11. processing and fabrication orientation of molecular and fibers

11. Processing and fabrication

Orientation of molecular and fibers

- Contact pressure

- Dead load

Reinforced thermoset processing

• Laminating

- Vacuum Bagging

- Elastic tape

- Shrink tape, sleeving, or fibers

- Autoclave

- Hydroclaves

- Inflatable bags

- Spray layup

- Press molding

- Silicone rubbers

- Laminated injection molding

• Filament winding

• Three dimensional reinforcement

• Prepregs

• Molding thermosets

- Compression molding

- Transfer molding

- Injection molding thermosets

• Reaction injection molding

• Casting

• Cure cycles

• Curing rate

• Curing cure

Thermoplastic processing

• Injection molding

• Extrusion

• Blow molding

1. Extrusion blow molding

2. Injection blow molding 3. Stretch blow molding

4. Blow molding materials

• Rotational molding

• Compression molding thermoplastics

• Vacuum forming

• Films

- Cast films

- Calendering

- Extrudeed flims

• Extrusion coating

• Thermoplastic foaming processing

- Polystyrene

- Polyvinyl chloride

- Engineering thermoplastic foam

Molds

Mixing equipment

• Blending and compounding

- Blenders

- Intensive mixing dispersers

- Roll mills

• Automatic mixing dispensing

• Polyester spraying

• Polyurethane foam spraying

• Polyurethane foam pouring

• Portable foam packs

• Urea formaldehyde foaming

Adhesive application