60pn6500 spring training pdp.pptx

Post on 21-Jan-2016

176 Views

Category:

Documents

29 Downloads

Preview:

Click to see full reader

DESCRIPTION

plasma trainingLG

TRANSCRIPT

Welcome to LG Electronics 2013 PDP TV Service Training

HE Division

National Trainer / HE

Presented by Nebil Yaylagul

nebil.yaylagul@lge.com

Welcome To

Antistatic Wrist Strap

Antistatic device is used to safely ground a person working on very sensitive electronicequipment. It prevents the buildup of static electricity on your body, which can result In electrostatic discharge ( ESD )

Technicians must wear an Antistatic Wrist Strap during servicing any LG product !!!!

http://www.newegg.ca/Product/Product.aspx?Item=N82E16899261005

PDP 60PN6500 SERVICE TRAINING

PN6500 SERIES

84” 60” 50” 46” 42” 37” 32”

YSUS

YDRV

CTRL

MAIN

Power Supply ZSUS

X Boards

60PN6500 Circuit Boards

60PN6500 Power supply VS Adj.

VA Tp.

VA Adj.

VS Tp.

Logic signals needed to

generate drive waveformGenerates Vsc, -Vy and V Set Up

from Vs by transformer

Control Board

IPM’s generate Sustain Waveform

Distributes 5v VA VS Distributes 5v

Distributes 5v VA

Receive 5V,Va, Vsfrom SMPS

Transfer Waveformto Y Drive Board

Z SUS Board

Top and Bottom Center and Left X Boards

Power Supply Board - SMPS

FETs amplify Sustain Wave-form

Generates Vsc, -Vy and V Set Upfrom Vs by transformer

Drive circuit generates Sustain Waveform

Transfer Waveformvia Y Drive Board to the panel

FETs amplify Sustain Wave-form

60PN6500 YSUS BOARD

Vset-UP

Vset-DN

VSC TEST P.

YSUS_DN / RECOVERYYSUS_UP DRIVE AMP.

VSC Adj

60PN6500 YSUS BOARD

V_SETUP & V_SETDN

Timing syncControlled by software and modulated by the CTRL board pulses.

V_SET UP

-VY

V_SET DN

YSUS Scan DATA

VSC Timing

YSUS WAVEFORM

X Board Right Top and Bottom

Distribute 5v, VA

Drivers generates erase,sustain waveforms

Generates Z Bias

Distributes 5v, VA, VS

FET Makes Drive waveform

Via FPC (flexible printed circuit )

Control Board Receive 5v, VA, VS

PSU Board

60PN6500 ZSUS Board

60PN6500 ZSUS Board

Tech must enter the white washMode before any adjustments.

ZSUS board supply the sustainpulse to the panel.

DC voltage Is adjusted by PDP specs and with GND. Reference.

VZBIASDC-115V.

ZSUS DATA

VZB Tp.

VZB Adj.

60PN6500 Main Board

2 Ch. Audio amp

LVDS

Video CPU

Keyboard/ IR

VS_DA Located on the Control Board just above the AUTO Gen Test Points may be used as an external trigger source for locking the waveform on the Oscilloscope

External Triggering of the Oscilloscope allows for a Stable Display of both the Y and Z SUS Output Waveforms regardless of how distorted the waveforms may be, allowing the wave shape and phasing to be easily examined.

60PN6500 Control Board

Auto Gen Tp.

5V. 3.3V.

R-G-B Data

CTRL Pulse

Making 전자 6-2

Revision

PDP TV SymptomA. Picture Problem

Mal discharge Symptom

Repair Process-Reference data

▣ Dot type Mal-discharge

A14

2011. 2 . 28

▣ Dark picture caused by Mal-discharge ▣ Scan type Mal-discharge symptom

MAL-DISCHARGE

Control scan related symptoms can be caused by YDRV circuit boards.Shorted drive chips prevents or interrupts the panel’s pixel mapping order.

MAL-DISCHARGE DUE TO SHORTED SCAN DATA

USB Download manual for User

1/10

TV Software Upgrade

Current Ver.

Ver. 01.02

Update Ver.

Ver. 01.03

IMFOMATION

CANCEL

FILE : Merge-42PX3D-UE-RELEASE-0x0103.bin

START

1. USB Download manual for User

2/10

To start upgrading your TV Set, please follow the procedures:

1. Press an arrow key on your remote to reach START on the screen.2. Press ENTER key on your remote to start downloading.

If you do not want to download the upgrade file, please press the arrow key to reach CANCEL on the screen.Then, press the ENTER key on your remote.

1. Power On2. Insert usb-stick to usb port in monitor. If download file is over than current version,

Main picture will be diplayed below (If download file is not exsited in usb stick or under than current version, nothing will be displayed)

< Copying the file from the Memory >

TV Software Upgrade

Copy the file from the Memory…

Do not remove the memory card from the port ! Do not plug off !

1. USB Download manual for User

3. Download starting through pressing the enter key in remocon

3/10

TV Software Upgrade

UPGRADING...

10 % Do not plug off !

<Upgrade Progressing Picture>

4. Automatical updating after file downloadingAt this time, it is possible for removing usb stick. But power must be supported in TV Set.

1. USB Download manual for User

4/10

TV Software Upgrade

UPGRADING...

< Upgrade Ending Picture >

COMPLETED

1. USB Download manual for User

5/10

5. If “COMPLETED” message is displayed in picture after completing up-grade, Downloading is over.TV Set is automatically reseted.

Thank you / Mercihttp://www.lg.com

20% 30% 40% 50% 60% 70% 80% 90% 100%

20%30%40%50%60%70%80%90%100%

60PN6500

PDP TV Skill Quiz

A- In start System 1

B- In start System 2

C- No Serial no# to be entered for this model

D- Adjust option menu

Q1- After replacement of a main board, where can we input model & serial number into TV set?

PDP TV Skill Quiz

A- Smart Phone

B- USB 2

C- Windows 7 desktop computer.

D- AC-3 / PCM .

Q2- What Audio format is compatible with LG TV.

PDP TV Skill Quiz

Q3- If there is no raster on TV, where should we check first?

A- Replace the main board

B- Replace the Power supply board

C- Replace YSUS board

D- Perform the AutoGen test procedure for panel’s diagnostics.

PDP TV Skill Quiz

Q4- What can cause a dark and faded image on plasma panel?

A- Defective YSUS

B- Faulty power supply board.

C- Defective Control board

D- Defective ZSUS

PDP TV Skill Quiz

60PN6500

PDP TV Skill QuizThe Answers !!

A- In start System 1

B- In start System 2

C- No Serial no# to be entered for this model

D- Adjust option menu

Q1- After replacement of a main board, where can we input model & serial number into TV set?

A- Smart Phone

B- USB2 input

C- Windows 7 desktop computer.

D- AC-3 / PCM

Q2- What audio format is compatible with LG TV?

Q3- If there is no raster on TV, where should we check first?

A- Replace the main board

B- Replace the Power supply board

C- Replace YSUS board

D- Perform the AutoGen test procedure for panel’s diagnostics.

Q4- What can cause a dark and faded image on plasma panel?

A- Defective YSUS

B- Faulty power supply board.

C- Defective Control board

D- Defective ZSUS

top related