altm orion multi-station sensor mount features/benefits kinematic mounting system rapid removal and...
TRANSCRIPT
ALTM Orion Multi-Station Sensor Mount
Features/Benefits
Kinematic mounting system• Rapid removal and re-installation of cameras without affecting
boresight accuracy
Adapter Plate System• Any combination of Optech cameras, camera shutter controllers
and IMUs for maximum flexibility, scalability and configuration options
Removable Vibration Dampening System• Tuned for either aircraft or helicopter installations• Quickly and easily detaches for rapid re-deployment of the
sensor bed to alternative platforms, without affecting the system boresight accuracy.
Add capability as required quickly and easily, without the hassles of further mount and aircraft modifications. “Custom” off-the-shelf sensor suites differentiate you from your competitors using scalable, tightly-integrated, peripheral sensor options via Optech’s diverse camera product line.
ALTM Orion 2-Station Mount
• T-7200/4800/MS (1) centered to lidar FOV for small sensor portals
• T-7200/4800/MS (1) + external IMU
• T-7200 (1) + T-MS/4800 (1)
• D-8900 (1) + shutter controller box
ALTM Orion 4-Station Mount
• T-7200(2) + 4800/MS (1) + external IMU
• T-7200 (1) + T-MS/4800 (2) + external IMU
• T-7200/4800/MS (1) + oblique T4800 (1) + external IMU
• D-8900 (2) + shutter controller box (2)
• D-8900 (1) + shutter controller box (1) + 4800/MS (1) + external IMU
• D-8900 (1) + shutter controller box (1) + 4800/MS (2)
• T-7200/4800/MS (2) + oblique T4800 (1)
4 – Station Mount
6 – Station Mount
Oblique forward looking camera
RGB 80 MP
Nadir camera
Oblique rear
looking camera
Multi-Spectra camera
ALTM Orion M-300
Future thermal camera
Rich Detailed 3D Data
Presentation Overview
• Performance Specifications
• Product Configuration and Peripherals(Data storage; Cameras & Mounts; Waveform
Digitizers)
• Workflow(ALTMnav, Optech Lidar Mapping Suite)
• ALTM Orion: High Precision Mapping System Market fitment; Features/Benefits
Complete solutions for mission planning, sensor operation and XYZ point cloud generation (LAS format)
Workflow
• Real-time lidar data display (elevation/intensity/swath extents)• Real-time lidar data stored to LAS; camera thumbnails stored to file for in-air review• Photo frames projected to surface• Multi-camera trigger by fixed geographic position and/or fixed time• Automated digitizer trigger control and monitoring• Layered diagnostics
Spring 2012: All new Optech FMS
• Wide area and corridor• Active and passive sensor planning (dependent and independent)• Independent flight line optimization• Digitizer planning• DEM planning (gap analysis, eye safety violations, etc.)• Camera trigger by geographic fixed position and fixed time• Photo index plots
Optech FMS - Plan
Optech LMS™ – Lidar Mapping Suite
Features/Benefits
• High-efficiency production processing suite• Performance enhancements: parallel, distributed, batch, multi-sensor, multi-mission• Automated lidar rectification• Accuracy analysis: pre/post rectification, relative/absolute,
graphs/plots/rooflines/reports• Coordinate conversion (Blue Marble Geographics)
Primary Software Objectives
• To develop a lidar rectification package that maximizes data accuracy for the entire mission and/or project using available lidar data redundancy
• Software that is fully automated and production-workflow oriented
• Ability to quantify relative and/or absolute accuracies in a variety of reporting formats for the entire mission and/or project
• To leverage the proprietary IP associated with Optech’s optical models for maximum accuracy.
ArcGIS 10.1 Lidar Workshop
Lidar in ArcGIS 10.1
User Expectations
End Users and Decision Makers
• Lidar lives beyond project• Information has to be:
– Simple– Accessible– Timely
Application and data integration is critical
User Expectations: Simple
End Users and Decision Makers
• Single interface• Zoom/Roam/Search• Visualize data• Perform analysis • Discover relevant information
User Expectations: Accessible
End Users and Decision Makers
• Accessible with other data• Imagery• Base Maps• Operational Layers
• Internally within your organizations and online
User Expectations: Timely
End Users and Decision Makers
ArcGIS enables timeliness by• Using server based on-the-fly processing• Automated analysis and geoprocessing • 2D and 3D visualization
The Lidar Workflow
Collect and Integrate
Manage
Visualize and Analyze
Share
