arum sintering furnaces 001 - hoil dental shopmaximum temperature 1400 °c combustion chamber volume...
Post on 09-Jul-2020
7 Views
Preview:
TRANSCRIPT
Sintering furnacesModel overview
TABEO
HTHT Speed
HT-SHT-S Speed
NEW
Standard equipment
Special equipment
Technical data
Heating elements
MoSi2-Standard, 140 4 4 – – –
MoSi2-Speed, 140 – – 4 – –
MoSi2-Standard, 160 – – – 6 –
MoSi2-Speed, 160 – – – – 6
Thermocouple
PtRh-Pt 140 mm, Typ S l l l l l
Program control
Display 7-segment LED, 4 dwelling steps9 programs free l l l – –
LCD display; 4 dwelling steps, 25 programs freeText input, four-line display – – – l l
General information in comparison
Capacity, number of sintering bowls, 1 x 1 x 1 x 2 x 2 xØ mm 100 100 100 120 120
Maximum temperature °C 1650 1650 1650 1650 1650
Maximum programmable heating rate °C/min 30 30 70 30 99
Speed function – – l – l
Energy consumption/cycle kWh 1* 3,8 3,8 4,0 5,2 5,5
Energy consumption/speed cycle kWh 1* – – 2,2 – 2,5
Power W 1300 1720 2000 3100 3800
Voltage V 220-240 200-240 220-240 200-240 220-240 Frequency range 50/60 Hz
Weight kg 55 58 58 75 75
Dimensions W/H/D cm 40/60/40 39/78/50 39/78/50 50/80/60 50/80/60
1* standardized program parameters of the manufacturer Subject to technical change without prior notice.
Sintering tools
Sintering bowl 100 mm l l O1 – –
Cover for sintering bowl 100 mm l l O1 – –
Sintering bowl 120 mm – – – l O1
Cover for sintering bowl 120 mm – – – l O1
Speed sintering bowl 100 mm O O l – –
Speed sintering bowl 120 mm – – – O l
YTZ sintering beads 2 mm; 200 g l l l l l
Operating accessories
Removing pliers – l l l l
Removing fork l – – – –
Base for speed sintering bowl 100 mm O O O – –
Ring for speed sintering bowl 100 mm O O O – –
Base for speed sintering bowl 120 mm – – – O O
Ring 120 mm for speed sintering bowl – – – O O
Sintering disc 100 mm O O O1 – –
Sintering disc 120 mm – – – O O1
Diamond grinding stone for sintering discs 2* O O O O O
YTZ sintering beads 1.25 mm; 200 g O O O O O
2* To work on the sintering discs
TAB
EO
TAB
EO
TAB
EO
TAB
EO
HT-
S
HT-
SH
T-S
HT-
S
HT-
S S
pee
d
HT-
S S
pee
dH
T-S
Sp
eed
HT-
S S
pee
d
HT
HT
HT
HT
HT
Sp
eed
HT
Sp
eed
HT
Sp
eed
HT
Sp
eed
Sintering bowl
Base for speed sintering bowl
Speed bowl
Sintering disc
Removing pliers
YTZ sintering beads1.25 mm
Cover
Ring for speed sintering bowl
YTZ sintering beads, 2.00 mm
Diamond grinding stone
Removing fork
l Scope of deliveryO Optionally availableO1 Optional, but not to use for speed cycles– not available
Special functions
Special features
Special programs for ventilated heating up – – – l l
Special programs with pre-drying stage – – – l l
RS-232 interface O l l l l
Emergency cooling function – l l l l
Door control via lift function – l l l l
Electronic door lock l – – – –
Network interruption control l l l l l
Door hinges left/right O – – – –
l Scope of deliveryO Optionally availableO1 Optional, but not to use for speed cycles– not available
l Scope of delivery O Optionally available– not available
l Scope of deliveryO Optionally available– not available
Arum 3D Solutions Limited Address: 43 Compton Close, London, NW1 3QS, U.K Tel: +44 (0)207 504 0400 Email: info@arum3d.com
and solutions for high standards at a fair price.
Compact and with a small space requirement the new sintering furnace
20 single crowns.
The freely selectable programs simplify the handling and allow all sintering functions with standard sintering programs. The electronic door lock prevents premature opening. According to your individual needs the door hinge can be ordered to right or left.
The sintering furnaces of HT-S series are the ideal complement to all existing CAD / CAM systems and materials for laboratories with a smaller and medium workload.
Freely selectable programs simplify the handling and the door lift allows a comfortable arrangement of the sinter pad. An optimal distribution of the heat
Ø 100 mm for up to 20 individual crowns.
The variant HT-S Speed additionally allows to shorten process times depending
-rature furnaces of HT series offer a majority of standard and special functions. These functions will support you at medium to high workload and are the ideal completion of your CAD / CAM system in the laboratory and milling center.
They are easy to use and offer an even more convenient operation via an easy- to-understand display. In addition, freely selectable programs with additional texts make working easier. The larger chamber volume for up to two large sintering bowls Ø 120 mm allows the production of scaffolding and up to 50 single crowns.
The variant HT Speed allows faster heat-up rates to shorten process times
Technical data TABEO
Temperature max. 1650 °C
Combustion chamber volume 1 bowl Ø 100 x 35 mm
Power max. 1300 W
Voltage range 220 V – 240 V; 50/60 Hz
Weight kg 55
Dimensions W/H/D cm 40/60/40
Technical data HT-S HT-S Speed
Temperature max. 1650 °C 1650 °C
Combustion chamber volume 1 bowl Ø 100 x 35 mm 1 bowl Ø 100 x 35 mm
Power max. 1720 W 2000 W
Voltage range 200 V – 240 V; 50/60 Hz 220 V – 240 V; 50/60 Hz
Weight kg 58 58
Dimensions W/H/D cm 39/78/50 39/78/50
Technical data HT HT Speed
Temperature max. 1650 °C 1650 °C
Combustion chamber volume 2 bowls Ø 120 x 35 mm 2 bowls Ø 120 x 35 mm Delivery-contents: 1 bowl Delivery-contents: 1 bowl, 2nd bowl optional 2nd bowl optional
Power max. 3100 W 3800 W
Voltage range 200 V – 240 V; 50/60 Hz 220 V – 240 V; 50/60 Hz
Weight kg 75 75
Dimensions W/H/D cm 50/80/60 50/80/60
TABEO HTHT Speed
HT-SHT-S Speed
Mihm-Vogt · Dental Gerätebau GmbH & Co. KGFriedrich-List-Str. 8 · 76297 Stutensee-BlankenlochTelefon: +49 (0) 7244 70871-0 · Telefax: +49 (0) 7244 70871-20info@mihm-vogt.de · www.mihm-vogt.de
The HT-S/metal is another member of the Mihm-Vogt series HT-S.
Beside his standard programs the argon sintering furnace is individually programmable and allows sinteringof CoCr alloys up to a sintering temperature of 1400 °C. Due to the combination of the four-part sintering guard with sintering beads under an argon atmosphere good sintering results will be achieved.
Thanks to the optional exhaust systemthere are almost no binder residuesin the metal and inside the heating chamber.
Because of the proven night-time function of the furnace control the sintering cycle of approximately 4.5 hours* can be planned into the production processes beyond the lab hours.
HT-S/metal
Arum 3D Solutions Limited Address: 43 Compton Close, London, NW1 3QS, U.K Tel: +44 (0)207 504 0400 Email: info@arum3d.com
Technical data HT-S/metal
Maximum temperature 1400 °C
Combustion chamber volume 1 sintering guard set (up to 20 individual crowns)
Power max. 1300 W
Voltage range 200 - 240 V
Weight kg 58
Dimensions W/H/D cm 39/78/50
Heating elements 4 units MoSi2-Standard, 140
Thermocouple PtRh-Pt 140 mm, Type S
Program control LCD Display; 4 dwelling steps, 25 programs free Text input, four-line display
Interface RS232
Connections For argon For compressed air (only in combination with the exhaust system)
Technical data
Standard equipment
Sintering guard set
Exhaust system
YTZ sintering beads 1.25 mm
Removal pliers
> extracts the binder residues automatically off the heating chamber while debindering
Exhaust system (optional)
top related