amateur radio training operating procedures v1.1 © essexham.co.uk
Post on 23-Dec-2015
216 Views
Preview:
TRANSCRIPT
AMATEUR RADIO TRAINING
Operating Procedures
v1.1 © essexham.co.uk
OPERATING PROCEDURES
• Making Contact• Use of “Calling Channel”• Introduction to Repeaters• Handling Abuse
Phonetic AlphabetA Alpha N November
B Bravo O Oscar
C Charlie P Papa
D Delta Q Quebec
E Echo R Romeo
F Foxtrot S Sierra
G Golf T Tango
H Hotel U Uniform
I India V Victor
J Juliet W Whiskey
K Kilo X X-ray
L Lima Y Yankee
M Mike Z Zulu
Making Contact on VHF• VHF is generally line-of-sight.
• 2 metres: 144 to 146MHz
• Note the “Mobile Calling” channel on the band plan at 145.500MHz
• Use this frequency to call for someone, or to call CQ
• … then move to a different frequency for your chat. This frees the ‘Calling Channel’ free for others
Calling Channel: Example
145.500 (Calling Channel)
Listen. If free, call CQ
M6QQQ answers and asks you to find a frequency
Tune to a voice frequency, e.g. 145.225
Listen. If nothing heard, ask “is this frequency in use?”
If free, return to Calling Channel
Call M6QQQ and ask them to change to 145.225
Tune to 145.225
Have your conversation
“Repeaters”• Repeaters extend ranges over a wide area, and allow
contact where signals may be blocked by obstacles
• Useful for handheld and mobile users
• The UK has over 400 voice repeaters
• Some may also be linked via the Internet
Repeater Network• Run by volunteers
• Commonly 2m or 70cm
• Frequencies are shared around the UK
• Full list at www.ukrepeaters.net
• Smartphone app available 2m repeaters 70cm repeaters
How Repeaters Work• An “input” and an “output”, so that they can transmit and
receive at the same time.
• Typically (but not always): • 2m repeaters transmit 600kHz above their input frequency• 70cms repeaters transmit 1.6MHz or 7.6MHz below the
input
• Repeaters are “smart”. They only let in valid signals
• Timeouts to cut down on long “overs”. Listen for the tone before transmitting, as this resets the timeout
• You need to program your radio with the offset, and a CTCSS tone to get access.
CTCSS TonesContinuous Tone Coded Squelch System
• CTCSS is a low frequency tone which is continuously transmitted as part of your audio
• Repeaters will only activate if they “hear” the correct CTCSS tone. This blocks interference
• There are nine blocks of tones in the UK, identified by letters
• You must program your radio to transmit the right CTCSS tone
Image source: ukrepeaters.net
Accessing a RepeaterWhen accessing a repeater:
• Ensure you have the correct ‘offset’ – Note the Minus sign
• Ensure you are sending the correct CTCSS tone – Note the “ENC” or “T” symbol
• Store the repeater setting to a memory for easy recall
Using a Repeater:
• Callsigns and locations used more often
• Timeouts and tones
• “This is M6QQQ listening for any calls”
• “BREAK”
• Repeater Nets
Listen in to your local repeater to learn the etiquette:
Handling Abuse
• Transmission of music, or inappropriate language is not acceptable
• Don’t respond to any abuse you may encounter and don’t confront the perpetrator
• If abuse is persistent, keep a log
• The RSGB’s AROS (Amateur Radio Observation Service) can help with repeated abuse
• Guidance on the Ofcom and RSGB websites
Summary• VHF QSO
• Find someone using 145.500 Calling Channel
• Have your conversation on a free voice channel
• Repeaters
• Covers more distance
• Radios need to be set for the offset and CTCSS tones
• Priority to mobile stations
• Abuse
• Don’t respond to any abuse you hear
OPERATING PROCEDURES
Any questions?
essexham.co.uk/train
top related