alcoprint printing chemicals
Post on 12-Mar-2015
1.839 Views
Preview:
TRANSCRIPT
PRINTING CHEMICALS
.for PIGMENT COLORS
for REACTIVE DYES
for DISPERSE DYES
Disperse dyes are water insoluble and also dispersible in water High energy dyes become soluble > 160 CMedium energy dyes become soluble > 140 CLow energy dyes become soluble > 110 CThey are THERMO- SOLUBLE (Thermosol)
Reactive dyes are water soluble but are hydrolyzed by water
Pigment Colors are water insoluble but dispersible in water
SOLUBILITY
The three primary components for pigment printing pastes are •Pigment dispersion• Binder•Thickener
Pigment particles are dispersed in water with chemicals such as glycols, emulsifiers, dispersants, etc., to give stable dispersions. (Pigment dispersion)
Pigment printingPigment print pastes are sensitive to increases in temperature and must not be mixed for long periods (heat generation) they should be stored in a cool place and kept covered to prevent skin formation on the paste surface by warm air interacting withthe binder.
A high pH using volatile amines such ammonia as an important role in print productivity, especially in hot conditions.
Thickener Binder pH Mechanisms
pH 3pH 5pH 8pH 5pH 3 PRINT
Acrylic acidAcrylamide
AlcoprintThickener
+Ammonialiquor
+Ammonialiquor
AmmoniaGas
Print Paste Dry Cure+150C
pH 5 -8 pH 8
pH 7Higher Viscosity
Print paste
pH 5Lower Viscosity
Print paste
pH 5 pH 3PRINT
Print Paste Dry CureCross link
--------------------------------------------------------------------------------------------------------------------------------------------------------
Thickeners
Binders
Butyl AcrylateStyrene,
High Water or Air Temperaturesincrease pH with Ammonia
0
1
2
3
4
5
6
7
8
9
10
0 5 10 15 20 25 30 35 40 45
Temperature C
pH pH
Recommend pH 8-9
Binder will cross link at low pH
PRINTING CHEMICALS for PIGMENT COLORS
PRINTING CHEMICALS FUNCTION
ALCOPRINT PBA BINDERALCOPRINT PX-GM METALIC BINDERALCOPRINT PSC SOFTENERALCOPRINT PS-LF SOFTENER & FIXER ALCOPRINT PFL FIXER
ALCOPRINT PA-NS ANTIFOAM (non silicon)ALCOPRINT PD-ER EMULSIFIER –DISPERSANTALCOPRINT PDN DISPERSANT/ – ANTI GELL
BURST 100 ANTIFOAM (low smoke) LYOPRINT AP ANTIFOAM - PENETRANT LYOPRINT DA DISCHARGING AGENT
ALCOPRINT THICKENERS for PIGMENT COLORS
PTP
PTNPT-RV
PT-XN
PT-FV
PTF
PTK
Penetration Print
Surface Print
ALCOPRINT PTK 4g/KgPT 21 30g/KgPTN 18g/KgPT-RV 16 g/KgPT-FV 16g /KgPT-XN 16g/KgPTP 12 g/KgPTF 16g/Kg
Approx Working. Dosage
PT 21
SUITABLIITY of ALCOPRINT THICKENERS containing LYOPRINT DA
PTNPT-RV
PT-XN
PT-FV
PTF
NOT Suitable
Recommended
ALCOPRINT PT 21 40 –60g/KgPTN 30- 50 g/KgPT-RV 30-60 g/Kg
Approx. Working Dosage
PT 21
PTP
PRINTING RECIPE for PIGMENT COLORED DISCHARGE
* ALCOPRINT PT 21 40 -60g/KgPTN 30- 60 g/KgPT-RV 30-60 g/Kg
Approx. Working Dosage
GUIDE RECIPE g/kg
COLD WATER XTriethanolamine 3 Ammonia liquor 25% 0-5 Lyoprint AP 3 - 5Lyoprint DA note 1 80 - 200Alcoprint PBA note 2 80 - 200Alcoprint * 12 - 30
----------1000g
note1 depends on the dyed ground note 2 pigment binder ration 1:3 & 1:4 for dark shades
PRINTING RECIPE for PIGMENT COLORS
* ALCOPRINT PTK 4g/Kg + PT- RVPT 21 30g/KgPTN 18g/KgPT-RV 16 g/KgPT-FV 16g /KgPT-XN 16g/KgPTP 12 g/KgPTF 16g/Kg
Approx. Working Dosage
GUIDE RECIPE g/kg
CHILLED WATER XAmmonia liquor 25% note 1 0 - 8Alcoprint PA-NS 5 -10Alcoprint PBA note 2 80 - 200Alcoprint * 12 - 30
----------1000g
note1 maintain pH 8-9note 2 pigment binder ration 1:3 & 1:4 for dark shades
Water insoluble Pigment particles surrounded by the binder film
SyntheticFiber
Pigment particles do NOT diffuse into the fibersBinder adheres to the outside of the fibers Pigment particles are surrounded within the binder film
Cure for 5mins @ 150C
Binder pigment ratios High binder ration, better crocking
PIGMENT BINDER FILM
Pigment particle 0.3- 0.5 microns, binder film minimum 0.5 micron thickness
0:1 2:1 3:1 4:1,
BINDER FILM with ALCOPRINT PFL
SyntheticFiber
ALCOPRINT PFL adheres to synthetic fibers and acrylic binder during cross-linking Improving wet crocking fastness
ALCOPRINT PFL fixing agent
ALCOPRINT PFL
23/44/5
3/44
4/5
33/44
100% PolyesterNo Fixing Agent0.5% ALCOPRINT PFL1.5% ALCOPRINT PFL
44/55
33/44
33/44
100% CottonNo Fixing Agent0.5% ALCOPRINT PFL1.5% ALCOPRINT PFL
3/44
4/5
44
4/5
33/44
50/50 T/CNo Fixing Agent0.5% ALCOPRINT PFL1.5% ALCOPRINT PFL
Wash Fastness
Dry RubWet RubFabric
PIGMENT
PRINTING CHEMICALS for DISPERSE DYES
PRINTING CHEMICALS FUNCTION
CIBATEX AR ANTI REDUCING AGENT( acid stable)
LYOPRINT AP ANTIFOAM- PENETRANTLYOPRINT AIR DE-AIRING
ALCOPRINT PDN DISPERSANT
ALCOPRINT THICKENERS for DISPERSE DYES
DT-CS
RD-HT
RTA
Penetration Print
Surface Print
ALCOPRINTDT-CS 60g/KgRD-HT 45g/KgPTF 18g/KgRTA 20g /KgApprox Working Dosage
PTF
PTF stiff PES fabrics
RTA Pile PES fabrics
PRINTING RECIPE for DISPERSE DYES
GUIDE RECIPE g/kg
Water XLyoprint AP 5 - 10Cibatex AR 10Alcoprint PDN 2 - 10Alcoprint * 18 - 60
----------1000g
* ALCOPRINTDT-CS 60g/KgRD-HT 45g/KgPTF 18g/KgRTA 20g /KgApprox Working Dosage
Thickener Hydration (Swelling) Times
BOIL &COOL
Alginate Swelling & Mixing Times in WaterPowder 15 mins 60 mins 3 hours 4-8 hours
Alcoprint Swelling & Mixing Times in Waterliquid 10 mins 20 mins
RTADT-CSPTF
RD-HT
NATURAL Guar Gums (Boil)
ALCOPRINTS
RD-HT Contains milled Sodium alginate
DRIED THICKENER FILM
Natural Thickener ALCOPRINT DT-CS
Thick hard film Thin flexible film
PES FiberPES Fiber
Medium hard film
ALCOPRINT RD-HT
PES Fiber
DISPERSE DYES Water INSOLUBLE
DYE DIFFUSION AFTER FIXATION
Natural Thickener ALCOPRINT DT-CS
70% dye diffusionThick hard film
>95% dye diffusionThin flexible film
PES FiberPES Fiber
80% dye diffusionMedium hard film
ALCOPRINT RD-HT
PES Fiber
DISPERSE DYES are THERMOSOLUBLE and DIFFUSE slowly into HYROPHOBIC FIBRES
PRINTING CHEMICALS for REACTIVE DYES
PRINTING CHEMICALS FUNCTION
LYOPRINT RG ANTI REDUCING AGENT ( granules and liquid ) ( alkali stable)
LYOPRINT AP ANTIFOAM - PENETRANTLYOPRINT AIR DE-AIRING AGENTLYOPRINT LA Conc. EMULSIFIER (water in oil)
ALCOPRINT PDN DISPERSANT
ALCOPRINT THICKENERS for REACTIVE DYES
RT-BC
RD-HT
RTA
Penetration Print
Surface Print
RD-HT +PTK 40g/20g/ KgRD-HT 55g/KgRT-BC 60g/KgRTA 60g/Kg Approx Working. Dosage
RD-HT+PTK
RT-BC+PTK
Thickener Hydration (Swelling) Times
Alginate Swelling & Mixing Times in WaterPowder 15 mins 60 mins 3 hours 4-12 hours
Alcoprint Swelling & Mixing Times in Waterliquid 15 mins 20 mins
RTART-BCPTK
RD-HT
NATURAL SODIUM ALGINATES
ALCOPRINTS
Reactive Dyes
RD-HT Contains milled Sodium alginate
DRIED THICKENER FILM
Alginate Thickener Film ALCOPRINT RD-HT+ PTK Film
Thick hard film Thin flexible film
REACTIVE DYES water SOLUBLE
Cellulosic FiberCellulosic Fiber
DYE DIFFUSION AFTER STEAM FIXATION
Natural Thickener Film ALCOPRINT RD-HT+ PTK Film
70% dye diffusion thruThick hard film
95% dye diffusion thruThin flexible film
Water Soluble REACTIVE DYES DIFFUSE quickly into HYROPHILIC FIBERS
Cellulosic FiberCellulosic Fiber
IMPROVED DIFFUSION WITH LYOPRINT AP ADDITION
Natural Thickener Film ALCOPRINT RD-HT+ PTK Film
80% dye diffusion thruThick hard film
>95% dye diffusion thruThin flexible film
Cellulosic Fiber Cellulosic Fiber
Water Soluble REACTIVE DYES DIFFUSE into the HYDROPHILIC FIBER
PRINTING RECIPE for REACTIVE DYES
GUIDE RECIPE g/kg Water XSodium carbonate note1 5Sodium bicarbonate 30Lyoprint RG 10Lyoprint AP 5 Urea 100 - 200Alcoprint * 45 - 60
----------1000g *ALCOPRINT
RD-HT 45g/KgRT-BC 60g/KgRTA 60g/KgPTK 20g/KgApprox Working. Dosage
Note 1 where Alcoprint PTK is used
top related