an exploratory study on the links between individual upcycling, product attachment and product...
Post on 21-Jan-2017
151 Views
Preview:
TRANSCRIPT
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Kyungeun Sung Supervisors: Tim Cooper and Sarah Kettley
Sustainable Consumption Research Group School of Architecture, Design and the Built Environment
An Exploratory Study on the Links between Individual Upcycling, Product
Attachment and Product Longevity
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Table of contents
Introduction
Method
Results
Discussions and conclusion
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Introduction
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Product attachment
The emotional bond experienced with a product (Schifferstein & Pelgrim, 2003)
Emerging concept for sustainable consumption (Cooper, 2004; Mugge, et al., 2004;
Van Hinte, 1997)
When attached to any product:
1. handle the product with care 2. postpone its replacement/disposal 3. repair it when it breaks down (Cramer, 2011; Ramirez, et al., 2010; Mugge, 2007;
van Hinte, 1997)
4. not necessarily requiring people to commit themselves to pro-environmental behaviour (van Nes, 2010)
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Past studies on product attachment
Little attention to ‘everyday creativity’ activities
Consumers’ favourite or most cherished possessions (Schultz, et al., 1989;
Wallendorf & Arnould, 1988)
Mass-produced, ordinary consumer durables (Mugge, et al., 2010; 2006; 2005)
Product personalisation, mass customisation and participatory design as design strategies to increase product attachment sustainable consumption (Cramer, 2011; Mugge, et al., 2009; Fletcher, 2008; Chapman, 2005)
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Individual upcycling
Creation or modification of any product out of used materials in an attempt to result in a product of higher quality or value than the compositional elements (Sung, et al., 2014)
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Individual upcycling and product attachment
Individual upcycling: relevant to product attachment and product longevity
Utilise old products with an emotional bond
Creative, engaging user activity (1) self-expression; (2) group affiliation; (3) special memories; and (4) pleasure possible product attachment determinants (Mugge, et al., 2006)
likely to create strong product attachment product longevity
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Increasing number of people who upcycle things
contemporary Maker Movement (Anderson, 2012; Lang, 2013)
readily available physical resources (e.g. Hackspaces)
shared digital resources (e.g. Instructables, Etsy)
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Research need in individual upcycling
Despite:
Visible growth in practice/behaviour
Potential as a strategy for product longevity + sustainable consumption
Individual upcycling has not yet been fully investigated in terms of its relation to product attachment and product longevity.
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Aims of the paper
1. address the links between individual upcycling, product attachment, and its determinants and consequences
2. Pinpoint possible group differences in the strength of the variables according to demographic characteristics and product categories
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Method
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Method
A questionnaire
23 UK-based consumers with upcycling experiences
between April and July 2014
Select up to 3 most emotionally attached, upcycled products
Fill in up to 3 questionnaires 44 questionnaires completed
Advertisement on Google groups/forums of public workshops
10 cities in 9 regions of England
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Respondents
Total: 23 (13 direct response + 10 snowball)
Age: between 24 and 66 years old
Nationality: British (74%; 17); non-British (26%; 6)
Gender: male (65%; 15); female (35%; 8)
Occupation: (1) science and engineering (52%; 12); (2) art and design (30%;7); (3) other areas (heath service, business and management) or unemployed (17%; 4)
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Measures
Product attachment + product attachment determinants + product attachment consequences + aesthetic and functional satisfaction: 7-point Likert scale (1 = “strongly disagree”, 7 = “strongly agree)
Expected product lifetime years: absolute figure
Variable items: based on past studies by Mugge et al.
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Analysis
Descriptive statistics
Correlational analysis (Spearman’s Rank Order Correlation)
Non-parametric tests (Mann-Whitney U Test and Kruskal-Wallis H Test)
SPSS (Statistical Package for the Social Sciences) version 22.0.
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Results
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Product attachment determinants and consequences
Expected lifetime years: range between 1 and 50 years with mean value of 11.67 years (SD =13.23)
Descriptive analysis
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Product attachment, product attachment determinants and satisfaction Correlational analysis (Spearman’s Rank Order Correlation)
1
2
3
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Product attachment and product attachment consequences Correlational analysis (Spearman’s Rank Order Correlation)
1
2
3
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Gender difference Non-parametric test (Mann-Whitney U Test)
All PA determinants
PA
PA consequences except for disposal
tendency
Satisfaction
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Age difference Non-parametric test (Kruskal-Wallis Test)
Gp1: below 30 Gp2: between 30 and 49 Gp3: 50 and over
Product attachment
determinants
Product attachment
Product attachment consequences
Satisfaction
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Occupational difference Non-parametric test (Kruskal-Wallis Test)
Gp1: art and design Gp2: science and engineering Gp3: other
PA determinants except for group
affiliation and pleasure
PA consequences except for disposal
tendency
Product attachment
Satisfaction
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Product category difference Non-parametric test (Kruskal-Wallis Test)
Difference in irreplaceability levels
Small home products and/or decorations: highest median (6.5)
Other personal belongings (Md=5.5)
Inside-the-home furniture (Md=3.5)
Experimental and/or artistic projects (Md=2)
Garden, shed, workshop and/or outdoor products (Md=1.5)
Gp1: experimental and/or artistic projects
Gp2: inside-the-home furniture
Gp3: garden, shed, workshop and/or outdoor products
Gp4: small home products and/or decorations
Gp5: other personal belongings
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Discussions & Conclusion
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Summary
Corroborate the past studies
1. Correlation between product attachment and its determinants
2. No correlation between product attachment and satisfaction
3. Women and older consumers more relevant to attachment determinants
4. Product attachment higher for ornaments than functional products
New findings
1. Pleasure correlated only with functional satisfaction
2. Irreplaceability may mediate the effect of attachment on product care and expected product longevity
3. Occupational difference: product attachment determinants & consequences
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Limitations + future research
Limited sample
more research for verification
Proportion of all upcycled products exhibiting meaningful levels of product attachment
possible rebound effect + actual environmental impact
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Contributions
Individual upcycling has the potential to contribute towards sustainable production and consumption at the household level through strengthening product attachment
Demographic characteristics and product categories to consider for possible scaling up
Kyungeun Sung, Sustainable Consumption Research Group, School of Architecture, Design and the Built Environment
Thank you! Any question?
Kyungeun.sung2013@my.ntu.ac.uk http://kyungeunsung.com/ https://www.researchgate.net/profile/Kyungeun_Sung
top related