AlnorSilent - silencers selection software

Quick Instructions – English

Alnor Systemy Wentylacji Sp. z.o.o.

Warszawa, Poland

AlnorSilent

April 2016

Selection list

Product tree

Results Table

Input data Calculation info

Catalogue

window

3D Cad

viewer/exporter

window

Technical and

Tender Report

window

User Interface - Windows

Multi window user interface enables user to see all the

information about product at the same time. Windows

are interactive, changes in one window infulence changes

in other windows at the same time

AlnorSILENT

AlnorSILENTInput data and Calculation

Input data fields for geometry, accoustics and flow. It is not needed

to input all the fields but Volume flow is neccessary for calculation.

Calculation is performed by clicking ‘Calculate’

button or pressing keyboard/Enter. If calculation

is successful results are presented in Results Table

Calculation results are presented in Results

Table where products that best correspond

to input data are presented

1)

2)

3)

Allowed

Input data

range for d1

Selection

mode list

Selection mode list options:

Max selects all szes from minimum to input

Fixed selects only silencers with the same size

Range selects all sizes in range input

Range selection opens two text boxes for input

of min and max value, and selects all silencers

from d1: 400 to 700 mm

AlnorSILENTCalculation info

If some input fields are out of range, Info box shows

red message and disables Calculate Button

All inputs are in range: Info box instructs to refresh Results

Table by clicking Calculate or keyboard/Enter

Allowed input rangeInput

out

of

range

Input fields are OK, message shows that

calculation is successful. Data in Results

Table corresponds to input

Order code Function – Order Code Editor

Order code button opens

Order Code Editor window. Order Code Editor enables

selection of options: Material,

Couplings, Insulation thickness,

Dimensions, e.t.c.

Order Code Editor sets

Order Code for the

selected product in the

Results Table

AlnorSILENT

AlnorSILENTAdding products to the Selection List

Clicking ”+” Button adds selected product from the Results

Table to the Selection List

Selection list

If there are added products in the

selection list – it is not empty, then

Tender and Technical Report

Buttons are enabled

Results Table

AlnorSILENTSaving Project, Exporting 3D Models

Save AS Button saves Project. That means saving

Selection list of products in ProjectName.alps file

Selection list

3D Models

Button “B” Saves Building Information Model – IFC fileButton “DXF” Saves 3D dxf file

AlnorSILENTReporting: 1) Individual technical report

Clicking on product in Results Table

generates individual technical

report for the selected product. In

this case it is two part product:

silencer and NSL couplings.

Therefore two page report is

generated. Report can be saved as

pdf file.

1st page -

silencer

2nd page -

couplings

Project Name

Number of Pieces: Silencers 5, Couplings 2x5

Number of pieces = 10

AlnorSILENTReporting: 2) Group technical report

Technical Button is enabled if Selection List is not empty. Technical

Button generates GROUP TECHNICAL REPORT for all items in the

Selection list. Report is exportable in pdf file.

Selection listGROUP TECHNICAL

REPORT for all

items in Selection

list.

AlnorSILENTReporting: 3) TENDER REPORT

Tender Button is enabled if Selection List is not empty. Tender Button

generates TENDER REPORT for all items in Selection List.

Selection list

Save As pdf

TENDER

REPORT