12-lba.s.c.e.40.0 75.0 70.4 lbs/yo (nominal) track feetinet ton net tons/track mile stock length...
Post on 18-Aug-2020
0 Views
Preview:
TRANSCRIPT
157/,.. •
~I'"
2·12" R~D_____ 1 %IZ";;'--.---....-
8: WEB
,
11'--.-........-2.-~~~.L-..L
12-lb A.S.C.E.
'I.. "
2 1/." ------1,..,
SPLICE BARS
16%" length 2.9 Ibs. per pair(
RAIL-Section 1240
lBS/YD (Nominal)
TRACK FEET/Nel Ton
NET TONS/Track Mile
Stock lengths 30'0"
12.0
250.0
21.1
16-lb A.S.C.E.RAIL-Section 1640LBS/YD (Nominal) 16.0
TRACK FEETlNet Ton 187.5
NET TONS/Track Mile 28.2
Stock lengths 30'0"
SPLICE BARS
16Vs" length 3.61bs, per pair
rollla~_25 -------....I
t.
1 l~, "....
2 3;.12 - RAD. 8: WEB 13'/.. "
23/." -------<1-
SPLICE BARS
16%" length 5.7Ibs. per pair
II ..
l 12" RAD.
ex WEB
20.0
150.0
35.2
Stock lengths 30'0"
SPLICE BARS
16Ye" length 4.2 Ibs. per pair
RAIL-Section 2540
LGS/YD (Nominal) 25.0
TRACK FEET /Ne! Ton 120.0
NET TONSlTrack Mile 44.0
25-lb A.S.C.E.
RAIL-Section 2040LBS/YD (Nominal)
TRACK FEET/Net Ton
NET TONSlTrack Mile
Stock lengths 30'0"
7/1«1" l'---__~_---'---t_______l.---
1- 2 ~/." ·120-lb A.S.C.E.
o_~rolllar_26 1
40.0
75.0
70.4
LBS/YO (Nominal)
TRACK FEETINet Ton
NET TONS/Track Mile
Stock length 30'0"
4O-IbA.S.C.E.
ANGLE BARS
15.2 Ibs. per pair
RAIL-Section 4040
t. 12" RAD. Ii WEB
~l
3 II," --1~
h_1
...."I_lll_"-~+----.----.-12" R
30-lbA.S.C.E.
SPLICE BARS
12.0 Ibs. per pair 20" length
\'1," -----,
1 II ",2
1j'J_ll"_
30.0
100.0
52.8
O 1 -+-------'-----r--8~J'II""\r==- 3'/2"---
......," u~ 1 'I,"----1....-.....rolDa~ _
ANGLE BARS
10.9 Ibs. per pair
SPLICE BARS
7.0 Ibs. per pair ...16Y." length
RAIL-Sectlon 3040
LBS/YO (Nominal)
TRACK FEET/Ne! Ton
NET TONS/Track Mile
Stock lengths 30'0"
t:==----.12" R
2 life·
1%~"
t t. 12" RAD. BE WE8I L--+'" %• ....,.;.__.. 81/ ........1-- ....- .217
/ ...
1 'h.
I I t= 4'/:
--J ~•.~ 2'/,," ~
60-lb A.S.C.E.SPECIFICATIONS:
RAIL-Section 6040LBS/YO (Nominal) 60.0
TRACK FEET!Net Ton SO.O
NET TONS/Track Mile 105.6
Stock lengths 33'0"
ANGLE BARS20" length 27.2 Ibs. per pair24" length 32.5 Ibs. per pair
(
.........rolDar_28_
(
~_-r- I_:=;;;;;:;;;-__2+-"I_'CI_'=J
\2" R
4 ''I," 2 1%2"
70-lb A.S.C.E.SPECIFICATIONS:
RAIL-Section 7040LBS/YO (Nominal) 69.5
TRACK FEET/Net Ton 42.9NET TONS/Track Mile 123.2
Stock lengths 33'0" and 39'0"
ANGLE BARS
24" length 40.0 Ibs. per pair
t
2 "It," -------1
rOlllar_29..-J
t. 12" RAD. &- WEB
_1/l0"_-'t"4
~/t6 "
12" R
\
5 3;'0.
1_ 3 lI/aa" -------....-185-lb A.S.C.E.
-1Z"R
2 3/ 4 "
'·li/~~·L
'S
_
O
-!- --=~==~_ 110·
.~---
t\
SPECIFICATIONS:
RAIL-Section 8540
L8S/YD (Nominal) 85.0
TRACK FEETlNet Ton 35.3NET TONS/Track Mile 149.6
Stock length 39'0"
ANGLE BARS
24" length 49.6 Ibs. per pair(Toeless and Headfree barsalso available)
___rOlftar_31---------'
.....-----2 'h,' -----...-.4
12"R.
--.1
---tl -1- ----1---1T "I.. '"h,' 1DIAM.
1111 • 7/ • - 12"R.II l &I DIAM.
"h••___ _ _ _ J__
1...._----------__5 3/1t •
105-lb CRANE RAIL
2 "/•• , 'i. BOlT HOLES - ~. _
2 '~...
SPECIFICATIONS:
No. 105 CRANE RAil
Nominal Wt.-105Ibs. per yardStock length 39'0"
JOINT BARS
34" length 51.6Ibs. per pairHex Head Bolts 7/8 " X 5" andHeavy Hex nuts-Heat Treatedand Heavy Duty Lock Washers
rOIllar_33 _
~,----- 3~16" --------~
1-.-------- 3" J
I- j
14"R.
13
/16" ~DIAM.
j---- -----
Pl16" 11
----
1
----
DIAM. 3116"
. 12"R --1-.......0+- -+-----io~-- 1" --1----, .
_t _
ir 5+1b"
135-lb CRANE RAIL
1'/,"
1Va"
SPECIFICATIONS:
No. 135 CRANE RAIL
Nominal Wt.-135Ibs. per yardStock length 39'0"
JOINT BARS
O34" length 57.8 Ibs. per pairHex Head bolts 1Vs" x 5V2 " andHeavy Hex nuts-Heat Treated
Ii•••••• ro~;;;C_k_3_~_a_S_he_r_S 1
1---------4.3" --------------1
I/."R. TO APPROX. W'R
2"
6"
71,"R.
-~l:,~ ----DIAM. DIAM.
<t.. BOLT HOLES2'/,"R.
I/l6"R. TO APPROX. 3/16 "R.
'------------------ 6" ----------------1
2%"l·------:I---+-+_ 13;31" _.--<-+---....- 111,"
t----+-+ III..'
1'/."
(
171-lb CRANE RAILSPECIFICATIONSNo. 171 CRANE RAIL
Nominal Wt.-171 Ibs. per yardStock Length 39'0"
JOINT BARS
34" length 72.1 Ibs. per pair
Hex Head bolts 1Ya" x 6" andHeavy Hex nuts-Heat Treatedand heavy duty Lock Washers
.....1IIIIIIiII rolllar_35 ----1
6"
13/."
1'/u"
lB tl R.
-l----
)112" -t---t----t--t------+--
S/l."R.'fl'fR.
~--------------6"
175-lb CRANE RAIL
(
SPECIFICATIONS:No. 175 CRANE RAIL
Nominal Wt.-175 Ibs. per yardStock Length 39'0"
JOINT BARS
34" length 69.4 Ibs. per pair
Hex Head bolts 1Ye" x 6" andHeavy Hex Nuts-Heat Treated
CRANE RAIL and JOINT BAR DRILLING
STANDARD DRILLING SPECIFICATIONS
12-162025
30-3540--45
5060
70-7580
85-9090
90-12090-120
130
1.41.51.72.84.85.1525.07.37.7
10.711.511.912.417.3219.03
SOLT OllllENSIONS In.
F'G1H~1-':: -~~ --1Ya S~ 2~
I~ 6 2~
I~ 6 2~
1020990880520300285280260178169122113'11'0lOS797~
EV. In.
E
lis%4
I%Z
Y,ZI/3Z
Average Numo Weight of Rbor Por Keg of ""Kegs Pcr Mile for "'hich ws
200 Lbs. of Track Pounds
Romar ~:tn supply nil types of holts 10
mc~t e\'ery tr:lck requirement. Stocksinclude heat-treated high str,"~[h frogbolts. heat·treated machine bolts forclane rail and crane nlll\I'a~' arplkatiolls.
Romar warehouses stock all ~iZ~$ oftra,K bolts for immediate delivery in anyquantities.
1/2" X 13/.1"1/2" x 2"1/2" X 2V2"5/8" x 2Y2"314" x 3"314" x 3'1."314" x 3W'3/4" x 4"7/8"x4"7/8" x 4V2"
I" ",'4V2"I" x 5"1" X SV2"1" x 6"jI,i x6I ~/I x611z
SPACING In. I HOLE ElOIA. In.
N A I B C 0
4 5 6 lilts 2'4 5 6 IS/IS 21
I4 5 I 6 1'11. 24 5 I 6 PlI' 24 5 6 11;\, 2
CRANERAil
SECTIO
I04·lbI05·lb135·lbJ7J·lb175·lb
Standard track uolls nrc button·heado\'tll·n~ck design, fitled with !\C]uarenuts. Bolt hp3d and neck are (orgedsteel with U. S. Standard rolledthreads. coarse. Nominal diamE'ter.specifird as holt si~e. is th~ oVE'r-nllthrrad di:llllC'tl'r. Length is m~nsurcd
(rom undE'r thE' hE'lld to the end of thebolt. Track bolt nuts are conllnonl\'nianu(uctured to the Anwrkan Standard ht'a\'Y unfinislwcI sCJunrt· design .
LOCK WASHERS or Spring Washerscan be furnished from stock in 3;4", %"or 1" sizes in heavy duty carbon steel oralloy steel.
TRACKBOLTS
All rail can be cut to lengthsand drilled to your specifications including the heaviestcrane rail sections. For anyunusual specifications contactus, we can do it!
Dl>si~ned hy ROIllar rail specialists for maximum safety andfast, efficient installation, at lowest cost. Romar Crane Stopsare welded and shaped steel plates, prcfahricated in sizes tn fitall nant' rail and "lee" rail sectiolls, and to COl1fOl!1l to standard'rane wheel diameters. They are easy to handle and install: justiii (IVcr the rail, insert tiller blocks and bolt through raii web.
Romar stocks all prefabricated components for fast.accumteassembly to your specifications, and for very prompt deliveries.To order. simply specify rail section, elevation of holes aboverltil base and diameter of crane wheels.
ROMAR CRANE STOPS
.......~rolllar_37 ____
Information Needed WhenOrdering Hook Bolts
1, Diameter of bolt needed2, Roll section that bolt Is to be used with3, Channel or beam size on
which the roll Is sitting
T
HOOK BOLTS
Romar Hook Bolts are used to fasten crane rail securely to itssupporting rtlember, They are bolted through rail web, installedin pairs with alterna ting hooks reversed, and spaced accordingto capacity of crane. Ramar can furnish hook boilS in any size,shape or length to meet each individual requirement.
Romar shops are srecially equipped for fast, top quality pro·duction of hook bolts in any quantity. Facilities providecold bending to nny shape.Bar stock is carefully specified and adequatelycarried in all diameters from 1'1" through 1W' to assure promptdeliveries.- --~'--
RAIL CLAMPSPLEASE NOTE: Drawings, tahll's and not originatecl them. weItismostimportanttocon- measurements of clips cannot hl' rf'sponsible forsuIt your Rllmar Hail D.,. shown in Ihis catalog have changps in dimf'nsions that.,artm!'nt for currf'nt spt'd. he!'n. taken (rom standard may he made. Howf'ver, allfications (or rail clips and speclfit'atlOn~.of the manu- sources arp recognized asclamps, to assur!' proper (aetun·rs. Since WI' have heing rf'liahle.installation.
o
ROl1lar Hail Clips an' availabl!' in·~ designsto conform to th£' has.'s of each of thperarlf' ri\il and "I!'p" mil st'dions, and tofast!'n t/1l'm st'curt'ly to Hit' runway gird'.·r,Th£,y ar!' usually installed in pairs 0PPO'site pach other, and spacl'd according tocapacit.y of crant'.
Clamps are designed for use with standard, heavy cr3nJsections. They are furnished in sets, consisting of a ClamPlate and Filler Plate, installed opposite each other, and spaCe
iro a ..__3_8 3c_c_o_r_d_in_g_to_c_.a_p_3_cl_'t_y_0_f_C_ra_n_e_'_I_n_t_l_rd_e_r_in_g_,_s_p_e_ci_f_y_r_a_il_s_e_c_ti-l0• • • • . and number of sets required.
CRANE RAIL CLIPS
TABLE II RAIL CLIP DIMENSIONS
CLIPNO. ICRANE RAil
SECTION--------+--
CENTERLINE RAil TO:A II
HOLEOIA.
HOLESIZE
CLIPNO.
STANDARO TEE RAilSECTIONS--------- ,----+---------,
114 1210 40-lb. ASC£ 21/32 ' Dia.120 2510 50-lb. ASCE &ARA Ilil,' Dia.103 55 to IOO-lb. ASCE Ilil, "x 2V31"
106 60 to IOO-lb. ASCE Ilil, "x 25/32 '
128 60 to IOO-lb. ARA-B jilt,' x 15/l1 '
62 lIS, 131 and 132-lb. AREA II/IS' Di•.62 130-!b. PS Pils' Oia.
Bolt holn standard as shown, but may be chanKed lor special reQu;remenh.
rollla~_39 ___II
(
SINGLE CLAMP AND HOLDER No. K·107These heavy fasteners are used to anchor crane rails tosupporting beams. The holder is usually welded to supporting member, but can be bolted when specified. Furnished complete with bolts and lock washers.
Rail Clips with Eccentric Fillers
I I II--$- -$- lQ %:W t;!l: z
Single Clip w w(One FiII.r Per Clip)
c.> .j
b ""C J 2 0
-$--.
~I/'l
Doubl. Clip (One Fill.r Per Clip)
i -:::Y IJ:::::::-I--~'-.r"
t t lJ..,.11--1}1~:Jb;r_RAIL BASE WIDTH~I:-I~:'" L1t2o':2~'30·AS
II ,1 BOLT GAGE ii "I--_..J!._.. _.__.- !"-4o" TO IOO·AS INCL.
Note:13/16' Diameter Holes are standord.
RaM I lolt I Sln,l. Doubl.EtGO'. Clip No. Clip No.
2O'AS 5'1,' 201 202
25#AS 5\14' 251 252_.._--30#AS 5%' 301 302
"O#AS 6' "01 402
60#AS 6¥. • 601 602
70#AS 7V,' 701 702
75#AS 7Y,"' 751 752
PIJ#AS I 7'12 ' PlJI 802
85#AS 7"111' I 851 852
9O#AS 7~I' I 901 902
IOO#AS 8\14' I 1001 1002
(
Clips with eccentric fillers are used where small gage adjustmentsare required. Through positioning of the eccentric fillers, the adjustment range is 3/16 in.
Both single clips (with one eccentric filler per clip) and doubleclips (with one filler per clip) are available for rail weight.s of 20 to100 lb.
Single Eccentric Filler
For conditions not listed,please specify:A. Roil welghl and seclion.B. Bolt gage.C. 8011 cenlers for doubl. clip.-D. Bolt size Idlomalorl or hole size.E. length or clip.F. If worn roll: width, thickne.. and
'ope r 01 roil bose..........rolftar_40---I
R·201R·202
singledouble
Pressed Clip and Reversible Filler, Tight FitI
1V,," HOLESFOR 1" BOLTS
I'll"
1YI." HOLESFOR 1" BOLTS,I
~.If:1--t---+--+--+--+-
ITl'h"
+i-+---+-6"
'h"
3"
1%"
1----+ 2'h" --...l
OOU8LE CLIP
\,\I\\I
...'
------1-----------
,,,,
BASE -----
",.----_.- --- --- ..,,,t,,,,'.. ......... ,
\\,IIIIIIIII,,,,,
.~
SINGLE CLIPS AND FILLERSARE HALF LENGTH --
-I' VB" - -·1 511J"
REVERSIBLE FILLER
3"
-l--f--L.-...-+--+----i-:~
6"
T
'f.-·21h" -+-----1
---------- GAGE --_.
Rail Sec. Base Width Gage ¢ to ¢ holes Filler ThicknessT
Est. Wt. Clip
Single Double
Est. Wt. Filler
Single Double
104·CR135·CR171-eR175-CR
5 in.53f,e in.6 in.6 in.
7~ in.a in.a~ in.8~ in.
Y2 in.Y2 in.%in.Y2 in.
1.61b 3.21b1.61b 3.21b1.61b 3.21b1.61b 3.21b
1.051b 2.11b1.051b 2.1 Ib1.3 Ib 2.81b1.051b 2.11b
NOTE: Cloar3ncel L Ilell) and R (right) een be ~lIied bV leverslnglhe /iller.
rGlllar_41--------'
R·301 singleR·302 double
Pressed Clip and Reversible Filler, Loose Fit
6"
3"
.. '!~
ill 1 y,." HOlES ~[' FOR '" BOl.TS '!h" II':!. -t--t----f--+---1f-
1Y2"
....... -""'--__D_O_U+8L_E_C_L1_P---J-l
1VI''' HOLES
FOR I" 80LTS
REVERSIBLE FILLER
~I'·'''T'~'''~,
tI;
SINGlE CLIPS AND FILLERS !!~3" ----- - - - -- - -....--- ARE HALF LENGTH --~+ - --- -:,I!,1- - _. - - - - --
,------ ------ -- ..., '\, \I ,I,,
II\-. ~, ~,~p
" '\ '\ I, I, II II II II II II I, II II ,
• 1
,
} \ aEND IN 1'/4" !I \,~ -L
..- ..~' ~ ~ '-'2"- 'I." c_ "
r--L---t-~--+--"'-,-':...... -.,. - T: 'Y4" •~__~_~~__~, j '!/~__~~---L--~
+---~ L1_ BASE ----------j Rt----t- 2'12" ---l
1'12"
1'12"
GAGE
Gage ¢ to ¢ holes Filler Thickness Est. Wt. Clip Est, Wt. FillerRail Sec. Base Width T Single Double Single Double
104-CR 5 in. 7:X in. %in. 1.61b 3.21b 1.31b 2.61b135-CR 53/'8 in. a in. 6~ in. 1.61b 3.21b 1.31b 2.61b171-CR 6 in. a:x in. :x in. 1.61b 3.21b 1.61b 3.21b175-CR 6 in. a:x in. %in. 1.61b 3.21b 1.31b 2.61b
6"
NOTE: Clea"nees L (IeIn and R (right) can be varied by reversing the liller.
o I
........-....-.....rolDar_42- 1
top related