

8 47 59 70 81 90

10 48 60 71 81 91

Level III

2 21 26 32 37 42

3 31 39 48 54 62

4 42 52 63 73 82

5 54 66 80 92 99

6 54 66 80 92 99

8 56 68 81 93 100

10 57 69 82 94 100

Level IV

2 24 29 36 41 45

3 35 43 52 60 65

4 49 59 71 80 87

5 61 74 88 101 108

6 62 74 89 102 108

8 63 76 90 103 109

10 65 77 91 104 110

The standard protection radius RPof the TerraStreamer

is linked (according to NF C 17-102 standard) to T, to

the protection levels I, II, III, or IV and to the height of

the TerraStreamer above the protected structure (H,

defined by NF C-102 as a minimum of 2 m). The NF

C-102 standard includes four levels of protection.

Additional Levels

Level 1+: Structure with a roof protected by an ESE

air terminal. The whole constituted by ESE, downconductors(s) and earthing system(s), is connected

to continuous metal framework or in concrete of the

structure which are used as additional natural down

conductors.

Level 1 ++: Structure with roof protected by ESE

level 1+ with protection radius reduction by 40% and

ensuring a complete protection from the materials on

the roof against direct lightning.


27/68



Models

Models

TerraStreamerEARLYSTREAMEREMISSIONTERMINALS

TSP-20 / TSP-30 / TSP-40 / TSP-50 / TSP-60

Triggering Time Test Results

The triggering time T (s) is defined as the gain at

the sparkover instant obtained with a TSP terminal

compared with a simple rod terminal exposed to the

same conditions. According to NF C 17-102:

The triggering time instance gain T is associated

with a triggering time distance gain L.

L = V. T where:

L (m): gain in lead distance of the sparkoverdistance.

V (m/s): the average speed of the downward tracer

(1.23 m/s).

T (s) : gain in sparkover time of the upward leader.

TRIGGERINGTIME TEST RESULTS

Model Advance

Time

Gain in

Lead Distance

TSP-20 22 s 27.1 m

TSP-30 32 s 39.4 m

TSP-40 44 s 54.1 m

TSP-50 55 s 67.7 m

TSP-60 61 s 75.0 m

All figures derived from independent testing as per

NF C 17-102 specifications under strict laboratoryconditions, associated to results.

TSP terminal WT 3.38 lbs (1.53 kg)

Adaptor WT 1.5 lbs (0.68 kg)


28/68


d

h

l

i


Mounting Hardware

Mounting Hardware

Masts

Stainless Steel Mast2 x 1.09 Wall SS Tube

TSEM-2-5 5 (1.5 m) Length WT 12.5 lbs (5.7 kg)TSEM-2-10 10 (3.0 m) Length WT 25.0 lbs (11.3 kg)TSEM-2-15 15 (4.6 m) Length WT 37.5 lbs (17.0 kg)TSEM-2-20 20 (6.1 m) Length WT 50.0 lbs (22.7 kg)1-1/2 x 1.09 Wall SS Tube

TSEM-1.5-5 5 (1.5 m) Length WT 11.0 lbs (5.0 kg)TSEM-1.5-10 10 (3.0 m) Length WT 22.0 lbs (10.0 kg)TSEM-1.5-15 15 (4.6 m) Length WT 33.0 lbs (15.0 kg)TSEM-1.5-20 20 (6.1 m) Length WT 44.0 lbs (20.0 kg)

MastsTSE-FRP-A FRP Mast Top Section, 7.7 (2.3 m) height WT 11.6 lbs (5.25 kg)

TSE-FRP-B FRP Mast Middle Section, 7.7 (2.3 m) height WT 11.0 lbs (5.02 kg)

TSE-FRP-C FRP Mast Bottom Section, 7.7 (2.3 m) height WT 15.0 lbs (6.82 kg)


29/68



Mounting Hardware

Aluminum Mast BaseTSE-FRP-MST 18L X 18W X 60H WT 23.5 lbs (10.66 kg)

FRP Mast Accessories

The following items are not available

separately.

Collar 2 inch HeighTSE-FRP-2-CLR 2 (5 cm) height, 1.96 (50 mm) O.D. & 1.61 (41 mm) I.D.

WT 6.34 oz (180 g)

Nipple 22 inch HeightTSE-FRP-22-NIP 22 (56 cm) height, 1.96 (50 mm) O.D. & 1.61 (41 mm) I.D.

WT 2.20 lbs (1.0 kg)

Coupler 24 inch HeightTSE-FRP-24-CPLR 24 (60 cm) height, 1.96 (50 mm) O.D. & 1.61 (41 mm) I.D.

WT 2.65 lbs (1.2 kg)

Addtional SleeveTSE-FRP-36-SLV 36(91 cm) height, 1.96 (50 mm) O.D. & 1.61 (41 mm) I.D.

WT 3.97 lbs (1.8 kg)

AdhesiveTSE-FRP-RESIN Instant Adhesive, Resin Tube WT17.6 oz (500 g)

Refer to Section 2 Heavy Duty Mounting

Brackets for further information on our

bracket systems.


30/68


d

h

l

i


Mounting Hardware

FRP Anchors

AnchorTSE-FRP-ANC-G Guy Wire Anchor, plate size: 4 X 4, thickness:

.24 (6 mm), Circle Dia: 1.57 (40 mm)

WT 8.8 oz (0.25 kg)

GI Anchor PlateTSE-GI-ANC-P 4 X 4 X .250 (102 X 102 X 6.35 mm) with

Stainless Steel hook having four corner holes

of 3/8 I.D. WT 22 oz (0.62 kg)

Fastening Cable

Guy Wire CableTSE-GUY-CABLE 3/16 stainless steel wire, 77 lbs per 1,000.

WT 5.5 oz (160.0 g)(per ft.)

Fastening Cable Kit

Guy Cable KitTSE-GUY-KIT Kit contains 150 of cable, 9 Turnbuckles, 9 D Clamps, 36 U Clamps, 18 AF Sleeves,

and 3 Anchor Plates for securing a 9 ft (2.74 m) mast WT 62.5 lbs (28.4 kg)

TSE-GUY-KIT-20 Kit contains 75 of cable, 3 Turnbuckles, 3 D Clamps, 12 U Clamps, 6 AF Sleeves,and 3 Anchor Plates for securing a 20 ft (6.1 m) mast WT 33.1 lbs (15.0 kg)



Cable Turnbuckle D Clamp

U Clamp Anti Fray sleeve Anchor Plate


31/68



Mounting Hardware

Guy Wire Accessories

Turnbuckle ClampTSE-GUY-TB-CLAMP Stainless Steel WT 3.5 oz (100 g)

D ClampTSE-GUY-D-CLAMP Stainless Steel WT 1.4 oz (40 g)

U ClampTSE-GUY-U-CLAMP Stainless Steel WT 0.7 oz (20 g)

Mount Base

Non Penetrating Ballast Mount BaseTSE-NP-BASE 36L X 36 W X 48H WT 30.0 lbs (13.6 kg)

This base requires eight blocks for weighting

down the base.


32/68

Section 1.3 Lightning Protection Accessoriesd

d

h

l

i


Lightning Strike Counte

Lightning Protection Accessories

Lightning Strike Counter

LSC-6D

The counter displays the number of lightning strikes that have hit a system. The counter is for use on tower legs

or other down conductors such as cables. It connects to two points on the conductor, spaced at least 8 feet

apart, using 14 AWG (25 mm2) insulated wire. Features include weather proof enclosure, internal protection,

and six digit readout. Mounts to any flat surface. The Strike Counter LSC-6D is for outdoor use. WT 5 oz (141.75 g)

CO

NNEC

TIO

NT

ER

MIN

ALS LS

C-6D

LIGHTNIN

G

STRIKE

COUNTE

R

Made

intheU

SA

ww

w.all

tecc

orp.

com

0 20 0 00

1.62 in.

[41.2 mm]1.19 in.[30.1 mm]

6.19 in.

[157.2 mm]

1.06 in.

[27.0 mm]

2.13 in.[54.0 mm]

1.00 in.

[25.4 mm]

7.07 in.

[179.6 mm]

5.50 in.

[139.7 mm]

3.57 in.

[90.7 mm]


33/68

2

Heavy Duty Mounting Brackets


34/68


35/68

Section 2.1Heavy Duty Mounting Brackets


Bracket Assembly

Heavy Duty Mounting Brackets

Made completely of high quality 1/4 thick heavy duty 304 stainless steel for copper systems, with aluminum

adaptors for aluminum systems, the modular construction of this mounting hardware system offers incrediblestrength, flexibility and utility for a wide variety of applications.

Bracket AssemblySelecting the appropriate Heavy Duty Mounting Brackets and Hardware for your application is easy!

Remember, two BKT assemblies- typically spaced twelve inches apart, are needed to provide support for

TerrasStat air terminals. To accommodate for angled or tapered mounting, order the adjustable BKT-AT series

or calculate two extension lengths to create almost any non-parallel mount slant.

12

< For Typical Mounting >

BKT-EX Series

Example of use: 4 Extented Brackets

BKT-AT Series may be easily adjusted for Angled

or Tapered Mounting. For details, refer topg. 2-2

and2-3.


36/68

Section 2.1 Heavy Duty Mounting Brackets

i

k


Mounting Brackets

Mounting Brackets

Numbering System

To create a part numbering supply information, format as follows: BKT-T-S-E-L-B (See chart on for detail.)

To Order, simply follow the five steps below to specify the type and size of the brackets.

Example: BKT-RF-24-EX-R-4-STH

BKT - RF - 24 - EX-R - 4 - STH

(1) Type (2) Size (3) Extension (4) Extension Length (5) Bracket Attachment

1. Type: T - First, Determine the Type (shape) of the pole, mast or tower leg to which

attachment is to be made:

RR = Round

FF = Square/Rectangular

RF = Corner Angle

2. Size: S- Indicate Clamp Size required (Dimension A):

24 = 2 - 4

46 = 4 - 6

68 = 6 - 8

810= 8 - 103. Extension: E- Indicate Bracket/All-Thread Extension - EX-Series or AT-Series

EX-R = Round Bracket Extension

EX-F = Flat Bracket Extension

AT = All-Thread Extension

4. Extension Length: L- Select Extension Length L

4 = 4

6 = 6

8 = 8

10 = 10

12 = 12

5. Bracket Attachment: B- Select Bracket Attachment Type:Uxx = U-Bolt

(xx = Overall Diameter of rod, pipe, etc i.e. U10 = 1, U20 = 2)

SH = Stainless Steel Thru-Hole Adaptor Block

AH = Aluminum Thru-Hole Adaptor Block

STH = Stainless Steel Threaded Adaptor Base

ATH = Aluminum Threaded Adaptor Base


37/68



Mounting Brackets

How to Create Your Bracket Set

RR FF RF

ATSeries

EXSeries

RRSeries FFSeries RFSeries

-TType

-EExtension

-BBracket

Attachment

-SSize

-LExtension

Length

DIM A DIM A

DIM A

EX-R

EX-R

EX-F

EX-F

L

L

Uxx

Uxx

STH, ATH

SH, AH

BKT-T-S-E-L-B


38/68

Section 2.1 Heavy Duty Mounting Brackets

i

k


Mounting Brackets

Bracket Set

Qty 1- BKT-RR-24-EX-R-4-SH plus Qty 1- BKT-RR-24-EX-R-4-STH, creates a Heavy Duty Mounting Bracket set

for use on a 2-4 round pole, with a 4 offset extension for a TerraStat Charge Dissipation Air Terminal.

Weight ChartThis chart shows the weight of the bracket set including the bolts, nuts, and washers.

Clamp

Diameter

A

Type

Extension Length L

0 4 6 8 10 12

lbs kg lbs kg lbs kg lbs kg lbs kg lbs kg

2 - 4EX 1.13 0.51 1.41 0.64 1.55 0.70 1.69 0.77 1.83 0.83 1.98 0.90

AT 1.13 0.51 1.25 0.57 1.31 0.59 1.38 0.63 1.44 0.65 1.50 0.68

4 - 6EX 1.41 0.64 1.69 0.77 1.84 0.83 1.98 0.90 2.12 0.96 2.26 1.03

AT 1.41 0.64 1.54 0.77 1.60 0.73 1.66 0.75 1.72 0.78 1.82 083

6 - 8EX 1.69 0.77 1.97 0.89 2.12 0.96 2.26 1.03 2.40 1.09 2.54 1.15

AT 1.69 0.77 1.82 0.83 1.88 0.85 1.94 0.88 2.00 0.91 2.06 0.93

8 - 10EX 1.98 0.90 2.26 1.03 2.40 1.11 2.55 1.16 2.69 1.22 2.83 1.28

AT 1.98 0.90 2.11 0.96 2.17 0.98 2.23 1.01 2.29 1.04 2.36 1.03


39/68



Mounting Brackets

Mounting Brackets

Heavy Duty Universal Wall Mount BracketTSE-WM-BKT Stainless Steel WT 3.0 lbs (1.4 kg)

Round Member Mounting BracketBKT-RU-12 1 - 2 I.D. WT 1.6 lbs (0.7 kg)BKT-RU-24 2 - 4 I.D. WT 2.7 lbs (1.2 kg)BKT-RU-46 4 - 6 I.D. WT 4.8 lbs (2.2 kg)

Flat Member Mounting BracketBKT-FU-12 1 - 2 I.D. WT 1.6 lbs (0.7 kg)

BKT-FU-24 2 - 4 I.D. WT 2.7 lbs (1.2 kg)BKT-FU-46 4 - 6 I.D. WT 4.8 lbs (2.2 kg)

Flat Wall Corner BracketStandard Length: 18

BKT-FU-1 with 1 I.D. U-bolt WT 4.5 lbs (2.0 kg)BKT-FU-2 with 2 I.D. U-bolt WT 5.0 lbs (2.3 kg)

Pipe Mount Bracket - VerticalBKT-RR-24-DV Fits Pipes up to 4 O.D.

Brackets are welded at the center point.

WT 3.4 lbs (1.5 kg)

Pipe Mount Bracket - Horizontal

BKT-RR-24-DVH Fits Pipes up to 4 O.D.Brackets are welded at the center point.

WT 3.4 lbs (1.5 kg)


40/68

Section 2.1

i

k


NOTE


41/68

3

Traditional Lightning Protection


42/68


43/68

Section 3.1Lightning Protection Conductors


Class I & II Conductors

Lightning Protection Conductors

Class I & II Conductors

32S32 Strand 17 Gauge Class I Copper Cable

Approximate weight per 1,000 feet 215 pounds (97.5 kg/304.8 m).

Diameter 15/32; No. 2 size; 65,600 circular mils.

32L32 Strand 17 Gauge Class I Lead Coated Copper Cable


Diameter 15/32; No. 2 size; 65,600 circular mils.

Lead coated copper conductor cable is used on chimneys and other locations

where resistance to corrosion is necessary.

2214 Strand 17 Gauge Miniature Copper Cable


Diameter 1/4; No.6 size; 28,500 circular mils.

4028 Strand of .066 dia. Class II Copper Cable


Diameter 1/2; No. 1/0 size; 122,000 circular mils.

40L28 Strand of .066 dia. Class II Lead Coated Copper Cable


Diameter 1/2; No. 1/0 size; 122,000 circular mils.Lead coated copper conductor cable is used on chimneys and other locations

where resistance to corrosion is necessary.

A2828 Strand 14 Gauge Class I Aluminum Cable


Diameter 5/8; No.1/0 size; 115,080 circular mils.

A3037 Strand of .0756 dia. Class II Aluminum Cable


Diameter 9/16; No.4/0 size; 211,600 circular mils.

AG410 Strand 14 Gauge Miniature Aluminum Cable

Approximate weight per 1,000 feet 39 pounds. (17.7 kg/304.8m)

Diameter 5/16; Size No. 4; 43,000 circular mils.

C-STNDThis stand is made of steel yet is light, sturdy and durable. The stand is a big

assist for small and large jobs as cable is unwound from the spool.

WT 8.0 lbs (4.0 kg)


44/68

Section 3.2 Air Terminals

Traditional


Class I & II Points

Air Terminals

Class I & II PointsAll Air Terminals in this section meet or exceed the material specifications and requirements of Underwriters

Laboratories, Inc., (UL) and the Lightning Protection Institute (LPI). All 5/8 Air Terminals are machined to 1/2

Threads Standard.

AIR TERMINAL 46UN

1012 3/8 X 12 Solid copper point WT 6.8 oz (0.19 kg)1016 3/8 X 16 Solid copper point WT 9.2 oz (0.26 kg)1018 3/8 X 18 Solid copper point WT 10.3 oz (0.29 kg)1024 3/8 X 24 Solid copper point WT 13.8 oz (0.39 kg)1036 3/8 X 36 Solid copper point WT 1.31 lbs (0.59 kg)1048 3/8 X 48 Solid copper point WT 1.71 lbs (0.77 kg)

1112 1/2 X 12 Solid copper point WT 12.1 oz (0.34 kg)1116 1/2 X 16 Solid copper point WT 1.02 lbs (0.46 kg)1118 1/2 X 18 Solid copper point WT 1.08 lbs (0.48 kg)1124 1/2 X 24 Solid copper point WT 1.54 lbs (0.69 kg)1136 1/2 X 36 Solid copper point WT 2.31 lbs (1.04 kg)1148 1/2 X 48 Solid copper point WT 3.06 lbs (1.38 kg)

1212 5/8 X 12 Solid copper point WT 1.18 lbs (0.53 kg)1216 5/8 X 16 Solid copper point WT 1.58 lbs (0.71 kg)1218 5/8 X 18 Solid copper point WT 1.78 lbs (0.80 kg)1224 5/8 X 24 Solid copper point WT 2.37 lbs (1.07 kg)1236 5/8 X 36 Solid copper point WT 3.56 lbs (1.61 kg)

1248 5/8 X 48 Solid copper point WT 4.75 lbs (2.15 kg)

1112A 1/2 X 12 Solid aluminum point WT 3.6 oz (0.10 kg)1116A 1/2 X 16 Solid aluminum point WT 4.9 oz (0.14 kg)1118A 1/2 X 18 Solid aluminum point WT 5.6 oz (0.16 kg)1124A 1/2 X 24 Solid aluminum point WT 7.1 oz (0.20 kg)1136A 1/2 X 36 Solid aluminum point WT 10.8 oz (0.30 kg)1148A 1/2 X 48 Solid aluminum point WT 14.2 oz (0.40 kg)

1212A 5/8 X 12 Solid aluminum point WT 5.6 oz (0.16 kg)1216A 5/8 X 16 Solid aluminum point WT 7.1 oz (0.20 kg)1218A 5/8 X 18 Solid aluminum point WT 8.6 oz (0.24 kg)

1224A 5/8 X 24 Solid aluminum point WT 11.0 oz (0.31 kg)1236A 5/8 X 36 Solid aluminum point WT 1.03 lbs (0.46 kg)1248A 5/8 X 48 Solid aluminum point WT 1.37 lbs (0.63 kg)

1218S 5/8 X 18 Solid stainless steel point WT 1.5 lbs (0.68 kg)1224S 5/8 X 24 Solid stainless steel point WT 2.0 lbs (0.90 kg)1236S 5/8 X 36 Solid stainless steel point WT 3.0 lbs (1.36 kg)1248S 5/8 X 48 Solid stainless steel point WT 4.0 lbs (1.81 kg)

Please add suffix letter; B

to part number for Blunt

Tips, T to part number for

Tin Plating, and L to part

number for Lead coating.


45/68

Section 3.2Air Terminals


oncealed Air Terminal Assembly

Concealed Air Terminal Assembly

Cast Flare End Air Terminal1520 3/8 I.D. cast flare end air terminal WT 6.9 oz (198.0 g)1521 1/2 I.D. cast flare end air terminal WT 7.5 oz (212.0 g)1521A 1/2 I.D. aluminum flare end air terminal WT 2.5 oz (72.0 g)

Concealed Air Terminal Assembly

AIR TERMINAL 46UN

1532 3/8 x 12 solid copper stem WT 16.2 oz (459.3 kg)1538 3/8 x 18 solid copper stem WT 18.25 oz (157.4 g)1542 1/2 x 12 solid copper stem WT22.6 oz (640.7 g)1548 1/2 x 18 solid copper stem WT 29.2 oz (827.9 kg)1542A 1/2 x 12 solid aluminum stem WT 7.4 oz (209.8 g)

1548A 1/2 x 18 solid aluminum stem WT 9.2 oz (260.8 g)

Nail BracketVertical support for concealed air terminal base.

1533 3/8 I.D. copper nail bracket WT 6.3 oz (178.6 g)1535 1/2 I.D. copper nail bracket WT 6.6 oz (187.1 g)1535A 1/2 I.D. aluminum nail bracket WT 4.1 oz (116.2 g)

Mechanical Cable ConnectorMechanical cable connector for concealed air terminal base.

1534 3/8 I.D. copper mechanical cable connector WT 3.2 oz (90.7 g)1536 1/2 I.D. copper mechanical cable connector WT 3.6 oz (102.1 g)

1536A 1/2 I.D. aluminum mechanical cable connector WT 2.1 oz (59.5 g)


46/68


Traditional


Tree Points

Tree Points

Miniature Tree Point1602 4 Bronze tree point for miniature cable to protect trees.

WT 5.5 oz (155.9 g)

Standard Tree Point1604 4 Bronze tree point for standard cable to protect trees.

WT 5.8 oz (164.4 g)

Seepg. 3-15for appropriate Tree Drive Cable

Fastener.


47/68



Air Terminal Bases

Air Terminal Bases

Adhesive Air Terminal BaseUsed for mounting on membrane or built-up roofs. Mounted with adhesive or

plastic roofing cement. The cast base has a mechanical conductor connector.

2003 Cast bronze base with 3/8 I.D. threads WT 13.9 oz (394.1 g)2005 Cast bronze base with 1/2 I.D. threads WT 14.8 oz (419.6 g)2007 Cast bronze base with 5/8 O.D. threads WT 15.8 oz (447.9 g)2005A Cast aluminum base with 1/2 I.D. threads WT 4.7 oz (133.2 g)2007A Cast aluminum base with 5/8 I.D. threads WT 4.8 oz (136.1 g)

Universal Surface BaseUsed for mounting on a flat surface or against the inside of vertical walls. Can

be mounted with adhesive or fasteners.2013 Cast bronze base with 3/8 I.D. threads WT 13.1 oz (371.4 g)2015 Cast bronze base with 1/2 I.D. threads WT 10.9 oz (309.0 g)2015A Cast aluminum base with 1/2 I.D. threads WT 4.2 oz (119.1 g)

Offset Parapet Air Terminal BaseUsed for vertical mounting against the inside parapet wall. Base has a 1-1/2

offset to clear coping on parapet wall.

2033 Offset cast bronze base with 3/8 I.D. threadsWT 13 oz (36.85 g)

2035 Offset cast bronze base with 1/2 I.D. threadsWT 12.8 oz (362.9 g)

2037 Offset cast bronze base with 5/8 I.D. threadsWT 13.1 oz (371.4 g)

2035A Offset cast aluminum base with 1/2 I.D. threadsWT 4.3 oz (121.9 g)

2037A Offset cast aluminum base with 5/8 I.D. threadsWT 4.1 oz (116.2 g)

Standard Ridge BaseAllows for easy fitting along a roof ridge. The standard base has a 5/8 O.D.

thread for air terminal fastening and mechanical conductor connector.

2100 Standard copper ridge base WT 11.7 oz (331.7 g)

2100A Standard aluminum ridge base WT 5.9 oz (167.39 g)


48/68


Traditional


Air Terminal Bases

Adjustable Ridge BaseA swivel neck allows mounting on any roof pitch while keeping the air

terminal level. The base has a mechanical conductor connector.

2126 Cast bronze ridge base 3/8 I.D. threads and 5/8 O.D. threadsWT 1.14 lbs (517.1 g)

2126A Aluminum ridge base 5/8 O.D. threads WT 6.5 oz (184.3 g)

Standing Seam BaseThis cast base for standing seam roof has a 3/4 groove to fit over most seams.

Provided with a swivel adapter for leveling points. Cable holder is adjustable

so cables can run parallel or perpendicular. Two set screws secure base to

seam.

2128 Bronze standing seam base 3/8 I.D. threads WT 1 lbs (453.6 g)2129 Bronze standing seam base 1/2 I.D. threads WT 1.1 lbs (498.9 g)2129A Aluminum standing seam base 1/2 I.D. threads WT 9 oz (255.1 g)

Horizontal Air Terminal Conductor BaseApplicable where placing air terminals on grounded or pre-bonded horizontal

metal surfaces. The base has an 8 sq. in. contact surface and four holes for

fastening.

2205 Cast bronze base 1/2 I.D. threads WT 7.3 oz (206.9 g)2206 Cast bronze base 5/8 O.D. threads WT 8.1 oz (229.6 g)2205A Aluminum base 1/2 I.D. threads WT 2.3 oz (65.2 g)2206A Aluminum base 5/8 O.D. threads WT 2.3 oz (65.2 g)

Vertical Air Terminal Conductor BaseApplicable where placing air terminals on grounded or pre-bonded vertical

metal surfaces. The base has a 4 sq. in. contact surface and four holes for

fastening.

2215 Cast bronze base with 1/2 I.D. threads WT 5.1 oz (144.6 g)2215A Aluminum base with 1/2 I.D. threads WT 1.4 oz (39.7 g)


49/68



Air Terminal Bases

Horizontal Pipe Air Terminal BaseMay be used with or without conductor run.

2223 2 Cast bronze pipe base with 3/8 I.D. threads WT 12.4 oz (351.5 g)

2225 2 Cast bronze pipe base with 1/2 I.D. threads WT 1.19 lbs (539.8 g)2227 2 Cast bronze pipe base with 5/8 O.D. threads WT 12.4 oz (351.5 g)2225A 2 Cast aluminum pipe base with 1/2 I.D. threads WT 4.4 oz (124.7 g)2227A 2 Cast bronze pipe base with 5/8 O.D. threads WT 4.5 oz (127.6 g)

Vertical Pipe Air Terminal BaseMay be used with or without conductor run.

2223V 1.75 to 2.5 Cast bronze pipe base with 3/8 I.D. threadsWT 12.4 oz (351.5 g)

2225V 1.75 to 2.5 Cast bronze pipe base with 1/2 I.D. threadsWT 1.19 lbs (539.8 g)

2227V 1.75 to 2.5 Cast bronze pipe base with 5/8 O.D. threadsWT 12.4 oz (351.5 g)

2225AV 1.75 to 2.5 Cast aluminum pipe base with 1/2 I.D. threadsWT 4.4 oz (124.7 g)

2227AV 1.75 to 2.5 Cast aluminum pipe base with 5/8 O.D. threadsWT 4.5 oz (127.6 g)

Vertical Air Terminal BaseBase has a mechanical conductor connector that allows both vertical and

horizontal cable runs.

2303 Cast bronze base with 3/8 I.D. threads WT 7.8 oz (221.1 g)

2305 Cast bronze base with 1/2 I.D. threads WT 7.2 oz (204.1 g)2305A Cast aluminum base with 1/2 I.D. threads WT 2.6 oz (73.7 g)

Heavy Duty Terminal BaseA heavy duty base for vertical mounting with multiple applications. The

straight base has two stainless steel set screws for clamping conductor

concentric to the air terminal.

2313 Cast bronze base with 3/8 I.D. threads WT 10.2 oz (289.2 g)2315 Cast bronze base with 1/2 I.D. threads WT 9.1 oz (257.9 g)2315A Cast aluminum base with 1/2 I.D. threads WT 3.2 oz (90.7 g)


50/68


Traditional


Point Adapters

Point Adapters

Adjustable Air Terminal AdapterThe adjustable air terminal adapter adjusts at 180 degree range. Also available

in tin plated.

2401 3/8 I.D. top to 3/8 I.D. cast bronze swivel WT 5.1 oz (144.6 g)2402 1/2 I.D. top to 1/2 O.D. cast bronze swivel WT 5.8 oz (164.0 g)2403 1/2 I.D. top to 1/2 I.D. cast bronze swivel WT 5.6 oz (158.8 g)2404 3/8 I.D. top to 5/8 O.D. cast bronze swivel WT 5.2 oz (147.4 g)2405 1/2 I.D. top to 5/8 O.D. cast bronze swivel WT 5.3 oz (150.3 g)2406 5/8 I.D. top to 5/8 O.D. cast bronze swivel WT 5.3 oz 150.3 g)2407 1/2 I.D. top to 5/8 I.D. cast bronze swivel WT 5.3 oz (150.3 g)2408 3/8 I.D. top to 5/8 I.D. cast bronze swivel WT 5.2 oz (147.4 g)2402A 1/2 I.D. top to 1/2 O.D. cast aluminum swivel WT 2.4 oz (68.0 g)

2403A 1/2 I.D. top to 1/2 I.D. cast aluminum swivel WT 2.6 oz (73.7 g)2405A 1/2 I.D. top to 5/8 O.D. cast aluminum swivel WT 3.1 oz (87.9 g)2406A 5/8 I.D. top to 5/8 O.D. cast aluminum swivel WT 1.9 oz (53.9 g)2407A 1/2 I.D. top to 5/8 I.D. cast aluminum swivel WT 1.9 oz (53.9 g)

Please contact your representative for orders

requiring different configurations and sizes.

Air Terminal Adapter2411 Brass adapter 3/8I.D. to 3/8 I.D. threads WT 2.4 oz (68.0 g)2412 Brass adapter 3/8 I.D. to 1/2 I.D. threads WT 2.0 oz (62.0 g)

2413 Brass adapter 3/8 I.D. to 5/8 I.D. threads WT 2.3 oz (68.0 g)2414 Brass adapter 1/2 I.D. to 1/2 I.D. threads WT 2.2 oz (62.4 g)2415 Brass adapter 1/2 I.D. to 5/8 I.D. threads WT 2.4 oz (68.0 g)2416 Brass adapter 5/8 I.D. to 5/8 I.D. threads WT 1.0 oz (28.3 g)2414A Aluminum adapter 1/2 I.D. to 1/2 I.D. threads WT 2.2 oz (62.4 g)2415A Aluminum adapter 1/2 I.D. to 5/8 I.D. threads WT 1.0 oz (28.3 g)2416A Aluminum adapter 5/8 I.D. to 5/8 I.D. Threads WT 1.0 oz (28.3 g)

Concealed Air Terminal Adapter2423 Cast bronze adapter for 5/8 O.D. and 3/8 I.D. thread at top and

3/8 I.D. thread at the bottom WT 2.5 oz (70.9 g)

2425 Cast bronze adapter for 5/8 O.D. thread at top and 1/2 I.D. threadat the bottom WT 2.2 oz (62.0g)2425A Cast aluminum adapter for 5/8 O.D. thread at top and 1/2 I.D.

thread at the bottom WT 1.0 oz (28.3 g)


51/68



Air Terminal Brace

Air Terminal Brace

Tripod Air Terminal BraceThis mechanical fastened brace is used where conditions require additional

support for long air terminals. The tripod brace is made of 1/4 special

tempered copper or aluminum rod.

2518 18 Copper tripod WT 1.00 lbs (0.45 kg)2524 24 Copper tripod WT 1.50 lbs (0.68 kg)2536 36 Copper tripod WT 2.00 lbs (0.90 kg)2548 48 Copper tripod WT 2.50 lbs (1.1 kg)2618A 18 Aluminum tripod WT 1.00 lbs (0.45 kg)2624A 24 Aluminum tripod WT 1.25 lbs (0.56 kg)2636A 36 Aluminum tripod WT 1.50 lbs (0.68 kg)2648A 48 Aluminum tripod WT 1.75 lbs (0.79 kg)

Adhesive Tripod Air Terminal BraceThe adhesive fastened brace is used where conditions require additional

support for long air terminals without roof penetration. The tripod brace is

made of 1/4 special tempered copper or aluminum rod.

2718 18 Copper tripod WT 1.00 lbs (0.45 kg)

2724 24 Copper tripod WT 1.50 lbs (0.68 kg)2736 36 Copper tripod WT 2.00 lbs (0.90 kg)2748 48 Copper tripod WT 2.50 lbs (1.1 kg)2818A 18 Aluminum tripod WT 1.00 lbs (0.45 kg)2824A 24 Aluminum tripod WT 1.25 lbs (0.56 kg)2836A 36 Aluminum tripod WT 1.50 lbs (0.68 kg)2848A 48 Aluminum tripod WT 1.75 lbs (0.79 kg)


52/68

Section 3.3 Connectors & Fittings

Traditional


Splicers, Bonding Plates & L

Connectors & Fittings

Splicers, Bonding Plates & Lugs

Mechanical Straight Cable SplicerUsed for splicing straight run class I cable through 2/0 conductor sizes.

3002 Cast bronze straight splicer WT 11.3 oz (320.4 g)3002A Cast aluminum straight splicer WT 4.5 oz (127.6 g)

Miniature Straight Cable SplicerTwo set screws are used for mechanical clamping of miniature conductor and

up to #2 solid wire.

3021 Cast bronze miniature straight cable splicer WT 1.9 oz (53.8 g)3021A Cast aluminum miniature straight cable splicer WT 1.0 oz (28.3 g)

Two Bolt Mechanical Conductor SplicerTwo bolt mechanical clamping with 2 inches of contact for any combination

of miniature or full size conductor and wire.

3061 Cast bronze parallel conductor splicer WT 8.0 oz (226.8 g)3061A Cast aluminum parallel conductor splicer WT 4.0 oz (113.4 g)

One Bolt Mechanical Conductor Splicer

Uses a single bolt mechanical clamping with 1 inch of contact for anycombination of miniature or full size conductor and wire.

3071 Cast bronze parallel conductor splicer WT 4.0 oz (113.4 g)3071A Cast aluminum parallel conductor splicer WT 2.0 oz (56.7 g)

Flat Parallel Conductor SplicerUses a single bolt mechanical clamping with 1-1/2 inches of contact for any

combination of standard or full size conductor.

3081 Cast bronze parallel cable splicer WT 7.0 oz (198.4 g)3081A Cast aluminum parallel cable splicer WT 3.0 oz (85.0 g)

Secondary Bonding Cast Parallel Splicer3091 Cast bronze parallel cable splicer with 4 square bonding surface

WT 9.0 oz (225.1 g)

3091A Cast aluminum parallel cable splicer with 4 square bondingsurface WT 4.0 oz (113.4 g)


53/68

Section 3.3Connectors & Fittings


plicers, Bonding Plates & Lugs

Bonding PlateHas an 8 sq. in. contact area for primary bonding and a mechanical clamp

cable connector that can be rotated at 90 degrees.

3101 Cast bronze bonding plate WT 12.0 oz (340.2 g)3101A Cast aluminum bonding plate WT 4.0 oz (113.4 g)

Terminal Bonding LugHas a 4 sq. in. contact area for secondary bonding and a mechanical conductor

connector that can be rotated 90 degrees.

3111 Cast bronze bonding lug for 1/2 bolt WT 8.0 oz (226.8 g)3111A Cast aluminum bonding lug for 1/2 bolt WT 3.0 oz (85.0 g)

Heavy Duty Beam Flange Bonding ConnectorEight (8) sq. in. of bonding surface makes this bonding connector ideal for

bonding to flanges of structural beams, columns and angles and steel purlinsup to 5/8 thickness. Clamp type cable fastener fits all standard cables through

2/0. Requires no drilling, clamps directly to edge of steel.

3121 Bronze heavy duty beam flange bonding connector to fit 3/4 thickmetal flange WT 1.60 lbs (0.73 kg)

3121A Aluminum heavy duty beam flange bonding connector to fit 3/4thick metal flange WT 9.0 oz (255.1 g)

Small Terminal Bonding LugSmall bonding lug with 1/4 bolt hole uses two set screws for mechanical

clamping of miniature cable and wire.

3161 Cast bronze small terminal bonding lug WT 3.6 oz (102.1 g)3161A Cast aluminum small terminal bonding lug WT 1.5 oz (45.5 g)

Flange Bonding ClampAllows bonding to structural steel edges without making penetrations. The

flange bonding clamp uses a mechanical clamp for standard conductor to

steel members up to 5/8 thick.

3181 Cast bronze flange bonding clamp WT 9.0 oz (255.1 g)

3181A Cast aluminum flange bonding clamp WT 4.0 oz (113.4 g)

Mechanical Tee SplicerThe mechanical tee splicer is used for clamping terminating conductor cable

run perpendicular to continuing conductor run.

3201 Cast bronze tee splicer WT 9.5 oz (269.0 g)3201A Cast aluminum tee splicer WT 3.5 oz (99.0 g)


54/68


Traditional


Splicers, Bonding Plates & L

Cross Run ClampThe cross run clamp uses mechanical clamping on standard conductor

sizes.

3231 Cast bronze cross run clamp WT 7.0 oz (198.4 g)3231A Cast aluminum cross run clamp WT 3.0 oz (85.0 g)

Bimetal Bonding PlatePlate is made of a cast aluminum and bronze to allow connections of

copper conductor cables sizes standard through 2/0 to aluminum beam or

other structural aluminum bodies requiring 8 sq. in. of bonding surface. The

bimetal bonding plate is also available with a 4-1/2 sq. in. bonding plate for

applications that require a minimum of 3 sq. in. of bonding surface. Both

bimetal bonding plates use a mechanical clamp for conductors.

3311 Bimetal bonding plate with 4-1/2 sq. in. bonding plateWT 9.0 oz (255.1 g)

3312 Bimetal bonding plate with 8 sq. in. bonding plateWT 10.0 oz (283.5 g)

Bimetal Mechanical Tee SplicerMade of cast aluminum and bronze. Uses a mechanical clamping for standard

through 2/0 conductor sizes.

3321 Bimetal mechanical tee splicer for copper terminating cableconnecting to aluminum through cable. WT 10.0 oz (283.5 g)

3322 Bimetal mechanical tee splicer for aluminum terminating cableconnecting to copper through cable. WT 10.0 oz (283.5 g)

Cast Bimetal Straight Cable SplicerFor making connections between aluminum and copper cables in a straight

line. Two-bolt tension on each cable for making a strong connection. Use with

all main size conductors.

3352 Cast bimetal straight cable splicer with two-bolt, aluminum tocopper bimetal WT 11.3 oz (320.4 g)

Cast Bimetal Cable SplicerFor making connections between aluminum and copper cables. Single bolt

tension caps allow the cable to come from a variety of directions (straight,

parallel, perpendicular). Use with all main size conductors. Eliminates the use

of an additional splicer.

3372 Cast bimetal cable splicer with single bolt, aluminum to copperbimetal WT 1.0 lbs (453.6 g)


55/68

Section 3.3Connectors & Fittings


Clamp & Strap

Clamp & Strap

Pipe Grounding ClampUsed for bonding to water pipe, gas lines and pipe railing.

For use with all standard conductor and bonding wire.

3501 Cast bronze pipe clamp, up to 1-1/4 WT 10.0 oz (283.5 g)3511 Cast bronze pipe clamp, from 1-1/4 to 2-1/4 WT 1.37 lbs (621.4 g)3521 Cast bronze pipe clamp, from 2 to 4-1/2 WT 1.93 lbs (875.4 g)3501A Cast aluminum pipe clamp, up to 1-1/4 WT 4.0 oz (113.4 g)3511A Cast aluminum pipe clamp, from 1-1/4 to 2-1/4 WT 9.0 oz (255.1 g)3521A Cast aluminum pipe clamp, from 2 to 4-1/2 WT 12.0 oz (340.2 g)

Large Pipe Bonding Strap

Has a terminal bonding lug for standard conductor 1-1/4 wide.3531 Copper strap/cast bronze terminal lug to 2 pipe WT 14.0 oz (396.9 g)3541 Copper strap/cast bronze terminal lug to 4 pipe WT 1.12 lbs (508.1 g)3551 Copper strap/cast bronze terminal lug to 6 pipe WT 1.62 lbs (734.8 g)3561 Copper strap/cast bronze terminal lug to 8 pipe WT 2.50 lbs (1.13 kg)3531A Aluminum strap/cast aluminum terminal lug to 2 pipe

WT 6.0 oz (170.1 g)

3541A Aluminum strap/cast aluminum terminal lug to 4 pipeWT 8.0 oz (226.8 g)

3551A Aluminum strap/cast aluminum terminal lug to 6 pipeWT 12.0 oz (340.2 g)

3561A Aluminum strap/cast aluminum terminal lug to 8 pipe

WT 1.12 lbs (0.51 kg)

Please contact your representative for

additional sizes.


56/68


Traditional


Connectors

Connectors

Right Angle Thru-Roof ConnectorConsists of a mechanical conductor connector, a lead seal flashing washer,

1/2 X 8 threaded stem and bronze bottom connector. Fits up to 6 roof

thickness.

3601 Cast bronze thru-roof connector WT 1.43 lbs (648.6 g)3601A Cast aluminum thru-roof connector WT 1.0 lbs (453.6 g)3601B Bimetal thru-roof connector WT 1.26 oz (571.5 g)

Please contact your representative for additional

sizes.

PVC Thru-Roof Conduit ConnectorThe PVC thru-roof conduit connector consists of a cast mechanical roof

conductor connector, a polymer seal washer, a PVC end cap for 1 schedule

40 PVC, and a stainless steel mechanical straight down conductor connector

with a 3 threaded stem.

3621 Thru-roof connector for copper cable connectionWT 15.0 oz (425.2 g)

3621A Thru-roof connector for aluminum cable connectionWT 9.0 oz (255.1 g)

Thru-Wall Connector

The Thru-Wall Conductor has an 18 threaded stem and two adjustable,mechanical conductor connectors.

3651 Copper/Bronze thru-wall connector with 1/2 diameter stemWT 1.50 lbs (680.4 g)

3651A Aluminum thru-wall connector with 1/2 diameter stemWT 10.0 oz (283.5 g)

3651B Bimetal thru-wall connector with 1/2 diameter stainless steel stemWT 1.50 lbs (680.4 g)

Please contact your representative for addtional

sizes.


57/68

Section 3.4Fasteners & Hardware


Fasteners & Clips

Fasteners & Hardware

Fasteners & Clips

Adhesive Flat Cable FastenerUses a crimp over cable fastener. The cable fastener is fastened with a roofing

adhesive or cement to eliminate any penetrations to the membrane.

6101 Copper flat cable fastener WT 1.0 oz (28.3 g)6101A Aluminum flat cable fastener WT 0.5 oz (14.2 g)

Polymer Adhesive Cable FastenerFastened with a roofing adhesive or cement to eliminate any roof penetrations.

The polymer cable fastener uses pressure snap to lock the hoop firmly aroundthe conductor.

6111 Polymer cable fastener for copper WT 0.5 oz (14.2 g)6111A Polymer cable fastener for aluminum WT 0.5 oz (14.2 g)

Standard Cable ClipUsed with a single nail or screw to fasten conductor sizes standard through

2/0.

6121 Standard copper cable clip WT 110 pc/lb (50 pc/kg)6121A Standard aluminum cable clip WT 220 pc/lb (100 pc/kg)

Loop Cable FastenerSize is 5/8 width and supports up to a 1/4 bolt or screw. The loop cable

fastener fits standard through 2/0 conductor.

6131 Copper cable fastener WT 35 pc/lb (16 pc/kg)6131A Aluminum cable fastener WT 110 pc/lb (50 pc/kg)

Tree Drive Cable Fastener6150 Bronze standard cable tree drive fastener WT 1.5 oz (42.5 g)6151 Bronze miniature cable tree drive fastener WT 1.3 oz (36.8 g)

Standing Seam Cable Clip6180 Bronze standing seam clip, 3/4 groove cable holder and1/4 bolt

WT 0.18 lbs (81.6 g)

6180A Aluminum standing seam clip, 3/4 groove cable holder and 1/4bolt WT 0.14 lbs (63.5 g)


58/68

Section 3.4 Fasteners & Hardware

Traditional


Anchor, Nail & Adhesive

Anchor, Nail & Adhesive

Hammer Drive Screw Anchor6207 Stainless steel screw anchor 1/4 x 1 length

WT 1.75 lbs/C (0.79 kg/M)

6208 Stainless steel screw anchor 1/4

allteccorporation_lightningprotectioncatalog

Documents