an industrial training institute & comprehensive...
Post on 28-Feb-2019
216 Views
Preview:
TRANSCRIPT
GRM Engineering Services Pvt Ltd. Regd. Office: N-17A, Ground Floor, Abul Fazal Enclave – Part1, Jamia Nagar, Okhla, New Delhi – 110025, INDIA Ph: +91-9911014477, 8800711264, Email: tashrif@grmenggservices.com, Website: www.grmenggservices.com
ENGINEERING SERVICES Pvt Ltd. MEP - DESIGN, DRAFTING, TRAINING, CONSULTATION & CONTRACTING
Regd. Under the Companies Act 2013, Ministry of Company Affairs, Govt. of India
An Industrial Training Institute & Comprehensive Engineering Solution for HVAC
CIN: 74999DL2018PTC328030
Training Programme
Schedule & Syllabus
1. HVAC Design & Drafting (Regular/Part time Batches)
Schedule:
Eligibility : B.Tech/Diploma in Engg (Mechanical)
Duration : 3 months regular Batch (3 hrs/day, Mon – Fri)
Timing : 9:00 AM to 5:00 PM
Batch Start : 12th February 2018
Fees : RS 10500/- + 18% GST
2. CAD Drafting using AutoCAD (Regular/Part time Batches)
Schedule:
Eligibility : B.Tech/Diploma in Engg/ITI/Graduation/10+2
Duration : 3 months regular Batch (3 hrs/day, Mon – Fri)
Timing : 9:00 AM to 5:00 PM
Batch Start : 12th February 2018
Fees : RS 6500/- + 18% GST
GRM Engineering Services Pvt Ltd. Regd. Office: N-17A, Ground Floor, Abul Fazal Enclave – Part1, Jamia Nagar, Okhla, New Delhi – 110025, INDIA Ph: +91-9911014477, 8800711264, Email: tashrif@grmenggservices.com, Website: www.grmenggservices.com
ENGINEERING SERVICES Pvt Ltd. MEP - DESIGN, DRAFTING, TRAINING, CONSULTATION & CONTRACTING
Regd. Under the Companies Act 2013, Ministry of Company Affairs, Govt. of India
An Industrial Training Institute & Comprehensive Engineering Solution for HVAC
CIN: 74999DL2018PTC328030
:Training Programme Syllabus:
Introduction to HVAC
Basic concepts & Fundamentals of HVAC Scope of HVAC design & drafting Standards & codes used in HVAC Modes of Heat Transfer Sensible heat & Latent heat
Basic components of Refrigeration & Air conditioning system
Basics of refrigeration system (Vapour compression & Vapour absorption) Pressure-Enthalpy chart Function & types of Compressors, Condensers, Expansion valves & Evaporators Accessories used in refrigeration system Refrigerants & Brines
Classification of Air conditioning system
Window air conditioning system Working principle of window AC with line diagram. Application, advantages & disadvantages
Split/De-centralised air conditioning system Working principle of split A/C system with line diagram Type of Split A/C (DX system/Ducted split unit) Application, advantages & disadvantages. Variable Refrigerant Volume (VRV) & Variable Refrigerant Flow (VRF)
Packaged Air conditioning system Working principle of Packaged A/C system with line diagram. Types of Packaged A/C system (Ducted Package unit/ Roof top package unit)
Central Plant Air conditioning system
Categories of Air conditioning system
All air system All water system Air-Water system Direct Expansion (DX) system
3 months Certificate Course in HVAC Design & Drafting
GRM Engineering Services Pvt Ltd. Regd. Office: N-17A, Ground Floor, Abul Fazal Enclave – Part1, Jamia Nagar, Okhla, New Delhi – 110025, INDIA Ph: +91-9911014477, 8800711264, Email: tashrif@grmenggservices.com, Website: www.grmenggservices.com
ENGINEERING SERVICES Pvt Ltd. MEP - DESIGN, DRAFTING, TRAINING, CONSULTATION & CONTRACTING
Regd. Under the Companies Act 2013, Ministry of Company Affairs, Govt. of India
An Industrial Training Institute & Comprehensive Engineering Solution for HVAC
CIN: 74999DL2018PTC328030
Study of Psychometric chart
Dry Bulb Temperature (DBT), Wet Bulb Temperature (WBT), Dew Point Temperature (DPT), Relative Humidity (RH), Enthalpy, Humidity Ratio, Specific Volume.
Psychometric Processes (Sensible Heating/Cooling, Latent Heating/Cooling, Heating & Humidification, Heating & De-humidification, Cooling & Humidification, Cooling & De-humidification).
Finding Values using chart
Heating/Cooling Load Calculations
Survey of building Finding Temperature Difference (T) for Wall, Roof, Glass & Partitions. Finding U Factor for Wall, Roof, Glass & Partitions. Finding Ventilation requirements for IAQ Load Calculations (Manually using E-20 form) Calculations for ESHF, ADP & Air flow rate (CFM)
Air Distribution system
Duct definition & Terminology Duct design consideration Duct sizing methods & Duct sizing as per Aspect Ration (AR) Finding duct size using Ductulator. Calculation of No. of sheets for duct. Gauge selection for sheet metal. Bill of material for Ducting network. Selection of Diffusers, Registers & grills. Duct material & Insulation material used in HVAC industry. Study of Overseas drawings. Duct routing – Preparation of Single Line Diagram (SLD) Preparation of Final duct layout – Double line diagram (DLD) as per SMACNA standards. Opening for ducts passing through wall/slab. Preparation of sectional drawing @ duct support. Basic Concepts & working principle of CAV & VAV.
Duct Static Pressure calculations
External Static Pressure (ESP) calculation for fan Motor HP selection. Selection of Fan/Blower speed (RPM)
Hydronic System:
Classification of chilled water piping
GRM Engineering Services Pvt Ltd. Regd. Office: N-17A, Ground Floor, Abul Fazal Enclave – Part1, Jamia Nagar, Okhla, New Delhi – 110025, INDIA Ph: +91-9911014477, 8800711264, Email: tashrif@grmenggservices.com, Website: www.grmenggservices.com
ENGINEERING SERVICES Pvt Ltd. MEP - DESIGN, DRAFTING, TRAINING, CONSULTATION & CONTRACTING
Regd. Under the Companies Act 2013, Ministry of Company Affairs, Govt. of India
An Industrial Training Institute & Comprehensive Engineering Solution for HVAC
CIN: 74999DL2018PTC328030
Pipe sizing for chilled water system Fitting & Valves used in HVAC piping system Function of Valves Opening for chilled water pipes passing through wall Sectional drawing @ chilled water piping support Pump Head Calculations Selection of chilled water pumps
Equipment Selections:
Selection of Air conditioning equipments Selection of Chiller, AHU, FCU, Fans, Chilled water pumps. Air Terminals selection
HVAC Drafting:
Introduction to Drafting using AutoCAD Symbol & codes used in HVAC Drafting Types of drawings used industry Study & preparation of floor drawings. Conventional type Air conditioning system drawings (Window, split & Cassete type Air
conditioning system) Ventilation system drawings (Car parking & Toilet ventilation drawings) Chilled water piping drawings Ductable & Packaged air conditioning system drawings. Preparation of sectional & detailed drawings
Project Estimation:
Understanding the Tender requirements. Preparation of BOQ (Bill of Quantity)
Fire Protection & Control system:
Basic concepts of Fire alarm system, Control system (DDC) Building Management system (BMS) and interference with HVAC equipments.
HVAC Software:
XL sheet for Heat/Cooling load calculations Duct-sizer for duct sizing and Pipe-sizer for pipe sizing Trox CAD Base for Diffuser/Grill selection. Psychometric soft
GRM Engineering Services Pvt Ltd. Regd. Office: N-17A, Ground Floor, Abul Fazal Enclave – Part1, Jamia Nagar, Okhla, New Delhi – 110025, INDIA Ph: +91-9911014477, 8800711264, Email: tashrif@grmenggservices.com, Website: www.grmenggservices.com
ENGINEERING SERVICES Pvt Ltd. MEP - DESIGN, DRAFTING, TRAINING, CONSULTATION & CONTRACTING
Regd. Under the Companies Act 2013, Ministry of Company Affairs, Govt. of India
An Industrial Training Institute & Comprehensive Engineering Solution for HVAC
CIN: 74999DL2018PTC328030
Unit 1: (Duration – 2 hrs)
Introduction to CAD, familiarization with CAD standards. Basic utilities tools – Open, Save, New, Units
Unit 2: (Duration – 2 hrs)
Drawing utilities function keys – Setting drawing Limits, Zoom, Pan, Setting Snap, Grid & Osnap.
Unit 3: (Duration – 10 hrs)
Basic Draw tools – Point locating methods, Line, Arc, Circle, Rectangle, Polygon, Ellipse, Solid Donuts & Filled objects.
Unit 4: (Duration – 10 hrs)
Basic Editing tools – Method of selection, Erase, Move, Copy, Break, Offset, Array, Mirror, Scale, Rotate.
Unit 5: (Duration – 6 hrs)
Object Properties – Color, Linetype, Lineweight, Layers, Changing object properties, Matching properties.
Unit 6: (Duration – 10 hrs)
Adding Text information to drawings – Text, MText, Text style, Text edit, Find.
Unit 7: (Duration – 10 hrs)
Advanced Draw & Editing tools – Hatch, Hatch edit, Pline, Pedit, Spline, Sedit, Multi line,
Explode, Xline, Ray, Point, DDPtype.
Unit 8: (Duration – 10 hrs)
Advanced Modifying Tools – Trim, Extend, Stretch, Lengthen, Chamfer, Fillet, Editing with
Grips.
3 months Certificate Course in CAD Drafting (AutoCAD)
GRM Engineering Services Pvt Ltd. Regd. Office: N-17A, Ground Floor, Abul Fazal Enclave – Part1, Jamia Nagar, Okhla, New Delhi – 110025, INDIA Ph: +91-9911014477, 8800711264, Email: tashrif@grmenggservices.com, Website: www.grmenggservices.com
ENGINEERING SERVICES Pvt Ltd. MEP - DESIGN, DRAFTING, TRAINING, CONSULTATION & CONTRACTING
Regd. Under the Companies Act 2013, Ministry of Company Affairs, Govt. of India
An Industrial Training Institute & Comprehensive Engineering Solution for HVAC
CIN: 74999DL2018PTC328030
Unit 9: (Duration – 4 hrs)
Enquiry commands – ID, List, Dist, Area
Unit 10: (Duration – 6 hrs)
Working with Dimensions – Adding Dimensions: Linear, Angular, Aligned, Radius,
Diameter, Leader.
Dimensions Editing, Dimension style.
Unit 11: (Duration – 10 hrs)
Productivity Tools – Group filter, Block, Mblock, Insert, Minsert, Divide, Measure.
Unit 12: (Duration – 20 hrs)
Basic Plotting Techniques
Learn how to create a drawing.
Unit 13: (Duration – 20 hrs)
Drawing Project Tasks.
top related