basics of combustion
Post on 23-Feb-2016
36 Views
Preview:
DESCRIPTION
TRANSCRIPT
Basics of Combustion
Training onTechnologies for Converting Waste Agricultural Biomass into Energy
Organized by United Nations Environment Programme (UNEP DTIE IETC)
23-25 September, 2013San Jose, Costa Rica
Surya Prakash ChandakSenior Programme Officer
International environmental Technology CentreDivision of Technology, Industry and Economics
Osaka, Japan
• Combustion Generation of heat through rapid chemical reactions of
fuels is known as combustion
• Products of Combustion- CO2
- H2O- NO2
- SO2
- CO, - HCs, - NOX, SOX, ….
BASICS OF COMBUSTION
Complete Combustion
Incomplete Combustion
Main parameters for proper combustion- Temperature: To initiate and sustain combustion- Turbulence: For proper mixing of fuel and air- Time: Sufficient for complete combustion
BASICS OF COMBUSTION
3T’s : Time, Temperature, Turbulence
• Combustion Flame of different fuels
BASICS OF COMBUSTION
• Combustion Reactions During combustion, molecules undergo chemical
reactions. The reactant atoms are rearranged to form new
combinations (oxidized). The chemical reaction can be presented by reaction
equations. However, reaction equations represent initial and final
results and do not indicate the actual path of the reaction, which may involve many intermediate steps and intermediate products.
This approach is similar to thermodynamics system analysis, where only end states and not path mechanism are used.
BASICS OF COMBUSTION
• Combustion Reactions
Types of combustion reactions:- Exothermic: Heat is released- Endothermic: Heat is absorbed
BASICS OF COMBUSTION
• Combustion Reactions BASICS OF COMBUSTION
ExothermicEndothermicC + 4H + 4O
Break two “O=O” bonds
+ 988 kJ/molC + 4H + 2O2
Break four “C-H” bonds
+ 1644 kJ/mol
CH4 + 2O2 (Reactants)
Form two “C=O” bonds
-1598 kJ/mol
CO2 + 4H + 2O
Form four “O-H” bonds
-1836 kJ/mol
CO2 + 2H2O (Products)
Net energy change-802 kJ/molExothermic – gives off heat energy
+2000
+1000
0
-1000
+3000
• Combustion Reactions Some fundamental reactions of combustion:
C + O2 CO2 + 33.8 MJ/kg-C 2H2 + O2 2H2O + 121.0 MJ/kg-H S + O2 SO2 + 9.3 MJ/kg-S 2C + O2 2CO + 10.2 MJ/kg-C
Note: Above equations are in accordance with conservation of mass. For example consider the first reaction:- 1 kmol C + 1 kmol O2 1 kmol CO2, or- 12 kg C + 32 kg O2 44 kg CO2, or - 0 vol. C + 1 vol. O2 1 vol. CO2.
BASICS OF COMBUSTION
• Combustion Reactions In fuels, the combustion reactions are more complex than
above: In general, air is used in combustion than pure oxygen Fuels consists of many elements such as C, H, N, S, O In addition to complete combustions, fuels undergo incomplete
combustions too. Heat generation during combustion:
- Combustion reactions together with enthalpies of components could be used to predict the net heat generation.
- This needs identification of all the combustion products.
BASICS OF COMBUSTION
• Composition of Air On a molar (or volume) basis, dry air is composed of:
– 20.9% oxygen O2
– 78.1% nitrogen N2
– 0.9% CO2, Ar, He, Ne, H2, and others
A good approximation of this by molar or volume is: 21% oxygen, 79% nitrogen
Thus, each mole of oxygen is accompanied 0.79/0.21 = 3.76 moles of nitrogen
BASICS OF COMBUSTION
• Composition of Air At ordinary combustion temperatures, N2 is inert, but
nonetheless greatly affects the combustion process because its abundance, and hence its enthalpy change, plays a large part in determining the reaction temperatures.
- This, in turn, affects the combustion chemistry.
- Also, at higher temperatures, N2 does react, forming species such as oxides of nitrogen (NOx), which are a significant pollutant.
BASICS OF COMBUSTION
• Stoichiometry and Air/Fuel Ratios Oxidation all the elements or components in a fuel is known
as complete combustion or “Stoichiometric Combustion”. The amounts of fuel and air taking part in a combustion
process are often expressed as the ‘air to fuel’ ratio:
Minimum amount of air (or oxygen) required to have a complete combustion is represented by Stoichiometric Ratio AFRstoich.
For a fuel CxHyOz
BASICS OF COMBUSTION
.
16122432.34
Stoich zyxzyxAFR
.fuel
air
mmAFR
• Stoichiometry and Air/Fuel Ratios Eg: Combustion of Methane
CH4 + 2(O2 + 79/21N2 ) CO2 + 2H2O + 158/21N2
Therefore, AFRStoich = (232 + 22879/21)/(12 + 41) = 17.16
BASICS OF COMBUSTION
Fuel Phase AFRStoichVery light fuel oil liquid 14.27Light fuel oil liquid 14.06Medium heavy fuel oil liquid 13.79Heavy fuel oil liquid 13.46Generic Biomass solid 5.88Coal A solid 6.97LPG (90 P : 10 B) gas 15.55Carbon solid 11.44
• Stoichiometry and Air/Fuel Ratios In order to obtain complete combustion, supply of excess
amount of air (or oxygen) is required in practice. The amount of excess air required depends on the
properties of the fuel and the technology of the combustion device.
Amount of excess air is usually represented by the equivalence ratio, φ, or the ‘lambda’ ratio λ:
BASICS OF COMBUSTION
• Stoichiometry and Air/Fuel Ratios Eg:
BASICS OF COMBUSTION
Fuel Type of Furnace or Burners Excess air % by weight
Pulverized Coal
Completely water-cooled furnace for slag-tap or dry-ash-removal
Partially water cooled furnace for dry-ash-removal
15 – 2015 - 40
Crushed coal Cyclone furnace – pressure or suction 10 - 15
Coal
Spreader stroker Water-cooled vibrating grate stroker Chain-grate and traveling grate strokers Underfeed stroker
30 – 6030 – 6015 – 5020 - 50
Fuel oil Oil burners, register type Multi-fuel burners and flat-flame
5 – 1010 - 20
Acid sludge Cone and flat-plate-type burners, steam-atomized 10 - 15Natural coke ovens and refinery gas
Register-type burners Multi-fuel burners
5 – 107 - 12
Blast furnace gas Intertube nozzle-type burners 15 - 18Wood Dutch oven and Hofft-type 35 – 50Bagasse All furnaces 25 - 35Black liquor Recovery furnace for kraft and soda-pulping processes 5 - 7
• Combustion Reactions of Fuels Complete combustion of hydrocarbons:
Incomplete combustion of hydrocarbons :
BASICS OF COMBUSTION
Heat.N42176.3OH
2CON76.3O
421OCH 22222xy
xyyxy
Heat.N76.3OHCO
ONOCHHCON76.3OOHC
222
2X4222zyx
p
srp
• Estimation of Heating Values Eg: Methane:
CH4 + 2(O2 + 79/21N2 ) CO2 + 2H2O + 158/21N2
EnthalpiesCH4 : -4.667 MJ/kg; O2 : 0.0; N2 : 0.0
CO2 : -8.942 MJ/kg; H2O : -13.423 MJ/kg (Gas) / -15.866 MJ/kg (Liquid)
(i) Net Calorafic Value NCV = - (Hproducts – Hreactants)/mass of CH4
= - [{-8.94244 + -13.423218} – {-4.66716}]/16 = 50.125 MJ/kg
(ii) Gross Calorafic Value GCV = - (Hproducts – Hreactants)/mass of CH4
= - [{-8.94244 + -15.866218} – {-4.66716}]/16 = 55.622 MJ/kg
Note: NCV = GCV – (Mwater/Mmethane)hfg = 55.622 – (36/16)2.443 = 50.125 MJ/kg.
BASICS OF COMBUSTION
top related