aluminium errata407

7/29/2019 Aluminium Errata407

1/2

Aluminum Design Manual 2005 Errata Through April, 2007

Corrected errata pages may be downloaded free at www.aluminum.org. Click on The Industry

(top bar), then Industry Standards (left side), then Aluminum Design Manual Updates/Errata

(bottom of page).

Page Date Correction

IA-24 March 2005 subsection 10, rightmost column, correct the expression to:

2

2

35

/116

+

tR

t

Rn

E

bb

u

IIA-28 March 2005 right column: add (85) at end of sentence The equation for the pull-overstrength of countersunk screws is based on over 200 tests using 5 different

flathead screw sizes, 6 sheet thicknesses, and 2 alloy-tempers (85).

IIA-35 March 2005 add 85. LaBelle, James C. and Dolby, Tanya, INALCO 2004, Flat HeadFastener Pullover in Thin Aluminum with Countersunk Holes, Cleveland,

2004.Index-3 March 2005 under bolts, move "installation" to alphabetical order after dimensions

Index-3 March 2005 dont indent "channels"VI-16 March 2005 for the I 12 x 12.5, change the flange thickness from 0.562 to 0.625.IA-16 May 2005 change the temper for 5086 plate 2.001 to 3.000 from H116 to H112 (8th line for

5086)

change the temper for 5086 sheet & plate from H112 to H116 (9th

line for 5086)

IB-16 May 2005 change the temper for 5086 plate 2.001 to 3.000 from H116 to H112 (8th

line for

5086)change the temper for 5086 sheet & plate from H112 to H116 (9th line for 5086)

V-7 May 2005 change the temper for 5086 plate 2.001 to 3.000 from H116 to H112 (8th line for

5086)

change the temper for 5086 sheet & plate from H112 to H116 (9th line for 5086)VI-21-23

June 2005 switch the y and x dimensions for each angle size

IA-58 October

2005

Equation 5.4.3-2 change to 2Ftu2Dt2/nu and in 5.4.3-4 Pss to Pns

IB-62 October

2005Change 2) to 2u Ftu2Dt2 and in 4) Pss to Pns

IA-4 November

2005

Change 900 19th Street, NW, Washington, DC 20006 Fax: 202-862-5164 to

1525 Wilson Blvd Suite 600, Arlington, VA 22209, Fax: 703-358-2961

IB-4 November

2005

Change 900 19th

Street, NW, Washington, DC 20006 Fax: 202-862-5164 to

1525 Wilson Blvd Suite 600, Arlington, VA 22209, Fax: 703-358-2961

VII-79 January

2006

For 5652-H38 change the 3/8 in. thickness bend radius from 52t to 5 t

and the 1/2 in. thickness from 62t to 6 tVIII-7 February

2006

Delete the row in the table that shows section 4.4 and example 22

IA-68 February

2006

For 356.0-T6, change Ftu from 171 to 228 and change Fty from 114 to 152.

IB-74 February

2006

For 356.0-T6, change Ftu from 171 to 228 and change Fty from 114 to 152.

VII-28 March

2006

section 3.4.1: reverse the order of 8 and 8.5. (8.5 goes on top, across from

"gross section")

7/29/2019 Aluminium Errata407

2/2

VII-34 March

2006

section 3.4.1: reverse the order of 14.5 and 16

VII-36 March

2006


VII-38 March

2006


VII-40 March

2006

section 3.4.1: reverse the order of 13 and 12

VII-42 March

2006


VII-44 March

2006


VII-46 March

2006

section 3.4.1: reverse the order of 21and 14.5

VII-48 March

2006


VII-50 March

2006


VII-52 March

2006

section 3.4.1: reverse the order of 18 and 12.5

VII-54 March2006


VII-56 March

2006

section 3.4.1: reverse the order of 17 and 11.5

VII-58 March

2006


VII-60 March2006


VII-62 March

2006


VII-64 March

2006


VII-66 March

2006


VII-68 March

2006


VII-70 March2006

section 3.4.1: reverse the order of 11.5 and 9.5

VII-76 March

2006


IA-32 March

2006

in section 3.4.10, change b/ttoRb/tin 3 places

IA-34 March

2006

in section 3.4.16.1 change b/ttoRb/tin 3 places

VIII-66 February

2007

change Pss to Pns (2 places); change Pnot to Pnot/ns (2 places); change Pnov to

Pnov/ns (2 places)

V-23 April

2007

in STRENGTH column heading, change ksi to MPa

aluminium errata407

Documents