aluminum bracket system · aluminum bracket system about us bsp bracket system polska b sp bracket...
TRANSCRIPT
Aluminum
Bracket System
General Catalogue 2015
EUROPEAN UNION
EUROPEAN REGIONAL DVELOPMENT FUND
www.bspsystem.com2
Alu
min
um
Bra
ck
et
Sy
ste
mCONTENTS
BSP Bracket System Polska ................................................................................................................. 3
PRODUCTS
Fixing systems for curtain walls ...................................................................................................... 4Bracket BSP Type K1 ...................................................................................................................................... 5Bracket BSP Type K2 ...................................................................................................................................... 7Extension Piece BSP Type KP1/173 ....................................................................................................... 9BSP extruded aluminum brackets - example of application ................................................. 10 Insert bracket BSP Type K3 ..................................................................................................................... 11Bracket for segment based curtain walling system BSP Type KE ........................................ 12
Fixing systems for ventilated façades ...................................................................................... 11Advantages of ventilated facades ...................................................................................................... 14Bracket BSP Type KW1 .............................................................................................................................. 15Heat transfer reduction ............................................................................................................................ 16Passive Bracket BSP Type KW1 PAS ..................................................................................................... 17Passive Bracket BSP Type KW2 PAS ..................................................................................................... 18Insulation pads BSP Type PE .................................................................................................................19Bracket BSP Type KW1/40-650 ............................................................................................................. 20Brackets ECO BRACKET range Type KW 1 EB/170-A-Fix/Los .................................................. 21Adjustment of the BSP aluminum substructure ......................................................................... 22Extension Piece BSP Type KWP1 ......................................................................................................... 23Foot BSP Type KWW1 ................................................................................................................................ 24Support BSP Type KWP2 .......................................................................................................................... 24Profile BSP Type KWR1, KWR2 ............................................................................................................... 25Profile BSP Type KWR3, KWR4 ............................................................................................................... 26Perforated aluminum sheet BSP Typ KWS1 .................................................................................... 26Window Recess profile BSP Type KWRG .......................................................................................... 27Profile ECO BRACKET KWR9, KWR7, KWR10, KWR11 .................................................................. 28Brackets and profiles in vertical system - example of application ..................................... 30 Bracket systems for interior cladding ...................................................................................... 31Bracket BSP Type KW1/40 ....................................................................................................................... 31Profile BSP Type KWR5, KWR8 ............................................................................................................... 31
Hanging brackets system .................................................................................................................. 32Profile BSP Type KWRW ............................................................................................................................ 32System KWRY for supporting ACM or metal sheets cassettes ............................................ 33Hanging profile BSP Type KWH ............................................................................................................ 34
Floor to Floor BSP System ................................................................................................................. 35Profile BSP Type KWR6 .............................................................................................................................. 36Sections and models ................................................................................................................................. 36
Additional substructure elements .............................................................................................. 37Bracket BSP Type KWD/A-B .................................................................................................................... 37Profile BSP Type KWRK .............................................................................................................................. 37Omega BSP profile Type RW2 ............................................................................................................... 38
Supporting system BSP Type KCS ............................................................................................... 39System for supporting ceramic tiles and stone panels ............................................................ 39System for supporting glass panels ................................................................................................... 40
System BSP Solar for solar panels fixation on facades ................................................ 41
Decorative profiles ................................................................................................................................ 42Outward angle profile BSP Type KWN1 ........................................................................................... 42Inlet angle profile BSP Type KWN2 ..................................................................................................... 42Joint profile BSP Type KWF1 .................................................................................................................. 42Closing profile BSP Typ KWF2 ............................................................................................................... 42Joint profile BSP Typ KWF3 ..................................................................................................................... 42
EXAMPLES AND CALCULATIONS
Horizontal brackets BSP - examples of applications ................................................................. 43Exemplary assembly scheme ................................................................................................................ 43Examples of subconstruction layout ................................................................................................. 44Examples of load calculations .............................................................................................................. 45
ADDITIONAL SERVICES
Design and assistance .............................................................................................................................. 46Other services ............................................................................................................................................... 46
REFERENCES
Excerpt from reference list ..................................................................................................................... 47Photographs of selected objects ........................................................................................................ 50
www.bspsystem.com 3
Alu
min
um
Bra
ck
et
Sy
ste
m
ABOUT US
BSP Bracket System Polska
BSP Bracket System Polska Ltd delivers a complete
bracket system for façades. We focus on quality, in-
novation and constant improvement to obtain the
final goal which is to satisfy the needs of all market players
ranging from architects, cladding material manufacturers,
Contractors to installation companies.
We offer years of experience, in-depth knowledge of the building
market and a complete range of solutions meeting every need
and application, when it comes to building façades.
Our entrepreneurial spirit stands for continuous development.
Our success is based upon our ability to think beyond boundar-
ies, which enables us to discover opportunities resulting in new
perspectives for our customers.
Our staff consists of experienced and recognized experts in the
area of engineering, construction management processes, in-
vestments, design, project implementations, financing and tech-
nical support and works coordinations.
System BSP is recommended by world leader in façade
materials - Etex Group (Producer of Equitone FC panels).
The BSP registered trademark and the BSP bracket system are protected by law.
Copying and publishing without permission is prohibited by law.
www.bspsystem.com4
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for curtain walls
BSP extruded aluminum brackets are designed to fix aluminum curtain wall facades. Optimally
designed brackets allow the transfer of all loads from the construction of the facade to the main
load-bearing structures of the building.
BSP bracket system allows very precise positioning of the cladding panels, with the possibility of adjusting its posi-
tion in three directions without the need to use leveling pads.
Advantages of extruded aluminum brackets BSP for curtain wall facades:
• Resistance to weather, especially when compared with steel brackets.
• Light weight reducing cost of transportation.
• Possibility of drilling additional holes or cutting without the need for special anticorrosion treatment.
• No galvanic corrosion at the interface with other elements of aluminum.
• No welded joints and the risks of improper welding work.
• Lack of internal stress states, characteristic of consoles bent or welded.
• Optionally brackets can be supplied as a powder coated or anodized.
• Reduced delivery time. Standard products available from stock.
www.bspsystem.com 5
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for curtain walls
Description A B
Bracket BSP Type K1/100-150-FIX 100 150
Bracket BSP Type K1/100-120-FIX 100 120
Bracket BSP Type K1/100-100-FIX 100 100
Bracket BSP Type K1/100-80-FIX 100 80
Bracket BSP Type K1/120-150-FIX 120 150
Bracket BSP Type K1/120-120-FIX 120 120
Bracket BSP Type K1/120-100-FIX 120 100
Bracket BSP Type K1/120-80-FIX 120 80
Bracket BSP Type K1/200-150-FIX 200 150
Bracket BSP Type K1/200-120-FIX 200 120
Bracket BSP Type K1/200-100-FIX 200 100
Bracket BSP Type K1/200-80-FIX 200 80
Bracket BSP Type K1/Fix
180 for K1/200 200 for K1/100, K1/120
www.bspsystem.com6
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A B
Bracket BSP Type K1/100-150-LOS 100 150
Bracket BSP Type K1/100-120-LOS 100 120
Bracket BSP Type K1/100-100-LOS 100 100
Bracket BSP Type K1/100-80-LOS 100 80
Bracket BSP Type K1/120-150-LOS 120 150
Bracket BSP Type K1/120-120-LOS 120 120
Bracket BSP Type K1/120-100-LOS 120 100
Bracket BSP Type K1/120-80-LOS 120 80
Bracket BSP Type K1/200-150-LOS 200 150
Bracket BSP Type K1/200-120-LOS 200 120
Bracket BSP Type K1/200-100-LOS 200 100
Bracket BSP Type K1/200-80-LOS 200 80
PRODUCTS
Fixing systems for curtain walls
Bracket BSP Type K1/Los
200 for K1/100, K1/120180 for K1/200
www.bspsystem.com 7
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for curtain walls
Bracket BSP Type K2/Fix
Description A B
Bracket BSP Type K2/100-150-FIX 100 150
Bracket BSP Type K2/100-120-FIX 100 120
Bracket BSP Type K2/100-100-FIX 100 100
Bracket BSP Type K2/100-80-FIX 100 80
Bracket BSP Type K2/120-150-FIX 120 150
Bracket BSP Type K2/120-120-FIX 120 120
Bracket BSP Type K2/120-100-FIX 120 100
Bracket BSP Type K2/120-80-FIX 120 80
Bracket BSP Type K2/200-150-FIX* 200 150
Bracket BSP Type K2/200-120-FIX* 200 120
Bracket BSP Type K2/200-100-FIX* 200 100
Bracket BSP Type K2/200-80-FIX* 200 80
* Available soon
www.bspsystem.com8
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A B
Bracket BSP Type K2/100-150-LOS 100 150
Bracket BSP Type K2/100-120-LOS 100 120
Bracket BSP Type K2/100-100-LOS 100 100
Bracket BSP Type K2/100-80-LOS 100 80
Bracket BSP Type K2/120-150-LOS 120 150
Bracket BSP Type K2/120-120-LOS 120 120
Bracket BSP Type K2/120-100-LOS 120 100
Bracket BSP Type K2/120-80-LOS 120 80
Bracket BSP Type K2/200-150-LOS* 200 150
Bracket BSP Type K2/200-120-LOS* 200 120
Bracket BSP Type K2/200-100-LOS* 200 100
Bracket BSP Type K2/200-80-LOS* 200 80
* Available soon
PRODUCTS
Fixing systems for curtain walls
Bracket BSP Type K2/Los
www.bspsystem.com 9
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A
Extension Piece BSP Type KP1/173-150 FIX 150
Extension Piece BSP Type KP1/173-120 FIX 120
Extension Piece BSP Type KP1/173-100 FIX 100
Extension Piece BSP Type KP1/173-80 FIX 80
Extension Piece BSP Type KP1/173-150 LOS 150
Extension Piece BSP Type KP1/173-120 LOS 120
Extension Piece BSP Type KP1/173-100 LOS 100
Extension Piece BSP Type KP1/173-80 LOS 80
PRODUCTS
Fixing systems for curtain walls
Extension Piece BSP Type KP1/173 Fix - Los
NEW
BSP Extension Piece Type KP1/173 BSP Extension Piece Type KP1/173 Fix BSP Extension Piece Type KP1/173 Los
www.bspsystem.com10
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for curtain walls
BSP extruded aluminum brackets - example of application
Wide range of regulation helps to avoid problems
with the tolerance of wall construction +/- 20 mm
Side bracket within
wall dilatation joint…
…within places where standard bracket does not fit for ex.
corners
Bracket BSP Type K2/A-B-FIXBracket BSP Type K2/A-B-LOS
Bracket BSP Type K2/A-B-FIXBracket BSP Type K2/A-B-LOS
Brac
ket B
SP T
ype
K2/A
-B-F
IXBr
acke
t BSP
Typ
e K2
/A-B
-LO
S
www.bspsystem.com 11
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for ventilated façades
Description B
Insert Bracket BSP Type K3/158-150 150
Insert Bracket BSP Type K3/158-120 120
Insert Bracket BSP Type K3/158-100 100
Insert Bracket BSP Type K3
Insert Bracket BSP type K3
lx 617,496 cm4 ly 786,546 cm4
Wx 50,213 cm3 Wy 71,504 cm3
Field 26,761 cm2 Mass 7,252 kg/m
Unlike brackets K1 and K2 fixed from lateral side of the slabs K3 brackets are mounted on the surface of slab. In this case, the box profile is inserted onto the bracket as shown in the picture:
K3 insert bracket can also be used wherever there is a need for fixing the box profiles perpendicularly to the structure surface and where lateral fixing is impossibe.
Exemplary applications:
• mounting support for roof screens• balconies• sunscreens• protective screens• ventilation openings• parking garages• other special applications.
NEW
Box
profi
le
Bracket BSP Type K3
Fixed point
Sliding pointSliding point
Bracket BSP Type K3
www.bspsystem.com12
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for ventilated façades
Bracket for segment based curtain walling system BSP Type KE
Bracket for segment based curtain walling system is a
special solution to achieve a modular wall structure: All the elements are prefabricated in
a production plant and assam-bled to complete glazed seg-
ments. Then the segments are delivered to the worksite and attached to the bearing con-structruction of the building
with BSP Type KE brackets.
NEW
Segment based façade
Segm
ent b
ased
faça
de
BSP Bracket Type KE
BSP
Brac
ket
Type
KE
www.bspsystem.com 13
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for ventilated façades
Aluminum made substruction for fixing cladding panels consists of brackets and the profiles. It
is used for precise fixing of cladding panels, ie: fiber-cement, HPL, aluminium composite, archi-
tectural concrete, aluminum louver, and other cladding materials.
Brackets are used to transfer loads between the profiles and the structure of the building. Depending on
the distance between cladding panels and the main structure of building brackets of different outreach are
used. In order to reduce instalation time and make the fixing work easier the shape of brackets has been
designed for easy adjustment and proper lining of the grid observing required tolerances and variations in
alignment. BSP brackets can correct the variations of alignment up to + / - 20 mm without the need to use
leveling pads.
There are generally two kinds of vertical profiles: “T” profiles (KWR1, KWR3, KWR9) used for connections of
two cladding panels and “L” profiles (KWR2, KWR4, KWR5, KWR7, KWR10, KWR11) appropriate to fix the pa-
nels in other areas.
Both have small grooves on the outer surface what considerably increases the durability of the junction
between the profiles and cladding material.
Advantages of extruded aluminum brackets for ventilated façades:
• Increased capacity allowing for cost optimization when calculating mechanical parameters of the substructure.
• Patented foot improving the mechanical strength of bracket.
• Extruded brackets compared to bent brackets have no initial stresses and microcracks that weaken their
mechanical proprieties.
• Resistance to weather, especially when compared to steel brackets.
• Light weight important for the cost of transportation and handling.
• Possibility of cutting or drilling additional holes without the need for special anticorrosion treatment.
• No galvanic corrosion between different aluminum elements.
• High aesthetics of fabrication: brackets can be optionally supplied
as a powder coated or anodized.
• Reduced delivery time and vast range of products available from
stock.
d
www.bspsystem.com14
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for ventilated façades
Advantages of ventilated facades
BSP bracket for sliding points
BSP bracket for sliding points
BSP bracket for fixed points
BSP bracket for fixed points
Thermal insulation
Fire resistance
Wall ventilation
Acustic insulation
Thermal insulation
Thermal insulation
Ventilated cavity
BSP bracket for fixed pointsThermal insulation
Ventilated cavityBSP vertical ProfileCladding panelThermal insulation
BSP vertical ProfileCladding panelThermal insulation
BSP vertical ProfileVentilated cavity
Cladding panelThermal insulation
BSP aluminum bracket
Cladding panel
BSP aluminum bracket
Cladding panelBSP vertical ProfileVentilated cavityThermal insulation
BSP aluminum bracket
BSP vertical ProfileVentilated cavityThermal insulation
BSP vertical ProfileCladding panelThermal insulation
www.bspsystem.com 15
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A B
Bracket BSP Type KW1/40-150 40 150
Bracket BSP Type KW1/40-120 40 120
Bracket BSP Type KW1/40-90 40 90
Bracket BSP Type KW1/40-60 40 60
Bracket BSP Type KW1/40-40 40 40
Bracket BSP Type KW1/80-150 80 150
Bracket BSP Type KW1/80-120 80 120
Bracket BSP Type KW1/80-90 80 90
Bracket BSP Type KW1/80-60 80 60
Bracket BSP Type KW1/80-40 80 40
Bracket BSP Type KW1/120-150 120 150
Bracket BSP Type KW1/120-120 120 120
Bracket BSP Type KW1/120-90 120 90
Bracket BSP Type KW1/120-60 120 60
Bracket BSP Type KW1/120-40 120 40
Bracket BSP Type KW1/140-150 140 150
Bracket BSP Type KW1/140-120 140 120
Bracket BSP Type KW1/140-90 140 90
Bracket BSP Type KW1/140-60 140 60
Bracket BSP Type KW1/140-40 140 40
Description A B
Bracket BSP Type KW1/170-150 170 150
Bracket BSP Type KW1/170-120 170 120
Bracket BSP Type KW1/170-90 170 90
Bracket BSP Type KW1/170-60 170 60
Bracket BSP Type KW1/170-40 170 40
Bracket BSP Type KW1/210-150 210 150
Bracket BSP Type KW1/210-120 210 120
Bracket BSP Type KW1/210-90 210 90
Bracket BSP Type KW1/210-60 210 60
Bracket BSP Type KW1/210-40 210 40
Bracket BSP Type KW1/310-150 310 150
Bracket BSP Type KW1/310-120 310 120
Bracket BSP Type KW1/310-90 310 90
Bracket BSP Type KW1/310-60 310 60
Bracket BSP Type KW1/310-40 310 40
PRODUCTS
Fixing systems for ventilated façades
Bracket BSP Type KW1/A-B-Fix-Los
9
B-50R4.5
12.5
R2.5
R2.5
28
4
A
B
A
9
30
5925
25B
53
28
9
30
B/2B/2
B
53
4
www.bspsystem.com16
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for ventilated façades
Heat transfer reduction
The technology of the ventilated façade has a number of important advantages such as excellent thermal insulation proper-ties, great possibilities of architectural design, high aesthetic values, fast moisture dissipation from the building, etc. Unfortu-nately ventilated facades also have one unfavorable disadvantage: heat bridges. Aluminum support structure (brackets and profiles) used for fastening the cladding panels to the building construction is among the factors which considerably contri-bute to the uncontrolled heat transfer between the interior and the exterior part of the building. The brackets being made of materials of high thermal conductivity go through the layers of insulation and consequently cause increased heat losses.
The formation of thermal bridges has the following consequences:
• Heat loss resulting in energy losses, which directly affects the energy balance of the building
• Cooling of the outer walls resulting in vapor and moisture condensation in the area of the insulation and construc-tion materials. This in turn can contribute to the development of harmful fungi and molds
In the figure below, one can observe the temperature distribution arround the standard BSP aluminum bracket (without the use of thermal insulators).
Reducing the risk of thermal bridges in ventilated facades can be achieved through appropriate planning and careful manu-facturing of the supporting structures.
These should be done in accordance with the established construction trade practices. As the rules and standards for the thermal protection parameters in construction projects (heat transfer coefficient value) have become more and more chal-lenging, these methods may no longer be sufficient. This is why BSP developed an innovative solution that radically and efficiently resolves the problem of thermal bridges offering a unique opportunities to the architects and constructors specia-lizing in energy efficient construction projects: passive brackets.
Methods to minimize the risk of thermal bridges: 1. Using foamed PVC or special plastic material as thermal insulation and anticorrosion protection materials isolating
the brackets from the wall.2. Applying BSP substraction where less brackets are needed and thus the number of potential thermal bridges is redu-
ced.3. Using passive brackets (with a non-metallic component) which almost completely eliminates the thermal bridge
phenomenon.The following figure shows the temperature distribution around the BSP passive bracket.
AB
-15
-15 -15 -10 -10
-5 -5 0 0
5 5 10 10
15
15 15
15
-19 -19
-13
16 16 17 17
18
18
18
18 20,0 oC
15,0 oC
10,0 oC
5,0 oC
0,0 oC
-5,0 oC
-10,0 oC
-15,0 oC
-20,0 oC
AB
-15 -15 -10 -10 -5 -5 0 0 5 5
10 10 15 15
-19 -19
19 19 19
19 20,0 oC
15,0 oC
10,0 oC
5,0 oC
0,0 oC
-5,0 oC
-10,0 oC
-15,0 oC
-20,0 oC
Figure 1: Temperature distribution for standar bracket (in temperature scale)
Figure 2: Temperature distribution graph for BSP PAS - Passive Bracket (in temperature scale)
www.bspsystem.com 17
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A B
Passive bracket BSP Type KW PAS 170-150 FIX/LOS 170 150
Passive bracket BSP Type KW PAS 170-120 FIX/LOS 170 120
Passive bracket BSP Type KW PAS 170-90 FIX/LOS 170 90
Passive bracket BSP Type KW PAS 210-150 FIX/LOS 210 150
Passive bracket BSP Type KW PAS 210-120 FIX/LOS 210 120
Passive bracket BSP Type KW PAS 210-90 FIX/LOS 210 90
Passive bracket BSP Type KW PAS 250-150 FIX/LOS 250 150
Passive bracket BSP Type KW PAS 250-120 FIX/LOS 250 120
Passive bracket BSP Type KW PAS 250-90 FIX/LOS 250 90
Passive bracket BSP Type KW PAS 280-150 FIX/LOS 280 150
Passive bracket BSP Type KW PAS 280-120 FIX/LOS 280 120
Passive bracket BSP Type KW PAS 280-90 FIX/LOS 280 90
PRODUCTS
Fixing systems for ventilated façades
Passive bracket KW1 PAS/A-B-Fix/Los
In order to meet constantly increasing requirements concerinng the insulating performances for external walls insulations our R&D division developed a passive bracket. The product is dedicated to architects, designers and Contractors looking for a modern, energy-efficient and innovative solutions.
Passive bracket almost completely eliminates thermal bridges enabling to meet already today the strict requirements for the heat transfer coefficient value (Umax) provided for 2021.
Element Umax to 2014 Umax 2014 Umax 2017 Umax 2021
Wallsexternal 0,30 0,25 0,23 0,20
www.bspsystem.com18
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for ventilated façades
Passive bracket KW1 PAS/A-B-Fix/Los
a
b
A=a+
b-65
A=a+
b-65
B
Complementary to the range of passive bracket BSP offers passive bracket KW2 PAS without aluminum extension piece. This solution can be used whenever there is no need for leveling the facade during installation.
Description A B
Passive bracket BSP Type KW PAS 170-150 FIX/LOS 170 150
Passive bracket BSP Type KW PAS 170-120 FIX/LOS 170 120
Passive bracket BSP Type KW PAS 170-90 FIX/LOS 170 90
Passive bracket BSP Type KW PAS 210-150 FIX/LOS 210 150
Passive bracket BSP Type KW PAS 210-120 FIX/LOS 210 120
Passive bracket BSP Type KW PAS 210-90 FIX/LOS 210 90
Passive bracket BSP Type KW PAS 250-150 FIX/LOS 250 150
Passive bracket BSP Type KW PAS 250-120 FIX/LOS 250 120
Passive bracket BSP Type KW PAS 250-90 FIX/LOS 250 90
Passive bracket BSP Type KW PAS 280-150 FIX/LOS 280 150
Passive bracket BSP Type KW PAS 280-120 FIX/LOS 280 120
Passive bracket BSP Type KW PAS 280-90 FIX/LOS 280 90
www.bspsystem.com 19
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for ventilated façades
BSP insulating pads for ventilated facades BSP Type PE
BSP insulating pads are made of high-density polyethylene HDPE obtained by low pressure polymerization. This material is hard, strong, mechanically and chemically resistant.
1. Physically separate the two different materials: aluminum and the material of the wall creating the insulation against corrosion.
2. As a material of very high thermal resistance the pads signi-ficantly limit thermal bridges phenomenon reducing total energy loss.
Adjusting the right pad size to appropriate bracket can be obtained through cutting the pad along the grooved line with special BSP knife.
grooved line 1 mm
NEW
www.bspsystem.com20
Alu
min
um
Bra
ck
et
Sy
ste
m
650
4242
52
25
9
11 Ø5
8
A
30
52
Bracket BSP Type KW1/40-650 Fix/Los
PRODUCTS
Fixing systems for ventilated façades
This bracket is recommended for renovation works without removing the existing thermal insulation.
www.bspsystem.com 21
Alu
min
um
Bra
ck
et
Sy
ste
m
ECO Bracket Type KW1 EB/170-A-Fix/Los
PRODUCTS
Fixing systems for ventilated façades
Through in-depth research and analysis BSP developed a new economical extruded aluminum
made substructure dedicated to mounting cladding façade panels. ECO BRACKET range consists of
brackets (170 mm of outreach, five different foot size) and a set of extruded profiles. Brackets have
a variable wall thickness for maximum load capacity optimized aluminum usage.
Note: The BSP recommends using ECO BRACKET profiles and brackets up to 12 m of building height.
Description A B
Eco Bracket Type KW1 EB/170-150 FIX/LOS 170 150
Eco Bracket Type KW1 EB/170-120 FIX/LOS 170 120
Eco Bracket Type KW1 EB/170-90 FIX/LOS 170 90
Eco Bracket Type KW1 EB/170-60 FIX/LOS 170 60
Bracket Type KW1 EB/170-40 FIX/LOS 170 40
NEW
170
59
61.5
45.5
54
3
2
www.bspsystem.com22
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for ventilated façades
Adjustment range of BSP aluminum substructure
Use of BSP extension piece KWP1/A-B
470
42
45
BRACKET BSP TYP KW1/140
PRO
FILE
BSP
TYP
E KW
R1
EXTENSION BRACKET BSP KWP1/135
BRACKET BSP TYP KW1/40
Adjustment from 42 mm to 470 mm
PRO
FILE
BSP
TYP
E KW
R1
BRACKET BSP TYP KW1/140
PRO
FILE
BSP
TYP
E KW
R1
PRO
FILE
BSP
TYP
E KW
R1
BRACKET BSP TYP KW1/210
BRACKET BSP TYP KW1/310
BRACKET BSP TYP KW1/310
www.bspsystem.com 23
Alu
min
um
Bra
ck
et
Sy
ste
mDescription A
Extension Piece BSP Type KWP1/135-150 150
Extension Piece BSP Type KWP1/135-120 120
Extension Piece BSP Type KWP1/135-90 90
Extension Piece BSP Type KWP1/135-60 60
PRODUCTS
Fixing systems for ventilated façades
Extension Piece BSP Type KWP1/A-B
3,0
A13
5
www.bspsystem.com24
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Fixing systems for ventilated façades
Foot BSP Type KWW1/A-B
Support BSP Type KWP2/A-B
Description A
Foot BSP Type KWW1/65-150 150
Foot BSP Type KWW1/65-120 120
Foot BSP Type KWW1/65-90 100
Foot BSP Type KWW1/65-60 60
Description A
Support BSP Type KWP2/193-150 150
Support BSP Type KWP2/193-120 120
Support BSP Type KWP2/193-90 100
Support BSP Type KWP2/193-60 60
Foot BSP Type KWW1/65-A
Support BSP Type KWP2/193-A
KW1/210-A
Bracket with the additional support Used for bigger loads and outreaches
and also as horizontal brackets
www.bspsystem.com 25
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for ventilated façades
Description
Profile BSP Type KWR1 bar 3100 mm
Profile BSP Type KWR1 bar 2700 mm
lx 15,467 cm4 ly 26,316 cm4
Wx 2,776 cm3 Wy 4,386 cm3
Field 3,582 cm2 Mass 0,971 kg/m
lx 11,877 cm4 ly 5,038 cm4
Wx 2,467 cm3 Wy 1,279 cm3
Field 2,278 cm2 Mass 0,617 kg/m
Description
Profile BSP Type KWR2 bar 3100 mm
Profile BSP Type KWR2 bar 2700 mm
Profile BSP Type KWR1
Profile BSP Type KWR2
www.bspsystem.com26
Alu
min
um
Bra
ck
et
Sy
ste
m
lx 5,864 cm4 ly 16,546 cm4
Wx 1,432 cm3 Wy 3,309 cm3
Field 2’963 cm2 Mass 0,803 kg/m
lx 4,908 cm4 ly 4,908 cm4
Wx 1,335 cm3 Wy 1,335 cm3
Field 1,960 cm2 Mass 0,531 kg/m
Description
Profile BSP Type KWR3 bar 3000 mm
PRODUCTS
Fixing systems for ventilated façades
Profile BSP Type KWR3
Perforated aluminum sheet BSP Type KWS1
Profile BSP Type KWR4
ø8
12
12
Description A B
Profile BSP Type KWR4 - 50 x 50 mm, bar 3000 mm
50 50
Perforated aluminum sheet is used for closing
the air gap in the ven-tilated facades forming
a protection against rodents or other small
animals.
www.bspsystem.com 27
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for ventilated façades
Window recess profile BSP Type KWRG
Window recess profile BSP Type KWRG
lx 17,266 cm4 ly 131,371 cm4
Wx 2,931 cm3 Wy 12,692 cm3
Field 4,819 cm2 Mass 1,306 kg/m
Window recess profile KWRG has been specially deve-loped to stiffen the junction between the panels fixed in the window recess and the wall panels. Additionally KWRG profile can be used in the area where the fixing point of panel is far from the place where ancoring is not possible, like on the example drawings below.
Profile BSP Type KWRG
Profile BSP Type KWRG
Profile BSP Type KWRG
Profile BSP Type KWR2
Profile BSP Type KWR2
Bracket BSP Type KW1 Bracket BSP Type KW1
Bracket BSP Type KW1
Railing Bracket
www.bspsystem.com28
Alu
min
um
Bra
ck
et
Sy
ste
m
100.0
60.0
1.75
1.75
50.0
PRODUCTS
Fixing systems for ventilated façades
Profile ECO BRACKET Type KWR9
During development of the ECO BRACKET range well proven solutions, known from standard
BSP substructure, were applied such as riffled surface of profiles to facilitate the draining of
water and atmospheric moisture from the gap between the panels and profiles.
The thickness of supporting profiles made of extruded aluminum were optimized and could
be applied wherever the aluminum support structure does not require to transfer significant
loads.
Note: BSP recommends using ECO BRACKET profiles and brackets up to 12 m height of the building.
Description
Profile T1 ECO BRACKET Type KWR9 bar 3100
NEW
lx 8,421 cm4 ly 13,179 cm4
Wx 1,773 cm3 Wy 2,636 cm3
Field 2,627 cm2 Mass 0,712 kg/m
www.bspsystem.com 29
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Fixing systems for ventilated façades
Profile ECO BRACKET Type KWR7
Profile ECO BRACKET Type KWR10
Profile ECO BRACKET Type KWR11
Description
Profile L1 ECO BRACKET Type KWR7 bar 3100
Description
Profile L2 ECO BRACKET Type KWR10 bar 3100
Description
Profile L3 ECO BRACKET Type KWR11 bar 3100
NEW
NEW
NEW
lx 5,767 cm4 ly 1,003 cm4
Wx 1,488 cm3 Wy 0,407 cm3
Field 1,497 cm2 Mass 0,406 kg/m
lx 6,354 cm4 ly 2,266 cm4
Wx 1,561 cm3 Wy 0,712 cm3
Field 1,654 cm2 Mass 0,448 kg/m
lx 2,092 cm4 ly 2,027 cm4
Wx 0,724 cm3 Wy 0,679 cm3
Field 1,304 cm2 Mass 0,353 kg/m
40.0
1.75
1.75
40.0
60.0
1.75
1.75
40.0
60.0
1.75
1.75
30.0
yp
www.bspsystem.com30
Alu
min
um
Bra
ck
et
Sy
ste
m
· Standard BSP Brackets· Standard BSP Profiles - thickness 2 mm· Eco Bracket - KW1 EB· Eco Bracket profiles - thickness below 2 mm
· Standard BSP Brackets· Standard BSP Profiles - thickness 2 mm· Eco Bracket profiles - thickness below 2 mm
· Standard BSP Brackets· Standard BSP Profiles - thickness 2 mm
12 m
above 25 m
PRODUCTS
Fixing systems for ventilated façades
Brackets and profiles in vertical system - example of application
BSP allows using Eco Bracket range higher after prior approval of the required static calculations.
www.bspsystem.com 31
Alu
min
um
Bra
ck
et
Sy
ste
m
A
A
Profile BSP Type KWR5
Bracket BSP Type KW1/40-A-Fix/Los
lx 2,305 cm4 ly 6,454 cm4
Wx 0,785 cm3 Wy 1,607 cm3
Field 1,794 cm2 Mass 0,486 kg/m
Description A
Bracket BSP Type KW1/40-120/Fix/Los 120
Bracket BSP Type KW1/40-90/Fix/Los 90
Bracket BSP Type KW1/40-60/Fix/Los 60
PRODUCTS
Bracket systems for interior cladding
BSP bracket type KW1/40 and profile type KWR5 is used for mounting the internal panels, in areas where no additional thermal insulation is needed. The adjustment of distance between the wall surface and cladding panels varies from 45 mm to 90 mm. This solution is particularly recommended for fixing by glue or rivets.
90.0
38.0
33.0
1.8
1.8
45.0
Profile BSP Type KWR8
Description
Profile BSP Type KWR8 bar 3100
NEW
lx 2,325 cm4 ly 10,879 cm4
Wx 0,741 cm3 Wy 2,236 cm3
Field 2,164 cm2 Mass 0,587 kg/m
www.bspsystem.com32
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Hanging system
BSP hanging system allows precise fixing of HPL cladding, fiber cement and other types of cladding
materials used both indoors and outdoors. The hanging system enables the distance adjustment
in the vertical direction up to 10 mm. To secure precise vertical adjustment, a screw and a nut set in
a particularly designed guide channel are used. To facilitate the operation of hole drilling there are
markers on the surface of the profile.
As additional advantage BSP hanging system enables easy removing and re-attachment, without damaging
the panels and profiles.
The system can be used in the following configurations:
• When there is no need for leveling uneven walls and the use of thermal insulation. In this case supporting
profile KWRW is mounted directly to the wall. The hanging element is attached directly to the back of the
cladding panel (fixed with glue or undercut anchors). - Fig. 1
• When thermal insulation is required. In this case additional vertical supporting profiles are attached to the
wall with KW1 brackets. These profiles are used to fix the horizontal KWRW supporting profiles, to which
cladding panels are mounted. - Fig. 2
Profile BSP Type KWRW
Fixi
ng w
ith
unde
rcut
anc
hor
Fixi
ng w
ith
unde
rcut
anc
hor
Fixi
ng
with
glu
e
Fixi
ng
with
glu
e
Profi
le B
SP T
ype
KWR1
/KW
R2
Bracket BSP Type KW1/A-B
Fig. 2Fig. 1
www.bspsystem.com 33
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Hanging system
Profile BSP Type KWRY50
1.8
2.0
1.8
55.099.0
2.0
15.5
50.0
22 55 22
99
1565
80
2
2
Profile BSP Type KWRY50
lx 4,3421 cm4 ly 18,992 cm4
Wx 1,195 cm3 Wy 3,837 cm3
Field 3,024 cm2 Mass 0,819 kg/m
Profile BSP Type KWRY80
lx 16,848 cm4 ly 18,324 cm4
Wx 2,886 cm3 Wy 3,702 cm3
Field 3,423 cm2 Mass 0,928 kg/m
System KWRY for supporting ACM or metal sheets cassettes
The system consists of two Y profile sizes (KWRY50 and KWRY80) and hanger plate KWZ with anti rattle gasket. System allows installing ACM or metal sheets cassettes
Profile BSP Type KWRY80
Hanger plate KWZ
22,5 54 22,5
99
18,5
12,6
31,1
3
1,6
www.bspsystem.com34
Alu
min
um
Bra
ck
et
Sy
ste
m
KWH hanging system is used for concealed fix of cladding panels by means of undercut bolts. This
system is characterized by high load capacity, allowing to mount heavy cladding panels, eg. stone
or concrete architecture.
Hanging profile BSP Type KWH
Bracket BSP Type KW1
Profi
l BSP
Typ
e KW
RY
Profile BSP Type KWRY
Bracket BSP Type KW1
Han
ging
pro
file
BSP
Type
KW
Z
Hanging profile BSP Type KWZ
Hanging profile BSP Type KWH
Hanging profile BSP Type KWZ
PRODUCTS
Hanging system
www.bspsystem.com 35
Alu
min
um
Bra
ck
et
Sy
ste
m
lx 89,044 cm4 ly 51,629 cm4
Wx 17,048 cm3 Wy 8,605 cm3
Field 7,952 cm2 Mass 2,30 kg/m
PRODUCTS
Floor to Floor BSP System
Profile BSP Type KWR6
The BSP Floor to Floor system has been designed to minimize the amount of substructure
between the façade panels and the wall of the building. The goal of this system is to increase
the distance between the neighboring brackets, mostly from floor to floor of the building.
Brackets are fixed to the structural elements of the building, usually to the face of the floor slab.
K1 and K2 BSP brackets meet elevated requirements for mechanical capacity and rigidity of the supporting
elements in order to transfer considerable stresses resulting from rare distribution of brackets fixed only
to the floor slabs.
On the other hand, vertical profiles KWR6 have reinforced structure, so that it can safely carry the increased
wind load and the deflection forces do not exceed the critical value. Specially shaped grooved outer
surface, significantly increases the stability of the connection between profile and panel.
Advantages of BSP Floor to Floor system:
• Reduced number of brackets significantly reduces thermal bridges.
• Reduced number of brackets reduces installation time.
• Mounting brackets to the bearing structure of the building (usually reinforced concrete) makes installation
easier and allows using standard expansion anchors instead of expensive chemical anchors.
52.0
2.0
90.0
2.0
49.0120.0
61.0
42.0
www.bspsystem.com36
Alu
min
um
Bra
ck
et
Sy
ste
mPRODUCTS
Floor to Floor BSP System
Sections and models
Span
bet
wee
n sl
abs
Span
bet
wee
n sl
abs
Fig. 3 - 3D Model
Fig. 4 - The floor section
Fig. 5 - Internal and external detailed solution
www.bspsystem.com 37
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A B
Bracket BSP Type KWD/85-60 85 60
Bracket BSP Type KWD/85-80 85 80
Bracket BSP Type KWD/85-100 85 100
Bracket BSP Type KWD/85-120 85 120
Bracket BSP Type KWD/85-140 85 140
Bracket BSP Type KWD/85-160 85 160
Bracket BSP Type KWD/160-60 160 60
Bracket BSP Type KWD/160-80 160 80
Bracket BSP Type KWD/160-100 160 100
Bracket BSP Type KWD/160-120 160 120
Bracket BSP Type KWD/160-140 160 140
Bracket BSP Type KWD/160-160 160 160
Bracket BSP Type KWD/A-B
Profile for non standard cladding material
Bracket for timber framework
PRODUCTS
Additional substructure elements
Profile BSP Type KWRK
lx 4,3421 cm4 ly 18,992 cm4
Wx 1,195 cm3 Wy 3,837 cm3
Field 3,024 cm2 Mass 0,819 kg/m
b
ssttaannddaarrdd ccllaaddddiinnggggg mmaatteerriiaall
NEW
www.bspsystem.com38
Alu
min
um
Bra
ck
et
Sy
ste
m
Description A B C Th* L
Profile omega BSP Type RW2 A 30 25 15 2,0
ON REQU-
EST
Profile omega BSP Type RW2 B 40 15 25 1,8
Profile omega BSP Type RW2 C 50 50 30 2,0
Profile omega BSP Type RW2 D 50 30 20 2,0
Profile omega BSP Type RW2 E 60 15 20 2,0
* Thickness
PRODUCTS
Additional substructure elements
Profile Type Omega
Profile BSP Type RW2
15 30 15
60
2
25
60
3015 15
25
2
30
90
20 50
2
50
90
20
2
30
15
100
6020
2
60
100
20
2
15
2.5
96
50
502
36
50
3696
50
2,5
2
40
15
25
1,8
The range of RW2 profiles are designed for mounting panels on walls where only very small vertical deviation occurs.
RW2D
RW2E
RW2B
RW2A
RW2C
ON
REQUEST
ON
REQUEST
www.bspsystem.com 39
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
Supporting system BSP Type KCS
System for supporting ceramic tiles and stone panels System KSC was designed for fixing ceramic tiles, stone and glass. This system allows the mounting panels of different thic-
kness due to regulation seal. Specially designed guideway in vertical profiles make the hanging hooks easy to fix and ensure
their straightness.
No Description
1 Vertical profil T BSP Type KCT
2 Vertical profil L BSP Type KCL
3 Edge hook for supporting ceramic tiles and stone panels BSP Type KC1
4 Middle hook for supporting ceramic tiles and stone panels BSP Type KC2
NEW
PRO
FIL
BSP
TYP
KCT
Bracket BSP Type KW1 Bracket BSP Type KW1
Ston
e pa
nels
Cera
mic
tile
s
PRO
FILE
BSP
TYP
E KC
T
www.bspsystem.com40
Alu
min
um
Bra
ck
et
Sy
ste
m
System for supporting glass panels
Nr Description
1 Vertical profil T BSP Typ KCT
2 Vertical profil L BSP Typ KCL
3 Egde hook for supporting glass panels BSP Typ KC3
4 Middle hook for supporting glass panels BSP Typ KC4
NEW
PRO
FILE
BSP
TYP
E KC
T
Gla
ss p
anel
s
PRODUCTS
Supporting system BSP Type KCS
Bracket BSP Type KW1
Brac
ket B
SP T
ype
KW1
www.bspsystem.com 41
Alu
min
um
Bra
ck
et
Sy
ste
m
PRODUCTS
System “BSP Solar” for solar panels fixing on façade
BSP Solar System is dedicated to mount of solar panels or collectors on the building walls, such
as ventilated façade. The system allows independent installation of solar panels, as well as
their harmonious incorporation into a ventilated façade among standard cladding panels.
The system can be applied to fix all types of solar panels and collectors designed to operate in the vertical
position.
Advantages of horizontal installation of solar panels as a façade in comparison to traditional roofing
installation:
• Increased solar coverage, which is the percentage of energy supplied by the solar panels in relation to the
energy demand, depending on the insolation quantities of the collectors and the size of the storage tank.
• Continuous cooling by the air flow circulation (chimney effect) in the ventilation gap between the solar
panel and the wall of building.
• Easy access to the panels to remove impurities that cause efficiency loss.
• No risk of snow cover and full efficiency in the winter.
• A smaller distance between the collector and the storage tank, usually placed in the boiler room on the
ground floor.
For the details please go to www.bspsystem.com
W3 - fix point
W3 - fix point
W2 - sliding point
www.bspsystem.com42
Alu
min
um
Bra
ck
et
Sy
ste
m
When high aesthetic of corners at the junction of cladding pa-nels is required, decorative profi-les are used to mask the joints.
12
2
2
7414
Internal corner profile
External corner profile
Joint profile
Closing profile Joint profile
Joint profiles are used to mask the gaps between panels in public spaces, as solution against acts of vandalism (eg, throwing cigarette butts).
Profile BSP Type KWN1
Profile BSP Type KWF1
Profile BSP Type KWF2 Profile BSP Type KWF3
Profile BSP Type KWN2
PRODUCTS
Decorative profiles
30
6
3 45o
12
35
811
12
40
128
182
12
2
62
94
2012
www.bspsystem.com 43
Alu
min
um
Bra
ck
et
Sy
ste
m
EXAMPLES AND CALCULATION
Fixing systems for ventilated façades
Aluminum substructure BSP - examples of applications
Horizontal brackets BSP - examples of applications
A wide range of regulation (+/-20 mm) helps to avoid problems with the tolerance of wall construction.
The use of substructure in horizontal position, reduces cost of the façade when narrow
horizontal panels are to be fixed.
www.bspsystem.com44
Alu
min
um
Bra
ck
et
Sy
ste
mEXAMPLES AND CALCULATION
Fixing systems for ventilated façades
Exemplary assembly scheme
Thermal insulationThermal insulation
EPDM thermal insulation padFaçade profile
Thermal insulation
Cladding panel
BSP bracket KW1
Fixing screw
Painted rivet Al/A2
BSP Aluminum profile KWR2
BSP Aluminum profile
BSP Aluminum profile
BSP Aluminum profile
Thermal insulationCladding panel
EPDM thermal insulation pad
Fixing anchorBSP bracket KW1Fixing screwPainted rivet Al/A2
Painted rivet Al/A2
Painted rivet Al/A2
Painted rivet Al/A2
Cladding panel
Profile BSP Type KWN1
Thermal insulationCladding panelEPDM thermal insulation pad
Fixing anchorBSP bracket KW1
Fixing screwPainted rivet Al/A2BSP Aluminum profile
Cladding panel
Fixing screwPainted rivet Al/A2
BSP Aluminum profile
BSP bracket KW1Fixing anchorEPDM thermal insulation pad
Profile BSP Type KWN2
EPDM thermal insulation padFixing anchorBSP bracket KW1Fixing screw
EPDM thermal insulation pad
Fixing anchor
Cladding panel
Thermal insulationFixing anchor
BSP bracket KW1
Fixing screw
BSP Aluminum profile
Painted rivet Al/A2
Cladding panel
BSP Aluminum profile
Waterproofing
EPDM thermal insulation pad
Roughcast Thermal insulation
Cladding panel
BSP Aluminum profilePainted rivet Al/A2
Fixing screwBSP bracket KW1
Fixing anchor
EPDM thermal insulation padFixing anchor
BSP bracket KW1
Fixing screw
Thermal insulation
www.bspsystem.com 45
Alu
min
um
Bra
ck
et
Sy
ste
m
EXAMPLES AND CALCULATION
Fixing systems for ventilated façades
Exeplary subconstruction layout
Examples of load calculations
The bending moments [KNm] The side elevation - Area A • building dimensions: d = 90,0 m, b = 32,0 m, h = 18,0 m• dimension e= min(b,2•h) = 32,0 m • • • • • • • •
• • • • •
www.bspsystem.com46
Alu
min
um
Bra
ck
et
Sy
ste
m
Design services
ADDITIONAL SERVICES
Design and assistance
Depending on the customer`s profile BSP offers the following services:
For Architects
• Project of ventilated facade
• Development of detailed technical drawings of substructure
• Development of custom tailored design solutions
• Technical analysis of projects
• Static calculations of supporting substruction
• Advice on the selection of building materials and minimizing costs
• Intermediaries between customer and manufacturers of building materials
• Design assistance
For General Contractors
• Project of ventilated facade
• Development of alternative design solutions
• Project calculations
• Panel cutting optimization
• Bill of materials, together with the implementation of a cost estimate
• Advice on the selection of building materials for minimizing costs
• Intermediaries between customer and manufacturers of building materials
• Consulting in the selection of Contractors
• Supervision and coordination
• Technical and design support
For Installers
• Opimized layouts
• Project calculations
• Panel cutting optimization
• Preparing Bill of Material
• Advice on the selection of building materials for minimizing costs
• Help in project agreements with the general Contractor and/or architect
• Supervision and coordination of installation
• Technical assistance
For Building Material Producers
• Detailed technical drawing development
• Technical support and training
• Advice on architects and Contractors selection
• Advice on individual technical solutions
Other services:• Powder coating from RAL color card
• Anodizing
• Custom tooling
• Metal case with exemplary BSP system products
www.bspsystem.com 47
Alu
min
um
Bra
ck
et
Sy
ste
m
• IKEA Retail Park Targowek - Warsaw - façade surface: more than 1000 m2, General Contractor „KARMAR S. A.”
• RTV Euro AGD - Warszawa, General Contractor „KARMAR S. A.”
• Apartment and services complex Zabłocińska str. Warsaw, General Contractor „TYNKBUD-1 Sp. z o. o.”
• Apartment and services complex Wańkowicza str. Warsaw, General Contractor „TYNKBUD-1 Sp. z o. o.”
• Construction of the Louis Armstrong Municipal Amphitheatre in Iława, General Contractor Iławskie Przedsiębiorstwo Budowlane „IPB” Sp. z o. o.
• „Zink Power Wielkopolska” in Krągola near Konin - façade surface: more than 1000 m2, General Contractor „TULCON S. A.”
• Modular kindergarden building Św. Hieronima str. in Warsaw, General Contractor „PREFABRYKA Sp. z o. o.”
• Modular kindergarden building Turmoncka str. Warsaw, General Contractor „PREFABRYKA Sp. z o. o.”
• Apartment complex Jesiennych Liści str. Warsaw, General Contractor Generalny Wykonawca firma „ALISMA CONSTRUCTION S. A.”
• Sports hall Legionowo, General Contractor „MOSTOSTAL WARSZAWA S. A.”
• Office building „Oxygen”Malczewskiego str. Szczecin, General Contractor „EIFFAGE BUDOWNICTWO MITEX S. A.”
• Apartment complex Międzyborska str. Warsaw, General Contractor „TYNKBUD-1 Sp. z o. o.”
• Apartment complex Wyścigowa str. Warsaw, General Contractor „UNIBEP S. A.”
• Museum of Contemporary Art in Krakow - façade surface: more than 1500 m2, General Contractor „Warbud S. A.”
• Apartment building Malcanowo, Private investor
• Stadium Arka in Gdynia, General Contractor „Budimex-Dromex S. A.”
• Sports center Wielka Krokiew Zakopane, General Contractor „Budimex-Dromex S. A.”
• Philharmonic Hall Kielce, General Contractor „Unibep S. A. i Unimax S. A.”
• Service building for subway station Kabaty, General Contractor „Budimax-Dromex S. A.”
• Building of Institute of Aviation Warsaw - façade surface: more than 1000 m2, General Contractor „Dorbud S. A.”
• Storage-office building - Sobiekursk near Karczewo, General Contractor „Pro-Bud S. A.”
• Apartment-commercial building Warszawska str. Kielce, General Contractor „Nowbud”
• Apartment complex Argentyńska str. Warsaw - façade surface: more than 1000 m2, General Contractor „ALISMA CONSTRUCTION S. A.”
REFERENCES
Excerpt from reference list
www.bspsystem.com48
Alu
min
um
Bra
ck
et
Sy
ste
m
• Storage-office building Annopol str. Warsaw, General Contractor „Hochtief Polska S. A.”
• Apartment complex „Saska” Warsaw, General Contractor „UNIBEP S. A.”
• Apartment complex Parkowa str. Krakow, General Contractor „PRZ w Krakowie S. A.”
• Apartment building Puławski astr. Piaseczno, General Contractor „ALISMA CONSTRUCTION S. A.”
• Office building Bysławska Warsaw - façade surface: more than 2500 m2, Investor: Mera Pnefal S. A.
• Individual house Spartańska str. Warsaw, Private investor
• Individual house Komorów, Private investor
• Interior cladding of tunnels at Chopin Airport Warsaw, General Contractor „PeKaBud”
• ASP Academy of Fine Arts Łódź - façade surface: more than 3000 m2, General Contractor „Budimex”
• Apartment building Serocka str. Warsaw, General Contractor „Tryboń”
• Theater Suwałki - façade surface: more than 1000 m2, Contractor „A&D Suwałki”
• Apartment complex Mozaika Mokotow Warsaw - façade surface: more than 1000 m2, General Contractor „UNIBEP S. A.”
• Shopping Center Jantar in Słupsku - façade surface: more than 5000 m2, Contractor „Termatex”
• Faculty of Phisics (CENT II) UW in Warszawa - façade surface: more than 2000 m2, General Contractor „Karmar S. A.”
• Cotex Office Center in Płock - façade surface: more than 4000 m2, Investor „Budoplan”
• Construction of production plant Weyerhaeuser in Gdańsk, General Contractor „Budimex”
• Olecko District Court building, General Contractor „Skanska”
• University Hospital in Białymstok - façade surface: more than 6000 m2, General Contractor „Budimex”
• „Konstruktorska Business Center” Warszawa - total façade surface more than 4000 m2, General Contractor „HB Reavis Construction PL Sp. z o. o.”
• Apartment complex IN CITY Siedmiogrodzka/Karolkowa str. Warsaw - more than 1500 m2, General Contractor „Unibep S. A.”
• Shipping center „Galeria Bursztynowa” - more than 6000 m2, General Constructor „INSTAL Białystok”
• IInstytut of Aviation - more than 2000 m2, General Contractor „SKANSKA”
• Banach Hospital General Contractor „WARBUD”
REFERENCES
Excerpt from reference list
www.bspsystem.com 49
Alu
min
um
Bra
ck
et
Sy
ste
m
• Warsaw Underground - 2nd line - toilet cabins - HPL more than 2000 m2 General Contractor „AGP”
• Warsaw Underground - 2nd line - ventilation screens - HPL more than 5000 m2 General Contractor „AGP”
• Office building Szczytno - more than 1000 m2
• Office Building Ericpol Łódź - more than 2000 m2 Contractor „Widok”
• Office Building Nimbus Office Warsaw Al. Jerozolimskie - more than 2000 m2 General Contractor „Strabag”
• Hospital in Sosnowiec - more than 1000 m2
• Building of Municipality in Suwałki - more 1000 m2 General Contractor „Bcomplex”
• Apartment building Bobrowiecka street in Warsaw - more than 2500 m2 General Contractor „Pribo Suwałki”
• Buildings: „Apartamenty przy Operze” Białystok - more than 1000 m2 General Contractor „FAD-BET Białystok”
• Chain Stores ALDI - more than 500 m2 General Contractor „EMG Europe Investment & Partners”
• Sports and entertainment hall in Lubin - more than 3000 m2 General Contractor „PANPOL”
• Transformer Station in Katowice - do more than 2000 m2
• Apartment Complex “Młyny Królewskie” Warsaw, Ostroroga str. - more than 1000 m2 General Contractor „HenpoI”
• Pomerania Logistic Center (PCL) Gdańsk - over 3000 m2 General Contractor „Doraco” Gdańsk; Contractor „Bausan Aluminium”
• Apartament complex „Garnizon” Gdańsk - over 1000 m2 General Contractor „Hossa”
• Public Library Świecie - around 1000 m2 General Contractor „Solgrud”
• Private School Gdańsk - around 1000 m2 General Contractor „Rebel Concept”
• Swimming pool at Primary School Pruszcz Gdański - around 800 m2 General Contractor „Budrem”
• Hotel Przystań Olsztyn - around 700 m2 General Contractor „Przemysłówka PBP Holding”
• Building of Politechnika in Gdańsk General Contractor „Hartuna”
• Technical Inspection Authoriry (UDT) Białystok - over 1000 m2 General Contractor „Skanska S. A.”
• Hajnowka Shopping Centre - over 1300 m2 General Contractor „Budimex S. A.”
• Vis a Vis Shopping Centre Łodź - ponad 1000 m2 General Contractor „Budimex S. A.”
• Apartamenty przy Krasińskiego 41, Warszawa - ok. 800 m2 General Contractor „Fort Budownictwo Sp. z o. o.”
REFERENCES
Excerpt from reference list
www.bspsystem.com50
Alu
min
um
Bra
ck
et
Sy
ste
mREFERENCES
Photographs of selected objects
Sports hall in Legionowo
Museum of Contemporary Art in Krakow
Construction of the Louis Armstrong Municipal Amphitheatre in Iława
Office Building Mera Pnefal S.A. Warsaw
IKEA Retail Park Targowek - Warsaw
RTV Euro AGD - Warsaw
Office building of the Institute of Aviation in Warsaw
Apartment complex - Zabłocińska str. in Warsaw
www.bspsystem.com 51
Alu
min
um
Bra
ck
et
Sy
ste
m
REFERENCES
Photographs of selected objects
Interior cladding of tunels at Chopin Airport Warsaw
Apartment complex Wyścigowa str. Warsaw
Apartment-commercial complex Wańkowicza str. Warsaw
Residential building Argentynska str. Warsaw
Apartment complex Mozaika Mokotow Warsaw
Apartment building Serocka str. in Warsaw
Apartment complex „Saxon” in Warsaw
Apartment buildings Wilanow str. in Warsaw
BSP Bracket System Polska Ltd.
ul. Stanisława Augusta 73 lok. 17
03-846 Warszawa
+48 22 243 09 70, +48 22 428 22 63
e-mail: [email protected]
www.bspsystem.com
Our partners
EUROPEAN UNION
EUROPEAN REGIONAL DVELOPMENT FUND
Vers
ion
01/2
015