aston martin mkiii - aston workshop book
Post on 06-Mar-2016
258 Views
Preview:
DESCRIPTION
TRANSCRIPT
DB2/4 Mk III
AM/300/3/1815
Restoration of the classic Aston Martin
DB MkIII book latest copy 2:Layout 1 2/12/10 11:46 Page 1
DB MkIII book latest copy 2:Layout 1 2/12/10 11:46 Page 2
CONTENTS
CHAPTER ONEThe History of Aston Martin
Origins
The Interwar Years
Enter David Brown
Lagonda Motors
The Post War Years up to 1971
Change of Ownership
Aston Martin in Competition
CHAPTER TWOThe DB2/4 MkIII - A Car for All Time
Development History
Chassis Development
Suspension
Engine and Transmission Developments
Gearbox
Braking System
Other DB2 Developments
The DB2 / 4
The DB MKIII
The DB MKIII Engine Redesign
The Updated DB MKIII Body
The DB MKIII Chassis and Suspension
Changes
CHAPTER THREEHistory and Restoration of a DB 2/4
MK III
Early Restoration
Major Bodywork
New Owner
C CHAPTER ONE
The History of Aston Martin
DIARY DETAILS FROMRON POWELL
APPENDIX AThe Post War Models up to 1964
The DB1
The DB2
The DB2/4
DB2/4 MkIII
DB 4DB5
APPENDIX B
Letters Etc.
APPENDIX C
Restoration Notes
DB MkIII book latest copy 2:Layout 1 2/12/10 11:47 Page 4
The History of Aston Martin is a long and convoluted one is not untypical of much of the early and mid 20th
century of British sports car manufacturing. Like so many of the illustrious names of British motoring history,
this was a car company formed initially to enable a select group of wealthy individuals to go racing and hill
climbing.
The start of what became Aston Martin was the occasion in early May 1914, when a certain Lionel Martin
ascended the hill climb at Aston Clinton in a specially tuned Singer 10 and winning his class on handicap.
By then he had resolved that he wanted to start manufacturing light sporting cars for the wealthy sportsman.
Supposedly he drew a connection between his own name and the hill climb at which he came to prominence.
This we presume led him to naming his cars Aston Martin.
Lionel Martin was the son of a wealthy family with business in granite quarries in Lincolnshire. He was already
a partner in an established company, Bamford and Martin, a garage in London, which he founded with his
good friend Robert Bamford in 1912. They had taken on an agency for Singer cars, with the intent to tune
and modify them for sporting use. With a colleague and mechanic Jack Addis, they had formed a successful
partnership in developing the Singer 10 into a competitive light car,capable of over 70 mph. Other motor sport
enthusiasts soon asked for replicas of his own car, following the success he was enjoying. Encouraged by this
he and his business partner Robert Bamford decided to go into car manufacture; a decision taken
following his success at the Aston Clinton hill climb.
Rather than continue in modifying and tuning Singer 10 cars, Lionel Martin decided that they should create
their own design, using a proprietary 1400 cc Coventry Simplex engine. Impatient to make an early start,
they adapted an Isotta Fraschini Voiturette chassis; a car already with a successful sporting pedigree. The
prototype was ready in August 1914 and was entered in the Brighton Speed trials. Shortly after, World
War 1 commenced, thus bringing an immediate halt to any further activities.
ORIGINS THE INTERWAR YEARS
In 1920, Lionel Martin revived the business and restarted design and development of his car, beginning with
the design and manufacture of their own chassis. The Coventry Simplex engine, which they had used in 1912,
was heavily modified and tuned. Bodies were designed and built in house as simple open sporting cars, with
minimal weather protection. By 1925 some 23 examples had been completed. There were 3 further
development cars built, each being optimised for competition: the last one, named “Bunny”, successfully
breaking the hill record at Brooklands in 1922.
In 1921, Robert Bamford withdrew from Bamford and Martin, his place as director being taken by Lionel
Martin’s wife, Katherine. As development costs mounted, it became necessary for Lionel Martin to find
sponsorship to allow him to continue development and production. In this he was successful and shortly
after in 1922, he obtained £10,000 sponsorship from Count Zborowski, who commissioned him to create
a racing car, powered by a twin overhead camshaft engine, to be entered for the 1922 French Grand Prix.
Two cars were built for this race and neither finished. By 1924, his company had absorbed £100,000, and it
became essential that further capital be obtained if development and production were to continue. Again,
Lionel Martin was successful and in 1924, he had invited the son of Lord and Lady Charnwood, the Hon
John Benson, to join Bamford and Martin as director. This led to access to further finance, but for this,
John Benson was given the lead in designing and developing another all new, twin overhead camshaft-racing
engine; a costly project. They exhibited at the 1925 Olympia Motor Show, but within a few weeks of the
show closing, the firm was put into receivership and Lionel Martin was asked to withdraw from the company.
Lord Charnwood then bought the physical assets of Aston Martin and the company was put up for sale. It
generated great interest, including the Vauxhall Motor Company. The company was bought soon after,
however, by Mr William Summerville Renwick who then merged it with his firm Renwick and Bertelli, the
shareholding then being split 50-50 with Lord Charnwood to form Aston Martin Motors.
Renwick and Bertelli was formed originally to design, build and manufacture high efficiency small engines
for sporting use, which could then be sold to the motor industry. The initial design was based on an overhead
camshaft 4 cylinder 1.5 litre engine of quite advanced concept for its day, leading to a significantly higher
power to weight ratio than contemporary side valve engines commonly available. The development led to an
approach from John Benson, leading, as indicated, to the merging of their respective interests to form Aston
Martin Motors in late 1925. The new company brought in Augustus Bertelli, who was responsible for the
design of every Aston Martin model up to the outbreak of war in 1939.
In forming the new company, new premises were required and so Aston Martin moved from central London
to Feltham, until eventually the site was closed in 1960.
The initial car design produced by Aston Martin Motors was a 1.5 litre light sporting car, based on the Bertelli
engine. It was low, fast and with excellent handling, quickly establishing itself as a very capable sporting car. A
company formed by the brother of Augustus Bertelli, Enrico, was commissioned to provide the bodies. These
were manufactured on an adjacent site, and being of excellent quality, added to the car’s reputation for high
quality, though they were expensive.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:47 Page 6
THE INTERWAR YEARS THE INTERWAR YEARS
Shortly after production commenced in 1927, the British and World economies were plunged into recession
and with a general downturn in demand credit was tight and expensive and it became clear that there was
a need to re-capitalise the company and reform it. By 1929, the company was very vulnerable and it was to
continue in such a state until eventually being bought by Mr Arthur Munroe Sutherland, who, being
a wealthy shipping magnate from Newcastle, put in his son, Mr Robert Gordon Sutherland, as joint managing
director with Augustus Bertelli. These two continued to drive the company until 1947, when Mr David Brown
bought the company. The new company was called Aston Martin Ltd.
Models produced from 1929 until the outbreak of war, were all based on the original concept of a light
chassis and sporting body using a small capacity, high efficiency 1.5 litre engine. This later grew to 2 litres
with the introduction of the 2-litre model in 1936.
The initial 1.5 litre International model established Aston Martin firmly as a manufacturer of very high quality,
high performance sports cars, which could with equal felicity, be used on the race track and road. They were
eminently practical road going cars.
Aston Martin Team cars circa 1935 - Aston Martin enjoyed a successful competition history during the 1930’s,
often winning their class in many prestigious races of the era, including Le Mans.
The cars quickly established themselves on the race track at Brooklands, Le Mans and elsewhere, and their
success only added to their reputation. Based on their Le Mans success, other events led to special sporting
bodies, including a particularly elegant design first used at Dundrod in Ulster. This became known as the
“Ulster”. In 1936, the 2 litre model was added. In common with other contemporary cars of the period, the
fashion called for increasing comfort and sophistication. Weight under these demands, increased substantially.
To compensate for this, it became imperative to increase power, thus creating the need for an increase in
engine size to 2 litres. Complementing the engine, the Cotal electric pre-selector gearbox became a
standard fitment. The 15/98 as it was known, was produced in three main versions, Saloon, Tourer and Drop
Head Coupe. While the Tourer at least retained some sporting pretensions, the Drop Head and Saloon were
heavy and rather under powered, but beautifully constructed.
On the departure of Augustus Bertelli in 1939, Claude Hill was appointed as chief designer. Claude Hill’s
first task was to design a replacement for the 1.5 litre engine used in the International. The 4 cylinder design
configuration chosen maintained the overhead valves, but they were pushrod operated, using a clever
system not unlike that used in the Riley car. This enabled the use of a wedge shaped combustion chamber
and cross flow,with induction and exhaust being on opposite sides of the engine. The result was a very
respectable power output with commendable fuel efficiency.
To complement this new engine, Claude Hill also set out to design a new car. The new chassis introduced
trailing arm front suspension and the use of a rigid rear axle located by twin trailing arms and a Panhard
rod for lateral location, the whole being coil sprung. In order to make this new chassis configuration work,
Claude Hill introduced a small rectangular tube ladder framed chassis, with outstanding torsional and
longitudinal stiffness: the result was class leading road holding and ride comfort.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:50 Page 8
2 litre Speed Model, a rakish design that was typical of Aston Martin in the late 1930’s. Augustus Bertelli
eventually left Aston Martin and the motor industry, after a serious disagreement with Gordon Sutherland.
His deputy, Mr Claude Hill, who would remain with the company until 1956, assumed his role of Chief
Designer.
Engine and chassis were developed using a variety of prototype cars. First among those was “Donald Duck”,
described even at the time as a “curious looking saloon”! Chassis design was further developed with the C
Type, which was created to hone the road holding and engine. This introduced small section chassis tubes
for the ladder type chassis construction, an all enclosed radiator and integral front wings. Later came another
innovative saloon body design, known as “Atom”. It utilised some clever and very advanced unitary body
design techniques. While the styling, putting it charitably, might be described as quirky, the resulting car was,
not withstanding, light, fast and economical and with outstanding handling. The Cotal gearbox was retained.
At this point the 2nd World War intervened and production of all car manufacture ceased. Thereafter until the
war’s end, production was geared to the war effort. “Atom” went on to serve as valuable war transport for
Gordon Sutherland.
THE INTERWAR YEARS ENTER DAVID BROWN
At the end of the war, Gordon Sutherland had acquired sole ownership of Aston Martin Ltd, his father having
sold his shares to him for £5. Aston Martin emerged in a good state with excellent facilities, a sound balance
sheet and a small but skilled workforce. However, in common with much of industry, resources were extremely
difficult to acquire in order to restart car manufacture and the national effort, (requiring as much export as
possible), meant the need for a hasty design of a sporting 2 seater tourer suited for the American market.
It rapidly became apparent to Gordon Sutherland, that gearing up for this, required a level of resource and
financial backing beyond what he could provide; and with a need for a major industrial backer in order to
secure supplies of scarce steel and other materials. It was therefore with much regret that he put Aston
Martin Ltd up for sale.
The advertisement announcing the sale of Aston Martin was placed in the Times as 1946 drew to a close and
attracted only one serious indication of interest; Mr David Brown, owner and managing director of David
Brown Ltd.
David Brown, born in 1904, assumed the responsibility for David Brown Ltd in 1932 on the death of his
father, Frank, and his uncle Percy. The main business of David Brown Ltd was the design and manufacture of
gears and gearboxes, finding their way into the hulls of many warships and merchant vessels and countless
other applications. DB Ltd was and remains a nationally important company. However, David Brown also
diversified into related mechanical products, including car transmissions, superchargers and
similar products. As the 1930’s drew to a close, opportunity was taken to enter into tractor manufacture,
commencing production in 1939.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:50 Page 10
David Brown answered the advertisement in his own private capacity. He felt that it was important that the
UK had a nationally competitive sports car and being a keen motorist, shared a passion to go racing and
win at Le Mans. He saw Aston Martin as the ideal platform from which to achieve that ambition. In deciding
whether to make an offer for the Company, he test drove “Atom”, being highly impressed by its roadholding,
but felt that it was lacking in power to take advantage of the potential in the car. This convinced him that Aston
Martin would need a bigger engine and having seen the impact that the XK 120 1948 launch had, that it had
to be a 6 cylinder twin overhead camshaft engine that powered them.
The Claude Hill designed push-rod 2 Litre engine which he had developed, (in David Browns view) was not
the way forward. Consequently, he therefore sought to source an alternative engine. This he found with
Lagonda Motors.
ENTER DAVID BROWN LAGONDA MOTORS
Lagonda Motors traces its roots back to 1899, when the company was founded by Wilbur Gunn as the
Lagonda Engineering Company, beginning in a shed at the bottom of his garden to build small compound
steam engines primarily for boat propulsion. In 1900, Wilbur made his first motor cycle, sensing that with the
state of transportation, more and more were demanding the convenience and speed available from motorised
modes of transport. Initially as with so many start-up businesses, the first products were built from parts
bought in from other local light engineering companies, in this case Knights of Staines, from whom he
acquired the frames. Wilbur designed and manufactured a small internal combustion engine and adapted the
frame to fit.
The company prospered and rapidly expanded, producing a succession of well engineered and light weight
cars starting with the 12 hp of 1908, then the 14/16 hp using a bought- in 4 cylinder engine made by
Coventry Simplex, followed by a 20 hp 4 cylinder model later to be adapted to a more powerful 4 cylinder
engine of Lagonda’s own manufacture (the 20 hp,) to a new 6 cylinder model, the 30 hp of Lagonda’s own
design and manufacture.
Lagonda Motors, as it had been renamed, survived the First World War and by 1919 was back manufacturing
high quality sporting cars, concentrating in the carriage trade.
In the depressions of 1929 and early 1930’s, ownership of Lagonda Motors was passed to Mr Alan Good and
the emphasis of the company moved from high performance sporting cars, to the highest quality and luxurious
touring cars, starting with the M45, leading progressively through various iterations to the production of a V12
saloon and drop-head of the very highest quality and elegance.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:50 Page 12
DB1 - The first car that was designed with the body for production by Aston Martin. It was fitted with the
chassis and 2 litre engine design by Claude Hill. It performed well both as a road car and in competition with
the prototype car competing and winning the 1928 Spa 24 hour race for sports cars outright.
LAGONDA MOTORS LAGONDA MOTORS
Throughout this period, it had been the policy to manufacture in house many of the components and as such,
Lagonda Motors possessed a large machine shop and associated foundry. At the outset of the 2nd World
War, this manufacturing capability was transferred to the support of the war effort and car production ceased
for the duration.
During the late 1930’s, WO Bentley had joined Lagonda, initially designing and building the LG 45 and then
later V12 engined cars. As 1939 approached, he was engaged in developing a replacement model with a new
2.5 litre, 6 cylinder, twin overhead camshaft engine, the initial development of which took place in the last year
of war and 1946. The intention then was to restart car production in 1947. However, by war’s end, Alan Good
had decided to concentrate the use of these resources into small marine engine production under the trading
name Petter Diesels.
M45 Drop head - with Bodywork by Lancefield is very typical of the type of car made by Lagonda from 1934
until the onset of war in 1939
Car manufacture ceased in 1947 and design assets of Lagonda Motors were put up for sale but not the
facilities and property. Initially he asked no less than £225,000. This offering attracted a number of potential
bidders until the budget of 1947 introduced new taxation rules. The initial expressions of interest evaporated
and on learning this, Mr David Brown then made his offer of £50,000 with the intention of mating the Lagonda
engine with the chassis design created by Claude Hill and with a 2 seat Touring car of elegant design,
subsequently named as the DB1. With the design assets of Lagonda Motors also came a number of design
staff, including Chief Styling engineer Frank Feeley, who was to oversee every Aston Martin produced up
to the birth of the DB4.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:51 Page 14
THE POST WAR YEARS UP TO 1971 THE POST WAR YEARS UP TO 1971
Under David Brown’s ownership, Aston Martin was for the first time funded to develop and manufacture cars
on a significant scale. A dealer network was created, a service centre provided and a full sports racing car
programme put in motion. Sales rose, but never seemed quite sufficient to cover the full cost of development
and manufacture. The adoption of the WO Bentley engine led to an early break by Claude Hill, in a serious
disagreement with David Brown. His departure led to the promotion of Harold Beach who took charge of
chassis design under the tutelage of Robert von Eberhorst, late of Auto Union, who was appointed Chief
Engineer.
David Brown’s reason for purchasing the Lagonda Company.
Engine development came under Mr Tadek Marek and initially the DB2 engine was progressively modified
to increase power. An increase in size followed to 2.9 litres and after a number of design problems were
rectified, it powered the DB2/4 from 1954.
The DB2 - powered by the 2.6 litre LB6 engine, established the international reputation of Aston Martin as a
manufacturer of cars of the highest performance and comfort.
The DB2/4 was designed in the 2 plus 2 format, that was to endure through all subsequent models. An
innovative hatchback design, it proved a popular choice for the discerning wealthy, but by 1956, was
becoming increasingly outdated and it was clear that an all new model was needed. The DB2/4 was
developed progressively until this car was ready, with the DB2/4 Mk II and then with a much revised body,
in DB2/4 Mk III form. The LB6 engine was also modified to overcome a number of other design issues and to
increase power and torque and emerged as the DBA in 3 litre form with a heavily revised cylinder block
and head.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:54 Page 16
By 1956, Harold Beach was hard at work designing a new platform chassis, Tadek Marek was fast
developing a new engine and Touring of Milan was engaged in styling an all new body. The new model
became the DB4.
The DB4 was first shown to the public in late summer 1958 to instant acclaim. The platform chassis had been
intended to use a de-Dion rear suspension, but for reasons of development and production cost, this concept
was shelved and it emerged with a well-located conventional rear axle.
The body used the Superleggera construction concept of light steel tubes supporting an outer body shell that
was both light and strong. By 1958 the engine had grown to 3.7 litre capacity and as foundry capacity was
only available in aluminium, emerged as an all alloy engine.
The DB4 set the world alight, reinforcing Aston Martin as a sports car manufacture of the highest
performance, elegance and quality. It was a truly iconic model.
By the time the DB4 was announced, John Wyer had become General Manager and set about developing it
for production and to radically improve its early reliability. The DB4 was to progress through 5 distinct design
series before finally emerging in DB5 form as a fully developed and reliable 4 litre car.
The model when all of the problems encountered with the earlier years of DB4 production were finally
eradicated. The resulting car not only had very high performance and road holding for its time,
but was superbly refined and proved it was a reliable performer and capable of sustained very high speeds
in great comfort.
In 1957, the decision was taken to leave Feltham and to move all design and production to the old Tickford
Works at Newport Pagnell. The move was to prove highly disruptive with many key workers refusing to move.
In consequence there was a significant delay in the production of the DB4, which meant that the first
cars were unavailable to the public until late 1959.
By 1964, it became clear, as a result of customer demand that better rear seat accommodation was required
and an all new replacement was needed. This development was to spawn the design of an all-new V8 engine,
designed by Tadek Marek, and heavily revised platform chassis, designed by Harold Beach, which
at long last would use Aston Martin’s de-Dion rear axle. Body design was entrusted William Towns. To cover
the interim before the car was ready, the DB5 was revised with a longer wheelbase, revised roof profile and
improved aerodynamics, becoming the DB6 that was to continue in production until 1970. The DBS was
announced in 1968 to wide acclaim, but as the V8 was unavailable, used the existing 4 litre engine fitted to
the DB6 that continued in production alongside.
THE POST WAR YEARS UP TO 1971 THE POST WAR YEARS UP TO 1971
DB MkIII book latest copy 2:Layout 1 2/12/10 11:54 Page 18
BCHANGE OF OWNERSHIP CHANGE OF OWNERSHIP
y 1971, the cost of the all new DBS, unfavourable trading conditions and under pressure from David Brown
Ltd shareholders, David Brown sold Aston Martin to Company Developments. The new managing director,
William Wilson set about taking cost out of production and realising as much of the asset base as possible, so
that a sufficient amount of working capital could be made available to sustain production. The V8 was
introduced in the DBS in 1971, just as the fuel crisis was hitting its zenith; unfortunate timing was just one of
the reasons why the number sold never matched projections. Production continued in fits and starts as funds
could be made available until finally the company was declared insolvent in 1975.
In July 1975, two American enthusiasts, Peter Sprague and George Minden (and shortly afterwards Alan
Curtis and Dennis Flather), bought the company and took operational control. After further fitful trading, the
company was again sold in 1980, this time to Victor Gauntlett, who, as Chairman and Managing Director
steered the company until finally securing its long term survival, when the Ford Motor Company bought Aston
Martin in 1987.
The V8 Vantage and Volante introduced in 1979 - 2 models that the funding and recapitalisation provided by
the new owners enabled and that secured Aston Martin’s future for a few more years.
By 1984, it was clear that a new model was urgently needed to replace the V8 in Vantage and Saloon form
and development of the Virage commenced. The platform chassis was revised and electronic controlled fuel
injection introduced. The new body design was entrusted to John Heffernan and John Greenley. The Virage
was announced in September 1988 with the introduction of the Volante drophead, Vantage and V8 Coupe
form. Production finally petered out when superseded with the announcement of a replacement in 2000.
Picture of Virage - the new model Virage that enabled Aston Martin to stay in business during the early 1990’s
and which with Ford’s help secured a production base at Newport Pagnell and helped provide the essential
continuity of the Aston Martin tradition into the future.
In 1990, Ford announced that the new MD was to be Walter Hayes, who immediately commissioned the
design of an all new model. The design brief was to create a beautiful smaller coupe that would attract a
significant increase in demand. To make it affordable, it would have to adapt already developed major
components in an all-new body. The foundation chosen was the Jaguar XJS platform and AJ6 engine in
supercharged form. Ian Callum was entrusted with the new body design and development and production
was entrusted to TWR of Bloxham, Oxfordshire, under Chief Engineer Rod Mansfield. A new company Aston
Martin Oxford Ltd was formed for the purpose. In 1993, Sir David Brown became life President of Aston
Martin Lagonda and gave his permission for the new model to be known as the DB7.
The DB7 was announced in 1994. In 1999, the V12 DB7 Vantage was introduced to replace the V8 Coupe.
In 2001, the Vanquish was announced. It was to be assembled at Newport Pagnell. In 2003, Aston Martin’s
new production facility at Gaydon was opened and in 2005, DB9 production commenced, under the
leadership of Dr Ulrich Bez, the new Chief Executive.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 20
CHANGE OF OWNERSHIP CHANGE OF OWNERSHIP
In 2006 the new Vantage V8 was announced, a smaller cousin to the DB9. In 2007, it was announced that
Ford wished to dispose of Aston Martin. A consortium comprising Kuwaiti investors and David Richards of
Pro-Drive, purchased the company. David Richards became Chairman of Aston Martin and Dr Ulrich Bez
continued as Chief Executive.
The DB7, the car that finally transformed Aston Martin from a cottage industry into a medium sized
international manufacturer of GT cars.
Walter Hayes created the DB7 that secured Aston Martin’s future finally for the long term. Dr Ulrich Bez that
built so successfully on that foundation and that led to the DB9, Vantage V8 and which finally made Aston
Martin a major competitor to the likes of Porsche and Ferrari.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 22
ASTON MARTIN IN COMPETITION ASTON MARTIN IN COMPETITION
By 1962 all racing interests had ceased and the company was not to get involved with a full factory racing
team again until the mid 1990’s, when in conjunction with Lola, a factory team was reinstituted for the Le
Mans series. Limited success followed, but they were in competition with the Jaguar Silk Cut Team, and
limited development funds and the high fuel consumption of the V8 were major factors inhibiting success.
Finally in 2005, Dr Ulrich Bez announced an agreement with Pro-Drive to race specially modified DB9 cars
(known as the DBR9) in the Le Mans series races in the USA and Europe. Success followed in the GT1
class, against the major competition from the Corvette Team of General Motors. In 2007 Aston Martin finally
won the GT1 class at Le Mans with a 1, 2.
Afull racing programme was instituted under John Wyer in 1949. The brief given by David Brown was to be
delightfully simple, win at Le Mans. The DB2 proved a very competitive car and in 1950, the team consisting
of three DB2 works entries came 5th and 7th overall and first in the 3 litre category.
More success was to follow in 1951 with 2 specially lightened DB2 works entries, the lead car coming in
3rd, the other 5th and a privateer 7th. It was to prove a high point in the Le Mans for a number of years.
By 1952, the DB3 was ready but never proved fully competitive nor adequately reliable. The DB2 continued
to be campaigned with conspicuous success, but its competitiveness in the top echelons was becoming
impossible to sustain.
To overcome the disappointing performance of the DB3, a revised design took shape, to reduce weight and
drag, this being the DB3S. One of the prettiest sports racing cars of all time, it proved instantly competitive
but not always reliable. However, this car proved that Aston Martin were up with the best of the rest of the
world, attracting the best drivers and leading to conspicuous success in all of the main racing circuits of
Europe and the USA, except at Le Mans.
As 1957 approached, it became clear that the LB6 engine was reaching its maximum potential, and an all new
engine and chassis was needed to win. This led to the development of the DBR1. Its engine was designed by
Tadek Marek, Ted Cutting was entrusted with chassis design and Frank Feeley designed the body. The
engine design was initially developed to a 3 litre design brief, but from the outset, Tadek Marek built in the
development potential to increase engine size up to 4 litre capacity.
The DBR1 was prepared in 3 litre form using the RB6 engine, and proved instantly successful. Among notable
successes was the winning of the 1000km Nuerburgring race, in 1957, 1958 and 1959. Failure occurred at
Le Mans both in 1957 and 1958 but 1959 proved the high water mark for Aston Martin’s racing programme
when they finally won Le Mans and the World Sports Car racing championship. The DBR2, a DBR1 with
an engine of 4 litre capacity was also campaigned successfully, but not being eligible for the World Sports
car racing series, was raced in North America and a number of other unrestricted races in Europe with
reasonable success.
There was a brief foray into the world of Formula 1 with the DBR4 in 2.5 litre form. In reality, Aston Martin
entered Formula 1 at least a year late and the cars were seldom competitive, particularly following the
introduction of the rear engined Cooper and Lotus F1 cars. The DBR4 was campaigned in 1958 and 1959,
but by then, it was very clear that it was not going to win. The DBR4 proved a major distraction to the Sports
Racing car programme, and this was a major contributory factor in the relative failures in 1957 and 1958 at
Le Mans.
With the winning of the Sports Car Championship in 1959, David Brown announced the official withdrawal of
Aston Martin from competition. In reality, Aston Martin continued to keep a small racing team together. A new
car, Project 212, was designed and built to race at Le Mans. Some success followed, but the Ferrari GTO,
which was the car to beat in 1960, 1961 and 1962, relatively outclassed it. Two other Project cars followed,
most notably Project 215, which was the fastest car recorded down the Mulsanne straight. The company
also went racing with the DB4 GT with success, though it rarely won races consistently.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 24
CHAPTER TWO
The DB2/4 MkIII - A Car for All Time
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 26
Based on what became known as the DB1, the DB2 design brief
was for a car capable of winning the World Sports Car
championship at Le Mans. David Brown took a strategic decision
that a new engine would be required, preferably 6 cylinder of at
least 2.5 litre capacity. Additionally, it would need to be good
looking, streamlined and modern in concept, with excellent road
holding and race worthy. Lightness would be a key issue and to
that end, the body had to be in light alloy. Furthermore, the
chassis would need to be rigid, yet light. Following Jaguar’s
exciting new “XK” twin overhead camshaft engine that was
launched with the announcement of the XK120 in 1947, David
Brown quickly concluded that nothing less was suitable for his
new car.
Designed first and foremost as a high performance sports car, the
design brief specified only two seats, with only passing regard
being given for luggage. In practice, most drivers stowed their
luggage behind the driver and passenger.
The design specification required therefore, an engine with high
specific output, with a twin overhead camshaft configuration of
2.6 litre capacity and with growth potential beyond. To obtain the
speed and hence power that would give race winning speeds,
power out put would need to be well in excess of 100 bhp in race
tune.
Chassis design was to be based on a lightweight but very rigid
form of space frame, and was to utilise the front and rear
suspension design demonstrated so abley by the ATOM and also
by the highly successful Aston Martin special that won the SPA
24 hour sports car race outright in 1948. To that end, the trailing
arm front suspension was to be continued and with a well located
rear axle utilising twin trailing arms and Panhard rod for lateral
location.
This design brief was one that the then Chief Designer Claude Hill
felt he could meet with his own car design, and that in particular,
his 4 cylinder engine could be readily developed to provide the
high power need to achieve race winning potential. It was quite
clear that there was to be no meeting of minds with Aston
Martin’s new owner, and Claude Hill left the company and a new
chief designer, Harold Beach was appointed to lead the new car
design.
DB2 DEVELOPMENT HISTORY
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 28
DB2 DEVELOPMENT HISTORY
CHASSIS DEVELOPMENT
SUSPENSION
The design of the DB2 body was entrusted to Frank Feeley, late of Lagonda. Developed from the DB1 car, it
featured a fully integrated frontal design, revised radiator grille, with the bonnet and front wings opening in unit
and pivoted at the front, thus affording excellent accessibility to engine, front suspension and steering.
The car body and rear was in unit and streamlined.
The body and bonnet assemblies were fabricated in aluminium alloy, with a steel tube bracing structure to
provide support and rigidity to the bonnet assembly. The sills, A and B posts were constructed in steel to
impart a strong foundation for the aluminium body shell, and this steel structure was then bolted and welded
to the chassis..
Handsome and workmanlike, it gave the DB2 a lithe, light and handsome appearance that was functional,
elegant and modern in concept. It was also a very well balanced design.
In 1950, the DB2 Drop Head Coupe was launched, of which some 98 examples were built, until superseded
by the DB2/4. A 2 seater, it is a very elegant design, particularly with the hood down.-
The key objective for the DB2 chassis was to provide a significant additional amount of longitudinal and
torsional rigidity, in the interests of ensuring class leading road holding and handling. To achieve that, the main
chassis longitudinal structure was doubled to impart a greater depth in the main sill sections and cross
braced. To provide additional torsional rigidity, the scuttle structure integrated the A posts, double skinned and
cross-braced.
DB2 DEVELOPMENT HISTORY
The upper sections were led forward from the scuttle fabrication and heavily cross-braced, this giving excel-
lent torsional bending properties. The sill bracing was welded to the scuttle assembly thus providing excellent
stress transference for the front suspension loads.
The main rear suspension loads were taken from the rear suspension coil spring mountings, which were in
turn supported by a strong, cantilevered structure that led from the deep sill beam assembly.
The chassis sections were constructed form high strength steel, utilising small cross section rectangular steel
tubes. The resulting structure was both rigid and lightweight, thereby fully satisfying the design brief.
Much of the suspension and steering assembly design was developed and trialled in the prototype car ATOM,
which was used as a test bed, and which, David Brown having driven, convinced him that this was a car
design with real promise and ability. The design was carried forward and developed for the DB1, and in turn
the DB2. Meanwhile, a racing chassis had been developed and as a private entry, entered into the 1947 Spa
24 hour race for Sports and racing cars. Known as the SPA special, it was privately prepared and entered
and against significant competition from pre-war Delahayes, Maseratii and others came way with the honours.
The design concepts that led to the choosing of a trailing arm front suspension design stemmed from a
concern to reduce unsprung weight, to provide a good degree of roll resistance and minimal change in
camber angle regardless of front suspension deflection.
One of the advantages of a railing arm suspension was that it provided a high roll centre thus naturally
reducing roll.. In addition, the integration of a torsion tube with the lower trailing arm mounting gave added roll
resistance.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 30
The upper trailing arms were created from the lever arm dampers.
The lower trailing arms were splined into the front anti-roll bar, the
torque tube being contained within a cylindrical aluminium casing
and pivoted at either end with roller bearings. The kingpin
assemblies were conventional and adjustable for king pin
inclination.
Steering was effected with a cam and roller Marles steering box,
leading to a set of complicated divided steering track arms, the
whole designed to minimise the effects of roll and bump steer.
The conventional rear axle was suspended with coil springs and
located fore and aft with twin trailing arms, following design
principles developed with the ATOM. Transverse loads were
controlled using a Panhard rod. Taken as a whole this provided
excellent fore and aft, torque and lateral location and control.
Damping was provided with conventional lever arm shock
absorbers.
The design realised significant handling and road-holding benefits
over the then standard leaf sprung suspension in common use. It
also endowed the car with a general agility and cornering ability to
ensure that as a GT racing car, it would be highly competitive in
Sports and GT events of the time.
CHASSIS DEVELOPMENT
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 32
DB MkIII book latest copy 2:Layout 1 2/12/10 11:55 Page 34
ENGINE AND TRANSMISSION DEVELOPMENTS
The engine design owes its origins to ideas developed by WO Bentley, while he was Chief Engineer at
Lagonda Motors during the mid to late 1930s, and after he had departed from Bentley, following the takeover
of Bentley Motors by Rolls Royce. His brief was to conceive of an engine design for a post war world.
Realising that materials and fuel would be in short supply and costly, it was felt that a modestly sized engine
was required and this led to a design based on an engine capacity of 2.6 litres, which would run on the low
80 Octane “pool” petrol than available. It was also agreed that it should be a 6 cylinder design.
Refinement was central, as also a high power to weight ratio. As a consequence, the design brief stipulated
twin overhead camshafts, with generously sized inlet and exhaust valves inclined at a 60 deg included angle
into a hemispherical combustion chamber. It was well known at the time that to achieve a high degree of
refinement, while minimising weight, required a rigid crankcase and generously sized bearings, particularly as
it was felt in the interests of economy and complexity, that a four bearing crankshaft design would be utilised.
To allow excellent cooling and minimise weight, a wet liner design was adopted, using bottom-seated liners,
which could then be clammed down by the cylinder head.
The crankcase design principle was that if each main bearing could be contained within two split
hemispherical aluminium segments, which could then be inserted into the crankcase housing with a light
interference fit when cold, it would create a highly rigid assembly hot, as the iron casting of the
crankcase/cylinder block would expand noticeably less than the aluminium bearing housings. The heavy
clamping loads thereby created, it was hoped would lead to a very rigid assembly. The idea was excellent in
theory, but over time, fretting occurred in service and the clamping loads decreased, leading to problems.
The launch of the DB2/4 led to an inevitable increase in weight and to counteract the capacity of the engine
was increased from 2.6 to 2.9 litres. In this guise, the standard engine developed up to 140 bhp in 3 litre
form., and endowed the DB2/4 with a maximum speed of close to 120 mph and a 0 to 60 time of 10.5 secs,
these being close to the recorded performance figures for the DB2.
The increase in engine capacity was achieved by the offsetting of alternate cylinder bores about the centre line
of the engine and using modified connecting rods to compensate.
The Vantage engine
An uprated 2.6 litre engine was offered as an optional extra on the DB2. It was fitted with modified inlet
manifolds and ports, increased 8.0 to 1 compression and bigger 1 ¾ in SU carburettors. Known as the
Vantage engine, it increased peak engine power from 105bhp to 125 bhp, a useful increase and gave
noticeably improved acceleration.
The Vantage engine was carried over to the DB 2/4 in both 2.6 and 3 litre variants.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:56 Page 36
TGEARBOX
David Brown was insistent, as a major gear manufacturer that it was to be his firm’s own gearbox that would
be used in the DB2. As was common with nearly all car manufacturers of the late 1940’s, the design brief
stipulated 4 speeds, with synchromesh on 2nd, 3rd and top. In service experience was mixed. Used in racing,
the gearbox quickly gained a reputation for unreliability and difficult gear changing.. In service the gearbox
proved satisfactory, but was never considered to be as good as the other aspects of the car. A complicated
column gear change mechanism was designed of doubtful quality in the DB2 and DB2/4 that followed, in
conformance with a practice adopted across the industry, in the drive to export as many cars as possible to
America. These were soon discarded and the more usual central gearlever position was re-adopted.
BRAKING SYSTEM
The brake design was chosen, very much with racing in mind. Generously sized drum brakes were adopted,
with excellent cooling which gave for the time an excellent resistance to fade, following hard use.
Alfin brakes were chosen, utilising aluminium drums with cast iron inserts for brake liners. Front brakes were
both leading and trailing. The rear brakes utilised a fully floating design concept, the whole resulting, for the
time with a car with exceptional braking ability.
OTHER DB2 DEVELOPMENTS
THE DB2/4
THE DB2/4 THE DB MKIII
. he DB2/4 became one of the very first cars to offer such a facility and it proved an immediate hit with the
customer. The result was and is a very practical and convenient solution.
The DB2 came with a divided front windscreen. With the DB2/4 about to be launched, the divided wind-
screen was discarded in favour of a full width curved windscreen, taking advantage of developments in the
manufacture of toughened Triplex glass.
Anticipating that demand would increase above those for the DB2, also prompted Aston Martin to contract
with Mulliners in Birmingham for the manufacture and assembly of the bodies, and in turn, they re-engineered
aspects of the body design. Among features that they introduced were cast alloy sills, changes to the A and B
posts and updating of the interior seating.
Engine developments
Moves to increase the size of the engine initially grew out of the racing programme. It was felt that an increase
in the cylinder bore would be the most practical way to go, but as money for a new engine block casting
could not be afforded, the increase in the bore could only be achieved by offsetting the liners to fit. The
resulting increase was small but useful, with engine capacity rising from 2.6 to 2.9 litres..
The bore offsets was initially accommodated on the connecting rod gudgeon bearings. The end result was a
calamitous failure, prompting a redesign. Instead the 2.5 mm offset was accommodated at the crankpin end,
which proved durable.
Usable power then rose from 120 bhp to near 140 bhp, thus satisfactorily offsetting the weight increase
following the body redesign.
The special Body DB2s and DB2/4s
There have been a number of DB2 and DB2/4s which,, at the request of the Carrossorie concerned, have
had chassis delivered, upon which they have constructed their own bodies to special order. These include in
Europe; Graber of Switzerland and Vignale (2 of which were originally built but only 1 example is now thought
to exist). In addition there was Arnolt of the USA who created a particularly nice 2 seater roadster body. These
roadster bodies were designed and constructed by Bertone to a design commissioned by Arnolt.
In all, there were some 17 special bodied cars, of which a total of 5 were constructed using the DB2 rolling
chassis, with the remainder on DB2/4 rolling chassis.
In 1953, the chief designer, Eberan von Eberhorst, left Aston Martin to rejoin Auto Union and a young but
highly competent engineer, Tadek Marek, took his place.
By 1954, John Wyer was appointed General Manager, and with it, he started a world wide tour of Aston
Martin dealers. The message that clearly came back was that the DB2/4 in its present shape was selling
reasonably well, but that its replacement would be needed as soon as possible, if sales volumes were to be
maintained.. As there was no prospect of its replacement being ready before 1958, a revamp would be
needed as an interim measure. This led to the design brief for the DB 2/4 MkII and MkIII.
The DB2/4 MkII should be seen as interim step to introducing the Mk III, and with its introduction, body
manufacture was moved from Mulliners to Tickfords in Newport Pagnell.. Tickford had been in the coach
building business since the dawn of motoring and had a long and proud association with the British
coachbuilding industry. Their current customer, Alvis was phasing out the 3 litre and as Alvis was entering
discussions with Willowbrook to construct a new body designed by Graber of Switzerland, an opportunity to
use the facilities and skill in Newport Pagnell for future Aston Martin manufacture beckoned.
Another innovation for the time was the fitment of 2 speed self parking windscreen wipers.The DB2 was further developed as a 2 seat drophead coupe of particularly elegant design. The designconcept and general design of the hood was to be one that Aston Martin broadly continued with right up to
the launch of the DB7 Volante. The hood was unlined.
Within a year of the launch of the DB2, owners were already saying that they would like 2 additional seats so
that they could take their family as well. It was also apparent that this would significantly widen the appeal of
the car, and with it, bring an increase in sales.
Recognising that this would also add weight, Aston Martin were prompted to start a model development in 2
key areas, these being to add 2 additional rear seats and an enlarging of the engine capacity to support an
increase in engine torque and power.
The first element required that the roof height was increased and extended allowing the inclusion of 2
occasional seats, that would be suitable for children or which an adult could sit on for short distances. While
the increase in roof height was relatively easy to design, the rear of the body design posed real problems until,
in a brainwave, Frank Feeley, the body stylist and designer, had the idea of an enlarged opening rear window,
creating one of the world’s first hatchbacks. The hatchback style opening rear window allowed easy access to
the space behind the rear seats, bringing with it convenience and space for the family luggage.
DB MkIII book latest copy 2:Layout 1 2/12/10 11:56 Page 38
Of Polish origin, Tadek Marek’s first task was to re-engineer the design of the engine, to deal with a number of
significant problems. These included significant modifications to the engine block, improving cylinder head
port design to enable bigger valves to be used and use of a 14mm plug in place of the previous 10mm. Also
included was an uprating of the engine oil pump, as a means of increasing oil pressure and an increase in
sump capacity. In addition the crankshaft was modified to increase its stiffness and improve case hardening,
all of which was aimed at enhancing smoothness and reliability. These and other modifications stemmed from
hard won racing experience. An overdrive was offered for the first time, reflecting and anticipating more
modern fast road design.
The major changes included a new bonnet and grill, interior trim improvements and a much improved and
elegant dashboard and instrument panel.
At the rear, the shape was tidied and better integrated, with “cathedral” type rear lights,
The new grille, reflecting the design of the DB3S, was the work of Frank Feeley and was a marked
improvement and so came about the key design cue that has remained with Aston Martin to this day, giving
the marque instant recognition across the world.
The same styling cue was mirrored in the instrument panel design, another feature that was to endure through
to the introduction of the DBS and V8 era.
The end result was a most delightful and elegant car. Sales recovered.
The chassis itself would remain essentially unchanged, but a big improvement was made with the brakes, with
the introduction of front wheel disc brakes. At a stroke, one of the few concerns, namely a tendency for brake
fade following hard and continuous use was eliminated and a tendency after some in service use, for uneven
braking banished.
THE DB MKIII ENGINE REDESIGN
THE UPDATED DB MKIII BODY
DB MKIII CHASSIS AND SUSPENSION CHANGES
DB MkIII book latest copy 2:Layout 1 2/12/10 12:01 Page 40
CHAPTER THREE
History and Restoration of a DB 2/4 MK III
DB MkIII book latest copy 2:Layout 1 2/12/10 12:01 Page 42
HISTORY OF DB2/4 MK III - REG NO: WYE 847
AM/300/3/1815 ENGINE NO: DBA/1404
This an unusual car in that it has almost a continuous history since the date it was first
registered in 1959. The purchaser of the Aston Martin was the Africore Mining Company
of Berkley Square , London. We can be fairly sure that its first user would have been
most probably the then Managing Director or Chairman. Its date of first registration and
delivery was the 24 April, 1959 and was supplied direct from Aston Martin.
The build sheet for the car shows that it was a standard non-overdrive car, and painted
originally in Sea Green with White gold leather upholstery. We can be fairly sure that this
would have been to special order. Unusually, there were no recorded options purchased
with the car.
Service work carried out during its first 17,000 miles cover both routine servicing, but
interestingly makes reference to the Gearbox 1st gear and layshaft being changed after
no more than 10,000 miles.
It appears that after 17473 miles, the car was repaired following an accident and the car
was re-cellulosed in Snow Shadow Grey. At the same time a steering box oil seal was
replaced. And by 17982, miles the car was fitted with its second set of new tyres.
Perusal of the duplicate green registration document suggests that the car was retained
by the Africore Mining Company until 5 January , 1962, when it was sold to a Mr Hugh.
R. Hutton of Kings Road, Chelsea, London. The next recorded event is March, 1966,
when the car was registered in the name of Mr MJ Garbutt of Guildford, being a motor
trader. In 1967 the car was again sold, this time to Mr KJ Conyers also of Guildford. A
few months later the car was again sold to Mr JW Herring, AMOC Membership No.
2789, of Leatherhead, Surrey, the time being January, 1968. John Herring used the car
from purchase in January 1968 to August 1968, then as he had another DB2 he decided
to set about the renovation of WYE 847. Work was started and considerable work was
completed as detailed in John Herring Notes, however due to family, work and home
changes, the renovation was never completed and the car essentially remained unused
until the car was sold to Mr Ronald D. Powell, AMOC No. 23792, the present owner, in
July 2009, 41 years later.
As stated above, following the initial use of the car, John Herring embarked upon a full
restoration and the following brief summary are based upon his notes, which are long,
comprehensive and detailed. Copies of these notes are in the Annex along with detailed
notes of what was purchased and a running list of expenditure. The scope included
chassis, suspension, wheels, steering, engine, body, electrical, brakes, transmission and
trim. Detailing of the engine bay and chassis was a primary objective, as was a strong
desire to overhaul the mechanics, including engine, suspension, brakes and electrical
systems.
EARLY RESTORATION
DB MkIII book latest copy 2:Layout 1 2/12/10 12:01 Page 44
BThere is a general reference to bodywork refurbishment, the bodywork being given to Robert Laidlaws of
Wembley, which was completed December 1970 for the sum of £120. Work included replacing or repairing
door skins, side panels, bonnet and sills. In addition, it provides details of re-upholstering, and general
refurbishment of the interior, including leatherwork, carpets and headlining.
The engine was given a comprehensive overhaul and at the same time steps were taken to measure bore
wear and to assess the general condition of pistons, liners and and crankshaft. With the engine reassembled
and block repainted, there is a reference to the fitment of a new gearbox complete with an overdrive supplied
by SE Robinsons of Bedford. It is worth noting that adaptation of the original gearbox is difficult, as to fit an
overdrive requires replacement of the gearbox main-shaft, a new adaptor plate between gearbox and overdrive
unit, eccentric cam to power the overdrive oil pump and different gearbox change linkage. Other detailed
notes refer to a variety of items, including stainless steel exhaust, enamelled exhaust manifolds and numerous
gaskets etc. There are further detailed notes of the itemised costs made in 1968, which make for interesting
comparison in later years.
The suspension overhaul included new king pin bearings, as well as detailing the front and rear suspension
with polished front spring towers and cadmium plated front and rear suspension springs. Other items
attended to included the brakes, with overhauled front callipers, new rear brake shoes, master cylinder and
new brake hoses.
There is correspondence between Mr Herring and several companies who were requested to supply
replacement chromed spokes for the wheels.
In 1974, further serious engine work was undertaken, this time with the dismantling of the entire engine and
on this occasion fitting new pistons, rings, main and big end bearings. At that time an attempt was made to fit
an anti theft system, but the installation proved unsuccessful.
y 1995, Mr Herring was resident in Truro and not unsurprisingly, the body was showing its age and much in need
of comprehensive restoration. The bodywork was entrusted JR Pryor’s in Truro. The notes indicate replacement
of the sills on both sides, stripping of all paintwork, cutting out and removal of any corroded aluminium from the
sponsons panels each side, a common area, as also front and rear wheel arches. Replacement of the bonnet
hinges was another common area for corrosion damage and these were replaced. After detailed panel
preparation to remove numerous dents, the body was primed, and repainted in British Racing Green. At the
same time, the underside was undersealed with black Shultz. The cost of all this work was £1000.
Bumpers front and back were also rechromed. Opportunity was also taken to carry out a further top overhaul on
the engine.
Mr Herring kept copious notes of what he did and these are in the in the Appendix.
By 2001, Mr Herring was again resident in West Sussex and the records show a number of routine
replacement parts which were invariably obtained from Aston Service Dorset and in more recent years from Tim
Stamper. The Build sheets were obtained from Aston Service Dorset who also authenticated the car’s origin and
date of manufacture.
In 2009 Mr Herring regretfully determined that the car should be sold, as he himself had moved into a retirement
home. The car was then advertised and duly purchased by Ron Powell in June 2009. On purchase, the body
itself remained essentially original and in sound condition. The interior had been refurbished and restored with
new beige leather and carpets, while at the same time, the car had been stripped and repainted in British Racing
Green.
Visit to Works Service – July 2009
At collection, July 9th 2009, the car was taken to Works Service in Newport Pagnell for recommissioning,
detailed check up, brake and suspension overhaul and attending to a major engine water leak, which
necessitated removal of the cylinder head. The radiator was also reconditioned and an MoT obtained. When
examined by Works Service, the single greatest concern was the major water leak, where it was feared that the
cylinder block had been severely damaged. Other problems, consistent with a long period of storage, included
binding brakes, leaking brake cylinders, water pump leak, weeping shock absorbers and the inevitable electrical
gremlins, these items were all attended to.
The major water leak turning out to be caused by 2 failed core plugs, nether of which was evident without
removal of the cylinder head. The car was presented to Ron Powell, Wednesday evening October 21 2009, and
a test drive provided by Gordon Higgs Newport Pagnell’s Works Service Heritage Driver.
A good 100 mph was achieved in a very short time ..... stunning!
The car was then handed over to Ron for his first Drive.
After this first Drive, a diary of Daily Use Notes has been kept and these can be referred to in a section later in
this book.
MAJOR BODYWORK
NEW OWNER
EARLY RESTORATION
DB MkIII book latest copy 2:Layout 1 2/12/10 12:01 Page 46
Visit to Aston Workshop - April 2010
In April of 2010 and after only 1138 miles, it became evident that the cylinder head gasket had failed, engine oil
leaks were substantial and there were other snags, all of which required attention. It was decided that the best
course of action was to entrust the car to the Aston Workshop. On removal of the cylinder head, it became
immediately clear that the cylinder head would require re-facing. Another problem revealed itself, namely water
leaking past a number of valve guides. A loose plug in the main oil gallery within the cylinder head, created
another major oil leak. Given that rectifying these problems would necessitate a substantial rebuild of the cylinder
head, it was readily agreed that an unleaded conversion should be undertaken.
Items of paintwork, detailed fettling and general tidying were undertaken. This included the welding up of
mounting holes in the offside wing from a previously fitted wing mirror, typical of the numerous snags that were
dealt with at that time.
Notes on the unleaded conversion
When the DB Mk III engine was developed, the cast iron cylinder head was modified with enlarged, better
breathing inlet and exhaust ports, a 16mm plug, but in so doing, Tadek Marek as Chief Engineer, deleted fitment
of valve seats, to minimise the scrapage rate while machining the cylinder heads during manufacture. Being cast
iron, the quality of the valve seating was perfectly acceptable during the era of leaded fuel. However, with the
banning of leaded fuel, except through a few authorised sites, the dangers of valve seat recession became
significant. To counter this problem, it is possible to use lead substitute additives and these can be generally
acceptable for normal road use provided high and prolonged engine speeds are avoided.
To provide a long term solution, it becomes necessary to fit hardened stellite valve seats and valves and to
replace the valve guides with ones made with phosphor bronze. The risk with the DBA engine is that the casting
thickness in the vicinity of the exhaust and inlet ports can be thin and consequently, when fitting valve seats, the
thickness of the head casting is such that there is a real danger of cracks developing between valve seat and
spark plug, leading to valve seatings detaching and leakage of water into the cylinder. In addition, over time,
water can also leak past valve guides for the same reason. A replacement cylinder head is now available,
manufactured in aluminium that has been designed to eliminate all of the DBA head design weaknesses.
However, it can be possible to modify the existing cylinder head, provided care is exercised. In this case the latter
course was chosen and the conversion was completely successful. Parts fitted or replaced included the valve
seats, valves and guides and of course a complete cylinder head gasket set.
Since being collected from the Aston Workshop in late May, WYE 847 has performed faultlessly. As an overdrive
fitted car, it has the ability to cruise comfortably at motorway cruising speeds quietly, comfortably and with
surprising economy and this capability its new owner, Ron Powell has taken full advantage of. On its first long
distance trip, Ron noted that he averaged close to 70mph and achieved close to 30 miles per gallon. The authors
experience with a near identical car demonstrates this is no fluke. Needless to say its new owner is delighted and
much looking forward to many more miles when he has the time.
Illustrated on following page WYE 847 on test at Beamish driven by Keith Slater.
DB MkIII book latest copy 2:Layout 1 2/12/10 12:01 Page 48
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 50
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 52
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 54
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 56
June 2009
Aston Martin Owner Club Monthly Magazine issue No. 716.Page 50 Cars for SaleAdvert 2 1959 DB Mark III by John Herring
Wrote to Seller seeking details
Received Cover letter and 5 pages Notes
Tuesday 16 JuneTelephone discussion of visit appointment
Wednesday 17 JuneTo Home of John Herring in SurreySale / Purchase agreedAgreed for Ronald D. Powell to become the Keeper of Aston Martin DB IIIReg No WYE 847
Thursday 18 JuneAndrew McCloskey Aston Martin Works Service Newport PagnellArrangement of collection of DB III for 9th July, aproximately 1.00 pm
Monday 22 JuneFunds for Payment of DB III sent from National Bank of Abu Dhabi toBarclays UK.
Email confirmation of collection request to Andrew McCloskey AstonMartin Works ServiceNewport Pagnell.
Tuesday 23Cheque of payment sent to John Herring, dispatched via SkyEx / Dhl.
July 2009
Wednesday 8thTo Newport Pagnell Swan Hotel
Thursday 9th to Weybridge
DB Mk.III Documents Receive
New Key Ring Pds 10.00Car Parts loaded into Car
DB Mk.III remove from GaragePushed car to Loading AreaDB Mk. III loaded onto Carrier for onward transport to Aston Works ServiceNewport Pagnell
5.00 Aston Works Service Newport PagnellWorks Heritage Kevin MooreDiscuss of things to be done, Visual over Car
Number Plate Backing/Holding Plate collected from David Herring deliv-ered to AM Works Service
Tuesday 14Received email from Works Heritage, Kevin Moore, and my reply
We have had your vehicle running and carried out our initial check over andwould like to report the following :-
MOT failure items.Front windscreen wipers do not clear the windscreen. Require replacement.....Reply Please replaceFront number plate missing. .....Reply Number Plate is in rear of Car wrapped in old newspaper, I put itin there,Number Plate Holding bracket sent to you via courier and received asadvised to me by Andrew.,Brake lights do not operate. Requires investigation as bulbs are both ok.Rear lamps units have faded badly and do not emit a red light......
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 58
Reply If this an MOT fail point then please replaceNo brake servo assistance. Requires investigation servos may be seized andrequire overhaul.Reply I reported Brakes as needing attention .. please do asnecessary to have Brakes operating correctly.,Fuel leaks from the fuel pump and the carburettors......Reply I am surprised at this as I have documents showing Fuel Pump overhaul., but whatever,Please carry out necessary remedy work.,Right-Hand front brake binding.Left-hand rear brake binding.Reply As we pushed the car up hill to the transporter the brakes cant bebinding too much .. . please carry necessary remedy work.,Right rear hand brake is not working and left hand is low. ....Reply please carry out necessary remedy work.,Front seat belts incorrectly fitted. These appear to be a three point design butinstalled as a lap belt. (if none were fitted it would pass).Reply I realised the Belts were wrong to say the least, if you cannot fitthem as they should be please remove them.
The radiator and engine are leaking water very badly. The radiator is splitand there is a leak from the head gasket but it is so bad it may well be theblock. Having checked the Antifreeze level it is only safe to -10 C.
I think the first coarse of action would be to remove the head and inspect.Reply I would be very surprised if this fault is anything serious .. theengine and all Ancillaries have been reconditioned .....I realise you will have to inspect to be able to report further, so please carryon and advise as soon as you can.
July 2009
Wednesday 22Letter to John Herring
Day No. 1
Time 4.00 pm Temp Cold Grey Miles 58 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Galls Miles Trip Pds
At Newport Pagnell Aston Martin Works Service
Car presented by Kevin Moore driven by Gordon Higgs
Tickford St. West to Roundabout left onto B Road100 mph … stunning!!Into Driver Seat and return to Newport and Works Service
Home Time Temp Miles 62
October
Wednesday 21Week 43 2009
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 60
October
Day No. 2
Time 4.00 pm Temp Cold Grey Miles 62
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Galls Miles Trip Pds.
Car in Works ServiceTax application Newport Pagnell Post Office … onto Northampton DVLA Office
Depart Works Service 1.40pm - WeybridgeM1 South 70 / 80 mph cosmic M25 M4 Weybridge Wrong turning twiceArrive Fairlawn 3.00 miles 128 Oil Level just off FullPictures
Depart 4.00 M4 M25 Traffic Hold Up Hi Temp 24 miles 2 hoursM1 Clear roared North to Newport Pagnell and Works ServiceArrive 6.50pm miles 192Nearside headlight offNear side front Indicator not working
Home Time 6.50 Temp Miles 192
Day No. 3
Time 11.55 Temp Sunny cold Miles 192 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Tickford St Ltrs 39.9 Miles 192 Trip Pds 41.57
Lights & Indicator ok Car Intro Parts loaded
Tickford Street West fill up Fuel Tank to M1 North Speedo Not Working
M1 2800 RpmA1M North Traffic Hold Up off West onto York Road then North to FlaxbyConeythorpe Arkendale Roecliffe Skelton on Ure Marton-le-Moor then Rejoin A1Mthen A19 to Yarm
High Street Central Street Merryweather Court
Fuel at ¼ - ½ night in Garage
Home Time 4.00 Temp Cold Grey Miles Trip
October
22 ThursdayWeek 43 2009
Friday 23Week 43 2009
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 62
Day No.
Time Temp Cloudy Rain Miles 192 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Ltrs Miles Trip Pds
Unload Boxes
Clean Wheels
Remove Badge Bar
Wet Sponge Wash Polish
Home Time Temp Miles Trip
Day No. 4
Time Temp Sunny light Rain Miles 192 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Prestwick Ltrs 345 Miles Trip Pds 37.50
With RRA19 North Wynyard Toby Inn Hartlepool Road Ouden Lodge
Hartlepool Road A19 to Yarm to Hilton Village to Staintonto Stockesley to SwainbyRR Drive to A19 A19 North to Yarm
In Garage overnight
Home Time Temp Miles Trip
October
24 SaturdayWeek 43 2009
October
Sunday 25Week 44 2009
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 64
Day No. 5
Time 7.30 Temp Sunny Miles Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Ltrs Miles Trip Pds
Yarm to Beamish
Yarm Road A19 A689 West Lay-By Tea & Sandwich to A1 North Chester le StreetA693 Thro Pelton High Hold Beamish Red Rowto Aston Workshop Beamish
8.45. Works Attention Notes
Depart 10.00To Durham Pullman Jamie local Drive
Depart 11.35To Teesside Airport Cleveland Motor Homes
With Craig Jackson local DriveThen to Darlington “Greggs Shop” Teesside Airport Cleveland Motor Homes to Yarm
Arrive 2.30
2 hours In Strickland & Holt Car Park
In Garage overnight
Home Time Temp Miles Trip
Day No. 6
Time 3.30pm Temp Miles Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Ltrs Miles Trip Pds
Yarm to Beamish Aston Workshop
Home Time Temp Miles Trip
Note of MilesAt Collection by AM Works Service Gordon 68Newport Pagnell Weybridge & Return @ 192Newport Pagnell to Yarm add 200 = 392Sunday 25th with RR add 40Yarm to Beamish to Durham to Yarm add 100Yarm to Beamish add 40 = 640
October
26 Monday
Week 44 2009
October
Tuesday 27Week 44 2009
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 66
Day No. 7
Time 1.30 Temp 1c Miles 195 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Beamish Station Ltrs 41.91 Miles 198 Trip Pds 47.32
Collected car form Aston Workshop Beamish
Stanley Chester le Street A1 South Coatham Munderville Darlington A66
Eaglescliff Yarm
TodayHome Time 2.40Temp coldMiles 45 today Mileometer 240 Trip
Day No. 8
Time 8.45 Temp Cold Dry Miles 240 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Penrith
A66 Across Scots Corner Bowes Moor Pictures Penrith By Pass
Caithwaite Plumpton Village Tim Stamper
Dep 1.30To Winston Thro Barnard Castle 3.00 Miles 371
Dep 3.40A66 A67 High Cliffedge Winston Dave Lobley house
Dep 5.45 to Yarm
TodayHome TimeTemp coldMiles today 158 Mileometer 398
March
5 Friday
Week 9 2010
MarchMonday 8Week 10 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 68
March
10 Wednesday
Week 10 2010
Day No. 10
Time 4.00 Temp Cold Dry Miles 791 Trip Aston
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Yarm A19 Parkway Stockesley Gt.Ayton 4.40 miles 811 Suggets Teas
Dep 4.55 Stockesley By Pass Hitton Rudby Crathorne Yarm
TodayHome Time 6.35Temp coldMiles 36 Mileometer 828
Day No. 9
Time 6.20 Temp Wet Miles 398 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Aston Martin Gaydon
A19 Speedo Screech Needle IrraticA1 A1M Weatherby Services station 442 miles 7.05 amPetrol at Weatherby ltrs est 53 Miles 442 Trip Pds 59.95 miles 442-198 = 244
A1M M1 off onto B Road lost ….Onto M40 Jtn 12 Gaydon Aston MartinCar Washed at AstonPictures
Depart 3.45 milometer 602 SunnyOnto M1 Wood all Services stop 696 milesPetrol 2 at Weatherby ltrs 45.15 Miles 696 Trip Pds 54.59 miles 696-442 = 254
Depart 6.10M1 A1M A1 A19 Yarm
TodayHome Time 7.40Temp coldHomeward miles at start 602 at home 791 = 189 miles 3 hours driving = 60+ mphMiles 791 Mileometer 791 today 791 -398 = 393
CalculationFill up 250 Miles approxFuel 45 Ltrs approx = 9.9 galls = 25.25 miles gallonOil Usage / Leak 2 fill ups 500 miles add 700/800 mil ltrs
March
Thursday 11Week 10 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 70
Day No. 11
Time 11.30 Temp Cold Dry Miles 828 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
With Dave ParvinYarm Kirklevington Crathorne Hutton Rugby Stop
Dave Parvin Drive through Hutton Rugby turn around to Crathorne Yarm
Home Time 12.15Temp cold cloudyMiles 13 Mileometer 841 Visit in Court Yard by Dave Nichols
2.40 Yarm to Beamish 841 milesA19 A1 Chester le Street Stanley BeamishAt Beamish 3.50 Mileometer 891Miles today 63
Note of Miles Trip Reading CompletedAt Collect At Collection by AM Works Service Gordon @ 64 64Day 1 Newport Pagnell Weybridge & Return @ 192 128Day 2 Newport Pagnell to Yarm add 200 200Day 3 Sunday 25th with RR add 40 40Day 5 Yarm to Beamish to Durham to Yarm add 100 100Day 6 Yarm to Beamish add 40 40 total 573
Day 7 Beamish Yarm 45 45Day 8 Yarm Penrith Yarm 158 158Day 9 Yarm Gaydon Yarm 393 393Day 10 Local 36 36Day 11 Local & Beamish 63 63 total 695
Day No. 12
Time Temp Miles 903 891 at drop off 12 miles on testing …. Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
12.45 Sunny warmWorkshop Attention completed – see Work Sheet Invoices
Beamish to Kip Hill Petrol Station – Newport PagnellMiles 903 ltrs 34.89 pds 42.54Miles 903 – last fill up 696 = 207 miles 34.89 ltrs (8.3 galls) = 24.9 miles gall
Beamish – A1M South – M1 – Newport PagnellDepart miles 903 time 1.20 pm1st hour 60 miles 2nd hour 74 miles 70 – 75 mph 2500 - rpm 2800 M1 Queue’sArrive Newport Pagnell fill up miles 259 / 1156 pds 44.751156 – 903 = 253 miles for 36.9 ltrs (8.7 galls) = 29 miles gall
At Swan Hotel time 6.20 miles 260 / 1158 = 255 miles
Clear Water Wash
Home TimeTempMiles 1158 = today 255 Milometer 260.5
March
12 Friday
Week 10 2010
May
Friday 21Week 20 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 72
Day No. 13
Time Temp Miles Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Swan Hotel to Aston martin Works Service Car Park
6.05 to Belfry Hotel Oxford Evening Sunny ClearDep. Miles 260.5 / 1158 MI North M40 South WestRichie in Renault in tandam DB7 Zagato BMW great run
at Belfry Hotel miles trip 322 / mile odometer 1221 time 6,.55 62 miles 50 mins
Overnight in Car Park lots of Astons
Home TimeTempMiles 1221 = today 62 miles 50 mins Milometer 322.
Day No. 14
Time Temp Miles Trip9.45 Sunny Dry 1221 322
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Belfry Hotel to Blenheim Palace 20 miles approx
Dep 4.30 to Woodstock Village 345 / 1243
Dep 5.25 to Teesside A44 – M40 – A46 Leister – M1 – M18 – A1M - A1975-80 mphWith Richie Renault 197 in tandam2600 – 3000 rpm 75 – 80 mphA19 fuel cut off onto reserve 3 – 4 miles to BP GaragePetrol miles 570 / 1468 Ltrs 56.84 Pds 68.15 8.55 pm1468 – last fill up at 1158 = 310 miles for 56.84 ltrs(13.5 galls) = 22.9 miles / gall
To Parvins House Linthorpe Middlesbrough miles 584 / 1481 9.18 pm =At ParvinsLeft Woodstock 5.25 at Parvins 9.18 pm = 3 hr. 48 minsStop at A46 reset Tom Tom 15 minsStop at A19 Petrol 15 minsTravel time 3 hr 18 mins miles at dep.1243 at Parvins 1481 = 238 miles= 74.8 miles hr Ave.
Depart to YarmLinthorpe to A19 to leven turn around to A19 to Thornaby Junction turn around to A19 SouthTo Yarm turn Off
Home Time 11.30TempMiles 1500 = 278 miles Milometer 604.2
May
22 Saturday
Week 20 2010 May
Sunday 23Week 21 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 74
May
24 Monday
Week 21 2010
Day No. 15
Time Temp Miles Trip7.40 Sunny 1500 604.2
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Yarm Beamish A66 A1M
Arrive 8.32 646.2 / 1542 42 miles 52 mins
Collect 5.30 650.5 / 1546 A1M – A689 – A19 – YarmArrive 6.30 pm 699 / 1595
Home Time 6.30 pmTempMiles 1595 = today 95 Milometer 699
Day No. 16
Time Temp Miles Trip12.12 Grey Cloudy 1595 699
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Yarm Crathorne Hutton Rudby Stockesley Gt. Ayton RSPCA & Suggets
Dep 1.05 Stockesley Skutterskelf Hutton Rudby Crathorne Yarm 2.10 729 / 1625
Dep 2.50 to Harlepool Marina 3.25 748 / 1645
Dep 3.50 to Beamish 4.55 pm 791.7 / 1689
Home TimeTempMiles 1689 = today 94 Milometer 791.7
May
Tuesday 25Week 21 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 76
June
5 Saturday
Week 22 2010
Day No. 17
At Aston Workshop Beamish
Time Temp Miles 1689 Trip 793.1
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Depart 12.25 Petrol at Kip Hill 794.3 / 1690 Ltrs. 46.27 Pds 55.02Sunny WarmTo Yarm via Stanley – A1M – Turn off at Middleton Tyas – Scorton – Warsall – YarmCar runs much smootherAt Yarm 2.05 857 / 1754
Depart 5.25 Yarm to Carlton with B M Caterham 7 via Crathorne – Hutton Rugby – Thro low lane -At Carlton 5.45 868.3 / 1764Depart 7.15 via Stockesley By Pass to Marton ( Murrys house) 877 / 1779Local Drive with Bri Murray Marton Road – Parkway West then U Turn Bri M drive to Marton
Depart 10.10 Marton Road Past Southern Cross Top Road to Parkway A19 to Yarm10.35 pm 899.8 / 1796
Home Time 10.35TempMiles Start 1689 TripOmeter 793.1
Fin 1796 899.8 106.7
Day No. 18
Time 9.10 Temp Miles 1796 Trip 899.8
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Yarm to Teesside Airport Cleveland Motor HomesRemove Steering Wheel Drill Boss Holes 4mm to 5mm for larger Dia Counter Sunk Screw Headsfitted with Flat Washers and Lock Nuts.,one Screw Snapped at tighten up, replaced with Slot Head Screw.
To Yarm
Grey Skies Brighter midday possible rain
Home TimeTempMiles Start 1796 TripOmeter 899.8
Fin 1805 909.7 9
LE MANS 2010 TRIP June
Monday 7Week 23 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 78
Day No. 19
Time 8.25 Temp Cool Grey Skies Light drizzle Miles 1805Trip 909.7
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Petrol Station Shell Yarm StationEngine Oil at top of letter W on Dip Stick… Petrol 20.39 ltrs pds. 23.63mileage 910.5 / 1807 miles for fill up 1690 from 1807 = 117 div 20.63 @ 4.5 = 24 mpg
To Le Mans via Weybridge & Portsmouth RainA19 - A1M – M18 – M19.00 hit Grouse …..9.05 Wiper and Arm came off landed on Bonnet retrieved ok refitted9.25 96.9 / 1866 miles Wiper and Arm came off again, Arm gone on road Blade landed on Bonnetretrieved ok.1st hour driving 57 miles2nd hour driving 52 miles11.15 at 0019 miles stopped for Glue & String, fitted Blade onto Spare Arm, refitted on to Spindlewith Glue, and ESSS, Equipment Secure System –StringPetrol 18.81 ltrs 23.68 Pds.mileage 019.8 / 1917 miles for fill up 1807 from 1917 = 110 div 18.81 @ 4.5 = 26.4 mpg3rd hour driving 30-32 miles4th hour driving 58 milesStopped at Newport Pagnell 108.3 / 2004 12.45
Onto Weybridge Arrived Fairlawn 2.15 0175.5 / 2072
To Portsmouth Arrived 5.40 243.0 / 2139 Petrol Gauge 1/4 - 1/2
Overnight on Ferry Portsmouth - St. Malo France
Home TimeTempMiles Start 1805 TripOmeter 909.7
Fin 2139 243 334
Day No. 20
Time 8.30 Temp Cloudy Sun Dry Miles 2140 Trip 243.8
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
St. Malo France To Le MansAt Port Exit Fit Head Light Dip Reflectors Take Photographs
To Petrol Station.Petrol 36.82 ltrs 49.30 eurosmileage 245.5 / 2142 miles for fill up 1917 from 2142 = 225 div 36.82 @ 4.5 = 27.5 mpg
to Le Mans D47 Rue du General Patton N137 Reuness 38 miles turn off N136 2181 / 285.4at 295 / 2191 turned onto N157 to Le Mans
Coffee stop 11.00 miles 317.1 / 2213Depart 11.35 RR Drive Toll ticket at miles 325 to pay 9.70 euros
Arrive At. Pavace 1.10 pm 388.7 / 2284 from Teesside 1805 = 479 miles
Car Wash in Coiltinnes
Depart 4.20 to Malicorne 393.3 / 2289 cloudy sunny onto Road D23Arrive Malicorne 5.00 418.7 / 2318 into Chateau Rive Sarthe PhotosRestaurant Petite Auberge MalicorneDepart 8.35 miles 421 / 2318 to St. Pavace via Le MansThro Le Mans, Shop (Beer)Petrol at Train Station 39.04 ltrs 52.66 eurosmileage 451.1 / 2347 miles for fill up 2142 from 2347 = 205 div 39.04 @ 4.5 = 23.6 mpg
At St. Pavace arrive 10.35 mileage 456.2 / 2353First Night in France Overnight in St. PavaceHome TimeTempMiles Start 2139 TripOmeter 243
Fin 2353 456.2 214
June
8 Tuesday
Week 23 2010
June
Wednesday 9Week 23 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 80
Day No. 21
Time Temp Sunny Miles 2353 Trip 456.2
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
St. Pavace - Le Mans - MulsanneMulsanne straight South – North – South
Depart Mulsanne Village to Chatre sur de loir and the Hotel du France
At Village Square 12.00 508 / 2405 Sunny very warm
Photos in Square
Depart 3.45 Country roads … Farm lanes to St.PavaceArrive 5,40 557.9 / 2454 sunny blue skies
Parked up for night.
Home Time 5.40TempMiles Start 2353 Milometer 456.2
Fin 2454 557.9 101
Day No. 22
Time 9.15 Temp Rain Grey Skies Miles 2454 Trip 557.9
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
St. Pavace - Le Mans 24 Hours Circuit
Arrive 10.50 Traffic heavy
Parked in Aston Martin VIP Car Park For the day and night
Home TimeTempMiles Start 2454 Milometer 557.9
Fin 2473 577.2 21
June
11 Friday
Week 23 2010
June
Saturday 12Week 23 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 82
Day No. 23
Time 11.00 Temp Miles 2473 Trip 577.2
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Parked in Aston Martin VIP Car Park to VIP Hospitality for Photos
6.45 Depart Circuit – Coinnes Shops - St. PavaceArrive 7.20 sunny evening
Home TimeTempMiles Start 2473 Milometer 577.2
Fin 2486 589.4 13
Day No. 24
Time 9.55 Temp Sunny Cloudy Miles 2486 Trip 589.4
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
St. Pavace – Caen. Car Ferry PortDepart St. Pavace left out of Village onto D47 to BeamontBreakfast stop Beaumont Village Square Café …..onto D338 North to Fye – D338 Alencon … till Acconay then onto the 438 then D26 on toForest Roads Trees over hanging the road, Climbing up, windows open Car sounds great,Onto D958 – D158 – D658 – N158 to Caen Peripherique East -onto the D515 to Ouistreham and the Port.
Petrol 52.52 ltrs 70.85 eurosmileage 697.3 / 2593 miles for fill up 2347 from 2593 = 246 div 52.52 @ 4.5 = 21.3 mpg
Lunch Stop at Pegasus Bridge Café …. The Historic Site of Allied Forces Landing ………..
Depart 1.35 698.2 / 2594 to Ferry Port At Port 2.50 pm 702.8 / 2599 Sunny Windy
Arrive Portsmouth 9.15 pm Depart Port Gates 10.10 703.5 / 2600M275 East Southampton - M3 – M4 – Newbury – Oxford M40- M1-Boys Stop 12.45 864.0 / 2760 & Petrol 30.54 ltrs 38.55 poundsmileage 864.0 / 2760 miles for fill up 2593 from 2760 = 167 div 30.54 @ 4.5 = 24.9 mpg
M1 – Exits blocked on M18 & A1M so onto M62 – A1M No A168 to A19 so North toDetour A61 – right at A167 to A19 to Yarm
Home Time 3.45 amTempMiles Start 2486 Milometer 0589.4
Fin 2926 0029.7 440
June
13 Sunday
Week 24 2010
June
Monday 14Week 24 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 84
Day No. 25
Time 1.30 pm Temp Sunny Cloudy Miles 2926 Trip 29.7
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
House - Teesside Airport - Cleveland Motor Homes
Clean
Dep 5.15
Yarm
Home Time 5.35TempMiles 2935 Milometer 39
Day No. 26
Time 7.30 am Temp Sunny Cold Miles 2935 Trip 39
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Y-arm Beamish Hotel
Aston Workshop 11.10 81.4 / 2978
Depart 1.45Petrol 44.7 ltrs 52.2 poundsmileage 82.7 / 2979 miles for fill up 2760 from 2979 = 219 div 44.7 @ 4.5 = 22 mpg
To Preston Park Stratstones to Yarm
135 / 3032 To Hartburn …. At start up Starter Click, at 2nd attempt start ok ….At Hartburn Village Entry Roundabout, Stalled … At Re Start .. Clicking .. Not S. Motor …Push StartOnto Hartburn – Masham Parked on HillDepart 7.45 Start Screw Driver across SolenoidAcross A66 – Eaglescliff – right past Airport – past Wheatchef Pub – Left to Middleton One RowTo Low Middleton – to Aislby – to Yarm
Sunny Evening
Home Time 8.30TempMiles Start 2935 Milometer 39
Fin 3050 153.6 85
June
15 Tuesday
Week 24 2010
June
Wednesday 16Week 24 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 86
Day No. 27
Time 2.30 Temp Sunny Blue Skies Miles 3050 Trip 153.6
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Yarm - Beamish
At Aston Workshop 3.40 208 / 3105
Home TimeTempMiles Milometer
Note of MilesSpeedo Recorded Miles & Trip meter discrepancy, and Trip down period result in
Miles shown are an indication
No. of theDay Used Trip Reading Completed
Oct 2009 At Collect AM Works Service @ 64 64
Day 2 Newport Pagnell Weybridge & Return @ 192 128
Day 3 Newport Pagnell to Yarm (No Speedo) add 200 200
Day 4 Sunday 25th with RR add 40 40
Day 5 Yarm to Beamish to Durham to Yarm add 100 100
Day 6 Yarm to Beamish add 40 40 total 572
March 2010 Speedo repaired
Day 7 Beamish Yarm 45
Day 8 Yarm Penrith Yarm 158
Day 9 Yarm Gaydon Yarm (No Speedo) 393
Day 10 Local 36
Day 11 Local & Beamish 63 total 695
May 2010Day 12 Beamish Newport Pagnell 255
Day 13 Newport Pagnell Belfry Htl Oxford 62
Day 14 Htl Blenheim Palace Yarm 282
Day 15 Yarm Beamish Yarm 95
Day 16 Yarm Local Yarm Beamish 94 total 788
June 2010Day 17 Beamish Teesside Local Drive 793.1 106.7
Day 18 Local Drive 899.8 9
Day 29 Teesside – Portsmouth 909.7 334
Day 20 St. Malo France –Le Mans – St. Pavace 243 214
Day 21 Mulsanne – Le Mans – St. Pavace 456.2 101
Day 22 St. Pavace – Le Mans 557.9 21
Day 23 Le Mans – St. Pavace 577.2 13
Day 24 St. Pavace – Caen 589.4 440
Day 25 Local Drive 29 10
Day 26 Yarm –Beamish –Yarm- local 39 85
Day 27 Yarm – Beamish 124 47 total 1380
1959 - 1962 1st Owner 17982 miles no details Miles covered as noted 3680
1968 - 1988 Previous Owner minimal road use
1968 - 1988 Previous Owner minimal road use
1988 - 2009 No road use
October 2009 – June 2010 as above
June
17 Thursday
Week 24 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 88
Day No. 29
Time Weather Sunny Cloudy Miles 3192 Trip 60.6
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Oil Added 100 milli litrs to, Just off Full
Petrol at Leven Shell Sta Ltrs 46.31 Pds 52.75 miles 3201 / 69.6
To Parvins Linthorpe
To Thornton
To Yarm
Home TimeTempMiles 19 Milometer 3211
September
Sunday 12Week 37 2010
Day No. 28
Time 2.30 pm Weather Cloudy Dry Miles Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Aston Workshop BeamishWork Completed refer Attention list 4 Invoice S44994 Dated 10.09.2010
Depart 2.30 - Yarm
Beamish – A1M –
Car much Crisper Steering Conversion makes driving even more of a dream
A66 – Yarm
Home Time 3.30TempMiles 50 Milometer 3192
September
10 Friday
Week 36 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 90
September
14 Tuesday
Week 37 2010
Day No. 30
Time Weather Cloudy Light Rain Miles 3212 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Croft Circuit
Arrive 3224 Paddock DisplayCircuit Drives Richie & SelfMax 400 RpmCornering technique ….. Set up … allow Suspension Take Up … Turn In … let her DriftBlooming CosmicDid not get up to or near Top Speed ……
Depart in Tandem with DB6 to Dalton Chequers Inn.
To Spa Croft Hotel 3246 / 114.5
Depart Sunny to Thornton To Gt. Ayton Suggits Ices Shop 3269 / 137.7
Depart 4.15 to RSPC …onto Stockesley By Pass …. to Hutton Rugby Turn Off ….to Seamer Right at Kings Head to Thornton 5.00 pm 3281 / 149.4
Depart 5.30 pm to Yarm 3286 / 154.7
Home Time 5.45 pmTempMiles 75 Milometer 3286
Day No. 31
Time 1.00 Weather Dry Cloudy Miles 3286 Trip 154.7
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Petrol at Leven Shell Sta Ltrs 22.30 Pds 26.74 miles 3287 / 155.9Last Fill Ltrs 46.31 Pds 52.75 miles 3201 / 69.6Since last fill Pds 26 miles 86
To BristolA19 South - A1M – A1 Doncaster By Pass – M18 – M1 – M42Tea Stop 4.05pm 3472 / 340.6 Hopwood Park mixed weather 185 milesDepart 4.30 to Bristol Hotel 6.30 pm 3556 / 424.6 … 270 miles 5.5 hrs driving ave. 50 mph/hrNight In Underground Parking.
Home TimeTempMiles 270 Milometer 3556
September
Wednesday 15Week 37 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 92
September
16 Thursday
Week 37 2010
Day No. 32
Time 12.15 Weather Cloudy Dry Miles 3556 Trip 424.6
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Bristol Centre into National Car Park Wharf side.
Depart 1.30 pm To Goodwood 3557 / 425.2
Petrol at M4 BP Station Ltrs. 47.09 Pds 58.34 miles 3580 / 449Last Fill Ltrs 22.30 Pds 26.74 miles 3287 / 155.6Since last fill miles 293
Stop at Station to Wash Car 3.30 pm., to Goodwood
Home TimeTempMiles 163 Milometer 3719Including Friday Saturday Sunday local useAccommodation Site to Circuit Car Park / Aston Workshop Stand
Day No. 33
Time 9.35 am Weather Sunny Miles 3719 Trip 587.6
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Goodwood – Southampton direction - M27 -1.10 mins hour driving at 10.45 3791 at start 3719 = 72 miles2 nd hour driving 3855 after above = 64 milesWife asleep, got her up to 100 no problem at all …..
Stop 12.50Petrol at 1st M1 Station Ltrs. 33.41 Pds 40.06 miles 3911 / 77.2Last Fill Ltrs 47.09 Pds 58.34 miles 3580 / 449Since last fill miles 321Stop at 12.50 Dep at 13.40 = 50 min stop
M1 to Leeds to A1M to A194000 miles turned over at 2.30 pm Leeds Junction3.31 pm turn off A1 to A19
At Thornton 4.00 pm 4073 miles
Depart 4.45 pm to Yarm 5.00 pm 4081 miles
Goodwood trip Note … Departed at 3287 Rtn at 4081 = 794 miles Petrol 10.80 Pds 125.14
Depart Yarm 5.45 pm to Newcastle Airport.Past Teesside Airport - A66 – Haughton – A1M NorthAt Airport Premier Hotel 6.50 pm miles 4134 Dry Sunny Night in Hotel Car Park
Home TimeTempMiles 415 Milometer 4234
September
Monday 20Week 38 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 94
September
21 Tuesday
Week 38 2010
Day No. 34
Time Weather Dry Cloudy Miles 4134 Trip 002
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Airport Hotel Car park to Beamish Aston Workshop 10.00 am
Depart 11.50 miles 4157 to Thorpe Larches Eden Shop 12.20 4185 milesDepart 12.25 to Yarm arrive 12.45 4196 / 69.7
Petrol at Leven Station Ltrs. 50.23 Pds 57.21 miles 4200Last Fill Ltrs 47.09 Pds 58.34 miles 3911Since last fill miles 209
Wash then to Yarm
Home Time 5.10 pmTempMiles 69 Milometer 4203
Day No. 35
Time 4.00 Weather Miles 4203 Trip
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Teesside Airport – Cleveland Motor Homes
Refurbished In Period Number Plate Fitted
Depart 5.40 pm to Masham Pub Hartburn VillageVia Long Newton & Elton
To Yarm
Home Time 7.40 pmTempMiles 16 Milometer 4219
September
Wednesday 22Week 38 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 96
September
23 Thursday
Week 38 2010
Day No. 36
Time 12.10 pm Weather Miles 4219 Trip 87.9
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Thornton 4225 / 93.2
Depart 2.30 pm to Yarm then to BeamishTime 3.30 pm Eaglescliffe – Thorpe Larches – Sedgfield By Pass – A1M – Chester le St turn off
At Aston Workshop 4.25 pm 4269 / 137.1 Rain at Beamish
To Black Horse
Depart 8.40 pm to Yarm A1M Sedgfield Thorpe Larches Eaglescliffe YarmWet Cold – Heater Good – Rear View Mirror Not Good at night with cars coming up behind.
At Yarm 9.40 pm
Home Time 9.40 pmTempMiles 89 Milometer 4308
Day No. 37
Time 6.50 pm Weather Cold Damp Miles 4308 Trip 176.1
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Thornton To The Manor
To Yarm
Home Time 8.15 pmTempMiles 10 Milometer 4318
September
Friday 24Week 38 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:02 Page 98
September
25 Saturday
Week 38 2010
Day No. 38
Time 10.05 Weather Sunny Cloudy cold Miles 4318 Trip 186.7
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
To Thornton 432410.20 to StaintonTest Drive with Valerie & Helen - Stainton Hemlinton By Pass Stockesley Road &Return
To Yarm / Leven Station Power Wash Wheels and Arches
To Yarm 12.50 pm miles 4336 / 204.3
Depart 4.00 pm to BeamishEaglescliffe – Thorpe Larches – Sedgfield By Pass – A1M – Chester le St turn offAt Aston Workshop 4.47 pm 4375 / 243.1 39 miles
Car left at showroom.
Home TimeTempMiles 57 Milometer 4375
This Diary inset concludes ….
1 year and 3 months, July 2009 since collection from previous owner&1 year and 14 days, since use began
THE CROFT TRACK DAY
DB MkIII book latest copy 2:Layout 1 2/12/10 12:03 Page 100
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Note of MilesSpeedo Recorded Miles & Trip meter discrepancy, and Trip down period result inMiles shown are an indication
Note of Miles TripDay Use No. Details Reading CompletedOct 2009 At Collection by AM Works Service Gordon @ 56 8Day 2 Newport Pagnell Weybridge & Return 64 128Day 3 Newport Pagnell to Yarm Speedo packed in add 192 200Day 4 Sunday 25th with RR add 40Day 5 Yarm to Beamish to Durham to Yarm add 100Day 6 Yarm to Beamish add 40 total 572
March 2010Day 7 Beamish Yarm 45Day 8 Yarm Penrith Yarm 158Day 9 Yarm Gaydon Yarm 398 393Day 10 Local 791 36Day 11 Local & Beamish 827 63 total 890
May 2010Day 12 Beamish Newport Pagnell 255Day 13 Newport Pagnell Belfry Htl Oxford 62Day 14 Htl Blenheim Palace Yarm 282Day 15 Yarm Beamish Yarm 95Day 16 Yarm Local Yarm Beamish 94 total 788
Speedo repaired
June 2010Day 17 Beamish Teesside Local Drive 793.1 106.7Day 18 Local Drive 899.8 9Day 19 Teesside – Portsmouth 909.7 334Day 20 St. Malo France –Le Mans – St. Pavace 243 214Day 21 Mulsanne – Le Mans – St. Pavace 456.2 101Day 22 St. Pavace – Le Mans 557.9 21Day 23 Le Mans – St. Pavace 577.2 13Day 24 St. Pavace – Caen 589.4 440Day 25 Local Drive 29 10Day 26 Yarm –Beamish –Yarm- local 39 85Day 27 Yarm – Beamish 124 47 total 1380
Mileage reading does not include mileage covered while Speedo was being RepairedMiles covered as Noted and totaled is 3630Last Reading was at Car to Beamish 17 June 2010 Day 27 Trip 208 / Mileage 3105
Aston Martin DB Mk III
Chassis No . AM/300/1815
Registration No. WYE 847
Note of Miles MileometerDay Use No. Details Reading CompletedSeptember 2101Day 28 Beamish Yarm 3192 50Day 29 Local Drive 3211 19Day 30 District Drive 3286 75Day 31 To Bristol 3556 270Day 32 To Goodwood & including 3 days local use 3719 163Day 33 Goodwood to Yarm to Newcastle 4134 415Day 34 Newcastle to Yarm & some Local Drive 4203 69Day 35 Local Drive 4219 16Day 36 Yarm Beamish Yarm 4308 89Day 37 Local Drive 4318 10Day 38 Some local Drive then Beamish Aston Workshop 4375 57 total 1233
Miles covered as Noted and totaled is 4863
Note of MilesSpeedo Recorded Miles & Trip meter discrepancy,Speedo and Trip down period result in Miles shown are an indication, showing some 450 est.short.
1959 - 1962 1st Owner 17982 miles no details1962 – 1968 Previous Owners No details1968 - 1969 Previous Owner minimal road use1969 – 2009 Previous Owner Restoration No road useJuly 9 2009 - October 2010 ………. As used 4863 miles (recorded 4375)
DB MkIII book latest copy 2:Layout 1 2/12/10 12:03 Page 102
THE LE MANS TRIP 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:04 Page 104
THE LE MANS TRIP 2010
DB MkIII book latest copy 2:Layout 1 2/12/10 12:04 Page 106
APPENDIX A
The Post War Models up to 1964
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 108
THE DB1
The initial model manufactured by Aston Martin was a 2 seat Tourer, styled by Frank Feeley and aimed at the
export market, particularly America. At the time production was authorised, the WO Bentley designed LB6
engine was not available, and so the Claude Hill designed chassis was mated with his 2 litre 4 cylinder
overhead valve engine. They performed well and soon established a reputation for excellent road holding and
ride comfort but in David Brown’s opinion, were seriously under powered and were clearly unsuited to the
demands of being a top sports racing car. Nevertheless, they were competitive club racing cars over a
number of years from 1949 to the mid 1950s. In all 14 of these cars were manufactured.
The chassis carried over the design features of the “Atom” and was fitted with a David Brown gearbox.
Production History
First shown at the 1948 Motor Show
Chassis numbers AMC48/1 to AMC48/15
Chassis number AMC48/1 was an open 2 seat sports racing car known as the “Spa Special”
A total of 14 DB1 Drop Head Coupes were built, production being suspended in 1950 on the introduction
of the DB2.
Engine
CC 1970cc
Cylinders 4
General Pushrod o.h.v
Compression Ratio 7.25 to 1
Max Torque N/A
Power 90 at 4,750 rpm
Transmission
Clutch Borg & Bech sdp
Gearbox 4 speed non synchromesh
Final Drive Hypoid Bevel
Overall Gear Rations
1st 12 to 1
2nd 7.7 to 1
3rd 5.17 to 1
4th 4.1 to 1
Reverse 12 to 1
Suspension
Front Type Independent by twin trailing arms and coil springs
Rear Type Rigid axle with twin trailing arms and Panhard rod
Brakes Drum Girling Hydraulic 12 in dia
Wheels Centre lock 16in
Weight
Dry 22.5 cwt
Dimensions
Length 14ft 8in
Width 5ft 7.5in
Height 4ft 7.5in
SPECIFICATION
PERFORMANCE
Not tested and no performance figures are available.
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 110
THE DB2
The DB2 was a defining model for Aston Martin. It confirmed Aston Martin as a design and manufacturer
of sporting cars of the highest quality, performance and elegance and has set a standard that Aston Martin
has maintained ever since. Launched in 1950, the DB2 brought together the 2.5 litre WO Bentley LB6
engine, the chassis design inherited from the DB1 and a new Frank Feeley styled 2-seat coupe body. It
quickly established Aston Martin as a premium sports car manufacturer with a design that rivalled the very
best that was available anywhere. Practical design features included an opening bonnet assembly providing
unsurpassed access for servicing and repairs. A roadster variant was available by early 1951. The DB2
continued in production until 1953, when superseded by the DB2/4. A Vantage version with a higher
compression and bigger valves was available which increased power from the standard 105 to 125 bhp.
The Body was made in house at Feltham and featured a split windscreen. Body panels were fabricated in
aluminium. The chassis was manufactured at Farsley in Yorkshire by a David Brown subsidiary company.
The David Brown 4 speed gearbox featured synchromesh in 2nd, 3rd and 4th. Coil sprung all round, the
car featured trailing arm front suspension and at the rear twin trailing arms and a Panhard rod located the
rear axle. Lever arm dampers were used front and rear.
The engine featured an unusual design with a barrel crankcase with the 4 main bearings being contained in
cheeses bolted around the crankshaft. Wet cylinder liners were located into seats in the crankcase around
their base. The cylinder head featured twin overhead camshafts and hemispherical combustion chambers.
Model Series Years of Manufacture Number Produced Chassis No Sequence
Development Cars 1949 4 LMA 49/1 to 49/4
Works Cars 1950 1 LML 50/5
Engine Development
Production Cars 1950 to 1953 Total - 400 LML 50/6 to 50/406
Works Competition 1950 3 LML 50/7 to 9 incls
Cars LML/50/50 LML/50/55
Saloons 1950 to 1953 302 As above
Drop Head Coupes 1950 to 1953 98 As above
DB 2/4 1952 1 LML50/221
Development Car
Coupes 1952/3 2 Special order for
Sir David Brown
LML /515
Facel coupe
LML/50/335
PRODUCTION HISTORY
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 112
Engine
CC 2580cc
Cylinders 6
General Dohc – twin 1.5 in SUs
Compression Ratio 6.5 to 1
Max Torque 125 lb ft at 3,100 rpm
Power 105 bhp net at 5,000 rpm
Transmission
Clutch single dry plate mechanically operated
Gearbox 4 spd syncromesh on 2nd, 3rd and top
Final Drive Hypoid bevel 3.77 to 1
Overall Gear Rations
1st 11.03 : 1
2nd 7.05 : 1
3rd 4.75 :1
4th 3.77 :1
Reverse 11.03 :1
Suspension
Front Type Independent by twin trailing arms and coil springs
Rear Type Rigid axle with twin trailing arms and Panhard rod
Brakes
Front Drum 12in
Rear Drum 12in
Wheels
16in 6.00 16 tyres
Weight
21.9 cwt net
Dimensions
Length 13 ft 7in
Width 5 ft 5in
Height 4 ft 6in
Max Speed
116 mph
Acceleration
0 – 30 mph 4.1 secs
0 - 60 mph 11.2 secs
0 – 100 mph 34.5 secs
40 – 60 mph 9.4 secs in top
50 – 70 mph 9.9 secs in top
Standing Quarter 18.5 secs
Fuel Consumption
Touring 24 mpg
Overall 20 mpg
SPECIFICATION PERFORMANCE
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 114
THE DB2/4
The DB2/4 was launched in October 1953. In response to customer demand, the DB2 had been modified
with a one-piece windscreen; there was a higher roofline and rear set accommodation to create a car in the
2 plus 2 form. At the same time, the opening rear window provided access to a large area behind the rear
seat squab, and thus created a very practical hatch back and making it a thoroughly practical car for the
sporting owner with a family. The LB6 engine was carried over from the DB2. Weight increased but so did
the power output from the engine, which rose to 140bhp. Extras included twin exhaust pipes. It was available
in drop head form in 1954. The Body was manufactured under sub contract to Mulliners in Birmingham who
had available capacity at the time. Among unusual features was a one piece aluminium casting for the Body
sill and A Post.
In 1956, the DB2/4 was given a facelift and became known as the DB2/4 Mk2, with a revised opening
bonnet assembly, chrome flashes, and minor control modifications. The major change, however, was that
body manufacture was entrusted to Tickfords at Newport Pagnell. A saloon configuration was offered for
sale with a conventional boot. The drop head variant continued as before. The sill design was changed
and sills were now steel fabrications. The engine specification continued unaltered, but a special series
engine with yet bigger valves and higher lift and wilder camshafts was offered as an extra which
increased power yet again to a claimed 165 bhp.
Model Series Years of Manufacture Number Produced Chassis No Sequence
DB 2/4 Total Production 1953 to 1955 564 LML /501 to LML/1065
DB 2/4 Saloons 1953 to 1955 462 LML/501 to LML1065
DB2/4 Drop Head 1953 to 1955 102
Coupes
DB2/4 1953 to 1954 14 8 Bertone bodied
Special Order Externally LML/762 plus others
Externally Bodied Cars 1 Vignale LML/802
1 Alemano LML/761
4 others
DB 2/4 Mk2 Total 1955 to 1957 199 AML300/1101 to
AML300/1299
DB2/4 Mk2 Saloons 1955 to 1957 145
DB2/4 Mk2 1955 to 1955 16
Drop Heads
Fixed Coupes 1955 to 1957 34
DB2/4 Mk2 1956 3 Touring
Special Order 3 Open Spyders
Development 1956 1 AML 300/1185
1 DB4 development car
PRODUCTION HISTORY
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 116
Engine
CC 2,922 cc
Cylinders 6
General Dohc – twin 1.5 in HD 6 SUs
Compression Ratio 8.2 to 1
Max Torque 178 lb ft at 3,100 rpm
Power 140 bhp net at 5,000 rpm
Transmission
Clutch single dry plate mechanically operated
Gearbox 4 spd syncromesh on 2nd, 3rd and top
Final Drive Hypoid bevel 3.77 to 1
Overall Gear Rations
1st 10.9 :1
2nd 7.38 :1
3rd 4.96 :1
4th 3.73 :1
Reverse 10.9 :1
Suspension
Front Type Independent by twin trailing arms and coil springs
Rear Type Rigid axle with twin trailing arms and Panhard rod
Brakes
Front Drum 12in hydraulic
Rear Drum 12in hydraulic
Wheels
16in 6.00 16 tyres
Weight
25 cwt net
Dimensions
Length 14 ft 1in
Width 5 ft 5 in
Height 4 ft 6in
SPECIFICATION
Max Speed
118 mph
Acceleration
0 – 30 mph 3.8 secs
0 - 60 mph 11.1 secs
0 – 100 mph 31.7 secs
40 – 60 mph 7.9 secs in top
50 – 70 mph 8.0 secs in top
Standing Quarter 17.9 secs
Fuel Consumption
Touring 23 mpg
Overall 20 mpg
PERFORMANCE
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 118
DB2/4 MKIII
The DB2/4 was never intended to be anything other than a stop gap model while the DB4 design and
development programme continued. By late 1956, it was clear that sales of the DB2/4 were flagging,
particularly in some of the key overseas markets and a new model was urgently required. To keep production
viable, it became imperative to yet further revise the DB2/4 and to provide, in line with customer expectations
for greater comfort, improved seating and ventilation arrangement. Inevitably this led to increased weight and
with it a requirement to revise the engine specification to yet again increase power. At the same time, Tadek
Marek redesigned the LB6 engine cylinder block to change the position of the wet cylinder liner seats from
the base to the top, thereby radically simplifying assembly; he increased oil pump capacity, and a heavily
revised cylinder head with bigger valve seats and improved porting derived from racing experience was
introduced. The new engine, known as the DBA, produced in standard form 162 bhp; in twin exhaust form
178 bhp; and in DBD tune as a special series engine, a third carburettor was added yet further increasing
power to 180 bhp.
The body was revised and introduced a grill shape emulating the design of the DB3S, but in most other
respects remained the same as the DB2/4 Mk 2. The grill shape has been a defining feature of Aston Martin
ever since. The dashboard was revised with instruments now being clustered around the steering wheel.
An overdrive was offered as an extra for the first time and at least one car was sold with an automatic
gearbox.
The suspension was carried over from the DB2/4 Mk2 but for the first time front disc brakes were offered.
The saloon and drop head variants continued to be offered.
PRODUCTION HISTORY
Model Series Years of Manufacture Number Produced Chassis No Sequence
DB Mk III 1957 to 1959 550 AM300/3A/1300 to
Total Production AM300/3/1850
DB Mk III Saloons 1957 to 1959 459
DB Mk III 1957 to 1959 85
Drop Head Coupe
DB Mk III 1957 to 1959 5
Fixed Head Coupe
Prototypes 1957 1 AM300/3A/1300
Mk III development car
Special Bodies 1960 2 AM300/3/1399 & 1400
2 chassis sent to
Bertone and delivered
back to Aston Martin in
1960 – Fate unknown
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 120
Engine
CC 2,922 cc
Cylinders 6
General Dohc – twin 1.5 in SUs
Compression Ratio 8.2 to 1
Max Torque 180 lb ft at 4,000 rpm
Power 162 bhp net at 5,500 rpm (178 bhp with optional twin exhaust)
Transmission
Clutch single dry plate hydraulically operated
Gearbox 4 spd syncromesh on 2nd, 3rd and top
Final Drive Hypoid bevel 3.77 to 1
Overall Gear Rations
1st 11.0 :1
2nd 7.45 :1
3rd 5.01 :1
4th 3.77 :1
O/D 2.93 :1
Reverse 11.0 :1
Suspension
Front Type Independent by twin trailing arms and coil springs
Rear Type Rigid axle with twin trailing arms and Panhard rod
Brakes
Front Drum 12in hydraulic
Rear Drum 12in hydraulic
Wheels
16in 6.00 16 tyres
Weight
27 cwt net
Dimensions
Length 14 ft 4in
Width 5 ft 5 in
Height 4 ft 6in
SPECIFICATION
Max Speed
118 mph
Acceleration
0 – 30 mph 3.8 secs
0 - 60 mph 11.1 secs
0 – 100 mph 31.7 secs
40 – 60 mph 7.9 secs in top
50 – 70 mph 8.0 secs in top
Standing Quarter 17.9 secs
Fuel Consumption
Touring 23 mpg
Overall 20 mpg
PERFORMANCE
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 122
DB 4
The DB4 was announced and exhibited for the first time at the London Motor Show in October 1958.
It caused a sensation for it was a complete break from previous worthy but uninspired design that
characterised British car design in the late 40’s and 50’s. It promised performance unmatched by any series
production car when it was launched. Pitched at a price that significantly undercut its Italian competitors, it
would have sold in great numbers if only Aston Martin could manufacture them. In fact full scale production
really only got underway in the latter stages of 1959 and early 1960, and with evidence that suggested rushed
development and some worrying systemic engine problems that caused Aston Martin much grief and not at
little cost.
Nevertheless, its 3.7 litre engine was smooth, torquey, powerful and sporting. All alloy, it was also reasonably
light. It had a massively strong crankshaft, allied to a generous sized 7 bearing crankcase and journals.
Wet linered, it was fitted with an all alloy cylinder head, hemispherical combustion chambers allied to twin
overhead camshafts with considerable development potential. Much of the early unreliability came from the
consequences of heat expansion causing the main bearing clearances to increase with consequent loss
of oil pressure leading to bearing damage. Over time, the optimal main bearing clearance became established
and with it, better oil cooling, an improved oil pump and a massive increase in sump capacity ultimately led to
an engine that could be thrashed like no other.
It was allied to an uprated David Brown 4 speed all synchromesh gearbox. Overdrive was an optional extra.
It was given all wishbone front suspension allied to rack and pinion steering. The rigid axle was located with
twin trailing arms and a watts linkage. The DB 4 was one of the very first models to feature disc brakes
all round.
Retaining the dashboard inherited from the DB 2/4Mk3, the seats were a major improvement in both comfort
and ease of adjustment.
PRODUCTION HISTORY
Model Series Years of Manufacture Number Produced Chassis No Sequence
DB4 all series (excls 1958 to 1963 1,110 DB4/101/R to
DB4 GT and variants) DB4/995/R and
DB4/1001/L to
DB4/1215/L
DB4 GT (all variants) 1959 to 1963 95 DB4/GT/0101/L to
DB4/GT/0201/L
excepting 0192 and
0194 to 0198
DB4 Series1 1959 150 DB4/101/R to
DB4/250/L
DB4 Series 2 1960 to 1961 350 DB4/251/L to
DB4/600/R
DB4 Series 3 1961 165 DB4/601/R to
DB4/765/R
DB4 Series 4 1961 to 1962 230 DB4/766/R to
DB4/950/R
DB4 Series 4 Vantage 1962 45 DB4/951 to DB4/995/R
– all with special
series engines
DB4 Series 5 1962 to 1963 145 DB/1001/R to
DB4/1050/R &
DB4/1176/R to
DB4/1215/L
DB4 Series 4 1961 to 1962 30 DB4C/1051/R to
Convertibles DB4C/1080
DB4 Series 5 1962 to 1963 40 DB4C/1081/L to
Convertibles DB4C/1110/L &
DB4C/1176/R to
DB4C/1175/L
DB4 GT Coupe 1959 to 1963 75 DB4GT/0101 to 0201
excepting 0192 &
0194-0198
DB4 GT Zagato 1961 to 1962 19 DB4GT/0176/R to 0191
DB4 GT Bertone Jet 1962 1 DB4 GT/0201/L
DB4 GT Zagato 1991 6 DB4GT/0192 & 0196 –
Sanction II & III 0198 plus Sanction III
DB4/344/R &
DB4/424/R All bodied
by ZAGATO Italy.
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 124
Engine
CC 3,670 cc
Cylinders 6
General Dohc – twin 2 in HD8 SUs
Compression Ratio 8.2 to 1
Max Torque 240 lb ft at 4,250 rpm
Power 240 bhp net at 5,500 rpm (DB4 GT with triple Weber – 302 bhp net
at 6,000 rpm)
Transmission
Clutch single dry plate hydraulically operated
Gearbox 4 spd all syncromesh
Final Drive Hypoid bevel 3.31 to 1
Overall Gear Rations
1st 9.67 :1
2nd 6.14 :1
3rd 4.14 :1
4th 3.31 :1
Reverse 9.67 :1
Suspension
Front Type Independent by double wishbone and anti roll bar
Rear Type Rigid axle with twin trailing arms and Watts linkage
Brakes
Front Disc 11.5in hydraulic (Dunlop 2 pot)
Rear Disc 11.2in hydraulic (Dunlop 2 pot)
Wheels
16 in with 6.00 16in tyres
Weight
27.4 cwt net
Dimensions
Length 14 ft 9in
Width 5 ft 6in
Height 4 ft 4in
SPECIFICATION
Max Speed
141 mph
Acceleration
0 – 30 mph 3.5 secs
0 - 60 mph 8.5 secs
0 – 100 mph 21.7 secs
40 – 60 mph 8.9 secs in top
50 – 70 mph 8.7 secs in top
Standing Quarter 16.1 secs
Fuel Consumption
Touring 18 mpg
Overall 16 mpg
PERFORMANCE
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 126
DB5
The model incorporated a long list of minor improvements inherited from the DB4. It introduced the 4 litre
engine, a higher equipment specification and an alternator, one of the first applications in a production car.
Divided brake circuits and uprated brakes also arrived with the DB5. It standardised the cowled headlamps,
first seen with the DB4 GT. It also came with an oil cooler as standard.
When first announced, the only transmission option available was the 4 speed David Brown gearbox carried
over from the DB4. Within a few months of introduction, it was announced that henceforward, cars would be
equipped with a 5 speed ZF gearbox as standard. A 3-speed Borg Warner auto was available to order at
additional cost.
Apart from being, in many eyes, the model of choice for anyone wishing to own a DB4, 5 or 6, the key event
that was to set the DB5 aside from all others was the James Bond connection. In today’s internet dominated
environment, it is easy to forget the impact that the Goldfinger DB5 with its ejector seat, smoke generator,
machine guns and extendable tyre and body shredders had on every hot blooded car enthusiast and small boy
in 1964. With Aston Martin now connected irrevocably and permanently to James Bond, the demand for Bond
car replicas will remain and with it, a cache that no amount of money could buy today.
Despite this, the DB5 deserves its place as one of the great sports GT cars of its period. It had all the right
ingredients, rarity, speed and an integrity and quality that ooze out of every pore; handling that was very good
and an ability to take 2 people very quickly and comfortably across the continent. It has an expensive and
sophisticated sounding engine, which is very powerful but also flexible and which is unique to Aston Martin.
While British to a tee, it has that rare quality that is exclusive and expensive yet would blend within any
location from the poorest to the most fashionable anywhere on the globe. It is a combination of qualities that
with few exceptions, Aston Martin has preserved in a way no other marque has equalled ever since.
PRODUCTION HISTORY
Model Series Years of Manufacture Number Produced Chassis No Sequence
DB5 all variants 1963 to 1965 1019 DB5C/1251/R to
DB5/2275/L excepting
2021, 2094, 2124
& 2125
DB5 Saloons 1963 to 1965 896 DB5/1301/L to
DB5/1500/R &
DB5/1526/R to
DB5/1900/R &
DB5/1926/R to
DB5/2100/R
DB5 Convertibles 1963 to 1965 123 DB5C/1251/L to
DB5C/1300/R &
DB5C/1501/R to
DB5C/1525/R &
DB5C/1901/L to
DB5C/1925/R
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 128
Engine
CC 3,995 cc
Cylinders 6
General Dohc triple 2in HD8 SU (optional triple Weber 45 DCOE 9)
Compression Ratio 8.9 to 1 (Vantage 9.00 to 1)
Max Torque 280 lbft at 4,500 rpm (Vantage 290 at 4,500)
Power 282 bhp net at 5,500 rpm (Vantage 302 bhp and 5,500 rpm)
Transmission
Clutch Single dry plate Laycock hydraulic
Gearbox 5spd all Synchromesh
Final Drive Hypoid 3.77 to 1 later 3.73 to 1
Overall Gear Rations
1st 10.18 :1
2nd 6.64 :1
3rd 4.64 :1
4th 3.77 ;1
Reverse 3.14 ;1
Suspension
Front Type Independent by double wishbone and anti roll bar
Rear Type Rigid axle with twin trailing arms and Watts linkage
Brakes
Front 11.5in Disc Girling 3 pot
Rear 10.8in Disc Girling 3 pot
Wheels
15 in 6.70 15 Tyres
Weight
29.6 cwt net
Dimensions
Length 15 ft 2in
Width 5 ft 6in
Height 4 ft 4.5in
SPECIFICATION
Max Speed
143 mph
Acceleration
0 – 30 mph 3.4 secs
0 - 60 mph 8.1 secs
0 – 100 mph 25.7 secs
40 – 60 mph 6.9 in 4th gear, 9.3 in 5th gear
50 – 70 mph 6.9 in 4th gear, 9.3 in 5th gear
Standing Quarter 16.0
Fuel Consumption
Touring 18 mpg
Overall 15 mpg
PERFORMANCE
DB MkIII book latest copy 2:Layout 1 2/12/10 12:05 Page 130
APPENDIX B
Letters etc.
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 132
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 134
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 136
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 138
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 140
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 142
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 144
APPENDIX C
Restoration Notes
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 146
PURCHASE NAME: - THE AFRICORE MINING COMPANY Car No.AM300/3/1815
49/ BERKELEY SQUARE.LONDON.W.I. Reg. No.
GUARANTEED ISSUED : - 24.4.59 GURANTEE EXPIRES :- 23.4.60
DELIVERED :- 24.4.59 SHIPPED :-
AGENT :- DIRECT 24.4.59 YEAR OF MANUFACTURE :-
PARTICULARS PARTICULARS OF NON-STANDARD EQUIPMENT3
TYPE ASTON MARTIN DB MK.IIIENGINE NO. DBA/1404CHASSIS NO. AM.300/3/1815 RHDCARBURETTOR TWIN S.U. HV 6DYNAMO LUCASSTARTER LUCASGEAR BOX DBCW/S/396SPEEDO GEARSREAR AXLE RATIO 3.77 :1SHOCK ABSORBERS ARMSTRONGFOG LAMPSCIGAR LIGHTERSPEEDOMETER SMITHSPLUGS KL.F.100 SINGLE POINT 14 mmTYRES AVON TURBO SPEEDBODY TYPE SALOONBODY MANUFACT. TICKFORDBODY NO. T.S. 548BODY COLOUR SEA GREEN MANFRS I.CI. M035-2557TRIMING OFF WHITE MANFRS CONOLLY VM. 3323HOOD and COVERSLIDING ROOFWIRELESSHEATERREAR AXLE NO. B58/450BATTERY NO. M12- 10KEY NO. FP. 737
Front Disc Brakes, rearAlfin drums.
Date Service work Car No. AM/300/1815
4.5.59 R.1665 1st Service carried out. Oil filter changed. Mileage 633.4.5.59 CR.96815 Engine tuned, set of 75 plugs fitted.
Clutch toggle arms oiled.Broken wire on heater switch repaired.Brake pads and linings cleaned up.Rear shoes set up. Rattle from nearside door rectified. Mileage 633
16.6.59 R.1608. 2nd Service carried out. Engine refilled with XXL G.P. digits fitted.Radio fitted. Mileage 6954
16.6.59 GR 96815. Engine checked and tuned.Head lamp and flasher switches changed.Boot lid rectified. Mileage 3954
14.7.59 GR 96815.Oil in speedometer attended to. Radio rectified. Mileage 5793
21.9.59 R.2108. Plus cleaned and reset. Points cleaned and adjusted.Petrol filters and carburettors cleaned. Engine refilled with XXL.New cleaning element fitted. Engine tuned.Clutch pedal mechanism and brakes adjusted.1 new Windscreen wiper blade fitted to nearside.Gearbox and rear axle oils changed.Oils in steering box and front suspension checked.Chassis points greased and lubricated.Shock absorbers, brake and clutch reservoir and battery topped.
Mileage 10061
21.9.59 GR 96815. 1st gear and layshaft changed.Radio rectified by Engineers.Nearside door rattles rectified.Trim on nearside of boot re – stuck. Mileage 10061
9.11.59 R.2273. Plugs cleaned and reset. Points cleaned and adjusted.Petrol filters and carburettors cleaned.Engine tuned.3 wheels rebalanced after fitting new Tyres.Heater attended to and controls adjusted.New wiper blade and arm fitted to drivers side of windscreen.
(Replacement speedometer and cable fitted FOC) Mileage 1149
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 148
Date Service work Car No. AM/300/1815
14.3.60 R2668 Timing chains adjusted. Plugs cleaned & reset. New contact setfitted to Distributor Cap segments cleaned.Petrol filters & Carbs; cleaned.Engine refilled with shell X100 30 SAE. Engine tuned.G/Box & R/Axle oils changed.Oils in steering box & front suspension checked.Chassis points Greased & lubricated.S/A’s brake & clutch rest & battery topped.H/Brake adjusted.N/S door rectified. Rattles from boot lid attended to.Exit; paint- work cleaned & wax polished. Mileage 6082
R.2975 Plugs cleaned & adjusted. Points cleaned & reset.New seals fitted to front & r/of both camshafts. New gaskets fitted.Sticking accelerator attended to.R/Brake shoes relined. New set of front brake pad assemblies fitted.Wheels rebalanced after fitting new tyres and tubes.Brakes bled. R/Brakes adjusted.New N/S/R/ axle shaft oil seal fitted.Hub bearings shimmed & adjusted.G/Box tunneling red-drilled for radio controls.New H/lamp flasher switch assy; fitted.New bulb fitted to rev. counter panel light. Mileage 11286
19.9.60 R.3328. Plugs cleaned & reset. Points cleaned & adjusted.Cap segments cleaned.Engine refilled with XXL. Engine tuned. Brake linings cleaned up on bench.R/Brake shoe expanders freed off & lubricated. New H/Brake cableassy; fitted. Braking system bled. R/brakes adjusted.New thrust finger fitted to clutch slave cyl;Oils in G/Box, R/axle, steering box & front suspension checked.Full lubrication service carried out.Bootlid & N/S door attended to. Mileage 17473
Date Service work Car No. AM300/3/1815
17.11.60 R.3445. Repairs carried out due to accident. Mileage 17982
17.11.60 R.6445/1. Plugs cleaned & reset.Cap segments & rotor striker cleaned.Points cleaned & adjusted.Petrol filters & Carbs cleaned.New jet tubes & needles fitted.Float levels reset. Engine tuned.New steering box oil seal fitted.Bearings shimmed & adjusted.Bix refilled with oil.New silencer fitted.
1 new bolt fitted to Prop Shaft coupling & remaining bolts tightened.Spare wheel tray freed off & adjusted.
New bolt fitted to boot lid stay.Screws on W/screen washer jets.Changed. New N/S Int. Light fitted.Various body Rects, carried out.Car re–cellulosed Snow shadow Grey. Mileage 17982.
05.01.61 R.3720. Battery and terminals cleaned.Operation of petrol pumps checked. Petrol gauge checked and calibrated.Wheels re-balanced after Fitting 5 new Dunlop tyres.Boot lock & control cable adjusted. Mileage 17982.
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 150
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 152
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 154
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 156
DB MkIII book latest copy 2:Layout 1 2/12/10 12:06 Page 158
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 160
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 162
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 164
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 166
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 168
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 170
DB MkIII book latest copy 2:Layout 1 2/12/10 12:07 Page 172
DB MkIII book latest copy 2:Layout 1 2/12/10 12:08 Page 174
DB MkIII book latest copy 2:Layout 1 2/12/10 12:08 Page 176
DB MkIII book latest copy 2:Layout 1 2/12/10 12:08 Page 178
DB MkIII book latest copy 2:Layout 1 2/12/10 12:08 Page 180
A Living Legend Productionfrom
Aston WorkshopProduced for Ronald D. Powell owner DB MKIII WYE 847
by Clive Dickinson and Quentin Parker
www.aston.co.uk 0044 1207 233 525
DB MkIII book latest copy 2:Layout 1 2/12/10 12:08 Page 182
top related