aluminum pipe structure series additional items 2018 · s 19㎜/ 0.74” 10.8 kgf / 24 lbf n 28㎜/...
TRANSCRIPT
Index
Introduction ------------------------------------ 04
Overall Contents ----------------------------- 07
GF-N Aluminum Pipe Structural ---------- 08
GF-G Aluminum Pipe Structural ---------- 20
GF-S Aluminum Pipe Structural ---------- 21
GF Motion ------------------------------------- 24
GF Other --------------------------------------- 25
Index -------------------------------------------- 26
Contact ----------------------------------------- 27
S
19㎜ / 0.74”
10.8 kgf / 24 lbf
N
28㎜ / 1.1”
48.7 kgf / 108 lbf
G
43㎜ / 1.69”
108.7 kgf / 240 lbf
Light
Weight
High
Rigidity
Green Frame is the basic material used to build all of the structures found in the Ready Solution Catalog. It optimizes the balance between rigidity and weight, making it 60% lighter than welded steel and 20% stronger than resin coated steel piping. Thanks to an alumitetreatment, Green Frame is also highly resistant to rust, scratches, and dust.
Green Frame
Each connector is affixed with a single, dedicated bolt designed to produce a right angle and parallel lines along the notched profile. In trials, new users assembled a GF structure up
to 67% faster than the same structure using another modular system. Green Frame connectors make minor or major adjustments quick and easy, saving time and manpower.
Advanced Connections
Full modularity
Dedicated bolt
90º angles
Parallel lines
4
Green Frame is the ideal choice for work sites seeking to reduce their impact
on our environment. SUS’s Fukushima location recycles retired frames and
connectors back into new extrusions, saving energy and resources. In
addition, the material’s inherent light weight compared to steel means less impact during transport, and its resistance to rust and scratches combined
with its high modularity means more repurposing and less waste.
Truly Green
Aluminum is approximately 33% the mass of steel.
Because most of the connectors are also aluminum,
GF structures are easy to build and maneuver. This
reduces strain on operators and improves ergonomics.
Lightweight
The alumite-coated GF Series was tested by exposing
it to water and keeping the components in high-
humidity. In the test, GF far outlasted steel exposed
to the same conditions.
Lasting Finish
The amount of electricity used to refine a recycled
aluminum ingot is only 3% of that needed for a new
one. GF frames and connectors are 99% recyclable,
minimizing energy consumption and environmental impact.
Reduced Carbon Footprint
GF frames and connectors easily answer the
demands of evolving work environments. Change a
structure’s orientation, adjust it to suit different
operators, or completely repurpose it for a new use.
Reusable
–Aluminum– –Steel–
Normal
Alumite
A type
compound
coating
5
Motion, Page 24
Intermittent Stopper for Small Load L
NameIntermittent Stopper for Small Load L
Fixed Length (l=800>a>230mm)
Item No. GFK-925
GF-N GF-G GF-S
Frame P.08~
Connector P.08~ P.20~ P.21~
28 mm Type 43 mm Type 19 mm Type
Accessory
Part
GF-N P.10~
GF-S P.22~
Foot
Component
Part
GF-N P.15~
GF-G P.20~
Corocon GF-N P.18~
Moving
Part
GF-N P.19~
GF-S P.23~
Motion P.24~
Other P.25~
Aluminum Pipe Structural Overall Contents
7
Φ38 PVC Pipe
■ Material/Technical Data
Material : Polyvinyl Chloride
Weight : 518 g/m
Environment : RoHS Compliant
● Compatible with Green Frame N
Name Φ38 PVC Pipe L = 100-4000mm
Item No. GFA-820
Hexagon High Bolt
M6x18
Hexagon High Bolt
M6x18
Hexagon High Nut M6 Hexagon High Nut M6
Ball Φ21
The neck has a
square shape
Square
How to Differentiate
Hexagon Aluminum High Bolt M6.5 x 18
Hexagon Aluminum Tapered Nut M6.5
Use with the Cross
Connector (GFJ-A11 A)
Point Connector Cross
● The Point Connector Cross reinforces the connection
between the frame and the orthogonally connected
Cross Connector (GFA-A11A).
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Aluminum
Weight : 97 g
Environment : RoHS Compliant
■ Strength Data
Sliding Load : 1000(N)Moment Load (vertical) : 15(N・m)
Moment Load (horizontal) : 26(N・m)
Torque:11(N・m)
● Use in conjunction with the Cross
Connector (GFJ-A11 A).
Name Point Connector Cross
Item No. GFJ-D02
Alu
min
um
Pip
e S
tru
ctu
ral
GF
28 mm
GREEN FRAME
GF-N 28 mm Type
Connector
Frame
Free Connector Inner Type V-M1
● Free determination of the mounting angle.
● Due to the square shape of the neck it can only be moved
in a fan-shape.● The Free Connector remains adjustable even when the
bolt is tightened.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Steel
Weight : 108 g
Environment : RoHS Compliant
● Capable of gripping a GF-G (43mm)
frame.● Please apply oil when using for
movement.
Name Free Connector Inner Type V-M1
Item No. GFJ-B91
8
Connector
Straight Connector Outer Type
● Use when connecting with the end of a frame.
● Attaching the drill screw to the recessed part
will prevent the frame from coming out.● Φ35 is recommended for punching holes. Please
use this to increase pulling power.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Aluminum
Weight : 38 g
Environment : RoHS Compliant
■ Strength Data
Pull-Out Load : 1000(N) with screw
Pull-Out Load : 420(N) without screwMoment Load : 5(N・m)
● Recommended screw: Pan Head Drill
Screw (SFB-X96) 4 x 10 (trivalent
chromium plating).
Name Straight Connector Outer Type
Item No. GFJ-D13
Multi Connector (Outer) R
● The frame can be fixed at any point of rotation. Use on frames that are not compatible
with inner type connectors.● Attaching the screw drill to the recessed part will prevent the frame from coming out.
● Φ35 is recommended for punching holes. Please use this to increase pulling power.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Aluminum
Weight : 51 g Environment : RoHS Compliant■強
■ Strength Data
Sliding Load : 800(N)
Pull-Out Load : 1200(N) with screw
Pull-Out Load : 300(N) without screwMoment Load (vertical) : 11(N・m)
Moment Load (horizontal) : 5.5(N・m)
Tightening Torque : 11(N・m)
● Also capable of connecting GF-G
(43mm) frame.● Recommended screw: Pan Head Drill
Screw (SFB-X96) 4 x 10 (trivalent
chromium plating).
Name Multi Connector (Outer) R
Item No. GFJ-D17
Hexagon Socket Aluminum High Bolt M6.5 x 22
Hexagon Aluminum Tapered Nut M6.5
Hexagon Socket Aluminum High Bolt M6.5 x 22
Hexagon Aluminum Tapered Nut M6.5
Straight Connector Inner
● Use when connecting with the end of a frame.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Aluminum
Weight : 63 g
Environment : RoHS Compliant
■Strength Data
Pull-Out Load : 420(N)Moment Load : 5(N・m)Tightening Torque : 11(N・m)
Name Straight Connector Inner
Item No. GFJ-D01
The Straight Connector (GFJ-A17, 10 mm)
dimensions are different.
Connector
Frame
Hexagon Aluminum High Bolt M6.5 x 18
Hexagon Aluminum Tapered Nut M6.5
GF-G43 mm
GF-S19 mm
GF Motion
GF Other
Index
GF-N28 mm
Frame
Foot Component
Corocon
Moving Part
Connector
Accessory
Contact
9
Name Plate Cover L=1,550mm
● This type of cover snaps into place on the frame profile notches
■ Material/Technical Data
Material : ABS
Weight : 59 g (1,550mm)
Environment : RoHS Compliant
● May also be used with
GF-G (43mm type) Frame
Name Name Plate Cover L=1,550mm
Item No. GFA-807
GF Hard Frame Inner Cap
● This cap can only be used with Green Frame Hard (GFF-019).
■ Material/Technical Data
Material : Low Density Polyethylene
Weight : 3 g
Environment : RoHS Compliant
Name GF Hard Frame Inner Cap
Item No. GFA-425
Accessory
GF-SF Connector Long
● The GF-SF connector remains adjustable even after tightening the bolts.
■ Material/Technical Data
Material : Body: Aluminum
Bolt/Nut : Steel
Weight : 41g (S Slot Long Kit)
47g (S Slot Long G Kit)
59g (L Slot Long G Kit)
Environment : RoHS Compliant
● For more information on SF frames,
please refer to the SF Catalog
Name GF-SF Connector Long
S Slot Long Kit S Slot Long G Kit L Slot Long G Kit
Item No. GFA-615 GFA-617 GFA-613
Green Frame
SF Frame
Easy Nut L (M6)
Hexagon socket head
cap bolt M6x14Hexagon socket head
cap bolt M6x10
Easy Nut S (M6)Easy Nut S (M6)
Hexagon socket head
cap bolt M6x10
Name Plate Base
Name Plate Cover
Name Plate
CoverName Plate
Base
S Slot Long S Slot Long G L Slot Long G
Alu
min
um
Pip
e S
tru
ctu
ral
GF
28 mm
GREEN FRAME
GF-N 28 mm Type
10
Parts Container
● Use the part connector to hook onto Green Frame F35/F50.
■ Material/Technical Data
Material : Polypropylene
Weight : 100 g
Environment : RoHS Compliant
Name Parts Container
Item No. GFA-A50
Accessory
Parallel Connector Flat Outer
● Attach this connector to the frame and then attach the panel.
■ Material/Technical Data
Material : Polypropylene
Weight : 4 g
Environment : RoHS Compliant
■ Products Included
M5 Square Nut
Name Parallel Connector Flat Outer
Item No. GFJ-B49
Steel Idler Support Kit B
● This is a convenient kit for using the Iron Idler (GFW-239).
■ Material/Technical Data
Material : Body: Stainless
Connector Piece : Aluminum Extrusion
Idler/Bolt/Washer : Steel
Weight : 91 g
Environment : RoHS Compliant
Load Capacity : 200N
■ Products Included
Wire Support x 1
Washer x 1
Connector Piece Compact Side x 1
Bolt x 1
Resin Idler x 1
Spacer x 1
Name Steel Idler Support Kit B
Item No. GFK-958
SpacerWire Support
Washer
Resin Idler
Connector Piece –
Compact Side
Hexagon
socket
head bolt
M6 x 30
GF-G43 mm
GF-S19 mm
Index
GF-N28 mm
Frame
Foot Component
Corocon
Moving Part
Connector
Accessory
GF Motion
GF Other
Contact
11
Resin Idler Support Kit B
● This is a convenient kit for using the Resin Idler (GFA-A30).
■ Material/Technical Data
Material : Body: Stainless
Connector Piece: Aluminum Extrusion
Idler: Resin
Bolt/Washer: Steel
Weight : 56 g
Environment : RoHS Compliant
Load Capacity : 30N
■ Products Included
Wire Support x 1
Washer x 1
Connector Piece Compact Side x 1
Bolt x 1
Resin Idler x 1
Spacer x 1
Name Resin Idler Support Kit B
Item No. GFK-960
Resin Idler Support Kit A
● This is a convenient kit for using the Resin Idler (GFA-A30).
■ Material/Technical Data
Material : Body: Stainless
Connector Piece: Aluminum Extrusion
Idler: Resin
Bolt/Washer: Steel
Weight : 56 g
Environment : RoHS Compliant
Load Capacity : 30N
■ Products Included
Wire Support x 1
Washer x 1
Connector Piece Compact x 1
Bolt x 1
Resin Idler x 1
Spacer x 1
Name Resin Idler Support Kit A
Item No. GFK-959
Leak Plate (50 pcs/pack)
● Put in between Frame and Connector to maintain the
performance of the conductivity area.
■ Material/Technical Data
Material : Stainless
Weight : 0.20 g/ea.
Environment : RoHS Compliant
Name Leak Plate (50 pcs/pack)
Item No. GFK-E00
Accessory
Compact
Connector
Piece
Wire Support
Washer
Resin Idler
Resin Idler
Spacer
Compact Side
Connector Piece
Wire Support
Washer
Hexagon
socket head
bolt M6 x 30
Leak Plate
Leak Plate
The drawing above shows conductivity in the frame
using two leak plates. Moreover, it can go to ground
from any frame when using the Ground Cable Kit.
Conductivity can occur when this
claw damages the anodized
coating and contacts the aluminum
material beneath.
Spacer
Alu
min
um
Pip
e S
tru
ctu
ral
GREEN FRAME
GF-N 28 mm Type
Hexagon Socket
head bolt M6 x 30
12
Green Frame (L=4,000mm) x 5 pcs
● This is the standard frame of the GF series. It is the most versatile 28mm type
which combines functionality and strength.
■ Material/Technical Data
Material : Aluminum Extrusion Alumite Treatment
Weight : 0.37 kg/m
Environment : RoHS Compliant
Section Secondary lx=1.16x10⁴mm⁴Momentum: ly=1.16x10⁴mm⁴
Section Coefficient: Zx=0.83x10³mm³
Zy=0.83x10³mm³
NameGreen Frame 5 pcs/pack (Silver)
Scale (effective length※ ℓ=4000mm) x 5 pcs
Item No. GFK-F00
Hinge P-L / R
● This hinge is used in the Resin Door Panel.
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Pin: Stainless
Weight : 123 g
Environment : RoHS Compliant
■ Products Included
T Nut S (M5) x 2Truss Head Screw M5 x 12 (trivalent chromate) x 2
Name Hinge P-L Hinge P-R
Item No. GFP-000 GFP-004
Accessory
● Corresponding Frame Caps
Inner Cap (GFA-400)
Inner Cap Hard (GFA-412)
Inner Cap Conductive (GFA-411)
Outer Cap (GFA-401)
Metal End Face Cap (GFA-414)
Green Frame End Cap (Gray) (GFA-427)
Green Frame End Cap (Red) (GFA-432)
This is an illustration
of Hinge P-R.
Hinge P-L
2-M5x12 Truss Screw
T Nut S (M5)
M6x12 Low head
bolt
T Nut S (M6)
This drawing is L
(when opening from
the left). For R (when
opening from the
right) the drawing
will be opposite.
Hinge F-L / R
● This hinge is used with the Frame + Door Frame.
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Pin: Stainless
Weight : 144 g
Environment : RoHS Compliant
■ Products Included
T Nut S (M6) x 2Truss Head Screw M6 x 12 (trivalent chromate) x 2
Name Hinge F-L Hinge F-R
Item No. GFP-005 GFP-007
This is an illustration
of Hinge F-R.
Hinge F-L
2-M6x12 Low head bolt
T Nut S (M6)
This drawing is L
(when opening from
the left). For R (when
opening from the
right) the drawing
will be opposite.
※ Effective Length
Standard scale showing the effective length.
GF-G43 mm
GF-S19 mm
Index
GF-N28 mm
Frame
Foot Component
Corocon
Moving Part
Connector
Accessory
GF Motion
GF Other
Contact
13
Catch for Frame with Switch
● The installation kit includes a magnet catch switch for the door frame.
● Magnet suction force is 29.4N
● Switch Spec: ON when closing door
■ Material/Technical Data
Material Body : Stainless
Connector Piece: Aluminum Extrusion
Idler : Resin
Bolt/Washer : Steel
Weight : 56 g
Environment : RoHS Compliant
Load Capacity : 30N
Includes : Wire Support x 1
Washer x 1
Connector Piece
Compact x 1
Bolt x 1
Resin Idler x 1Spacer x 1
● Please use with a Frame Catch
Name Catch for Frame with Switch
Item No. GFQ-004
GF Slip-joint Hinge L / R
● Use as a hinge in a door.
● Use with an area guard.
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Pin : Stainless
Weight : 90 g
Environment : RoHS Compliant
Name GF Slip-joint Hinge L GF Slip-joint Hinge R
Item No. GFP-012 GFP-013
Accessory
This is an illustration of
GF Slip-Joint Hinge R.
Green Frame
Vertical Door Frame
Green Frame G
Pillar
This drawing is L
(when opening from
the left). For R (when
opening from the
right) the drawing
will be opposite.
M6x12 Low Head Bolt
Hexagon Nut Thin Type
Hexagon Socket Button Bolt 6x20
2-M4x22 Bolt
2-M6x20 Flat Bolt
Hexagon Nut
Φ48 Wire Support Kit
● This support kit prevents the φ48 Idler from coming off.
■ Material/Technical Data
Material : Body/Nut: Stainless
Bolt/Washer: Steel
Weight : 30 g
Environment : RoHS Compliant
■ Products Included
Φ48 Wire Support x 1
Flat Washer M6 small, round x 1
Hexagon Socket Head Bolt M6x30 x 1
ST Nut L (M6) x 1
● Φ48 Idler not included.
Name Φ48 Wire Support Kit
Item No. GFK-956
Wire
■ Material/Technical Data
Material : Install Area: Aluminum Extrusion
Magnet: Ferrite
Housing: PBT
Weight : 195 g
■ Products Included
Connector Piece L x 4
Limit Plate L x 1
Catch Piece L x 1
Magnet Catch w/ Limit x1
Hexagon Socket Bolt M4x22 (trivalent
chromate) x 2
Cross recessed countersunk machine
screw M6 × 20 (trivalent chromate) × 2
Hexagon Socket Button Bolt M6x20
(trivalent chromate) x 1
Flat Washer M4 (trivalent chromate) x 2Hex Nut M6 (Type 1) (trivalent chromate) x 3
Hex Nut M6 (Type 3) (trivalent chromate) x 1
Hexagon Socket Bolt M6x12 (trivalent
chromate) x 1
Alu
min
um
Pip
e S
tru
ctu
ral
GF
28 mm
GREEN FRAME
GF-N 28 mm Type
14
L Slot Connector Piece L50mm
● Installation of multi connector etc. can be done by inserting the Long Type (50mm)
into the groove of the L slot.
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Bolt: Steel
Weight : 41 g
Environment : RoHS Compliant
■ Products Included
L Slot Connector Piece L50 x 1
Hexagon Socket Head Bolt M5x15x 2
T Nut L (M5) x 2
Name L Slot Connector Piece L50mm
Item No. GFA-B37
Free Caster Φ75 with Brake (Rubber)
● Insert into the frame directly and tighten with a Thin Spanner.
The rubber will crimp to the frame to lock in place.
■ Material/Technical Data
Material : Body: Steel
Wheel: Rubber
Size : φ75
Weight : 352g
Environment : RoHS Compliant
Load Capacity : 400N
Spanner Size : 21
L : 47mm
H : 101mm
E : 29mm
● Compatible Frames
Green Frame (GFF-000)
Green Frame F35 (GFF-014)
Green Frame F50 (GFF-005)
Green Frame W (GFF-003)
Green Frame Slide (GFF-006)
Green Frame P100 (GFF-001)
Name Free Caster Φ75 with Brake (Rubber)
Item No. GFN-527
Accessory
2-MS Taper hole
Hexagon Socket Bolt M5x15
L Slot Connector Piece L50
T Nut L (MS)
Frame Caster Φ100
● Insert into the Frame directly and tighten with a Thin Spanner.
The resin will crimp to the Frame to lock in place.
■ Material/Technical Data
Material Body: Aluminum Extrusion
Pin : Stainless
Weight : 90 g
Environment : RoHS Compliant
NameFrame Caster Φ100
with Brake
Frame Caster Φ100
Item No. GFN-505 GFN-506
■ Material/Technical Data
Material : Body: Steel
Wheel: Rubber
Size : φ100
Weight : 650g (GFN-506)
719g (GFN-505)
Environment : RoHS Compliant
Load Capacity : 500N
Spanner Size : 21
L : 47mm
H : 132mm
E : 32mmFrame Caster
Thin Spanner
for Caster
● Compatible Frames
Green Frame (GFF-000)
Green Frame F35 (GFF-014)
Green Frame F50 (GFF-005)
Green Frame W (GFF-003)
Green Frame Slide (GFF-006)
Green Frame P100 (GFF-001)
Foot Component
Frame Caster
Thin Spanner
for Caster
GF-G43 mm
GF-S19 mm
Index
GF-N28 mm
Frame
Foot Component
Corocon
Moving Part
Connector
Accessory
GF Motion
GF Other
Contact
15
Frame Caster Φ75 (Conductive)
● Insert into the Frame directly and tighten with a Thin Spanner.
The rubber will crimp to the Frame to lock in place.
■ Material/Technical Data
Material : Body: Steel
Wheel: Conductive
Size : Φ75
Weight : 316g
Environment : RoHS Compliant
Load Capacity : 240N
Spanner Size : 19
L : 47mm
H : 101mm
E : 29mm
Name Free Caster Φ75 (Conductive)
Item No. GFN-530
Foot Component
Frame Caster
Thin Spanner
for Caster
Free / Fixed Casters Φ75
Item Name Item No.Weight
(g)
Load
Capacity
Wheel
Material
X
(mm)
Y
(mm)
A
(mm)
B
(mm)
H
(mm)
P
(mm)
E
(mm)
Free Caster Φ75 with Brake GFN-532 630
600N Rubber
55 42 70 58 93 8.8 28
Fixed Caster Φ75 GFN-550 306
Free Caster Φ75 (Urethane) GFN-540 610
800N UrethaneFree Caster Φ75 with Brake (Urethane) GFN-533 630
Fixed Caster Φ75 (Urethane) GFN-551 260
■ Material/Technical Data
Material : Body: Steel
Environment : RoHS Compliant
Free Caster Fixed Caster
● Install in Green Frame L Slot
with the T Nut and Bolt:
ST Nut L M8 (SKF-T11S)
Hexagon Socket Head Cap
Bolt M8x15 (SFB-581S)
Flat Washer M8 small type
(SFB-5M8S)
4 of each for each wheel
● Compatible Frame
Green Frame L Slot (GFF-004)
Screw Shaft Casters Φ75
● This Caster is for the installation of a Foot Connector
or Adjustor Caster Connector, etc.
Item Name Item No. Weight (g)Load
Capacity
Wheel
Material
L
(mm)
H
(mm)
E
(mm)
Screw Shaft Caster Φ75 (Urethane) GFN-537 282
500N Urethane
25 95 29Screw Shaft Caster Φ75 with Brake
(Urethane)GFN-541 312
Screw Shaft Caster Φ75 (Conductive) GFN-526 316 240N Conductive
Foot
Connector
Example of Installation using Adjuster Caster Connector
● Compatible Connectors
Foot Connector M12 (GFN-E02)
Foot Connector M12
(Conductive) (GFN-E17)
Adjuster Caster Connector A
(GFN-C08)
Adjuster Caster Connector B
(GFN-C09)
Palette Connector (GFJ-A13)
Urethane Conductive
● Compatible Frames
Green Frame (GFF-000)
Green Frame F35 (GFF-014)
Green Frame F50 (GFF-005)
Green Frame W (GFF-003)
Green Frame Slide (GFF-006)
Green Frame P100 (GFF-001)
■ Material/Technical Data
Material : Body: Steel
Environment : RoHS Compliant
Alu
min
um
Pip
e S
tru
ctu
ral
GREEN FRAME
GF-N 28 mm Type
16
Foot Component
Free Caster Φ100 (Conductive)
● Install with a T Nut and bolt to the Green Frame L Slot.
■ Material/Technical Data
Material Body : Steel
Wheel : Conductive
Weight : 1054 g
Environment : RoHS
Compliant
Caster : without Brake
Name Free Caster Φ100 (Conductive)
Item No. GFN-546
■ Material/Technical Data
Material : Body: Steel
Wheel: Conductive
Weight : 1054 g
Environment : RoHS Compliant
Caster : without Brake
Load Capacity : 720N
X : 68mm
Y : 68mm
A : 90mm
B : 90mm
H : 132mm
P : 11mm
E : 35mm
● For installation in the Green Frame L Slot:
ST Nut L M8 (SKF-T11S)
Hexagon Socket Head Cap Bolt M8x18
(SFB-589S)
Flat Washer M8 (SFB-903S)
Spring Washer M8 (SFB-934S)
4 of each for each wheel
● Compatible Frame
Green Frame L Slot (GFF-004)
Frame Caster N Frame
● Insert into the Frame directly and tighten with a Thin
Spanner. The resin will be crimped to the Frame to lock in
place.
Item Name Item No. D (mm)Wheel
Material
Load
Capacity
L
(mm)
H
(mm)
E
(mm)
Weight
(g)
Frame Caster N Frame Φ50 Elastomer with Brake GFN-656 Φ50 Elastomer 300N 38.5 70 21 189
Frame Caster N Frame Φ75 High Load with Brake GFN-658
Φ75
Rubber 600N 58.5 98.5
28
494
Frame Caster N Frame Φ75 Nylon No Brake GFN-578 Nylon 400N 38.5 97 220
Frame Caster N Frame Φ100 Conductive No Brake GFN-584
Φ100
Conductive 500N
58.5 127.5 30
590
Frame Caster N Frame Φ100 Nylon with Brake GFN-587 Nylon 600N 520
Frame Caster N Frame Φ100 Urethane with Brake GFN-589 Urethane 600N 570
■ Material/Technical Data
Material : Body: Steel, Rubber
Environment : RoHS Compliant
Spanner Size : 21
● Compatible Frames
Green Frame (GFF-000)
Green Frame F35 (GFF-014)
Green Frame F50 (GFF-005)
Green Frame W (GFF-003)
Green Frame Slide (GFF-006)
Green Frame P100 (GFF-001)
Thin Spanner
Frame Caster Fixed Φ50 Rubber
● Insert into the Frame directly and tighten with a Thin Spanner. The rubber will crimp to the Frame to lock in place.
■ Material/Technical Data
Material Body : Steel
Wheel : Conductive
Weight : 1054 g
Environment : RoHS
Compliant
Caster : without Brake
Name Frame Caster Fixed Φ50 Rubber
Item No. GFN-621
■ Material/Technical Data
Material : Body: Steel, Rubber
Wheel: Rubber
Weight : 193 g
Environment : RoHS Compliant
Load Capacity : 300N
Spanner Size : 21
Length : 34.4mm
Height : 74mm
Caution: A connector
cannot be installed
in this area.
Foot Component
This has the same mounting method as the Frame Caster.
● Removing the washer (t = 4 mm) will
result in a height of 70 mm.
● Compatible Frames
Green Frame (GFF-000)
Green Frame F35 (GFF-014)
Green Frame F50 (GFF-005)
Green Frame W (GFF-003)
Green Frame P100 (GFF-001)
GF-G43 mm
GF-S19 mm
Index
GF-N28 mm
Frame
Corocon
Moving Part
Connector
Accessory
GF Motion
GF Other
Contact
17
Foot Component
Adjustor with Non-slip M8
■ Material/Technical Data
Material : Screw: SUS304
Seat: POM
Non-Slip Seat: Transparent
Polyurethane
Weight : 26 g
Environment : RoHS Compliant
Load Capacity : 490N
Name Adjustor with Non-slip M8
Item No. GFN-009
Corocon
Corocon (Adjustable Cut)
● Distance between the center of each wheel is 50mm.
■ Material/Technical Data
Material : Frame: Steel
Wheels: Polypropylene
Pin: Stainless Steel
Weight : 1.23 kg/m
Environment : RoHS Compliant
● Please order in increments of 50mm.
● Corresponding Corocon Hooks
Corocon Hook A (GFC-247)
Corocon Hook B (GFC-248)
Corocon Hook C (GFC-249)
Corocon Hook D (GFC-250)
Corocon Hook (Aluminum) (GFC-200)
NameCorocon (Adjustable Cut)
l=300~2950mm (in 50mm increments)
Item No. GFC-003
Corocon Hook Conductive A
■ Material/Technical Data
Material : Body: SPHC
Screw: Resin, Steel
Weight : 195 g
Name Corocon Hook Conductive A
Item No. GFC-222
Corocon Hook
Conductive
Thumb Screw
● This Adjustor has an anti-slip seat.
● The installation part and the knob
can rotate separately. Therefore it
is possible to adjust while installing.●When you wipe off the anti-slip seat
portion, some lubricant remains.
● Due to the oily nature of the trivalent
chromate treatment, there may be
some variation in the product, but this
does not affect quality.
● Corresponding Corocons
Corocon 3323P37 Conductive (GFC-033)
Corocon 3620P50 Conductive (GFC-021)
Alu
min
um
Pip
e S
tru
ctu
ral
GF
28 mm
GREEN FRAME
GF-N 28 mm Type
Leak
Plate
Earth
Cable Kit
Hexagon Nut
18
Linear Bush
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Guide: Resin
Bolt: Steel
Weight : 61 g
Environment : RoHS Compliant
Name Linear Bush
Item No. GFJ-B30
Adjust the looseness by
tightening or loosening
the bolt.
Moving Part
Φ2 Wire 5m
● Do not apply a tensile strength of more than 50kg to the wire.
● Please cut off the end of the wire as the length provided by
the factory will be slightly longer than the length described.● Use a Wire Cutter or Swaging Tool to cut the wire.
NameΦ2 Wire 5m
l=5m
Item No. GFW-249
■ Material/Technical Data
Material : Stainless Steel
Weight : 20 g/m
Environment : RoHS Compliant
Slot Roller L40 Light
● This Roller has a groove for a Green Frame L Slot or
SF Frame’s L Slot.
■ Material/Technical Data
Material : Body: Nylon6
Bearing: Steel
Weight : 59 g
Environment : RoHS Compliant
Load Capacity : 15 kg/ea.
Tightening Torque : 6.0N·m
Name Slot Roller L40 Light
Item No. SFA-809
Green Frame L Slot
Bearing
Color
GF-G43 mm
GF-S19 mm
Index
GF-N28 mm
Frame
Foot Component
Corocon
Moving Part
Connector
Accessory
GF Motion
GF Other
Contact
19
Frame Caster G Frame Φ125 Conductive with Brake
● Insert into the Frame directly and tighten with a Thin
Spanner. The rubber will crimp to the Frame to lock in place.
Name Frame Caster G Frame Φ125 Conductive with Brake
Item No. GFN-605
● Compatible Frames
Green Frame G (GFF-200)
Green Frame GW (GFF-207)
Green Frame G P150 (GFF-201)
■ Material/Technical Data
Material : Body: Steel, Rubber
Wheel: Urethane
Weight : 740 g
Load Capacity : 700N
Environment : RoHS Compliant
Length : 57mm
Height : 155mm
E : 39mm
Thin Spanner
Multi Connector Outer Type GH
● This Connector strengthens the moment load.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Steel
Weight : 244 g
Environment : RoHS Compliant
Name Multi Connector Outer Type GH
Item No. GFJ-031
Connector
Alu
min
um
Pip
e S
tru
ctu
ral
GF
43 mm
19 mm
GREEN FRAME
GF-G 43 mm Type
Foot Component
20
45-Degree Connector (Outer) S
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Steel
Weight : 19 g
Environment : RoHS Compliant
Name 45-Degree Connector (Outer) S
Item No. GFJ-035
GFS Frame
GFS Frame
Hexagon Socket Head Cap Bolt M5x15
Hexagon Nut M5
Connector
Cross Connector Rotate Type S
● The Cross Connector Rotate Type S makes it possible to
connect frames at a free angle
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Bolt/Nut: Steel
Weight : 38 g
Environment : RoHS Compliant
Name Cross Connector Rotate Type S
Item No. GFJ-B77
45-Degree
Connector Outer
Type N-S
GFN Frame
GFS Frame
Hexagon Socket Head Cap Bolt M5x15
Hexagon Nut M5
GFS Frame
GFS Frame
Cross Connector
Rotate Type SCenter of rotation
GREEN FRAME
GF-S 19 mm Type
GF-N28 mm
Index
GF-G48 mm
GF-S19 mm
Connector
Accessory
Moving Part
Foot Component
Connector
GF Motion
GF Other
Contact
45-Degree Connector Outer Type N-S
● Creates a 45-Degree angle between a GF-S (19mm) Frame and a GF-N (28mm) Frame
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut: Steel
Weight : 22 g
Environment : RoHS Compliant
Name 45-Degree Connector Outer Type N-S
Item No. GFJ-036
21
Panel Holder S (t=3)
● Attach the panel holder to the frame and then insert the panel.
■ Material/Technical Data
Material : Polypropylene
Weight : 56 g/m
Environment : RoHS Compliant
● For more information on panels,
please see the GF Digital Catalog
online at www.susamericainc.com
NamePanel Holder S (t=3)
Fixed Length (l=2000mm)
Item No. GFA-815G
Folding Connector S
● In addition to folding tables, this Folding Connector can be used
as a link in karakuri automation units.● In cases of repetitive motion, please apply lubricant to the hinge.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Pin: Steel
Weight : 37 g
Environment : RoHS Compliant
■ Strength Data
Pull-Out Load : 190 (N)
Moment Load : 1.2 (N · m)
Name Folding Connector S
Item No. GFJ-D10
Pin Connector S
● Allows for smooth rotation of the frame into which it is inserted.
● Please support the frames at both ends.
● A Thin Spanner 12 x 14 (GFG-075) is required to secure this connector.
■ Material/Technical Data
Material : Body: Aluminum Die-Cast
Bolt/Nut/Bearing: Steel
Weight : 40 g
Environment : RoHS Compliant
■ Strength Data
Sliding Load : 500 (N)
Pull-Out Load : 190 (N)
Moment Load : 2.2 (N · m)
● Please do not use as a cantilever
(a frame supported at only one end).
Name Pin Connector S
Item No. GFJ-D06
Hexagon Socket Head
Cap Bolt M5x35
Hexagon Socket Head
Cap Bolt M5x12
Hexagon Nut M5
Connector
Accessory
Resin Panel (t=3)
Panel Holder S (t=3)
GFS Frame
Alu
min
um
Pip
e S
tru
ctu
ral
GF
19 mm
GREEN FRAME
GF-S 19 mm Type
22
Board Holder S
● Use this part to install a working board to the frame.
● By changing the orientation of the Board Holder S, it can
support either an Outer Connector or an Inner Connector
■ Material/Technical Data
Material : Aluminum Extrusion
Weight : 7 g
Environment : RoHS Compliant
●When using an ST Nut, use ST Nut SS.
● Related Parts
Frame Guard S (GFA-813G)
Round Wood Screw 4.1 x 32
(SFB-9C5)
Flat Washer M4 (SFB-9H2S)
Name Board Holder S
Item No. GFJ-B97
Cable Lock S
● Attach the Cable Lock S to the frame, insert the cable into
the grove at the top and secure with a tie.
■ Material/Technical Data
Material : Polypropylene
Weight : 1.8 g
Environment : RoHS Compliant
Name Cable Lock S
Item No. GFE-013
Cable Lock S
GFS Frame
Accessory
Frame Guard S
Flat Washer M4
Board Holder S
Outer Part
Frame
Guard S
Flat Washer M4
Moving Part
Antiback S
● Allows movement in only one direction. When movement
is attempted in the opposite direction, the mechanism locks
and does not allow the movement.
Name Antiback S
Item No. GFK-N27
■ Material/Technical Data
Material : Body: Aluminum Extrusion
Bolt: Steel
Pin: Stainless
Weight : 45 g
Environment : RoHS Compliant
■ Strength Data
Load Bearing Capacity : 100N
Sliding Load : 250N
Round Wood Screw
Inner Part
Flat Washer M4
GF-N28 mm
Index
GF-S19 mm
GF-G48 mm
Connector
Accessory
Moving Part
GF Motion
GF Other
Contact
23
Alu
min
um
Pip
e S
tru
ctu
ral
Motion
Intermittent Stopper for Small Load L
● Please specify the length of ‘a’ when ordering.
● L-dimension (a – 55mm) is the size of the container.
● Foot pedal, idler, wire, etc. are not included.
NameIntermittent Stopper for Small Load L
Fixed Length (l=800>a>230mm)
Item No. GFK-925
Connector Piece Compact L
Name Connector Piece Compact L (Left) Connector Piece Compact L (Right)
Item No. GFW-316 GFW-317
Escape Finger
This image is
of the R Type
Clamp Ring
Stop Roller
Connector Piece
Compact L
GREEN FRAME
GF Motion
Escape Finger
Clamp Ring
Stop Roller
Connector Piece
Compact L
24
GF-N28 mm
GF Motion
GF Other
GF-G48 mm
GF-S19 mm
Index
Spare Blade Kit (3 piece set)
● Use with the Handy Cutter.
■ Material/Technical Data
Weight : 36.0 g
Environment : RoHS Compliant
■ Products Included
Replacement Blades for Tube Cutter x 3
Cutter Wheel Pin x 3
E. Ring x 3
Name Spare Blade Kit (3 piece set)
Item No. GFK-801
GF Handy Cutter Sliding Block
■ Material/Technical Data
Weight : 22.0 g
Environment : RoHS Compliant
Name GF Handy Cutter Sliding Block
Item No. GFG-029
GREEN FRAME
GF Other
Contact
25
Item No. Name Page
G
GFA-425 GF Hard Frame Inner Cap 10
GFA-613 GF-SF Connector Long L Slot Long G Kit 10
GFA-615 GF-SF Connector Long S Slot Long Kit 10
GFA-617 GF-SF Connector Long S Slot Long G Kit 10
GFA-807 Name Plate Cover L=1,550mm 10
GFA-815G Panel Holder S (t=3) 22
GFA-820 Φ38 PVC Pipe 8
GFA-A50 Parts Container 11
GFA-B37 L Slot Connector Piece L50mm 15
GFC-003 Corocon (Adjustable Cut) 18
GFC-222 Corocon Hook Conductive A 18
GFE-013 Cable Lock S 23
GFG-029 GF Handy Cutter Sliding Block 25
GFJ-031 Multi Connector Outer Type GH 20
GFJ-035 45-Degree Connector (Outer) S 21
GFJ-036 45-Degree Connector Outer Type N-S 21
GFJ-B30 Linear Bush 19
GFJ-B49 Parallel Connector Flat Outer 11
GFJ-B77 Cross Connector Rotate Type S 21
GFJ-B91 Free Connector Inner Type V-M1 8
GFJ-B97 Board Holder S 23
GFJ-D01 Straight Connector Inner 9
GFJ-D02 Point Connector Cross 8
GFJ-D06 Pin Connector S 22
GFJ-D10 Folding Connector S 22
GFJ-D13 Straight Connector Outer Type 9
GFJ-D17 Multi Connector (Outer) R 9
GFK-801 Spare Blade Kit (3 piece set) 25
GFK-925 Intermittent Stopper for Small Load L 24
GFK-956 Φ48 Wire Support Kit 14
GFK-958 Steel Idler Support Kit B 11
GFK-959 Resin Idler Support Kit A 12
GFK-960 Resin Idler Support Kit B 12
GFK-E00 Leak Plate (50 pcs/pack) 12
GFK-F00 Green Frame (L=4,000mm) x 5 pcs 13
GFK-N27 Antiback S 23
GFN-009 Adjustor with Non-slip M8 18
GFN-505 Frame Caster Φ100 with Brake 15
Item No. Name Page
GFN-506 Frame Caster Φ100 15
GFN-526 Screw Shaft Caster Φ75 (Conductive) 16
GFN-527 Free Caster Φ75 with Brake (Rubber) 15
GFN-530 Frame Caster Φ75 (Conductive) 16
GFN-532 Free Caster Φ75 with Brake 16
GFN-533Free Caster Φ75 with Brake
(Urethane)16
GFN-537 Screw Shaft Caster Φ75 (Urethane) 16
GFN-540 Free Caster Φ75 (Urethane) 16
GFN-541Screw Shaft Caster Φ75 with Brake
(Urethane)16
GFN-546 Free Caster Φ100 (Conductive) 17
GFN-550 Fixed Caster Φ75 16
GFN-551 Fixed Caster Φ75 (Urethane) 16
GFN-578Frame Caster N Frame Φ75 Nylon No
Brake17
GFN-584Frame Caster N Frame Φ100
Conductive No Brake17
GFN-587Frame Caster N Frame Φ100 Nylon
with Brake17
GFN-589Frame Caster N Frame Φ100
Urethane with Brake17
GFN-605Frame Caster G Frame Φ125
Conductive with Brake20
GFN-621 Frame Caster Fixed Φ50 Rubber 17
GFN-656Frame Caster N Frame Φ50 Elastomer
with Brake17
GFN-658Frame Caster N Frame Φ75 High Load
with Brake17
GFP-000 Hinge P-L 13
GFP-004 Hinge P-R 13
GFP-005 Hinge F-L 13
GFP-007 Hinge-F-R 13
GFP-012 GF Slip-Joint Hinge L 14
GFP-013 GF Slip-Joint Hinge R 14
GFQ-004 Catch for Frame with Switch 14
GFW-249 Φ2 Wire 5m 19
GFW-316 Connector Piece Compact L (Left) 24
GFW-317 Connector Piece Compact L (Right) 24
S
SFA-809 Slot Roller L40 Light 19
Ind
ex
Item No. List (Numerical / Alphabetical)
26
1822 Brummel Avenue, Elk Grove Village, IL 60007
TEL 847.350.1525 FAX 847.350.1533
Websitewww.susamericainc.com
www.youtube.com/c/SUSAmericaInc
www.linkedin.com/company/sus-america-inc./
Visit our interactive showroom.Contact SUS today to set an appointment.
To place an order, or for more information, please email
GF-N28 mm
GF-G48 mm
GF-S19 mm
Contact
Index
GF Motion
GF Other
27
1822 Brummel Avenue, Elk Grove Village, IL 60007
TEL 847.350.1525 FAX 847.350.1533
EMAIL [email protected]
www.susamericainc.com
GF-USA-002