autocad 2d1

AutoCAD 2D1

By : Cesar Mendoza

Draw the Borderline and Title Block

200

265

330

15

15BORDER

NAME: TITLE: SECTION: DATE: SCALE

100

Drawing frame

Title block

Draw border line 15mm from edge of paper

15 mm

Draw title block 15 mm away from bottom border line

100 mm200 mm

265 mm

330 mm

Draw guideline for the title block: Name, title, section

100 mm200 mm

265 mm

330 mm

Draw the dividing line for the working space

200 mm

Draw the dividing line for the working space

200 mm

Write your name and complete the inforamtion in the title block

MOHAMMED AL SHAMSI

Get the center of the working space by striking thin diagonal line from the corner

200 mm

Draw the Circle with radius 45mm

Draw the centerline (long short stroke) of the circle

Draw a 45 degree diagonal line passing to the center of the circle

Draw the broken line and make a square passing to the diagonal lines.

Draw the first “V” inside the circle, vertex on the horizontal line (use thick line or object line)

Draw the second “V” inside the circle, vertex on the vertial line (use thick line or object line)

Make another “V” on the vertical line

Lastly,make the last “V” on the horizontal line

Make a square with the corners on the horizontal and vertical centeline

Locate center of the working space on the second box by striking thin diagonal line from the corner

200 mm

From the center measure 50mm below and construct a thin line

50 mm

From the center line make a 50 mm thick line

50 mm

From the end of the line strike arc to get the center of the circle

From the other end of the line strike arc to get the center of the arc.

Draw the circle of the hexagon

From the end the line strike arc to get the point of the hexagon

From the end strike arc to get the point of the hexagon

From the end strike arc to get the point of hexagon

From the end strike arc to get the point of the hexagon

Connect the corner points of the hexagon (use thick line)

Connect the corner points of the hexagon (use thick line)

Connect the corner points of the hexagon (use thick line)