1 blueprint reading for the machine trades, sixth edition unit 5: orthographic projection of...
Post on 14-Jan-2016
617 Views
Preview:
TRANSCRIPT
1
Blueprint Reading for the Machine Trades, Sixth
Edition Unit 5: Orthographic Projection of Inclined Planes
Russ Schultz and Larry Smith
PowerPoint presentation created by LaVonne Vichlach
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.2
Foreshortened Views Inclined angles
are at right angles to two of six principal views
Appears as an edge on those two views
Remaining views are foreshortened
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.3
Foreshortened Views Plane a appears as
edge in top and bottom views
Foreshortened in other four-twice visible and twice hidden
Always study adjacent views to determine true shape
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.4
Foreshortened Views Line “E” is created by the edge of principal
plane “V” Both surfaces in the right hand view
represent the true shape
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.5
Foreshortened Views Line “I” is created by the intersection of
inclined plane “W” and the principal plane “X” The right hand view represents one
foreshortened and one true shape
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.6
Foreshortened Views No line is created when curved surface “Y”
runs tangent with the principal plane “Z” Combines foreshortening and true shape
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.7
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #1.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.8
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #2.
E
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.9
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #3.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.10
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #4.
E
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.11
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #5.
E
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.12
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #6.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.13
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #7.
E
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.14
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #8.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.15
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #9.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.16
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #10.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.17
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #11.
F
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.18
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #12.
I
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.19
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #13.
E
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.20
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #14.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.21
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #15.
E
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.22
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #16.
I
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.23
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #17.
F
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.24
Surface Identification 4E: Edge view of surface
I: Intersection of surfaces
F: Foreshortened surface
T: True shape
Identify the condition for circle #18.
T
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.25
Enter the letters into the balloons.
AB
C
D EFG H D
J
J
K
L
L
L
M
N
A
Surface Identification 5
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.26
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.27
A B
DB
C
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.28
EC
B
D
A D
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.29
CB
DAC
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.30
F
B
DA
CHG
E
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.31
F
B D
AC
E
C
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.32
B
B
DA
C
E
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.33
B
B
D
A
CE E
Place the letters from the pictorial views onto their respective surfaces in the orthographic views.
Surface Identification 6
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.34
Angular Dimensions Inclined planes dimensioned two ways
Coordinate method Angular method
Angular method uses one linear and one angular dimension-allows variation to increase with distance from vertex
Coordinate controls accuracy more than angular
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.35
Angular Dimensions Most angular
dimensions held from vertical or horizontal centerline
Easy to calculate other angle from 90
All triangles have 180
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.36
Angular Dimensions Right triangle
always has 90 angle
Other two angles add up to 90
180 total in triangle
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.37
Angular Dimensions Isosceles triangle
has 2 sides equal Two angles are
also equal
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.38
Angular Dimensions Equilateral
triangle has three equal sides
Also has three equal angles
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.39
Angular Dimensions
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.40
Angular Dimensions
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.41
1. Are the inclined planes dimensioned by the coordinate method or the angular method?Angula
r
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.42
2. What is the tolerance assigned to the angular dimensions?
030’
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.43
3. What is the tolerance on the liner dimensions?
.020
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.44
4. What type of line was drawn on the front and the top views to permit them to be shortened?Long
Break
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.45
5. How many hidden lines would appear on a bottom view?
1
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.46
6. How many hidden lines would appear on a left side view?
0
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.47
7. How many inclined planes does the object contain?
2
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.48
8. How many principal planes does the object contain?
8
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.49
9. How much tolerance accumulates with dimension “A?”
.04
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.50
10. What is the MMC of the overall height?
1.32
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.51
Enter the dimension for the letter “A.”
.60
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.52
Enter the dimension for the letter “B.”
.60
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.53
Enter the dimension for the letter “C.”
.70
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.54
Enter the dimension for the letter “D.”
.50
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.55
Enter the dimension for the letter “E.”
1.20
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.56
Enter the dimension for the letter “F.”
.60
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.57
Enter the dimension for the letter “G.”
45
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.58
Enter the dimension for the letter “H.”
.80
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.59
Enter the dimension for the letter “I.”
.20
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.60
Enter the dimension for the letter “J.”
135
Angular Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.61
1. IS
Enter the appropriate letters to describe the surfaces using:
PS: For principal surface
IS: For inclined surface
CS: For curved surface2. PS
3. PS
4. IS
Surface Identification 7
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.62
5. IS
Enter the appropriate letters to describe the surfaces using:
PS: For principal surface
IS: For inclined surface
CS: For curved surface6. PS
7. IS
8. PS
Surface Identification 7
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.63
9. PS
Enter the appropriate letters to describe the surfaces using:
PS: For principal surface
IS: For inclined surface
CS: For curved surface10. CS
11. PS
12. CS
Surface Identification 7
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.64
13. CS
Enter the appropriate letters to describe the surfaces using:
PS: For principal surface
IS: For inclined surface
CS: For curved surface14. IS
15. CS
16. IS
Surface Identification 7
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.65
17. CS
Enter the appropriate letters to describe the surfaces using:
PS: For principal surface
IS: For inclined surface
CS: For curved surface18. IS
19. CS
20. PS
Surface Identification 7
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.66
21. PS
Enter the appropriate letters to describe the surfaces using:
PS: For principal surface
IS: For inclined surface
CS: For curved surface22. IS
23. PS
24. IS
Surface Identification 7
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.67
90
Three sets of parallel lines-calculate the correct angle for each of the following letters:
A
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.68
180
Three sets of parallel lines-calculate the correct angle for each of the following letters:
B
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.69
40
Three sets of parallel lines-calculate the correct angle for each of the following letters:
C
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.70
50
Three sets of parallel lines-calculate the correct angle for each of the following letters:
D
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.71
40
Three sets of parallel lines-calculate the correct angle for each of the following letters:
E
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.72
130
Three sets of parallel lines-calculate the correct angle for each of the following letters:
F
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.73
140
Three sets of parallel lines-calculate the correct angle for each of the following letters:
G
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.74
230
Three sets of parallel lines-calculate the correct angle for each of the following letters:
H
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.75
220
Three sets of parallel lines-calculate the correct angle for each of the following letters:
I
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.76
320
Three sets of parallel lines-calculate the correct angle for each of the following letters:
J
Angular Calculations 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.77
50
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
A
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.78
40
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
B
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.79
50
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
C
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.80
40
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
D
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.81
50
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
E
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.82
40
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
F
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.83
40
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
G
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.84
100
Based on the 40 angular dimensions (NTS) found on the top view, calculate the angular dimensions for the following letters:
H
Angular Calculations 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.85
Included Angle Included angle is
angular measurement taken From one surface to
another Across a conical shape Always less than 180°
Drill points and countersinks commonly dimensioned by included angles
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.86
130
Calculate the angles using the objects to the left.
1. Included angle between A and B:
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.87
140
Calculate the angles using the objects to the left.
2. Included angle between A and C.
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.88
40
Calculate the angles using the objects to the right.
3. Included angle between A and D.
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.89
125
Calculate the angles using the objects to the right.
4. Angle “E”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.90
55
Calculate the angles using the objects to the right.
5. Angle “F”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.91
35
Calculate the angles using the objects to the right.
6. Angle “G”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.92
42
Calculate the angles using the objects to the right.
7. Angle “H”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.93
47 45’
Calculate the angles using the objects to the right.
8. Angle “I”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.94
47
Calculate the angles using the objects to the right.
9. Angle “J”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.95
91
Calculate the angles using the objects to the right.
10. Angle “K”
Angular Calculations 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.96
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
View Selection 5
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.97
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.98
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.99
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.100
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.101
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.102
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.103
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.104
View Selection 5
Circle the letter that identifies the correct orthographic view for each of the pictorial views shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.105
Add the missing lines to the top and/or right side views only. Include the hidden lines.
Missing Lines 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.106
Add the missing lines to the top and/or right side views only. Include the hidden lines.
Missing Lines 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.107
Add the missing lines to the top and/or right side views only. Include the hidden lines.
Missing Lines 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.108
Add the missing lines to the top and/or right side views only. Include the hidden lines.
Missing Lines 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.109
Add the missing lines to the top and/or right side views only. Include the hidden lines.
Missing Lines 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.110
Add the missing lines to the top and/or right side views only. Include the hidden lines.
Missing Lines 1
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.111
Slots And Grooves
Dovetail slots & tee slots (T-slots)-common used to produce reciprocating movement
E.G.-cross feed on a lathe Depth always measured
from surface from which it is cut
Profile view is most descriptive-shows depth and width
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.112
Slots And Grooves
Length of slot is distance over which it extends for function
Included angle of dovetail slot or vee groove is the angle between the two sides
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.113
Slots And Grooves
V-grooves and slots are machined with one tool
Dovetails and T-Slots require two operations Machine primary
opening Finish form tool
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.114
Refer to the two views above, then enter the appropriate dimensions in the table provided.
.35 .40 .70
.60 .30 1.40
.95 .45 2.10
.65 .55 2.80
Groove & Slot Exercise
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.115
1. What is the overall height of the block?
2.50
Sliding Tool Block
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.116
2. What is the depth of the block?
2.00
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.117
3. What is the depth of the vee groove?
.75
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.118
4. What is the depth of the dovetail slot?
.25
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.119
5. What is the width of the vee groove?
1.50
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.120
6. What is the length of the dovetail slot?
2.50
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.121
7. What is the length of the vee groove?
1.00
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.122
8. What is the included angle of the vee groove?
90°
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.123
9. What is the included angle of the dovetail slot?
60°
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.124
10. What view shows the profile of the vee groove?
Front
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.125
11. What view shows the profile of the dovetail slot?
Right-side
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.126
12. How many inclined surfaces does the block contain?
4
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.127
13. How much tolerance accumulates with dimension “A”?
±.03
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.128
Enter the dimension for the letter “A”
.50
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.129
Enter the dimension for the letter “B”
.25
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.130
Enter the dimension for the letter “C”
1.25
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.131
Enter the dimension for the letter “D”
.25
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.132
Enter the dimension for the letter “E”
2.00
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.133
Enter the dimension for the letter “F”
1.00
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.134
Enter the dimension for the letter “G”
.50
Sliding Tool Block
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.135
Place the letters from the front views into their positions in the top view for #1.
A
B
C
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.136
A
B
C
DPlace the letters from the front views into their positions in the top view for #2.
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.137
A
B
C
DPlace the letters from the front views into their positions in the top view for #3.
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.138
A
B
C
D
E
Place the letters from the front views into their positions in the top view for #4.
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.139
A
B
C
D
E
Place the letters from the front views into their positions in the top view for #5.
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.140
A
B
C
D
E
FPlace the letters from the front views into their positions in the top view for #6.
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.141
A
B
C
D
E
FPlace the letters from the front views into their positions in the top view for #7.
Surface Identification 8
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.142
Refer to the drawing to determine the values for the angular dimensions for each letter.
A=120°
Angular Calculations 4
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.143
B=135°
C=125°
Refer to the drawing to determine the values for the angular dimensions for each letter.
Angular Calculations 4
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.144
D=56°
E=16°
Refer to the drawing to determine the values for the angular dimensions for each letter.
Angular Calculations 4
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.145
F=90°
G=66°
Refer to the drawing to determine the values for the angular dimensions for each letter.
Angular Calculations 4
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.146
H=99°
I=100°J=40°
Refer to the drawing to determine the values for the angular dimensions for each letter.
Angular Calculations 4
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.147
K=89°
L=28°M=14°
Refer to the drawing to determine the values for the angular dimensions for each letter.
Angular Calculations 4
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.148
1. What is the tolerance on the height dimension?
±.01
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.149
2. What is the MMC of the 3.812 dimension?
3.817
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.150
3. How many inclined planes does the object contain?
4
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.151
4. What angle is the bottom of the base from vertical?
81°30’
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.152
5. What angle is the 28°47’ surface from vertical?
61°13’
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.153
6. What is the maximum angular dimension for the 28°47’ surface? (Include the tolerance in your answer.)
29°17’
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.154
7. What is the included angle between the two bottom inclined surfaces? (See balloon 7.)
163°
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.155
8. What is the included angle between the two top inclined surfaces? (See balloon 8.)
106° 13’
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.156
9. How many lines in the side view represent intersections of surfaces only, not edges?
3
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.157
10. How many lines in the top view represent intersections of surfaces only, not edges?
7
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.158
Enter the dimensions for the letter
.56
A
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.159
.58
Enter the dimensions for the letter
B
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.160
.11
Enter the dimensions for the letter
C
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.161
.33
Enter the dimensions for the letter
D
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.162
.22
Enter the dimensions for the letter
E
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.163
.78
Enter the dimensions for the letter
F
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.164
1.07
Enter the dimensions for the letter
G
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.165
1.906
Enter the dimensions for the letter
H
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.166
1.00
Enter the dimensions for the letter
I
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.167
.85
Enter the dimensions for the letter
J
Angular Base
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.168
Circle the letter that represents the correct right side view the the shape shown
View Selection B
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.169
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.170
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.171
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.172
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.173
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.174
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.175
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.176
View Selection B
Circle the letter that represents the correct right side view the the shape shown
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.177
Add the missing lines to complete the view. Include all hidden lines.
Missing Lines 2
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.178
Missing Lines 2
Add the missing lines to complete the view. Include all hidden lines.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.179
Missing Lines 2
Add the missing lines to complete the view. Include all hidden lines.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.180
Missing Lines 2
Add the missing lines to complete the view. Include all hidden lines.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.181
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.182
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.183
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.184
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.185
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.186
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.187
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.188
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.189
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.190
View Selection 7
Select the correct orthographic view to correspond with the arrowhead for each pictorial view shown.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.191
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.192
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.193
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.194
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.195
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.196
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.197
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.198
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.199
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.200
View Selection 8
Each balloon represents the position of a missing view. Select the correct view.
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.201
1. What is the length of the tee slot?
3.48
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.202
2. What is the depth of the dovetail slot?
.32
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.203
3. What is the length of the dovetail slot?
1.10
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.204
4. How much tolerance can accumulate in the full depth of the tee slot?
±.020
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.205
5. How many inclined surfaces does the tool slide contain?
6
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.206
6. What angle is created between the two sides of the dovetail slot?70°
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.207
7. What angle is created between the two outside edges in the top view?
40°
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.208
8. What is the MMC of the overall depth of the tool slide? (Top and right side views.)1.00
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.209
9. What is the MMC of the drilled holes? (Observe separate tolerance for drilled holes.)
.248
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.210
10. How many lines (include hidden) in the front view represent surface intersections only, not edges?
12
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.211
What is the dimension for the letter
40°
A
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.212
What is the dimension for the letter
80°
B
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.213
What is the dimension for the letter
50°
C
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.214
What is the dimension for the letter
35°
D
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.215
What is the dimension for the letter
.52
E
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.216
What is the dimension for the letter
.46
F
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.217
What is the dimension for the letter
.10
G
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.218
What is the dimension for the letter
.58
H
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.219
What is the dimension for the letter
.30
I
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.220
What is the dimension for the letter
.58
J
Tool Slide
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.221
Sketch additional shapes that would correspond with the orthographic views shown to the left.
Similar View Sketches
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.222
Sketch additional shapes that would correspond with the orthographic views shown to the left.
Similar View Sketches
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.223
Sketch additional shapes that would correspond with the orthographic views shown to the left.
Similar View Sketches
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.224
Add the missing right-sides view to each of the objects shown above.
Missing View 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.225
Add the missing right-sides view to each of the objects shown above.
Missing View 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.226
Add the missing right-sides view to each of the objects shown above.
Missing View 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.227
Add the missing right-sides view to each of the objects shown above.
Missing View 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.228
Add the missing right-sides view to each of the objects shown above.
Missing View 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.229
Add the missing right-sides view to each of the objects shown above.
Missing View 3
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.230
The front side and right-side views are complete, with no missing lines. Can you solve the top view?
Brain Teaser
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.231
The front side and right-side views are complete, with no missing lines. Can you solve the top view?
Brain Teaser
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.232
The front side and right-side views are complete, with no missing lines. Can you solve the top view?
Brain Teaser
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.233
The front side and right-side views are complete, with no missing lines. Can you solve the top view?
Brain Teaser
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.234
The front side and right-side views are complete, with no missing lines. Can you solve the top view?
Brain Teaser
Schultz and Smith: Blueprint Reading for the Machine Trades, 6th edition
© 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.235
The front side and right-side views are complete, with no missing lines. Can you solve the top view?
Brain Teaser
top related