alvarion breeze max configuration.ppt [compatibility mode] - 13_alvarion_breeze_max_configuration

5/22/2018 Alvarion Breeze Max Configuration.ppt [Compatibility Mode] - 13_Alvarion_Breeze_Max_Configuration

1/52

Gem ini Com m unication Ltd.Gem ini Com m unication Ltd.

www.gcl.in G em ini Com m unication Com pany Confidential

Training M anualTraining M anual

BTS and SS ConfigurationBTS and SS Configuration


2/52

Breezem ax Default IP address of DATA port :

1.1.1.3/255.255.255.0

Breezem ax Default IP address of M GM T port :

10.0.0.1/255.255.255.0

BST have tw o ports: DATA PO RT

M anagem ent Port


T e BST a e m a a e ee wa s

Telnet via DATA or M GM T port

SNM P (AlvariCRAFT/AlvariSTAR via DATA or M GM T port

Serial connection via the M ONITOR port

To access the M ONITOR program , connect Cable toeither the DATA or M GM T port. Telnet the ports IPaddress. At the password prom pt, type adm in. Adm in isthe default adm inistrator password of the BS.

Note: Your operator m ight ask you to change thepassword during the com m issioning


3/52

After telnet the unit following should be displayed

on the screen:



4/52

PRESS 3 FOR CO NFIG URATION


THE ABOVE 7 OPTIONS would be displayed on SCREEN.


5/52

3.1. G ENERAL PARAM ETERS:

Press 1 for configuring G eneral Param eters.

Four options would be displayed:



6/52

1. Press 1 to configure Device Nam e - Give the nam e of BST

at the Prom pt.

2. Press 2 to configure Device Location Give the Locationof BST on the Prom pt

3. Press 3 to configureATPC Control - It should be enabled

a) 1 to show the current status

b) --2 to update/configure the status.

a) Press 2 to set ATPC control (if not enabled already)



7/52

c) W e have fix the optim al uplink RSSI level which has to

m aintained by CPE towards BST. (W e have fix it on -73

dBm )



8/52

4. Cell

a) Show -- Shows the current Status

b) Update To change the entered Value (or to put the

value for the first tim e you will see the

cursor blinking)


Leave O perator ID unchanged & configure the Cell ID infollowing form at: BST ID.

Sector A,B,C,D e.g. 34.A (where 34 is BST ID and A is orientation of Sector)


9/52

Option 3.2 -- M anagem ent Port


It has six sub options.


10/52

3.2.1 Show M anagem ent Port Configurations


Press 1 : It shows com plete port detailed configured

presently


11/52

3.2.2 M anagem ent port IP Address


Press 2 : You can configure the IP address of BST as

per the info Provided.


12/52

3.2.3 M anagem ent Port Subnet M ask


Press 3 : You can configure Subnet M ask of BST as per

the info Provided.


13/52

3.2.4 M anagem ent port G ateway


Press 4: You can configure the Gateway of BST as per

the info Provided.


14/52

3.2.5 Auto Negotiation O ption-- Enable/Disable


Press 1 enable: It should be Enable


15/52

3.2.6 M anagem ent Port M anagem ent Traffic-

Enable/Disable


Press 2 to enable: It should be Enable


16/52

O ption 3.3 Data Port


It has seven options


17/52

3.3.1 Show Data Port configuration


Press 1 to see the com plete sum m arized detail of the Data Port


18/52

3.3.2 -- Data Port IP Address


Press 2 To configure the IP address of the Data

Port as per the info Provided.


19/52

3.3.3 Subnet M ask of Data Port


Press 3 To configure Subnet M ask of Data Port as per

the info Provided.


20/52

3.3.4 Data Port Gateway


Press 4 to configure the Gateway IP Address for Data Port as per

the info Provided.


21/52

3.3.5 Data Port M anagem ent VLAN ID


Press 5 To configure the M anagem ent VLAN ID for Data Port as per

the info Provided.


22/52

3.3.6 Auto Negotiation O ption


Press 1 to enable Auto Negotiation. (Auto Negotiation

should be enabled in BST)


23/52

3.3.7 Data port m anagem ent Traffic Enable/Disable


Press 2 to enable Data Port M anagem ent Traffic. (Data Port

M anagem ent Traffic should be Enabled in BST.)


24/52

Option 3.4 Authorised M anagers


It has three Options: 1) to view present Authorized M anager,

2) To select the particular Authorized M anager

3) To add another Authorized M anager


25/52

3.4.1 Show All


It shows the sum m arised report of Authorised M anagers


26/52

Option 3.5 Bridge


Leave Bridge Aging Tim e unchanged


27/52

Option 3.6 --Voice


Leave DRAP TTL Retries Unchanged


28/52

Option 3.7 --Debug stream


Leave Debug Stream Unchanged


29/52

Option 4 Alarm s & Traps


It has four O ptions


30/52

4.1 Show Active Alarm


Press 1 to see all the active alarm s


31/52

4.2 Trap Display Filter


Leave Trap Configuration Unchanged


32/52

4.3 Show trap Log


Press 1 to see the Log of all the traps


33/52

4.4.2.3


Factory default settings been configured


34/52

4.4.3 --Severity


It has three sub m enus for viewing, updating the severity of

traps & to set the traps on default value.


35/52

4.4.4 Suppression Interval


Leave Suppression Unchanged


36/52

3.5 Perform ance M onitoring


It has two options one for Port Counter & other for BER Counters.


37/52

3.5.1 Port counters


It has two options one for M anagem ent port & other for Data & wireless

Ports


38/52

3.5.1.1 M anagem ent Port Counters

Press 1 for M anagem ent Port Counters



39/52

3.5.1.1.1 It shows the Port counters


Press1 to see the status of the Packets Transm itted, discard

Packets Etc.


40/52

3.5.1.1.2 Reset Counters


It reset all the counters & sets them to zero


41/52

3.5.2 Data & W ireless Port Counters


It has two sub m enus one to view & other to reset the counters


42/52

3.5.2.1 Show Port Counters


It shows the Status of Data Bytes Received, Discard

etc in both Data & wireless Port.


43/52

3.5.2.2 Reset Counters


It sets all the counters to zero


44/52

3.5.3 Burst Error Rate Counters


It has two Sub m enus one to view & other to Reset the counters


45/52

3.5.3.1 Show Counters


You have to select the M AC of the particular SU for which you want to

view the data Bytes transferred.


46/52

Put the M AC of SU for which you want to see the BER



47/52

Alvarion BreezeM ax CPE configuration.



48/52

SU Com m issioningConnect ethernet port to the laptop/PC

Default IP address of the Eth port is 192.168.254.251(m ask 255.255.255.0)

Default Password for entering the configuration m enus is:

installer

The configuration is done via the Ethernet port (10/100BaseT) of the SU, using Telnet


Fo ow ee o se e a es o e e e o ec

password, access to the M onitor program will be blocked

for 5 m inutes.

The rest of the SU param eters are configured in the SU

m enu in the NPU m onitor application.


49/52

After log-in in CPE the following Options com es:

1)Show Sum m ary

2)Unit Control

3)Configuration


5)Perform ance M onitoring


50/52

1-It shows the com plete detail of that CPE

2 Unit Control

Reset To reboot the device (Soft Reboot)3 Configuration

a) Nam e : You have to give the nam e as (Connected to


b) Organisation Nam e: Put the nam e of Custom er

c) Address: Give the nam e of custom er Address.4.Radio Param eters-

a) Bandwidth

b) Uplink Frequency.


51/52

5. Perform ance M onitoring-

a) Start Link Quality Status .



52/52

Thank YouContact :info@ gcl.in


alvarion breeze max configuration.ppt [compatibility mode] - 13_alvarion_breeze_max_configuration

Documents