aluminum high performance gear pumps - phphyds.com gear pump.pdf · aluminum high performance gear...
Post on 23-Mar-2019
224 Views
Preview:
TRANSCRIPT
ALUMINUM HIGH PERFORMANCE GEAR PUMPS
- - - -AP 20 1R K
Series Shaft
1- 5/8" Dia. Str. Keyed (Optional)
Rotation
R - RightL - Left
Port Location
2- 3/4" Dia. Str. Keyed (Standard)9- SAE- 9 Tooth Spline (Standard)11- SAE 11 Tooth Spline (Optional)
Code Minimum
RPM
MaximumRPM
Max. ContinuousPressure (PSI)cm /rev.
Pump Flow GPM@1800 RPM/3000 PSI
Technical Specifications
FEATURES EXTRUDED ALUMINUM DIE CAST BODY ALUMINUM MOUNTING FLANGE / COVER FLOATING AXLE SLEEVE AND DU BEARINGS DOUBLE LIP SHAFT SEAL TO PREVENT CAVITATION AND LEAKAGEPRESSURES TO 3600 PSISPEED 600 TO 3000 RPMHIGH TEMPERATURE SEALS AND GASKETSALL UNITS 100% FACTORY TESTED
OPTIONS* MOUNTING - S.A.E. EUROPEAN, DIN * PORTS AVAILABLE - S.A.E. NPT, BSP, METRIC * ONE PIECE SHAFT & GEAR ASSEMBLY* INTEGRAL RELIEF / PRIORITY CONTROL* SINGLE / TANDEM UNITS * VITON SEALS* SIDE OR REAR PORTS
Model
S
Mounting
- F
F- STD for 6,8,10Inlet 7/8-14 Outlet 3/4-16P- STD For 12,14,16,20,25
S- SAE AE-EUROPEAND - DIN
Inlet 1-5/16 -12 Outlet 1-1/16-12
Port Size
K- Side (STD)Q- Rear (Optional)
Theoretical Displacementin /rev.
Approx. Weightlbs (kg)
2.783.814.385.396.327.219.1811.20
600
4.4 (2.0)4.6 (2.1)4.8 (2.2)5.0 (2.3)5.3 (2.4)5.5 (2.5)5.7 (2.6)5.9 (2.7)
3000
3000
30003000
AP:Pump
AM: Motor
68
10121416
2520
0.520.620.760.850.981.221.53
0.38
3000
3000
30003000
3600
3600
300030003600
3000
36003600
AP- PUMPAM- MOTOR
See technical specifications
-Special Features
-
Priority CoverFlow Control CoverRelief Cover
3 3
Displacementcm /rev3
Model
68
10121416
2520
ALUMINUM HIGH PERFORMANCE GEAR PUMPS
AP16
AP25
AP20
AP14
AP12
4.69 (119)
5.24 (133)
4.92 (125)
4.53 (115)
4.45 (113)
2.07 (52.5)
2.36 (60)
2.20 (56)
2.01 (51)
1.97 (50)
AP10
AP08
AP06
MODEL
4.29 (109)
4.19 (106.5)
4.06 (103)
Ain(mm)
1.89 (48)
1.85 (47)
1.77 (45)
Bin(mm)
7/8-14SAE-10
3/4-16SAE-8
M Thread IN/OUT
INLET OUTLET
1 5/16-12 SAE-16
1 1/16-12 SAE-12
DIMENSIONAL INFORMATION
��������
�����
�
� �������
�
����� �
�������
��������
�� ����
�����������
��
���������
�������������
�����
���������
��� �
������
�
M
FRONT VIEW SIDE VIEWO 1.77(45)
�������������
� �(18.3)
�����
������
SPLINE SHAFT16/32 9 TOOTHFLAT ROOT SIDE FIT
key (.187x .48)
KEYED SHAFT.75 DIA x .187 KEY
�������
ALUMINUM HIGH PERFORMANCE GEAR PUMPS
Model
0.38(6)
0.52(8)
0.62(10)
0.76(12)
0.85(14)
1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800 1200 1500 1800
0.98(16)
1.22(20)
1.53(25)
1200 1500 1800 1200 1500 1800 1200 1500 1800
Performance Data - Typical Flows at 120° F, 10 W oil (128SUS), 0 PSI inlet Flow in Gallons Per Minute (GPM).
3
AP6
AP8
AP10
AP12
AP14
AP16
AP20
AP25
Displacement 0 PSI (cm /rev)
1.98 2.47 2.97 2.70 3.34 4.04 3.23 4.00 4.79 3.96 4.93 5.94 4.39 5.48 6.60 4.97 6.32 7.73 6.23 7.85 9.47 8.00 9.83 11.87
RPM 500 PSI
1.94
2.93 2.63 3.29 3.98 3.09 3.87 4.66 3.81 4.73 5.68 4.32 5.34 6.54 4.87 6.21 7.68 6.15 7.76 9.36 7.80 9.70 11.5
2.41 1.93
2.38 2.89 2.60 3.28 3.95 3.02 3.8 4.62 3.72 4.62 5.64 4.23 5.21 6.43
6.13 7.58 6.11 7.70 9.31 7.70 9.64 11.36
1500 PSI
4.82
1.89 2.33 2.85 2.55 3.24 3.90 2.94 3.73 4.55 3.62 4.54 5.52 4.14 5.20 6.36 4.74 6.08 7.51 6.08 7.67 9.24 7.63 9.51 11.19
1000 PSI 2000 PSI
1.84 2.32 2.81 2.51 3.22 3.89 2.90 3.68 4.48 3.56 4.49 5.47 4.10 5.14 6.33 4.72 6.02 7.43 6.04 7.60 9.24 7.60 9.44 11.15
1.82 2.30 2.79 2.48 3.17 3.85 2.89 3.65 4.41 3.53 4.42 5.45 4.09 5.11 6.33 4.70 6.02 7.40 6.00 7.60 9.18 7.61 9.46 11.19
2500 PSI
1.80 2.27 2.78 2.45 3.16 3.81 2.84 3.59 4.38 3.54 4.40 5.39 4.04 5.10 6.32 4.61 5.91 7.21 5.98 7.59 9.18 7.61 9.53 11.2
3000 PSI3in /rev
ALUMINUM HIGH PERFORMANCE GEAR PUMPS
ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13
DESCRIPTIONSNAP RINGSHAFT SEAL SHAFT END COVERGASKET SEALANTI-EXRUSION SEALBUSHINGDRIVE GEARKEYDRIVEN GEARPINBODYCOVERBOLTS
REQ'S1112221112114
DESCRIPTION
10
12
3 4
5
7
1 2
6
118
13
6
10
9
54
L
MODEL CODE Displacement Pressure Speed (RPM) L L1 Inlet Outlet in3/rev (cm3/rev PSI (Mpa) inch(mm) inch (mm) (D1) (D2)
Rated Max. Rated Max. Min.
AAP-1-SR1F (1) .06 (1.1) 2900 (20) 3625 (25) 2000 4500 500 3.22 (82) 1.65 (42) SAE8 SAE6
AAP-2-SR1F (2) .12 (2.0) 2900 (20) 3625 (25) 2000 4500 500 3.30 (84) 1.69 (43) SAE8 SAE6
AAP-3-SR1F (3) .21 (3.4) 2900 (20) 3625 (25) 2000 4500 500 3.38 (86) 1.73 (44) SAE8 SAE6
AAP-4-SR1F (4) .25 (4.1) 2900 (20) 3625 (25) 2000 4500 500 3.46 (88) 1.75 (45) SAE8 SAE6
AAP-5-SR1F (5) .31 (5.1) 2900 (20) 3625 (25) 2000 4500 500 3.54 (90) 1.81 (46) SAE8 SAE6
AAP-6-SR1F (6) .37 (6.1) 2900 (20) 3625 (25) 2000 4500 500 3.66 (93) 1.89 (48) SAE8 SAE6
AAP-7-SR1F (7) .43 (7.0) 2900 (20) 3625 (25) 2000 4500 500 3.77 (96) 1.92 (49) SAE8 SAE6
AAP-8-SR1F (8) .48 (7.8) 2900 (20) 3625 (25) 2000 4500 500 4.01(102) 2.00 (51) SAE8 SAE6
1.06(27)
.75(19) .49
(12.5)
.25(6.4)
3.25(82.55)
.787(20)
.48(12)
1.06(50.8)
.5 Dia(12.7).125 key
(3.18).40(10.3)
2.60(66)4.01(102)
3.30
(84)
.47(12)
3.1
(81)
AAP - 3 - S - R - 1 - F
AAP: Pump Porting: F : SAE-8 (3/4-16UNF) x SAE-6 (9/16-18 UNF)AAM: Motor
Displacement Shaft: Code 1 - 1/2" Dia. 1/8" Key(See chart selection)
Mounting: SAE-AA 2 Bolt Rotation: R : C.W. L: C.C.W.
Model code
Dimension: Inches (Millimeters)
SAE: AA 2 Bolt Mount
AAP SERIESALUMINUM GEAR PUMPS
MODEL CODE Displacement Pressure Speed (RPM) L L1 Inlet Outlet in3/rev (cm3/rev PSI (Mpa) inch(mm) inch (mm)
Rated Max. Rated Max. Min
ABP-22-SR1F (22) 1.34 (22) 2900 (20) 3625 (25) 2000 3000 400 5.15 (131) 2.59 (66)
ABP-26-SR1F (26) 1.58 (26) 2900 (20) 3625 (25) 2000 3000 400 5.27 (134) 2.63 (67)
ABP-34-SR1F (34) 2.07 (34) 2900 (20) 3625 (25) 2000 3000 400 5.47 (139) 2.71 (69)
ABP-39-SR1F (39) 2.38 (39) 2900 (20) 3625 (25) 2000 3000 400 5.63 (143) 2.79 (71) SAE16 SAE12
ABP-43-SR1F (43) 2.62 (43) 2900 (20) 3625 (25) 2000 2800 400 5.78 (147) 2.87 (73) 15/16-12 11/16-12
ABP-51-SR1F (51) 3.11 (51) 2900 (20) 3625 (25) 2000 2800 400 5.98 (152) 2.99 (76)
ABP-61-SR1F (60) 3.66 (60) 2600 (18) 3300 (23) 1800 2800 400 6.22 (158) 3.11 (79)
ABP-70-SR1F (70) 4.27 (70) 2500 (17) 2900 (20) 1800 2500 400 6.54 (166) 3.22 (82)
ABP-78-SR1F (78) 4.76 (78) 2300 (16) 2900 (20) 1800 2300 400 6.73 (171) 3.35 (85)
ABP-89-SR1F (89) 5.43 (89) 2000 (14) 2600 (18) 1800 2000 400 6.93 (176) 3.46 (88)
ABP -22 - S - R - 1 - F
AAP: Pump Porting: F : SAE-16 (15/16-12UNF) x SAE-12 (1116-12 UNF)AAM: Motor
Displacement Shaft: Code 1 - Keyed 7/8" Dia. 1/4" Key(See chart selection) Code 2 - Slined 7/8-13 Tooth
Mounting: SAE-B 2 Bolt Rotation: R : C.W. L: C.C.W.
Model code
ABP SERIESALUMINUM GEAR PUMPS
2 - .57 Dia.(14.5)
6.85 (174)
5.75 (146).25
(6.35)
4.52(115)
1.61(41).38
(9.7)
4.00(101.6)
.98(25))
.875(22.2)
Dimension: Inches (millimeters)
SAE-B 2 Bolt Mount
Optional spline shaft availableSAE-B 7/8-13 Tooth
10.72
8.40
9.38
6.70
5.36
4.00
2.68
1.34
15.9
7.9
14.5
13.2
11.9
5.2
10.6
6.6
4.0
2.6
1.3
500 1000 1500 2000 2500 3000
10.72
9.38
8.40
6.70
5.36
4.00
2.68
1.34
15.9
14.5
13.2
11.9
10.6
7.9
6.6
5.2
4.0
2.6
1.3
500 1000 1500 2000 2500 3000
10.72
8.40
9.38
6.70
5.36
4.00
2.68
1.34
15.9
14.5
13.2
11.9
10.6
7.9
6.6
5.2
4.0
2.6
1.3
500 1000 1500 2000 2500 3000Pressure (PSI)
Pressure (PSI)Pressure (PSI)
Flow(GPM)
Flow(GPM)Flow
(GPM)
Power(H.P.)
Power(H.P.)
Power(H.P.)
NBC-8
NBC-16NBC-11
Performance Curves** Speed: 3600 RPM** Oil: N46
NBC TWO STAGE HYDRAULIC PUMPS
PHP introduces A. F. D. Flow divider
Order CodeAFD-
DisplacementEach / Section
SAE Ports MinimumFlow/
Section
MaximumFlow/
Section
Cont. Diff. PressureBetween
Inlet/Outlet
MaximumOutlet
PressureAny Section
Dimensions inches (millimeters)
In.3 Cm.3 Inlet Outlet GPM L/M GPM L/M PSI BAR PSI BAR A B C D
06 .97 1.60 9/16-18 9/16-18 0.8 3.0 1.7 6.4 1800 124 3500 241 5.0(127.7)
5.2(131.9)
5.4(138.2)
6.6(166.7)
5.9(150.9)
6.2(157.3)
6.4(163.6)
6.5(166.0)
6.0(153.5)
6.2(157.7)
6.5(164.3)
7.6(192.0)
7.0(176.7)
7.2(183.1)
7.4(189.4)
7.6(191.8)
2.6(65.5)
2.7(69.7)
3.0(76.0)
3.3(84.1)
3.5(88.7)
3.7(95.1)
4.0(101.4)
4.0(103.8)
2.2(57.7)
2.4(59.8)
2.5(63.0)
3.0(77.8)
2.7(69.4)
2.9(72.6)
3.0(75.72)
3.0(76.9)
08 .129 2.13 3/4-16 3/4-16 1.2 4.5 2.5 9.5
12 .194 3.18 7/8-16 9/16-18 1.7 6.4 4.5 13.2
16 .258 4.24 7/8-14 7/8-14 2.5 9.5 5.0 18.9
20 .323 5.29 7/8-14 7/8-14 3.0 11.4 6.0 22.7
24 .388 6.36 7/8-14 7/8-14 3.5 13.2 7.0 26.5 1600 110
28 .453 7.42 7/8-14 7/8-14 4.0 15.1 8.0 30.3 1300 90
32 .517 8.42 7/8-14 7/8-14 4.5 17.0 9.0 34.1 1200 83
NOW IN STOCK
MODEL CODE AFD - 16 / 16
ALUMINUM DISPLACEMENT PRODUCTION FLOW DIVIDER PER / SECTION
Rotary flow dividers
fixed displacement
Two Sections
Adjustable port reliefs
each section
E7.1
P3
P1 P2
P1 = Pressure at the inlet of the Flowdivider
P2 = Pressure adjustment of the mainrelief
P3 = The outlet pressure of the flowdivider
P4 = Differential relief pressureadjustment (450 PSI)
AFD rotary gear flow dividers offer the most efficient system to divide flow into twoequal circuits, As opposed to spool type flow dividers that generate heat in a hydraulicsystem IFP AFD flow dividers work at a 98% efficiency with almost no pressuredifferential between P1 inlet pressure & P2 flow divider outlet pressure
AFD flow dividers offer integral differential reliefs at the outlet ports of the AFD flowdivider.The differential reliefs are used to synchronize cylinders and protect the flowdivider from excessive differential pressure. The synchronization is accomplished if oneof the cylinders completes its stroke before the other cylinder P3 pressure will increasecausing a pressure differential between P1 & P3 when pressure differential reaches theadjustment value of the relief valve (P4 = Adjustment 450 PSI) fluid is bled off over theflow divider's internal relief valves to feed the inlet of the flow divider feeding the cylinderthat is late.The differential relief valves also protect the circuit from pressure intensification notallowing the pressure in P3 outlets to rise higher than the main relief adjustment + thepressure adjustment of the differential reliefs P4 (Maximum pressure P3 = P2 Relief pressure + P4 port relief adjustment 450 PSI)
AFD Flow dividerOperating specifications
P4
E7.2
top related