3-d paper snowflake · page 2 of 3 1. use printer paper or any type of thin paper. cut to 8.5 x...
Post on 20-Jan-2021
0 Views
Preview:
TRANSCRIPT
Cut on this l ine
Fold on this l ine
Scissors
Stapler
Double s ided tape
ASSEMBLY INSTRUC TIONS
YOU WILL NEED:
PAGE 1 OF 3
3-D PAPER SNOWFLAKE
PAGE 2 OF 3
1. Use pr inter paper or any t ype of thin paper. Cut to 8 .5 x 5 .5” s ize.
2 . Fold your paper into an accordion with each pleat the same width as the template.
3 . Fold your accordion together and s taple in the center.
4 . This i s what i t should look l ike. Now cut out your template and place on top or create your own pattern.
5 . Cut out your design mak ing sure you leave some of the folds on the s ides.
6 . This i s what the snow�ake looks l ike before i t ’s opened.
8 . Tape or g lue the t wo end pleats ( the ones seperated by the staple) together.
7 . Careful ly seperate the pleats. 9 . Add str ing to the snow�ake to hang and enjoy!
INSTRUC TIONS:
3-D PAPER SNOWFLAKE
PAGE 3 OF 3
3-D PAPER SNOWFLAKE
Use the other templates to make your own design!
Template
PAPER GINGERBEAD SNOWFLAKE
PAGE 1 OF 2
Cut on this l ine
Fold on this l ine
Scissors
ASSEMBLY INSTRUC TIONS
YOU WILL NEED:
PAPER GINGERBEAD SNOWFLAKE
PAGE 1 OF 2
1. Fold the square of paper in hal f d iagonal ly to make a t r iangle.
2 . Fold the t r iangle in hal f so the outer corners meet .
3 + 4 . Fold your t r iangle in thi rds. 3 + 4 . Fold your t r iangle in thi rds.
PAPER GINGERBEAD SNOWFLAKE
PAGE 2 OF 2
5. Cut this t r iangle pattern and lay on top of your fo lded paper.
6 . Cut out the pattern7. Open and reveal your gingerbread snow�ake!
top related