amazon s3table of contents male connector page no. - 13-14 bulkhead male page no. - 15 male elbow...
TRANSCRIPT
Tube Fittings
• Sizes: Fractional: 1/16” - 1” And 2mm to 25mm
•
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 6000 PSI,
• NPT, ISO/BSP, and SAE threads•
ISO 9001:2015 COMPANY
www.pmtvalvesfittings.com
Catalogue No.:- PMT-TF
DUNS NO. : 86-917-7745
Manufacturer & Exporters of Valves & Fittings
AN ISO 9001:2015 COMPANY
Table of ContentsTable of Contents
MALE CONNECTOR
Page No. - 13-14
BULKHEAD MALE
Page No. - 15
MALE ELBOW
Page No. - 16-17
MALE BRANCH
Page No. - 18
MALE RUN TEE
Page No. - 19
FEMALE CONNECTOR
Page No. - 20-21
BULK HEAD FEMALE
Page No. - 22
CONNECTOR
CONNECTOR
FEMALE ELBOW
Page No. - 23-24
FEMALE BRANCH
Page No. - 25
TEE
TEE
FEMALE RUN TEE
Page No. - 26
UNION
Page No. - 27 Page No. - 28-29
REDUCING UNION BULKHEAD UNION
Page No. - 30
UNION ELBOW
Page No. - 31
UNION TEE
Page No. - 32
REDUCING UNION
Page No. - 33
TEESBULKHEAD REDUCER
Page No. - 33
REDUCING UNION
Page No. - 34
TEESUNION CROSS
Page No. - 35
AN UNION
Page No. - 36
AN BULKHEAD
Page No. - 36
UNIONTUBE SOCKET WELD
Page No. - 37
UNIONTUBE SOCKET WELD
Page No. - 37
ELBOW CONNECTORMALE PIPE WELD
Page No. - 38-39
REDUCER
Page No. - 40-41
PORT CONNECTOR
Page No. - 42
REDUCING PORT
Page No. - 43
CONNECTORCAP
Page No. - 44
MALE ADAPTER
Page No. - 45-46
FEMALE ADAPTER
Page No. - 47-48
AN ADAPTER
Page No. - 48
WELD ADAPTER
Page No. - 49
NUT
Page No. - 49
BACK & FRONT FERRULE
Page No. - 50
DESIGN FEATURESPMT tube fittings are designed of four precision engineered components (as shown in following fig.), all fittings have been designed to meet the most stringent demands of quality tube line fabrication.
NUT
BACK FERRULE
FRONT FERRULE
BODY
COMPANY PROFILE PMT Engineers is a professional undertaking established in 1996 to manufacture and exporters of fluid process
components—namely Tube Fittings, Pipeline Fittings, Tubes, Valves (Needle, Ball, Check, Gate, Globe), Manifold Valves, Gauge Cock, Gauge Saver, Pulsation Dampners, Syphons, Thermowells, Quick Release Coupling, Condensate Pots, Sampling Cylinder, Orifice Plate Assembly, Flanges, Studs, Nuts, Air Headers, and other accessories pertaining to process instrumentation. The products are manufacturing from Bar Stock and Shaped Forged in SS-316, Carbon Steel, Brass, Monel, Incoloy, Hastelloy, SS - 316 L.
“PMT Engineers work towards well-defined objectives, conforming to the highest manufacturing and procedural guidelines aimed to present to the local and global market quality products that must compare with the best internationally.” PMT Engineers’ machined components fulfill the need for quality process tubes and fittings in industries such as—
Petrochemical Chemical
BoilerPlantAssembly Pharmaceuticals
Fertilizer Textiles
Cement Refinery
OilandNaturalGas Hydraulic and Sluice plants etc.
The Company is thoroughly equipped to cater to the most stringent and exacting demands. Located at GIDC the most
celebrated industrial enclave in Ahmedabad, the well-known industrial city in India, PMT’s operations are carried out in a
plant having modern state-of-the-art equipment, including a sophisticated testing and inspection lab.
PMT Engineers processes its premium components further in the following departments—
Quality is the main priority determining product integrity at PMT Engineers. To maintain standards the Company maintains a state-of-the-art R & D and Inspection Department where every product is subjected to quality tests from the raw material stage to the finished product. These exercises and procedures are an unalienable aspect of QC and are monitored by thorough documentation as a follow-up on the stage by stage manufacturing of the product.
The Company’s aim is not just the well-worn word “quality” but all those little details that accomplish quality, especially those characteristics that make up an attitude to work, percolating to become an inborn corporate creed. So, in reaping performance, appreciation, and inquiries, PMT Engineers is not complacent about its input but strives to equal and even excel previous performance.
Corporate Mission
■ ■ ■ ■ ■ ■ ■ ■ ■
Quality Control & Management
Towards excellence
■
Although the fittings consist of four components: Nut, back ferrule, front ferrule and the body, it becomes a four piece connection when affixed to tubing. The two ferrule design and sequential action of the fittings overcome in-variation of tube wall thickness and hardness to assure safe, reliable, leak-free connections. PMT tube fittings are easily installed without any special tools. The front ferrule swages onto the tube as it moves down the cone of the body creating a pressure/vacuum tight seal on both tube and body by interface pressure and surface finish of matching components. The back ferrule, deforms into the tube creating a strong mechanical and anti-vibration hold on the tube. The internal diameter of body and nut are closely controlled which constrain the tube within a close tolerance of its axis ensuring accurate alignment within the assembled fitting. In case of S.S. tube fittings high hardness of ferrules is assured/maintained (more than Rb 90) For reliable joints the positive tolerances on inside diameter of ferrules and body is kept to minimum. The nut threads are silver coated to ensure no galling.
Thus the design features on the tube end side can be summarised as below.1) The back ferrule dampens the tube circuit vibration through a spring like action. Further more, it prevents a carry over of tightening torque from the fitting nut to front ferrule.2) The front ferrule circumferentially seals the surface between the tube and fitting. The inner taper of front ferrule is pressed on the tube so that a pressure tight impression is formed.3) Silvering of nut threads prevents seizing/galling. This allows repeated use of fittings.4) A deep body bore on tube side and taper, guarantees accurate positioning and centering of tube. The twin ferrule connection does not in any way reduce the strength of the tube and therefore tube having thin wall can be used without affecting the safety of installation.
PMT
When the assembly is fully tightened, Sealing action of PMT tube fitting takes place as well as below illustrated figure.
PMT
FEATURES
When the nut is tightened, the back ferrule is driven against the tapered rear of the front ferrule. The front ferrule is driven by force into the tapered mouth of the fitting body and creates a primary tubing seal. The back ferrule consistently grips the tubes to hold the fitting and tubing firmly in place while the front ferrule forms a full-faces seal on the tapered surface of the body.In the twin-ferrule tube fitting design, the back and front ferrules move axially instead of a rotary motion. No torque is transferred to the tubing during installation.
Two ferrules are optimized to provide sealing and tube gripping function.
The front ferrule creates a seal:
As the nut is tightened, the back ferrule :
Against the fitting body.On the tubing outside diameter.
Axially advances the front ferrule.Radially provides an effective tube grip.
NO TUBE ROTATION ON MAKE UP NO TORQUE TRANSMISSION TO TUBING
FINE PITCH, SILVER PLATEDNUT THREADS ENSURE NO GALLING
CONTROLLED GRIPPING ACTION
TUBING ‘BUTT SEAL’PROVIDES ‘SERIES SEAL’
FULL FACE CONTACT& 4 POINT SUPPORT AMONG ALL COMPONENTS
PRESSURE/VACUUM SEALBY FRONT FERRULE
STRONG MECHANICAL &ANTI VIBRATION HOLDBY BACK FERRULE
MINIMUM TUBING I.D REDUCTION
On the pipe end connection side of fittings, most widely used "NPT" threads are machined and rolled as per ANSI B2.1/ANSI B1.20.1. For leak proof connection suitable sealing material (Teflon tape/paste) should be used. The straight threads are fine threads machined as per ANSI B1.1 or equivalent standards.Some of the important features/characteristics of PMT Twin ferrule tube fittings are :
• Withstands high pressure and vacuum.• Leak tight assembly from vacuum to high pressure is assured.• Excellent make and re-make life.• No Twisting of tubes while assembly.• Assembling with self aligning front and back ferrule.• No transmission of torque on tubing while assembly.• Controlled tightening, no distortion of tube, no rupture of tube fibres and minimum reduction of tube bore size.• Low tightening torque (the nut being of non binding design)• Fittings can be used with thin and thick walled tubing. (As per guidlines of Table 1, 2 & 3)• Silver plated nut to avoid galling and give low assembly torque. No pre-lubrication needed.• Fittings can be used (ensuring leak tightness) in low to high temperature range.• Anti-vibration hold on the tube (Vibration resistant).
Metric tube fittings are identified by a stepped shoulder on both the body and the threaded end of the nut as illustrated in the following fig.
IDENTIFICATION OF METRIC TUBE FITTINGS
INSTALLATION PMTINSTRUCTIONS OF TUBE FITTINGS
Ensure that the end of the tube is cut square and deburred.
1) Simply insert the tubing into PMT tube fitting. Make sure that the tube is firmly rest on the shoulder of the fitting and that nut is finger tight.
2) Before tighting the PMT nut, scribe the nut at the 6.00 'o' clock position as illustrated in the below figure.
METRICTUBE END
IMPERIALTUBE END
STEPPED SHOULDER
1
23 4 5
6
7
8
91011
12
3)Now while holding the fitting body firmly with a backup wrench, tighten the nut one and one quarter Turns, watch the scribe mark make one complete revolution and continue to 9 o'clock position.
NOTE:Due to variation in tube diameters for high pressure and safety systems, a common starting point is desirable. To achieve this ( a wrench snug up the nut until the tube cannot be rotated by hand. From this point the nut should be rotated one and a quarter turns.)For sizes upto 1/8" in imperial tube fittings and 4 mm in metric tube fittings only 3/4 turn from finger tight position is necessary.
RE-ASSEMBLY INSTRUCTIONS OF TUBE FITTINGSPMT
With PMT tube fittings the connection can be disconnected and retightened many times and the same reliable, safe and leak proof connection can be obtained. For re-assembly the following steps should be followed.
1) Insert tube with ferrules into the tube fitting until front ferrule seats in fittings.
2) Holding the body with spanner, the nut is tightened to the original position and then given a slight extra effort to retain positive sealing
1
23 4 5
6
7
8
9
1011
12
.
Most widely used NPT threads have been machined for connecting the threaded fittings. Leak tighteness is not achieved by the thread alone without sealant. Commercially available Teflon tape/paste is to be used to provide sealing and lubricating agent. Wrap the tape 4 to 5 layers around the male threads in a clockwise direction. Ensure that the tape/paste does not over hang the first thread.
The PMT twin ferrule tube fitting is precision engineered to exacting standards. Careful selection of high quality tubing together with appropriate PMT fitting will ensure the installation of safe, leak free systems.
PMT tube fittings are designed to work on line material. Stainless steel fittings should be used with S.S. tubing. The practice of mixing material is strongly discouraged. The only exception is brass fittings with copper tubing.
PIPE THREAD CONNECTION
SELECTION OF TUBING
Disimilar materials in contact may be susceptible to galvanic corrosion. Further different materials have different levels of
hardness, and can adversely affect the fittings ability to seal on the tubing.
The tubing wall thickness is decided based on maximum pressure rating. Thick walled tubing helps to provide resistance.
Very low wall thickness of tubing may result in unreliable joints. For PMT S.S. tube fittings seamless S.S. 316/316L/304L
fully annealed tubing of high commercial quality as per ASTM-A-.269/ASTM-A-213 is recommended.
PMT tube fittings are normally not recommended for tube wall thickness outside the ranges shown in Table I, II & III.
The key to proper tube hardness for use with PMT tube fitting is that the tubing should be softer than the fitting material.
Based on this, preferred hardness of tubing is Rb 80 or less. If harder tube is used the maximum hardness should not
exceed Rb 90.
Special care must be taken while selecting tubing for gas service. In gasses even a small surface defect may provide a leak
path. In order to achieve a gas tight seal, ferrules in instrument fittings must seal any surface imperfections. This is
accomplished by the ferrules penetrating the surface of the tubing.
Penetration can only be achieved if the tubing provides radial resistance and if the tubing material is softer than the ferrules.
Though maximum allowable hardness of S.S. tubing as per ASTM 269/213 is Rb 90, preferred hardness of tubing should
be Rb 80 or less for reliable and leak proof joints mainly in gas application.
The suggested minimum wall thickness of S.S. tubing for gas service for different sizes of tubing is given in following table.
SUGGESTED MINIMUM WALL THICKNESS OF S.S. TUBING FOR GAS SERVICE
TUBING FOR GAS SERVICE
RECOMMENDED MAXIMUM WORKING PRESSURE FOR DIFFERENT TUBING
The maximum allowable working pressure for different tubings (as given in following tables) have been calculated using
the maximum allowable stress levels in accordance with ANSI B 31.3. The calculations are based on nominal wall
thickness and at ambient temp. At higher temperature the maximum working pressure will be less as the allowable stress
will be reduced. The maximum working pressure in the following tables have been given only for recommended minimum
to maximum wall thickness for different sizes of tubing.
TABLE-1
RECOMMENDED MAXIMUM WORKING PRESSURE FOR SS 304/316 TUBING (SEAMLESS) IN POUNDS PER
SQUARE INCH.
TABLE-2
RECOMMENDED MAXIMUM WORKING PRESSURE FOR STEEL (SEAMLESS! IN POUNDS PER SQUARE INCH.
TUBE O.D.(Inch)
1/8
3/16
1/4
5/6
3/8
1/2
5/8
3/4
7/8
1
TUBE WALL THICKNESS (inch)
0.028
8600
5500
4000
-
-
-
-
-
-
-
0.035
11200
7000
5100
4100
3300
2500
-
-
-
-
0.049
-
10400
7500
5900
4800
3500
3000
2400
2100
-
0.065
-
-
10500
8100
6600
4800
4000
3300
2800
2400
0.083
-
-
-
-
-
6300
5200
4300
3600
3200
0.095
-
-
-
-
-
-
6100
5000
4200
3700
0.109
-
-
-
-
-
-
-
5800
4900
4200
0.120
-
-
-
-
-
-
-
-
-
4700
SUGGESTED MINIMUMWALL THICKNESS
(Inch)
0.028
0.028
0.028
0.035
0.035
0.041
0.052
0.062
0.073
0.083
TUBE O.D.(Inch)
1/8
3/16
1/4
5/6
3/8
1/2
5/8
3/4
7/8
1
TUBE O.D.(Inch)
1/8
3/16
1/4
5/6
3/8
1/2
5/8
3/4
7/8
1
TUBE WALL THICKNESS (inch)
0.028
8200
5200
3800
-
-
-
-
-
-
-
0.035
10900
6700
4900
3800
3100
2300
1800
-
-
-
0.049
-
10100
7200
5500
4500
3300
2600
2200
1800
1600
0.065
-
-
10100
7700
6200
4500
3500
2900
2500
2100
0.083
-
-
-
-
-
6000
4600
3800
3200
2800
0.095
-
-
-
-
-
-
5400
4400
3700
3200
0.109
-
-
-
-
-
-
-
5100
4300
3700
0.120
-
-
-
-
-
-
-
-
-
4100
TABLE-3
RECOMMENDED MAXIMUM WORKING PRESSURE FOR COPPER (SEAMLESS) TUBING IN POUNDS PER
SQUARE INCH.
PMT Twin ferrule tube fittings are manufactured to conform with the applicable sections of the American standard code for
pressure piping (ASME codes). Manufacturing process is precisely controlled by a well established and approved quality
assurance programme.
Manufacturing is started only after verifying the chemical composition and hardness of raw material. Unless otherwise
asked for special material, PMT twin ferrule tube fittings are manufactured from S.S. 316 material. Ail bar stock items, i.e.
nut ferrules and straight connectors, unions, etc. are manufactured from S.S. 316 meeting ASTM-A-479/276
requirements. All shaped fittings i.e. tees, elbows, etc. are manufactured from forgings meeting requirementsofASTM-A-
182. . ,
Batch production of fittings is allowed only after qualification of sample fitting parts. Internal bores, seat angle, tube bore
depth, ferrule and body inner dimensions and pipe threads are checked on 100% basis.
QUALITY ASSURANCE PLAN
TUBE O.D.(Inch)
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
TUBE WALL THICKNESS (inch)
0.028
2800
1600
-
-
-
-
-
-
-
-
0.035
3800
2300
1700
1700
1100
800
-
-
-
-
0.049
-
3600
2600
2000
1600
1200
900
800
600
550
0.065
-
-
3600
2800
2300
1600
1300
1000
900
800
0.083
-
-
-
-
-
2100
1700
1400
1100
1000
0.095
-
-
-
-
-
-
2000
1600
1300
1200
0.109
-
-
-
-
-
-
-
1900
1600
1400
0.120
-
-
-
-
-
-
-
-
-
-
Hardness test on ferrules, pressure test, make remake test, vibration test, pull out tests, pressure & temp cycling tests are
done on limited samples selected randomly from the lot and in case of any failure, full lot is tested for above tests.
In house Extensive test facility is being developed for performing different tests on tube fittings.
1) Select proper tubing with PMT tube fittings. Seamless tubing is recommended.
2) Avoid combining or mixing materials or fittings components from various manufacturers.
3) Do not make up or tighten fittings when system is pressurised.
4) Never turn fitting body. Hold body and turn nut.
5) Do not bleed down system by loosening fittings nut or plug.
6) Always use proper thread sealant and lubricants on tapered pipe threads.
7) Total system design must be considered to assure safe & trouble free performance. Material compatibility, adequate
rating, proper installation operation and maintenance are the responsibility of the system engineer and user.
8) Tubing materials should always be softer than the fitting material. S.S. tubing should not be used with Brass fittings.
9) Tubing should be fully annealed if tubing and fitting material is same.
10) Extremes (Minimum and maximum) of wall thickness should always be checked as per guidelines of Table 1, 2 & 3.
11) Surface finish is very important for proper sealing. Tubing with any kind of depression, scratch, raised portion or other
surface defect will be difficult to seal particularly on gas service.
12) Tubing which is oval and does not easily fit through fitting nut, ferrule and body should never be Forced into the
fitting.
Failure, improper selection or improper us of the products and/or systems described herein or related items can cause
death, personal injury and property damage.
SAFETY AND PRECAUTION IN USING PMT TUBE FITTINGS
Warning
To check the mechanical conformance of the fittings/parts the following test are performed :
A) Material Test
B) Hydro Test
C) Vibration Test
D) Leak Test
E) Dimensional Conformance Test
F) Hardness test
MATERIALS
MATERIAL CODE :
NOTES: -
PMT twin ferrule tube fittings shown in this catalogue are mainly manufactured from stainless steel - 316 material
conforming to chemical requirements of standards as given in the following table. On request the PMT tube fittings can be
supplied in S.S.-304, brass, steel and monel materials conforming to the specifications listed below-
Material availability in fittings on requestTitanium, Hastelloy C, duplex material and other exotic Material on request.
The following symbols are used to indicate different types of material.
316= Stainless steel-316 316L = Stainless steel
304 = Stainless steel - 304 304L = Stainless steel
S = Steel / Carbon steel B = Brass
M = Monel
This catalogue mainly covers twin ferrule type S.S. 316/304 tube fittings for imperial as well as metric tubing with NPT
threads as per ANSI Bl. 20.1 (wherever applicable). Based on requirement, fittings in other material like carbon steel, brass
or monel and with BSPT/BSPP threads can also be supplied.
Most widely used sizes of tube fittings have been covered in this catalogue but other sizes can also be supplied on demand.
The dimensions given in this catalogue are nominal dimensions of fittings in hand tight position.
PMT tube fittings are manufactured to close tolerances and controlled quality. Manufacturing process is precisely
controlled by well established/approved quality assurance progamme. Controlled tolerances and surface finish gaurantee
leak proof tubing connections in high pressure and vacuum applications.
Brastock
ASTM-A-182, BS-970
DIN-4401
ASTM-B-124
BS-2872
ASTM-A576
ASTM-B-164
BS-3076
Material Brastock
Stainless Steel
(316 &304)
Brass
Steel
Monel
ASTM-A-276
ASTM-A-479
BS-970
DIN-4401
ASTM-B-16
ASTM-B453
BS-2874
ASTM-A-108
ASTM-B-164
BS-3076
HOW TO ORDER
FITTING TYPE
PART NUMBER
Example:
PMT tube fittings are ordered by part numbers as listed in this catalogue.
This may be noted that the part number mentioned in this catalogue does not indicate the material of fittings which should
be indicated while ordering the fittings. Fittings being supplied based on part number includes body of fittings, back ferrule
and front ferrule.
Size: Imperial tube and pipe thread sizes are designated by the number of sixteenth of an inch
e. g. 1/2" Tube = 8/16+8, 3/8" NPT = 6/16 = 6.
Metric tube is designated in millimeters and prefixed "M".
e. g. 12 mm tube = M12. The thread size is written in the way as in case of imperial tubing.
A letter or combination of letters are used to designate the type of fittings.
e. g. MC = Male Connector
CODES FOR THREAD TYPE
N = NPT as per ANSI B. l20.1
K = BSPT
R = BSPP
PMT tube fitting part numbers are constructed from symbols that identify the size, type of fitting and material used.
a) 3/8" OD x 1/2 NPT SS 316 Male Connector
6
TUBE O. D.
3/8"
MC
TYPE
MALE CONNECTOR
8
THREAD
SIZE1/2"
N
THREAD TYPE
NPT
316
S. S. 316
PART NUMBER - MC 8 N-316b) 10 m.m. O. D. X 3/8" NPT, S.S. 316- Female Connector
M10
TUBE O. D.
10mm
FC
TYPE
FEMALE CONNECTOR
3/8"
THREAD
SIZE3/8"
N
THREAD TYPE
NPT
316
MATERIAL
S. S. 316
PART NUMBER - M10 FC 6N 316
Dimensions are for reference only and are subjected to change.
MALE CONNECTORImperial Fittings
L
D
L3
F- A/F
ET
P- NPT
L1
L2
G
1-1/16
MALE PART NO. L L1 L3 F ETHREAD
DIMENSION IN INCHES
1/8 PMT-IMC2-2 1.20 0.60 7/16 0.09
1/4 PMT-IMC2-4
1.40 0.60 0.56 9/16
0.09
3/8 PMT-IMC2-6
1.42 0.60 0.56 11/16
0.09
1/2 PMT-IMC2-8
1.67 0.60 0.75 7/8
0.09
1/8 PMT-IMC4-2
1.29 0.70 0.38 1/2
0.20
1/4 PMT-IMC4-4
1.49 0.70 0.56 9/16
0.19
3/8 PMT-IMC4-6 1.51 0.70 0.56 11/16 0.20
1/2 PMT-IMC4-8
1.76 0.70 0.75 7/8
0.19
3/4 PMT-IMC4-12
1.82 0.70 0.75
0.20
1/8 PMT-IMC5 2
1.34 0.73 0.38 9/16
0.19
1/4 PMT-IMC5-4
1.52 0.73 0.56 9/16
0.25
3/8 PMT-IMC5-6
1.55 0.73 0.56 11/16
0.25
1/8 PMT-IMC6-2
1.38 0.76 0.38 5/8
0.20
1/4 PMT-IMC6-4
1.57 0.76 0.56 5/8
0.28
3/8 PMT-IMC6-6
1.57 0.76 0.56 11/16
0.28
1/2 PMT-IMC6-8
1.82 0.76 0.75 7/8
0.28
3/4 PMT-IMC6-12
1.88 0.76 0.75 1-1/16
0.28
1/8 PMT-IMC8-2
1.53 0.86 0.38 13/16
0.19
1/4 PMT-IMC8-4
1.71 0.87 0.56 13/16
0.28
3/8 PMT-IMC8-6
1.71 0.86 0.56 13/16
0.38
1/2 PMT-IMC8-8
1.93 0.87 0.75 7/8
0.41
3/4 PMT-IMC8-12
1.99 0.86 0.75 1-1/16
0.41
1
PMT-IMC8-16
2.28 0.87 0.94 1-3/8
0.41
3/8 PMT-IMC10-6
1.74 0.86 0.56 15/16
0.38
1/2 PMT-IMC10-8
1.93 0.87 0.75 15/16
0.47
3/4 PMT-IMC10-12
1.99 0.86 0.75 1-1/16
0.50
1/2 PMT-IMC12-8 1.99 0.87 0.75 1-1/16 0.47
3/4 PMT-IMC12-12 1.99 0.86 0.75 1-1/16 0.62
1 PMT-IMC12-16 2.28 0.87 0.94 1-3/8 0.61
1/2 PMT-IMC16-8 2.27 1.05 0.75 1-3/8 0.47
3/4 PMT-IMC16-12 2.27 1.05 0.75 1-3/8 0.61
1 PMT-IMC16-16 2.46 1.05 0.94 1-3/8 0.88
L2
0.94
1.14
1.15
1.40
1.00
1.20
1.22
1.47
1.53
1.05
1.23
1.25
1.10
1.28
1.28
1.53
1.59
1.13
1.31
1.31
1.53
1.59
1.85
1.34
1.53
1.59
1.59
1.59
1.85
1.78
1.78
1.97
TUBE O.D.
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
1
1
1
T P
0.38
D
0.50
0.50
0.50
0.50
0.60
0.60
0.60
0.60
0.60
0.64
0.64
0.64
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
0.96
0.96
1.23
1.23
1.23
9/16
G
7/16
7/16
7/16
7/16
9/16
9/16
9/16
9/16
5/8
5/8
5/8
11/16
11/16
11/16
11/16
11/16
7/8
7/8
7/8
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/8
1-½
1-½
1-½
1-1/16
MALE PART NO. L L2 L3 F
ETHREAD
1/8 PMT-IMC2-2 1.20 0.60 7/16 0.09
-
3/8 PMT-IMC2-6
1.42 0.60 0.56 11/16
0.09
-8
1/8 PMT-IMC4-2
1.29 0.70 0.38 1/2
0.19
-
3/8 PMT-IMC4-6 1.51 0.70 0.56 11/16 0.19
1/2 -
3/4 PMT-IMC4-12
1.82 0.70 0.75
0.19
2
1/4 PMT-IMC5-4
1.52 0.73 0.56 9/16
0.25
-
1/8 PMT-IMC6-2
1.38 0.76 0.38 5/8
0.19
-
3/8 PMT-IMC6-6
1.57 0.76 0.56 11/16
0.28
-
3/4 PMT-IMC6-12
1.88 0.76 0.75 1-1/16
0.28
-
1/4 PMT-IMC8-4
1.71 0.86 0.56 13/16
0.28
-
1/2 PMT-IMC8-8
1.93 0.86 0.75 7/8
0.41
-
1
PMT-IMC8-16
2.25 0.86 0.94 1-3/8
0.41
-
1/2 PMT-IMC10-8
1.93 0.86 0.75 15/16
0.47
-
1/2 PMT-IMC12-8 1.99 0.86 0.75 1-1/16 0.47
-
1 PMT-IMC12-16 2.28 0.86 0.94 1-3/8 0.62
- 1-
3/4 PMT-IMC16-12 2.27 1.05 0.75 1-3/8 0.62
1 -16 1.05 1-
L1
0.94
1.15
1.00
1.22
1.53
1.23
1.10
1.28
1.59
1.31
1.53
1.85
1.53
1.59
1.85
1.78
TUBE O.D.
1/8
1/8
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
1
T
0.38
D
0.50
0.50
0.60
0.60
0.60
0.64
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
1.23
9/16
G
7/16
7/16
9/16
9/16
5/8
11/16
11/16
11/16
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-
1-½
1-
HexFlat
HexFlat
P-NPT
Metric Fittings
MALE PART NO. L L2 L3 F
ETHREAD
DIMENSION IN MILLIMETERS
L1TUBE O.D.
TD
6
6
6
6
8
8
8
8
10
10
10
10
10
12
12
12
12
14
14
14
15
16
16
16
18
18
20
20
22
25
25
25
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
1/4
3/8
1/2
1/2
3/8
1/2
3/4
1/2
3/4
1/2
3/4
3/4
1/2
3/4
1
PMT-MMC6 -2
PMT-MMC6 -4
PMT-MMC6 -6
PMT-MMC6 -8
PMT-MMC8 -2
PMT-MMC8 -4
PMT-MMC8 -6
PMT-MMC8 -8
PMT-MMC10-2
PMT-MMC10-4
PMT-MMC10-6
PMT-MMC10-8
PMT-MMC10-12
PMT-MMC12-4
PMT-MMC12-6
PMT-MMC12- 8 PMT-MMC12-12
PMT-MMC14-4
PMT-MMC14-6
PMT-MMC14-8
PMT-MMC15-8
PMT-MMC16-6
PMT-MMC16-8
PMT-MMC16-12
PMT-MMC18-8
PMT-MMC18-12
PMT-MMC20-8
PMT-MMC20-12
PMT-MMC22-12
PMT-MMC25-8
PMT-MMC25-12
PMT-MMC25-16
15.3
15.3
15.3
16.2
16.2
16.2
16.2
16.2
17.2
17.2
17.2
17.2
17.2
22.8
22.8
22.8
22.8
24.4
24.4
24.4
24.4
24.4
24.4
24.4
24.4
24.4
26.0
26.0
26.0
31.3
31.3
31.3
25.4
30.5
31.0
37.3
26.7
31.2
31.8
38.1
28.7
33.3
33.3
38.9
40.4
33.3
33.3
38.9
40.4
34.0
34.0
38.9
38.9
34.0
38.9
40.4
40.4
40.4
42.2
42.2
42.2
45.2
45.2
50.0
32.8
37.9
38.4
44.7
34.2
38.7
39.3
45.6
36.3
40.9
40.9
46.5
48.0
43.4
43.4
49.0
50.5
44.1
44.1
49.0
49.0
44.1
49.0
50.5
50.5
50.5
50.5
52.3
52.3
57.5
57.5
62.3
17.7
17.7
17.7
17.7
18.6
18.6
18.6
18.6
19.5
19.5
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
26.5
26.5
26.5
9.7
14.2
14.2
19.0
9.7
14.2
14.2
19.0
9.5
14.2
14.2
19.0
19.0
14.2
14.2
19.0
19.0
14.2
14.2
19.0
19.0
14.2
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
23.9
14
14
18
22
15
15
18
22
18
18
18
22
27
22
22
22
27
24
24
24
24
24
24
27
27
27
30
30
30
35
35
35
11.1
11.9
4.8
4.8
4.8
4.8
4.8
6.4
6.4
6.4
4.8
7.9
7.9
7.9
7.9
7.1
9.5
9.5
9.5
7.1
9.5
9.5
11.9
12.7
11.9
15.1
11.9
15.9
15.9
11.9
15.9
21.8
G
14
14
14
14
16
16
16
16
19
19
19
19
19
22
22
22
22
25
25
25
25
25
25
30
30
30
32
32
32
38
38
38
HexFlat
HexFlat
P-NPT
Dimensions are for reference only and are subjected to change.
MALE CONNECTOR
L
D
L3
F- A/F
ET
P- NPT
L1
L2
G
Dimensions are for reference only and are subjected to change.
BULK HEAD MALE CONNECTORImperial Fittings
DIMENSION IN MILLIMETERS
TUBE MALE PART NO. L L1 L3 F
Panel Max
E O.D. THREAD
Size Thick.
1/4 PMT-BMMC6 46.2 14.2 16 11.5 10.24.8
½ PMT-BMMC12 57.9 19.0 24 19.5 12.89.5
-4
-8
TL2
33.6
41.8
HexFlat
H
16
24
G
14
22
D
15.3
22.8
Hole Panel
6
12
53.6
68.0
HexFlat
HexFlat
Metric Fittings
BULK HEAD MALE CONNECTOR
L
D L3
E
F
L1
G T
H P- NPT
L2
P-NPT
TUBE MALE PART NO. L L1 L3
F
Panel MaxE
O.D.
THREAD
Size Thick.
1/8
1/8
PMT-BIMC2 1.83
1.57
0.38
1/2
21/64
0.50 0.09
1/4
1/8
PMT-BIMC4 1.95
1.66
0.38
5/8
29/64
0.40 0.19
1/4
1/4
PMT-BIMC4 2.13
1.81
0.56
5/8
29/64
0.40 0.49
3/8
1/4
PMT-BIMC6 2.26
1.97
0.56
3/4
37/64
0.44 0.28 1/2
3/8
PMT-BIMC8 2.49
2.09
0.56
15/16
49/64
0.50 0.37
1/2
1/2
PMT-BIMC8 2.71
2.31
0.75
15/16
49/64
0.50 0.41
3/4 3/4
3.00
2.60
0.75
1-3/16
1-1/64
0.66 0.62
1 1
-2
-2
-4
-4 -6
-8
PMT-BIMC12-12
PMT-BIMC16 -16 3.72 3.19 0.94 1-5/8 1-21/64 0.75 0.88
TL2
1.23
1.32
1.32
1.45 1.65
1.65
1.87
2.27
HexFlat
H
1/2
5/8
5/8
3/4
15/16
15/16
1-3/16
1-5/8
G
7/16
9/16
9/16
11/16
7/8
7/8
1-1/8
1- ½
DIMENSION IN INCHES
D
0.50
0.60
0.60
0.66
0.90
0.90
0.96
1.23
Hole PanelHexFlat
HexFlat
P-NPT
Imperial FittingsMALE ELBOW
L
L3
F- A/FL1
L2
P- NPT
D
T EG
MALE
THREAD
1/4
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
3/4
1
TUBE PART NO. L L2
F
O.D.
PMT-IME2-2 0.93 0.70 7/16
1/8 PMT-IME2-4 0.98 1.00 1/2
1/4 PMT-IME4-2 1.08 0.76
1/4 PMT-IME4-4 1.07 1.00
1/4 PMT-IME4-6 1.17 1.13 11/16
1/4 PMT-IME4-8 1.26 1.31 13/16
5/16 PMT-IME5-2 1.17 0.82 9/16
5/16 PMT-IME5-4 1.17 1.01 11/16
3/8 PMT-IME6-2 1.20 0.82 5/8
3/8 PMT-IME6-4 1.20 1.01 5/8
3/8 PMT-IME6-6 1.26 1.13 11/16
3/8 PMT-IME6-8 1.32 1.31 13/16
3/8 PMT-IME6-12 1.45 1.50 1-1/16
1/2 PMT-IME8-4 1.42 1.12 13/16
1/2 PMT-IME8-6 1.42 1.12 13/16
1/2 PMT-IME8-8 1.43 1.31 13/16
1/2 PMT-IME8-12 1.53 1.50
5/8 PMT-IME10-6 1.43 1.25
5/8 PMT-IME10-8 1.43 1.31 15/16
5/8 PMT-IME10-12 1.56 1.50 1-1/16
3/4 PMT-IME12-8 1.56 1.50
3/4 PMT-IME12-12 1.56 1.50
1 PMT-IME16-12 1.94 1.65 1-3/8
1 PMT-IME16-16 1.94 1.84 1-3/8
D
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
0.96
1.21
1.21
L3
0.38
0.56
0.38
0.56
0.56
0.75
0.38
0.56
0.38
0.56
0.56
0.75
0.75
0.56
0.56
0.75
0.75
0.56
0.75
0.75
0.75
0.75
0.75
0.94
TL1
0.67
0.71
0.77
0.77
0.88
0.96
0.84
0.84
0.91
0.91
0.94
1.02
1.17
1.03
1.03
1.03
1.17
1.10
1.10
1.17
1.17
1.17
1.45
1.45
E
0.09
0.09
0.19
0.19
0.19
0.19
0.19
0.25
0.19
0.28
0.28
0.28
0.28
0.28
0.38
0.41
0.41
0.38
0.47
0.50
0.47
0.62
0.62
0.88
1-1/16
1-1/16
1-1/16
15/16
G
7/16
7/16
9/16
9/16
9/16
9/16
5/8
5/8
11/16
11/16
11/16
11/16
11/16
7/8
7/8
7/8
1
1
1-½
1-½
1-1/8
1-1/8
7/8
1
1/2
1/2
DIMENSION IN INCHES
WrenchPad
HexFlat
1/8 1/8
P-NPT
Dimensions are for reference only and are subjected to change.
TUBE O.D.
6 6 6
6
8
8
8
8
10
10
10
10
12
12
12
12
15
16
16
16
18
18
20
20
22
25
25
PART NO.
PMT-MME6 -2 PMT-MME6 -4
PMT-MME6 -6
PMT-MME6 -8
PMT-MME8 -2
PMT-MME8 -4
PMT-MME8 -6
PMT-MME8 -8
PMT-MME10-2
PMT-MME10-4
PMT-MME10-6
PMT-MME10-8
PMT-MME12-4
PMT-MME12-6
PMT-MME12-8
PMT-MME12-12
PMT-MME15-8
PMT-MME16-6
PMT-MME16-8
PMT-MME16-12
PMT-MME18-8
PMT-MME18-12
PMT-MME20-8
PMT-MME20-12
PMT-MME22-12
PMT-MME25-12
PMT-MME25-16
L
27.0
27.0
29.8
31.8
28.8
28.8
30.6
32.7
31.5
31.5
31.5
33.5
36.0
36.0
36.0
39.8
38.0
38.0
38.0
39.8
39.8
39.8
44.6
44.6
44.6
49.1
49.1
L2
18.8
23.4
26.2
33.0
19.8
24.4
26.2
33.0
21.6
26.2
26.2
33.0
28.2
28.2
33.0
36.8
35.1
30.2
35.1
36.8
36.8
36.8
41.7
41.7
41.7
41.7
46.50
L3
9.7
14.2
14.2
19.0
9.7
14.2
14.2
19.1
9.7
14.2
14.2
19.0
14.2
14.2
19.0
19.0
19.0
14.2
19.0
19.0
19.0
19.0
19.0
19.0
19.0
19.0
23.9
1/2 1/2
11/16
13/16
9/16
9/16
11/16
13/16
11/16
11/16
11/16
13/16
13/16
13/16
13/16
1-1/16
15/16
15/16
15/16
1-1/16
1-1/16
1-1/16
1-3/8
1-3/8
1-3/8
1-3/8
1-3/8
E
4.8
4.8
4.8
4.8
4.8
6.4
6.4
6.4
48
7.1
7.9
7.9
7.1
9.5
9.5
9.5
11.9
9.5
11.9
12.7
11.9
15.1
11.9
15.9
15.9
15.9
21.8
DIMENSION IN MILLIMETERS
L1
19.6 19.6
22.4
24.4
21.3
21.3
23.1
25.1
23.9
23.9
23.9
25.9
25.9
25.9
25.9
29.7
27.9
27.9
27.9
29.9
29.7
29.7
34.5
34.5
34.5
36.8
36.8
D
15.3 15.3
15.3
15.3
16.2
16.2
16.2
16.2
17.2 17.2
17.2
17.2
22.8
22.8
22.8
22.8
24.4
24.4
24.4
24.4
24.4
24.4
26.0
26.0
26.0
31.3
31.3
G
14
14
14
14
16
16
16
16
19
19
19
19
22
22
22
22
25
25
25
25
30
30
32
32
32
38
38
T
HexFlat
WrenchPad
MALE THREAD
1/8 1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/2
3/8
1/2
3/4
1/2
3/4
1/2
3/4
3/4
3/4
1
HP-NPT
Metric FittingsMALE ELBOW
L
L3
F- A/FL1
L2
P- NPT
D
T EG
Dimensions are for reference only and are subjected to change.
Imperial FittingsMALE BRANCH TEE
DIMENSION IN INCHES
TUBE O.D.
1/8
1/8
1/4
1/4
5/16
3/8
3/8
1/2
1/2
5/8
3/4
PART NO.
PMT-IMBT2-2
PMT-IMBT2-4
PMT-IMBT4-2
PMT-IMBT4-4
PMT-IMBT5-2
PMT-IMBT6-4
PMT-IMBT6-6
PMT-IMBT8-6
PMT-IMBT8-8
PMT-IMBT10-8
PMT-IMBT12-12
L5
0.92
0.98
1.06
1.07
1.17
1.20
1.31
1.42
1.43
1.43
1.56
L2
0.70
0.92
0.74
0.92
0.82
1.00
1.11
1.11
1.30
1.41
1.45
L3
0.38
0.56
0.38
0.56
0.38
0.56
0.56
0.56
0.75
0.75
0.75
F
7/16
1/2
1/2
1/2
5/8
5/8
13/16
13/16
13/16
1
1-1/16
E
0.09
0.09
0.19
0.19
0.19
0.28
0.28
0.38
0.41
0.47
0.62
TMALE
THREAD
1/8
1/4
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/2
3/4
P-NPT
L
1.86
1.94
2.12
2.12
2.34
2.40
2.62
2.84
2.84
2.84
3.12
L1
1.34
1.42
1.54
1.54
1.76
1.82
2.04
2.04
2.04
2.26
2.34
L4
0.67
0.71
0.77
0.77
0.88
0.91
1.02
1.02
1.02
1.13
1.17
D
0.50
0.50
0.60
0.60
0.64
0.66
0.66
0.90
0.90
0.96
0.96
G
7/16
7/16
1/2
9/16
9/16
5/8
11/16
7/8
7/8
1
1-1/8
HexFlat
Wrench
Pad
DIMENSION IN MILLIMETERS
6
8
10
12
16
1/8
1/8
1/4
3/8
1/2
PMT-MMBT6-2
PMT-MMBT8-2
PMT-MMBT10-4
PMT-MMBT12-6
PMT-MMBT16-8
1/2
5/8
13/16
13/16
1
4.8
4.8
7.1
9.5
11.9
TUBE O.D.
PART NO.
27.0
29.9
33.5
36.0
38.8
L5
18.8
20.8
28.2
28.2
35.8
L2
9.70
9.70
14.2
14.2
19.1
L3
F
E
TMALE
THREAD
P-NPT
D
G
HexFlat
Wrench
Pad
L1
39.1
44.7
51.8
51.8
57.4
19.6
22.4
25.9
25.9
28.7
L4
L
53.9
59.7
67.0
72.0
77.6
15.3
16.2
17.2
22.8
24.4
14
16
19
22
25
Metric FittingsMALE BRANCH TEE
F-A/F
L3
L5
L
P-NPT
D
L5
GE
L2
L4L4
L1
T
Dimensions are for reference only and are subjected to change.
Dimensions are for reference only and are subjected to change.
DIMENSION IN INCHES
T P-NPT Hex
Flat
WrenchPad
TUBE
MALE THREAD
1/8
1/4
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/2
3/4
PART NO.
PMT-IMRT2- 2
PMT-IMRT2- 4
PMT-IMRT4- 2
PMT-IMRT4- 4
PMT-IMRT5- 2
PMT-IMRT6- 4
PMT-IMRT6- 6
PMT-IMRT8- 6
PMT-IMRT8- 8
PMT-IMRT10-8
PMT-IMRT12 -12
L2
0.93
0.98
1.06
1.07
1.17
1.20
1.31
1.42
1.43
1.43
1.56
L5
0.70
0.92
0.74
0.92
0.82
1.00
1.11
1.11
1.30
1.38
1.45
F
7/16
1/2
1/2
1/2
5/8
5/8
5/8
13/16
13/16
15/16
1-1/16
E
0.09
0.09
0.19
0.19
0.19
0.28
0.28
0.38
0.41
0.47
0.62
O.D.
1/8
1/8
1/4
1/4
5/16
3/8
3/8
1/2
1/2
5/8
3/4
L1
1.37
1.63
1.51
1.69
1.70
1.91
2.13
2.13
2.32
2.48
2.62
L 4
0.67
0.71
0.77
0.77
0.88
0.91
1.02
1.02
1.02
1.10
1.17
L3
0.38
0.56
0.38
0.56
0.38
0.56
0.56
0.56
0.75
0.75
0.75
L
1.63
1.89
1.80
1.98
1.99
2.20
2.42
2.53
2.72
2.88
3.02
D
0.50
0.50
0.60
0.60
0.64
0.66
0.66
0.90
0.90
0.96
0.96
G
7/16
7/16
9/16
9/16
5/8
11/16
11/16
7/8
7/8
1
1-1/8
Imperial FittingsMALE RUN TEE
Metric FittingsMALE RUN TEE
F-A/F
L
L5
L1
G T
L2
L4
L3
L2
E
D
DIMENSION IN MILLIMETERS
T P-NPTHexFlat
WrenchPad
TUBE MALE PART NO. L3
F E
O.D. THREAD
1/8
1/4
1/4
1/4
1/2
PMT-MMRT6 -2
PMT-MMRT6 -4
PMT-MMRT8 4
PMT-MMRT12 -4
PMT-MMRT12 -8
PMT-MMRT16 -16
L
45.8
50.3
55.3
64.2
69.0
73.1
9.70
14.2
14.2
14.2
19.0
19.0
1/2
1/2
5/8
13/16
13/16
15/16
4.8
4.8
6.4
7.1
9.5
12.7
6
6
8
12
12
16 1/2
-
L1
38.4
42.9
47.8
54.1
58.9
63.0
L2
27.0
27.0
29.9
36.0
36.0
38.0
L 4
19.6
19.6
22.4
25.9
25.9
27.9
L5
18.0
23.4
25.4
28.2
33.0
35.0
D
15.3
15.3
16.2
22.8
22.8
24.4
G
14
14
16
22
22
25
Imperial FittingsFEMALE CONNECTOR
DIMENSION IN INCHES
TUBE O.D. THREAD
1/8
1/8
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
1
1
E
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.25
0.28
0.28
0.28
0.28
0.28
0.41
0.41
0.41
0.41
0.50
0.50
0.50
0.62
0.62
0.88
0.88
F
9/16
3/4
9/16
3/4
7/8
1-1/16
9/16
3/4
5/8
3/4
7/8
1-1/16
1-5/16
13/16
7/8
1-1/16
1-5/16
15/16
1-1/16
1-5/16
1-1/16
1-5/16
1-3/8
1-5/8
L3
0.41
0.59
0.38
0.59
0.59
0.78
0.41
0.59
0.41
0.59
0.59
0.78
0.78
0.59
0.59
0.78
0.81
0.59
0.81
0.78
0.81
0.81
0.81
1.00
L2
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.73
0.76
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.05
1.05
L
1.13
1.32
1.23
1.41
1.48
1.67
1.26
1.45
1.29
1.48
1.54
1.73
1.88
1.59
1.65
1.84
1.90
1.65
1.84
1.90
1.84
1.90
2.10
2.45
PART NO.
PMT-IFC2 -2
PMT-IFC2 -4
PMT-IFC4 -2
PMT-IFC4 -4
PMT-IFC4 6
PMT-IFC4 -8
PMT-IFC5 -2
PMT-IFC5 -4
PMT-IFC6 -2
PMT-IFC6 -4
PMT-IFC6 -6
PMT-IFC6 -8
PMT-IFC6 -12
PMT-IFC8 -4
PMT-IFC8 -6
PMT-IFC8 -8
PMT-IFC8 -12
PMT-IFC10 -6
PMT-IFC10 -8
PMT-IFC10 -12
PMT-IFC12 -8
PMT-IFC12 -12
PMT-IFC16 -12
PMT-IFC16 -16
MALE
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
3/4
1
L1
0.87
1.06
0.94
1.12
1.19
1.38
0.97
1.16
1.00
1.19
1.25
1.44
1.59
1.19
1.25
1.44
1.50
1.25
1.44
1.50
1.62
1.97
1.62
1.97
D
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.90
0.96
0.96
0.96
0.96
0.96
1.23
1.23
G
7/16
7/16
9/16
9/16
9/16
9/16
5/8
5/8
11/16
11/16
11/16
11/16
11/16
7/8
7/8
7/8
7/8
1
1
1
1-1/8
1-1/8
1-1/2
1-1/2
T P-NPT
HexFlat
HexFlat
F-A/F
TG
L1
L
D
P-NPT
E
L3
L2
Dimensions are for reference only and are subjected to change.
FEMALE CONNECTORMetric Fittings
F-A/F
TG
L1
L
D
P-NPT
E
L3
L2
Dimensions are for reference only and are subjected to change.
DIMENSION IN MILLIMETERS
T P-NPT
HexFlat
TUBE
O.D.
6 6 6 6 8 8 8 10 10 10 12 12 12
16 20 20 22 25 25
FEMALE
THREAD
1/8 1/4 3/8 1/2 1/8 1/4 3/8 1/4 3/8 1/2 1/4 3/8 1/2
1/2 1/2 3/4 3/4 3/4 1
PART NO.
PMT-MFC6-2 PMT-MFC6-4 PMT-MFC6-6 PMT-MFC6-8 PMT-MFC8-2 PMT-MFC8-4 PMT-MFC8-6 PMT-MFC10-4 PMT-MFC10-6 PMT-MFC10-8 PMT-MFC12-4 PMT-MFC12-6 PMT-MFC12-8
PMT-MFC16-8 PMT-MFC20-8 PMT-MFC20-PMT-MFC22-PMT-MFC25-PMT-MFC25-16
L
31.3 35.8 37.7 42.5 32.1 37.0 38.5 37.8 39.4 44.2 40.3 41.9 46.7
46.9 47.9 49.7 49.7 53.6 62.3
L2
17.7 17.7 17.7 17.7 18.6 18.6 18.6 19.5 19.5 19.5 22.0 22.0 22.0
22.0 22.0 22.0 22.0 26.5 26.5
F
14 19 22 27 15 19 22 19 22 27 22 22 27
27 30 35 35 35 41
E
4.8 4.8 4.8 4.8 6.4 6.4 6.4 7.9 7.9 7.9 9.5 9.5 9.5
12.7 15.9 15.9 18.3 21.8 21.8
L 1
23.9 28.4 30.2 35.1 24.6 29.5 31.0 30.2 31.8 36.6 30.2 31.8 36.6
36.8 37.8 39.6 39.6 41.1 50.0
L3
10.4 15.0 15.0 19.8 10.4 15.0 15.0 15.0 15.0 19.8 15.0 19.5 19.8
19.8 19.8 20.6 20.6 20.6 25.4
D
15.3 15.3 15.3 15.3 16.2 16.2 16.2 17.2 17.2 17.2 22.8 22.8 22.8
24.4 26.0 26.0 26.0 31.3 31.3
G
14 14 14 14 1616161919192222 22
253232323838
12
12
12
HexFlat
Imperial FittingsBULK HEAD FEMALE CONNECTOR
Metric Fittings
BULK HEAD FEMALE CONNECTOR
TUBE FEMALE PART NO. L L1
F
Hole Panel E O.D. THREAD
Size Thick.
6 1/4
12 1/2
PMT-MBFC6-4
PMT-MBFC12-8
51.8
66.5
44.4
56.4
19
27
11.50
19.50
10.20
12.70
4.80
9.50
L2
33.6
41.9
L3
15.0
19.8
L4
26.2
31.8
D
15.3
22.8
Panel Max. G
14
22
DIMENSION IN MILLIMETERS
HexFlat
T P-NPT Fx
16
24
HexFlat
HexFlat
TUBE O.D.
FEMALE THREAD
PART NO. L
L2
F
Size Panel Thick.
E
Hole
Max. Panel
1/8
1/4
1/4
3/8
1/2
1/2
1/8
1/8
1/4
1/4
3/8
1/2
PMT-IBFC2-2
PMT-IBFC4-2
PMT-IBFC4-4
PMT-IBFC6-4
PMT-IBFC8-6
PMT-IBFC8-8
1.76
1.85
2.04
2.17
2.43
2.62
1.23
1.31
1.31
1.44
1.65
1.65
9/16
5/8
3/4
3/4
1-
15/16
1/16
21/64
29/64
29/64
37/64
49/64
49/64
0.50
0.40
0.40
0.44
0.50
0.50
0.09
0.19
0.19
0.28
0.41
0.41
L1
1.50
1.56
1.75
1.88
2.03
2.22
0.41
0.41
0.59
0.59
0.59
0.78
L3
0.97
1.03
1.03
1.16
1.25
1.25
L4
0.50
0.60
0.60
0.66
0.90
0.90
D
G
7/16
9/16
9/16
1/16
7/8
7/8
DIMENSION IN INCHES
T P-NPT
HexFlat
Fx
9/16
5/8
5/8
3/4
15/16
15/16
HexFlat
HexFlat
D
E
F-A/F
L1
Fx-A/F
G T
P-NPTL4
L2
L
T3
Dimensions are for reference only and are subjected to change.
Imperial FittingsFEMALE ELBOW
TUBE FEMALE THREAD
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
3/4
3/4
PART NO.
PMT-IFE2-2
PMT-IFE2-4
PMT-IFE4-2
PMT-IFE4-4
PMT-IFE4-6
PMT-IFE4-8
PMT-IFE5-2
PMT-IFE5-4
PMT-IFE6-2
PMT-IFE6-4
PMT-IFE6-6
PMT-IFE6-8
PMT-IFE8-4
PMT-IFE8-6
PMT-IFE8-8
PMT-IFE10-6
PMT-IFE10-8
PMT-IFE12-8
PMT-IFE12-12
PMT-IFE16-12
L1
0.71
0.82
0.77
0.88
0.96
1.07
0.84
0.91
0.91
0.94
1.02
1.13
1.02
1.02
1.13
1.10
1.17
1.17
1.36
1.45
L4
0.75
0.88
0.75
0.88
0.88
1.12
0.75
0.88
0.75
0.88
0.88
1.12
0.88
0.88
1.12
0.88
1.12
1.12
1.25
1.25
F
1/2
11/16
1/2
11/16
13/16
1
9/16
11/16
5/8
11/16
13/16
1
13/16
13/16
1
15/16
1-1/16
1-1/16
1-3/8
1-3/8
E
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.25
0.28
0.28
0.28
0.28
0.41
0.41
0.41
0.50
0.50
0.62
0.62
0.88
O.D.
1/8
1/8
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
1
L
0.97
1.08
1.07
1.17
1.25
1.35
1.13
1.20
1.20
1.23
1.31
1.42
1.42
1.43
1.53
1.43
1.50
1.57
1.76
1.93
L2
0.60
0.60
0.70
0.70
0.70
0.70
0.73
0.73
0.76
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
L3
0.41
0.59
0.41
0.59
0.59
0.78
0.41
0.59
0.41
0.59
0.59
0.78
0.59
0.59
0.78
0.59
0.78
0.78
0.81
0.81
D
0.50
0.50
0.60
0.60
0.60
0.60
0.64
0.64
0.66
0.66
0.66
0.66
0.90
0.90
0.90
0.96
0.96
0.96
0.96
1.23
G
7/16
7/16
9/16
9/16
9/16
9/16
5/8
5/8
11/16
11/16
11/16
11/16
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-½
HexFlat
DIMENSION IN INCHES
T P-NPT
WrenchPad
E
F-A/F
L2
P-NPT
L4
G T
D
L1
L3
L
Dimensions are for reference only and are subjected to change.
FEMALE ELBOWMetric Fittings
DIMENSION IN MILLIMETERS
TUBE FEMALE O.D. THREAD
6
6
8
10
10
12
12
16
1/8
1/4
1/4
1/8 1/4
1/4
1/2
1/2
PART NO.
PMT-MFE6-2
PMT-MFE6-4
PMT-MFE8-4
PMT-MFE10 -2 PMT-MFE10 -8
PMT-MFE12 -4
PMT-MFE12 -8
PMT-MFE16 -8
L
27.0
29.8
30.6
31.5
33.5
36.0
38.8
39.5
L4
19.0
22.4
22.4
19.0 22.4
22.4
28.4
28.4
F
1/2
11/16
11/16
11/16 13/16
13/16
1
1-1/16
E
4.8
4.8
6.4
7.9 7.9
9.5
9.5
12.7
HexFlat
T P-NPT
WrenchPad
L1
19.6
22.4
23.1
23.9
25.9
25.9
28.7
29.7
L2
17.7
17.7
18.6
19.5
19.5
22.0
22.0
22.0
L3
10.4
15.0
10.4
15.0
15.0
15.0
19.8
19.8
D
15.3
15.3
16.2
17.2 17.2
22.8
22.8
24.4
G
14
14
16
19
19
22
22
25
E
F-A/F
L2
P-NPT
L4
G T
D
L1
L3
L
Dimensions are for reference only and are subjected to change.
Dimensions are for reference only and are subjected to change.
HexFlat
T P-NPTWrench
Pad
TUBE FEMALE PART NO. L
F E
O.D. THREAD
D G
6 1/8
6 1/4
8 1/8
10 1/4
12 1/4
12 3/8
16 1/2 12.7
8 1/4
PMT-MFBT6-2
PMT-MFBT6-4
PMT-MFBT8-2
PMT-MFBT10-4
PMT-MFBT12-4
PMT-MFBT12-6
PMT-MFBT16-8
PMT-MFBT8-4
53.9
59.5
59.7
67.0
72.0
72.0
77.6
61.2
L5
27.0
29.8
29.9
33.5
36.0
36.0
38.8
30.6
1/2
11/16
5/8
13/16
13/16
13/16
1
11/16
4.8
4.8
6.4
7.9
9.5
9.5
7.4
L1
39.1
44.7
44.7
51.8
51.8
51.8
57.4
46.2
L4
19.6
22.4
22.4
25.9
25.9
25.9
28.7
23.1
L6
17.7
17.7
18.6
19.5
22.0
22.0
22.0
18.6
15.3
15.3
16.2
17.2
22.8
22.8
24.4
16.2
14
14
16
19
22
22
25
16
DIMENSION IN MILLIMETERS
L2
19.0
22.4
19.0
22.4
22.4
22.4
28.4
22.4
L3
10.4
15.0
10.4
15.0
15.0
15.0
19.8
15.0
HexFlat
T P-NPTWrench
Pad
TUBE FEMALE PART NO.
F E
O.D. THREAD
1/8
1/4
1/4
3/8
1/2
1/2
1/2
5/8
3/4
1
3/8
3/8
1/8
1/8
1/4
1/4
1/4
3/8
1/2
1/2
3/4
3/4
3/8
½
PMT-IFBT2-2
PMT-IFBT4-2
PMT-IFBT4-4
PMT-IFBT6-4
PMT-IFBT8-4
PMT-IFBT8-6
PMT-IFBT8-8
PMT-IFBT10-8
PMT-IFBT12-12
PMT-IFBT16-12
PMT-IFBT6-6
PMT-IFBT6-8
L
1.94
2.12
2.34
2.46
2.84
2.84
3.06
3.06
3.52
3.86
2.62
2.84
L5
0.97
1.07
1.17
1.23
1.43
1.43
1.53
1.53
1.76
1.94
1.31
1.43
L2
0.75
0.75
0.88
0.88
0.88
0.88
1.12
1.12
1.25
1.25
0.88
1.12
1/2
1/2
11/16
11/16
13/16
13/16
1
1
1-3/8
1-3/8
13/16
1
0.09
0.19
0.19
0.28
0.41
0.41
0.41
0.50
0.62
0.88
0.28
0.28
L1
1.42
1.54
1.76
1.88
2.04
2.04
2.26
2.26
2.72
2.90
2.04
2.26
L4
0.71
0.77
0.88
0.94
1.02
1.02
1.13
1.13
1.36
1.45
1.02
1.13
L6
0.60
0.70
0.70
0.76
0.86
0.86
0.86
0.86
0.86
1.04
0.76
0.76
D
0.50
0.60
0.60
0.66
0.90
0.90
0.90
0.96
0.96
1.23
0.66
0.66
G
7/16
9/16
9/16
11/16
7/8
7/8
7/8
1
1-1/8
1-½
11/16
11/16
DIMENSION IN INCHES
L3
0.41
0.41
0.59
0.59
0.59
0.59
0.78
0.78
0.81
0.81
0.59
0.78
FEMALE BRANCH TEEImperial Fittings
L
L5L5
L6
L3
L2
G T
F-A/X
L1
L4L4
E
P-NPT
D
FEMALE BRANCH TEEMetric Fittings
Dimensions are for reference only and are subjected to change.
FEMALE RUN TEE
TUBE FEMALE O.D. THREAD
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1/8
1/8
1/4
1/4
3/8
1/2
3/4
3/4
PART NO.
PMT-IFRT2-2
PMT-IFRT4-2
PMT-IFRT4-4
PMT-IFRT6-4
PMT-IFRT8-6
PMT-IFRT8-8
PMT-IFRT12-12
PMT-IFRT16-12
1.72
1.81
2.05
2.11
2.30
2.69
3.04
3.18
L
11/16
11/16
F
1/2
1/2
13/16
1-1/16
1-3/8
1-3/8
E
0.09
0.19
0.19
0.28
0.41
0.41
0.61
0.88
0.97
1.01
1.17
1.23
1.42
1.57
1.76
1.93
L2
1.46
1.52
1.76
1.82
1.90
2.29
2.61
2.70
L1
0.71
0.77
0.88
0.94
1.02
1.17
1.36
1.45
L4
0.60
0.70
0.70
0.76
0.86
0.86
0.86
1.04
L6
0.50
0.60
0.60
0.66
0.90
0.90
0.96
1.23
D
9/16
11/16
G
7/16
9/16
7/8
7/8
1- 1/8
1- ½
HexFlat
T P-NPTWrench
Pad
DIMENSION IN INCHES
0.75
0.75
0.88
0.88
0.88
1.12
1.25
1.25
L5
0.41
0.41
0.59
0.59
0.59
0.78
0.81
0.81
L3
Imperial Fittings
FEMALE RUN TEEMetric Fittings
E
L
L4
L2
G T
F-A/XL3
L1
L2
DL6
P-NPT
L5
DIMENSION IN MILLIMETERS 6
6
8
10
12
12
16
1/8
1/4
1/8
1/4
1/4
3/8
1/2
1/2
11/16
5/8
11/16
13/16
13/16
1-1/16
4.8
4.8
6.4
7.9
10.3
9.5
12.7
PMT-MFRT6
PMT-MFRT6
PMT-MFRT8
PMT-MFRT10
PMT-MFRT12
PMT-MFRT12
PMT-MFRT16
-2
-4
-2
-4
-4
-6
-8
TUBE FEMALE O.D. THREAD
PART NO.
L
F
E
27.0
29.8
29.9
33.5
36.0
36.0
39.8
L2
38.6
44.7
41.4
48.3
48.3
48.3
58.1
L1
D
G
HexFlat
T P-NPTWrench
Pad
46.0
52.1
48.9
55.9
58.4
58.4
68.2
L4
19.6
22.4
22.4
25.9
25.9
25.9
29.7
L5
19.0
22.4
19.0
22.1
22.4
22.4
28.4
L3
10.4
15.0
10.4
15.0
15.0
15.0
19.8
L6
17.7
17.7
18.6
19.5
22.0
22.0
22.0
15.3
15.3
16.2
17.2
22.8
22.8
24.4
14
14
16
19
22
22
25
UNION
DIMENSION IN INCHES
HexFlat
TUBE PART NO. O.D.
L2
D
G
L1
HexFlat
TL
1.40
1.61
1.69
1.77
2.02
2.05
2.11
2.55
1/8 PMT-IU2
1/4 PMT-IU4
5/16 PMT-IU5
3/8 PMT-IU6
1/2 PMT-IU8
5/8 PMT-IU10
3/4 PMT-IU12
1 PMT-IU16
0.60
0.70
0.73
0.76
0.86
0.86
0.86
1.05
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
7/16
9/16
5/8
11/16
7/8
-1/8
1-½
0.88
1.03
1.11
1.19
1.22
1.25
1.31
1.59
E
F
7/16
1/2
9/16
5/8
13/16
15/16
1-1/16
1-3/8
0.09
0.19
0.25
0.28
0.41
0.50
0.61
0.86
1
1
Imperial Fittings
6
8
10
12
14
15
16
18
20
22
25
PMT-MU6
PMT-MU8
PMT-MU10
PMT-MU12
PMT-MU14
PMT-MU15
PMT-MU16
PMT-MU18
PMT-MU20
PMT-MU22
PMT-MU25
41.0
43.2
46.2
51.2
52.0
52.0
52.0
53.5
55.0
55.0
65.0
14
15
18
22
24
24
24
27
30
30
35
4.8
6.4
7.9
9.5
11.1
11.9
12.7
15.1
15.9
18.3
21.8
HexFlat
TUBE PART NO. O.D.
L2
D
G L1
HexFlat
TL
E F
DIMENSION IN MILLIMETERS
26.2
28.2
31.0
31.0
31.8
31.8
31.8
33.3
34.8
34.8
40.4
17.7
18.6
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
26.5
15.3
16.2
17.2
22.8
24.4
24.4
24.4
24.4
26.0
26.0
31.3
14
16
19
22
25
25
25
30
32
32
38
UNION
F-A/F
L
L2 L2
D D
TG GT
L1
E
Metric Fittings
Dimensions are for reference only and are subjected to change.
Dimensions are for reference only and are subjected to change.
REDUCING UNIONImperial Fittings
F-A/F
G T
L
L2D
L2x
L1
E G1
D1
T1
HexFlat
HexFlat
T
TUBE O.D.
TUBE PART NO.
1/4
5/16
5/16
3/8
3/8
3/8
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
3/4
1
1
O.D.
1/8
1/8
1/4
1/8
1/4
5/16
1/8
1/4
3/8
3/8
1/2
1/4
3/8
1/2
5/8
1/2
3/4
PMT-IRU4-2
PMT-IRU5-2
PMT-IRU5-4
PMT-IRU6-2
PMT-IRU6-4
PMT-IRU6-5
PMT-IRU8-2
PMT-IRU8-4
PMT-IRU8-6
PMT-IRU10-6
PMT-IRU10-8
PMT-IRU12-4
PMT-IRU12-6
PMT-IRU12-8
PMT-IRU12-10
PMT-IRU16-8
PMT-IRU16-12
L
1.52
1.58
1.67
1.61
1.71
1.75
1.78
1.85
1.91
1.94
2.05
1.95
2.00
2.11
2.11
2.49
2.47
L1
0.97
1.03
1.08
1.06
1.13
1.16
1.09
1.16
1.22
1.25
1.25
1.25
1.31
1.31
1.31
1.61
1.59
L2
0.70
0.73
0.73
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.05
1.05
F
1/2
9/16
9/16
5/8
5/8
5/8
13/16
13/16
13/16
15/16
15/16
1-1/16
1-1/16
1-1/16
1-1/16
1-3/8
1-3/8
E
0.09
0.09
0.19
0.09
0.19
0.25
0.09
0.19
0.28
0.28
0.41
0.19
0.28
0.41
0.50
0.41
0.62
T1 L2x
0.60
0.60
0.70
0.60
0.70
0.73
0.60
0.70
0.76
0.76
0.86
0.70
0.76
0.86
0.86
0.86
0.86
D
0.60
0.64
0.64
0.66
0.66
0.66
0.90
0.90
0.90
0.96
0.96
0.96
0.96
0.96
0.96
1.23
1.23
D1
0.50
0.50
0.60
0.50
0.60
0.64
0.50
0.60
0.66
0.66
0.90
0.60
0.66
0.90
0.96
0.90
0.96
G
9/16
5/8
5/8
11/16
11/16
11/16
7/8
7/8
7/8
1
1
1-1/8
1-1/8
1-1/8
1-1/8
1-½
1-½
G1
7/16
7/16
9/16
7/16
9/16
5/8
7/16
9/16
11/16
11/16
7/8
1 -9/16
1 -11/16
1 -7/8
1
1 -7/8
1 -1/8
HexFlat
DIMENSION IN INCHES
REDUCING UNIONMetric Fittings
F-A/F
G T
L
L2D
L2x
L1
E G1
D1
T1
Dimensions are for reference only and are subjected to change.
DIMENSION IN MILLIMETERS
HexFlat
HexFlat
T
TUBE O.D.
TUBE PART NO.
O.D.
L L1 L2 F
E T1
L2x D D1G G1
HexFlat
8
10
10
12
12
12
16
16
18
25
25
6
6
8
6
8
10
10
12
12
18
20
PMT-MRU8 -6
PMT-MRU10 -6
PMT-MRU10 -8
PMT-MRU12 -6
PMT-MRU12 -8
PMT-MRU12 -10
PMT-MRU16 -10
PMT-MRU16 -12
PMT-MRU18 -12
PMT-MRU25 -18
PMT-MRU25 -20
42.3
44.5
45.1
47.0
47.8
48.7
49.5
52.0
53.5
60.0
62.3
15.3
15.3
16.2
15.3
16.2
17.2
17.2
22.8
22.8
24.4
26.0
15
18
18
22
22
22
24
24
27
35
35
4.8
4.8
6.4
4.8
6.4
7.9
7.9
9.5
9.5
15.1
15.9
27.4
29.5
30.0
29.5
30.2
31.0
31.8
31.8
33.3
38.6
39.9
18.6
19.5
19.5
22.0
22.0
22.0
22.0
22.0
22.0
26.5
26.5
17.7
17.7
18.6
17.7
18.6
19.5
19.5
22.0
22.0
22.0
22.0
16.2
17.2
17.2
22.8
22.8
22.8
24.4
24.4
24.4
31.3
31.3
16
19
19
22
22
22
25
25
30
38
38
14
14
16
14
16
19
19
22
22
30
32
BULKHEAD UNIONImperial Fittings
Metric FittingsBULKHEAD UNION
6
8
10
14
15
16
18
20
32
12
PMT-MBU6
PMT-MBU8
PMT-MBU10
PMT-MBU14
PMT-MBU15
PMT-MBU16
PMT-MBU18
PMT-MBU20
PMT-MBU32
PMT-MBU12
57.7
61.0
63.7
71.0
72.5
72.5
78.9
84.5
128.3
63.7
17.7
18.6
19.5
22.0
22.0
22.0
22.0
22.0
41.6
22.0
33.6
36.1
37.0
42.6
42.6
42.6
47.4
53.0
72.5
41.9
16
18
22
27
27
27
30
35
41
24
11.5
13.1
16.3
22.5
22.8
22.8
26.0
29.0
42.5
19.5
10.2 4.8
11.2 6.4
11.2
7.9
12.7 9.5
12.7 11.9
12.7 12.7
16.8 15.1
23.915.9
19.028.6
12.77.9
T TUBE PART NO. Panel
O.D.
L L2x L2 F Hole Size Thick.
E L1 D G
Panel Max.
DIMENSION IN MILLIMETERS
42.9
46.0
48.5
52.3
52.3
52.3
58.7
64.3
82.3
50.8
15.3
16.2
17.2
24.4
24.4
24.4
24.4
26.0
42.0
22.8
14
16
19
25
25
25
30
32
50
22
HexFlat
F-A/F
E
L
L1
G T GT
DD
F-A/F
L2 L2x
T TUBE PART NO. Panel
O.D. 1/8 PMT-IBU2
1/4 PMT-IBU4
5/16 PMT-IBU5
3/8 PMT-IBU6
1/2 PMT-IBU8
5/8 PMT-IBU10
3/4 PMT-IBU12
1
L
2.02
2.27
2.39
2.45
2.80
2.86
3.11
3.77
L2x
0.60
0.70
0.73
0.76
0.86
0.86
0.86
1.04
L2
1.23
1.31
1.41
1.45
1.65
1.68
1.87
2.27
F
1/2
5/8
11/16
3/4
15/16
1-1/16
1-3/16
1-5/8
Hole Size
21/64
29/64
33/64
37/64
49/64
57/64
1-1/64
1-21/64
Thick.
1/2
17/32
9/16
9/16
19/32
19/32
25/32
15/16
E
0.09
0.19
0.25
0.28
0.41
0.50
0.50
0.88
PMT-IBU16
L1
1.50
1.69
1.81
1.87
2.00
2.06
2.31
2.81
D
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.23
G
7/16
9/16
5/8
11/16
7/8
1
1-1/8
1-1/2
Panel Max.
DIMENSION IN INCHES
HexFlat
HexFlat
Dimensions are for reference only and are subjected to change.
Dimensions are for reference only and are subjected to change.
UNION ELBOWImperial Fittings
T
G T E
F- A/FD
L2L1
L
L
UNION ELBOWMetric Fittings
DIMENSION IN MILLIMETERS
6
8
10
12
14
15
16
18
20
22
25
PMT-MUE6
PMT-MUE8
PMT-MUE10
PMT-MUE12
PMT-MUE14
PMT-MUE15
PMT-MUE16
PMT-MUE18
PMT-MUE20
PMT-MUE22
PMT-MUE25
27.0
28.8
31.5
36.0
38.0
38.8
38.0
39.8
44.6
44.6
49.1
1/2
9/16
11/16
13/16
15/16
15/16
1-1/16
1-3/8
1-3/8
1-3/8
1-3/8
4.8
6.4
7.9
9.5
11.1
11.9
12.7
15.1
15.9
18.3
21.8
TUBE O.D.
PART NO.
L
F
E
L 1
L 2
D
G
T HexFlat
WrenchPad
19.6
21.3
23.9
25.9
27.9
27.9
27.9
29.7
34.5
34.5
36.8
17.7
18.8
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
26.5
15.3
16.2
17.2
22.8
24.4
24.4
24.4
24.4
26.0
26.0
31.3
14
16
19
22
25
25
25
30
32
32
38
TUBE O.D.
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
3/16
1
PART NO.
PMT-IUE2
PMT-IUE4
PMT-IUE5
PMT-IUE6
PMT-IUE8
PMT-IUE10
PMT-IUE12
PMT-IUE14
PMT-IUE3
PMT-IUE16
L
0.88
1.06
1.13
1.20
1.42
1.50
1.57
1.76
1.00
1.93
F
3/8
1/2
9/16
5/8
15/16
1-1/16
1-3/8
1/2
1-3/8
E
0.09
0.20
0.25
0.28
0.41
0.50
0.62
0.72
0.09
0.88
L 1
0.62
0.77
0.84
0.91
1.02
1.10
1.17
1.36
0.74
1.45
L 2
0.60
0.70
0.73
0.76
0.86
0.86
0.86
0.86
0.63
1.04
D
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
0.54
1.23
13/16
G
7/16
9/16
5/8
11/16
1
1-1/8
1-1/4
1/2
1-½
7/8
T
DIMENSION IN INCHES
HexFlat
WrenchPad
Dimensions are for reference only and are subjected to change.
16.2
22.8
24.4
24.4
24.4
24.4
26.0
26.0
PMT-MUT6
8 PMT-MUT8
PMT-MUT10
12 PMT-MUT12
14 PMT-MUT14
15 PMT-MUT15
16 PMT-MUT16
18 PMT-MUT18
20 PMT-MUT20
22 PMT-MUT22
25 PMT-MUT25
53.9
59.7
63.0
72.0
77.6
77.6
77.6
79.5
89.3
89.3
98.3
1/2
5/8
11/16
13/16
1
1
1
1-1/16
1-3/8
1-3/8
1-3/8
4.8
6.4
7.9
9.5
11.1
11.9
12.7
15.1
15.9
18.3
21.8
27.0
29.9
31.5
36.0
38.8
38.8
38.8
38.8
44.6
44.6
49.1
39.1
44.7
47.8
51.8
57.8
57.4
57.4
59.4
69.1
69.1
73.7
19.6
22.4
23.9
25.9
28.7
28.7
28.7
29.7
34.5
34.5
36.8
17.7
18.6
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
26.5
14
16
19
22
25
25
25
30
32
32
38
DIMENSION IN MILLIMETERS
T HexFlat
WrenchPad
TUBE O.D.
PART NO. L F
E L1 L3 L2 L4G
D
15.3
17.2
31.3
10
6
UNION TEEImperial Fittings
L1
L3 L3
T
L
L2L2
F-A/F
L2
L3
E
DL4
D
L4
G
DIMENSION IN INCHES
T HexFlat
WrenchPad
TUBE O.D.
1/8
1/4
5/16
3/8
1/2
5/8
3/4
7/8
PART NO.
PMT-IUT2
PMT-IUT4
PMT-IUT5
PMT-IUT6
PMT-IUT8
PMT-IUT10
PMT-IUT12
PMT-IUT14
L
1.76
2.12
2.34
2.40
2.84
3.06
3.12
3.52
F
3/8
1/2
5/8
5/8
13/16
1
1-1/6
1-3/8
E
0.09
0.19
0.25
0.28
0.41
0.50
0.62
0.72
3/16
PMT-IUT3 1.92
7/16 0.12
1 PMT-IUT16 3.86 1-3/8 0.88
L1
0.88
1.06
1.17
1.20
1.42
1.53
1.57
1.76
0.96
1.93
L3
0.62
0.77
0.88
0.91
1.02
1.13
1.17
1.36
0.70
1.45
L2
1.24
1.54
1.76
1.82
2.04
2.26
2.34
2.72
1.40
2.90
L4
0.60
0.70
0.73
0.76
0.86
0.86
0.86
0.86
0.63
1.04
G
7/16
9/16
5/8
11/16
7/8
1
1-1/8
1-1/4
1-½
1/2
D
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.02
0.54
1.23
UNION TEEMetric Fittings
Dimensions are for reference only and are subjected to change.
G T
LL2
D
L1
L3
F-A/F F-A/F
E T
PMT-IBR4
PMT-IBR6
PMT-IBR8
PMT-IBR10
2.20
2.41
2.87
2.96
0.60
0.66
0.90
0.96
9/16
11/16
7/8
1
0.19
0.28
0.39
0.50
1/4
3/8
1/2
5/8
PMT-IBR16 3.95 1.23 1-1/20.801
1.32
1.45
1.65
1.68
2.26
1.03
1.16
1.25
1.28
1.78
5/8
3/4
15/16
1-1/16
1-5/8
L3 TUBE T
O.D. PART NO. L L2 D
G E
HexFlat
HexFlat
F
DIMENSION IN INCHES
1.91
2.12
2.47
2.56
3.47
L1
29/64
37/64
49/64
57/64
1-21/64
PANEL HOLEDRILL SIZE
0.40
0.44
0.50
0.50
0.75
MAXIMUMPANELTHICK-NESS
REDUCING UNION TEES
L1
L3 L3
L
L2L2
F-A/F
DL4
GE T
L4y D1
T1G1
L2yL3y
Imperial Fittings
DIMENSION IN INCHES
T HexFlat
WrenchPad
TUBE O.D.
3/8
1/2
5/8
3/4
1
PART NO.
PMT-IBRUT6-4
PMT-IBRUT8-4
PMT-IBRUT10 -6
PMT-IBRUT12-6
PMT-IBRUT16-6
L
2.40
2.84
3.06
3.14
3.86
F
5/8
13/16
1
1-1/6
1-3/8
E
0.19
0.19
0.28
0.28
0.28
1 PMT-IBRUT16-8 3.86 1-3/8 0.41
L3
0.91
1.02
1.13
1.17
1.45 1.45
L4
0.76
0.86
0.86
0.86
1.04 1.04
G
11/16
7/8
1
1-1/8
1-1/4 1-½
D
0.66
0.90
0.96
0.96
1.23 1.23
1/2 PMT-IBRUT8-6 2.84 13/16 0.281.02 0.86 7/80.90
3/4 PMT-IBRUT12-8 3.14 1-1/6 0.411.17 0.86 1-1/8 0.96
L1
1.82
2.04
2.26
2.34
2.90 2.90
2.04
2.34
T1 TUBE O.D.
1/4
1/4
3/8
3/8
3/8
3/8
L2
1.20
1.42
1.53
1.57
1.93 1.93
1.42
1.57
L2y
1.14
1.25
1.42
1.46
1.65 1.76
1.31
1.57
L3y
0.85
0.96
1.13
1.17
1.36
1.36
1.02
1.17
L4y
0.70
0.70
0.76
0.76
0.76 0.90
0.76
0.86
HexFlat
G1
9/16
9/16
11/16
11/16
1-1/16
7/8
11/16
7/8
D1
0.60
0.60
0.66
0.66
0.66
0.86
0.66
0.901/2
1/2
BULKHEAD REDUCERImperial Fittings
Dimensions are for reference only and are subjected to change.
L2y1
L3y1
L3F-A/F
L1
L3y
G T
L
L2yL2
T2
G2
G1
L4
D
T1
E
L4y1
L4yD1
D2
5/8
3/4
PMT-IMRUT10-6
PMT-IMRUT12-6
2.95
3.03
1
1-1/6
0.28
0.28
1.13
1.17
0.86
0.86
1
1-1/8
0.96
0.96
1/2 PMT-IMRUT8-6 2.73 13/16 0.28 1.02 0.86 7/80.90
3/8
3/8
3/8
1.13
1.17
1.02
0.76
0.76
0.76
0.66
0.66
0.66
DIMENSION IN INCHES
T HexFlat
WrenchPad
TUBE O.D.
PART NO. L F
E
1.53
1.57
1.42
L2 L3
2.26
2.34
2.04
L1 L4 G
DT1
TUBE O.D.
1.42
1.46
1.31
L2y L3y L4y D1
11/16
11/16
11/16
HexFlat
G1
REDUCING UNION TEES
Metric Fittings
DIMENSION IN INCHES
HexFlat
WrenchPad
PART NO. L F
E L3 L4 G
D L3y
L4y D1 HexFlat
G1 T1
T2
TUBE
O.D.
TUBE
O.D.
T
TUBE
O.D.
1-1/16
1-3/8
0.28
0.28
1.17
1.45
0.86
1.04
1-1/8
1-1/2
0.96
1.33
10.28 1.13 0.86 10.96
1.17
1.36
1.13
0.86
0.86
0.86
0.90
0.96
0.90
7/8
1-1/8
7/81/2 5/8 PMT-IBMRUT10-8-6 3.06 3/8
3/4
3/4
1
PMT-IBMRUT12-8-6
PMT-IBMRUT16-12-6
3.14
3.69
3/8
3/81/2
L1
2.26
2.34
2.81
L2 L2y
1.53 1.53
1.53
1.57
1.57
1.76
L2y1
1.42
1.46
1.65
L3y1& L4y1
0.76
0.76
0.76
D2
0.66
0.66
0.66
HexFlat
G1
11/16
11/16
11/16
L3
F-A/F
G1T1
L1
L3y
G T
E
L2 L2y
L
L2yL4yD1
L4
D
L3y
REDUCING UNION TEES
Metric Fittings
UNION CROSSImperial Fittings
DIMENSION IN INCHES
T HexFlat
WrenchPad
TUBE O.D.
1/8
1/4
5/16
3/8
1/2
5/8
PART NO.
PMT-IUC2
PMT-IUC4
PMT-IUC5
PMT-IUC6
PMT-IUC8
PMT-IUC10
L
1.76
2.12
2.34
2.40
2.84
3.14
F
3/8
1/2
5/8
5/8
13/16
1
E
0.09
0.19
0.25
0.28
0.41
0.62
1 PMT-IUC16 3.86 1-3/8 0.88
L2
0.88
1.06
1.17
1.20
1.42
1.53 1.93
L3
0.62
0.77
0.88
0.91
1.02
1.17
1.45
L1
1.24
1.54
1.76
1.82
2.04
2.34
2.90
L4
0.60
0.70
0.73
0.76
0.86
0.86 1.04
G
7/16
9/16
5/8
11/16
7/8
1 1-½
D
0.50
0.60
0.64
0.66
0.90
0.96
1.23
16.2
22.8
24.4
24.4
26.0
PMT-MUC6
8 PMT-MUC8
PMT-MUC10
12 PMT-MUC12
16 PMT-MUC16
18 PMT-MUC18
20 PMT-MUC20
25 PMT-MUC25
53.9
59.7
67.0
72.0
74.0
76.6
89.3
98.3
1/2
5/8
13/16
13/16
15/16
1-1/16
1-3/8
1-3/8
4.8
6.4
7.9
9.5
12.7
15.1
15.9
21.8
19.6
22.4
25.9
25.9
26.9
28.2
34.5
36.8
17.7
18.6
19.5
22.0
22.0
22.0
22.0
26.5
14
16
19
22
25
30
32
38
DIMENSION IN MILLIMETERS
T HexFlat
WrenchPad
TUBE O.D.
PART NO. L F
E
27.0
29.9
33.5
36.0
37.0
38.3
44.6
49.1
L2 L3
39.1
44.7
51.8
51.8
53.8
56.4
69.1
73.7
L1 L4G
D
15.3
17.2
31.3
10
6
Metric FittingsUNION CROSS
F-A/F
E
L
L2L2
L1
GT
L3
DL4
Dimensions are for reference only and are subjected to change.
Dimensions are for reference only and are subjected to change.
AN UNIONImperial Fittings
E
F-A/F
G T
37°
S
L2D
L
L1
1.38 1/8 PMT-IANU2-4 0.50 7/16 0.09
1.56 3/8 PMT-IANU6-6 0.66 11/16 5/8 0.28
DIMENSION IN INCHES
HexFlat
TUBE PART NO. O.D.
D
G
HexFlat
TL
1.27
1.48
1.51
1.56
1.81
2.42
1/8 PMT-IANU2-2
1/4 PMT-IANU4-4
5/16 PMT-IANU5-5
3/8 PMT-IANU6-4
1/2 PMT-IANU8-8
1 PMT-IANU16-16
0.60
0.76
L2
0.60
0.70
0.73
0.76
0.86
1.04
0.50
0.60
0.64
0.66
0.90
1.23
7/16
9/16
5/8
11/16
7/8
1-½
1.12
1.27
L1
1.01
1.19
1.22
1.27
1.41
1.94
E
F
7/16
1/2
9/16
5/8
13/16
1-3/8
0.06
0.17
0.23
0.17
0.39
0.84
1/4
3/8
TUBE FLARE
AN
1/8
1/4
5/16
1/4
1/2
1
1/2 7/16 -20UNJF
9/16-18UNJF
S
5/16-24UNJF
7/16-20UNJF
1/2-20UNJF
7/16-20UNJF
3/4-16UNJF
1-5/16-12UNJ
SIZE
F-A/F37°
S
L
L3L2
F-A/FL1
D
G T E
T TUBE PART NO. Panel
O.D.
1/4 PMT-IANBU4-4
3/8 PMT-IANBU6 -6
1/2 PMT-IANBU8-8
3/4 PMT-IANBU12-12
1
L
2.12
2.25
2.59
3.11
3.64
L3
1.03
1.16
1.25
1.47
1.78
L1
1.83
1.96
2.19
2.71
3.16
F
5/8
3/4
15/16
1-3/16
1-5/8
Hole Size
29/64
37/64
49/64
1-1/64
1-21/64
Thick.
17/32
9/16
19/32
25/32
15/16
E
0.17
0.28
0.39
0.61
0.84 PMT-IANBU16-16
L2
1.32
1.45
1.65
1.87
2.26
D
0.60
0.66
0.90
0.96
1.23
G
9/16
11/16
7/8
1-1/8
1-1/2
Panel Max.
DIMENSION IN INCHES
HexFlat
1/4
3/8
1/2
3/4
1
TUBE FLARE
AN
SIZE
7/16-20UNJF
9/16-18UNJF
3/4-16UNJF
1-1/16-12UNJF
1-5/16-12UNJF
S
AN BULKHEAD UNIONImperial Fittings
Dimensions are for reference only and are subjected to change.
TUBE SOCKET WELD UNIONImperial Fittings
T H
L
L1
L3
L2
D L4
F-A/F
G T E
DIMENSION IN INCHES
HexFlat
TUBE PART NO. O.D.
L3 D
G
HexFlat
TL
1.14
1.32
1.48
1.62
1.71
2.07
1/8 PMT-ITSWU2
1/4 PMT-ITSWU4
3/8 PMT-ITSWU6
1/2 PMT-ITSWU8
3/4 PMT-ITSWU12
1 PMT-ITSWU16
0.34
0.41
0.47
0.47
0.47
0.56
0.50
0.60
0.66
0.90
0.96
1.23
7/16
9/16
11/16
7/8
-1/8
1-½
E F
7/16
1/2
5/8
13/16
1-1/16
1-3/8
0.09
0.19
0.28
0.41
0.62
0.88
1
L1
0.60
0.70
0.76
0.86
0.86
1.04
L2
0.88
1.03
1.19
1.22
1.31
1.59
L4
0.25
0.31
0.38
0.50
0.56
0.75
H
0.31
0.44
0.62
0.72
1.05
1.31
TUBE SOCKET WELD ELBOWImperial Fittings
L
H
E
T
TG
F-A/F
L1
L3
L1yD
L2
TUBE PART NO.
PMT-ITSWE4
PMT-ITSWE6
PMT-ITSWE8
PMT-ITSWE12
PMT-ITSWE16
L1
0.77
0.91
1.02
1.17
1.45
F
1/2
5/8
13/16
1-1/16
1-3/8
E
0.19
0.28
0.41
0.62
0.88
O.D.
1/4
3/8
1/2
3/4
1
L
1.06
1.20
1.42
1.57
1.93
L2
0.70
0.76
0.86
0.86
1.04
L3
0.31
0.38
0.50
0.56
0.75
D
0.60
0.66
0.90
0.96
1.23
G
9/16
11/16
7/8
1-1/8
1-½
HexFlat
DIMENSION IN INCHES
T
WrenchPad
H
0.50
0.62
0.81
1.06
1.38
L1
0.77
0.91
1.02
1.17
1.45
Dimensions are for reference only and are subjected to change.
L
L1
L2
D
F-A/F
G T E H
L3
37.5°
MALE PIPE WELD CONNECTORImperial Fittings
DIMENSION IN INCHES
HexFlat
TUBE PART NO. O.D.
L2
D
G
L1
HexFlat
TL
1.20
1.29
1.34
1.57
1.71
1.93
1.99
2.45
1/8 PMT-IMPWC2-2
1/4 PMT-IMPWC4-2
5/16 PMT-IMPWC5-2
3/8 PMT-IMPWC6-4
1/2 PMT-IMPWC8-6
5/8 PMT-IMPWC10-8
3/4 PMT-IMPWC12-12
1 PMT-IMPWC16-16
0.60
0.70
0.73
0.76
0.86
0.86
0.86
1.04
0.50
0.60
0.64
0.66
0.90
0.96
0.96
1.23
7/16
9/16
5/8
11/16
7/8
-1/8
1-½
0.94
1.00
1.05
1.28
1.31
1.53
1.59
1.97
E F
7/16
1/2
9/16
5/8
13/16
15/16
1-1/16
1-3/8
0.09
0.19
0.20
0.28
0.41
0.50
0.62
0.88
1
1
1.49 1/4 PMT-IMPWC4-4 0.70 0.60 9/16 1.20 9/16 0.19
1.52 5/16 PMT-IMPWC5-2 0.73 0.64 5/8 1.23 9/16 0.25
1.57 3/8 PMT-IMPWC6-6 0.76 0.66 11/16 1.28 11/16 0.28
1.82 3/8 PMT-IMPWC6-8 0.76 0.66 11/16 1.53 7/8 0.28
1.93 1/2 PMT-IMPWC8-8 0.86 0.90 7/8 1.53 7/8 0.41
1.99 1/2 PMT-IMPWC8-12 0.87 0.90 7/8 1.59 1-1/16 0.41
1/8
1/8
1/8
1/4
3/8
3/4
1
1/4
1/4
3/8
1/2
3/4
PIPEWELD
SIZE
MALE
1/2
1/2
L3
0.38
0.38
0.38
0.56
0.56
0.75
0.75
0.94
0.56
0.56
0.56
0.75
0.75
0.75
H
0.40
0.40
0.40
0.54
0.67
0.84
1.05
1.31
0.54
0.54
0.67
0.84
0.84
1.05
MALE PIPE WELD CONNECTORMetric Fittings
L
L1
L2
D
F-F1 -A/F
G T E H
L3
37.5°
Dimensions are for reference only and are subjected to change.
DIMENSION IN MILLIMETERS
TUBE PART NO. O.D.
L2
D
G
L1
HexFlat
TL
31.2
32.8
34.2
45.6
46.5
49.0
44.1
49.0
4 PMT-MMPWC4-2
6 PMT-MMPWC6-2
8 PMT-MMPWC8-2
8 PMT-MMPWC8-8
10 PMT-MMPWC10-8
12 PMT-MMPWC12-8
14 PMT-MMPWC14-6
15 PMT-MMPWC15-8
16.1
17.7
18.6
18.6
19.5
22.2
22.2
22.2
13.7
15.3
16.2
16.2
17.2
22.8
24.4
24.4
12
14
16
16
19
25
25
24.6
25.4
26.7
38.1
38.9
38.9
34.0
38.9
E
2.4
4.8
5.1
6.4
7.9
9.5
10.3
11.9
22
37.9 6 PMT-MMPWC6-4 17.7 15.3 14 30.5 4.8
38.7 8 PMT-MMPWC8-4 18.6 16.2 16 31.2 6.4
40.9 10 PMT-MMPWC10-4 19.5 17.2 19 33.3 7.1
40.9 10 PMT-MMPWC10-6 19.5 17.2 19 33.3 7.9
43.4 12 PMT-MMPWC12-4 22.2 22.8 22 33.3 7.1
43.4 12 PMT-MMPWC12-6 22.2 22.8 22 33.3 9.5
1/8
1/8
1/8
3/8
1/4
1/4
1/4
1/4
3/8
PIPEWELD
SIZE
MALE
3/8
L3
9.7
9.7
9.7
19.0
19.0
19.0
14.2
19.0
14.2
14.2
14.2
14.2
14.2
14.2
H
10.3
10.3
10.3
21.3
21.3
21.3
17.1
21.3
13.7
13.7
13.7
17.1
13.7
17.1
50.5
79.6
18 PMT-MMPWC18-8
32 PMT-MMPWC32-20
22.2
41.6
24.4
42.0
50
40.4
56.6
13.5
28.6
30
49.0 16 PMT-MMPWC16-8 22.2 24.4 25 38.9 12.7
1-1/4
1/2 19.0
23.2
19.0
21.3
42.2
21.31/2
1/2
1/2
1/2
1/2
HexFlat
F
12
14
15
22
22
22
24
24
14
15
18
18
22
22
27
46
24
F1
9/16
7/8
7/8
7/8
15/16
15/16
9/16
9/16
11/16
11/16
13/16
13/16
1-1/16
46
15/16
1/2
1/2
*
Dimensions are for reference only and are subjected to change.
REDUCERImperial Fittings
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
3/4
3/4
PMT-IR2-2
PMT-IR2-4
PMT-IR4-2
PMT-IR4-4
PMT-IR4-6
PMT-IR4-8
PMT-IR6-4
PMT-IR6-6
PMT-IR6-8
PMT-IR8-4
PMT-IR8-6
PMT-IR8-12
PMT-IR10-12
1.32
1.42
1.45
1.54
1.60
1.82
1.63
1.70
1.91
1.77
1.84
2.12
2.15
0.50
0.50
0.54
0.54
0.60
0.60
0.66
0.66
0.66
0.90
0.90
0.90
0.96
7/16
7/16
9/16
9/16
9/16
9/16
11/16
11/16
11/16
7/8
7/8
7/8
1
0.08
0.09
0.08
0.19
0.19
0.19
0.19
0.28
0.28
0.19
0.28
0.39
0.50
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
5/8
7/8
1
1
PMT-IR10 -14
PMT-IR10-16
PMT-IR12-8
PMT-IR12-16
2.21
2.40
2.15
2.46
0.96
0.96
0.96
0.96
1
1
1-1/8
1-1/8
0.50
0.50
0.39
0.62
5/8
5/8
3/4
3/4
1-1/4
1-1/2
2
PMT-IR16-20
PMT-IR16-24
PMT-IR16-32
3.17
3.51
4.43
1.23
1.23
1.23
1-1/2
1-1/2
1-1/2
0.88
0.88
0.88
1
1
1
1/2
1-1/2 PMT-IR20-24 4.10 1.62 2-1/41-1/4 1.09
1.06
1.16
1.16
1.25
1.31
1.53
1.34
1.41
1.62
1.37
1.44
1.72
1.75
1.81
2.00
1.75
2.06
2.69
3.03
3.95
3.23
0.60
0.60
0.70
0.70
0.70
0.70
0.76
0.76
0.76
0.86
0.86
0.86
0.86
0.86
0.86
0.86
0.86
1.04
1.04
1.04
1.53
7/16
7/16
1/2
1/2
1/2
9/16
5/8
5/8
5/8
13/16
13/16
13/16
15/16
15/16
1-1/16
1-1/16
1-1/16
1-3/8
1-5/8
2-1/8
1-7/8
L2 TUBE T
O.D. TUBE O.D.
T1PART NO. L L1 D
G E
HexFlat
HexFlat
F
DIMENSION IN INCHES
F-A/F
T1
L1
G T
DL2
L
E
Dimensions are for reference only and are subjected to change.
6
6
6
8
8
10
10
10
12
12
12
12
12
16
18
18
18
18
20
20
20
22
22
22
25
25
8
10
12
6
10
6
8
12
6
8
10
16
18
12
12
16
20
25
16
18
25
18
20
25
18
20
PMT-MR6-8
PMT-MR6-10
PMT-MR6-12
PMT-MR8-6
PMT-MR8-10
PMT-MR10-6
PMT-MR10-8
PMT-MR10-12
PMT-MR12 -6
PMT-MR12-8
PMT-MR12-10
PMT-MR12-16
PMT-MR12-18
PMT-MR16-12
PMT-MR18-12
PMT-MR18-16
PMT-MR18-20
PMT-MR18-25
PMT-MR20-16
PMT-MR20-18
PMT-MR20-25
PMT-MR22-18
PMT-MR22-20
PMT-MR25-25
PMT-MR25-18
PMT-MR25-20
14
14
14
15
15
18
18
18
22
22
22
22
22
24
27
27
27
27
30
30
30
30
30
30
35
35
4.8
4.8
4.8
4.6
6.4
4.6
6.4
7.9
4.6
6.4
7.7
9.5
9.5
9.1
9.1
12.7
15.1
15.1
12.7
13.9
15.8
13.9
15.8
18.3
13.9
15.1
39.9
40.7
46.3
40.3
42.0
42.4
43.4
49.8
44.9
45.9
46.7
53.8
53.8
53.0
54.6
56.1
57.6
62.4
57.9
57.9
64.2
57.9
59.4
64.2
63.1
64.6
32.5
33.3
38.9
32.8
34.5
34.8
35.8
42.2
34.8
35.8
36.6
43.7
43.7
42.9
44.5
46.0
47.5
52.3
47.8
47.8
54.1
47.8
49.3
54.1
50.8
52.3
17.7
17.7
17.7
18.6
18.6
19.5
19.5
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
26.5
26.5
15.3
15.3
15.3
16.2
16.2
17.2
17.2
17.2
22.8
22.8
22.8
22.8
22.8
24.4
24.4
24.4
24.4
24.4
26.0
26.0
26.0
26.0
26.0
26.0
31.3
31.3
14
14
14
16
16
19
19
19
22
22
22
22
22
25
30
30
30
30
32
32
32
32
32
32
38
38
TUBE T
O.D. TUBE O.D.
T1 G
HexFlat
HexFlat
F
PART NO. E L L1 L2 D
DIMENSION IN MILLIMETERS
REDUCERMetric Fittings
F-A/F
T1
L1
G T
DL2
L
E
Dimensions are for reference only and are subjected to change.
PORT CONNECTORImperial Fittings
F
L
L1
T E
PMT-IPC2
PMT-IPC4
PMT-IPC6
PMT-IPC8
PMT-IPC12
0.88
0.97
1.03
1.41
1.47
0.09
0.19
0.30
0.39
0.59
1/8
1/4
3/8
1/2
3/4
PMT-IPC16 1.89 0.801
0.37
0.50
0.62
0.87
1.12
TUBE T
O.D. PART NO. L E
F
DIMENSION IN INCHES
0.62
0.74
0.80
1.02
1.09
1.36
L1
0.24
Metric Fittings
PORT CONNECTOR
PMT-MPC6
PMT-MPC8
PMT-MPC10
PMT-MPC12
PMT-MPC15
24.6
25.9
26.1
35.8
37.4
4.4
6.2
8.2
9.1
12.7
6
8
10
12
15
PMT-MPC16 37.4 12.716
11.0
13.1
15.0
19.0
19.0
TUBE T
O.D. PART NO. L E
F
18.7
20.0
20.2
26.0
27.6
27.6
L1
9.0
PMT-MPC18
PMT-MPC20
PMT-MPC25
37.4
38.9
48.0
13.9
15.1
19.8
18
20
25
PMT-MPC28 63.5 23.828
21.0
23.0
28.0
46.0
27.6
29.2
34.5
48.3
PMT-MPC32 69.7 27.432 39.552.4
DIMENSION IN MILLIMETERS
Dimensions are for reference only and are subjected to change.
Imperial Fittings
Metric Fittings
REDUCING PORT CONNECTOR
L
T1 E T F
L2L1
PMT-IRPC6-2
PMT-IRPC8-4
PMT-IRPC12-8
0.91
1.15
1.44
0.09
0.19
0.39
3/8
1/2
3/4
0.50
0.62
0.87
TUBE T
O.D. PART NO. L E
F
DIMENSION IN INCHES
0.53
0.62
0.91
L1
PMT-IRPC4-2 0.89 0.091/4 0.37 0.53
PMT-IRPC6-2 0.98 0.193/8 0.50 0.62
PMT-IRPC8-6 1.20 0.281/2 0.620.69
1/8
1/4
TUBE REDUCED
O.D.
1/8
1/4
3/8
T1
1/2
0.15
0.15
0.15
L2
0.13
0.13
0.13
REDUCING PORT CONNECTOR
PMT-MRPC10-6
PMT-MRPC12-6
PMT-MRPC12-10
25.0
29.1
30.4
4.6
4.6
7.7
10
12
12
13.1
15.0
15.0
TUBE T
O.D. PART NO. L E
F
DIMENSION IN INCHES
15.7
15.7
17.5
L1
PMT-MRPC8-6 24.7 4.68 11.0 15.7
PMT-MRPC10-8 26.0 6.410 13.1 17.0
PMT-MRPC12-8 29.8 6.412 15.016.8
6
6
TUBE REDUCED
O.D.
6
8
8
T1
10
3.4
3.6
3.1
L2
3.1
3.1
3.4
PMT-MRPC28-25 56.5 19.828 34.3 33.0
PMT-MRPC16-12 36.2 9.116 19.0 23.1
PMT-MRPC32-25 60.3 19.832 39.5 33.0
25
12
25
8.2
3.4
9.9
CAPImperial Fittings
L
L2
D
G T
L1
F
DIMENSION IN MILLIMETERS
HexFlat
HexFlat
T
TUBE O.D.
PART NO.
L L1 L2 F
D G
8
10
12
14
15
16
18
20
22
25
PMT-MC8
PMT-MC10
PMT-MC12
PMT-MC14
PMT-MC15
PMT-MC16
PMT-MC18
PMT-MC20
PMT-MC22
PMT-MC25
24.5
26.6
29.1
29.9
29.9
29.9
31.4
34.0
34.0
38.5
15
18
22
24
24
24
27
30
30
35
17.0
19.0
19.0
19.8
19.8
19.8
21.3
23.9
23.9
26.5
18.6
19.5
22.0
22.0
22.0
22.0
22.0
22.0
22.0
26.5
16.2
17.2
17.2
22.8
24.4
24.4
24.4
26.0
26.0
31.3
16
19
22
25
25
25
30
32
32
38
CAPMetric Fittings
HexFlat
HexFlat
T
TUBE O.D.
PART NO.
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1-1/4
PMT-IC4
PMT-IC5
PMT-IC6
PMT-IC8
PMT-IC10
PMT-IC12
PMT-IC12
PMT-IC16
PMT-IC16
L
0.92
0.96
1.01
1.15
1.18
1.24
1.34
1.51
2.10
L1
0.63
0.67
0.72
0.75
0.78
0.84
1.94
1.03
1.23
L2
0.70
0.73
0.76
0.86
0.86
0.86
0.86
1.04
1.53
F
1/2
9/16
5/8
13/16
15/16
1-1/16
1-3/16
1-3/8
1-3/4
D
0.60
0.64
0.66
0.90
0.96
0.96
1.02
1.23
1.62
G
9/16
5/8
11/16
7/8
1
1-1/8
1-1/4
1-½
1-7/8
DIMENSION IN INCHES
1/8
3/16
PMT-IC4
PMT-IC5
0.79
0.84
0.53
0.58
0.60
0.63
7/16
7/16
0.50
0.54
7/16
1/2
Dimensions are for reference only and are subjected to change.
Dimensions are for reference only and are subjected to change.
MALE ADAPTERImperial Fittings
P-NPT
FEE1T
L
L1
1/8
1/8
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
1
1
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
3/4
3/4
1
PMT-IMA2-2
PMT-IMA2-4
PMT-IMA4-2
PMT-IMA4-4
PMT-IMA4-6
PMT-IMA4-8
PMT-IMA5-2
PMT-IMA5-4
PMT-IMA6-2
PMT-IMA6-4
PMT-IMA6-6
PMT-IMA6-8
PMT-IMA8-4
PMT-IMA8-6
PMT-IMA8-8
PMT-IMA10-8
PMT-IMA12-8
PMT-IMA12-12
PMT-IMA16-12
PMT-IMA16-16
1.16
1.38
1.25
1.46
1.49
1.71
1.29
1.50
1.32
1.53
1.56
1.78
1.75
1.78
2.00
2.06
2.06
2.06
2.31
2.60
0.38
0.56
0.38
0.56
0.56
0.75
0.38
0.56
0.38
0.56
0.56
0.75
0.56
0.56
0.75
0.75
0.75
0.75
0.75
0.94
7/16
9/16
7/16
9/16
11/16
7/8
7/16
9/16
7/16
9/16
11/16
7/8
9/16
11/16
7/8
7/8
7/8
1-11/16
1-1/16
1-3/8
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.25
0.28
0.28
0.28
0.28
0.39
0.39
0.39
0.50
0.59
0.59
0.80
0.80
0.19
0.28
0.19
0.19
0.19
0.19
0.19
0.25
0.19
0.28
0.28
0.28
0.28
0.39
0.39
0.47
0.47
0.59
0.62
0.80
DIMENSION IN INCHES
TUBE O.D.
MALE THREAD
PART NO. L L1
F
E1
E
P-NPTT
Dimensions are for reference only and are subjected to change.
MALE ADAPTERMetric Fittings
6 1/8
6 1
8 1/4
10 1/4
10 3/8
10 1/2
12 1/4
12 1/2
PMT-MMA6-2
PMT-MMA6-4
PMT-MMA8-4
PMT-MMA10-4
PMT-MMA10-6
PMT-MMA10-8
PMT-MMA12-4
PMT-MMA12-8
32.8
38.1
39.1
39.9
40.6
46.2
46.2
42.0
9.7
14.2
14.2
14.2
14.2
19.1
14.2
19.1
11.2
14.2
14.2
14.2
17.5
22.4
15.7
22.4
4.6
4.6
6.4
7.1
7.7
7.7
7.7
9.1
4.6
4.6
4.6
7.7
7.7
7.7
9.1
9.1
TUBE O.D.
MALE THREAD
PART NO. L L1
F
E1
E
P-NPTT
DIMENSION IN MILLIMETERS
P-NPT
FEE1T
L
L1
Dimensions are for reference only and are subjected to change.
DIMENSION IN INCHES
TUBE
O.D.
P-NPTT
1
1
PART NO. FEMALE
THREAD
1/8
1/4
1/8
1/4
3/8
1/2
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
3/4
1
3/4
1
PMT-IFA2-2
PMT-IFA2-4
PMT-IFA4-2
PMT-IFA4-4
PMT-IFA4-6
PMT-IFA4-8
PMT-IFA5-4
PMT-IFA6-2
PMT-IFA6-4
PMT-IFA6-6
PMT-IFA6-8
PMT-IFA8-4
PMT-IFA8-6
PMT-IFA8-8
PMT-IFA10-8
PMT-IFA12-8
PMT-IFA12-12
PMT-IFA12-16
PMT-IFA16-12
-16
L
1.24
1.39
1.30
1.46
1.55
1.79
1.48
1.35
1.50
1.59
1.84
1.71
1.79
2.04
2.09
2.08
2.16
2.30
2.39
2.53
L1
0.41
0.59
0.41
0.59
0.59
0.78
0.59
0.41
0.59
0.59
0.78
0.59
0.59
0.78
0.78
0.78
0.81
1.00
0.81
1.00
F
9/16
3/4
9/16
3/4
7/8
1-1/16
3/4
9/16
3/4
7/8
1-1/16
3/4
7/8
1-1/16
1-1/16
1-1/16
1-5/16
1-5/8
1-5/16
1-5/8
E
0.09
0.09
0.19
0.19
0.19
0.19
0.25
0.28
0.28
0.28
0.28
0.39
0.39
0.39
0.50
0.59
0.59
0.59
0.80
0.80
1/8
1/8
1/4
1/4
1/4
1/4
5/16
3/8
3/8
3/8
3/8
1/2
1/2
1/2
5/8
3/4
3/4
3/4
PMT-IFA16
ET F
L1
L
P-NPT
FEMALE ADAPTERImperial Fittings
Dimensions are for reference only and are subjected to change.
FEMALE ADAPTERMetric Fittings
TUBE
O.D.
P-NPTTFEMALE
THREAD
6 1/8
6 1/4
8 1/4
10 1/4
10 3/8
10 1/2
12 1/4
12 3/8
12 1/2
16 1/2
18 3/4
20 1/2
20 3/4
25 1
PART NO.
PMT-MFA6-2
PMT-MFA6-4
PMT-MFA8-4
PMT-MFA10-4
PMT-MFA10-6
PMT-MFA10-8
PMT-MFA12-4
PMT-MFA12-6
PMT-MFA12-8
PMT-MFA16-8
PMT-MFA18-12
PMT-MFA20-8
PMT-MFA20-12
PMT-MFA25-16
L
29.4
34.1
35.1
37.3
37.3
42.1
41.3
42.9
47.6
49.2
52.4
50.0
53.2
66.7
L1
E
14
19
19
19
22
27
19
22
27
27
35
27
35
41
F
4.6
4.6
6.4
7.7
7.7
7.7
9.1
9.1
9.1
12.7
13.9
15.0
15.1
19.8
15.9
15.9
16.7
17.5
17.5
17.5
23.0
23.0
23.0
24.6
24.6
25.6
25.4
31.8
DIMENSION IN MILLIMETERS
P-NPT
ET F
L1
L
F-A/F
37°
L
P-THD.
T E
AN ADAPTERImperial Fittings
DIMENSION IN INCHES
TUBE
O.D.
T
PART NO.
AN
WELD
1/4
3/4
PMT-IANA4-4
PMT-IANA6-4
PMT-IANA6-6
PMT-IANA8-8
PMT-IANA12-12
L
1.46
1.53
1.56
1.91
2.21
E
0.19
0.28
0.28
0.39
0.59
F
5/8
13/16
1-1/8
P
7/16-20 UNF
7/16-20 UNF
9/16-18 UNF
3/4-16 UNF
1-1/16-12 UNF
1/4
3/8
3/4
3/8
1/2
TUBE
SIZE
3/8
1/4
1
PMT-IANA16-16 2.58 0.80
1-3/8
1-5/16-12 UNF
1
FLARE
1/2
THREAD SIZE
1/2
1/2
Dimensions are for reference only and are subjected to change.
WELD ADAPTERImperial Fittings
E1 F
37.5°
L
T E
DIMENSION IN INCHES
TUBE
O.D.
T
PART NO.
MALE
WELD
1/4
3/4
3/8
PMT-IWD4-4
PMT-IWD6-8
PMT-IWD8-8
PMT-IWD8-12
PMT-IWD12-6
L
1.14
1.46
1.66
1.68
1.87
E1
0.30
0.55
0.55
0.73
0.73
F
0.54
0.84
0.84
1.05
1.05
E
0.19
0.28
0.39
0.39
0.59
1/4
3/8
3/4
1/2
1/2
PIPE
SIZE
1/2
1/2
NUT
T
TUBE O.D.
PART NO.
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
PMT-IN4
PMT-IN5
PMT-IN6
PMT-IN8
PMT-IN10
PMT-IN12
PMT-IN16
PMT-IN20
G
9/16
5/8
11/16
7/8
1
1-1/8
1-1/2
1-7/8
DIMENSION IN INCHES
1/8
3/16
PMT-IN4
PMT-IN5
7/16
1/2
L
0.50
0.53
0.56
0.69
0.69
0.69
0.81
1.25
0.47
0.47
1/16 PMT-IN4 5/16 0.31PMT-MN6
PMT-MN8
PMT-MN10
PMT-MN12
PMT-MN15
14
16
19
22
25
6
8
10
12
15
PMT-MN16 2516
TUBE T
O.D. PART NO. G
PMT-MN18
PMT-MN20
PMT-MN25
30
32
38
18
20
25
DIMENSION IN MILLIMETERS
PMT-MN4 124
12.7
13.5
15.1
17.4
17.4
17.4
L
17.4
17.4
20.6
PMT-MN14 2514 17.4
PMT-MN22 3222 17.4
11.9
L
T G
Dimensions are for reference only and are subjected to change.
BACK FERRULE
T
PMT-MBF6
PMT-MBF8
PMT-MBF10
PMT-MBF12
PMT-MBF15
6
8
10
12
15
PMT-MBF1616
TUBE T
O.D. PART NO.
PMT-MBF18
PMT-MBF20
PMT-MBF25
18
20
25
DIMENSION IN MILLIMETERS
PMT-MBF44
PMT-MBF1414
PMT-MBF2222
T
TUBE O.D.
PART NO.
1/4
5/16
3/8
1/2
5/8
PMT-IBF4
PMT-IBF5
PMT-IBF6
PMT-IBF8
PMT-IBF10
DIMENSION IN INCHES
1/8
3/16
PMT-IBF2
PMT-IBF3
1/16 PMT-IBF1
3/4
1
1-1/4
PMT-IBF12
PMT-IBF16
PMT-IBF20
7/8 PMT-IBF14
T
BACK FERRULE FRONT FERRULE BACK & FRONT FERRULE
FRONT FERRULE
T TUBE O.D.
PART NO.
1/4
5/16
3/8
1/2
5/8
3/4
1
1-1/4
PMT-IFF4
PMT-IFF5
PMT-IFF6
PMT-IFF8
PMT-IFF10
PMT-IFF12
PMT-IFF16
PMT-IFF20
DIMENSION IN INCHES
1/8
3/16
PMT-IFF4
PMT-IFF5
1/16 PMT-IFF4
PMT-MFF6
PMT-MFF8
PMT-MFF10
PMT-MFF12
PMT-MFF15
6
8
10
12
15
PMT-MFF1616
TUBE T
O.D. PART NO.
PMT-MFF18
PMT-MFF20
PMT-MFF25
18
20
25
DIMENSION IN MILLIMETERS
PMT-MFF44
PMT-MFF1414
PMT-MFF2222
Mfg & Exp. : Valves & Fittings
A Trusted Name inProcess Instrumentation
ISO 9001:2015 COMPANY Catalogue No.:- PMT-PBV
Visit Us Online at www.pmtvalvesfittings.com
PNEUMATIC ACTUATED BALL VALVES
• •
NPT/BSP, Threads•
PROPORTIONAL RELIEF VALVESPROPORTIONAL RELIEF VALVESPROPORTIONAL RELIEF VALVES
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-PG
Visit Us Online at www.pmtvalvesfittings.com
PRESSURE GAUGE
Manufacturing Standard EN-837 / IS 3624Dial size : 63mm, 100mm, 150mm & 200mm
Mfg & Exp. : Valves & Fittings
A Trusted Name inProcess Instrumentation
CONDENSATE POTS
Visit Us Online at www.pmtvalvesfittings.com
Catalogue No.:- PMT-CDP
• Sizes: 3” to 6”
•
Stainless Steel (316L,316,304,304L),
Carbon Steel,
Pressure Ratings:
• •
ISO 9001:2015 COMPANY
End connections:- NPT,
6,000 PSI
Mfg & Exp. : Valves & Fittings
A Trusted Name inProcess Instrumentation
CATALOGUE CATEGORY
• Sizes: 1/4” to 1”
•
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 6,000 PSI,
• NPT, ISO/BSP, Threads•
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
PROPORTIONAL RELIEF VALVESPROPORTIONAL RELIEF VALVESPROPORTIONAL RELIEF VALVES
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-RFV
Visit Us Online at www.pmtvalvesfittings.com
BLEED AND PURGE VALVE
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
• • Working pressures up to 10,000 psig (689 bar) Working pressures up to 4,000 psig (275 bar)
• •
Male NPT or ISO Thread end connection.Male/female NPT and ISO, SAE threads.
Temperatures up to 850°F (454°C) Temperatures up to 600°F (315°C)
• •
316 stainless steel, carbon steel, alloy 400, oralloy C-276 materials
316 stainless steel, brass, or carbon steel materials.• •
Bleed Valves Purge Valves
Catalogue No.:- PMT-BPV
Visit Us Online at www.pmtvalvesfittings.com
ISO 9001:2015 COMPANY
CHECK VALVE
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
• Sizes: 1/8” to 1”
•
Stainless Steel (316L,316,304,304L), Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 6000 PSI,10,000 PSI
• NPT, ISO/BSP, Threads•
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-CV
Visit Us Online at www.pmtvalvesfittings.com
MANIFOLDS VALVE
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
•
Stainless Steel (316L,316,304,304L), Carbon Steel, Monel, Inconel
Pressure Ratings: 6,000 PSI
• NPT, ISO/BSP, Threads•
2-,3-,and 5-valves Instrument manifolds valves. •
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-MNV
Visit Us Online at www.pmtvalvesfittings.com
THERMOWELLS
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
• Sizes: 1/2” to 2”
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel•
NPT, ISO/BSP, Threads•
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-TH
Visit Us Online at www.pmtvalvesfittings.com
• Sizes: 1/4” to 2”
•
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 3,000 PSI , 6,000 PSI,
• NPT, ISO/BSP, Threads•
BALL VALVES
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-BV
Visit Us Online at www.pmtvalvesfittings.com
NEEDLE VALVE
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
• Sizes: 1/4” to 1”
•
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 6,000 PSI, 10,000 PSI, 15,000 PSI
• NPT, ISO/BSP, Threads•
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-NV
Visit Us Online at www.pmtvalvesfittings.com
Tube Fittings
• Sizes: Fractional: 1/16” - 1” And 2mm to 25mm
•
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 6000 PSI,
• NPT, ISO/BSP, and SAE threads•
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-TF
Visit Us Online at www.pmtvalvesfittings.com
INTEGRAL BLOCK & BLEED VALVE
MONO FLANGE VALVE
Mfg & Exp. : Valves & Fittings
A Trusted Name inValves and Fittings
• Sizes: 1/2” to 3”
• Pressure Ratings: 150# To 2500#
•
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-MBB
Visit Us Online at www.pmtvalvesfittings.com
Carbon steel LF2, F51, Duplex, SuperDuplex, Monel 400, Hastelloy C276, Inconel 625
Titanium, Incolloy 825,
ORIFICE PLATE ASSEMBLY
Mfg & Exp. : Valves & Fittings
A Trusted Name inProcess Instrumentation
Visit Us Online at www.pmtvalvesfittings.com
Catalogue No.:- PMT-OPA
• Sizes: 1/2" to 24"
•
A105N Carbon Steel, A350 LF2 Carbon steel
A182 F 316L/F304/F11/F22 Stainless Steel
Pressure Ratings:
• •
ISO 9001:2015 COMPANY
End connections:- NPT,
300lb to 2500lb
Pipe Fittings
Mfg & Exp. : Valves & Fittings
• Sizes: Fractional: 1/16” - 2”
•
Stainless Steel (316L,316,304,304L),
Brass, Carbon Steel, Monel, Inconel
Pressure Ratings: 6000 PSI,15000 PSI
• NPT, ISO/BSP, and SAE threads•
A Trusted Name inValves and Fittings
ISO 9001:2015 COMPANY
Catalogue No.:- PMT-PF
Visit Us Online at www.pmtvalvesfittings.com
Catalogue No.:- PMT-SPC
•
Stainless Steel (316L,316,304,304L), Alloy
Pressure Ratings:
• •
ISO 9001:2015 COMPANY
End connections:- 1/8", 1/4" and 1/2" Female NPT
Visit Us Online at www.pmtvalvesfittings.com
5000 psig (345 bar)
Sample Cylinders
Mfg & Exp. : Valves & Fittings
A Trusted Name inProcess Instrumentation
PRESSURE REGULATOR
• Maximum inlet Pressure 6,000 psig
•
1/4" NPTF inlet and outlet gauge port Connection
Outlet Pressure 0-2500 psig
• Brass, 316 stainless steel, Monel Materials•
ISO 9001:2015 COMPANY
PRESSURE REGULATOR
Visit Us Online at www.pmtvalvesfittings.com
Catalogue No.:- PMT-PR
Mfg & Exp. : Valves & Fittings
A Trusted Name inProcess Instrumentation
51
A T
rust
ed N
am
e in V
alv
es
and F
itti
ngs
C-6, Shreeji Industrial Estate, Nr. Telephone Exchange,N. H. No.-8, NARODA, Ahmedabad-382 330, Gujarat, India.Tele.\ Fax : +91 079 22823117 Mobile : 091-9825097602/9712997602E-mail : [email protected] [email protected]
www.pmtvalvesfittings.com,
Web :
•
•
Needle Valves
In Line Check Valve
Valves
•
•
Mono Flange ValvesIntegral Block & Bleed ValvesBleed & Purge ValvesThermowellsPressure gauge Accessories
Manifold Valves
Proportional Relief Valves
• • • • •
Instrument Ball Valves•
• Tube Fitting
Fittings
•
Hydraulic Fittings
Pipe Fitting
• High Pressure- Pipe Fitting•
• Forged Steel Cryogenic Globe Valves
Forged Steel Valves
•
Forged Steel Ball Valves
Forged Steel Cryogenic Gate Valves
• Forged Steel Lift check Valves•
Mfg & Exp. : Valves & FittingsAN ISO 9001:2015 COMPANY