1 hvacr316 - piping torches, tips, tanks torches, tips, tanks

1

HVACR316 - PipingHVACR316 - Piping

Torches,Tips,Tanks

Torches,Tips,Tanks

2

2

Torches, Tips & TanksTorches, Tips & Tanks

• Soldering is a process used to join piping and tubing to fittings. It is used primarily in plumbing and heating systems utilizing copper and brass piping and fittings.

• continue

• Soldering is a process used to join piping and tubing to fittings. It is used primarily in plumbing and heating systems utilizing copper and brass piping and fittings.

• continue

3

3

Torches, Tips & TanksTorches, Tips & Tanks

• Soldering often called soft soldering, is done at temperatures under 800 degrees F. usually in the 361 degrees F to 500 degrees F range.

• Soldering often called soft soldering, is done at temperatures under 800 degrees F. usually in the 361 degrees F to 500 degrees F range.

4

4

Torches, Tips & TanksTorches, Tips & Tanks

• Propane. butane, air-acetylene or oxyacetylene torches are the most commonly used sources of heat when soldering or brazing. A propane or butane torch can be ignited easily and adjusted to the type and size of joint being soldered, various tips are available

• Propane. butane, air-acetylene or oxyacetylene torches are the most commonly used sources of heat when soldering or brazing. A propane or butane torch can be ignited easily and adjusted to the type and size of joint being soldered, various tips are available

5

5

6

6

Torches, Tips & TanksTorches, Tips & Tanks

• When soldering or brazing, there is a gap between the two surfaces that are fastened together

• When soldering or brazing, there is a gap between the two surfaces that are fastened together

7

7

8

8

Torches, Tips & TanksTorches, Tips & Tanks

• When two lengths of copper tubing are fastened together, a fitting or coupling may be placed between them into which each pipe slides. A clearance is required for the tubing to slide into the coupling or fitting.

• continue

• When two lengths of copper tubing are fastened together, a fitting or coupling may be placed between them into which each pipe slides. A clearance is required for the tubing to slide into the coupling or fitting.

• continue

9

9

Torches, Tips & TanksTorches, Tips & Tanks

• A filler metal must be used to fill this clearance. The filler metal actually adheres to the tubing and fitting to be joined as it fills the gap. Only the filler metal melts.

• A filler metal must be used to fill this clearance. The filler metal actually adheres to the tubing and fitting to be joined as it fills the gap. Only the filler metal melts.

10

10

11

11

Torches, Tips & TanksTorches, Tips & Tanks

• Brazing requires higher temperatures, is often called silver brazing and is similar to soldering. It is used to join tubing and piping in air conditioning and refrigeration systems.

• continue

• Brazing requires higher temperatures, is often called silver brazing and is similar to soldering. It is used to join tubing and piping in air conditioning and refrigeration systems.

• continue

12

12

Torches, Tips & TanksTorches, Tips & Tanks

• In the brazing process, temperatures over 800 degrees F are used. The differences in temperature are necessary due to the different combinations of alloys used in the filler metals.

• In the brazing process, temperatures over 800 degrees F are used. The differences in temperature are necessary due to the different combinations of alloys used in the filler metals.

13

13

Torches, Tips & TanksTorches, Tips & Tanks

• Air Acetylene torch kit – The air acetylene torch kit consists of a pressurized tank of acetylene, an acetylene regulator, a hose, a torch handle and a torch tip. There are various sizes of standard tips available

• continue

• Air Acetylene torch kit – The air acetylene torch kit consists of a pressurized tank of acetylene, an acetylene regulator, a hose, a torch handle and a torch tip. There are various sizes of standard tips available

• continue

14

14

15

15

Torches, Tips & TanksTorches, Tips & Tanks

• When attaching the hose connection, the red hose is attached to the acetylene regulator with left handed threads. The green hose is attached to the oxygen regulator with right handed threads

• continue

• When attaching the hose connection, the red hose is attached to the acetylene regulator with left handed threads. The green hose is attached to the oxygen regulator with right handed threads

• continue

16

16

17

17

Torches, Tips & TanksTorches, Tips & Tanks

• The torch body is then attached to the hoses and the appropriate tip to the torch.

• The torch body is then attached to the hoses and the appropriate tip to the torch.

18

18

19

19

Torches, Tips & TanksTorches, Tips & Tanks

• Safety Precaution : All connections must be free from dirt, dust, grease and oil. Oxygen can produce an explosion when in contact with grease or oil. A reverse flow valve should be used somewhere in the hose. These valves allow the gas to flow in one direction only, this will prevent the two gases from mixing in the hose.

• Safety Precaution : All connections must be free from dirt, dust, grease and oil. Oxygen can produce an explosion when in contact with grease or oil. A reverse flow valve should be used somewhere in the hose. These valves allow the gas to flow in one direction only, this will prevent the two gases from mixing in the hose.