aluminum slip fitter assemblies, cast nipple · slip fitter, 1 & 2-way for 4-1/2” od pole,...
TRANSCRIPT
Page T4-1www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
PAluminum Slip Fitter Assemblies, Cast Nipple
Note: 1. All assemblies supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
1/1/20
Coating
PNC=Process No ColorP_ _=Paint
SE-3037 -
Slip Fitter Assy, 1-Way w/ 2-Way Side Ports for 4-1/2” OD Pole Cast Nipple
SE-3003Signal Mounting Kit
SE-3311 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter Assy, 1-Way for 4-1/2” OD PoleCast Nipple
SE-3003Signal Mounting Kit
SE-3310 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter Assy, 1-Way Offset for 4-1/2” OD PoleCast Nipple
SE-3003Signal Mounting Kit
SE-3279 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter Assy, 1-Way for 2-7/8” OD PoleCast Nipple
SE-3054Signal Closure Kit
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block.
Page T4-2 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
Aluminum Slip Fitter Assemblies
Note: 1. All assemblies are supplied standard with stainless steel slotted washer and fasteners. 2. See Reference Section for available paint colors.
10/11/17
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block. Designed to fit a 4-1/2” OD pole.
Slip Fitter Assy, 1-Way for 4-1/2” OD PoleTri-Bolt & Cast Nipple
SE-3012 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
SE-4111-SSHardware Kit
SE-3005Lower Arm Assy
Slip Fitter Assy, 2-Way 16-1/2” CTCfor 4-1/2” OD Pole Cast Nipple
SE-3089 -Coating
PNC=Process No ColorP_ _=Paint
SE-3005Lower Arm Assy
SE-3004Upper Arm Assy
SE-4111-SSHardware Kit
Slip Fitter Assy, 2-Way Variable for 4-1/2” OD PoleTri-Bolt & Cast Nipple
SE-3116 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
Page T4-3www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
PAluminum Slip Fitter Assemblies, Cast Nipple
Note: 1. All assemblies are supplied standard with stainless steel slotted washer and fasteners. 2. See Reference Section for available paint colors.
10/11/17
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block. Designed to fit a 4-1/2” OD pole.
SE-3010Upper Arm Assy
SE-3005Lower Arm Assy
SE-3010-24.5Upper Arm Assy
SE-3005-24.5Lower Arm Assy
SE-3257 - Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter Assy, 2-Way ICC Ped 24-1/2” CTCfor 4-1/2” OD Pole, Cast Nipple
SE-3053 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
Slip Fitter Assy, 2-Way 16-1/2” CTC for 4-1/2” OD Pole, Cast Nipple
Page T4-4 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
Slip Fitter Assy, 2-Way 16-1/2” CTC for 4-1/2” OD PoleTri-Stud
SE-5006 -Coating
PNC=Process No ColorP_ _=Paint
Aluminum Slip Fitter Assemblies, Tri-Stud
Slip Fitter Assy, 2-Way 16-1/2” CTC for 4-1/2” OD PoleTri-Stud
SE-5008 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
Note: 1. All assemblies are supplied standard with stainless steel slotted washer and fasteners. 2. See Reference Section for available paint colors.
1/1/20
SE-5016 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter Assy, 1-Way for 4-1/2” OD PoleTri-Stud
SE-5122Hardware Kit
SE-5005Lower Arm Assy
SE-5004Upper Arm Assy
SE-5123Hardware Kit
SE-5122Hardware Kit
SE-5007Upper Arm Assy
SE-5005Lower Arm Assy
SE-5122Hardware Kit
SE-5123Hardware Kit
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block. Designed to fit a 4-1/2” OD pole.
Page T4-5www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
PIron Slip Fitter Assemblies,Cast Nipple
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
10/11/17
Slip Fitter Assy, 2-Way 16-1/2” CTC for 4-1/2” OD PoleCast Nipple
SE-3183 - -Coating
P_ _=Paint1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
SE-3182Upper Arm Assy
SE-3180Lower Arm Assy
SE-3150Upper Assy Kit
Slip Fitter Assy, 2-Way 16-1/2” CTC for 4-1/2” OD PoleCast Nipple
SE-3181 -Coating
P_ _=Paint
SE-3150Upper Assy Kit
SE-3180Lower Arm Assy
SE-3179Upper Arm Assy
Slip Fitter Assy, 1-Way w/ 2-Way Side Ports for 4-1/2” OD PoleCast Nipple
SE-3177 -Coating
P_ _=Paint
SE-3174Signal Mounting Kit
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block. Designed to fit a 4-1/2” OD pole.
Page T4-6 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
10/11/17
This page is intentionally left blank.
Page T4-7www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
Slip Fitter, 3 & 4-Way for 4-1/2” OD Pole, Alum
SE-3029 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitters, Alum
Slip Fitter, 1-Way for 4-1/2” OD Pole, Alum
SE-3106 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter, 1-Way Offset for 4-1/2” OD Pole, Alum
SE-3107 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter, 1 & 2-Way for 4-1/2” OD Pole, Alum
SE-3002 -Coating
PNC=Process No ColorP_ _=Paint
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
Pelco’s aluminum Post Top Slip Fitters are available in a one-way, offset one-way, or a two, three, or four-way configuration.
1/1/20
Page T4-8 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
Slip Fitter, 1 & 2-Way for 4-1/2” OD Pole, Iron
SE-3175 -Coating
P_ _=Paint
Slip Fitter, 3 & 4-Way for 4-1/2” OD Pole, Iron
SE-3176 -
Coating
P_ _=Paint
Slip Fitters, IronPelco’s iron Post Top Slip Fitters are available in a one, two, three, or four-way configuration.
Slip Fitter, 1-Way for 4-1/2” OD Pole, IronSerrated Top Port
SE-4431 -Coating
PNC=Process No ColorP_ _=Paint
10/11/17
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
Page T4-9www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
PSlip Fitters, Bronze
Slip Fitter, 1-Way for 4-1/2” OD Pole, BronzeSerrated Top Port
SE-4424 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter, 1 & 2-Way for 4-1/2” OD Pole, BronzeSerrated Top Port
SE-4423 -Coating
PNC=Process No ColorP_ _=Paint
Slip Fitter, 1-Way Offset for 4-1/2” OD Pole, BronzeSerrated Top Port
SE-4425 -Coating
PNC=Process No ColorP_ _=Paint
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
10/11/17
Bronze Post Top Slip Fitters are available in a one-way, offset one-way, or a two-way configuration. Pelco’s bronze slip fitters are cast with top port serrations which eliminates the need for a lockring.
Page T4-10 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
Aluminum Terminal Compartment Assemblies
Note: 1. All assemblies are supplied standard with stainless steel slotted washer and fasteners. 2. See Reference Section for available paint colors.
10/11/17
Terminal Compartment Assy, 1-Way, Alumfor 4-1/2” OD PoleCast Nipple
SE-3270 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
Terminal Compartment Assy, 1-Way, Alumfor 4-1/2” OD PoleTri-Bolt & Cast Nipple
SE-3013 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
SE-4111Hardware Kit{
Terminal Compartment Assy, 1-Way ICC Ped, Alumfor 4-1/2” OD PoleCast Nipple
SE-3271 -Coating
PNC=Process No ColorP_ _=Paint
SE-3027TerminalCompartment
SE-3027TerminalCompartment
SE-3027TerminalCompartment
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block. Designed to fit a 4-1/2” OD pole.
Page T4-11www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
PAluminum Terminal Compartment Assemblies
Note: 1. All assemblies are supplied standard with stainless steel slotted washer and fasteners. 2. See Reference Section for available paint colors.
10/11/17
Terminal Compartment Assy, 2-Way, Alum16-1/2” CTC for 4-1/2” OD PoleCast Nipple
SE-3048 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
SE-3011Lower Arm Assy
{
SE-3010Upper Arm Assy
{
Terminal Compartment Assy, 2-Way, Alum24” CTC for 4-1/2” OD PoleCast Nipple
SE-3141 -Coating
PNC=Process No ColorP_ _=Paint
SE-3004Upper Arm Assy
{
Terminal Compartment Assy, 2-Way, Alum16-1/2” CTC for 4-1/2” OD PoleTri-Stud
SE-5187 - -Coating
PNC=Process No ColorP_ _=Paint
1=1 Sec2=2 Sec3=3 Sec4=4 Sec5=5 Sec
SignalSection
SE-5122Hardware Kit
{
SE-5007Upper Arm Assy
{
Pelco’s Post Top Slip Fitters are available in aluminum, bronze, and iron, 1-1/2” NPS, Tri-Bolt or Tri-Stud. Post Top Terminal Compartments are available in aluminum or bronze and are supplied with a 12-circuit terminal strip or block. Designed to fit a 4-1/2” OD pole.
Page T4-12 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
10/11/17
Terminal CompartmentsAluminum
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
Pelco’s aluminum Post Top Terminal Compartments are available in a 2-way or 3-way configuration. Each are supplied standard with a 12-circuit terminal strip and an ABS plastic door.
Terminal Compartment Assy, Vertical2-Way Post Top for 4-1/2” OD Pole, Alum
SE-3027 -Coating
PNC=Process No ColorP_ _=Paint
Terminal Compartment Assy, Vertical3-Way Post Top for 4-1/2” OD Pole, Alum
SE-3074 -Coating
PNC=Process No ColorP_ _=Paint
Rear Port
Page T4-13www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
PTerminal CompartmentsAluminum
10/11/17
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available paint colors.
Pelco’s 2-way Horizontal Terminal Compartments are cast aluminum supplied with ABS plastic doors. Each can be configured with either a top port or a rear port and are supplied with one or two 12-circuit terminal strips.
SE-3042Upper Assy Kit
{
Terminal Compartment Assy, Horizontal2-Way Post Top for 4-1/2” OD Pole, Alum
SE-3143 - - -Coating
PNC=Process No ColorP_ _=Paint
1T=Terminal Strip (1)2T=Terminal Strips (2)
Terminal Strip
TP=Top PortRP=Rear Port
PortMountings
Terminal Compartment Assy, Horizontal2-Way Post Top for 4-1/2” OD Pole, AlumCast Nipples
SE-3135 - - -Coating
PNC=Process No ColorP_ _=Paint
1T=Terminal Strip (1)2T=Terminal Strips (2)
TP=Top PortRP=Rear Port
Terminal StripPort
Mountings
Page T4-14 www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
RIG
ID P
OST
TO
P
4/15/19
Terminal CompartmentsBronze & Iron
Note: 1. All assemblies are supplied standard with stainless steel fasteners. 2. See Reference Section for available wet paint colors.
Terminal Compartment Assy, Vertical2-Way Post Top for 4-1/2” OD Pole, Iron
SE-3331 -Coating
GLV=GalvanizedP_ _=Paint
Pelco’s bronze and iron Post Top Terminal Compartments are available in a 2-way configuration. Each are supplied standard with a 12-circuit terminal block and an ABS plastic door.
Note:Plastic door standard, aluminum door available.
Terminal Compartment Assy, Vertical2-Way Post Top for 4-1/2” OD Pole, Bronze
SE-4422 -Coating
PNC=Process No ColorP_ _=Paint