andrew hbx6516dsvtm

Post on 08-Nov-2014

55 Views

Category:

Documents

5 Downloads

Preview:

Click to see full reader

TRANSCRIPT

 

HBX-6516DS-VTM DualPol® Teletilt® Antenna, 1710–2170 MHz, 65° horizontal beamwidth, RET compatible  

l Superior azimuth tracking and pattern symmetry to minimize any sector overlap 

l Field adjustable electrical tilt 

l Rugged, reliable design with excellent passive intermodulation suppression 

l Fully compatible with Andrew Teletilt® remote control system 

Electrical SpecificationsFrequency Band, MHz 1710–1880 1850–1990 1920–2170Gain, dBi 17.7 18.0 18.0Beamwidth, Horizontal, degrees 65 65 65Beamwidth, Vertical, degrees 7.5 7.0 6.5Beam Tilt, degrees 0–10 0–10 0–10USLS, typical, dB 18 18 18Front­to­Back Ratio at 180°, dB 30 30 30Isolation, dB 30 30 30VSWR | Return Loss, dB 1.4:1 | 15.6 1.4:1 | 15.6 1.4:1 | 15.6PIM, 3rd Order, 2 x 20 W, dBc ­153 ­153 ­153Input Power per Port, maximum, watts 350 350 350Polarization   ±45° ±45° ±45°Impedance   50 ohm 50 ohm 50 ohmLightning Protection   dc Ground dc Ground dc Ground

Mechanical Specif ications Color | Radome Material  Light gray | PVC, UV resistant 

Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 

Wind Loading, maximum  256.8 N @ 150 km/h57.7 lbf @ 150 km/h 

Wind Speed, maximum  241.0 km/h   |   149.8 mph 

  

Dimens ions Depth  83.0 mm   |   3.3 in 

Length  1306.00 mm   |   51.42 in 

Width  166.00 mm   |   6.54 in 

Net Weight  4.70 kg   |   10.36 lb 

  

Remote E lec t r ical T i l t (RET) In format ion Model with Factory Installed AISG 1.1 Actuator HBX­6516DS­R2M 

Model with Factory Installed AISG 2.0 Actuator HBX­6516DS­A1M 

Regulatory Compliance/Cert i f icat ionsAgency ClassificationRoHS 2002/95/EC Compliant by ExemptionChina RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV)ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

Product Specifications

©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

page 1 of 2April 27, 2012

   

Inc luded Produc ts

602030A — Downtilt Mounting Kit for 2.4 ­ 4.5 in (60 ­ 114 mm) OD round members 

Product SpecificationsHBX-6516DS-VTM

©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

page 2 of 2April 27, 2012

top related