alusic ed.10-2012accessori layout 1 21/01/13 16.39 pagina 1 · 2 .4 È vietata la riproduzione del...
Post on 07-Aug-2020
1 Views
Preview:
TRANSCRIPT
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 1
2
ACCESSORI Alusic significa una vasta gamma di accessori studiati appositamente perprofili in alluminio estruso. Frutto di un’attenta progettazione attraverso sistemidi disegno tridimensionale e testati con l’ausilio delle tecniche di prototipazionerapida (tecnologie entrambe presenti nell’ufficio tecnico interno), gli accessoridel catalogo Alusic sono compatibili con la maggior parte dei profili in alluminiopresenti sul mercato. La gamma disponibile si articola infatti in componentiper cava 6, cava 8 e cava 10 ed è in continua evoluzione, nel tentativo dirispondere in maniera sempre più efficace alle richieste di una clientelasempre più varia, operante nei vari campi della progettazione meccanica.Il continuo ampliamento della gamma di prodotti fa si che all’interno del catalogosiano presenti particolari realizzati attraverso le più disparate tecnologie diproduzione, dallo stampaggio ad iniezione delle materie plastiche, allasinterizzazione di miscele di polveri metalliche, dalla pressofusione dell’alluminio,alla lavorazione dal pieno dello stesso e altre ancora.
ACCESSORIES
Alusic means a large range of accessories appropriately studied for extruded
aluminium profiles. The result of a careful planning through three-dimensional
drawing system and tested thanks to fast prototype technique (both the
technologies present on our internal technical department), the accessories
of Alusic catalogue are compatible with the major part of aluminium profiles
on the market. The available range include in fact slot width 6, slot width 8 and
slot width 10 components and it’s continuously in evolution, in attempt to meet
in an always effective way customers requirements, operating in various fields
of mechanics design. The continuous broadening of the range of products allow
that on the catalogue there are particulars realized through different production
technologies, for example injection molding of plastic materials, sintering of
mixture metallic powders, aluminium die casting, aluminium machining and
further on.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 2
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 3
2 .4 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA
Gli accessori di chiusura Alusic hanno lo scopo di rendere rifinite e gradevolile strutture chiudendo le estremità tagliate dei diversi profili del catalogo. A fianco dei tappi di estremità, la linea di accessori di chiusura si completacon i profili in materiale plastico per le cave, apprezzati soprattutto nell’industriaalimentare grazie alla loro funzionalità durante le operazioni di pulizia eigienizzazione delle strutture.Infine la linea di tappi per la chiusura dei fori e degli esagoni di serraggio delleviti rende le strutture rifinite anche nei dettagli, eliminando anche i più piccolipunti di accumulo di sporco.
GRIPPING ACCESSORIES
Alusic closure accessories have the purpose to make well-finished andpleasant the structures closing the cut extremities of the different profiles ofthe catalogue. Further to the extremities caps, the line of closure accessoriesis completed by plastic profiles for the slots, used in particular in food industrythanks to their functionalities during cleaning and hygiene operations on thestructures.Finally the line of caps for the closure of the holes and tightening hexagon ofthe screws make the structures well-finished also in the details, eliminatingalso the smaller points of dirt heap.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 4
2.5È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
TAPPO PER PROFILO 13x22 - CAP FOR PROFILE 13x22 6
6TAPPO PER PROFILO 13x30 - CAP FOR PROFILE 13x30
TAPPO PER PROFILO 22x22 - CAP FOR PROFILE 22x22 6
084.201.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 13 x 22 - Black polyamide cap 13 x 22
22
2.5
4136
1
084.201.001G Tappo in poliammide grigio 13 x 22 - Grey polyamide cap 13 x 22 1
084.201.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 13 x 30 - Black polyamide cap 13 x 30 1
084.201.002G Tappo in poliammide grigio 13 x 30 - Grey polyamide cap 13 x 30 1
30
132.
54
6
084.201.005
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 22 x 22 - Black polyamide cap 22 x 22 2
084.201.005G Tappo in poliammide grigio 22 x 22 - Grey polyamide cap 22 x 22 2
22.5
22.5
2.5
8
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 5
2.6 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
60
60
2.5
6.5
TAPPO PER PROFILO 30x30 - CAP FOR PROFILE 30x30 6
6TAPPO PER PROFILO 30x60 - CAP FOR PROFILE 30x60
TAPPO PER PROFILO 60x60 - CAP FOR PROFILE 60x60 6
084.201.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 30 x 30 - Black polyamide cap 30 x 30 3
084.201.007G Tappo in poliammide grigio 30 x 30 - Grey polyamide cap 30 x 30 3
084.201.008
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 30 x 60 - Black polyamide cap 30 x 60 5
084.201.008G Tappo in poliammide grigio 30 x 60 - Grey polyamide cap 30 x 60 5
084.201.030
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 60 x 60 - Black polyamide cap 60 x 60 10
084.201.030G Tappo in poliammide grigio 60 x 60 - Grey polyamide cap 60 x 60 10
30
30
2.5
6.5
60
30
2.5
6.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 6
2.7È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
80
802.
510
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
TAPPO PER PROFILO 40x40 - CAP FOR PROFILE 40x40 8
8TAPPO PER PROFILO 40x80 - CAP FOR PROFILE 40x80
TAPPO PER PROFILO 80x80 - CAP FOR PROFILE 80x80 8
084.201.024
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 40 x 40 - Black polyamide cap 40 x 40 5
084.201.024G Tappo in poliammide grigio 40 x 40 - Grey polyamide cap 40 x 40 5
084.201.025
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 40 x 80 - Black polyamide cap 40 x 80 10
084.201.025G Tappo in poliammide grigio 40 x 80 - Grey polyamide cap 40 x 80 10
084.201.026
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 80 x 80 - Black polyamide cap 80 x 80 18
084.201.026G Tappo in poliammide grigio 80 x 80 - Grey polyamide cap 80 x 80 18
40
402.
510
80
402.
510
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 7
2.8 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
TAPPO PER PROFILO 80X80 PESANTE - CAP FOR PROFILE 80X80 HEAVY 8
8TAPPO PER PROFILO 80X120 PESANTE - CAP FOR PROFILE 80X120 HEAVY
084.201.050
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 80 x 80 - Black polyamide cap 80 x 80 18
084.201.050G Tappo in poliammide grigio 80 x 80 - Grey polyamide cap 80 x 80 18
084.201.051
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 80 x 120 - Black polyamide cap 80 x 120 26
084.201.051G Tappo in poliammide grigio 80 x 120 - Grey polyamide cap 80 x 120 26
80
80
2.58
80
120
2.58
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 8
2.9È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
084.201.003
8 18.5
32
2.5
4.8
084.201.0048 18.5
45
2.5
4.8
084.201.006
18.5
45
2.5
9.5
084.201.009
32
2.5
1132
084.201.010
32
2.5
1032
R15
084.201.029
32
2.5
328
4.8
084.201.011
45
322.
510
TAPPO PER PROFILO 18x32 - CAP FOR PROFILE 18x32 8
084.201.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 18 x 32 - Black polyamide cap 18 x 32 2
084.201.003G Tappo in poliammide grigio 18 x 32 - Grey polyamide cap 18 x 32 2
084.201.003
8 18.5
32
2.5
4.8
084.201.004
8 18.5
45
2.5
4.8
084.201.006
18.5
45
2.5
9.5
084.201.009
32
2.5
1132
084.201.010
32
2.5
1032
R15
084.201.029
32
2.5
328
4.8
084.201.011
45
322.
510
8TAPPO PER PROFILO 18x45 - CAP FOR PROFILE 18x45
TAPPO PER PROFILO 18x45 - CAP FOR PROFILE 18x45 8
084.201.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 18 x 45 - Black polyamide cap 18 x 45 2
084.201.004G Tappo in poliammide grigio 18 x 45 - Grey polyamide cap 18 x 45 2
084.201.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 18 x 45 a tre cave Black polyamide 3 slots cap profile 18 x 45
3
084.201.006GTappo in poliammide grigio per profilo 18 x 45 a tre cave
Grey polyamide 3 slots cap profile 18 x 453
084.201.003
8 18.5
32
2.5
4.8
084.201.004
8 18.5
45
2.5
4.8
084.201.006
18.5
45
2.5
9.5
084.201.009
32
2.5
1132
084.201.010
32
2.5
1032
R15
084.201.029
32
2.5
328
4.8
084.201.011
45
322.
510
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 9
2.10 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
TAPPO PER PROFILO 32x32 - CAP FOR PROFILE 32x32 8
084.201.009
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 32 x 32 - Black polyamide cap 32 x 32 3
084.201.009G Tappo in poliammide grigio 32 x 32 - Grey polyamide cap 32 x 32 3
084.201.02390
902.
510
40
402.
510
084.201.024
80
402.
510
084.201.025
084.201.003
8 18.5
32
2.5
4.8
084.201.004
8 18.5
45
2.5
4.8
084.201.006
18.5
45
2.5
9.5
084.201.009
32
2.5
1132
084.201.010
32
2.5
1032
R15
084.201.029
32
2.5
328
4.8
084.201.011
45
322.
510
8TAPPO PER PROFILO 32x32 - CAP FOR PROFILE 32x32
TAPPO PER PROFILO 32x32 - CAP FOR PROFILE 32x32 8
084.201.010
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 32 x 32 tondo Black polyamide cap round profile 32 x 32 3
084.201.010GTappo in poliammide grigio per profilo 32 x 32 tondo
Grey polyamide cap round profile 32 x 32 3
084.201.029
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 32 x 32 a 4 cave Black polyamide 4 slots cap profile 32 x 32 3
084.201.029GTappo in poliammide grigio per profilo 32 x 32 a 4 cave
Grey polyamide 4 slots cap profile 32 x 32 3
084.201.003
8 18.5
32
2.5
4.8
084.201.004
8 18.5
45
2.5
4.8
084.201.00618
.5
45
2.5
9.5
084.201.009
32
2.5
1132
084.201.010
32
2.5
1032
R15
084.201.029
32
2.5
328
4.8
084.201.011
45
322.
510
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 10
2.11È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
TAPPO PER PROFILO 32x45 - CAP FOR PROFILE 32x45 8
084.201.011
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 32 x 45 - Black polyamide cap 32 x 45 5
084.201.011G Tappo in poliammide grigio 32 x 45 - Grey polyamide cap 32 x 45 5
084.201.003
8 18.5
32
2.5
4.8
084.201.004
8 18.5
45
2.5
4.8
084.201.006
18.5
45
2.5
9.5
084.201.009
32
2.5
1132
084.201.010
32
2.5
1032
R15
084.201.029
32
2.5
328
4.8
084.201.011
4532
2.5
10
458
2.5
45
8TAPPO PER PROFILO 45x45 - CAP FOR PROFILE 45x45
TAPPO PER PROFILO 45x45 - CAP FOR PROFILE 45x45 10
084.201.012
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 45 - Black polyamide cap 45 x 45 7
084.201.012G Tappo in poliammide grigio 45 x 45 - Grey polyamide cap 45 x 45 7
084.201.038
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 45 - Black polyamide cap 45 x 45 7
084.201.038G Tappo in poliammide grigio 45 x 45 - Grey polyamide cap 45 x 45 7
45
452.
510
084.201.012
2.5
10
084.201.013
45
45
31.513.5
13.5
31.5
45°
084.201.014
90
18.5
2.5
9.5
180
18.5
2.5
9.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 11
2.12 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
TAPPO PER PROFILO 45x45 - CAP FOR PROFILE 45x45 8
084.201.013
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 45 x 45 angolare Black polyamide cap angular profile 45 x 45
5
084.201.013GTappo in poliammide grigio per profilo 45 x 45 angolare
Grey polyamide cap angular profile 45 x 455
45
452.
510
084.201.0122.
510
084.201.013
45
45
31.513.5
13.5
31.5
45°
084.201.014
90
18.5
2.5
9.5
180
18.5
2.5
9.5
45
452.
510
084.201.012
2.5
10
084.201.013
45
45
31.513.5
13.5
31.5
45°
084.201.014
90
18.5
2.5
9.5
180
18.5
2.5
9.5
8TAPPO PER PROFILO 18x90 - CAP FOR PROFILE 18x90
TAPPO PER PROFILO 18x180 - CAP FOR PROFILE 18x180 8
084.201.014
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 18 x 90 - Black polyamide cap 18 x 90 6
084.201.014G Tappo in poliammide grigio 18 x 90 - Grey polyamide cap 18 x 90 6
084.201.015
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 18 x 180 - Black polyamide cap 18 x 180 10
084.201.015G Tappo in poliammide grigio 18 x 180 - Grey polyamide cap 18 x 180 10
45
452.
510
084.201.012
2.5
10
084.201.013
4545
31.513.5
13.5
31.5
45°
084.201.014
90
18.5
2.5
9.5
180
18.5
2.5
9.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 12
8TAPPO PER PROFILO 45x45 45° - CAP FOR PROFILE 45x45 45°
2.13È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
TAPPO PER PROFILO 45x45 - CAP FOR PROFILE 45x45 8
084.201.017
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 45 x 45 tondo Black polyamide cap round profile 45 x 45
5
084.201.017GTappo in poliammide grigio per profilo 45 x 45 tondo
Gray polyamide cap round profile 45 x 455
084.201.049
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 45 x 45 45° Black polyamide cap round profile 45 x 45 45°
5
084.201.049GTappo in poliammide grigio per profilo 45 x 45 45°
Gray polyamide cap round profile 45 x 45 45°5
120
452.
510
084.201.016
45
452.
510
084.201.017
R32
60
452.
510
084.201.018
90
452.
510
084.201.019 8TAPPO PER PROFILO 45x45 - CAP FOR PROFILE 45x45
2.5
8
084.201.037
45
45
R22.5
ÿ11
6
ÿ6.5
R10
10 10
20
20
812
20
5 15
084.201.037
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero per profilo 45 x 45 corrimano Black polyamide cap handrail profile 45 x 45
5
084.201.037G Tappo in poliammide grigio per profilo 45 x 45 corrimano Grey polyamide cap handrail profile 45 x 45
5
45
45°
2.59.7
5
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 13
2.14 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
TAPPO PER PROFILO 45x90 - CAP FOR PROFILE 45x90 8
084.201.019
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 90 - Black polyamide cap 45 x 90 12
084.201.019G Tappo in poliammide grigio 45 x 90 - Grey polyamide cap 45 x 90 12
90
452,5
10
120
452.
510
084.201.016
45
452.
510
084.201.017
R32
60
452.
510
084.201.018
90
452.
510
084.201.019
TAPPO PER PROFILO 45x60 - CAP FOR PROFILE 45x60 8
084.201.018
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 60 - Black polyamide cap 45 x 60 9
084.201.018G Tappo in poliammide grigio 45 x 60 - Grey polyamide cap 45 x 60 9
10TAPPO PER PROFILO 45x90 - CAP FOR PROFILE 45x90
084.201.039
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 90 - Black polyamide cap 45 x 90 12
084.201.039G Tappo in poliammide grigio 45 x 90 - Grey polyamide cap 45 x 90 12
45
90
82.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 14
2.15È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
120
452.
510
084.201.016
45
452.
510
084.201.017
R32
60
452.
510
084.201.018
90
452.
510
084.201.019
TAPPO PER PROFILO 45x120 - CAP FOR PROFILE 45x120 8
084.201.016
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 120 - Black polyamide cap 45 x 120 15
084.201.016G Tappo in poliammide grigio 45 x 120 - Grey polyamide cap 45 x 120 15
TAPPO PER PROFILO 45x135 - CAP FOR PROFILE 45x135 8
084.201.020
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 135 - Black polyamide cap 45 x 135 17
084.201.020G Tappo in poliammide grigio 45 x 135 - Grey polyamide cap 45 x 135 17
084.201.020
135
452.
510
2.5
10
180
45
084.201.022
8TAPPO PER PROFILO 45x180 - CAP FOR PROFILE 45x180
084.201.022
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 45 x 180 - Black polyamide cap 45 x 180 23
084.201.022G Tappo in poliammide grigio 45 x 180 - Grey polyamide cap 45 x 180 23
084.201.020
135
452.
510
2.5
10
180
45
084.201.022
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.39 Pagina 15
2.16 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
084.201.02390
902.
510
40
402.
510
084.201.024
80
402.
510
084.201.025
TAPPO PER PROFILO 90x90 - CAP FOR PROFILE 90x90 8
084.201.023
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 90 x 90 - Black polyamide cap 90 x 90 22
084.201.023G Tappo in poliammide grigio 90 x 90 - Grey polyamide cap 90 x 90 22
TAPPO PER PROFILO 90x90 - CAP FOR PROFILE 90x90 10
084.201.040
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 90 x 90 - Black polyamide cap 90 x 90 22
084.201.040G Tappo in poliammide grigio 90 x 90 - Grey polyamide cap 90 x 90 22
084.201.02390
902.
510
40
402.
510
084.201.024
80
402.
510
084.201.0258TAPPO PER PROFILO 90x180 - CAP FOR PROFILE 90x180
084.201.027
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo in poliammide nero 90 x 180 - Black polyamide cap 90 x 180 63
084.201.027G Tappo in poliammide grigio 90 x 180 - Grey polyamide cap 90 x 180 63
80
802.
510
084.201.026
084.201.027
180
902.
510
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 16
10
4
35
2.17È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
TAPPINO CHIUDI FORO - GRIPPING CAP 1086
108TAPPINO CHIUDI FORO - GRIPPING CAP
TAPPO CHIUSURA VITE - CLOSING CAP FOR SCREW
084.202.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappino in plastica grigia Ø8 - Plastic cap grey Ø8 1
084.202.002N Tappino in plastica nera Ø8 - Plastic cap black Ø8 1
084.202.005
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappino in plastica grigia Ø13 - Plastic cap grey Ø13
1
084.202.005N Tappino in plastica nera Ø13 - Plastic cap black Ø13 1
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.202.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo vite M6 esagono 4 - Cap screw M6 hexagon 4 1
NNEEWW
7,3
8
10
17
13,8
8,3
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 17
2.18 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
13
5
35,5
6
13
3,56
10
35
5
TAPPO CHIUSURA VITE - CLOSING CAP FOR SCREW
TAPPO CHIUSURA VITE - CLOSING CAP FOR SCREW
TAPPO CHIUSURA VITE - CLOSING CAP FOR SCREW
MATERIALE / MATERIAL: Poliammide - Polyamide
084.202.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo vite M8 esagono 5 - Cap screw M8 hexagon 5 1
084.202.008
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo vite M8 esagono 6 - Cap screw M8 hexagon 6 1
MATERIALE / MATERIAL: Poliammide - Polyamide
MATERIALE / MATERIAL: Poliammide - Polyamide
084.202.009
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo vite M6 esagono 5 - Cap screw M6 hexagon 5 1
NNEEWW
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 18
2.19È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
6PROFILO RIGIDO DI CHIUSURA - RIGID GRIPPING PROFILE
PROFILO RIGIDO DI CHIUSURA - RIGID GRIPPING PROFILE 8
Lunghezza standard 2000 mm - Standard length 2000 mm
A richiesta sono fornibili in altri colori - On request they are supplied in other color
Lunghezza standard 2000 mm - Standard length 2000 mm
A richiesta sono fornibili in altri colori - On request they are supplied in other color
084.203.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Profilo rigido chiusura cava 6 mm - Rigid gripping profile 6 mm 69
MATERIALE / MATERIAL: PVC estruso grigio - Rigid grey PVC
MATERIALE / MATERIAL: PVC rigido nero - Rigid black PVC
084.203.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili standard cava 8 mm - Standard profiles slot 8 mm 176
PROFILO RIGIDO DI CHIUSURA - RIGID GRIPPING PROFILE 8
MATERIALE / MATERIAL: PVC rigido grigio - Rigid grey PVC
084.203.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili standard cava 8 mm - Standard profiles slot 8 mm 176
Lunghezza standard 2000 mm - Standard length 2000 mm
A richiesta sono fornibili in altri colori - On request they are supplied in other color
8
15.5
17.3
8
8
15.5
17.3
8
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 19
2.20 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
8PROFILO RIGIDO DI CHIUSURA - RIGID GRIPPING PROFILE
PROFILO DI CHIUSURA - GRIPPING PROFILE 8
084.203.014
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili cava 8 mm - Profiles slot 8 mm 70
MATERIALE / MATERIAL: PVC rigido grigio - Rigid grey PVC
MATERIALE / MATERIAL: PVC morbido nero - Soft black PVC
084.203.016
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili cava 8 mm - Profiles slot 8 mm 57
Lunghezza standard 2000 mm - Standard length 2000 mm
A richiesta sono fornibili in altri colori - On request they are supplied in other color
Rotoli da 20 m - Rolls 20 m
A richiesta sono fornibili in altri colori - On request they are supplied in other color
PROFILO RIGIDO DI CHIUSURA - RIGID GRIPPING PROFILE 8
Lunghezza standard 2000 mm - Standard length 2000 mm
A richiesta sono fornibili in altri colori - On request they are supplied in other color
MATERIALE / MATERIAL: PVC rigido grigio - Rigid grey PVC
084.203.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili standard serie leggera cava 8 mm - Light series profiles slot 8 mm 202
8
15.5
17.3
8
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 20
2.21È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
S
PROFILO DI CHIUSURA - GRIPPING PROFILE 8
Rotolo da 50 - 100 m - Rolls 50 - 100 m
MATERIALE / MATERIAL: PVC morbido nero - Soft black PVC
084.203.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Profilo chiusura cava - Slot gripping profile 75
PROFILO DI CHIUSURA - GRIPPING PROFILE 8
Rotolo da 50 - 100 m - Rolls 50 - 100 m
MATERIALE / MATERIAL: PVC morbido grigio - Soft grey PVC
084.203.001 G
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Profilo chiusura cava - Slot gripping profile 75
PROFILO DI CHIUSURA - GRIPPING PROFILE 8
MATERIALE / MATERIAL: PVC morbido grigio - Soft grey PVC
084.203.015
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili standard cava 8 mm - Standard profiles slot 8 57
Rotoli da 20 m - Rolls 20 m
A richiesta sono fornibili in altri colori - On request they are supplied in other colorNNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 21
2.22 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
PROFILO CHIUSURA IN ALLUMINIO - ALUMINIUM GRIPPING PROFILE 8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.203.017
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili standard cava 8 mm - Standard profiles slot 8 33
9,5
4
Lunghezza standard 3000 mm - Standard length 3000 mm
PROFILO DI CHIUSURA - GRIPPING PROFILE 10
Rotoli da 50 m - Rolls 50 m
A richiesta sono fornibili in altri colori - On request they are supplied in other color
MATERIALE / MATERIAL: PVC semirigido grigio - Grey semirigid PVC
084.203.010
CODICECODE
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
Per profili standard cava 10 - Profiles slot 10 60
12.3
8
11.5
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 22
2.23È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
8PROFILO APPOGGIAPIEDI - PROFILE FOOT STOOL
084.205.001
084.205.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Profilo appoggiapiedi in gomma - Rubber profile foot stool
Profilo appoggiapiedi in gomma anti UV - Anti UV rubber profile foot stool
228
228
MATERIALE / MATERIAL: PVC morbido nero - Soft black PVC Rotolo da 20 m - Rolls 20 m
PROFILO APPOGGIAPIEDI bOMbATO - PROFILE FOOT STOOL 8
PER PROFILI 45x45 / FOR PROFILES 45x45
MATERIALE / MATERIAL: PVC morbido nero - Soft black PVC Rotolo da 20 m - Rolls 20 m
084.205.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Profili appoggiapiedi bombato in gomma - Rubber profile foot stool 384
PER PROFILI 18x32 - 32x32 - 45x45 / FOR PROFILES 18x32 - 32x32 - 45x45
45
3
1 8
45
11 83
45
8.5
8
16.5
Ediz. 10
®
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
AC
CE
SS
OR
I D
I C
HIU
SU
RA
- G
RIP
PIN
G A
CC
ES
SO
RIE
SCOPRIbASE DI ANCORAGGIO 40X40 45X45 - CAP FOR ANCHOR bASE 40X40 45X45 108
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.207.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
40 x 40 /45 x 45 100
56.5
56.5
140
155
83
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 23
2.24 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI CHIUSURA - GRIPPING ACCESSORIES
Ediz. 10
®
TAPPO PER PIANTONE 45x45 TONDO - CAP FOR PROFILE 45x45 ROUND 8
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.207.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo per piantone 45 x 45 tondo - Cap for profile 45 x 45 round 20
TAPPO PER PIANTONE 45x45 - CAP FOR PROFILE 45x45 108
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.207.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo per piantone 45 x 45 - Cap for profile 45 x 45 20
40
45.5
61
45.561
TAPPO PER PIANTONE 45x45 CORRIMANO - CAP FOR PROFILE 45x45 HANDRAIL 8
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.207.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Tappo per piantone 45 x 45 corrimano - Cap for profile 45 x 45 handrail 20
4058
5845
45
4058
58
45
45
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 24
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 25
2.26 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI FISSAGGIO
Ideali per la gamma di profili Alusic e compatibili con la maggior parte degli altriprofili in commercio, la gamma di viti e dadi del catalogo accessori permette ilfissaggio reciproco tra i vari strutturali e il montaggio dei vari componenti perla realizzazione di ogni tipo di struttura. Parte degli accessori di fissaggio è disponibile sia nella versione standard inacciaio zincato sia nella versione in acciaio inox A2.
CLAMPING ACCESSORIES
The Alusic clamping accessories are ideal for Alusic profiles and compatiblewith the most part of the other profiles on the market, the range of screws andnuts on accessories catalogue allow the fixation between the structural profilesand the assembling of the various components for the realization of any kindof structures.A part of the clamping accessories is available both in the standard version ingalvanized steel and in stainless steel A2.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 26
2.27È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
AC
CE
SS
OR
I D
I FI
SS
AG
GIO
- C
LA
MP
ING
AC
CE
SS
OR
IES
VITE DI FISSAGGIO - CLAMPING SCREW 1086
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Acciaio inox - Stainless steel
084.301.008
084.301.009
084.301.035
084.301.036
084.301.010
084.301.011
084.301.001
084.301.002
084.301.003
084.301.012
084.301.004
084.301.038
084.301.013
084.301.005
084.301.006
084.301.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gsBDAd
Vite - Screw M4 x 12
Vite - Screw M5 x 12
Vite - Screw M5 x 16
Vite - Screw M5 x 20
Vite - Screw M6 x 12
Vite - Screw M6 x 16
Vite - Screw M6 x 20
Vite - Screw M8 x 16
Vite - Screw M8 x 20
Vite - Screw M8 x 22
Vite - Screw M8 x 25
Vite - Screw M8 x 30
Vite - Screw M8 x 35
Vite - Screw M8 x 40
Vite - Screw M8 x 50
Vite - Screw M8 x 60
M4
M5
M5
M5
M6
M6
M6
M8
M8
M8
M8
M8
M8
M8
M8
M8
12
12
16
20
12
16
20
16
20
22
25
30
35
40
50
60
7
8
8
8
10
10
10
13
13
13
13
13
13
13
13
13
2,5
3,5
3,5
3,5
4
4
4
5
5
5
5
5
5
5
5
5
2,5
3
3
3
4
4
4
5
5
5
5
5
5
5
5
5
1
3
3
4
4
5
4
8
10
12
12
15
18
18
20
24
084.301.032
084.301.029
084.301.025
084.301.033
084.301.031
084.301.026
084.301.027
084.301.030
084.301.028
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gsBDAd
Vite - Screw M8 x 12
Vite - Screw M8 x 16
Vite - Screw M8 x 20
Vite - Screw M8 x 25
Vite - Screw M8 x 30
Vite - Screw M8 x 35
Vite - Screw M8 x 40
Vite - Screw M8 x 45
Vite - Screw M8 x 50
M8
M8
M8
M8
M8
M8
M8
M8
M8
13
13
13
13
13
13
13
13
13
12
19
20
25
30
35
40
45
50
8
8
8
8
8
8
8
8
8
6
6
6
6
6
6
6
6
6
8
11
13
15
16
17
20
21
22
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 27
2.28 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
Ediz. 10
®
VITE A MARTELLO - HAMMER SCREW 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
10VITE CAVA 10 - SCREW SLOT 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
M8
9.7
3
19
L
9.7
084.301.018
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Vite a martello - Hammer screw M8x20 13
15
16
20
26
L
20
25
30
40
60
084.301.019 Vite a martello - Hammer screw M8x25
084.301.020 Vite a martello - Hammer screw M8x30
084.301.021 Vite a martello - Hammer screw M8x40
084.301.022 Vite a martello - Hammer screw M8x60
305
35
Ø19
6
084.301.023
084.301.024
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Vite per cava 10 M14 x 35 - Screw for slot 10 M14 x 35
Vite per cava 10 M12 x 35 - Screw for slot 10 M12 x 35
50
45
VITE AUTOFILETTANTE CAVA 10 - AUTOSCREWING SCREW SLOT 10 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.301.037
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Vite per cava 10 S 12 x 35 - Screw for slot 10 S 12 x 35 45
Esagono 6 mm Hexagon 6 mm
Torx T50
NNEEWW
30
19 S12
36
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 28
2.29È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
AC
CE
SS
OR
I D
I FI
SS
AG
GIO
- C
LA
MP
ING
AC
CE
SS
OR
IES
bOCCOLA CAVA 10 - bUSH SLOT 10 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steelL
D d
M816
Ø10.7
Ø9.7
084.312.001
084.312.002
084.312.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Boccola per cava 10 M14/M10Bush for slot 10 M14/M10
Boccola per cava 10 M14/M8Bush for slot 10 M14/M8
Boccola per cava 10 M12/M8Bush for slot 10 M12/M8
20
25
18
bOCCOLA AUTOFILETTANTE CAVA 10 - AUTOSCREWING bUSH SLOT 10 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.312.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Boccola autofilettante profili cava 10/M8, adatto ai profili cava 10 serie leggeraAutoscrewing bush slot 10 profiles M8 suitable for slot 10 light profiles
20
LD
18
24
15
M14 x 1,5
M14 x 2
M12 x 1,5
d
M10
M8
M8
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 29
1086DADO A MARTELLO - HAMMER NUT
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Acciaio inox - Stainless steel
084.302.028
B
A
C
D
B
E
084.302.004
613
13
M8
084.302.009
13
13
M8
6
9021/8X24/A2
Ø8.3
Ø24
2
VITE AUTOFORANTE
8
Ø14
256
31
084.302.021
084.302.022
084.302.023
084.302.024
084.302.025
084.302.026
084.302.027
084.302.028
084.302.029
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gEDCBA
Dado - Nut CAVA 6
Dado - Nut CAVA 8
Dado - Nut CAVA 8
Dado - Nut CAVA 8
Dado - Nut CAVA 10
Dado - Nut CAVA 10
Dado - Nut CAVA 10
Dado - Nut CAVA 10
Dado - Nut CAVA 10
M4
M4
M5
M6
M4
M5
M6
M8
M8
1
1,5
1,5
1,5
3
3
3
3
3
4,2
6
6
6
8,8
8,8
8,8
8,8
8,8
5,7
7,7
7,7
7,7
9,7
9,7
9,7
9,7
9,7
11,5
16
16
16
19
19
19
19
19
1
1
1
1
2
2
2
1
1
2.30 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
Ediz. 10
®
bOCCOLA FILETTATA - THREADED bUSH
L
D
d
084.312.005
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
L
Boccola filettata per creazione di fori filettati su profili chiusi
Threaded bush suitable to make threaded holes on closed profile
14
D
9
d
M6 2
084.312.007 Boccola filettata per creazione di fori filettati su profili chiusi
Threaded bush suitable to make threaded holes on closed profile
11,57 M5 2
084.312.006 Boccola filettata per creazione di fori filettati su profili chiusi
Threaded bush suitable to make threaded holes on closed profile
16,511 M8 4
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 30
2.31È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
AC
CE
SS
OR
I D
I FI
SS
AG
GIO
- C
LA
MP
ING
AC
CE
SS
OR
IES
DADO QUADRO CAVA 6 - SQUARE NUT SLOT 6 6
8DADO QUADRO CAVA 8 - SQUARE NUT SLOT 8
DADO CON MOLLA DI POSIZIONAMENTO - NUT WITH POSITIONING SPRING 8
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
084.302.013
084.302.014
084.302.015
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gD
Dado - Nut M4
Dado - Nut M5
Dado - Nut M6
M4
M5
M6
2
2
2
084.302.001
084.302.002
084.302.003
084.302.004
084.302.037
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gD
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio inox - Stainless steel nut
M4
M5
M6
M8
M8
3
3
3
3
3
084.302.006
084.302.007
084.302.008
084.302.009
084.302.038
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
D
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio zincato - Galvanized steel nut
Dado Acciaio inox - Stainless steel nut
6
5
5
4
4
M4
M5
M6
M8
M8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 31
2.32 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
DADO RETTANGOLARE - RECTANGULAR NUT 8
084.302.017
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gAD
Dado - Nut 13x180 180M8 60
Forniti senza grani - Supplied without grain
8DADO RETTANGOLARE - RECTANGULAR NUT
DADO RETTANGOLARE - RECTANGULAR NUT 8
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
084.302.042
084.302.010
084.302.011
084.302.012
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gAD
Dado - Nut 13x20
Dado - Nut 13x20
Dado - Nut 13x25
Dado - Nut 13x40
20
20
25
40
M6
M8
M8
M8
14
13
13
20
Forniti senza grani - Supplied without grainA== 6
13
D
084.302.010/011/012 084.302.016
18 45 18
8113
D
6
6
084.302.017
45 45 45
D
13
22.5
180
22.5
084.302.016
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gAD
Dado - Nut 13x81 81M8 40
Forniti senza grani - Supplied without grain
A== 6
13
D
084.302.010/011/012 084.302.016
18 45 18
81
13
D
6
6
084.302.017
45 45 45
D
13
22.5
180
22.5
A== 6
13
D
084.302.010/011/012 084.302.016
18 45 18
81
13
D
6
6
084.302.017
45 45 45
D
1313
22.5
180
22.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 32
2.33È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
10DADO QUADRO CAVA 10 - SQUARE NUT SLOT 10
DADO A CULLA CON MOLLA - ROLL-IN NUT WITH SPRING 8
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
AC
CE
SS
OR
I D
I FI
SS
AG
GIO
- C
LA
MP
ING
AC
CE
SS
OR
IES
084.302.043
084.302.044
084.302.045
084.302.046
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gD
Dado M4 - Nut M4
Dado M5 - Nut M5
Dado M6 - Nut M6
Dado M8 - Nut M8
M4
M5
M6
M8
22
21
20
19
20
19,5
9,8 5,1
10,6
D
13,5
227,
2
0,8
D
7,8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.302.047
084.302.048
084.302.049
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gD
Dado M5 - Nut M5
Dado M6 - Nut M6
Dado M8 - Nut M8
M5
M6
M8
12
11
10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
NNEEWW
NNEEWW
DADO FLANGIATO - FLANGED NUT 108
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
Ø21
8
SW13
M8
084.302.036
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Dado flangiato - Flanged nut M8 2
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 33
2.34 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
8RONDELLA CAVA 6 - WASHER SLOT 6
RONDELLA CAVA 8 - WASHER SLOT 8 8
ACCESSORI DI FISSAGGIO - CLAMPING ACCESSORIES
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.303.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Rondella quadra - Square washer 10x10 1
084.303.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Rondella quadra - Square washer 13x13 1
RONDELLA CAVA 10 - WASHER SLOT 10 10
084.303.004
084.303.005
CODICECODE
DESCRIZIONEDESCRIPTION
D PESO gWEIGHT g
Rondella quadra 19x19 per cava 10 leggeroSquare washer 19x19 for light slot 10
Rondella quadra 19x19 per cava 10 standard Square washer 19x19 for standard slot 10
1
1
12,5
14,5
19
19
2
�D
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 34
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 35
2.36 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI GIUNZIONE
Si tratta di una delle gamme più ampie di accessori del catalogo Alusic com-prendente componenti adatti a tutte le varie serie di profili cava 6, cava 8 ecava 10. All’interno di questa gamma di accessori si trovano tutti i componentiper la realizzazione di giunzioni fisse, mobili o semplicemente regolabili in fun-zione delle esigenze del cliente finale.La scelta del componente più adatto può avvenire proprio in funzione di que-sto aspetto oppure in funzione della quantità e della semplicità maggiore ominore delle lavorazioni richieste per il montaggio.
JOINT ACCESSORIES
This is one of the most wide range of accessories on Alusic catalogue, it in-cludes components right for all the various series of profiles slot 6, slot 8 andslot 10. Between this range of accessories could be found all the componentsfor the realization of fixed, mobiles junctions or adjustable depending on theneeds of the end user.The choice of the most suitable accessory can be done in function of thisaspect or in function of the workings need for the assembling.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 36
15M5
129
12
2.37È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
DISPOSITIVO ANTIROTAZIONE - ANTIROTATION DEVICE 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.303.006
CODICECODE
COPPIA TORSIONETORSION COUPLE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
25 NmDispositivo antirotazione da applicare sulle viti di fissaggioAntirotation device suitable for fixing screw
4
16
30
13.3 8
FISSAGGIO A NOTTOLINO - PAWL CLAMPING 6
MATERIALE / MATERIAL: Alluminio/Acciaio zincato - Aluminium/Galvanized steel
084.306.010
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Nottolino fornito dotato di vite M5 x 20 e dado M5 cava 6Pawl supplied with screw M5 x 20 and square nut slot 6 - M5
25
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 37
2.38 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
FISSAGGIO A NOTTOLINO - PAWL CLAMPING 8
FISSAGGIO A NOTTOLINO - PAWL CLAMPING 8
M8
13 1620
27
MATERIALE / MATERIAL: Alluminio/Acciaio zincato - Aluminium/Galvanized steel
084.306.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Nottolino fornito dotato di vite M6 x 25 e dado M6 cava 8Pawl supplied with screw M6 x 25 and square nut slot 8 - M6
30
MATERIALE / MATERIAL: Alluminio/Acciaio zincato - Aluminium/Galvanized steel
084.306.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Nottolino fornito dotato di vite M8 x 40 e dado M8 cava 8Pawl supplied with screw M8 x 40 and square nut slot 8 - M8
50
1615M
613
12
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 38
2.39È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
Ediz. 10
®
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
FISSAGGIO A NOTTOLINO - PAWL CLAMPING 10
10FISSAGGIO A NOTTOLINO - PAWL CLAMPING
TAPPO RACCORDO CENTRALE - CAP FOR CENTRAL CONNECTION 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Nylon nero - Black nylon
084.306.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Raccordo centrale con testa verticale per profilo cava 10 standardCentral connection with vertical head suitable for slot 10 standard profile
49
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.306.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Raccordo centrale con testa orizzontale per profilo cava 10 standardCentral connection with orizontal head suitable for slot 10 standard profile
49
31
52
5,5
19
Ø 15
Ø10
SW6
9,7
31
52
5.5
19
Ø 15
Ø10
SW6
9.71.
5
Ø6.4
L
Ø17
084.306.005
084.306.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
L
Tappo per raccordo centrale - Cap for central connection
Tappo per raccordo centrale - Cap for central connection
1
1
17
12
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 39
2.40 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
22.5Ø 16,8
19,5
5,5
45,5
SW6
9,9
22.5Ø 16,8
19,5
5,5
45,5
SW6
9,9
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
FISSAGGIO A NOTTOLINO - PAWL CLAMPING 10
FISSAGGIO A NOTTOLINO - PAWL CLAMPING 10
RACCORDO A 90° IN CAVA - SLOT 90° CONNECTION 10
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
5,4
59,5
19,5
084.306.013
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Raccordo in cava per giunzioni ortogonaliSlot joint for orthogonal connection
39
22.5Ø16.8
19.5
45.5
6
22.5Ø16.8
19.5
45.5
6
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.306.008
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Raccordo centrale con testa verticale per profilo cava 10 leggeroCentral connection with vertical head suitable for slot 10 light profile
49
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.306.009
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Raccordo centrale con testa orizzontale per profilo cava 10 leggeroCentral connection with horizontal head suitable for slot 10 light profile
49
Ediz. 10
®
NNEEWW
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 40
M8
1620
22.5 22.5
2.41È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
NOTTOLINO M5 PER GIUNZIONI LINEARI - PAWL CLAMPING M5 FOR LINEAR JOINT 6
8NOTTOLINO M8 PER GIUNZIONI LINEARI - PAWL CLAMPING M8 FOR LINEAR JOINT
MATERIALE / MATERIAL: Alluminio/Acciaio zincato - Aluminium/Galvanized steel
084.306.011
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Giunzione lineare realizzata per mezzo di fissaggio a nottilini. Ideale per giunzioni sottoposte a forti trazioni
Linear joint made by pawl clamping.
Suitable for connection under high traction load
30
084.306.012
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Giunzione lineare realizzata per mezzo di fissaggio a nottilini. Ideale per giunzioni sottoposte a forti trazioni
Linear joint made by pawl clamping.
Suitable for connection under high traction load
50
1512
12
M5
12
Ediz. 10
®
NNEEWW
NNEEWW
MATERIALE / MATERIAL: Alluminio/Acciaio zincato - Aluminium/Galvanized steel
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 41
2.42 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO ANGOLARE 30° - ANGULAR JOINT 30° 6
GIUNTO ANGOLARE 45° - ANGULAR JOINT 45° 6
6
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.021
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M6Completed of 4 grains M6
28
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.019
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M6Completed of 4 grains M6
26
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.020
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M6Completed of 4 grains M6
26
Ediz. 10
®
==10
10 25
25
10
4
084.307.019
30°
50
50
==10
10 25
25
10
084.307.02045°
4
M6
50
50
==10
10 25
25
10
4
084.307.019
30°
50
50
==10
10 25
25
10
084.307.020
45°
4
M6
50
50
GIUNTO ANGOLARE 60° - ANGULAR JOINT 60°
==10
10 25
25
10 60°
084.307.021
4
M6
50
50
==10
10 20
2010
084.307.022
4 M6
50
5090°
60°
30°
15°
30°45°
22.5°
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 42
2.43È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO ANGOLARE 90° - ANGULAR JOINT 90° 6
8GIUNTO ANGOLARE 30° - ANGULAR JOINT 30°
GIUNTO ANGOLARE 45° - ANGULAR JOINT 45° 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.022
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M6 - Completed of 4 grains M6 22
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8 - Completed of 4 grains M8 54
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8 - Completed of 4 grains M8
Ediz. 10
®
==10
10 25
25
10 60°
084.307.021
4
M6
50
50
==10
10 20
2010
084.307.022
4 M6
50
5090°
45°
90°
50
50
==13
.5
12.5 25
25
12.5
6
M8
084.307.001
30°
50
50
==13
.5
12.5 25
25
12.5
6
M8
084.307.002
45°
15°
30°
56
50
50
==13
.5
12.5 25
25
12.5
6
M8
084.307.001
30°
50
50
==13
.5
12.5 25
25
12.5
6
M8
084.307.002
45° 45°
22.5°
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 43
2.44 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO ANGOLARE 60° - ANGULAR JOINT 60° 8
GIUNTO ANGOLARE 90° - ANGULAR JOINT 90° 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8Completed of 4 grains M8
58
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8Completed of 4 grains M8
58
Ediz. 10
®
50
50
==13
.5
12.5 25
25
12.5
60°
6
M8
084.307.003
==13
.5
12.5 25
2512
.5
6
M8
084.307.004
50
50
90°
60°
30°
50
50
==13
.5
12.5 25
25
12.5
60°
6
M8
084.307.003
==13
.5
12.5 25
2512
.5
6
M8
084.307.004
50
50
90°
45°
90°
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 44
2.45È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO LINEARE 60 mm - LINEAR JOINT 60 mm 6
6GIUNTO LINEARE 120 mm - LINEAR JOINT 120 mm
GIUNTO LINEARE 90 mm - LINEAR JOINT 90 mm 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.016
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 2 grani M6 - Completed of 2 grains M6 - L.60 mm 23
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.017
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8 - Completed of 4 grains M8 46
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.005
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 2 grani M8 - Completed of 2 grains M8 - L.90 mm
Ediz. 10
®
60
15 156030
10
4 2
6,1
6
30 15120
30
10
4 2
6,1
6
15 30
22.5 45 22.5
8.213.4
9059
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 45
2.46 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO LINEARE 180 mm - LINEAR JOINT 180 mm 8
GIUNTO LINEARE 90 mm - LINEAR JOINT 90 mm 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8Completed of 4 grains M8
124
MATERIALE / MATERIAL: Alluminio anodizzato/Acciaio inox - Anodized aluminium/Stainless steel
084.307.026
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8Completed of 4 grains M8
58
Ediz. 10
®
GIUNTO LINEARE 180 mm - LINEAR JOINT 180 mm 8
MATERIALE / MATERIAL: Alluminio anodizzato/Acciaio inox - Anodized aluminium/Stainless steel
084.307.027
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 2 grani M8 - Completed of 2 grains M8 - L.90 mm 60
4522.5 45 45 22.5
8.213.4
18059
22.5 45 22.5
8.213.4
9059
4522.5 45 45 22.5
8.213.4
18059
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.40 Pagina 46
2.47È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO LINEARE 90 mm - LINEAR JOINT 90 mm 10
10GIUNTO LINEARE 180 mm - LINEAR JOINT 180 mm
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.024
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 2 grani M8 - Completed of 2 grains M8 80
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.025
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8 - Completed of 4 grains M8 160
Ediz. 10
®
4522.5 22.5
90
10.2
4 4
8
19.5
084.105.101
45
180
10.2
4 4
8
19.5
084.105.102
4522.5 45 22.5
4522.5 22.5
90
10.2
4 4
8
19.5
084.105.101
45
180
10.2
4 4
8
19.5
084.105.102
4522.5 45 22.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 47
2.48 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
PIASTRA DI GIUNZIONE - CLAMPING PLATE 10
PIASTRA DI GIUNZIONE - CLAMPING PLATE 10
8
8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.710.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastra giunzione profili a 2 fori profili 40x40 - 45x45Joint plate for profile with 2 holes 40x40 / 45x45 profile
88
MATERIALE / MATERIAL: Acciaio inox - Stainless steel
084.106.174
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastra giunzione profili a 2 fori profili 40x40 - 45x45Joint plate for profile with 2 holes 40x40 / 45x45 profile
88
Ediz. 10
®
160
20 40 40 40 20
804020
20
180
22.5 45 45 45 22.5
904522
.522
.5
Ø9
084.710.003
Ø9
084.710.001
6 6
14.5 11 29 11 14.5
2020
40
94
084.710.002
160
20 40 40 40 20
804020
20
180
22.5 45 45 45 22.5
904522
.522
.5
Ø9
084.710.003
Ø9
084.710.001
6 6
14.5 11 29 11 14.5
2020
40
9
4
084.710.002
PIASTRA DI GIUNZIONE - CLAMPING PLATE 108
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.710.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastra giunzione profili a 3 fori profili 40x40 - 45x45Joint plate for profile with 3 holes 40x40 / 45x45 profile
132
11 11 1114.5 29 29 14.5
120
9
2020
40
160
20 40 40 40 20
804020
20
180
22.5 45 45 45 22.5
904522
.522
.5Ø9
084.710.003
Ø9
084.710.001
6 6
14.5 11 29 11 14.5
2020
40
9
4
084.710.002
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 48
2.49È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
PIASTRA DI GIUNZIONE - CLAMPING PLATE 8
108PIASTRA DI GIUNZIONE - CLAMPING PLATE
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.710.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastra di giunzione per profilo profili 40x80 - 80x80Joint plate for profile 40x80 / 80x80 profiles
730
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.710.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastra di giunzione per profilo profili 45x90 - 90x90Joint plate for profile 45x90 / 90x90 profiles
730
Ediz. 10
®
160
20 40 40 40 20
804020
20
180
22.5 45 45 45 22.5
904522
.522
.5
Ø9
084.710.003
Ø9
084.710.001
6 6
14.5 11 29 11 14.5
2020
40
9
4
084.710.002
160
20 40 40 40 20
804020
20
180
22.5 45 45 45 22.5
90904522
.522
.5
Ø9
084.710.003
Ø9
084.710.001
6 6
14.5 11 29 11 14.5
2020
40
9
4
084.710.002
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 49
2.50 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO CENTRALE SNODATO ANGOLO VARIAbILE - CENTRAL ARTICULATED JOINT 6
GIUNTO CENTRALE SNODATO ANGOLO VARIAbILE - CENTRAL ARTICULATED JOINT 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.011
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M6Completed of 4 grains M6
21
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8Completed of 4 grains M8
59
Ediz. 10
®
GIUNTO CENTRALE SNODATO ANGOLO VARIAbILE - CENTRAL ARTICULATED JOINT 6
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.012
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M6 - Completed of 4 grains M6 24
a
a/2
a
a/2
a
a/2
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 50
2.51È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO CENTRALE SNODATO ANGOLO VARIAbILE - CENTRAL ARTICULATED JOINT 8
8GIUNTO INTERNO SNODATO - INTERNAL ARTICULATED JOINT
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.008
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 4 grani M8 - Completed of 4 grains M8 55
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.010
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di 2 grani M6x6 - Completed of 2 grains M6x6 25
Ediz. 10
®
a
a/2
GIUNTO INTERNO FISSAGGIO ORTOGONALE - INTERNAL JOINT ORTHOGONAL CLAMPING 6
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.013
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di vite e grano - Completed of screw and grain 21
30.5 30.5
M6
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 51
2.52 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO INTERNO FISSAGGIO ORTOGONALE - INTERNAL JOINT ORTHOGONAL CLAMPING 8
GIUNTO PER FISSAGGIO PERPENDICOLARE - PERPENDICULAR CLAMPING JOINT 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.009
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di vite e granoCompleted of screw and grain
37
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.015
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di viti per il montaggioCompleted with screws for assembly
40
Ediz. 10
®
GIUNTO ORTOGONALE - ORTHOGONAL JOINT 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.018
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Completo di vite e granoCompleted with screw and grain
28
89.1
30
16
M8
M8
13.3
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 52
2.53È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
Ediz. 10
®
CONNETTORE CON PERNO PASSANTE - bOLT CONNECTOR 10
10CONNETTORE CON PERNO PASSANTE - bOLT CONNECTOR
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.031
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Connettore con perno passante adatto a profili 45 x 45 cava 10Bolt connector suitable for 45 x 45 slot 10 profiles
75
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.032
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Connettore con perno passante adatto a profili 45 x 90 o 90 x 90 cava 10Bolt connector suitable for 45 x 90 or 90 x 90 slot 10 profiles
130
42
�16.9
16.8
19
27.6
10.2
NNEEWW
87
16.819
7310.3
�16.9
NNEEWW
Foratura D17 mmHole D17 mm
Foratura D17 mmHole D17 mm
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 53
2.54 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO UNIONE PROFILO SERIE 40 - UNION JOINT PROFILE SERIES 40 8
GIUNTO UNIONE PROFILO SERIE 45 - UNION JOINT PROFILE SERIES 45 8
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.028
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Permette di giuntare profili con qualunque angolazioneAllows you to splice profiles with any angle
50
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.307.029
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Permette di giuntare profili con qualunque angolazioneAllows you to splice profiles with any angle
50
Ediz. 10
®
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 54
2.55È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO A 45° PER GIUNZIONE PROFILO - 45° CONNECTION FOR JOINT PROFILE 8
8GIUNTO A 45° PER GIUNZIONE PROFILO - 45° CONNECTION FOR JOINT PROFILE
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
Ediz. 10
®
084.304.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di grani e perni per il montaggio
Complete of grains and pins for the assembly
18 x 32 40
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.304.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di grani e perni per il montaggio
Complete of grains and pins for the assembly
32 x 32 70
8GIUNTO A 45° PER GIUNZIONE PROFILO - 45° CONNECTION FOR JOINT PROFILE
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.304.004
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di grani e perni per il montaggio
Complete of grains and pins for the assembly
32 x 32 tondo
32 x 32 round
65
8
9.522.5
32
8
9.5
22.5 32
38
45°
R18
R50
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 55
2.56 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO A 45° PER GIUNZIONE PROFILO - 45° CONNECTION FOR JOINT PROFILE
GIUNTO QUADRO - CUbE CONNECTION 6
Ediz. 10
®
45
R60
R15
45°
46
8
22,522,5
22,5
22,5
8
8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.304.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di grani e perni per il montaggio
Complete of grains and pins for the assembly
45 x 45 90
6GIUNTO QUADRO - CUbE CONNECTION
6.55 15.9522.5
6.55
15.9
522.5
Ø10
Ø6.6
Ø6.
6
Ø10
22.5
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
Ø10
Ø6.6
Ø6.
6
Ø10
1530
15
1515
30
084.310.007
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 2 vie - completo di tappi in plasticaCube joint 2 way - complete of plastic caps
30 x 30 60
084.310.004
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 2 vie - completo di tappi in plasticaCube joint 2 way - complete of plastic caps
22,5 x 22,5 20
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 56
2.57È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO QUADRO - CUbE CONNECTION 6
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
Ediz. 10
®
GIUNTO QUADRO - CUbE CONNECTION 6
8GIUNTO QUADRO - CUbE CONNECTION
MATERIALE / MATERIAL: Alluminio - Aluminium
084.310.018
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 2 vie - completo di tappi in plasticaCube joint 2 way - complete of plastic caps
40 x 40 115
084.310.005
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 3 vie - completo di tappi in plasticaCube joint 3 way - complete of plastic caps
30 x 30 60
084.310.006
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 3 vie - completo di tappi in plasticaCube joint 3 way - complete of plastic caps
22,5 x 22,5 20
40
40
40
�8.5
6.55 15.95 22.5
6.55
15.9
522.5
Ø10
Ø6.6
Ø6.
6
Ø10
22.5
6.55 15.9522.5
6.55
15.9
522
.5
6.55 15.95 22.5
6.55
15.9
522.5
Ø10
Ø6.6
Ø6.
6
Ø10
22.5
6.55 15.9522.5
6.55
15.9
522
.5
15 15
30
15 15
30
1515
30
Ø6.
6
Ø10
15 15
30
15 15
30
1515
30
Ø6.
6
Ø10
NNEEWW
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 57
2.58 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO QUADRO - CUbE CONNECTION
GIUNTO QUADRO - CUbE CONNECTION 10
Ediz. 10
®
40 4040
8
MATERIALE / MATERIAL: Alluminio - Aluminium
10GIUNTO QUADRO - CUbE CONNECTION
4545
45
4545
45
NNEEWW
NNEEWW
NNEEWW
MATERIALE / MATERIAL: Alluminio - Aluminium
084.310.021
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 3 vie - completo di tappi in plasticaCube joint 3 way - complete of plastic caps
45x45 cava 10 leggero45x45 slot 10 light
152
MATERIALE / MATERIAL: Alluminio - Aluminium
084.310.019
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 3 vie - completo di tappi in plasticaCube joint 3 way - complete of plastic caps
40 x 40 95
084.310.020
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto quadro a 2 vie - completo di tappi in plasticaCube joint 2 way - complete of plastic caps
45x45 cava 10 leggero45x45 slot 10 light
170
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 58
2.59È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNZIONE PER PROFILO TONDO - JOINT FOR ROUND PROFILE 8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
Ediz. 10
®
084.310.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di grani e perni Complete of grains and pins
32 x 32(Tondo Round cod. 084.101.010)
75
GIUNZIONE PER PROFILO TONDO - JOINT FOR ROUND PROFILE 8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
8GIUNTO PER PROFILO 18x32 - CONNECTION 18x32 PROFILE
084.310.017
084.310.017G
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto 2 vie in poliammide nero per angoli 90° Fornito con viti di fissaggio
2 way connection black polyamide for 90° joint. Supplied with screws
Giunto 2 vie in poliammide grigio per angoli 90° Fornito con viti di fissaggio
2 way connection grey polyamide for 90° joint. Supplied with screws
18 x 32
18 x 32
35
35
NNEEWW
45 x 45(Tondo Round cod. 084.101.017)
084.310.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di grani e perni Complete of grains and pins
170
32
32
Ø8,5
Ø 8,5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 59
2.60 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO PROFILO CORRIMANO - HANDRAIL PROFILE JOINT
GIUNTO PROFILO CORRIMANO - HANDRAIL PROFILE JOINT 8
Ediz. 10
®
8
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
Adatto anche per la realizzazione di cornici. Suitable also for frames
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.310.009
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Completo di vitiComplete of screws
45 x 45(Corrimano Handrail cod. 084.101.037)
60
8CORPO GIUNTO A TRE VIE - 3 WAYS bODY CONNECTION
MATERIALE / MATERIAL: Zama - Zamak
084.310.013
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Corpo giunto a 3 vie, completo di vitiBody 3 ways connection. Supplied with screws
45 x 45 140NNEEWW
45
45 45
R45
084.310.010
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
45 x 45(Corrimano Handrail
Cod. 084.101.037)
80Giunto profilo corrimano percambi di direzione. Completo di viti
Direction changing joint.Complete of screws
45 45
45 45
R22.5
R32
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 60
2.61È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
TAPPO TONDO GIUNTO A TRE VIE - ROUNDED CAP JOINT 3 WAYS
Ediz. 10
®
TAPPO QUADRO GIUNTO A TRE VIE - SQUARE CAP JOINT 3 WAYS
TAPPO 45° ANGOLARE GIUNTO A TRE VIE - ANGULAR 45° CAP JOINT 3 WAYS
MATERIALE / MATERIAL: Poliammide - Polyamide
084.310.014
084.310.014G
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Tappo tondo giunto 3 vie - colore nero Rounded cap joint 3 ways - black color
Tappo tondo giunto 3 vie - colore grigio Rounded cap joint 3 ways - gray color
9
9
MATERIALE / MATERIAL: Poliammide - Polyamide
084.310.015
084.310.015G
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Tappo quadro giunto 3 vie - colore nero Square cap joint 3 ways - black color
Tappo quadro giunto 3 vie - colore grigio Square cap joint 3 ways - gray color
14
14
MATERIALE / MATERIAL: Poliammide - Polyamide
084.310.016
084.310.016G
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Tappo 45° angolare giunto 3 vie - colore nero Angular 45° cap joint 3 ways - black color
Tappo 45° angolare giunto 3 vie - colore grigio Angular 45° cap joint 3 ways - gray color
9
9
NNEEWW
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 61
2.62 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
GIUNTO SNODATO A VITE - SCREW ARTICULATED JOINT
GIUNTO SNODATO A VITE - SCREW ARTICULATED JOINT 8
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
Ediz. 10
®
6
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
084.311.009
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto snodato con sistema antirotazione orientabile Articulated joint with adjusrable anti-rotation device
30 x 30 55
30
15
45
30
084.311.010
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto snodato con sistema antirotazione orientabile Articulated joint with adjusrable anti-rotation device
40 x 40 146
65
4020 40
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 62
084.311.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Impiegato per il collegamento dei profilati con qualsiasi angolazione (max 90°)
Connecting profiles in every direction within 90°
45 x 45 230
2.63È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
Ediz. 10
®
8GIUNTO SNODATO FRIZIONAbILE A VITE - ARTICULATED JOINT WITH RUbbING SCREW
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
GIUNTO SNODATO A VITE - SCREW ARTICULATED JOINT 8
084.311.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Impiegato per il collegamento dei profilati con qualsiasi angolazione (max 90°)
Connecting profiles in every direction within 90°
45 x 45 210
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
084.311.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Impiegato per il collegamento dei profilati con qualsiasi angolazione (max 90°)
Connecting profiles in every direction within 90°
45 x 45 240
8GIUNTO SNODATO SERRAGGIO A LEVA - ARTICULATED JOINT LEVER CLAMPING
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 63
100
89,6 44,8
2.64 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
Ediz. 10
®
108GIUNTO SNODATO A VITE - SCREW ARTICULATED JOINT
MATERIALE / MATERIAL: Zama - Zamak
084.311.012
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto snodato con sistema antirotazione orientabile Articulated joint with adjusrable anti-rotation device
45 x 90 1120NNEEWW
GIUNTO SNODATO A VITE - SCREW ARTICULATED JOINT 8
084.311.011
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Giunto snodato con sistema antirotazione orientabile Articulated joint with adjusrable anti-rotation device
40 x 80 997NNEEWW
79,6
100
39.8
MATERIALE / MATERIAL: Zama - Zamak
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 64
2.65È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
6
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
Ediz. 10
®
084.305.006
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
13 x 22 mm, montaggio con viti M6x1213 x 22 mm, assembling with M6x12 screws
6
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.305.007
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
27,5 x 59 mm, montaggio con viti M6x1227,5 x 59 mm, assembling with M6x12 screws
46
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.305.010
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
29 x 29 mm, montaggio con viti M6x1629 x 29 mm, assembling with M6x16 screws
29
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 6
6ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
715
715
15
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 65
2.66 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 1086
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
Ediz. 10
®
6
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
108ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
084.305.008
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
59 x 59 mm, montaggio con viti M6x1259 x 59 mm, assembling with M6x12 screws
93
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
084.305.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
18 x 40 mm, montaggio con viti M618 x 40 mm, assembling with M6 screws
20
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
923
11
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
356.157.000
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
18 x 40 mm, montaggio con viti M818 x 40 mm, assembling with M8 screws
20
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 66
2.67È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
108
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
Ediz. 10
®
084.305.002
CODICECODE
PESO gWEIGHT g
TIPO DI PROFILOTYPE OF PROFILE
25 x 40 mm, montaggio con viti M8x2025 x 40 mm, assembling with M8x20 screws
40
MATERIALE / MATERIAL: Acciaio inox - Stainless steel
084.305.016
CODICECODE
PESO gWEIGHT g
TIPO DI PROFILOTYPE OF PROFILE
30 x 30 mm, montaggio con viti M8x1630 x 30 mm, assembling with M8x16 screws
23
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 8
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
NNEEWW
9
1010
15 15
30
30
30
2
9
10 10
1515
30
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 67
2.68 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 8
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
Ediz. 10
®
108
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
8ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
084.305.009
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Per profili serie 40 / 38 x 38 mm - Montaggio con viti M8 x 20 For profile series 40 / 38 x 38 mm - Assembling with M8 x 20
50
084.305.024
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Angolare di fissaggio 40 x 80 mm - Montaggio con viti M8 x 20Clamping angle 40 x 80 mm - Assembling with M8 x 20
115
084.305.022
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Angolare di fissaggio 80 x 80 mm - Montaggio con viti M8 x 20 Clamping angle 80 x 80 mm - Assembling with M8 x 20
234
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 68
2.69È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
8
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
Ediz. 10
®
084.305.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
43 x 43 mm cava 8 - Montaggio con viti M8 x 20slot 8 - Assembling with M8 x 20
60
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.305.025
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
42 x 42 mm con dentini antirotazione - Montaggio con viti M8 x 2042 x 42 mm with antirotation teeth - Assembling with M8 x 20
56
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.305.021
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
43 x 43 mm cava 10 - Montaggio con viti M8 x 20slot 10 - Assembling with M8 x 20
60
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 8
10ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
9.342
8
41.3
41.3
43
43
43
2110
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 69
43
86
86 8
9
NNEEWW
2.70 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 108
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
Ediz. 10
®
10
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
8ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
084.305.026
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
42 x 42 mm con dentini antirotazione - Montaggio con viti M8 x 20 42 x 42 mm with antirotation teeth - Assembling with M8 x 20
56
084.305.004
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
43 x 87 mm - Montaggio con viti M8 x 2043 x 87 mm - Assembling with M8 x 20
170
084.305.027
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
43 x 86 mm con dentini antirotazione - Montaggio con viti M8 x 20 43 x 86 mm with antirotation teeth - Assembling with M8 x 20
162
9.342
10
41.3
41.3
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
NNEEWW
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 70
88
86
9 9
845
45
NNEEWW
2.71È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
10
Ediz. 10
®
084.305.028
CODICECODE
PESO gWEIGHT g
TIPO DI PROFILOTYPE OF PROFILE
42 x 42 mm con dentini antirotazione - Montaggio con viti M8 x 20 42 x 42 mm with antirotation teeth - Assembling with M8 x 20
162
084.305.005
CODICECODE
PESO gWEIGHT g
TIPO DI PROFILOTYPE OF PROFILE
87 x 87 mm - Montaggio con viti M8 x 2087 x 87 mm - Assembling with M8 x 20
350
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.305.029
CODICECODE
PESO gWEIGHT g
TIPO DI PROFILOTYPE OF PROFILE
86 x 86 mm con dentini antirotazione86 x 86 mm with antirotation teeth - Assembling with M8 x 20
334
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES 108
8ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
15
22
5
13
Ø7
084.305.006 084.305.007
59 27
10
88
7
22
5
084.305.010
29 29
8
7
157.
5
084.305.008
30
5959
5
7
157
1515
356.157.000
8 18
22.5
Ø9Ø14
084.305.001
7
40 18
22.57
Ø7
084.305.002
40 25
7
9
17.5
9.5
084.305.003
43 43
7
9
2311
084.305.004
87 43
Ø9
22.5
2322
.5
8
084.305.005
458787
8
22.5
2322
.5
Ø9
084.305.009
38 38
8
9
2015
43
86
86 10
9
NNEEWWMATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 71
88
86
9 9
1045
45
NNEEWW
2.72 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
Ediz. 10
®
10
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.305.030
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
86 x 86 mm con dentini antirotazione - Montaggio con viti M8 x 2086 x 86 mm with antirotation teeth - Assembling with M8 x 20
334
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 72
2.73È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
108
Ediz. 10
®
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.206.004
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Tappo per angolari 084.305.025 - 084.305.026Angles cap for 084.305.025 - 084.305.026
14
TAPPI PER ANGOLARI - ANGLES CAPS 108
108TAPPI PER ANGOLARI - ANGLES CAPS
TAPPI PER ANGOLARI - ANGLES CAPS
42.2
084.206.001
084.206.002
084.206.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gBA
18 x 40 - 084.305.001
25 x 40 - 084.305.002
43 x 43- 084.305.003 - 084.305.021
18
25
43
40
40
43
3
4
7
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.206.001G
084.206.002G
084.206.003G
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gBA
18 x 40 - 084.305.001
25 x 40 - 084.305.002
43 x 43 - 084.305.003 - 084.305.021
18
25
43
40
40
43
3
4
7
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 73
87.6
NNEEWW
2.74 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
TAPPI PER ANGOLARI - ANGLES CAPS
TAPPI PER ANGOLARI - ANGLES CAPS 10
Ediz. 10
®
10
8
8
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.206.005
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Tappo per angolari 084.305.027 - 084.305.028Angles cap for 084.305.027 - 084.305.028
34
084.206.006
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Tappo per angolari 084.305.029 - 084.305.030Angles cap for 084.305.029 - 084.305.030
30
43
NNEEWW
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 74
45°
37.8
NNEEWW
2.75È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
8
MATERIALE / MATERIAL: Zinco pressofuso - Die-cast zinc
Ediz. 10
®
084.305.011
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Per il collegamento di profili 40 x 40 a 45°To join profile 40 x 40 with an angle of 45°
210
084.305.018
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Per il collegamento di profili 40 x 80 a 45°To join profile 40 x 80 with an angle of 45°
350
MATERIALE / MATERIAL: Alluminio\acciaio - Aluminium\steel
084.307.030
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Connettore a 45° per traverse senza necessità di lavorazione45° connector for reinforcement without any mechanical operation
65
ANGOLARE DI RACCORDO - JOINT ANGLE 8
10CONNETTORE A 45° - 45° CONNECTOR
ANGOLARE DI RACCORDO - JOINT ANGLE
80
85
5
Ø 8,2
38,5
40
21,5
NNEEWW
4052
45°
40
8
8
10
Ø8.5
Ø9
MATERIALE / MATERIAL: Zinco pressofuso - Die-cast zinc
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 75
A A
= =
26.5 9.259.25
22.5 22.5
45
22.5
22.5
45
Ø14
M8
Ø9
6
10
2.76 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
PIASTRA DI FISSAGGIO - CLAMPING PLATE
PIASTRA DI FISSAGGIO - CLAMPING PLATE 8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
Ediz. 10
®
8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.308.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo 40 x 40 mm - Profile 40 x 40 mm 40
084.308.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo 45 x 45 mm - Profile 45 x 45 mm 45
NNEEWW
PIASTRA DI FISSAGGIO - CLAMPING PLATE 8
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.537.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo 45 x 45 mm - Profile 45 x 45 mm 45
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.41 Pagina 76
8PIASTRA DI FISSAGGIO - CLAMPING PLATE
2.77È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.308.004
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo 40 x 80 mm - Profile 40 x 80 mm 80
AC
CE
SS
OR
I D
I G
IUN
ZIO
NE
- JO
INT
AC
CE
SS
OR
IES
ACCESSORI DI GIUNZIONE - JOINT ACCESSORIES
Ediz. 10
®
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
084.308.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo 45 x 90 mm - Profile 45 x 90 mm 85
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
084.308.005
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo 60 x 60 mm - Profile 60 x 60 mm 92
PIASTRA DI FISSAGGIO - CLAMPING PLATE 8
6PIASTRA DI FISSAGGIO - CLAMPING PLATE
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 77
NOTE - NOTESEdiz. 10
®
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 78
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 79
2.80 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI SOSTEGNO
La linea di accessori di sostegno Alusic offre un’ampia scelta di soluzioniper l’installazione e il fissaggio a terra di strutture, protezioni perimetrali etrasportatori di qualunque tipo. Particolarmente ampia è la serie di basi diancoraggio che permette un rapido e sicuro staffaggio di elementi strutturalidi qualunque tipo.
SUPPORT ACCESSORIES
The line of support accessories Alusic offers a wide range of solutions for theinstallation and the fixation on the ground of structures, perimetral protectionsand conveyors of any types. In particular the series of anchoring base is verydeveloped, this range allows a fast and sure clamping of structural elementsof different types.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 80
2.81È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I S
OS
TE
GN
O -
SU
PP
OR
T A
CC
ES
SO
RIE
S
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
1086
Ediz. 10
®
MATERIALE / MATERIAL: Alluminio - Aluminium
FLANGIA FISSAGGIO PIEDINI E RUOTE - FEET CLAMPING FLANGE AND WHEELS
084.405.003
084.405.005
084.405.010
084.405.013
084.405.001
084.405.011
084.405.004
084.405.007
084.405.015
084.405.016
084.536.001
CODICECODE
PESO gWEIGHT g
60
80
90
90
90
90
90
90
90
90
30
40
45
45
45
45
45
45
45
45
8
12
12
12
12
12
12
12
12
10
M12
M16
M10
M12
M16
M20
1/4”
3/8”
1/2”
cieca / closed
6,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
8,5
34
80
85
84
83
80
120
114
110
100
12
A B C D d
Guarnizione di tenuta - Sealing plate
Profilo per distribuzione aria compressa Compressed air distribution profile
= =
A
==
B
B
D
d
C
CODICE A B C D d
084.405.003 60 30 8 M12 6,5
084.405.005 80 40 12 M16 8,5
084.405.010 90 45 12 M10 8,5
084.405.013 90 45 12 M12 8,5
084.405.001 90 45 12 M16 8,5
084.405.011 90 45 12 M20 8,5
084.405.007 90 45 12 3/8" 8,5
PESO g
34
80
83
80
85
84
084.405.004 90 45 12 1/4" 8,5 88
85
= =
A
==
A
B
B
d
D
C
65
65
M6CODICE A B C D d
084.405.006 80 40 15 M16 8,5
084.405.002 90 45 15 M16 8,5
084.405.012 90 45 15 M20 8,5
PESO g
234
303
296
90
45
Ø8.5 Ø18
Ø8.5
22.5 45 22.5
45 45
22.5
22.5
3
084.536.001084.536.001
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 81
2.82 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
RINFORZO ANGOLARE - ANGULAR STIFFENING
Ediz. 10
®
MATERIALE / MATERIAL: Alluminio - Aluminium
1086FLANGIA FISSAGGIO PIEDINI E RUOTE - FEET CLAMPING FLANGE AND WHEELS
084.405.014
084.405.006
084.405.002
084.405.012
CODICECODE
PESO gWEIGHT g
60
80
90
90
30
40
45
45
10
15
15
15
M16
M16
M16
M20
6,5
6,5
8,5
8,5
90
234
303
296
A B C D d
= =
A
==
B
B
D
d
C
CODICE A B C D d
084.405.003 60 30 8 M12 6,5
084.405.005 80 40 12 M16 8,5
084.405.010 90 45 12 M10 8,5
084.405.013 90 45 12 M12 8,5
084.405.001 90 45 12 M16 8,5
084.405.011 90 45 12 M20 8,5
084.405.007 90 45 12 3/8" 8,5
PESO g
34
80
83
80
85
84
084.405.004 90 45 12 1/4" 8,5 88
85
= =
A
==
A
B
B
d
D
C
65
65
M6CODICE A B C D d
084.405.006 80 40 15 M16 8,5
084.405.002 90 45 15 M16 8,5
084.405.012 90 45 15 M20 8,5
PESO g
234
303
296
MATERIALE / MATERIAL: Poliammide rinforzato nero - Black reinforced polyamide
108TRIPIEDE DI SOSTEGNO - SUPPORT TRIPOD
084.408.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Adatto al fissaggio di piedi snodati M16 su profili 45 x 45Suitable for articulated M16 feet on 45 x 45 profiles
984
45x4
5
Ø430
Ø80
100 85
185
M16
8
084.406.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Da fissare alla struttura con 2 viti M8 x 40 e due dadi M8Adatto al rinforzo di strutture e per il fissaggio di piedi snodati M16Fix it to the frame with 2 M8 x 40 screws and 2 M8 nuts. Suitable
for angular reinforcement and fixation of M16 articulated feet
720
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 82
2.83È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I S
OS
TE
GN
O -
SU
PP
OR
T A
CC
ES
SO
RIE
S
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
6
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
Ediz. 10
®
084.409.006
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Staffa 30 mm - Bracket 30 mm 173
STAFFA DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bRACkET 8
108ANGOLARI DI FISSAGGIO - CLAMPING ANGLES
STAFFA DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bRACkET
084.409.007
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Staffa 40 mm - Bracket 40 mm 40 x 40 / 40 x 80
TIPO DI PROFILOTYPE OF PROFILE
30 x 30
242
084.409.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
TIPO DI PROFILOTYPE OF PROFILE
Staffa 45 mm - Bracket 45 mm Tutti - All 303
160
15 20 25 20
45
75
22
11
60°
160
13 23.5 22 23.5
40
58°
75
22
9
160
13 23.5 22 23.5
30
75
22
9
58°
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 83
2.84 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
PIEDI SNODATI FISSAbILI - ARTICULATED FIXAbLE FEET 8
Ediz. 10
®
MATERIALE / MATERIAL: Base in poliammide rinforzata nera, stelo in acciaio zincatoPolyamide base black strengthened, galvanized steel stem
86PIEDI SNODATI ANTIVIbRANTI - ARTICULATED VIbRATION - DAMPING FEET
MATERIALE / MATERIAL: Base in poliammide rinforzata nera, stelo in acciaio zincatoPolyamide base black strengthened, galvanized steel stem
MATERIALE / MATERIAL: Gomma sintetica antiolio nera - Black synthetic antioil rubber
86ANTIVIbRANTI - VIbRATION-DAMPING ELEMENTS
084.403.001
084.403.002
084.403.003
084.403.004
CODICECODE
PESO gWEIGHT g
Ø BASEØ BASE
40
50
80
100
6
12
36
63
084.402.001
084.402.002
084.402.003
084.402.004
084.402.005
084.402.006
CODICECODE
PORTATA kgLOAD kg
PESO gWEIGHT gC E F Ch.BAdD
1000
1000
1000
1000
2200
2200
80
80
80
80
100
100
M8
M10
M12
M16
M16
M20
74
101
96
97
195
130
29
31
33
37
40
44
45
70
63
60
155
86
54
54
54
54
74
74
9
9
9
9
10,5
10,5
6
8
10
13
13
17
53
75
88
141
293
303
084.401.004
084.401.001
084.401.002
084.401.003
CODICECODE
PORTATA kgLOAD kg
PESO gWEIGHT gCh.CBAdD
450
900
900
900
40
40
50
50
M6
M8
M8
M10
65
68
88
95
18
23
23
25
47
45
65
70
–
6
6
8
26
29
39
55
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 84
83
Ø60
Ø12
Ø40
24
60
60
45
45
83
Ø6024
Ø60
83
Ø40
24
Ø12
2.85È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I S
OS
TE
GN
O -
SU
PP
OR
T A
CC
ES
SO
RIE
S
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
RUOTA GIREVOLE - CASTOR
084.404.001
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio a vite centrale Castor with central screw fixation
50 228
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
084.404.006
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio a flangia Castor with flange fixation
50 330
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
084.404.003
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio a vite centrale e freno Castor with central screw fixation and brake
50 330
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
RUOTA GIREVOLE - CASTOR
RUOTA GIREVOLE CON FRENO - CASTOR WITH bRAkE
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 85
60
60
45
45
Ø6024
83
2.86 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
RUOTA GIREVOLE CON FRENO - CASTOR WITH bRAkE
RUOTA FISSA - FIXED WHEEL
NNEEWW
NNEEWW60
60
45
45
Ø6024
83
084.404.008
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio a flangia e freno Castor with flange fixation and brake
50 400
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
084.404.007
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota fissa con fissaggio a flangia Fixed wheel with flange fixation
50 260
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 86
60
60
45
45
Ø10
0 121
24
60
60
45
45
121
24 Ø100
60
6045
121
24 Ø100
2.87È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I S
OS
TE
GN
O -
SU
PP
OR
T A
CC
ES
SO
RIE
S
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
RUOTA GIREVOLE - CASTOR
RUOTA GIREVOLE CON FRENO - CASTOR WITH bRAkE
RUOTA FISSA - FIXED WHEEL
NNEEWW
084.404.002
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio a flangiaCastor with flange fixation
55 427
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
084.404.004
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio a flangia e freno Castor with flange fixation and brake
55 487
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
084.404.009
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota fissa con fissaggio a flangia Fixed wheel with flange fixation
55 400
Supporto ruote in acciaio cromato, ruote in gommaChromium steel wheels support, rubber wheels
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 87
2.88 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
RUOTA GIREVOLE - CASTOR
NNEEWW
Ø125
177
356
35
73
M16
084.404.005
CODICECODE
DESCRIZIONEDESCRIPTION
PORTATA kgPESO g
WEIGHT g
Ruota girevole con fissaggio con perno M16 e frenoCastor with M16 pin and brake
180 1.500
Supporto ruota e perno in acciaio inox, ruota in gomma e dado conico in alluminio anodizzatoStainless steel support, rubber wheel and cone nut in anodized aluminium
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 88
8
bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE 8
8
2.89È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I S
OS
TE
GN
O -
SU
PP
OR
T A
CC
ES
SO
RIE
S
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
084.410.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio in acciaio per il fissaggio di profili 32 x 32Anchor base in painted steel suitable to fix 32 x 32 profiles
773
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
084.410.005
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio in acciaio per il fissaggio di profili 32 x 45Anchor base in painted steel suitable to fix 32 x 45 profiles
790
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio per il fissaggio di profili 40 x 40Anchor base suitable to fix 40 x 40 profiles
661
MATERIALE / MATERIAL: Acciaio pressofuso sabbiato - Sandblasted die cast aluminium
bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
Ø12
Ø12
0
Ø96
946
100
1545
Ø9
32
45
105
10
55
90
135
40
084.409.004
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 89
2.90 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
105
10
55
90
135
45
108
8bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
10bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio per il fissaggio di profili 45 x 45Anchor base suitable to fix 45 x 45 profiles
562
MATERIALE / MATERIAL: Acciaio pressofuso sabbiato - Sandblasted die cast aluminium
084.409.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio in due pezzi per il fissaggio di profili 45 x 90Two-pieces anchor base suitable to fix 45 x 90 profiles
672
MATERIALE / MATERIAL: Acciaio pressofuso sabbiato - Sandblasted die cast aluminium
084.409.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio in due pezzi per il fissaggio di profili 40 x 80Two-pieces anchor base suitable to fix 40 x 80 profiles
800
MATERIALE / MATERIAL: Acciaio pressofuso sabbiato - Sandblasted die cast aluminium
084.409.005
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 90
2.91È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
108
AC
CE
SS
OR
I D
I S
OS
TE
GN
O -
SU
PP
OR
T A
CC
ES
SO
RIE
S
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
90
165
170
5 125160
82
�12
82 160
125
�12
8
bASE DI ANCORAGGIO A PAVIMENTO - FLOOR ANCHOR bASE
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio per il fissaggio di profili 80 x 80Anchor base suitable to fix 80 x 80 profiles
2.360
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
084.410.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Base di ancoraggio per il fissaggio di profili 90 x 90Anchor base suitable to fix 90 x 90 profiles
2.364
MATERIALE / MATERIAL: Acciaio verniciato grigio - Grey painted steel
084.410.003
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 91
2.92 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
FERMO PER CARRELLO - TROLLEY END STOP
ACCESSORI DI SOSTEGNO - SUPPORT ACCESSORIES
Ediz. 10
®
511.011.001R
511.011.001b
511.011.001V
511.011.001G
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Fermo per carrello rosso - Trolley end stop red
Fermo per carrello blu - Trolley end stop blue
Fermo per carrello verde - Trolley end stop green
Fermo per carrello giallo - Trolley end stop yellow
69
69
69
69
150
30
30150
15MATERIALE / MATERIAL: Poliammide - Polyamide
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 92
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 93
2.94 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ACCESSORI DI FINITURA
Tutti gli accessori Alusic per il completamento delle strutture realizzate conprofili strutturali in alluminio sono raccolti all’interno della sezione accessoridi finitura. All’interno di questa categoria sono raccolti, ad esempio, tutti icomponenti per la costruzione di sportelli apribili, scorrevoli o sollevabilioppure per la realizzazione di pannelli di protezione fissi e asportabili.Completano la gamma le guarnizioni in gomma e i tamponamenti per larealizzazione di pareti di qualunque tipo e i pratici profili multiuso in materialeplastico.
FINISHING ACCESSORIES
All the accessories Alusic for the completion of the structures carried out withaluminum structural profiles are included on the section finishing accessories.In this category are included, for example, all the components for the con-struction of opening, sliding and lifting doors or the realization of safety fixedor removable panels.To complete the range there are the rubber packing and panels to carry outany kind of walls and practical plastic multiuse profiles.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 94
2.95È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
86
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
Sistema di rilevamento interruttore di sicurezzaSafety switch detection system
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
084.407.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Kit di fissaggio pannelli recinzioni con chiusura rapidaed espulsori di sicurezza. Brevettatokit fixing panels with rapid locking
and security expellers. Patent
331
8ANCORAGGIO RAPIDO PER PANNELLI - FAST PANELS ANCHORING
kIT FISSAGGIO PANNELLI CON SICUREZZA - kIT FIXING PANELS WITH SECURITY
084.407.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Completo di boccola - Bushing completed 47
65 45
27.51821.5
6885
1821.536.5
65 45
27.51821.5
6885
1821.536.5
BREVETTATO
PATENT
APERTURA: ruotare in senso antiorarioOPENING: turn anticlockwise
NUOVO SISTEMA DI CHIUSURA MIGLIORATOIMPROVED DETECTION SYSTEM
CHIUSURA: ruotare in senso orarioLOCkING: turn clockwise
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 95
2.96 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE 8
Ediz. 10
®
86
084.503.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inoxFissaggio con viti autofilettanti o M5 x 20
Anodized aluminium with stainless steel pinFixing with self-threading or M5 x 20 screws
49
084.502.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio Inox Aisi 303 Ø 5Fissaggio con viti M6 x 20
Anodized aluminium with Inox Aisi 303 pin Ø 5Fixing with screws M6 x 20
55
084.502.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio Inox Aisi 303 Ø 5Fissaggio con viti M6 x 20
Anodized aluminium with Inox Aisi 303 pin Ø 5Fixing with screws M6 x 20
70
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
8CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
18.5 32
18.532
3 3232
30
3030 30
30
20
4040
80
2515
25
7.5
3688
11
Ø7
18.5 32
18.532
132
084.502.001
18.5
32
32
14532
32
4590
084.502.002
45
32
4590
45
32
4590
1
084.502.003
20 33 46
11
Ø7
4040
80
8
257.5
1525
7.5
83350
18.5 32
18.532
132
084.502.001
18.5
18.5
3232
32
14532
32
4590
084.502.002
45
32
4590
45
32
4590
1
084.502.003
20 33 46
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 96
2.97È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE 86
86CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
084.502.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio Inox Aisi 303 Ø 5Fissaggio con viti M6 x 20
Anodized aluminium with Inox Aisi 303 pin Ø 5Fixing with screws M6 x 20
86
084.503.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox - Cerniera mobile+ cerniera fissa - Fissaggio con viti autofilettanti o M5 x 20
Anodized aluminium with stainless steel pin - mobile hinge +
fixed hinge - Fixing with self-threading or M5 x 20 screws
75
084.503.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox - Cerniera mobile+ cerniera fissa - Fissaggio con viti autofilettanti o M5 x 20
Anodized aluminium with stainless steel pin - mobile hinge +
fixed hinge - Fixing with self-threading or M5 x 20 screws
85
18.5 32
18.532
132
084.502.001
18.5
32
32
14532
32
4590
084.502.002
45
32
4590
45
32
4590
1
084.502.003
20 33 46
11
Ø7
4040
80
8
257.5
1525
7.5
84662
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 97
2.98 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE 86
Ediz. 10
®
86CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
86CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
32
4590
18.532
33
45321
4040
80
2020
2010
10
21
44
11.5 11.5
Ø6.67
18,5
32
18,5
32
2
32
21
084.500.001/004
18,5
32
32
2
4532
3432
45
90084.500.002/005
47
45
32
45
90
45
32
45
90
2
084.500.003/006
4040
80
2020
2010
10
3462
11.5 16.5
Ø6.67
18,5
32
18,5
32
2
32
21
084.500.001/004
18,5
32
32
2
4532
34
32
45
90
084.500.002/005
47
45
32
45
90
45
32
45
90
2
084.500.003/006
084.500.008
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio zincato Ø 8Fissaggio con viti M6 testa cilindrica esagono incassato
Anodized aluminium with galvanized steel pin Ø 8Fixing with screws M6 with emscddedb hexagon
107
084.500.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio Inox Ø 8Fissaggio con viti M6 x 20
Anodized aluminium with galvanized steel pin Ø 8Fixing with screws M6 x 20
71
084.500.002
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 x 20
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 x 20
85
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 98
18,5
32
18,5
32
2
32
21
084.500.001/004
18,5
32
32
2
4532
34
32
45
90
084.500.002/005
47
45
32
45
90
45
32
45
90
2
084.500.003/006
18,5
32
18,5
32
2
32
21
084.500.001/004
18,5
32
32
2
4532
34
32
45
90
084.500.002/005
47
45
32
45
90
45
32
45
90
2
084.500.003/006
2.99È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
86
Ediz. 10
®
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE 86
86CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
4040
80
2020
2010
10
4780
16.5 16.5
Ø6.67
Ø6.67
21
44
11.5
5510
35.5
100.
5
1055
35.5
11.5
18,5
32
18,5
32
2
32
21
084.500.001/004
18,5
32
32
2
4532
3432
45
90084.500.002/005
47
45
32
45
90
45
32
45
90
2
084.500.003/006
Ø6.67
5510
35.5
6020
.25
20.2
5
100.
5
6062
084.500.005
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 x 20
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 x 20
146
084.500.004
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 x 20
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 x 20
111
084.500.003
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 x 20
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 x 20
99
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 99
2.100 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE 86
Ediz. 10
®
86CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
Ø77
4780
60100.
520
.25
20.2
5
6020
.25
20.2
5
18,5
32
18,5
32
2
32
21
084.500.001/004
18,5
32
32
2
4532
34
32
45
90
084.500.002/005
47
45
32
45
90
45
32
45
90
2
084.500.003/006
6,7
32
113
76
33 47 33
1252
12
4515
,515
,5
NNEEWW
084.500.006
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 x 20
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 x 20
180
084.500.009
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8 - Fissaggio con viti M6 x 20 - Utilizzabile per fissare sportelli su piantone centrale unico
Anodized aluminium with inox steel pin Ø 8 - Fixing with screws M6 x 20 - Suitable to fix doors on common central post
152
29.3
26.8
22.8
22.8
16.3 29
.3
32
455
45
32
16.3
4590
45
45
45 5
8040
40
540
90
45
45 5
30
30 30
5
32
32 5 32
32
60
30
90
45 4545
45
4545
90
45
084.500.013
084.500.010
084.500.011 084.500.012
084.500.012
084.500.014
084.500.009
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 100
4040
81
15,21
1020
2120
10
45
5R7
45
81
11,2
1020
2120
10
4040
5R7
4040
81
15,21
1020
2120
10
45
5R7
2.101È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE 8
86CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
CERNIERA IN ALLUMINIO - ALUMINIUM HINGE
45
81
2020
2110
10
8,7
R7 5
4040
45
81
2020
2110
10
8,7
R7 5
4040
45
81
11,2
1020
2120
10
4040
5R7
NNEEWW
NNEEWW
NNEEWW
084.500.010
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 testa svasata per profili serie 45
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 flared head for 45 series profiles
85
084.500.011
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8Fissaggio con viti M6 testa svasata per profili serie 40
Anodized aluminium with inox steel pin Ø 8Fixing with screws M6 flared head for 40 series profiles
85
084.500.012
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8 - Fissaggio conviti M6 testa svasata per profili serie 30 o 32x32 4 cave
Anodized aluminium with inox steel pin Ø 8 - Fixing with screws M6 flared head for 30 series profiles or 32x32 - 4 slots
85
29.3
26.8
22.8
22.8
16.3 29
.3
32
455
45
32
16.3
4590
45
45
45 5
8040
40
540
90
45
45 5
30
30 30
5
32
32 5 32
32
60
30
90
45 4545
45
4545
90
45
084.500.013
084.500.010
084.500.011 084.500.012
084.500.012
084.500.014
084.500.009
29.3
26.8
22.8
22.8
16.3 29
.3
32
455
45
32
16.3
4590
45
45
45 5
8040
40
540
90
45
45 5
30
30 30
5
32
32 5 32
32
60
30
90
45 4545
45
4545
90
45
084.500.013
084.500.010
084.500.011 084.500.012
084.500.012
084.500.014
084.500.009
29.3
26.8
22.8
22.8
16.3 29
.3
32
455
45
32
16.3
4590
45
45
45 5
8040
40
540
90
45
45 5
30
30 30
5
32
32 5 32
32
60
30
90
45 4545
45
4545
90
45
084.500.013
084.500.010
084.500.011 084.500.012
084.500.012
084.500.014
084.500.009
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 101
4040
81
8,71
21,71
45
1020
2120
10
R7 5
2.102 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FInIShIng ACCESSORIES
cernierA in ALLuMiniO - ALuMInIuM hIngE 8
ediz. 10
®
8cernierA in ALLuMiniO - ALuMInIuM hIngE
MATERIALE / MATERIAL: Poliammide nero con perno inox - Black polyamide with inox pin
86cernierA in POLiAMMiDe - POLYAMIDE hIngE
084.501.001
084.501.008
084.501.009
084.501.010
CODICECODE
TIPO DI PROFILOTYPE OF PROFILE
FISSAGGIO CON VITECLAMPING WITH SCREW
PESO gWEIGHT g
18 x 32 / 32 x 32
30 x 30
40 x 40
45 x 45
M4 x 20
M5 x 20
M6 x 20
M8 x 20
38,5
50
70
70
39,5
50
50
50
25
30
40
46
25
30
30
30
9,5
8,5
8,5
8,5
4,5
5,5
6,5
8,5
14
32
40
39
A B C D E F
NNEEWW
NNEEWW
45
4040
81
1020
2120
10
21,71
5R7
45
4040
81
1020
2120
10
21,71
5R7
084.500.013
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8 - Fissaggio conviti M6 testa svasata per profili serie 45 con lato da 32 mm
Anodized aluminium with inox steel pin Ø 8 - Fixing with screws M6 flared head for 45 series profiles with 32 mm width
85
084.500.014
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Alluminio anodizzato con perno in acciaio inox Ø 8 - Fissaggio conviti M6 testa svasata per profili serie 45 con porta di spessore 32 mm
Anodized aluminium with inox steel pin Ø 8 - Fixing with screws M6 flared head for 45 series profiles with doors 32 mm width
85
29.3
26.8
22.8
22.8
16.3 29
.3
32
455
45
32
16.3
4590
45
45
45 5
8040
40
540
90
45
45 5
30
30 30
5
32
32 5 32
32
60
30
90
45 4545
45
4545
90
45
084.500.013
084.500.010
084.500.011 084.500.012
084.500.012
084.500.014
084.500.009
29.3
26.8
22.8
22.8
16.3 29
.3
32
455
45
32
16.3
4590
45
45
45 5
8040
40
540
9045
45 5
30
30 30
5
32
32 5 32
32
6030
90
45 4545
45
4545
90
45
084.500.013
084.500.010
084.500.011 084.500.012
084.500.012
084.500.014
084.500.009
ALUSIC ed.10-2012ACCESSORI_Layout 1 22/01/13 17.27 Pagina 102
2.103È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIn
ISh
Ing
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FInIShIng ACCESSORIES
ediz. 10
®
MAnigLiA A POnte - bRIDgE hAnDLE
MAnigLiA A POnte - bRIDgE hAnDLE
MAnigLiA A POnte - bRIDgE hAnDLE
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
MATERIALE / MATERIAL: Poliammide grigia - Grey polyamide
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.504.001
084.504.002
084.504.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT gdDCBA
Aperta - Open
Aperta - Open
Aperta - Open
109
129
145
93,5
112
128,5
21
28
28
38
45
45
6,5
8,5
8,5
26
34
37
084.505.001
084.505.002
084.505.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Aperta - Open
Chiusa - Close
Coprimaniglia - Handle covering
44
53
8
084.506.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Aperta con inserti arancioni - Open with orange inserts 29
ALUSIC ed.10-2012ACCESSORI_Layout 1 22/01/13 17.27 Pagina 103
2.104 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
MANIGLIA A MOLLA - SPRING HANDLE
Ediz. 10
®
MANIGLIA A PONTE - bRIDGE HANDLE
NNEEWW
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.506.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Chiusa con inserti arancioni - Close with orange inserts 46
MATERIALE / MATERIAL: Alluminio anodizzato e poliammide nero - Anodized aluminium and black polyamide
084.506.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Maniglia a molla adatta per la chiusura con aggancio di sportelli scorrevoliSpring handle suitable to close sliding doors
185
95
20 20
115
35
40
Ø6.5
60
90
35.5
43
59
106
100
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 104
2.105È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
86
Ediz. 10
®
SCROCCHETTO A MOLLA - SPRING LATCH 86
86SCROCCHETTO A MOLLA - SPRING LATCH
SCROCCHETTO CHIUDIANTA - LATCH
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.517.001
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Impiegato per la chiusura delle portecon apertura a sgancio manualeUsed for doors clossing with
manual release opening
N. 1 Scrocchetto
Latch sx + dx
34
Ø4.3
55 38
20
Ø4.3
5038
20
084.518.001
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Scrocchetto per la chiusura di portecon apertura a sgancio manuale
Latch for the closure of doors thatopen with manual unhooking
Completo di piastrina per ilriscontro e viti per il fissaggio
Supplied with stopplate and fixing screws
20
084.518.002
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Scrocchetto per la chiusura di portecon apertura a sgancio manuale
Latch for the closure of doors thatopen with manual unhooking
33
Ø4.5
38 2838 28
Ø4.5
9.5
1913
32
11 29
Ø4.5
3550
Ø4.59.5
50 35
40
Completo di piastrina per ilriscontro e viti per il fissaggio
Supplied with stopplate and fixing screws
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.42 Pagina 105
2.106 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
CLIPS FERMAPORTE - DOORS-STOP CLIPS 86
Ediz. 10
®
86
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Ottone - Brass
MATERIALE / MATERIAL: Nylon rinforzato - Fibreglass reinforced nylon
1086FERMAPORTA A CALAMITA - MAGNET DOOR-STOP
084.519.001
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Serratura per il bloccaggio disportelli e pannelli
Sloock for fixing of panels
Completo di chiave universale
Supplied with universal key
190
SERRATURA A CHIAVE PER PORTE - LOCk FOR SWING DOORS
18
M8M
18
91
084.519.002
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Impiegato per la ritenutadi porte e sportelli, ecc.
Used for doors, flap doors, etc.
Completo di piastra di appoggio
Supplied with support plate
39
084.525.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Fermaporte asolato completo di magnete e piastra di appoggio
Door-stop with magnet with button hole
37
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 106
2.107È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
6
Ediz. 10
®
MAGNETE - MAGNET
FERMAPORTA - DOOR-STOP
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
1086
084.522.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Fermaporta - Door-stop 11
108FERMAPORTA - DOOR-STOP
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
084.522.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Fermaporta asolato - Door-stop with button hole 27
084.523.001
CODICECODE
DESCRIZIONEDESCRIPTION
FORZA DI ATTRAZIONEFORCE OF ATTRACTION
PESO gWEIGHT g
Magnete M18 - Magnet M18 50 N 52
M 18 x 0.75
26,5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 107
2.108 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
AGGANCIO A CLIPS - CLIP DOOR-STOP 1086
Ediz. 10
®
108
MATERIALE / MATERIAL: Alluminio sabbiato - Sandblasted aluminium
FERMAPORTA CON MAGNETE - DOOR-STOP WITH MAGNET
084.524.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Fermaporta asolato completo di magneteDoor-stop with magnet with button hole
70
084.523.002
084.523.003
CODICECODE
MATERIALEMATERIAL
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Gomma termoplastica - Rubber thermoplastic
Acciaio zincatoGalvanized steel
Clips
Perno di riscontroCheck-pin
4
5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 108
2.109È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
bLOCCHETTO FERMAVETRI - GLASS STOP WITH WASHER
MATERIALE / MATERIAL: Alluminio pressofuso sabbiato - Sandblasted and die-cast aluminium
86
8bLOCCHETTO FISSAGGIO RAPIDO - QUICk FIXING bLOCk
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.507.001
CODICECODE
SPESSORE PANNELLIPANELS THICkNESS
PESO gWEIGHT g
0 ÷ 8 mm 10
bLOCCHETTO DI FISSAGGIO REGOLAbILE - ADJUSTAbLE FIXING bLOCk
29 7 5
22
8.5
3.5
M6
123.5
084.508.001
CODICECODE
DESCRIZIONEDESCRIPTION
SPESSORE PANNELLIPANELS THICkNESS
PESO gWEIGHT g
Blocchetto da inserire direttamente nellacava del profilato per il fissaggio di pannelli
Fixing for blocking panel. Suitable to fix it directly into slot
1 ÷ 5 mm 7
084.509.001
084.509.002
CODICECODE
DESCRIZIONEDESCRIPTION
SPESSORE PANNELLIPANELS THICkNESS
PESO gWEIGHT g
Fermavetro - Glass stop
Rondella - Washer1 ÷ 8 mm
4
1
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
6.5
6.513
18
30
612
Ø4.5
Ø4
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 109
2.110 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
86
MATERIALE / MATERIAL: Zinco pressofuso - Die-cast zinc
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
DISTANZIALE - SPACER 8
MORSETTO PANNELLO IN VETRO - GLASS PANEL STOP
32.5
Ø19.5
9 20
25
13.5
Ø5.5
32.5
Ø19.5
9 20
25
13.5
Ø5.5
084.509.003
CODICECODE
DESCRIZIONEDESCRIPTION
SPESSORE PANNELLIPANELS THICkNESS
PESO gWEIGHT g
Completo di vite e cuscinetti in gomma. Adatto alfissaggio di pannelli in vetro o policarbonato fuori cavaComplete of screw and rubber insert. Suitable to fix
glass or polycarbonate panels out of the slot
2 ÷ 10 mm 74
bLOCCHETTO DI FISSAGGIO - FIXING bLOCk
25
24,4
19
084.510.001
CODICECODE
DESCRIZIONEDESCRIPTION
SPESSORE PANNELLIPANELS THICkNESS
PESO gWEIGHT g
Completo di dado per il fissaggio pannello
Complete of nut for panel fixage
1 ÷ 8 mm 10
084.510.002
084.510.003
084.510.004
CODICECODE
DESCRIZIONEDESCRIPTION
SPESSORE DISTANZIALESPACER THICkNESS
PESO gWEIGHT g
Distanziale per / Spacers for 084.510.001
Distanziale per / Spacers for 084.510.001
Distanziale per / Spacers for 084.510.001
S = 2 mm
S = 3 mm
S = 5 mm
1
1
2
MATERIALE / MATERIAL: Poliammide nero - Black polyamide Confezione da 10 pz / Pack of 10 pz
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 110
20
5
2010
20 16
5.5
35.9
20
4.2
13.78
20 16
5.5
34.5
2.111È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
bLOCCHETTO DI FISSAGGIO - FIXING bLOCk
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
10
8bLOCCHETTO DI FISSAGGIO - FIXING bLOCk
bLOCCHETTO DI FISSAGGIO - FIXING bLOCk
084.510.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Blocchetto di fissaggio pannelli per profili cava 8 serie 40 dotato di dado M6
Fixing block for 40 series profiles. Complete of M6 nut
10
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.510.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Blocchetto di fissaggio pannelli per profili cava 8 serie 45 dotato di dado M6
Fixing block for 45 series slot 8 profiles. Complete of M6 nut
10
MATERIALE / MATERIAL: Poliammide grigio - Grey polyamide
084.510.008
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Blocchetto di fissaggio pannelli per profili cava 10 serie 45 dotato di dado M6
Fixing block for 45 series slot 10 profiles. Complete of M6 nut
10
NNEEWW
NNEEWW
NNEEWW
20
3.5
13.78.2
20 16
5.5
33.5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 111
2.112
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
108
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
DISTANZIALE - SPACER
084.510.010
084.510.011
084.510.012
CODICECODE
DISTANZIALE PERSPACERS FOR
SPESSORE PANNELLIPANELS THICkNESS
PESO gWEIGHT g
084.510.006 - 084.510.007 - 084.510.008
084.510.006 - 084.510.007 - 084.510.008
084.510.006 - 084.510.007 - 084.510.008
S = 2 mm
S = 3 mm
S = 5 mm
1
1
2
20
202
20
203
20
205
NNEEWW
8FISSAGGIO PANNELLI ESTRAIbILI - DETACHAbLE PANEL FIXING
084.519.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Dispositivo di fissaggio per pannelli estraibili con chiusura destraDetachable panels fixing device with right closure
33
NNEEWW
MONTAGGIO SU PORTA CON TELAIOFORO LAMATO A 9.5 mmDAL BORDOASSEMBLY ON DOORWITH FRAMEHOLE AT 9.5 mm FROM THE EDGE
MONTAGGIO SU PORTA SENZA TELAIOASSEMBLY ON DOOR WITHOUT FRAME26
.9
45
8
R26.9
5
8FISSAGGIO PANNELLI ESTRAIbILI - DETACHAbLE PANEL FIXING
084.519.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Dispositivo di fissaggio per pannelli estraibili con chiusura sinistraDetachable panels fixing device with left closure
33
NNEEWW
MONTAGGIO SU PORTA CON TELAIOFORO LAMATO A 9.5 mmDAL BORDOASSEMBLY ON DOOR WITH FRAMEHOLE AT 9.5 mm FROM THE EDGE
MONTAGGIO SU PORTA SENZA TELAIOASSEMBLY ON DOORWITHOUT FRAME
45
8
26.9
R26.9
5
È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 112
2.113È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
MOLLA A GAS - GAS SPRING
A
B ±2
D
P
L
b
084.527.001
084.527.002
084.527.003
084.527.004
084.527.005
084.527.006
084.527.007
084.527.008
084.527.009
084.527.010
084.527.011
084.527.012
084.527.013
084.527.014
CODICECODE
FORZA DI SPINTATHRUST FORCE
CORSA (mm) / TRAVELA
INTERASSE FORI (mm)HOLE WHEELBASE
B
PESO gWEIGHT g
50
100
150
200
250
300
100
100
200
250
300
350
250
350
110
110
110
110
110
110
115
142
142
142
142
142
200
200
263
263
263
263
263
263
305
365
365
365
365
365
483
483
96
96
96
95
95
97
109
190
190
194
194
194
237
237
Calcolo per il montaggio di una molla a gasTheory for the assembly of a gas spring
Definizione della forza di estensione F1 [N] a 20° C Definition of the extension force F1 [N] a 20° C
F1 = G x D
x 13 [N] b x n
G = Peso del portellone in Kg - Hatch weight in kg
L = Distanza tra il baricentro ed il punto di rotazione in mm Distance beetwen the centre of gravity and the rotation point in mm
b = Braccio di leva utile della molla a gas in mm, portellone aperto Useful lever arm of the gas spring in mm, open match
13 = Coefficiente di conversione kg - N + riserva di sicurezza Conversion coefficient kg - N + safety reserve
P = Fissaggio del portellone ca.2/3 L - Match clamping ca.2/3 L
n = Numero delle molle a gas (Standard: n = 2) Number of the gas springs (Standard: n = 2)
D = Braccio di leva utile della forza di gravità in mm, portellone aperto Useful lever arm of the force of gravity in mm, open match
Esempio - Example:
G = 30 kg, D = 400 mm, b = 200 mm, n = 2
F1 = 30 x 400
x 13 = 390 N 200 x 2
A richiesta sono fornibili altri modelli - On request they are supplied other models
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 113
2.114 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
1086
1086
SUPPORTO PER MOLLA A GAS - GAS SPRING SUPPORT
SUPPORTO PER MOLLA A GAS - GAS SPRING SUPPORT
SUPPORTO PER MOLLA A GAS - GAS SPRING SUPPORT
MATERIALE / MATERIAL: Poliammide rinforzato - Reinforced polyamide
084.528.001
084.528.002
CODICECODE
MATERIALEMATERIAL
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Poliammide grigia
Grey polyamide
Acciaio zincato
Galvanized steel
Supporto molla
Spring support
Perno supporto
Pin support
21
14
1086
084.528.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Kit supporto molla completo di perno Ø 6 mm(indicato per molle a gas di piccole dimensioni)
Spring support kit completed of pin Ø 6 mm(indicate for gas springs of small dimensions)
18
084.528.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Kit supporto molla completo di perno Ø 8 mm
Gas spring support kit with pin Ø 8 mm
63
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 114
2.115È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
CARRELLO DI SCORRIMENTO - SLIDING CARRIAGE 8
8PATTINO PER PORTE SCORREVOLI - SLIDING bLOCk FOR SLIDING DOORS
PATTINO PER PORTE SCORREVOLI - SLIDING bLOCk FOR SLIDING DOORS
MATERIALE / MATERIAL: Polietilene nero completo di rulli - Black polyethylene rollers completed
MATERIALE / MATERIAL: Perno e cuscinetto in acciaio, rondella in teflonSteel pin and bering, nylon washer
MATERIALE / MATERIAL: Poliammide nero - Black polyamide
084.532.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Per porte scorrevoli a strisciamento con prof. 18,5 x 32For scrapement sliding doors with prof. 18,5 x 32
11
084.532.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Per porte scorrevoli con prof. 18,5 x 45For sliding doors with prof. 18,5 x 45
24
Esempi di montaggio a pag. 2.131 - 2.135 - Assembly example at page 2.131 - 2.135
Esempi di montaggio a pag. 2.131 - 2.134 - 2.135 - Assembly example at page 2.131 - 2.134 - 2.135
084.520.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Carrello di scorrimento interno semplice - Inside sliding carriage 13
Esempi di montaggio a pag. 2.131 - Assembly example at page 2.131
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 115
2.116 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
8
8
PERNO PER PORTE A SOFFIETTO - PIN FOR bELOWS DOORS
CARRELLO DI SCORRIMENTO - SLIDING CARRIAGE
bOCCOLA PER PORTE A SOFFIETTO - bUSH FOR bELOWS DOORS
8
MATERIALE / MATERIAL: Perno e cuscinetto in acciaio, rondella in teflonSteel pin and bering, nylon washer
084.520.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Carrello di scorrimento esterno doppio - Outside sliding carriage 37
Esempi di montaggio a pag. 2.131 - Assembly example at page 2.131
084.533.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Boccola per soffietto - Belows bushes 2
Esempi di montaggio a pag. 2.136 - 2.139 - Assembly example at page 2.136 - 2.139
MATERIALE / MATERIAL: Poliammide rinforzato - Reinforced polyamide
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
Ø8.1Ø18
Ø14
31518
084.533.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Perno per micro - Pin for micro 27
Esempi di montaggio a pag. 2.136 - 2.139 - Assembly example at page 2.136 - 2.139
Ø8
70
3
8
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 116
2.117È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
8PERNO PER PORTE A SOFFIETTO - PIN FOR bELOWS DOORS
PERNO PER PORTE A SOFFIETTO - PIN FOR bELOWS DOORS
MATERIALE / MATERIAL: PVC bianco - White PVC
084.533.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Perno folle - Loose pin 15
Esempi di montaggio a pag. 2.136 - 2.139 - Assembly example at page 2.136 - 2.139
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
40
Ø8
Ø8
Ø15
Ø8
2.5
6.5
20
29
084.533.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Perno di strisciamento - Silding pin 3
Esempi di montaggio a pag. 2.136 - 2.139 - Assembly example at page 2.136 - 2.139
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 117
2.118 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
8
8
TERMINALI CONTRAPPESO - COUNTERWEIGHT TERMINALS
TAMPONE DI FINECORSA PARACOLPI - PAD LIMIT STOP PUFFER
MATERIALE / MATERIAL: Gomma nera - Black rubber
8
084.521.001
CODICECODE
MATERIALEMATERIAL
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Alluminio
Aluminium
Coppia terminali contrappeso dx-sx
Counterweight terminal couple
304
GRUPPO CONTRAPPESO - COUNTERbALANCE GROUP
084.534.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Gommino per battuta - Shoulder rubber 2
Esempi di montaggio a pag. 2.140 - 2.142 - Assembly example at page 2.140 - 2.142
084.521.006
CODICECODE
TIPO DI FORNITURATYPE OF SYPPLY
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
1 pezzoKit completo per la realizzazione di unosportello ad apertura verticale a contrappeso
Completed kit for the production of a doorwith counterbalance vertical opening
4000
Esempi di montaggio a pag. 2.140 - 2.142 - Assembly example at page 2.140 - 2.142
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 118
2.119
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
8
Ediz. 10
®
kIT CONTRAPPESI PER ATTACCO FRONTALE - COUNTERbALANCES kIT FOR FRONTAL ATTACk 8
8CONTRAPPESI - COUNTERbALANCES
GRUPPO CONTRAPPESO - COUNTERbALANCE GROUP
084.521.007
CODICECODE
TIPO DI FORNITURATYPE OF SYPPLY
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
1 pezzoKit comprendente 2 contrappesi in piombo dakg 1 tiranti in filettato da M5, dadi autobloccanti
da M5, terminali in plastica, dischettodi centraggio, perno di attacco catena
kit compound with 2 lead counterbalance ofkg 1 threated M5, auto-block M5 nuts, plastic
terminals, central disks, chain attack pivot
3000
Esempi di montaggio a pag. 2.140 - 2.142 - Assembly example at page 2.140 - 2.142
084.521.005
CODICECODE
TIPO DI FORNITURATYPE OF SYPPLY
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
2 pezziContrappesi in piombo da kg 1
Lead counterbalance kg 1
2000
084.521.008
CODICECODE
TIPO DI FORNITURATYPE OF SYPPLY
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
1 pezzoKit comprendente 2 staffe di attacco frontaledello sportello costruito con profilo 45 x 45
con viti, spessori e guide
kit compound with 2 frontal attack stirrupsof the door produced with 45 x 45 profile,
screws, thickness and guides
250
Esempi di montaggio a pag. 2.140 - 2.142 - Assembly example at page 2.140 - 2.142
È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 119
2.120 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
8
8
kIT CONTRAPPESI PER ATTACCO FRONTALE - COUNTERbALANCES kIT FOR FRONTAL ATTACk
CATENA - CHAIN
MATERIALE / MATERIAL: Acciaio - Steel
084.521.003
CODICECODE
MASSIMO CARICO [N]MAX LOAD [N]
DESCRIZIONEDESCRIPTION
PESO g/mlWEIGHT g/ml
2.800Catena in acciaio da 6 mm in confezione da 5 mt
Steel chain mm 6 in box of 5 mt
120
084.521.009
CODICECODE
TIPO DI FORNITURATYPE OF SYPPLY
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
1 pezzoKit comprendente 2 staffe di attacco frontaledello sportello costruito con profilo
18 x 32 o 18 x 45 con viti, spessori e guide
kit compound with 2 frontal attack stirrupsof the door produced with 18 x 32 or 18 x 45
profile, screws, thickness and guides
300
Esempi di montaggio a pag. 2.140 - 2.142 - Assembly example at page 2.140 - 2.142
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 120
2.121È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
6
Ediz. 10
®
8GUARNIZIONE PER PANNELLI - PANEL GASkET
GUARNIZIONE PER PANNELLI - PANEL GASkET
084.512.006
5004A/3170
084.512.034
084.512.056
084.512.008
084.512.034G
084.512.056G
CODICECODE
COLORECOLOUR
SPESSORE PANNELLIPANELS THICkNESS
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
1 mm
2 mm
3/4 mm
5 mm
6 mm
3/4 mm
5 mm
Nero/Black
Nero/Black
Nero/Black
Nero/Black
Nero/Black
Grigio/Grey
Grigio/Grey
Rotoli - Rolls da 90 m
Rotoli - Rolls da 120 m
Rotoli - Rolls da 150 m
Rotoli - Rolls da 250 m
Rotoli - Rolls da 500 m
Rotoli - Rolls da 150 m
Rotoli - Rolls da 250 m
106
100
60
34
34
60
34
084.512.003
084.512.002
084.512.001
CODICECODE
SPESSORE PANNELLIPANELS THICkNESS
CONFEZIONEPACkAGE
PESO g/mWEIGHT g/m
2 mm
3 mm
4 mm
Rotoli - Rolls da 200 m
Rotoli - Rolls da 280 m
Rotoli - Rolls da 250 m
50
50
50
MATERIALE / MATERIAL: Gomma termoplastica nera - Black rubber
MATERIALE / MATERIAL: Gomma termoplastica - Thermoplastic rubber
Lunghezza standard 2000 mm - Standard length 2000 mm
A richiesta sono fornibili in altri colori - On request they are supplied in other color
PROFILO DISTANZIALE - SPACER PROFILE 8
MATERIALE / MATERIAL: PVC rigido grigio - Rigid grey PVC
084.204.001
CODICECODE
PESO gWEIGHT g
DESCRIZIONEDESCRIPTION
Profilo distanziale - Distance profiles 117
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 121
2.122 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
MATERIALE / MATERIAL: PVC rigido e morbido - Rigid and soft PVC
MATERIALE / MATERIAL: PVC rigido e morbido - Rigid and soft PVC
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
8GUARNIZIONE AD INCASTRO - GROOVE GASkET
084.512.009
CODICECODE
SPESSORE PANNELLIPANELS THICkNESS
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
3 : 6 mmGuarnizione ad incastro per profili cava 8 standard
Groove gasket for standard slot 8 profiles
40
10GUARNIZIONE AD INCASTRO - GROOVE GASkET
084.512.010
CODICECODE
SPESSORE PANNELLIPANELS THICkNESS
DESCRIZIONEDESCRIPTION
PESO g/mWEIGHT g/m
3 : 6 mmGuarnizione ad incastro per profili cava 10 standard
Groove gasket for standard slot 10 profiles
45
15.1
9
10.8
12.7
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 122
2.123È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
8
8
PROFILO 2 VIE PER SCORREVOLI - 2 CHANNELS PROFILE FOR SLIDING ELEMENTS
GUIDA PER PORTE SCORREVOLI - GUIDE FOR SLIDING DOORS
6PROFILO MULTIUSO - MULTIUSE PROFILE
084.513.001
CODICECODE
SPESSORE PANNELLIPANELS THICkNESS
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
4/5 mm Lungh. standard - Standard length 2 m 470
MATERIALE / MATERIAL: PVC nero - Black PVC
084.515.001
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Profilo per la realizzazione di portescorrevoli a strisciamento realizzate
con profilato 18,5 x 32
Profile for to make sliding doorswith the profile 18,5 x 32
Lungh. standard 2 m
Standard length 2 m
394
MATERIALE / MATERIAL: Polizene nero - Black polyethylene
084.514.003
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Per la realizzazione di guide h. 23 mm
For guide manufacture h. 23 mm
Lungh. standard 2 m
Standard length 2 m
280
MATERIALE / MATERIAL: Polizene nero - Black polyethylene
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.43 Pagina 123
2.124 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
6
8
8PROFILO MULTIUSO - MULTIUSE PROFILE
PROFILO MULTIUSO - MULTIUSE PROFILE
MATERIALE / MATERIAL: Polizene nero - Black polyethylene
Parte bloccata nella cava - Fixed part into slot
Parte scorrevole nella cava - Sliding part into slot
MATERIALE / MATERIAL: Polizene nero - Black polyethylene
MATERIALE / MATERIAL: Polizene nero - Black polyethylene
084.514.006
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Per la realizzazione di guide h. 21 mm
For guide manufacture h. 21 mm
Lungh. standard 2 m
Standard length 2 m
310
1068
721
10
084.514.001
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Per la realizzazione di guide h. 32 mm
For guide manufacture h. 32 mm
Lungh. standard 2 m
Standard length 2 m
605
PROFILO MULTIUSO - MULTIUSE PROFILE
084.514.002
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Per la realizzazione di guide h. 40 mm
For guide manufacture h. 40 mm
Lungh. standard 2 m
Standard length 2 m
718
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 124
45
45
80
80
CENTRA PUNTA PER REALIZZAZIONEPANNELLI ASPORTABILI IN 18X32CON LUCE DI 2 mm O DI 5 mmDAL TELAIODRILL REFERENCE TO MAKE REMOVABLEPANELS IN 18X32 PROFILE WITH FRAME GAPOF 2 mm OR 5 mm
2.125È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
CANALINA PORTACAVI - CAbLE HOLDER CHANNEL
084.101.053
CODICECODE
DESCRIZIONEDESCRIPTION
PESO Kg/mlWEIGHT kg/ml
Canalina portacavi 45 x 45 mmCable holder channel 45 x 45 mm
0,70
084.101.054 Coperchio canalina portacavi 45 x 45 mmCable holder channel cover 45 x 45 mm
0,40
084.101.055 Canalina portacavi 80 x 80 mmCable holder channel 80 x 80 mm
1,50
084.101.056 Coperchio canalina portacavi 80 x 80 mmCable holder channel cover 80 x 80 mm
0,60
8PROFILO MULTIUSO IN ALLUMINIO - ALUMINIUM MULTIUSE PROFILE
084.514.011
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Profilo adatto alla realizzazione di fissaggi per pannelli asportabili
Profile suitable for fixing removable panels
Lungh standard6,04 m
1.000
MATERIALE / MATERIAL: Alluminio anodizzato - Anodized aluminium
29.5
10.5
4040
8
15.8 18.8
13.5
NNEEWW
10PROFILO MULTIUSO - MULTIUSE PROFILE
084.514.012
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO g/mWEIGHT g/m
Profilo adatto alla realizzazione di guideh = 40 mm
Profile suitable for fixing guide h = 40 mm
Lungh standard2 m
750
MATERIALE / MATERIAL: Polizene nero - Black polyethylene
19.8
40
328
10
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 125
2.126 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
PANNELLO IN POLICARbONATO - POLYCARbONATE PANEL
PANNELLO COMPOSITO IN ALLUMINIO - ALUMINIUM COMPOSITE PANEL
PANNELLO IN PVC ESPANSO - EXPANDED PANEL PVC
COLORECOLOUR
SPESSORETHICkNESS
DIMENSIONI LASTREPLATES DIMENSIONS kg/m2
Trasparente - Transparent
Trasparente - Transparent
Trasparente - Transparent
Trasparente - Transparent
Trasparente - Transparent
Fume - Fume
3 mm
4 mm
5 mm
8 mm
10 mm
5 mm
2050 x 3050 mm
2050 x 3050 mm
2050 x 3050 mm
2050 x 3050 mm
2050 x 3050 mm
2050 x 3050 mm
3,6
4,8
6
9,6
12
6
Materiale con ottima resistenza agli urti ed agli agenti atmosferici (-40°C/+120°C).È autoestinguente e ritardante di fiamma.Material with excellent resistance to the shocks and atmospheric agents (-40°C/-120°C).It’s self-extinguisher and flames retarder.
Pannello composito di alluminio con un’anima in polietilene. Materiale con alta resistenza alle escursioni termiche robusto, facile da piegare.Aluminium composite panel with a polyethylene heart. Material with a high resistanceto the thermic ranges of temperature strong, easy to bend.
COLORECOLOUR
SPESSORETHICkNESS
DIMENSIONI LASTREPLATES DIMENSIONS kg/m2
Metallo argento - Metallic silver 3 mm 1560 x 3050 mm 2,20
COLORECOLOUR
SPESSORETHICkNESS
DIMENSIONI LASTREPLATES DIMENSIONS kg/m2
Bianco - White
Azzurro - Blue
Nero - Black
3 mm
3 mm
3 mm
1560 x 3050 mm
1560 x 3050 mm
1560 x 3050 mm
2,10
2,10
2,10
Materiale leggero, con buona resistenza agli urti, autoestinguente,resistente all’acqua e agli acidi.Light material with a good resistance to the shocks, self-extinguisher,water and acids resistant.
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 126
2.127È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
RETE ELETTROSALDATA - ELECTROWELDED NET
PANNELLO IN LAMINATO STRATIFICATO COMPRESSO - COMPRESSED STRATIFIED LAMINATE PANEL
RETE ELETTROSALDATA - ELECTROWELDED NET
COLORECOLOUR
SPESSORETHICkNESS
DIMENSIONI LASTREPLATES DIMENSIONS kg/m2
Bianco - White
Bianco - White
Bianco - White
3 mm
4 mm
5 mm
1560 x 3050 mm
2050 x 3050 mm
2050 x 3050 mm
4,5
6
7,5
Materiale leggero, con buona resistenza agli urti, resistente all’acquaLight material with good resistance to the shocks, water resistant
Rete elettrosaldata 15 x 105 x 15 in acciaio (INOX o verniciato a polvere)Steel electrowelded net 15 x 105 x 15 (INOX or powder painted)
Rete elettrosaldata 40 x 40 in acciaioSteel electrowelded net 40 x 40
COLORECOLOUR
SPESSORETHICkNESS
DIMENSIONI LASTREPLATES DIMENSIONS kg/m2
Grezzo - Rough
Giallo - Yellow RAL 1003
Acciaio inox - Stainless steel AISI 304
3 mm
3 mm
3 mm
1240 x 2400 mm
1240 x 2400 mm
1240 x 2400 mm
4
4
4
COLORECOLOUR
SPESSORETHICkNESS
DIMENSIONI LASTREPLATES DIMENSIONS kg/m2
Grezzo - Rough 4 mm 1600 x 2000 mm 4,5
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 127
2.128 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
INTERRUTTORE DI SICUREZZA - SAFETY SWITCH
INTERRUTTORE DI SICUREZZA - SAFETY SWITCH
INTERRUTTORE DI SICUREZZA PER MONTAGGIO ASSI CERNIERA - SAFETY SWITCH FOR HINGE AXIS ASSEMbLY
084.601.001
084.601.002
084.601.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Finecorsa ad un 1 contatto NC - 1 NC contact limit switch
Finecorsa a 2 contatti 1 NC + 1 NA - 1NC + 1NA contacts limit switch
Finecorsa a 3 contatti 2 NC + 1 NA - 2 NC+ 1 NA contacts limit switch
160
184
143
084.602.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Interrutore di sicurezza a 2 contatti NC Safety switch with 2 NC contacts
131
084.603.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Finecorsa per montaggio assi cerniera con 2 contatti 1 NC + 1 NALimit switch for the assembly of hinge axis with 1 NC + 1 NA contacts
96
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 128
2.129È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
AC
CE
SS
OR
I D
I FI
NIT
UR
A -
FIN
ISH
ING
AC
CE
SS
OR
IES
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
PERNO PER MICRO ROTATIVO - PIN FOR SATETY SWITCH
PERNO PER MICRO ROTATIVO - PIN FOR SATETY SWITCH
PERNO PER MICRO ROTATIVO - PIN FOR SATETY SWITCH
084.531.001
CODICECODE
LUNGHEZZALENGHT
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
200 Adatto alle cerniere 084.500.001-002-003-004-005-006
Suitable for hinges 084.500.001-002-003-004-005-006
91
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Acciaio zincato - Galvanized steel
MATERIALE / MATERIAL: Acciaio inox - Stainless steel
084.533.002
CODICECODE
LUNGHEZZALENGHT
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
70 Adatto alle cerniere 084.503.002-003
Suitable for hinges 084.503.002-003
27
084.608.001
CODICECODE
LUNGHEZZALENGHT
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
180 Adatto alle cerniere 084.503.001
Suitable for hinges 084.503.001
65
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 129
2.130 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ACCESSORI DI FINITURA - FINISHING ACCESSORIES
Ediz. 10
®
PIASTRA FISSAGGIO MICRO - FIXING PLATE FOR MICRO
PIASTRA FISSAGGIO MICRO - FIXING PLATE FOR MICRO
PIASTRA FISSAGGIO MICRO - FIXING PLATE FOR MICRO
MATERIALE / MATERIAL: Alluminio - Aluminium
MATERIALE / MATERIAL: Alluminio - Aluminium
MATERIALE / MATERIAL: Acciaio inox - Stainless steel
084.604.001
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastrina sp. 6 mm - Plate thickness 6 mm 246
A
084.604.002
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastrina sp. 10 mm - Plate thickness 10 mm 5210
A
084.604.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Piastra fissaggio micro - Fixing plate for micro 91
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
Esempi di montaggio a pag. 2.131 - 2.142 - Assembly example at page 2.131 - 2.142
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 130
2.131È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ES
EM
PI
DI
MO
NTA
GG
IO -
AS
SE
Mb
LY E
XA
MP
LE
SISTEMI DI MONTAGGIO - ASSEMbLY SYSTEMS
Ediz. 10
®
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 131
2.132 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
SISTEMA DI MONTAGGIO PORTE CON INTERRUTTORE ROTATIVOASSEMbLY SYSTEM FOR DOORS WITH ROTATING SWITCH
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 132
2.133È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ES
EM
PI
DI
MO
NTA
GG
IO -
AS
SE
Mb
LY E
XA
MP
LE
Ediz. 10
®
SISTEMA DI MONTAGGIO PORTE CON INTERRUTTORE A FORCELLAASSEMbLY SYSTEM FOR DOORS WITH FORk SWITCH
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 133
2.134 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
SISTEMA DI MONTAGGIO PORTE SCORREVOLI CON PATTINI A STRISCIAMENTOASSEMbLY SYSTEM FOR SLIDING DOORS WITH SLIDING bLOCk
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 134
2.135È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
ES
EM
PI
DI
MO
NTA
GG
IO -
AS
SE
Mb
LY E
XA
MP
LE
Ediz. 10
®
SISTEMA DI MONTAGGIO PORTE SCORREVOLI CON PATTINI A ROTELLAASSEMbLY SYSTEM FOR SLIDING DOORS WITH WHEEL SLIDING bLOCk
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 135
2.136 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
SISTEMA DI MONTAGGIO PORTE A SOFFIETTO SEMPLICE SENZA INTERRUTTOREASSEMbLY SYSTEM FOR SIMPLE bELLOWS DOORS WITHOUT SWITCH
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 136
2.137È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ES
EM
PI
DI
MO
NTA
GG
IO -
AS
SE
Mb
LY E
XA
MP
LE
SISTEMA DI MONTAGGIO PORTE A SOFFIETTO SEMPLICE CON INTERRUTTORE ROTATIVOASSEMbLY SYSTEM FOR SIMPLE bELLOWS DOORS WITH ROTATING SWITCH
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 137
2.138 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
SISTEMA DI MONTAGGIO PORTE A SOFFIETTO DOPPIO SENZA INTERRUTTOREASSEMbLY SYSTEM FOR DOUbLE bELLOWS DOORS WITHOUT SWITCH
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 138
2.139È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ES
EM
PI
DI
MO
NTA
GG
IO -
AS
SE
Mb
LY E
XA
MP
LE
SISTEMA DI MONTAGGIO PORTE A SOFFIETTO DOPPIO CON INTERRUTTORE ROTATIVOASSEMbLY SYSTEM FOR DOUbLE bELLOWS DOORS WITH ROTATING SWITCH
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 139
2.140 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
SISTEMA DI MONTAGGIO SALISCENDI CON PROFILO 18x32LATCHES ASSEMbLY SYSTEM WITH PROFILE 18x32
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 140
2.141È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
ES
EM
PI
DI
MO
NTA
GG
IO -
AS
SE
Mb
LY E
XA
MP
LE
SISTEMA DI MONTAGGIO SALISCENDI CON PROFILO 18x45LATCHES ASSEMbLY SYSTEM WITH PROFILE 18x45
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 141
2.142 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
Ediz. 10
®
SISTEMA DI MONTAGGIO SALISCENDI CON PROFILO 45x45LATCHES ASSEMbLY SYSTEM WITH PROFILE 45x45
2.142
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 142
MASCHERA DI FORATURA - DRILLING TOOL 6
8
UT
EN
SIL
I - T
OO
LS
UTENSILI - TOOLS
Ediz. 10
®
MASCHERA DI FORATURA - DRILLING TOOL
PUNTA Ø 5.5 - DRILL Ø 5.5
MATERIALE / MATERIAL: Alluminio - Aluminium
MATERIALE / MATERIAL: Alluminio - Aluminium
084.818.005
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Punta Ø 5.5 adatta ai profili cava 6 mm
Drill Ø 5.5 suitable for slot 6 mm profiles
20
084.818.002
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Maschera di foratura per profili cava 6
Drilling toolo for profiles quarry 6
Completo di viti per il montaggio
Completed with screws for assembly
67
084.818.001
CODICECODE
DESCRIZIONEDESCRIPTION
TIPO DI FORNITURATYPE OF SUPPLY
PESO gWEIGHT g
Maschera di foratura per profili cava 8
Drilling toolo for profiles quarry 8
Completo di viti per il montaggio
Completed with screws for assembly
36
91,80
Ø5.5
2.143
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 143
2.144 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
156,80
Ø7.5
Ø7
92
Ø9
106
UTENSILI - TOOLS
Ediz. 10
®
PUNTA Ø 7.5 - DRILL Ø 7.5
PUNTA PER bOCCOLE - DRILL FOR bUSH
PUNTA PER bOCCOLE - DRILL FOR bUSH
084.818.006
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Punta Ø 7.5 adatta ai profili cava 8 mm
Drill Ø 7.5 suitable for slot 8 mm profiles
53
084.818.007
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Punta Ø 7 adatta alla foratura per boccole M5
Drill Ø 7 suitable for drilling for bush M5
50
084.818.008
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Punta Ø 9 adatta alla foratura per boccole M6
Drill Ø 9 suitable for drilling for bush M6
75
NNEEWW
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 144
150
Ø13.5
2.145È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
UT
EN
SIL
I - T
OO
LS
UTENSILI - TOOLS
Ediz. 10
®
PUNTA A DUE DIAMETRI - TWO DIAMETERS DRILL
PUNTA PER bOCCOLE - DRILL FOR bUSH
SET DI CHIAVI ESAGONALI - HEXAGONAL SPANNERS SET
084.818.010
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Set di chiavi esagonali 2,5 : 6 mm
Set of hexagonal spanners 2,5 : 6 mm
700
Ø11
120
084.818.009
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Punta Ø 11 adatta alla foratura per boccole M8
Drill Ø 11 suitable for drilling for bush M8
95
084.818.003
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Punta a due diametri Ø 9 - Ø 13,5 per lamatura
Two diameters drill Ø 9 - Ø 13,5 for spot facing screw
120
NNEEWW
NNEEWW
NNEEWW
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 145
2.146 È vietata la riproduzione del presente catalogo senza nostra autorizzazione. Ci riserviamo di eseguire modifiche sui nostri prodotti al fine di migliorarne le caratteristiche.The reproduction of this catalogue is prohibited. We could do some changes to our products in order to make better features.
UTENSILI - TOOLS
Ediz. 10
®
COLLA AD ALTA RESISTENZA - HIGH RESISTANCE GLUE
084.818.004
CODICECODE
DESCRIZIONEDESCRIPTION
PESO gWEIGHT g
Colla ad alta resistenza per il fissaggio dei perni nei rulli
High resistence glue suitable for fixing pin into rollers
70
ALUSIC ed.10-2012ACCESSORI_Layout 1 21/01/13 16.44 Pagina 146
top related