1000310000_cat2_h_en
Post on 31-Mar-2016
212 Views
Preview:
DESCRIPTION
TRANSCRIPT
H
H.1
Sig
na
ls &
da
ta
5.0
8 m
m p
itc
hPCB plug-in connectors
Male connectors with solder connection H.2
Male connectors with clamping yoke connection H.10
Socket connectors with clamping yoke connection H.12
Socket connectors with TOP connection H.14
Socket connectors with crimp connection H.16
Signals & data
5.08 mm pitch
Contents
H.2
H
Male connectors with solder connection
Sig
nals
& d
ata
5.08
mm
pit
ch
SLA 90
Glass fibre-reinforced and thus dimensionally sta-ble, angled male connector with integral aid to pre-vent wrong connections. Available with open orclosed sides. Fixing blocks can be attached to theclosed version to ensure cable glands are vibra-tion-resistant. The solder pin length of 3.2 mm hasbeen optimised for wave soldering. Supplied incardboard box.
• 400 V (IEC) / 300 V (UL)• 17.5 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2
Solid H05(07) V-U mm2
Stranded H07 V-R mm2
Flexible H05(07) V-K mm2
Flexible with ferrule mm2
Ferrule with plastic collar mm2
Stripping length mmScrewdriver blade mm
according to normTightening torque range Nm
Rated currentat ambient temperature 20°C 40°C
A 17.5 16
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 10 10AWG conductor
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Gold-plated contact surfaces on request
• Rated current related to rated cross-section and min. No. of
poles.
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
10121416182022
0 20 40 60 80 100 120
SLA / BLA / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
02
468
1012
1416
0 20 40 60 80 100 120
SLA / BLA / H05V-K0.5
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
02468
1012141618
0 20 40 60 80 100 120
SLA / BLAT / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
0
5
10
15
20
25
0 20 40 60 80 100 120
SLA / BLAC / H07V-K2.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (8-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
SLA 90
L1+P 120.472"
9,4
0.3
7"
100.394"
1,3 +0,1
L1
P
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 12380600003 10.16 (0.400) 100 12381600004 15.24 (0.600) 100 12382600005 20.32 (0.800) 50 12383600006 25.40 (1.000) 50 12384600007 30.48 (1.200) 50 12385600008 35.56 (1.400) 50 12386600009 40.64 (1.600) 50 1238760000
10 45.72 (1.800) 50 123886000011 50.80 (2.000) 50 123896000012 55.88 (2.200) 50 123906000013 60.96 (2.400) 50 123916000014 66.04 (2.600) 50 123926000015 71.12 (2.800) 50 123936000016 76.20 (3.000) 50 123946000017 81.28 (3.200) 20 127176000018 86.36 (3.400) 20 127186000019 91.44 (3.600) 20 127196000020 96.52 (3.800) 20 127206000021 101.60 (4.000) 20 127216000022 106.68 (4.200) 20 131596000023 111.76 (4.400) 20 131606000024 116.84 (4.600) 20 1316160000
H.3
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Male connectors with solder connection
SLA 90B
L1+P+2 120.472"
9,4
0.3
7"
100.394"
1,3 +0,1
L1
P
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 12410600003 10.16 (0.400) 100 12411600004 15.24 (0.600) 100 12412600005 20.32 (0.800) 50 12413600006 25.40 (1.000) 50 12414600007 30.48 (1.200) 50 12415600008 35.56 (1.400) 50 12416600009 40.64 (1.600) 50 1241760000
10 45.72 (1.800) 50 124186000011 50.80 (2.000) 50 124196000012 55.88 (2.200) 50 124206000013 60.96 (2.400) 50 124216000014 66.04 (2.600) 50 124226000015 71.12 (2.800) 50 124236000016 76.20 (3.000) 50 124246000017 81.28 (3.200) 20 127026000018 86.36 (3.400) 20 127036000019 91.44 (3.600) 20 127046000020 96.52 (3.800) 20 127056000021 101.60 (4.000) 20 127066000022 106.68 (4.200) 20 131566000023 111.76 (4.400) 20 131576000024 116.84 (4.600) 20 1315860000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
Floodlight indicator SLA FLASee chapter accessories
H.4
H
Male connectors with solder connection
Sig
nals
& d
ata
5.08
mm
pit
ch
SLA 180
Glass fibre-reinforced and thus dimensionally sta-ble, angled male connector with integral aid to pre-vent wrong connections. Available with open orclosed sides. Fixing blocks can be attached to theclosed version to ensure cable glands are vibra-tion-resistant. The solder pin length of 3.2 mm hasbeen optimised for wave soldering. Supplied incardboard box.
• 400 V (IEC) / 300 V (UL)• 17.5 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2
Solid H05(07) V-U mm2
Stranded H07 V-R mm2
Flexible H05(07) V-K mm2
Flexible with ferrule mm2
Ferrule with plastic collar mm2
Stripping length mmScrewdriver blade mm
according to normTightening torque range Nm
Rated currentat ambient temperature 20°C 40°C
A 17.5 16
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 10 10AWG conductor
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Gold-plated contact surfaces on request
• Rated current related to rated cross-section and min. No. of
poles.
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
10121416182022
0 20 40 60 80 100 120
SLA / BLA / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
02
468
1012
1416
0 20 40 60 80 100 120
SLA / BLA / H05V-K0.5
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
02468
1012141618
0 20 40 60 80 100 120
SLA / BLAT / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
0
5
10
15
20
25
0 20 40 60 80 100 120
SLA / BLAC / H07V-K2.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (8-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
SLA 180
L1+P
12
0.4
72
"
3 ,80.15"
9,40.37"
1,3 +0,10.051"
L1P
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 12395600003 10.16 (0.400) 100 12396600004 15.24 (0.600) 100 12397600005 20.32 (0.800) 50 12398600006 25.40 (1.000) 50 12399600007 30.48 (1.200) 50 12400600008 35.56 (1.400) 50 12401600009 40.64 (1.600) 50 1240260000
10 45.72 (1.800) 50 124036000011 50.80 (2.000) 50 124046000012 55.88 (2.200) 50 124056000013 60.96 (2.400) 50 124066000014 66.04 (2.600) 50 124076000015 71.12 (2.800) 50 124086000016 76.20 (3.000) 50 124096000017 81.28 (3.200) 20 127126000018 86.36 (3.400) 20 127136000019 91.44 (3.600) 20 127146000020 96.52 (3.800) 20 127156000021 101.60 (4.000) 20 127166000022 106.68 (4.200) 20 131506000023 111.76 (4.400) 20 131516000024 116.84 (4.600) 20 1315260000
H.5
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Male connectors with solder connection
SLA 180B
L1+P+2
12
0.4
72
"
3 ,80.15"
9,40.37"
1,3 +0,10.051"
P
L1
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 12425600003 10.16 (0.400) 100 12426600004 15.24 (0.600) 100 12427600005 20.32 (0.800) 50 12428600006 25.40 (1.000) 50 12429600007 30.48 (1.200) 50 12430600008 35.56 (1.400) 50 12431600009 40.64 (1.600) 50 1243260000
10 45.72 (1.800) 50 124336000011 50.80 (2.000) 50 124346000012 55.88 (2.200) 50 124356000013 60.96 (2.400) 50 124366000014 66.04 (2.600) 50 124376000015 71.12 (2.800) 50 124386000016 76.20 (3.000) 50 124396000017 81.28 (3.200) 20 127076000018 86.36 (3.400) 20 127086000019 91.44 (3.600) 20 127096000020 96.52 (3.800) 20 127106000021 101.60 (4.000) 20 127116000022 106.68 (4.200) 20 131536000023 111.76 (4.400) 20 131546000024 116.84 (4.600) 20 1315560000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
H.6
H
Male connectors with solder connection
Sig
nals
& d
ata
5.08
mm
pit
ch
SLAD 90
Glass fibre-reinforced and thus dimensionally sta-ble, angled male connector with integral aid to pre-vent wrong connections. Available with open orclosed sides. Fixing blocks can be attached to theclosed version to ensure cable glands are vibra-tion-resistant. The solder pin length of 3.2 mm hasbeen optimised for wave soldering. Supplied incardboard box.
• 400 V (IEC) / 300 V (UL)• 10 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2
Solid H05(07) V-U mm2
Stranded H07 V-R mm2
Flexible H05(07) V-K mm2
Flexible with ferrule mm2
Ferrule with plastic collar mm2
Stripping length mmScrewdriver blade mm
according to normTightening torque range Nm
Rated currentat ambient temperature 20°C 40°C
A 10 8.5
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 7 7AWG conductor
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Rated current related to rated cross-section and min. No. of
poles.
• Spacing between rows: see hole layout
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
1012141618
0 20 40 60 80 100 120
SLAD 90 / BLA / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (48-pole)
min. No. of poles (4-pole)
Conductor current to EN 60947-7-1
0
2
4
6
8
10
12
0 20 40 60 80 100 120
SLAD 90 / BLA / H05V-K0.5
max. No. of poles (48-pole)
min. No. of poles (4-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
SLAD 90
L1+P P/2
27
,21
.07
"
22,20.872"
100.394"
PL1P/2
10
,16
0.4
00
"
1,3 +0,10.051"
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
4 5.08 (0.200) 50 13200600006 10.16 (0.400) 50 13201600008 15.24 (0.600) 50 1372460000
10 20.32 (0.800) 50 137256000012 25.40 (1.000) 50 137266000014 30.48 (1.200) 20 137276000016 35.56 (1.400) 20 137286000018 40.64 (1.600) 20 137296000020 45.72 (1.800) 20 137306000022 50.80 (2.000) 10 137316000024 55.88 (2.200) 10 137326000026 60.96 (2.400) 10 137336000028 66.04 (2.600) 10 137346000030 71.12 (2.800) 10 137356000032 76.20 (3.000) 10 137366000034 81.28 (3.200) 10 137376000036 86.36 (3.400) 10 137386000038 91.44 (3.600) 10 137396000040 96.52 (3.800) 10 137406000042 101.60 (4.000) 10 137416000044 106.68 (4.200) 10 137426000046 111.76 (4.400) 10 137436000048 116.84 (4.600) 10 1374460000
H.7
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Male connectors with solder connection
SLAD 90B
L1+P+2L1+P+0.079"
P/2
27
,21
.07
0"
22,20.872"
100.394"
PL1P/2
10
,16
0.4
00
"
1,3 +0,10.051"
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
4 5.08 (0.200) 50 13206600006 10.16 (0.400) 50 13207600008 15.24 (0.600) 50 1388560000
10 20.32 (0.800) 50 138866000012 25.40 (1.000) 50 138876000014 30.48 (1.200) 20 138886000016 35.56 (1.400) 20 138896000018 40.64 (1.600) 20 138906000020 45.72 (1.800) 20 138916000022 50.80 (2.000) 10 138926000024 55.88 (2.200) 10 138936000026 60.96 (2.400) 10 139066000028 66.04 (2.600) 10 139076000030 71.12 (2.800) 10 139086000032 76.20 (3.000) 10 139096000034 81.28 (3.200) 10 139106000036 86.36 (3.400) 10 139116000038 91.44 (3.600) 10 139126000040 96.52 (3.800) 10 139136000042 101.60 (4.000) 10 139146000044 106.68 (4.200) 10 139156000046 111.76 (4.400) 10 139166000048 116.84 (4.600) 10 1391760000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Disconnection elementSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
H.8
H
Male connectors with solder connection
Sig
nals
& d
ata
5.08
mm
pit
ch
SLAD 180
Glass fibre-reinforced and thus dimensionally sta-ble, angled male connector with integral aid to pre-vent wrong connections. Available with open orclosed sides. Fixing blocks can be attached to theclosed version to ensure cable glands are vibra-tion-resistant. The solder pin length of 3.2 mm hasbeen optimised for wave soldering. Supplied incardboard box.
• 400 V (IEC) / 300 V (UL)• 10 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2
Solid H05(07) V-U mm2
Stranded H07 V-R mm2
Flexible H05(07) V-K mm2
Flexible with ferrule mm2
Ferrule with plastic collar mm2
Stripping length mmScrewdriver blade mm
according to normTightening torque range Nm
Rated currentat ambient temperature 20°C 40°C
A 10 8.5
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 7 7AWG conductor
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Rated current related to rated cross-section and min. No. of
poles.
• Spacing between rows: see hole layout
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
1012141618
0 20 40 60 80 100 120
SLAD 180 / BLA / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (48-pole)
min. No. of poles (4-pole)
Conductor current to EN 60947-7-1
0
2
4
6
8
10
12
0 20 40 60 80 100 120
SLAD 180 / BLA / H05V-K0.5
max. No. of poles (48-pole)
min. No. of poles (4-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
SLAD 180
5,60.221"
27,21.070"
22
,20
.87
2"
L 1+P P/2
PL1
P/2
17
,78
0.7
00
"
1,3 +0,10.051"
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
4 5.08 (0.200) 50 13208600006 10.16 (0.400) 50 13209600008 15.24 (0.600) 50 1374560000
10 20.32 (0.800) 50 137466000012 25.40 (1.000) 50 137476000014 30.48 (1.200) 20 137486000016 35.56 (1.400) 20 137496000018 40.64 (1.600) 20 137506000020 45.72 (1.800) 20 137516000022 50.80 (2.000) 10 137526000024 55.88 (2.200) 10 137536000026 60.96 (2.400) 10 137546000028 66.04 (2.600) 10 137556000030 71.12 (2.800) 10 137566000032 76.20 (3.000) 10 137576000034 81.28 (3.200) 10 137586000036 86.36 (3.400) 10 137596000038 91.44 (3.600) 10 137606000040 96.52 (3.800) 10 137616000042 101.60 (4.000) 10 137626000044 106.68 (4.200) 10 137636000046 111.76 (4.400) 10 137646000048 116.84 (4.600) 10 1376560000
H.9
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Male connectors with solder connection
SLAD 180B
5,60.221"
27,21.070"
L1+P+2L1+P+0.079"
P/2
22
,20
.87
2"
PL1
P/2
17
,78
0.7
00
"
1,3 +0,10.051"
Ordering dataSolder pin length 3.2 mm
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
4 5.08 (0.200) 50 13214600006 10.16 (0.400) 50 13215600008 15.24 (0.600) 50 1392760000
10 20.32 (0.800) 50 139286000012 25.40 (1.000) 50 139296000014 30.48 (1.200) 20 139306000016 35.56 (1.400) 20 139316000018 40.64 (1.600) 20 139326000020 45.72 (1.800) 20 139336000022 50.80 (2.000) 10 139346000024 55.88 (2.200) 10 139356000026 60.96 (2.400) 10 139486000028 66.04 (2.600) 10 139496000030 71.12 (2.800) 10 139506000032 76.20 (3.000) 10 139516000034 81.28 (3.200) 10 139526000036 86.36 (3.400) 10 139536000038 91.44 (3.600) 10 139546000040 96.52 (3.800) 10 139556000042 101.60 (4.000) 10 139566000044 106.68 (4.200) 10 139576000046 111.76 (4.400) 10 139586000048 116.84 (4.600) 10 1395960000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Disconnection elementSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
H.10
H
Male connectors with clamping yoke connection
Sig
nals
& d
ata
5.08
mm
pit
ch
SLAS
Male connector with screw conductor connectionfor flying leads. Snap-on feet for mounting on theterminal rail and fixing blocks to ensure cableglands are vibration-resistant are available for thismale connector with clamping yoke connection.The SLAS provides space for labelling and can becoded. Supplied packed in cardboard box.
• 0.2 - 2.5 mm2 (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 16 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2 0.13…3.31Solid H05(07) V-U mm2 0.2…2.5Stranded H07 V-R mm2
Flexible H05(07) V-K mm2 0.2…1.5Flexible with ferrule mm2 0.2…1.5Ferrule with plastic collar mm2 0.2…1.5Stripping length mm 7Screwdriver blade mm 0.6 x 3.5
according to norm DIN 5264Tightening torque range Nm 0.4...0.5
Rated currentat ambient temperature 20°C 40°C
A 16 14
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor 26-12
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 10 10AWG conductor 26-12
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Rated current related to rated cross-section and min. No. of
poles.
• Wire end ferrule without plastic collar to DIN 46228 pt 1
• Wire end ferrule with plastic collar to DIN 46228 pt 4
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
101214161820
0 20 40 60 80 100 120
SLAS / BLA / H07V-K1.5
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
0
2
4
6
8
10
12
0 20 40 60 80 100 120
SLAS / BLA / H05V-K0.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
SLAS B
L1+P+2
10.8
L1+P+0.079" 0.878"
0.425"
22.3
P
L1
0.6
77
"1
7.2
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
4 15.24 (0.600) 100 15718200006 25.40 (1.000) 50 15718300008 35.56 (1.400) 50 1571840000
10 45.72 (1.800) 50 157185000012 55.88 (2.200) 50 157186000014 66.04 (2.600) 50 157187000016 76.20 (3.000) 50 157188000020 96.52 (3.800) 20 157189000024 116.84 (4.600) 20 1571900000
H.11
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Male connectors with clamping yoke connection
SLAS B with RF15
L1+P
PL1
30
,21
.18
9"
39,41.551"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
4 15.24 (0.600) 20 18459000006 25.40 (1.000) 20 18459100008 35.56 (1.400) 10 1845920000
10 45.72 (1.800) 10 184593000012 55.88 (2.200) 10 184594000016 76.20 (3.000) 5 184595000020 96.52 (3.800) 5 176331000024 116.84 (4.600) 5 1845960000
SLAS B with KF
PL1
L1+P+2
42
,91
.68
8"
42,51.673"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.20 96.52 (3.800) 5 1766140000
Accessories
CodingSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
ScrewdriverSee chapter accessoriesOrder No. 9008390000
H.12
H
Socket connectors with clamping yoke connection
Sig
nals
& d
ata
5.08
mm
pit
ch
BLA
Socket connectors with the clamping yoke con-nection system. The principle of the vibration-proofscrew connection and the Unimate Range pin ar-rangement provides a unique security during ope-ration. Also available with dovetail (B) for conve-nient attachment of fixing blocks. The BLA has alabelling panel and can be coded. Supplied incardboard box.
• 0.2 - 2.5 mm2 (IEC) / 26 - 12 AWG (UL)• 400 V (IEC) / 300 V (UL)• 17.5 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2 0.13…3.32Solid H05(07) V-U mm2 0.2…2.5Stranded H07 V-R mm2
Flexible H05(07) V-K mm2 0.2…1.5Flexible with ferrule mm2 0.2…1.5Ferrule with plastic collar mm2 0.2…1.5Stripping length mm 7Screwdriver blade mm 0.6 x 3.5
according to norm DIN 5264Tightening torque range Nm 0.4...0.5
Rated currentat ambient temperature 20°C 40°C
A 17.5 16
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor 26-12
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 10 10AWG conductor 26-12
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Gold-plated contact surfaces on request
• Rated current related to rated cross-section and min. No. of
poles.
• Wire end ferrule without plastic collar to DIN 46228 pt 1
• Wire end ferrule with plastic collar to DIN 46228 pt 4
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
10121416182022
0 20 40 60 80 100 120
SLA / BLA / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
02
468
1012
1416
0 20 40 60 80 100 120
SLA / BLA / H05V-K0.5
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
02468
1012141618
0 20 40 60 80 100 120
SLAD 180 / BLA / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (48-pole)
min. No. of poles (4-pole)
Conductor current to EN 60947-7-1
02468
101214161820
0 20 40 60 80 100 120
SLAS / BLA / H07V-K1.5
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
BLA
L1+P
PL1
15
,20
.59
8"
11,60.457"
20,00.787"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 12817600003 10.16 (0.400) 100 12818600004 15.24 (0.600) 100 12819600005 20.32 (0.800) 50 12820600006 25.40 (1.000) 50 12821600007 30.48 (1.200) 50 12822600008 35.56 (1.400) 50 12823600009 40.64 (1.600) 50 1282460000
10 45.72 (1.800) 50 128256000011 50.80 (2.000) 50 128266000012 55.88 (2.200) 50 128276000013 60.96 (2.400) 50 128286000014 66.04 (2.600) 50 128296000015 71.12 (2.800) 50 128306000016 76.20 (3.000) 50 128316000017 81.28 (3.200) 20 128326000018 86.36 (3.400) 20 128336000019 91.44 (3.600) 20 128346000020 96.52 (3.800) 20 128356000021 101.60 (4.000) 20 128366000022 106.68 (4.200) 20 131426000023 111.76 (4.400) 20 131436000024 116.84 (4.600) 20 1314460000
H.13
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Socket connectors with clamping yoke connection
BLA B
PL1
L1+P+2L1+P+0.079"
15
,20
.59
8"
11,60.457"
20,00.787"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 13560600003 10.16 (0.400) 100 13561600004 15.24 (0.600) 100 13562600005 20.32 (0.800) 50 13563600006 25.40 (1.000) 50 13564600007 30.48 (1.200) 50 13565600008 35.56 (1.400) 50 13566600009 40.64 (1.600) 50 1356760000
10 45.72 (1.800) 50 135686000011 50.80 (2.000) 50 135696000012 55.88 (2.200) 50 135706000013 60.96 (2.400) 50 135716000014 66.04 (2.600) 50 135726000015 71.12 (2.800) 50 135736000016 76.20 (3.000) 50 135746000017 81.28 (3.200) 20 135756000018 86.36 (3.400) 20 135766000019 91.44 (3.600) 20 135776000020 96.52 (3.800) 20 135786000021 101.60 (4.000) 20 135796000022 106.68 (4.200) 20 135806000023 111.76 (4.400) 20 135816000024 116.84 (4.600) 20 1358260000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
ScrewdriverSee chapter accessoriesOrder No. 9008390000
H.14
H
Socket connectors with TOP connection
Sig
nals
& d
ata
5.08
mm
pit
ch
BLAT
Socket connectors with TOP connection systemenable the clamping screw to be tightened parallelwith the wire and so result in a high connectiondensity. Also available with dovetail (B) for conve-nient attachment of fixing blocks. The BLAT has alabelling panel and can be coded. Supplied incardboard box.
• 0.2 - 2.5 mm2 (IEC) / 26 - 14 AWG (UL)• 400 V (IEC) / 300 V (UL)• 15 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2 0.13…2.5Solid H05(07) V-U mm2 0.2…2.5Stranded H07 V-R mm2
Flexible H05(07) V-K mm2 0.2…2.5Flexible with ferrule mm2 0.2…1.5Ferrule with plastic collar mm2 0.2…1.5Stripping length mm 13Screwdriver blade mm 0.6 x 3.5
according to norm DIN 5264Tightening torque range Nm 0.4...0.5
Rated currentat ambient temperature 20°C 40°C
A 15 13
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 400Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor 26-14
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 10 10AWG conductor 26-14
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material CuSnMaterial of contact surface tinned
Information
• Additional colours on request
• Gold-plated contact surfaces on request
• Rated current related to rated cross-section and min. No. of
poles.
• Wire end ferrule without plastic collar to DIN 46228 pt 1
• Wire end ferrule with plastic collar to DIN 46228 pt 4
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
02468
1012141618
0 20 40 60 80 100 120
SLA / BLAT / H07V-K1.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
02
468
1012
1416
0 20 40 60 80 100 120
SLA / BLAT / H05V-K0.5
max. No. of poles (24-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
BLAT
PL1
P+L1
12
,20
.48
0"
23,40.921"
31,81.252"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 14842600003 10.16 (0.400) 100 14843600004 15.24 (0.600) 100 14844600005 20.32 (0.800) 50 14845600006 25.40 (1.000) 50 14846600007 30.48 (1.200) 50 14847600008 35.56 (1.400) 50 14848600009 40.64 (1.600) 50 1484960000
10 45.72 (1.800) 50 148506000011 50.80 (2.000) 50 148516000012 55.88 (2.200) 50 148526000013 60.96 (2.400) 50 148536000014 66.04 (2.600) 50 148546000015 71.12 (2.800) 50 148556000016 76.20 (3.000) 50 148566000017 81.28 (3.200) 20 148576000018 86.36 (3.400) 20 148586000019 91.44 (3.600) 20 148596000020 96.52 (3.800) 20 148606000021 101.60 (4.000) 20 148616000022 106.68 (4.200) 20 148626000023 111.76 (4.400) 20 148636000024 116.84 (4.600) 20 1486460000
H.15
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Socket connectors with TOP connection
BLAT B
PL1
L1+P+2L1+P+0.079"
12
,20
.48
0"
23,40.921"
31,81.252"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 14865600003 10.16 (0.400) 100 14866600004 15.24 (0.600) 100 14867600005 20.32 (0.800) 50 14868600006 25.40 (1.000) 50 14869600007 30.48 (1.200) 50 14870600008 35.56 (1.400) 50 14871600009 40.64 (1.600) 50 1487260000
10 45.72 (1.800) 50 148736000011 50.80 (2.000) 50 148746000012 55.88 (2.200) 50 148756000013 60.96 (2.400) 50 148766000014 66.04 (2.600) 50 148776000015 71.12 (2.800) 50 148786000016 76.20 (3.000) 50 148796000017 81.28 (3.200) 20 148806000018 86.36 (3.400) 20 148816000019 91.44 (3.600) 20 148826000020 96.52 (3.800) 20 148836000021 101.60 (4.000) 20 148846000022 106.68 (4.200) 20 148856000023 111.76 (4.400) 20 148866000024 116.84 (4.600) 20 1488760000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
ScrewdriverSee chapter accessoriesOrder No. 9008390000
H.16
H
Socket connectors with crimp connection
Sig
nals
& d
ata
5.08
mm
pit
ch
BLAC
Socket connectors with crimp connection systemenable rational prefabrication of cable looms byless skilled operatives and guarantee a distinctcost-saving. The BLAC is also available with dove-tail (B) for convenient attachment of fixing blocks.Supplied in cardboard box.
• 0.22 - 2.5 mm2 (IEC) / 26 - 14 AWG (UL)• 500 V (IEC) / 300 V (UL)• 20 A (IEC) / 10 A (UL)
Technical dataRated data to IEC 60664-1 / IEC 61984
Clamping range, max. mm2 0.22…2.5Solid H05(07) V-U mm2
Stranded H07 V-R mm2
Flexible H05(07) V-K mm2
Flexible with ferrule mm2
Ferrule with plastic collar mm2
Stripping length mm 5Screwdriver blade mm
according to normTightening torque range Nm
Rated currentat ambient temperature 20°C 40°C
A 20 17.5
Overvoltage category III III IIPollution severity 3 2 2
Rated voltage V 250 320 500Rated impulse voltage kV 4 4 4
a UL 1059 rated data B C D
Nominal voltage V 300 300Rated current A 10 10AWG conductor 26-14
r CSA C22.2 rated data B C D
Rated voltage V 300 300Rated current A 10 10AWG conductor 26-14
Material data
Type of insulating material PBT GFFlammability class acc. UL94 V-0Contact base material Cu alloyMaterial of contact surface
Information
• Additional colours on request
• Rated current related to rated cross-section and min. No. of
poles.
• Rated cross-section depends on crimp contact used.
• P on drg. = pitch
• Rated data refer only to the component itself. Clearance and
creepage distances to other components are to be designed
in accordance with the relevant application standards.
Derating curve
0
5
10
15
20
25
0 20 40 60 80 100 120
SLA / BLAC / H07V-K2.5
Ambient temperature T [°C]
Load
cur
rent
I [A
]
max. No. of poles (8-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
02468
1012141618
0 20 40 60 80 100 120
SLA / BLAC / H05V-K0.5
max. No. of poles (8-pole)
min. No. of poles (2-pole)
Conductor current to EN 60947-7-1
Ambient temperature T [°C]
Load
cur
rent
I [A
]
BLAC R
L1+P
PL1
10
,10
.39
8"
16,20.638
24,60.978"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 15782200003 10.16 (0.400) 100 14779600004 15.24 (0.600) 100 14780600005 20.32 (0.800) 50 15774800006 25.40 (1.000) 50 14781600007 35.56 (1.400) 50 15774900008 35.56 (1.400) 50 14782600009 40.64 (1.600) 50 1577500000
10 45.72 (1.800) 50 147836000011 45.72 (1.800) 50 157751000012 55.88 (2.200) 50 147846000013 60.96 (2.400) 50 160112000014 66.04 (2.600) 50 159416000015 71.12 (2.800) 50 160113000016 76.20 (3.000) 50 147856000017 81.28 (3.200) 20 160114000018 86.36 (3.400) 20 160115000019 91.44 (3.600) 20 160116000020 96.52 (3.800) 20 147866000021 101.60 (4.000) 20 160117000022 106.68 (4.200) 20 160118000023 111.76 (4.400) 20 160119000024 116.84 (4.600) 20 1478760000
H.17
H
Sig
nals
& d
ata
5.08
mm
pit
ch
Socket connectors with crimp connection
BLAC BR
L1+P+2L1+P+0.079"
PL1
10
,10
.39
8"
16,20.638"
24,60.967"
Ordering dataSolder pin length
Colour of plastic orange
Pitch 5.08 mmPolesL1 mm (inch) Qty. Order No. Order No.
2 5.08 (0.200) 100 15782300003 10.16 (0.400) 100 14788600004 15.24 (0.600) 100 14789600005 20.32 (0.800) 50 14441600006 25.40 (1.000) 50 14790600007 30.48 (1.200) 50 15774300008 35.56 (1.400) 50 14791600009 40.64 (1.600) 50 1577420000
10 45.72 (1.800) 50 147926000011 55.88 (2.200) 50 157741000012 55.88 (2.200) 50 147936000013 60.96 (2.400) 50 160128000014 66.04 (2.600) 50 159417000015 71.12 (2.800) 50 160129000016 76.20 (3.000) 50 147946000017 81.28 (3.200) 20 160130000018 86.36 (3.400) 20 160131000019 91.44 (3.600) 20 160132000020 96.52 (3.800) 20 147956000021 101.60 (4.000) 20 160133000022 106.68 (4.200) 20 160134000023 111.76 (4.400) 20 160135000024 116.84 (4.600) 20 1479660000
Accessories
Possible colorsAdditional colours on request
CodingSee chapter accessories
Fixing blockSee chapter accessories
Marking stripsSee chapter accessories
Crimping toolSee chapter accessories
DFFC - crimp contact
supplied as separate contacts, tinned
Ordering data
for cable size Qty. Order No.
0.22 – 0.35 mm2 / 24 – 22 AWG 250 1604250000
0.50 – 1.00 mm2 / 20 – 17 AWG 250 1567060000
1.50 – 2.50 mm2 / 16 – 14 AWG 250 1567070000
supplied on a strip, tinned
Ordering data
for cable size Qty. Order No.
0.22 – 0.35 mm2 / 24 – 22 AWG 3000 1604230000
0.50 – 1.00 mm2 / 20 – 17 AWG 3000 1480000000
1.50 – 2.50 mm2 / 16 – 14 AWG 2500 1480100000
top related