a high performance, continuously variable engine intake manifold adam vaughan the cooper union...

A High Performance, Continuously VariableEngine Intake Manifold

Adam Vaughan

The Cooper UnionAlbert Nerken School of Engineering

2010 Master’s ThesisSAE Papers 2011-01-0420 & 2010-01-1112

• Improve drivability and increase engine performance:

Variable runner length intake– Wider power band

• Easier for non-professional drivers• Increase low end torque• Keeps top end power

– Simpler and safer than turbo / variable valve timing• > 60% of cars Do Not Finish• Failure mode is a static intake

• Develop calibrated 1D model

Goals

• 20 mm diameter flow restriction– Always at part load

• Packaging envelope• Throttle before restriction• Engine displacement < 610 cc

– Modified Suzuki GSXR-600®– 599 cc, SI, 4-stroke, inline 4-cylinder– DOHC, 16-valve, pent roof– 13.5:1 compression ratio– MicroSquirt® Port Fuel Injection

Constraints

Short Runner Length

Long Runner Length

A New ContinuouslyVariable Half-Tube Design

(measured from back of valve)

Restrictor

Fuel Rail

Servo

Rubber Moldof Intake Port

Variable Runners

Static Runner

© 2009 FSAE® Rules

Overall Layout

2010-01-1112

4045

45

47

47

4750

50

52

52

52

52

53

53

53

54

54

54

55

55

56

56

7000 8000 9000 10000 11000 12000Engine Speed (rpm)

175

200

225

250

275

300

Runn

er L

engt

h (m

m)

-25%-20%

-15%-10%

-5%

0%

0%

0%

0% 0% 0%

0%

0%

0% 0%

0%

0%

1%1%

1%

1%

1%

1%

1%

1%

2%

2%

2%

3%3%

3%

3%

3%

4%

4%

4%

4%

4%

5%

5%

5%

7000 8000 9000 10000 11000 12000Engine Speed (rpm)

175

200

225

250

275

300

Runn

er L

engt

h (m

m)

Contours of Torque (N·m) % Difference From Baseline

Not Packageable

1D Simulation

Selected design

Gambit® Mesh

Fully automated generation of meshed geometries through

custom Matlab® script or C# GUI

Gambit® Mesh

Fully automated generation of meshed geometries through

custom Matlab® script or C# GUI

Fluent® Simulation

Batch simulation of meshed geometries controlled through

custom Matlab® script or C# GUI

Fluent® Simulation

Batch simulation of meshed geometries controlled through

custom Matlab® script or C# GUI

Restrictor Variables

❶ Inlet diameter❷ Inlet taper angle❸ Outlet taper angle❹ Outlet diameter

Restrictor Variables

❶ Inlet diameter❷ Inlet taper angle❸ Outlet taper angle❹ Outlet diameter

DDooEE

2D Axisymmetric Steady State Restrictor DoE

Outlet taper angle

Inlet taper angle

Inlet diameter Outlet diametersymmetry axis

Choked flow

Contours of Mach Number

Velocity Vectors (m/s)(Along Mid-Runner Plane)

Velocity Contours (m/s)(Along Mid-Plenum Plane)

3D Steady State

Fabricated Intake(using both CNC and 3D printed molds)

• Greatly simplifies the wiring harness → only two wires (CANH & CANL) + GND• Used to send and receive data amongst different controllers (e.g. engine speed)• Up to 1 Mbit/s & noise immune

Controller Area Network

MicroSquirt™ Engine Controller•Executes code for injection and spark timing•Includes built-in injector and coil drivers•Provides CAN interface for real-time engine status & engine control parameter modification

MicroSquirt™ Engine Controller•Executes code for injection and spark timing•Includes built-in injector and coil drivers•Provides CAN interface for real-time engine status & engine control parameter modification

CAN bus

Aft PCB dsPIC® CAN Node•Variable intake control•WiFi™ Telemetry•Power control (e.g. fan PWM)

Aft PCB dsPIC® CAN Node•Variable intake control•WiFi™ Telemetry•Power control (e.g. fan PWM)

Dashboard dsPIC® CAN Node•CAN for signals (e.g. coolant T)•Tachometer / idiot LEDs & LCD•Gear position segment LED

Dashboard dsPIC® CAN Node•CAN for signals (e.g. coolant T)•Tachometer / idiot LEDs & LCD•Gear position segment LED

Traction dsPIC® CAN Node•Traction control algorithm•Measure wheel speed encoders•Retard spark over CAN

Traction dsPIC® CAN Node•Traction control algorithm•Measure wheel speed encoders•Retard spark over CAN

Fabricated Front PCBFabricated Aft PCB

Intake CAN Integration

• Intake servo control using CAN provided engine speed• Fan / coolant pump PWM using CAN provided coolant temp.• Provides gear position over CAN• Centralizes the car’s electric power distribution

— Simple point-to-point wiring harness— Provides fuses and relays

• WiFi™ telemetry

Aft PCB

• Dashboard dsPIC®— Using CAN, it displays through the LCD and LEDs:

• Engine speed from MicroSquirt™• Coolant temperature from MicroSquirt™• Current gear from Aft PCB, etc…

• Traction control dsPIC®— Measures wheel encoders and can modify MicroSquirt™ spark timing over CAN

Front PCB

Torque & Power Curves at WOT

Measured Power (kW)preliminary engine calibration, unoptimized cams

Measured Torque (N·m)preliminary engine calibration, unoptimized cams

Measured Torque (N·m)preliminary engine calibration, unoptimized cams

4045

45

47

47

4750

50

52

52

52

52

54 54

55

55

56

56

7000 8000 9000 10000 11000 12000Engine Speed (rpm)

175

200

225

250

275

300

325

Runn

er L

engt

h (m

m)

38

3839

39

39

4041

4243444546

4747

47

4848

48 48

48

49

49

49

4949

49

50

50

50

50

51

51

52

7000 8000 9000 10000 11000 12000Engine Speed (rpm)

175

200

225

250

275

300

325

Runn

er L

engt

h (m

m)

Simulated Torque (N·m)before experimental data were available

Torque Contours at WOT

38

3839

39

39

40414243444546

4747

47

48

48

48 48

48

49

49

49

49

4949

49

50

5050

5050

51

51

52

7000 8000 9000 10000 11000 12000Engine Speed (rpm)

225

250

275

300

325

Runn

er L

engt

h (m

m)

Measured Torque (N·m)preliminary engine calibration, unoptimized cams

Measured Torque at 9,500 RPMpreliminary engine calibration, unoptimized cams

Transient Response at WOT

• Designed, analyzed and fabricated a functional variable intake– >22% peak power improvement over previous team’s unoptimized static

intake– Empirically demonstrated the ability to shift resonance peak real-time– “More-drivable” engine– <1% increase in powertrain weight

• Implemented a CAN microcontroller network– Intake control, dashboard and traction control

• Developed platform for automated Fluent® studies• Gained experience working with carbon fiber

– Quasi-isotropic FEA for relative improvements

Summary

• Optimize intake cam profile• Additional dynamometer testing

– Fix test stand cooling issues– Measure volumetric efficiency directly– Refine engine calibration– Part load operation & BSFC

• Expand CFD studies– Calibrate Ricardo WAVE® model against dyno data– Perform coupled transient simulations with Vectis®/Fluent®– Integrate gradient based design optimization

• Improve CFRP FEA simulations• Gather actual track data

Future Work

• Friends & Family• Formula SAE®

• Ricardo®, Inc.• Agilent Technologies®, Inc.• Albert Nerken School of Engineering• Cooper Union Student & Central Machine Shop• Cooper Motorsports FSAE® team

Acknowledgements