800 377 5597 USA / 800 565 4658 CAN support@altrofl oors.com

www.altro.com

For technical support please call and speak with our Technical Services department.

Designed for possibilities.Made for people.

Altro Lavencia™ LVT product datasheetTraditional, glue-down, commercial grade luxury vinyl planks and tiles

discover altro.com/lavencia

Attractive looks and lasting durability are not the only traits that make Altro Lavencia the premier LVT for commercial applications — Altro Lavencia is now proudly manufactured in the USA!

Available in 46 updated films ranging from classic wood tones, coordinating stones, brights and even modern organic looks, Altro Lavencia is a stylish, low-maintenance option for a host of application areas.

Peak beauty and performance will last through its lifetime, even in areas with consistently heavy traffic, thanks to the commercial-grade UV-cured ceramic reinforced urethane finish and 28 mil wear layer.

Typical applications

Schools, colleges, offices, government buildings, senior living, public housing, apartment communities, retail, dining rooms

Features + benefits (standard range)

• 3mm thick, 28 mil wear layer

• UV-cured, ceramic reinforced finish

• Glue-down installation

• Resists up to 2000psi of indentation

• Easy-to-clean, no finish required

• Square edge construction - means no bevel for dirt to hide in

• FloorScore Certified

• Ortho-phthalate-free

• Made in the USA

• Stocked throughout the USA + Canada

Sizes

• 6” x 48” standard plank

• 9.25” x 59.25” long plank

• 12” x 24” tile

Custom capabilities

Thanks to local manufacturing innovations, we are now able to offer Altro Lavencia in custom options! Four pre-built specifications with varying choices in thickness, wear layer and finish are available if you are looking to use a film print from our standard range.

But, if our standard film prints and pre-built custom ranges do not suit your needs, please let us know! With additional consultation, we may be able to build an LVT program that fits your unique needs.

Custom range 1 3mm thick, 20 mil wear layer, glue-down installation, UV-cured ceramic reinforced finish

Custom range 2 4mm thick, 28 mil wear layer, glue-down installation, UV-cured ceramic reinforced finish

Custom range 3 2.5mm thick, 12 mil wear layer, glue-down installation, UV-cured ceramic reinforced finish

Custom range 4 2mm thick, 7 mil wear layer, glue-down installation, standard PU finish

8,000 square foot minimum order on custom orders.

Warranty terms may vary based on custom specification.

Better together

Smooth flooring from Altro gives you what you want - an economical and attractive look that’s easy to install and maintain. In commercial areas with frequent spillages and hygiene and durability concerns, it’s best to let our robust collection of safety and slip-resistant flooring and wall cladding join the team!

Install smooth flooring in the dining room and public areas. Bring safety flooring and wall protection into the kitchen, bar and restrooms. You will rest easy knowing your patrons will have an exquisite experience while the most dangerous areas in your facility are well equipped to handle the tolls of the day.

Altro Lavencia

variablewidth

variablelength

3.0mmthick

LVTformat

Color Ansel Oak

Pale Persimmon LAV55044 6” x 48” Chateau Nordic LAV13011 9.25” x 59.25”

Tuxedo Bamboo LAV15033 6” x 48” Ansel Oak LAV14044 6” x 48”

Persimmon LAV55077 6” x 48” Farmhouse Heritage LAV66099 6” x 48”

Black Persimmon LAV55055 6” x 48” Tavern Mesquite LAV55088

Birch Grove LAV55011 6” x 48” Hampton Shores LAV99022 6” x 48” Hampton Greige LAV23066 6” x 48”

9.25” x 59.25”

Color Pale Persimmon

Oak Butternut LAV88077

Blonde Oak LAV14033 6” x 48”

Classic Oak LAV14011 6” x 48”

Ash Oak LAV14022 6” x 48”

Farmhouse Smoke LAV13077 6” x 48”

9.25” x 59.25”

Farmhouse Whiskey LAV13066 6” x 48”

Chateau Saddle LAV13033 6” x 48”

Newfound Oak LAV14055 6” x 48”

Soft Bamboo LAV15022 6” x 48”

Chateau Cellar LAV13022

Laurel Oak LAV88011 6” x 48”

6” x 48” Warm Walnut LAV55022 6” x 48”

Color Frontier

Country Hickory LAV88033 6” x 48” Tavern Tobacco LAV99055 6” x 48”

Spalted Cherry LAV88088 6” x 48” Frontier LAV23088 6” x 48”

African Mahogany LAV88044 6” x 48” Vintage Walnut LAV99077

Rich Bamboo LAV15011 6” x 48”

Tavern Bourbon LAV99088 American Walnut LAV88022 6” x 48”9.25” x 59.25”

9.25” x 59.25”

6” x 48”Antique Burled Oak LAV88066

Marmalade LAV44022 6” x 48” Crimson LAV44033 6” x 48” Cobalt LAV44055 6” x 48”

Amber LAV44011 6” x 48” Pear LAV44044 6” x 48” Hammered Steel LAV16011 12” x 24”

Alabaster LAV16033 Sterling LAV16022 Asher LAV16044

Dove LAV17011 6” x 48” Tweed LAV17022 6” x 48”

Rustic Chestnut LAV99033 Malabar Blackwood LAV99066

12” x 24”12” x 24”12” x 24”

9.25” x 59.25” 9.25” x 59.25”

Specifi cations

Type + class ASTM F1700 Solid vinyl tile: Class III, Type B

Thickness and wear layer 3.0mm | .15” thick

Wear layer 28mil | .7mm wear layer, heterogeneous construction

Dimensions 6” x 48” | 9.25” x 59.25” | 12” x 24”

Weight per carton 6” x 48” = 38lbs. | 9.25” x 59.25” = 42.18lbs. | 12” x 24” = 36lbs.

Warranty 20 year commercial, lifetime residential (refers to standard range only)

Static coeffi cient of friction ASTM D2047 .6 dry

Dynamic coeffi cient

of frictionANSI/NFSI B101.3 .22 wet DCOF

Static load limit ASTM F970 2000 psi

Short term and

residual indentationASTM F1914 Pass

Color stabilityLight ASTM F1515

Heat ASTM F1514

Pass

Pass

Dimensional stability ASTM F2199 Pass

Flexibility ASTM F137 Pass

Fire and smoke

performance

CAN/ULC - S102.2

ASTM E648

ASTM E662

Tested

Class I

< 450

Chemical resistance ASTM F925 Tested

VOC emissionsCA 01350

FloorScore

Pass

Certifi ed

Ortho-phthalate content Ortho-phthalate-free

Recycling This product is 100% recyclable

Composition UV-cured, ceramic-reinforced urethane, fi lm print, 100% virgin pvc

Backing PVC

Installation and

maintenance

Altro fl ooring must be installed by a professional fl ooring installer that has attended an Altro

training clinic. Installation procedures available at altrofl oors.com/downloads, training clinic

information at altrofl oors.com/training. Proper care of Altro fl ooring is critical. Please consult our

cleaning procedures available at altrofl oors.com/downloads. Failure to install and/or maintain

correctly could void the warranty.

StainingCertain chemicals may cause staining of vinyl fl ooring. Traffi c stains may be caused by asphalt

and rubber products, like rubber mats. Please conduct stain test before installation.

Altro and Altro Lavencia are all trademarks of Altro Limited. Content was correct at time of creation.

Altro reserves the right to change any detail. Please consult your sales representative for the latest product information.

© Copyright Altro USA 2020

.6

lifetime

product warranty

20year

product warranty

Data below is for our standard range. Specifi cations will change with custom orders.

DCOF.22

LEED factsLEED v4

Altro Lavencia 2Environmental quality

Low emitting materials, fl ooring 1

Environmental quality

Low emitting materials, adhesives 1

Discover more of our sustainability story

and credentials at altro.com/sustainability

This product may help contributeto the following credits

Looking for samples?Order samples 24 hours a day, 7 days a week at www.altro.com/samples

Plank length Amount per carton

6” x 48”18 pieces per carton

36 ft2 per carton

9.25” x 59.25”10 pieces per carton

38.07 ft2 per carton

12” x 24” 18 pieces per carton

36 ft2 per carton

© Copyright Altro 2020

USA 800 377 5597

CANADA 800 565 4658

support@altrofloors.com

www.altro.com

Altro and Altro Lavencia are trademarks of Altro Limited. Content was correct at time of print. Altro reserves the right to change any detail.

Please consult www.altro.com or your local Sales Representative for the latest product information.

Follow us

Discover more online!

Maintenance guide for smooth tile floorsAltro Dolce, Altro Dolce Essentials and Altro Quartz Tile

800 377 5597 USA / 800 565 4658 CANsupport@altrofloors.com

www.altro.com

For technical support please call and speak with our Technical Services department.

Develop a regular cleaning program suited to the usage and traffic of the

area - Heavily trafficked, high visibility areas, or in areas where staining

agents are to be used (salons, labs) your flooring will need to be cleaned

more often. It will also perform better, in these areas, using the preferred

maintenance with finish program and opting to add additional protective

finish coats as needed. Additionally, it is also important to remove rubber

sole scuffs regularly, whether by hand or with mechanical scrubber.

Use recommended cleaning chemicals - Use only preferred cleaning

products. Always follow manufacturer’s instructions including the correct

dilution ratio. Always spot check the suitability of cleaners on floors prior

to initial maintenance. Do not mix two different cleaning liquids together.

Do not use cleaner containing pine oil or phenolic sanitizer.

Remove scuff marks regularly - Scratching, scuffing, and gouging is

a natural occurrence on all floors. It can be reduced with proper and

adequate furniture rests and chair feet, proper maintenance, maintaining

with finish, adequate dirt control and correct color selection.

Protect newly installed floors - All newly laid floor surfaces should be

covered and protected from other trades during construction with a

suitable non-staining, non-taped, protective covering.

Dirt control - A suitable dirt excluder outside all entrances and an

entry mat will help protect flooring. Mats should be regularly cleaned to

maintain their effectiveness.

Color selection - The importance of color selection cannot be overstated.

Careful consideration must be given before choosing a color.

• Light colors will show more dirt and sole scuffs.

• Dark colors will show more scratching and abrasion.

• Medium tones are best in high traffic areas.

• Maintain light and dark colors using the preferred maintenance with

finish protocols.

Some materials are known to cause staining on vinyl floors. Typical examples include:

• Asphalt and bitumen materials

• Cardboard / hardboard (wet)

• Some fire-retardant treatments used on carpets

• Dyes from printed literature or packaging

• Rubber-backed carpets and rubber mats

• Rubber furniture rests and wheels

• Shoe soles not made from non-staining materials

• Heat degradation

• Some chemicals used in cleaners (e.g. pine oil) and disinfectants

Initial maintenance Note: Do not begin any maintenance procedure until all adhesives have

set (excluding Altro XpressLay and loose lay floors that do not require

the use of adhesive), generally 72 hours after the completion of the

installation.

1. Thoroughly sweep or vacuum the flooring to remove loose dust

and debris.

2. Prepare cleaning solution with fresh, warm water and AltroClean 44.

A dilution rate of 1:40 (or up to 1:10 for heavy soiling) may be used.

AVOID FLOODING THE FLOOR.

3. Scrub the floor with a standard low-speed swing machine (150rpm

– 350 rpm) fitted with an Altro Unipad or manually with a brush fitted

with a square Altro Unipad. Alternatively an Auto Scrubber (3 in 1

machine) fitted with an Altro UniPad can be used.

4. Thoroughly rinse the floor with fresh, clean water and remove wash

water with a wet vac. No cleaning residue should remain. Allow

surface to dry thoroughly before use.

5. Apply 2 coats of sealer to the floor. This will seal the tile joints and

only needs to occur once.

Altro recommends an optional finish for continued

maintenance of Altro Dolce, Altro Dolce Essentials and

Altro Quartz Tile. If you are not applying finish, initial

maintenance ends here.

6. Apply finish to floor depending on product recommendations:

Altro Dolce, Altro Dolce Essentials 2 coats

Altro Quartz Tile *0-2 coats

*finish is optional but preferred on Altro Quartz Tile

7. Allow finish to become dry to the touch (45-60 minutes) in-between

Maintenance guides Warranty forms

Altro Lavencia™ may help contribute to the following LEED credits. Credit values vary based on compliance method and criteria. For further explanation on how this product best contributes to your project we recommend you speak with your LEED consultant.

Product name: Altro Lavencia™ URL: www.altro.com/lavencia

Type: 3mm luxury vinyl tile and plank Region of manufacture: Ohio, USA

LEED v4 credits

Materials and resources Contains recycled content 0% pre-consumer 0% post-consumer

0 LEED point

Materials and resources Rapidly renewable bio-based content does not contain bio-based content

0 LEED point

Materials and resources Building product disclosure and optimization HPD - Health Product Declaration (self declared) In progress

0 LEED point

Indoor Environmental Quality Low-emitting materials Flooring, adhesives FloorScore Certified, CA 01350 compliant

1 - 2 LEED points

Materials and resources Building product disclosure and optimization EPD - Environmental Product Declaration In Progress

0 LEED point

Additional sustainable attributes: Ortho-pthalate free, contains no heavy metals, off-cuts and scrap can be recycled 100%.

Altro LavenciaLEED form

Materials

Altro Lavencia is suitable for all interior floor surfaces, above, on or

below grade, and over concrete or wood substrates. With a commercial

grade UV-cured ceramic reinforced urethane finish and 28 mil wear

layer, Altro Lavencia is ideally suited for environments such as retail,

leisure, health and education.

Altro Lavencia is manufactured under ISO 9001:2008, Quality

management systems and ISO 14001 Environmental Management

System. It is completely recyclable, contains recycled content and is

suitable for use with under-floor heating.

Conditions and requirements

• Concrete floors shall be constructed in accordance with the

American Concrete Institute (ACI) 302.1R-04 Guide for Concrete

Floor and Slab Construction and ACI 302.2R-06 Guide for

Concrete Slabs that Receive Moisture Sensitive Flooring Materials.

Please consult www.concrete.org for the most current editions of

ACI’s.

• Floors must be finished and cured according to ACI with a

minimum compressive strength of 3500 psi.

• Floors must be clean, dry and smooth. Any surface materials,

such as paint, wax, grease, oil, adhesive residues, etc. must be

mechanically removed.

• Floors must be free of any sealers, curing, hardening or parting

compounds that would adversely affect the adhesive used with the

flooring.

• A moisture barrier shall be installed prior to pouring of on or

below grade slabs. All on-grade and below-grade concrete slabs

regardless of the concretes age must have an effective moisture

vapor barrier/retarder present under them; if a fully intact non-

damaged vapor retarder cannot be confirmed then the concrete

must be treated as if it will get wet from ground moisture at a future

time.

• When a sub-slab vapor barrier/retarder cannot be confirmed it is

required to install a surface applied moisture barrier system.

Moisture reduction barriers

While Altro does not approve any specific MRBs we do recognize the

need for them in certain circumstances.

There are no known incompatibility issues with Altro floor coverings,

their adhesives, and the many types of moisture reduction barriers

available, however final determination of a particular product’s suit-

ability and its warranties as regards to the performance of the moisture

reduction system and/or any damage that may be caused to the Altro

floor coverings and their adhesives due to deficiencies in the moisture

reduction system are the responsibility of the moisture reduction

system, manufacturer, and installer.

• Always conduct moisture tests per ASTM F-2170 on all concrete

slabs regardless of age or grade level. ASTM F-2170 relative

humidity (RH) test results must not exceed 90% when using EcoFix

25E or 95% when using EcoFix 65 Spray. As a general rule, a

4” thick slab will require a minimum 3-month drying time before

performing moisture tests. Test results are only indicators of current

moisture conditions at the time of testing and do not predict future

moisture conditions.

• Concrete surface pH must be tested in several locations and be

below a pH of 9.9.

• Wood floors must be double layer construction with a minimum

thickness of 1”. The top layer shall be APA Underlayment Grade

Plywood or other wood underlayment panel approved and war-

ranted beneath resilient flooring. Consult with the underlayment

manufacturer for specific recommendations and warranties.

• Maintain room temperature, adhesive and flooring material at

68° F – 80° F (20C – 26C) for 72 hours before, during and after

installation.

Preparation

• The existing subfloor should be mechanically abraded to remove

any paint, wax, grease, oil, plaster, sealers, curing compounds and

other foreign materials that may be present from the construction

process.

800 377 5597 USA / 800 565 4658 CANsupport@altrofloors.com

www.altro.com

For technical support please call and speak with our Technical Services department.

Installation instructions for Altro LavenciaTM LVT

upd

ated

06/

23/2

0

LEED forms Installation guides

Even more great resources!

Literature

• BIM components

• SpecWizard by Arcat

• SDS sheets

• Detail drawings and CAD files

• High resolution swatch downloads

• Photo galleries - www.altropics.com

• Solutions by area type - ORs, labs and

cleanrooms, kitchens, senior living and more!