3-1 derivatives of elementary weaves
Post on 26-Oct-2014
149 Views
Preview:
TRANSCRIPT
Chapter Three Derivatives of Elementary Weaves
These weaves are constructed by means of developing elementary weaves.
They are derived by changing the floats, number of shift, direction of diagonal lines, from plain, twill, and sateen/satin weaves, and retain their structural features.
3.1 Plain weave derivatives 3.2 Twill weave derivatives 3.3 Satin/sateen derivatives
The derivatives of elementary weaves include:
3.1 Plain weave derivatives.
3.1.1 Rib weaves
3.1.2 Hopsack weaves
3.1.1 Rib weaves
Rib weaves are obtained by extending the plain weave in either warp or weft direction.
Two kinds of rib weave: warp rib weaves weft rib weaves
1. Warp rib weaves
Warp ribs are constructed by inserting several picks in succession into the same shed of an ordinary plain weave. This forms a rib effect across the fabric. (see Fig. 3.1)
● Regular warp rib The same number of pic
ks are inserted in each successive rib, giving the fabric a regular appearance. See Fig. 3.3
This figure shows 3 picks are inserted into each shed
● Irregular warp rib
A variation in the width of rib is achieved by inserting different numbers of picks into each successive shed. See Fig. 3.4.
● The warp rib weave diagram is drawn as the following steps.
1) Calculating the weft repeat Ry : Ry = numerator + denominator
Ro = 2 2) Drawing the first end accordin
g to the fraction given. 3) Drawing the second end oppos
ite to the first one.
Example: 2/1 irregular warp rib
■■■■
■
■
■■■■
■
■
2. Weft rib weaves
Weft ribs are constructed with several warp threads used as one when interlacing with each pick in succession. They form a vertical rib effect in the fabric. (See Fig. 3.5 two ends are used as one)
● Regular weft rib An regular number of ends are used to
form each rib, giving the fabric a regular appearance. See Fig.3.6
Irregular weft rib
A variation in the width of the rib is achieved by varying the number of ends in each successive rib, as shown in Fig. 3.7.
● The weft rib weave diagram is drawn as following
1) Calculating the warp repeat Ro.
Ro = numerator + denominator
Ry = 2 2) Drawing the first pick accord
ing to the fraction given. 3) Drawing the second pick opp
osite to the first one.
■
Example: 2/1 Irregular weft rib
■ ■■■ ■
■■ ■■■ ■
Notes: Warp rib weaves produce ribs running weft-wayShown in Fig.3.1
Weft rib weaves produce ribs running warp-wayShown in Fig.3.5
● Applications Rib gives a more flexible cloth than plain weave
and has many applications. Fabrics are woven in silk, cotton, wool and
man-made fibers. Their end uses range from dress fabrics, coats, suits, millinery, ribbons and wedding to upholstery and drapery.
3.1.2 Hopsack weaves
Hopsack weaves are constructed by extending the plain weave both vertically and horizontally. See Fig. 3.8
● Regular hopsack Regular hopsacks are woven with the same
number of ends and picks and the same yarn count. Equal warp floats exchange with equal weft floats. See Fig. 3.9
● Irregular hopsack Different units of hopsack are arranged in
one repeat, with the distribution of warp or weft floats being equal or a predominance of either. See Fig. 3.10
● The irregular hopsack diagram is draw in following steps.
1) Calculating the repeat:
Ro = Ry = sum of the numerator +sum of the denominator 2) Drawing the first end and first pick based on the fract
ion. 3) Based on the first pick, drawing the ends which have
warp float same to first end. 4) Drawing the other ends opposite to the first one.
●Applications Hopsack weave fabrics are
less stiff than plain due to its fewer intersections, and they have smooth and lustrous surface. Hopsacks are suitable for Apparel, drapery, and are often used for selvedge of other fabrics.
Regular hopsack sample
Irregular hopsack sample
Home works: Drawing the weave diagrams1. 2/2 warp rib; 2. 2/2 weft rib; 3. 2/2 hopsack; 4. 3/3 hopsack; 5. warp rib
6. 3/1 weft rib, 7. hopsack
8. hopsack
21
22
23
23
12
21
top related