1 mew mechanical safety sweep & brake for mechanical assist system patent pending!

Post on 30-Mar-2015

217 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

1

Mew Mechanical Safety Sweep & Brake for Mechanical Assist System

Patent Pending!

Positioning Statement Safety Comes Standard! Safety is one of the top three customer

drivers for purchasing mobile storage. The Spacesaver Group wants to provide

logical stepping stone (bracketing tool) for selling up to powered systems, therefore, Spacesaver is adding a purely mechanical in-aisle stop mechanism to its mechanical assist (MA) product offering.

2

Key Features Purely mechanical floor-level safety

sweep covering both sides of every MA carriage (requiring no battery or line power to operate).

3

4

Mechanical Safety Sweep & Brake Mechanical Assist System w/ In-Aisle

Safety

5

Mechanical Safety Sweep & Brake3” (76mm) High, Spring-loaded Sweep Plate

6

Mechanical Safety Sweep & Brake Heavy –duty Clutch Brake Sheathed, Stainless Steel Cables Galvanized Antuators

7

Mechanical Safety Sweep & Brake Automatic Reset No Electric Line Power or Battery Power

Required

8

Installation Feedback Estimated incremental installation time

for the new MA safety accessory is only 30 minutes on a 12' long MA carriage.

Eclipse with Dual Photo Sweeps* 5.5 hrs/carriage

MA w/ Battery Powered Brake 4.15 hrs/carriage

MA w/ New MA Safety 2.5 hrs/carriage

MA w/ No In-Aisle Safety 2 hrs/carriage

Carriage Layout with Safety Sweep & Brake

9

Actuator Cable Cable connection

bracket Clutch Brake Sweep

Product Details

10

Cycle testing to 5,000 brake activations shows a consistent stopping distance of 2-3 inches (5-8 cm) max.

A space-efficient 2 inch (6 cm) dimensional allowance between carriages

Automatic reset (slight back-turn required) For std. profile LS carriages (15-48 in. w.) For std. profile Synchro carriages (18-48

in. w.) All guidance types (RG, DF & CF) allowed

Patent Pending!

Planning Boundaries

11

Not available on Low Profile (LP) carriages.

Use RSP “specials” process for ●Notched carriages●Piggy-Back carriages●Carriages > 48” (1219mm) wide●Retrofits●Cabinets on carriages

–Access inside carriage is needed for service. When using Delta cabinets, specify access panels.

Safety Comes Standard!

12

Configura automatically adds the new Mechanical Safety Sweep & Brake every time you draw a LS or Synchro mechanical assist system. It’s that simple!

top related