2012 gyford standoff systems catalog

STANDOFFS • WIRE SUSPENSION • EZ-ROD & WIRE • STRUCTURELITE • HARDWARE

SEPTEMBER 6, 2012 | Volume 2, Issue 4

GYFORD STANDOFF SYSTEMS®STANDOFFS CATALOG

contents | indexStan

9 9 9 11 11 11

21 23 23

Round Caps . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Square/Hex Caps & Barrels . . . . . . . . . . . . .7

Low Profile Caps . . . . . . . . . . . . . . . . . . . . . .9

Security Caps . . . . . . . . . . . . . . . . . . . . . . . . 11

Barrels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Hubs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Link & Travelers . . . . . . . . . . . . . . . . . . . . . 17

Grippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Edge Grips . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Fixed Hinges . . . . . . . . . . . . . . . . . . . . . . . .23

Panel Clips & Adjustable Edge Grips . . . .25

Stainless Steel Caps & Barrels . . . . . . . . .27

INDEX BY PART # . . . . . . . . . . . . . . . . . . . . .28

StandOffsContents

Stainless SteelStainless Steel

25 25 27 27 27

Stainless Steel

5 5 7 7 7 9

13 15 17 17 17 19

19 21 21 21 21 21

Create a big impact using 1/4" Cap and Barrel . Use Edge Grips for your next sign .

StandOffs mount horizontally, vertically, or as needed .

StandOffs

DEMO1 * Rendering of display. Actual may vary.

StandOffs Demo Modelcall for pricing and availability

Parts include everything shown unless otherwise noted.

contents | index

Using different colors

and layers will add

depth to your display .StandOff Caps can also be used on

slatwall with the use of a slatwall nut .

Use clear vinyl washers and plastic

tubing to protect material .

Screw cap onto appropriate mounting

hardware for your application . See the

Hardware section for a variety

of attachment options .

How To: Round Caps

Accent your interiors with StandOff Caps and Barrels .

* Female caps come with your choice of stud lengths up to 1-1/2" . Longer studs available at additional cost .

RoundCaps

Part Diameter Thread Size Cap Height Type Cap Included

SO-CAP25 1/4" 6-32 5/32" A Hardware Sold Separately

SO-CAP7 3/8" 10-24 1/4" A Sold with stud up to 1-1/2"

SO-CAP8 5/8" 5/16-18 5/16" A Sold with stud up to 1-1/2"

SO-CAP75 3/4" 5/16-18 5/16" A Sold with stud up to 1-1/2"

SO-CAP9 1" 5/16-18 3/8" A Sold with stud up to 1-1/2"

SO-CAP9CU 1" 1/4-20 3/8" A Sold with stud up to 1-1/2"

SO-ACAP2 1-1/4" 5/16-18 3/8" B Low Head and Brushed Disc

SO-CAP3 1-1/4" 5/16-18 1/2" A Sold with stud up to 1-1/2"

SO-CAP10 1-1/2" 5/16-18 1/2" A Sold with stud up to 1-1/2"

SO-CAP22 2" 5/16-18 5/8" A Sold with stud up to 1-1/2"

A: Standard Cap

With Removable Stud

B: Low Head Attachment

and Brushed Aluminum Disc

The Aluminum Round

Caps are available in

a variety of diameters .

contents | index Square/HexCaps&Barrels

SO-CAP20

Part Cap Height Stud Length

SO-CAP20 3/8" Specify *

1"WideSquareCap(Specify panel thickness when ordering)

5/16-18 thread3/8"

SO-HCAP1

SO-HCAP1 3/8" Specify *

1"WideHexCap(Specify panel thickness when ordering)

5/16-18 thread

SO-HCAP2 3/8" Specify *

1-1/4"WideHexCap(Specify panel thickness when ordering)

5/16-18 thread

SO-HCAP2

1-1/4"

* Female caps come with your choice of stud lengths up to 1 1/2" . Longer studs available at additional cost .

Layering StandOffs creates a unique perspective .

Hex Caps are a nice option for an industrial appearance .

Screw the proper length stud into the

cap and tighten with a Hex wrench .

Insert the cap through the image

and square-up with the barrel . Tighten

the socket set screw supplied

with square barrels .

Barrel length

5/16" x 1/2" Deep Counterbore

10-24 Nylon Tipset screw

5/16-18Thread

SO-ASQ1 & 2

1"WideSquareBarrelsPart Length Tapped

SO-ASQ1 1" 1/2" one endSO-ASQ2 2" 1" one end

How To:Geometric Caps

contents | index LowProfileCaps

Apply pressure to top of cap with neoprene

wrench and turn .

HD-NW HD-AD2

Typical

5/16-18Thread

*Femalecapscomewithyourchoiceofstudlengthsupto1-1/2".Longerstudsavailableatadditionalcost.

Combine with StructureLite for fabulous furniture .

Can be used to create transaction tops .

How To:Low Profile Caps

Press and turn the neoprene

wrench HD-NW, to tighten caps .

For 1" dia . and larger

Low Profile Caps .

Low Profile Cap

Clear plastic tubing: 1/2" ID x 5/8" OD

Hole size 11/16" Dia .

Plex, glass, wood, etc .

Vinyl washer

5/16-18 threaded

Barrel

Use the Hex tool (HD-AD2),

or Wrench (HD-AW2) for

SO-CAP17, SO-CAP18, & SO-CAP19 .

Low Profile Caps lend a sleek

appearance to wall mounted pieces .

Part Diameter Thread Size Cap Height Stud Length

SO-CAP17 3/8" 10-24 1/8" 1/2" Fixed

SO-CAP18 5/8" 5/16-18 1/8" 1/4" Fixed

SO-CAP19 5/8" 5/16-18 1/8" 5/8" Fixed

ONEPIECECAPSWITHFIXEDSTUD

Part Diameter Thread Size Cap Height Stud Length Included

SO-CAP11 1" 5/16-18 1/8" Specify Sold with stud up to 1-1/2"

SO-CAP12 1-1/4" 5/16-18 1/8" Specify Sold with stud up to 1-1/2"

SO-CAP23 2" 5/16-18 1/8" Specify Sold with stud up to 1-1/2"

CAPWITHSTEMANDREMOVABLESTUD

TOOLS FOR LOW PROFILE CAPS

HD-NW For caps 11, 12, 13, 14 & 23

HD-AD2 3/32" Hex Tool for Caps 17, 18 & 19

HD-AW2 3/32" Allen Wrench for Caps 17 & 18

Minimum material thickness for the shoulder of these caps is 1/4" . Specify panel thickness when ordering .

HD-AW2

contents | index SecurityCaps

SO-SC95/16"

SO-SC105/16"

1-1/2"

SO-SC35/16"

1-1/4"

SecurityCaps

Part Diameter

SO-SC9 1"SO-SC3 1-1/4"

SO-SC10 1-1/2"

5/16-18 threadx 1/4" deep

3/32" x 1/4" deep

How To:Security Caps

Security Caps replace standard caps on

this football trophy case to protect the display .

Security Caps can provide

added security when needed .

An HD-SCT is used to tighten

Security Caps to prevent

unwanted cap removal .

Note: Set screw not required.SecurityCapTool

HD-SCT Fits side hole to tighten capHD-SCT

See HD-AW4 tool for tightening

SecurityCap

Part Fits MaterialsSO-SCB 1/4" ThickSO-SCB1 3/8" ThickSO-SCB2 1/2" Thick

5/16-18thread

31/32"

5/32" hex key

SO-SCB

5/16-18thread

27/32"

5/32" hex key

SO-SCB1

5/16-18thread

23/32"

5/32" hex key

SO-SCB2

Note: For Glass or Plastic applications vinyl washers and plastic tube are used to prevent material damage . See Hardware pg. 176/177

HD-PT3 7/16" O .D .

ffscontents | index Barrels

Custom barrel lengths up to 24" are available .

How To:Barrels

You can use barrels on slatwall too .

See Hardware catalog for options.

To line-up the Square Cap & Barrel,

tighten the set screw while

holding the cap in place .

StandOff components can be mounted to

any wall type (wood, drywall, concrete,

etc .) with the appropriate hardware .

See Hardware catalog for options.

Barrels are available in many lengths, shapes

and diameters . See the StructureLite section

for 2-1/2" diameter barrels made

from SL-2 .5BAR or SL-2 .5TUBE .

Lock the cap stud into the barrel by tightening

the Nylon Tip set screw with a 3/32 Hex Key .

Part Diameter Length Thread Size Threading

SO-2525 1/4" 3/16" 6-32 Drilled Thru - No Thread

SO-025 3/8" 1/4" 10-24 Drilled Thru - No Thread

SO-050 3/8" 1/2" 10-24 Tapped Thru

SO-010 3/8" 1" 10-24 1/2" Both Ends

EZ-SP1 5/8" 3/16" 5/16-18 Drilled Thru - No Thread

SO-500 5/8" 1/2" 5/16-18 Tapped Thru

SO-750 5/8" 3/4" 5/16-18 Tapped Thru

SO-100 5/8" 1" 5/16-18 Tapped Thru

SO-150 5/8" 1-1/2" 5/16-18 Tapped Thru

SO-200 5/8" 2" 5/16-18 1" Both Ends

SO-300 5/8" 3" 5/16-18 1" Both Ends

SO-BAR5 5/8" 5-3/4" 5/16-18 1" Both Ends

SO-BAR9 5/8" 9-3/4" 5/16-18 1" Both Ends

SO-BAR11 5/8" 11-3/4" 5/16-18 1" Both Ends

SO-75075 3/4" 3/4" 5/16-18 Tapped Thru

SO-75100 3/4" 1" 5/16-18 Tapped Thru

SO-75125 3/4" 1-1/4" 5/16-18 Tapped Thru

SO-9025 1" 1/4" 5/16-18 Tapped Thru

SO-9050 1" 1/2" 5/16-18 Tapped Thru

SO-9100 1" 1" 5/16-18 Tapped Thru

SO-9100CU 1" 1" 1/4-20 Tapped Thru

SO-9150 1" 1-1/2" 5/16-18 Tapped Thru

SO-9200 1" 2" 5/16-18 1" Both Ends

SO-9300 1" 3" 5/16-18 1" Both Ends

SO-9400 1" 4" 5/16-18 1" Both Ends

SO-9600 1" 6" 5/16-18 1" Both Ends

SO-250 1-1/4" 1/4" 5/16-18 Tapped Thru

SO-625 1-1/4" 5/8" 5/16-18 Tapped Thru

SO-1 1-1/4" 1" 5/16-18 Tapped Thru

SO-115 1-1/4" 1-1/2" 5/16-18 Tapped Thru

SO-2 1-1/4" 2" 5/16-18 1" Both Ends

SO-3 1-1/4" 3" 5/16-18 1" Both Ends

SO-4 1-1/4" 4" 5/16-18 1" Both Ends

SO-6 1-1/4" 6" 5/16-18 1" Both Ends

SO-8 1-1/4" 8" 5/16-18 1" Both Ends

SO-10 1-1/4" 10" 5/16-18 1" Both Ends

SO-12 1-1/4" 12" 5/16-18 1" Both Ends

SO-1525 1-1/2" 1/4" 5/16-18 Tapped Thru

SO-1505 1-1/2" 1/2" 5/16-18 Tapped Thru

SO-151 1-1/2" 1" 5/16-18 Tapped Thru

SO-152 1-1/2" 2" 5/16-18 1" Both Ends

SO-153 1-1/2" 3" 5/16-18 1" Both Ends

SO-154 1-1/2" 4" 5/16-18 1" Both Ends

SO-201 2" 1" 5/16-18 Tapped Thru

SO-202 2" 2" 5/16-18 1" Both Ends

SO-203 2" 3" 5/16-18 1" Both Ends

SO-204 2" 4" 5/16-18 1" Both Ends

SO-206 2" 6" 5/16-18 1" Both Ends

1/4" dia.

The 5/8"diameter barrels are

available in a variety of lengths

from 3/16" to 11-3/4" .

The 1"diameter barrels compared

with a 3/8"diameter barrel .

A 1–1/2"diameter

barrel, 1/2" long .

contents | index

Customlengthsavailable

SO-A14H-125

SO-A14H-250

SO-A14H-375

SO-A14H-500

1-1/4"Diameter4-WayHubs5/16" thru hole

Part Thickness Set Screw

SO-A14H-125 1/8" NoSO-A14H-250 1/4" YesSO-A14H-375 3/8" YesSO-A14H-500 1/2" YesSL-4WH1 Custom Lengths

5/16" thru hole

Thickness

10-24Nylon Tip set Screw

SO-A24H-500

SO-A24H-375

SO-A24H-250

SO-A24H-1251-1/2"Diameter4-WayHubs

5/16" thru hole

Part Thickness Set Screw

SO-A24H-125 1/8" NoSO-A24H-250 1/4" YesSO-A24H-375 3/8" YesSO-A24H-500 1/2" YesSL-4WH2 Custom Lengths

Thickness 9/16"

5/16" thru hole

10-24Nylon Tip set Screw

Custom 4-way extrusions lengths

create even more unique designs .

Threaded rod is used to join additional

hardware items to 4-way extrusions .

Screw the threaded rod into place and

way extrusion over the rod .

Set your panel into the notch of

the 4-way and screw on the Cap to

hold everything in place .

Use standard Hubs with Caps & Barrels

to create grid displays .

How To: Hubs Shelf Support

contents | index Link&Travelers

Create a rotating display with hinges

and links attached to travelers .

The Link, Traveler and Fixed Hinge

used in the panel display shown .

How To:Links & Travelers

The assembly is complete, ready for

panel or other attachment .

Square or round travelers create a one-of-a-kind display .

The SO-TRAV is attached to the rod

and an SO-LINKL is attached to it .

HingeLinksExtends 1-1/4" fixed Hinge sets to make 2-way and 4-way panel connections

or a 90° internal corner

Part ApplicationSO-LINKL Low Head Counterbore

SO-LINKL

Low HeadCounterbore

10-24tapped(only use with 1-1/4" hinge)

Traveler Link

Note: This application photo shows some parts not included when ordering Links & Travelers

StandOffTravelersUsed to attach other components

to 5/8” diameter rod

Part ElementSO-TRAV Round Traveler SO-ST Square Traveler

1-1/4"

5/16-18Threads

SO-TRAV

5/16-18Thread

TypicalLink&TravelerApplications

All StandO ff Travelers are avai lable in CLEAR anodize only.

contents | index Grippers

Note: Specify the surface that the Gripper will be mounted to, and what panel material will be used .

CupPointsetscrewand5/16-18fastenerincluded.NylonTipsetscrewoptionalforglass,andothermaterials.

SO-AGR-250

1-3/16"

2-1/8"

1/4"Gripper(Specify material & application)

Includes 5/16-18 x 3/4" Stud

Part Holds

SO-AGR-250 1/4"

SO-AGR-375

1-3/16"

2-1/16"

3/8"Gripper(Specify material & application)

Includes 5/16-18 x 1/2" Low Head

Part Holds

SO-AGR-375 3/8"

SO-AGR-500

1-5/16"

2-3/8"

1/2"Gripper(Specify material & application)Includes 5/16-18 x 1/2" Low Head

Part Holds

SO-AGR-500 1/2"

GripperAssemblies(Specify material & application)

Includes Low Head & (3) Mounting ScrewsWall plate is 2-1/4" diameter x 1/4" thick

Part Holds

SO-AGR-250WMBL 1/4"SO-AGR-375WMBT 3/8"SO-AGR-500WMBT 1/2"SO-AGR-750WMBT 3/4"

SO-AGR-250 Thru 750WMBT

SO-AGR-750

3/4"Gripper(Specify material & application) Includes 5/16-18 x 1/2" Low Head

Part Holds

SO-AGR-750 3/4"

How To: Grippers

Or, mount the Gripper to

a surface then slide panel

into the opening of the

Gripper and tighten set

screw until snug .

Place a panel in the opening

of the Gripper . Hold the panel

in place while tightening

the set screw .

Attach the desired part using

a low head socket cap screw

or threaded stud .

Use for suspending . . .

or horizontal applications .

vertical . . .

25/32"

1-15/16"

3-11/64"

5/16-18

Cup Point

set screw

(typical)

contents | index EdgeGrips

1-1/4"DiameterAdjustableEdgeGrips

Includes Adjustment Screw, Low Head and Disc & Cap for mounting

Part Holds Overall Height

SO-AEGCR 1/4"-1/2" 1-1/4"-1-1/2"

SO-AEGSC16 1/4"-1/2" 1-1/4"-1-1/2"

SO-DISC 1

1/4" - 1/2"

StandOffReceiver

Edge Grip Disc Cap

SO-AEGCR SO-AEGSC16

SO-CAP 16

1/4" - 1/2"

Edge Grip Screw Cap

StandOffReceiver

Disc&Capforusewith1-1/4"dia.EdgeGrips

Part Threading

SO-DISC1 None (self-adhesive)SO-CAP16 5/16-18SO-DISC1

SO-CAP16

1/16"1/4"

1-1/4"

Brushed Aluminum

1"DiameterEdgeGripsw/Disc Includes Set Screw, Low Head,

and Disc for mountingPart Holds Overall Height

SO-AEGC-125 1/8" 1-1/16"

SO-AEGC-250 1/4" 1-1/16"

SO-AEGC-375 3/8" 1-1/16"

SO-AEGC-500 1/2" 1-1/16"

21/32"

SO-AEGC-125

17/32"

SO-AEGC-250

13/32"

SO-AEGC-375

13/32"

SO-AEGC-500

10-24Nylon Tipset screw

5/16-18x1/2" Low Head

17/32"

1"DiameterEdgeGripswithThreadedCaps

Includes Set Screw, Low Head, and cap for mounting

Part Holds Overall Height

SO-AEGTC125-15 1/8" 1-1/16"

SO-AEGTC250-15 1/4" 1-1/16"

SO-AEGTC375-15 3/8" 1-1/16"

SO-AEGTC500-15 1/2" 1-1/16"

SO-AEGTC500-15

17/32"

13/32"

SO-CAP 15

10-24Nylon Tipset screw

5/16 x18 x1/2" Low Head

SO-AEGTC375-15

17/32"

SO-AEGTC 250-15

3/16"5/32"

21/32"

SO-AEGTC 125-15

Disc&Capforusewith1"dia.EdgeGrips

Part Threading

SO-DISC2 None (self-adhesive)SO-CAP15 1/2-20

SO-CAP15

SO-DISC2

Brushed Aluminum

1/32"1/16"

Edge Grips allow a firm hold

without drilling holes in

your display or artwork .

How To:Edge Grips

A Nylon Tip set screw is tightened to

secure material in the Edge Grip .

A Low Head screw is used to attach

an Edge Grip to a mounted Barrel .

A completed Edge Grip installation .

The threaded cap or disc is installed

to finish the Edge Grip assembly .

SO-DISC 2

contents | index FixedHinges

NOTE: Hinges lock into place and are not meant to be moving parts .

SO-AEGHD

SO-AEGH16

1-1/4"FixedHinge&AdjustableEdgeGrip

For Edge Grip specs, see page 21 .

Part Diameter Holds

SO-AEGHD 1-1/4" 1/4"-1/2"SO-AEGH16 1-1/4" 1/4"-1/2"

Note: To increase the amount of available hinge travel see Links on page 17

60°Min

SO-A1H-CAP9

1"FixedHinge&Cap(Specify panel thickness when ordering)

Part Diameter Cap Height

SO-A1H-CAP9 1" 3/8"

SO-A1H

1"FixedHinge5/16-18 tapped holes .

Part Diameter Thickness

SO-A1H 1" 5/16"

13/16" 13/16"

1-11/16"

SO-A125H

1-5/16" 1-5/16"

2-5/8"

1-1/4"

1-1/4"FixedHinge5/16-18 tapped holes .

Part Diameter Thickness

SO-A125H 1-1/4" 3/8"

SO-A125H-CAP1 Thru CAP3

60°Min

1-1/4"FixedHinge&CapFor Cap specs, see page 5 .

(Specify panel thickness when ordering)

Part Diameter Cap Height

SO-A125H-CAP1 1-1/4" 1/2"SO-A125H-CAP2 1-1/4" 3/8"SO-A125H-CAP3 1-1/4" 1/2"

SO-A1H-EGTC125-15

Thru EGTC500-15

1"FixedHinges&EdgeGripw/ThreadedCap

(Specify panel thickness when ordering)Part Diameter Holds

SO-A1H-EGTC125-15 1" 1/8" SO-A1H-EGTC250-15 1" 1/4"SO-A1H-EGTC375-15 1" 3/8"SO-A1H-EGTC500-15 1" 1/2"

60°Min

SO-CAP15

SO-A1H-EGC-125

Thru EGC-500

1"FixedHinge&EdgeGripw/DiscCap

(Specify panel thickness when ordering)Part Diameter Holds

SO-A1H-EGC-125 1" 1/8" SO-A1H-EGC-250 1" 1/4"SO-A1H-EGC-375 1" 3/8"SO-A1H-EGC-500 1" 1/2"

60°Min

SO-DISC2

SO-DISC 1

SO-CAP 16

How To:StandOffs with

Plexiglass & Glass

Measure and mark the hole centerline .

Carefully drill a hole using a plex bit .

When using glass, add plastic tubing and clear washers to protect your

material between the cap and hinge .

Join the two hinge parts together, set at desired angle,

and tighten the lowhead socket cap screw .

Hinges can be used in

a variety of configurations .

The addition of a Link (pg 17),

allows Fixed Hinges to turn

to the inside at 90˚ .

StandOff Hinges make attractive accents .

Imagine the possibilities!

8-32 tapped

10-24 tapped

contents | index

Flush-MountPANELCLIPSIncludes: Panel Clip, Cap Disc,

#8 Mounting Screw, Anchor and 2 Shims

Part Diameter Holds

SO-APC-100 1" 1/8", 3/16" & 1/4"SO-APC-125 1-1/4" 1/8”, 3/16” & 1/4”

SO-APC-1001"

SO-APC-1251-1/4"

ADJUSTABLEPANELEDGEGRIPSIncludes Set Screws as shown

Part Diameter Holds

SO-APEG9 1" 1/8" to 1/2"SO-APEG3 1-1/4" 1/8" to 3/4"

SO-APEG3

SO-APEG9

PanelClips&AdjustableEdgeGrips

How To:Panel Clips

How To:Panel Edge Grips

Position the Cap on the panel, tighten the cap set screw . Slide the Barrels on

the Cap but don’t tighten it’s set screw .

Stick masking tape on the wall where the Barrel will be mounted and mark their positions . Establish the center-point, drill the mounting hole and remove the tape .

Mount the Barrels to the wall surface, slide the Caps

into the Barrels and now tighten the set screws to

complete your installation .

Locate lower Panel Clip mounting positions and attach as above but do not tighten . Choose the proper shim, if required, and set the panel in place . Attach upper Panel Clips and tighten all then insert the brush-finished Disc to complete the installation .

Panel Clips can flush-mount mirrors,

graphics and architectural panels

without drilling holes in the panels .

Adjustable Panel Edge Grips accept different panel thickness for

circular or four-sided mountings . No panel holes required .

10-24 Cup Point Set Screw

1-1/4"

10-24 Nylon Tip Set Screw

Length Range:

Min= 1-9/16" Max= 1-15/16"

10-24 Cup Point Set Screw

1-1/2"

1-1/4"

10-24 Nylon Tip Set Screw

Length Range:

Min= 1-13/16" Max= 2-7/16"

contents | index StainlessSteelCaps&Barrels

Barrel L

Diameter

#316STAINLESSSTEELBARRELS

SO-SSCAP9

5/16-18 Thread

How To:Stainless SteelBarrels & Caps

This solid surface wall uses combination screws setinto pre-drilled holes . Other mounting surfaces may

require different fasteners from our Hardware Catalog .

A stainless steel Barrel is attached to the stud .

The proper length hex socket set screw is tightened into the stainless steel cap .

A pre-drilled panel is positioned and caps tightened with a Security Cap Tool

A variety of different barrel diameters and lengths are

available in stainless steel to add new design possibilities .

SO-SSCAP4 3/16"

1-1/4"

5/16-18 Thread

SO-SSCAP3 3/16"

5/16-18 Thread7/16"

SO-SSCAP2R 3/16"

1/4-20 Thread5/16"

SO-SSCAP1R

10-24 Thread

Security Cap Tool See SO-Page 11

HD-SCT

STAINLESSSTEELROUNDCAP(Specify panel thickness when ordering)

Part Diameter Stud Length Material

SO-SSCAP9 1" Specify* #316

* Female caps come with your choice of stud lengths up to 1-1/2" . Longer studs available at additional cost .

#316STAINLESSSTEELCAPS(Specify panel thickness when ordering)

Part Diameter Stud Length

SO-SSCAP1R 1/2" Specify*SO-SSCAP2R 3/4" Specify*SO-SSCAP3 1" Specify*SO-SSCAP4 1-1/4" Specify*

HD-SCT 3/32" Security Cap Tool

HD-SCTtoolrequired to tighten caps .

Note: SO-SSCAP1R has 1 side hole and all others have 2 side holes .

Part Diameter Length Thread Size Threading

SO-SS1500 1/2" 1/2" 10-24 Tapped Thru

SO-SS1750 1/2" 3/4" 10-24 Tapped Thru

SO-SS2500 3/4" 1/2" 1/4-20 Tapped Thru

SO-SS2750 3/4" 3/4" 1/4-20 Tapped Thru

SO-SS2100 3/4" 1" 1/4-20 Tapped Thru

SO-SS3750 1" 3/4" 5/16-18 Tapped Thru

SO-SS3100 1" 1" 5/16-18 Tapped Thru

SO-SS4100 1-1/4" 1" 5/16-18 Tapped Thru

SO-SS4150 1-1/4" 1-1/2" 5/16-18 3/4" Both Ends

#316 Stainless Steel Barrels fitted with Security Caps are

excellent for use in exterior applications as well as food

service, hospitality, medical, and other sensitive environments .

StandOffsIndexbyPart#

EZ-SP1 . . . . . . . . . . . . . . . . . . . . .13

HD-AD2 . . . . . . . . . . . . . . . . . . . . . 9

HD-AW2 . . . . . . . . . . . . . . . . . . . . . 9

HD-NW. . . . . . . . . . . . . . . . . . . . . . 9

HD-SCT . . . . . . . . . . . . . . 11&27

SL-4WH1 . . . . . . . . . . . . . . . . . . .15

SL-4WH2 . . . . . . . . . . . . . . . . . . .15

SO-010 . . . . . . . . . . . . . . . . . . . . .13

SO-025 . . . . . . . . . . . . . . . . . . . . .13

SO-050 . . . . . . . . . . . . . . . . . . . . .13

SO-1 . . . . . . . . . . . . . . . . . . . . . . .13

SO-2 . . . . . . . . . . . . . . . . . . . . . . .13

SO-3 . . . . . . . . . . . . . . . . . . . . . . .13

SO-4 . . . . . . . . . . . . . . . . . . . . . . .13

SO-6 . . . . . . . . . . . . . . . . . . . . . . .13

SO-8 . . . . . . . . . . . . . . . . . . . . . . .13

SO-10. . . . . . . . . . . . . . . . . . . . . .13

SO-12. . . . . . . . . . . . . . . . . . . . . .13

SO-100 . . . . . . . . . . . . . . . . . . . . .13

SO-115 . . . . . . . . . . . . . . . . . . . . .13

SO-150 . . . . . . . . . . . . . . . . . . . . .13

SO-151 . . . . . . . . . . . . . . . . . . . . .13

SO-152 . . . . . . . . . . . . . . . . . . . . .13

SO-153 . . . . . . . . . . . . . . . . . . . . .13

SO-154 . . . . . . . . . . . . . . . . . . . . .13

SO-200 . . . . . . . . . . . . . . . . . . . . .13

SO-201 . . . . . . . . . . . . . . . . . . . . .13

SO-202 . . . . . . . . . . . . . . . . . . . . .13

SO-203 . . . . . . . . . . . . . . . . . . . . .13

SO-204 . . . . . . . . . . . . . . . . . . . . .13

SO-206 . . . . . . . . . . . . . . . . . . . . .13

SO-250 . . . . . . . . . . . . . . . . . . . . .13

SO-300 . . . . . . . . . . . . . . . . . . . . .13

SO-500 . . . . . . . . . . . . . . . . . . . . .13

SO-625 . . . . . . . . . . . . . . . . . . . . .13

SO-750 . . . . . . . . . . . . . . . . . . . . .13

SO-1505. . . . . . . . . . . . . . . . . . . .13

SO-1525. . . . . . . . . . . . . . . . . . . .13

SO-1875. . . . . . . . . . . . . . . . . . . .13

SO-2525. . . . . . . . . . . . . . . . . . . .13

SO-9025. . . . . . . . . . . . . . . . . . . .13

SO-9050. . . . . . . . . . . . . . . . . . . .13

SO-9100. . . . . . . . . . . . . . . . . . . .13

SO-9100CU. . . . . . . . . . . . . . . . .13

SO-9150. . . . . . . . . . . . . . . . . . . .13

SO-9200. . . . . . . . . . . . . . . . . . . .13

SO-9300. . . . . . . . . . . . . . . . . . . .13

SO-9400. . . . . . . . . . . . . . . . . . . .13

SO-9600. . . . . . . . . . . . . . . . . . . .13

SO-75075. . . . . . . . . . . . . . . . . .13

SO-75100. . . . . . . . . . . . . . . . . .13

SO-75125. . . . . . . . . . . . . . . . . .13

SO-A125H . . . . . . . . . . . . . . . . . .23

SO-A125H-CAP1 . . . . . . . . . . . .23

SO-A125H-CAP2 . . . . . . . . . . . .23

SO-A125H-CAP3 . . . . . . . . . . . .23

SO-A14H-125. . . . . . . . . . . . . . .15

SO-A14H-250. . . . . . . . . . . . . . .15

SO-A14H-375. . . . . . . . . . . . . . .15

SO-A14H-500. . . . . . . . . . . . . . .15

SO-A1H. . . . . . . . . . . . . . . . . . . .23

SO-A1H-CAP9. . . . . . . . . . . . . . .23

SO-A1H-EGC-125 . . . . . . . . . . .23

SO-A1H-EGC-250 . . . . . . . . . . .23

SO-A1H-EGC-375 . . . . . . . . . . .23

SO-A1H-EGC-500 . . . . . . . . . . .23

SO-A1H-EGTC125-15. . . . . . . .23

SO-A1H-EGTC250-15. . . . . . . .23

SO-A1H-EGTC375-15. . . . . . . .23

SO-A1H-EGTC500-15. . . . . . . .23

SO-A24H-125. . . . . . . . . . . . . . .15

SO-A24H-250. . . . . . . . . . . . . . .15

SO-A24H-375. . . . . . . . . . . . . . .15

SO-A24H-500. . . . . . . . . . . . . . .15

SO-ACAP2 . . . . . . . . . . . . . . . . . . . 5

SO-AEGC-125 . . . . . . . . . . . . . . .21

SO-AEGC-250 . . . . . . . . . . . . . . .21

SO-AEGC-375 . . . . . . . . . . . . . . .21

SO-AEGC-500 . . . . . . . . . . . . . . .21

SO-AEGCR . . . . . . . . . . . . . . . . . .21

SO-AEGH16. . . . . . . . . . . . . . . . .23

SO-AEGHD. . . . . . . . . . . . . . . . . .23

SO-AEGSC16. . . . . . . . . . . . . . . .21

SO-AEGTC125-15 . . . . . . . . . . .21

SO-AEGTC250-15 . . . . . . . . . . .21

SO-AEGTC375-15 . . . . . . . . . . .21

SO-AEGTC500-15 . . . . . . . . . . .21

SO-AGR-250 . . . . . . . . . . . . . . . .19

SO-AGR-375 . . . . . . . . . . . . . . . .19

SO-AGR-500 . . . . . . . . . . . . . . . .19

SO-AGR-750 . . . . . . . . . . . . . . . .19

SO-AGR-250WMBL. . . . . . . . . .19

SO-AGR-375WMBT. . . . . . . . .19

SO-AGR-500WMBT. . . . . . . . .19

SO-AGR-750WMBT. . . . . . . . .19

SO-APC-100. . . . . . . . . . . . . . . .25

SO-APC-125. . . . . . . . . . . . . . . .25

SO-APEG3. . . . . . . . . . . . . . . . . .25

SO-APEG9. . . . . . . . . . . . . . . . . .25

SO-ASQ1 . . . . . . . . . . . . . . . . . . . . 7

SO-ASQ2 . . . . . . . . . . . . . . . . . . . . 7

SO-BAR5. . . . . . . . . . . . . . . . . . .13

SO-BAR9. . . . . . . . . . . . . . . . . . .13

SO-BAR11 . . . . . . . . . . . . . . . . . .13

SO-CAP3. . . . . . . . . . . . . . . . . . . . . 5

SO-CAP4. . . . . . . . . . . . . . . . . . . . . 5

SO-CAP7. . . . . . . . . . . . . . . . . . . . . 5

SO-CAP8. . . . . . . . . . . . . . . . . . . . . 5

SO-CAP9. . . . . . . . . . . . . . . . . . . . . 5

SO-CAP9CU. . . . . . . . . . . . . . . . . . 5

SO-CAP10. . . . . . . . . . . . . . . . . . . 5

SO-CAP11. . . . . . . . . . . . . . . . . . . 9

SO-CAP12. . . . . . . . . . . . . . . . . . . 9

SO-CAP13. . . . . . . . . . . . . . . . . . . 9

SO-CAP14. . . . . . . . . . . . . . . . . . . 9

SO-CAP15. . . . . . . . . . . . . . . . . .21

SO-CAP16. . . . . . . . . . . . . . . . . .21

SO-CAP17. . . . . . . . . . . . . . . . . . . 9

SO-CAP18. . . . . . . . . . . . . . . . . . . 9

SO-CAP19. . . . . . . . . . . . . . . . . . . 9

SO-CAP20. . . . . . . . . . . . . . . . . . . 7

SO-CAP22. . . . . . . . . . . . . . . . . . . 5

SO-CAP23. . . . . . . . . . . . . . . . . . . 9

SO-CAP25. . . . . . . . . . . . . . . . . . . 5

SO-CAP75. . . . . . . . . . . . . . . . . . . 5

SO-DISC1. . . . . . . . . . . . . . . . . . .21

SO-DISC2. . . . . . . . . . . . . . . . . . .21

SO-HCAP1. . . . . . . . . . . . . . . . . . 7

SO-HCAP2 . . . . . . . . . . . . . . . . . . . 7

SO-LINKL. . . . . . . . . . . . . . . . . .17

SO-LINKT. . . . . . . . . . . . . . . . . .17

SO-SC3 . . . . . . . . . . . . . . . . . . . . .11

SO-SC9 . . . . . . . . . . . . . . . . . . . . .11

SO-SC10. . . . . . . . . . . . . . . . . . . .11

SO-SCB. . . . . . . . . . . . . . . . . . . . .11

SO-SCB1. . . . . . . . . . . . . . . . . . . .11

SO-SCB2. . . . . . . . . . . . . . . . . . . .11

SO-SS1500. . . . . . . . . . . . . . . . .27

SO-SS1750. . . . . . . . . . . . . . . . .27

SO-SS2100. . . . . . . . . . . . . . . . .27

SO-SS2500. . . . . . . . . . . . . . . . .27

SO-SS2750. . . . . . . . . . . . . . . . .27

SO-SS3100. . . . . . . . . . . . . . . . .27

SO-SS3750. . . . . . . . . . . . . . . . .27

SO-SS4100. . . . . . . . . . . . . . . . .27

SO-SS4150. . . . . . . . . . . . . . . . .27

SO-SSCAP1R. . . . . . . . . . . . . . . .27

SO-SSCAP2R. . . . . . . . . . . . . . . .27

SO-SSCAP3 . . . . . . . . . . . . . . . . .27

SO-SSCAP4 . . . . . . . . . . . . . . . . .27

SO-SSCAP9 . . . . . . . . . . . . . . . . .27

SO-ST. . . . . . . . . . . . . . . . . . . . . .17

SO-TRAV . . . . . . . . . . . . . . . . . . .17

Click on the links below to open another catalog!

STANDOFFS CATALOG

WIRE SUSPENSION CATALOG

EZ-ROD & WIRE CATALOG

STRUCTURELITE CATALOG

HARDWARE CATALOG

2012 gyford standoff systems catalog

standoff caps

female caps

screw cap

choice of stud lengths

squarehex caps barrels

proper length stud

low profile caps

security caps 11barrels13hubs

Documents

long-range standoff weapons - united states navy...

marinette standoff report, part 2 of 7

marinette standoff report, part 1 of 7

international cybersecurity: sanctions or standoff...

manual tooling catalog - haegerlower tool holder, make sure...

standoff insulators

standoff radiation detectors assessment reportintroduction...

increased situational awareness and greater standoff

next generation standoff explosive & cwa detector

ied standoff cheat sheet

standoff - cdn.bakerpublishinggroup.com

modeling for standoff surface detection

oracle: standoff detection of hazardous gases

atx chassis standoff height bottom motherboard clearance

standoff raman spectroscopy system for explosives, chemical

portable standoff spectrometer for hazard identification...

explosion standoff distances - pdhonline.com

24 to 36 standoff - site pro 1

vision guided, hyperspectral imaging for standoff trace

marinette standoff report, part 4 of 7